* [edk2-devel] [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for LoongArch64
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
@ 2023-11-06 3:26 ` Chao Li
2023-11-07 3:30 ` Michael D Kinney
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU function set into BaseCpuLib Chao Li
` (31 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:26 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Adding Csr.h for LoongArch64, it is use for accessing the CSR registers.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Register/LoongArch64/Csr.h | 221 ++++++++++++++++++++++
1 file changed, 221 insertions(+)
create mode 100644 MdePkg/Include/Register/LoongArch64/Csr.h
diff --git a/MdePkg/Include/Register/LoongArch64/Csr.h b/MdePkg/Include/Register/LoongArch64/Csr.h
new file mode 100644
index 0000000000..b78d766b42
--- /dev/null
+++ b/MdePkg/Include/Register/LoongArch64/Csr.h
@@ -0,0 +1,221 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - EXC - Exception
+ - CSR - CPU Status Register
+**/
+
+#ifndef LOONGARCH_CSR_H_
+#define LOONGARCH_CSR_H_
+
+#include <Base.h>
+
+//
+// CSR register numbers
+//
+
+//
+// Basic CSR registers
+//
+#define LOONGARCH_CSR_CRMD 0x0
+#define LOONGARCH_CSR_PRMD 0x1
+#define LOONGARCH_CSR_EUEN 0x2
+#define CSR_EUEN_LBTEN_SHIFT 3
+#define CSR_EUEN_LBTEN (0x1ULL << CSR_EUEN_LBTEN_SHIFT)
+#define CSR_EUEN_LASXEN_SHIFT 2
+#define CSR_EUEN_LASXEN (0x1ULL << CSR_EUEN_LASXEN_SHIFT)
+#define CSR_EUEN_LSXEN_SHIFT 1
+#define CSR_EUEN_LSXEN (0x1ULL << CSR_EUEN_LSXEN_SHIFT)
+#define CSR_EUEN_FPEN_SHIFT 0
+#define CSR_EUEN_FPEN (0x1ULL << CSR_EUEN_FPEN_SHIFT)
+#define LOONGARCH_CSR_MISC 0x3
+#define LOONGARCH_CSR_ECFG 0x4
+
+#define LOONGARCH_CSR_ESTAT 0x5
+#define CSR_ESTAT_ESUBCODE_SHIFT 22
+#define CSR_ESTAT_ESUBCODE_WIDTH 9
+#define CSR_ESTAT_ESUBCODE (0x1ffULL << CSR_ESTAT_ESUBCODE_SHIFT)
+#define CSR_ESTAT_EXC_SHIFT 16
+#define CSR_ESTAT_EXC_WIDTH 6
+#define CSR_ESTAT_EXC (0x3FULL << CSR_ESTAT_EXC_SHIFT)
+#define CSR_ESTAT_IS_SHIFT 0
+#define CSR_ESTAT_IS_WIDTH 15
+#define CSR_ESTAT_IS (0x7FFFULL << CSR_ESTAT_IS_SHIFT)
+
+#define LOONGARCH_CSR_ERA 0x6
+#define LOONGARCH_CSR_BADV 0x7
+#define LOONGARCH_CSR_BADI 0x8
+#define LOONGARCH_CSR_EBASE 0xC // Exception entry base address
+
+//
+// TLB related CSR registers
+//
+#define LOONGARCH_CSR_TLBIDX 0x10 // TLB Index, EHINV, PageSize, NP
+#define LOONGARCH_CSR_TLBEHI 0x11 // TLB EntryHi
+#define LOONGARCH_CSR_TLBELO0 0x12 // TLB EntryLo0
+#define LOONGARCH_CSR_TLBELO1 0x13 // TLB EntryLo1
+#define LOONGARCH_CSR_ASID 0x18 // ASID
+#define LOONGARCH_CSR_PGDL 0x19 // Page table base address when VA[47] = 0
+#define LOONGARCH_CSR_PGDH 0x1A // Page table base address when VA[47] = 1
+#define LOONGARCH_CSR_PGD 0x1B // Page table base
+#define LOONGARCH_CSR_PWCTL0 0x1C // PWCtl0
+#define LOONGARCH_CSR_PWCTL1 0x1D // PWCtl1
+#define LOONGARCH_CSR_STLBPGSIZE 0x1E
+#define LOONGARCH_CSR_RVACFG 0x1F
+
+//
+// Config CSR registers
+//
+#define LOONGARCH_CSR_CPUNUM 0x20 // CPU core number
+#define LOONGARCH_CSR_PRCFG1 0x21 // Config1
+#define LOONGARCH_CSR_PRCFG2 0x22 // Config2
+#define LOONGARCH_CSR_PRCFG3 0x23 // Config3
+
+//
+// Kscratch registers
+//
+#define LOONGARCH_CSR_KS0 0x30
+#define LOONGARCH_CSR_KS1 0x31
+#define LOONGARCH_CSR_KS2 0x32
+#define LOONGARCH_CSR_KS3 0x33
+#define LOONGARCH_CSR_KS4 0x34
+#define LOONGARCH_CSR_KS5 0x35
+#define LOONGARCH_CSR_KS6 0x36
+#define LOONGARCH_CSR_KS7 0x37
+#define LOONGARCH_CSR_KS8 0x38
+
+//
+// Stable timer registers
+//
+#define LOONGARCH_CSR_TMID 0x40 // Timer ID
+#define LOONGARCH_CSR_TMCFG 0x41
+#define LOONGARCH_CSR_TMCFG_EN (1ULL << 0)
+#define LOONGARCH_CSR_TMCFG_PERIOD (1ULL << 1)
+#define LOONGARCH_CSR_TMCFG_TIMEVAL (0x3FFFFFFFFFFFULL << 2)
+#define LOONGARCH_CSR_TVAL 0x42 // Timer value
+#define LOONGARCH_CSR_CNTC 0x43 // Timer offset
+#define LOONGARCH_CSR_TINTCLR 0x44 // Timer interrupt clear
+
+//
+// TLB refill exception base address
+//
+#define LOONGARCH_CSR_TLBREBASE 0x88 // TLB refill exception entry
+#define LOONGARCH_CSR_TLBRBADV 0x89 // TLB refill badvaddr
+#define LOONGARCH_CSR_TLBRERA 0x8a // TLB refill ERA
+#define LOONGARCH_CSR_TLBRSAVE 0x8b // KScratch for TLB refill exception
+#define LOONGARCH_CSR_TLBRELO0 0x8c // TLB refill entrylo0
+#define LOONGARCH_CSR_TLBRELO1 0x8d // TLB refill entrylo1
+#define LOONGARCH_CSR_TLBREHI 0x8e // TLB refill entryhi
+
+//
+// Direct map windows registers
+//
+#define LOONGARCH_CSR_DMWIN0 0x180 // 64 direct map win0: MEM & IF
+#define LOONGARCH_CSR_DMWIN1 0x181 // 64 direct map win1: MEM & IF
+#define LOONGARCH_CSR_DMWIN2 0x182 // 64 direct map win2: MEM
+#define LOONGARCH_CSR_DMWIN3 0x183 // 64 direct map win3: MEM
+//
+// CSR register numbers end
+//
+
+//
+// IOCSR register numbers
+//
+#define LOONGARCH_IOCSR_FEATURES 0x8
+#define IOCSRF_TEMP (1ULL << 0)
+#define IOCSRF_NODECNT (1ULL << 1)
+#define IOCSRF_MSI (1ULL << 2)
+#define IOCSRF_EXTIOI (1ULL << 3)
+#define IOCSRF_CSRIPI (1ULL << 4)
+#define IOCSRF_FREQCSR (1ULL << 5)
+#define IOCSRF_FREQSCALE (1ULL << 6)
+#define IOCSRF_DVFSV1 (1ULL << 7)
+#define IOCSRF_EXTIOI_DECODE (1ULL << 9)
+#define IOCSRF_FLATMODE (1ULL << 10)
+#define IOCSRF_VM (1ULL << 11)
+
+#define LOONGARCH_IOCSR_VENDOR 0x10
+
+#define LOONGARCH_IOCSR_CPUNAME 0x20
+
+#define LOONGARCH_IOCSR_NODECNT 0x408
+
+#define LOONGARCH_IOCSR_MISC_FUNC 0x420
+#define IOCSR_MISC_FUNC_TIMER_RESET (1ULL << 21)
+#define IOCSR_MISC_FUNC_EXT_IOI_EN (1ULL << 48)
+
+#define LOONGARCH_IOCSR_CPUTEMP 0x428
+
+//
+// PerCore CSR, only accessable by local cores
+//
+#define LOONGARCH_IOCSR_IPI_STATUS 0x1000
+#define LOONGARCH_IOCSR_IPI_EN 0x1004
+#define LOONGARCH_IOCSR_IPI_SET 0x1008
+#define LOONGARCH_IOCSR_IPI_CLEAR 0x100c
+#define LOONGARCH_IOCSR_MBUF0 0x1020
+#define LOONGARCH_IOCSR_MBUF1 0x1028
+#define LOONGARCH_IOCSR_MBUF2 0x1030
+#define LOONGARCH_IOCSR_MBUF3 0x1038
+
+#define LOONGARCH_IOCSR_IPI_SEND 0x1040
+#define IOCSR_IPI_SEND_IP_SHIFT 0
+#define IOCSR_IPI_SEND_CPU_SHIFT 16
+#define IOCSR_IPI_SEND_BLOCKING (1ULL << 31)
+
+#define LOONGARCH_IOCSR_MBUF_SEND 0x1048
+#define IOCSR_MBUF_SEND_BLOCKING (1ULL << 31)
+#define IOCSR_MBUF_SEND_BOX_SHIFT 2
+#define IOCSR_MBUF_SEND_BOX_LO(box) (box << 1)
+#define IOCSR_MBUF_SEND_BOX_HI(box) ((box << 1) + 1)
+#define IOCSR_MBUF_SEND_CPU_SHIFT 16
+#define IOCSR_MBUF_SEND_BUF_SHIFT 32
+#define IOCSR_MBUF_SEND_H32_MASK 0xFFFFFFFF00000000ULL
+
+#define LOONGARCH_IOCSR_ANY_SEND 0x1158
+#define IOCSR_ANY_SEND_BLOCKING (1ULL << 31)
+#define IOCSR_ANY_SEND_CPU_SHIFT 16
+#define IOCSR_ANY_SEND_MASK_SHIFT 27
+#define IOCSR_ANY_SEND_BUF_SHIFT 32
+#define IOCSR_ANY_SEND_H32_MASK 0xFFFFFFFF00000000ULL
+
+//
+// Register offset and bit definition for CSR access
+//
+#define LOONGARCH_IOCSR_TIMER_CFG 0x1060
+#define LOONGARCH_IOCSR_TIMER_TICK 0x1070
+#define IOCSR_TIMER_CFG_RESERVED BIT63
+#define IOCSR_TIMER_CFG_PERIODIC BIT62
+#define IOCSR_TIMER_CFG_EN BIT61
+#define IOCSR_TIMER_MASK 0x0FFFFFFFFFFFFULL
+#define IOCSR_TIMER_INITVAL_RST (0xFFFFULL << 48)
+//
+// IOCSR register numbers end
+//
+
+//
+// Invalid addr with global=1 or matched asid in current TLB
+//
+#define INVTLB_ADDR_GTRUE_OR_ASID 0x6
+
+//
+// Bits 8 and 9 of FPU Status Register specify the rounding mode
+//
+#define FPU_CSR_RM 0x300
+#define FPU_CSR_RN 0x000 // nearest
+#define FPU_CSR_RZ 0x100 // towards zero
+#define FPU_CSR_RU 0x200 // towards +Infinity
+#define FPU_CSR_RD 0x300 // towards -Infinity
+
+#define DEFAULT_PAGE_SIZE 0x0c
+#define CSR_TLBIDX_SIZE_MASK 0x3f000000
+#define CSR_TLBIDX_PS_SHIFT 24
+#define CSR_TLBIDX_SIZE CSR_TLBIDX_PS_SHIFT
+#define CSR_TLBREHI_PS_SHIFT 0x0
+#define CSR_TLBREHI_PS 0x3f
+
+#endif
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110705): https://edk2.groups.io/g/devel/message/110705
Mute This Topic: https://groups.io/mt/102413840/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for LoongArch64
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for LoongArch64 Chao Li
@ 2023-11-07 3:30 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:30 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 7:26 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for
> LoongArch64
>
> Adding Csr.h for LoongArch64, it is use for accessing the CSR
> registers.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Register/LoongArch64/Csr.h | 221
> ++++++++++++++++++++++
> 1 file changed, 221 insertions(+)
> create mode 100644 MdePkg/Include/Register/LoongArch64/Csr.h
>
> diff --git a/MdePkg/Include/Register/LoongArch64/Csr.h
> b/MdePkg/Include/Register/LoongArch64/Csr.h
> new file mode 100644
> index 0000000000..b78d766b42
> --- /dev/null
> +++ b/MdePkg/Include/Register/LoongArch64/Csr.h
> @@ -0,0 +1,221 @@
> +/** @file
> +
> + Copyright (c) 2023 Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Glossary:
> + - EXC - Exception
> + - CSR - CPU Status Register
> +**/
> +
> +#ifndef LOONGARCH_CSR_H_
> +#define LOONGARCH_CSR_H_
> +
> +#include <Base.h>
> +
> +//
> +// CSR register numbers
> +//
> +
> +//
> +// Basic CSR registers
> +//
> +#define LOONGARCH_CSR_CRMD 0x0
> +#define LOONGARCH_CSR_PRMD 0x1
> +#define LOONGARCH_CSR_EUEN 0x2
> +#define CSR_EUEN_LBTEN_SHIFT 3
> +#define CSR_EUEN_LBTEN (0x1ULL << CSR_EUEN_LBTEN_SHIFT)
> +#define CSR_EUEN_LASXEN_SHIFT 2
> +#define CSR_EUEN_LASXEN (0x1ULL << CSR_EUEN_LASXEN_SHIFT)
> +#define CSR_EUEN_LSXEN_SHIFT 1
> +#define CSR_EUEN_LSXEN (0x1ULL << CSR_EUEN_LSXEN_SHIFT)
> +#define CSR_EUEN_FPEN_SHIFT 0
> +#define CSR_EUEN_FPEN (0x1ULL << CSR_EUEN_FPEN_SHIFT)
> +#define LOONGARCH_CSR_MISC 0x3
> +#define LOONGARCH_CSR_ECFG 0x4
> +
> +#define LOONGARCH_CSR_ESTAT 0x5
> +#define CSR_ESTAT_ESUBCODE_SHIFT 22
> +#define CSR_ESTAT_ESUBCODE_WIDTH 9
> +#define CSR_ESTAT_ESUBCODE (0x1ffULL <<
> CSR_ESTAT_ESUBCODE_SHIFT)
> +#define CSR_ESTAT_EXC_SHIFT 16
> +#define CSR_ESTAT_EXC_WIDTH 6
> +#define CSR_ESTAT_EXC (0x3FULL << CSR_ESTAT_EXC_SHIFT)
> +#define CSR_ESTAT_IS_SHIFT 0
> +#define CSR_ESTAT_IS_WIDTH 15
> +#define CSR_ESTAT_IS (0x7FFFULL << CSR_ESTAT_IS_SHIFT)
> +
> +#define LOONGARCH_CSR_ERA 0x6
> +#define LOONGARCH_CSR_BADV 0x7
> +#define LOONGARCH_CSR_BADI 0x8
> +#define LOONGARCH_CSR_EBASE 0xC // Exception entry base address
> +
> +//
> +// TLB related CSR registers
> +//
> +#define LOONGARCH_CSR_TLBIDX 0x10 // TLB Index, EHINV,
> PageSize, NP
> +#define LOONGARCH_CSR_TLBEHI 0x11 // TLB EntryHi
> +#define LOONGARCH_CSR_TLBELO0 0x12 // TLB EntryLo0
> +#define LOONGARCH_CSR_TLBELO1 0x13 // TLB EntryLo1
> +#define LOONGARCH_CSR_ASID 0x18 // ASID
> +#define LOONGARCH_CSR_PGDL 0x19 // Page table base
> address when VA[47] = 0
> +#define LOONGARCH_CSR_PGDH 0x1A // Page table base
> address when VA[47] = 1
> +#define LOONGARCH_CSR_PGD 0x1B // Page table base
> +#define LOONGARCH_CSR_PWCTL0 0x1C // PWCtl0
> +#define LOONGARCH_CSR_PWCTL1 0x1D // PWCtl1
> +#define LOONGARCH_CSR_STLBPGSIZE 0x1E
> +#define LOONGARCH_CSR_RVACFG 0x1F
> +
> +//
> +// Config CSR registers
> +//
> +#define LOONGARCH_CSR_CPUNUM 0x20 // CPU core number
> +#define LOONGARCH_CSR_PRCFG1 0x21 // Config1
> +#define LOONGARCH_CSR_PRCFG2 0x22 // Config2
> +#define LOONGARCH_CSR_PRCFG3 0x23 // Config3
> +
> +//
> +// Kscratch registers
> +//
> +#define LOONGARCH_CSR_KS0 0x30
> +#define LOONGARCH_CSR_KS1 0x31
> +#define LOONGARCH_CSR_KS2 0x32
> +#define LOONGARCH_CSR_KS3 0x33
> +#define LOONGARCH_CSR_KS4 0x34
> +#define LOONGARCH_CSR_KS5 0x35
> +#define LOONGARCH_CSR_KS6 0x36
> +#define LOONGARCH_CSR_KS7 0x37
> +#define LOONGARCH_CSR_KS8 0x38
> +
> +//
> +// Stable timer registers
> +//
> +#define LOONGARCH_CSR_TMID 0x40 // Timer ID
> +#define LOONGARCH_CSR_TMCFG 0x41
> +#define LOONGARCH_CSR_TMCFG_EN (1ULL << 0)
> +#define LOONGARCH_CSR_TMCFG_PERIOD (1ULL << 1)
> +#define LOONGARCH_CSR_TMCFG_TIMEVAL (0x3FFFFFFFFFFFULL << 2)
> +#define LOONGARCH_CSR_TVAL 0x42 // Timer value
> +#define LOONGARCH_CSR_CNTC 0x43 // Timer offset
> +#define LOONGARCH_CSR_TINTCLR 0x44 // Timer interrupt clear
> +
> +//
> +// TLB refill exception base address
> +//
> +#define LOONGARCH_CSR_TLBREBASE 0x88 // TLB refill exception
> entry
> +#define LOONGARCH_CSR_TLBRBADV 0x89 // TLB refill badvaddr
> +#define LOONGARCH_CSR_TLBRERA 0x8a // TLB refill ERA
> +#define LOONGARCH_CSR_TLBRSAVE 0x8b // KScratch for TLB refill
> exception
> +#define LOONGARCH_CSR_TLBRELO0 0x8c // TLB refill entrylo0
> +#define LOONGARCH_CSR_TLBRELO1 0x8d // TLB refill entrylo1
> +#define LOONGARCH_CSR_TLBREHI 0x8e // TLB refill entryhi
> +
> +//
> +// Direct map windows registers
> +//
> +#define LOONGARCH_CSR_DMWIN0 0x180 // 64 direct map win0: MEM & IF
> +#define LOONGARCH_CSR_DMWIN1 0x181 // 64 direct map win1: MEM & IF
> +#define LOONGARCH_CSR_DMWIN2 0x182 // 64 direct map win2: MEM
> +#define LOONGARCH_CSR_DMWIN3 0x183 // 64 direct map win3: MEM
> +//
> +// CSR register numbers end
> +//
> +
> +//
> +// IOCSR register numbers
> +//
> +#define LOONGARCH_IOCSR_FEATURES 0x8
> +#define IOCSRF_TEMP (1ULL << 0)
> +#define IOCSRF_NODECNT (1ULL << 1)
> +#define IOCSRF_MSI (1ULL << 2)
> +#define IOCSRF_EXTIOI (1ULL << 3)
> +#define IOCSRF_CSRIPI (1ULL << 4)
> +#define IOCSRF_FREQCSR (1ULL << 5)
> +#define IOCSRF_FREQSCALE (1ULL << 6)
> +#define IOCSRF_DVFSV1 (1ULL << 7)
> +#define IOCSRF_EXTIOI_DECODE (1ULL << 9)
> +#define IOCSRF_FLATMODE (1ULL << 10)
> +#define IOCSRF_VM (1ULL << 11)
> +
> +#define LOONGARCH_IOCSR_VENDOR 0x10
> +
> +#define LOONGARCH_IOCSR_CPUNAME 0x20
> +
> +#define LOONGARCH_IOCSR_NODECNT 0x408
> +
> +#define LOONGARCH_IOCSR_MISC_FUNC 0x420
> +#define IOCSR_MISC_FUNC_TIMER_RESET (1ULL << 21)
> +#define IOCSR_MISC_FUNC_EXT_IOI_EN (1ULL << 48)
> +
> +#define LOONGARCH_IOCSR_CPUTEMP 0x428
> +
> +//
> +// PerCore CSR, only accessable by local cores
> +//
> +#define LOONGARCH_IOCSR_IPI_STATUS 0x1000
> +#define LOONGARCH_IOCSR_IPI_EN 0x1004
> +#define LOONGARCH_IOCSR_IPI_SET 0x1008
> +#define LOONGARCH_IOCSR_IPI_CLEAR 0x100c
> +#define LOONGARCH_IOCSR_MBUF0 0x1020
> +#define LOONGARCH_IOCSR_MBUF1 0x1028
> +#define LOONGARCH_IOCSR_MBUF2 0x1030
> +#define LOONGARCH_IOCSR_MBUF3 0x1038
> +
> +#define LOONGARCH_IOCSR_IPI_SEND 0x1040
> +#define IOCSR_IPI_SEND_IP_SHIFT 0
> +#define IOCSR_IPI_SEND_CPU_SHIFT 16
> +#define IOCSR_IPI_SEND_BLOCKING (1ULL << 31)
> +
> +#define LOONGARCH_IOCSR_MBUF_SEND 0x1048
> +#define IOCSR_MBUF_SEND_BLOCKING (1ULL << 31)
> +#define IOCSR_MBUF_SEND_BOX_SHIFT 2
> +#define IOCSR_MBUF_SEND_BOX_LO(box) (box << 1)
> +#define IOCSR_MBUF_SEND_BOX_HI(box) ((box << 1) + 1)
> +#define IOCSR_MBUF_SEND_CPU_SHIFT 16
> +#define IOCSR_MBUF_SEND_BUF_SHIFT 32
> +#define IOCSR_MBUF_SEND_H32_MASK 0xFFFFFFFF00000000ULL
> +
> +#define LOONGARCH_IOCSR_ANY_SEND 0x1158
> +#define IOCSR_ANY_SEND_BLOCKING (1ULL << 31)
> +#define IOCSR_ANY_SEND_CPU_SHIFT 16
> +#define IOCSR_ANY_SEND_MASK_SHIFT 27
> +#define IOCSR_ANY_SEND_BUF_SHIFT 32
> +#define IOCSR_ANY_SEND_H32_MASK 0xFFFFFFFF00000000ULL
> +
> +//
> +// Register offset and bit definition for CSR access
> +//
> +#define LOONGARCH_IOCSR_TIMER_CFG 0x1060
> +#define LOONGARCH_IOCSR_TIMER_TICK 0x1070
> +#define IOCSR_TIMER_CFG_RESERVED BIT63
> +#define IOCSR_TIMER_CFG_PERIODIC BIT62
> +#define IOCSR_TIMER_CFG_EN BIT61
> +#define IOCSR_TIMER_MASK 0x0FFFFFFFFFFFFULL
> +#define IOCSR_TIMER_INITVAL_RST (0xFFFFULL << 48)
> +//
> +// IOCSR register numbers end
> +//
> +
> +//
> +// Invalid addr with global=1 or matched asid in current TLB
> +//
> +#define INVTLB_ADDR_GTRUE_OR_ASID 0x6
> +
> +//
> +// Bits 8 and 9 of FPU Status Register specify the rounding mode
> +//
> +#define FPU_CSR_RM 0x300
> +#define FPU_CSR_RN 0x000 // nearest
> +#define FPU_CSR_RZ 0x100 // towards zero
> +#define FPU_CSR_RU 0x200 // towards +Infinity
> +#define FPU_CSR_RD 0x300 // towards -Infinity
> +
> +#define DEFAULT_PAGE_SIZE 0x0c
> +#define CSR_TLBIDX_SIZE_MASK 0x3f000000
> +#define CSR_TLBIDX_PS_SHIFT 24
> +#define CSR_TLBIDX_SIZE CSR_TLBIDX_PS_SHIFT
> +#define CSR_TLBREHI_PS_SHIFT 0x0
> +#define CSR_TLBREHI_PS 0x3f
> +
> +#endif
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110788): https://edk2.groups.io/g/devel/message/110788
Mute This Topic: https://groups.io/mt/102413840/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU function set into BaseCpuLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for LoongArch64 Chao Li
@ 2023-11-06 3:26 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function set into BaseLib Chao Li
` (30 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:26 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Adding InitializeFloatingPointUnits, EnableFloatingPointUnits and
DisableFloatingPointUnits functions for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/CpuLib.h | 37 +++++++++++---
MdePkg/Library/BaseCpuLib/BaseCpuLib.inf | 7 ++-
.../Library/BaseCpuLib/LoongArch/DisableFpu.S | 17 +++++++
.../Library/BaseCpuLib/LoongArch/EnableFpu.S | 17 +++++++
.../BaseCpuLib/LoongArch/InitializeFpu.S | 51 +++++++++++++++++++
5 files changed, 121 insertions(+), 8 deletions(-)
create mode 100644 MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
create mode 100644 MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
create mode 100644 MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
diff --git a/MdePkg/Include/Library/CpuLib.h b/MdePkg/Include/Library/CpuLib.h
index 3f29937dc7..42da55ca69 100644
--- a/MdePkg/Include/Library/CpuLib.h
+++ b/MdePkg/Include/Library/CpuLib.h
@@ -8,6 +8,7 @@
As a result, these services could not be defined in the Base Library.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -41,14 +42,14 @@ CpuFlushTlb (
VOID
);
-#if defined (MDE_CPU_IA32) || defined (MDE_CPU_X64)
-
/**
+ Initialize the CPU floating point units.
+
Initializes floating point units for requirement of UEFI specification.
- This function initializes floating-point control word to 0x027F (all exceptions
- masked,double-precision, round-to-nearest) and multimedia-extensions control word
- (if supported) to 0x1F80 (all exceptions masked, round-to-nearest, flush to zero
- for masked underflow).
+ For IA32 and X64, this function initializes floating-point control word to 0x027F
+ (all exceptions masked,double-precision, round-to-nearest) and multimedia-extensions
+ control word (if supported) to 0x1F80 (all exceptions masked, round-to-nearest,
+ flush to zero for masked underflow).
**/
VOID
EFIAPI
@@ -56,6 +57,30 @@ InitializeFloatingPointUnits (
VOID
);
+/**
+ Enable the CPU floating point units.
+
+ Enable the CPU floating point units.
+**/
+VOID
+EFIAPI
+EnableFloatingPointUnits (
+ VOID
+ );
+
+/**
+ Disable the CPU floating point units.
+
+ Disable the CPU floating point units.
+**/
+VOID
+EFIAPI
+DisableFloatingPointUnits (
+ VOID
+ );
+
+#if defined (MDE_CPU_IA32) || defined (MDE_CPU_X64)
+
/**
Determine if the standard CPU signature is "AuthenticAMD".
@retval TRUE The CPU signature matches.
diff --git a/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf b/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
index 9a162afe6d..89f6272f11 100644
--- a/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+++ b/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
@@ -65,8 +65,11 @@
RiscV/Cpu.S
[Sources.LOONGARCH64]
- LoongArch/CpuFlushTlb.S | GCC
- LoongArch/CpuSleep.S | GCC
+ LoongArch/CpuFlushTlb.S | GCC
+ LoongArch/CpuSleep.S | GCC
+ LoongArch/InitializeFpu.S | GCC
+ LoongArch/EnableFpu.S | GCC
+ LoongArch/DisableFpu.S | GCC
[Packages]
MdePkg/MdePkg.dec
diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S b/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
new file mode 100644
index 0000000000..6cb253a416
--- /dev/null
+++ b/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
@@ -0,0 +1,17 @@
+#------------------------------------------------------------------------------
+#
+# DisableFloatingPointUnits() for LoongArch64
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(DisableFloatingPointUnits)
+
+ASM_PFX(DisableFloatingPointUnits):
+ li.w $t0, 0x1
+ csrxchg $zero, $t0, 0x2
+
+ jirl $zero, $ra, 0
+ .end
diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S b/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
new file mode 100644
index 0000000000..27d8243a59
--- /dev/null
+++ b/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
@@ -0,0 +1,17 @@
+#------------------------------------------------------------------------------
+#
+# EnableFloatingPointUnits() for LoongArch64
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(EnableFloatingPointUnits)
+
+ASM_PFX(EnableFloatingPointUnits):
+ li.w $t0, 0x1
+ csrxchg $t0, $t0, 0x2
+
+ jirl $zero, $ra, 0
+ .end
diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S b/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
new file mode 100644
index 0000000000..1b9d01c2c1
--- /dev/null
+++ b/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
@@ -0,0 +1,51 @@
+#------------------------------------------------------------------------------
+#
+# InitializeFloatingPointUnits() for LoongArch64
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+ASM_GLOBAL ASM_PFX(InitializeFloatingPointUnits)
+
+ASM_PFX(InitializeFloatingPointUnits):
+ li.d $t0, 0x0 // RNE mode
+ movgr2fcsr $r0, $t0
+ li.d $t1, -1 // SNaN
+
+ movgr2fr.d $f0, $t1
+ movgr2fr.d $f1, $t1
+ movgr2fr.d $f2, $t1
+ movgr2fr.d $f3, $t1
+ movgr2fr.d $f4, $t1
+ movgr2fr.d $f5, $t1
+ movgr2fr.d $f6, $t1
+ movgr2fr.d $f7, $t1
+ movgr2fr.d $f8, $t1
+ movgr2fr.d $f9, $t1
+ movgr2fr.d $f10, $t1
+ movgr2fr.d $f11, $t1
+ movgr2fr.d $f12, $t1
+ movgr2fr.d $f13, $t1
+ movgr2fr.d $f14, $t1
+ movgr2fr.d $f15, $t1
+ movgr2fr.d $f16, $t1
+ movgr2fr.d $f17, $t1
+ movgr2fr.d $f18, $t1
+ movgr2fr.d $f19, $t1
+ movgr2fr.d $f20, $t1
+ movgr2fr.d $f21, $t1
+ movgr2fr.d $f22, $t1
+ movgr2fr.d $f23, $t1
+ movgr2fr.d $f24, $t1
+ movgr2fr.d $f25, $t1
+ movgr2fr.d $f26, $t1
+ movgr2fr.d $f27, $t1
+ movgr2fr.d $f28, $t1
+ movgr2fr.d $f29, $t1
+ movgr2fr.d $f30, $t1
+ movgr2fr.d $f31, $t1
+
+ jirl $zero, $ra, 0
+ .end
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110706): https://edk2.groups.io/g/devel/message/110706
Mute This Topic: https://groups.io/mt/102413842/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU function set into BaseCpuLib
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU function set into BaseCpuLib Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: devel@edk2.groups.io, lichao@loongson.cn
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chao Li
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU
> function set into BaseCpuLib
>
> Adding InitializeFloatingPointUnits, EnableFloatingPointUnits and
> DisableFloatingPointUnits functions for LoongArch64.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/CpuLib.h | 37 +++++++++++---
> MdePkg/Library/BaseCpuLib/BaseCpuLib.inf | 7 ++-
> .../Library/BaseCpuLib/LoongArch/DisableFpu.S | 17 +++++++
> .../Library/BaseCpuLib/LoongArch/EnableFpu.S | 17 +++++++
> .../BaseCpuLib/LoongArch/InitializeFpu.S | 51
> +++++++++++++++++++
> 5 files changed, 121 insertions(+), 8 deletions(-)
> create mode 100644 MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
> create mode 100644 MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
> create mode 100644
> MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
>
> diff --git a/MdePkg/Include/Library/CpuLib.h
> b/MdePkg/Include/Library/CpuLib.h
> index 3f29937dc7..42da55ca69 100644
> --- a/MdePkg/Include/Library/CpuLib.h
> +++ b/MdePkg/Include/Library/CpuLib.h
> @@ -8,6 +8,7 @@
> As a result, these services could not be defined in the Base
> Library.
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> @@ -41,14 +42,14 @@ CpuFlushTlb (
> VOID
> );
>
> -#if defined (MDE_CPU_IA32) || defined (MDE_CPU_X64)
> -
> /**
> + Initialize the CPU floating point units.
> +
> Initializes floating point units for requirement of UEFI
> specification.
> - This function initializes floating-point control word to 0x027F
> (all exceptions
> - masked,double-precision, round-to-nearest) and multimedia-
> extensions control word
> - (if supported) to 0x1F80 (all exceptions masked, round-to-nearest,
> flush to zero
> - for masked underflow).
> + For IA32 and X64, this function initializes floating-point control
> word to 0x027F
> + (all exceptions masked,double-precision, round-to-nearest) and
> multimedia-extensions
> + control word (if supported) to 0x1F80 (all exceptions masked,
> round-to-nearest,
> + flush to zero for masked underflow).
> **/
> VOID
> EFIAPI
> @@ -56,6 +57,30 @@ InitializeFloatingPointUnits (
> VOID
> );
>
> +/**
> + Enable the CPU floating point units.
> +
> + Enable the CPU floating point units.
> +**/
> +VOID
> +EFIAPI
> +EnableFloatingPointUnits (
> + VOID
> + );
> +
> +/**
> + Disable the CPU floating point units.
> +
> + Disable the CPU floating point units.
> +**/
> +VOID
> +EFIAPI
> +DisableFloatingPointUnits (
> + VOID
> + );
> +
> +#if defined (MDE_CPU_IA32) || defined (MDE_CPU_X64)
> +
> /**
> Determine if the standard CPU signature is "AuthenticAMD".
> @retval TRUE The CPU signature matches.
> diff --git a/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> b/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> index 9a162afe6d..89f6272f11 100644
> --- a/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> +++ b/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> @@ -65,8 +65,11 @@
> RiscV/Cpu.S
>
> [Sources.LOONGARCH64]
> - LoongArch/CpuFlushTlb.S | GCC
> - LoongArch/CpuSleep.S | GCC
> + LoongArch/CpuFlushTlb.S | GCC
> + LoongArch/CpuSleep.S | GCC
> + LoongArch/InitializeFpu.S | GCC
> + LoongArch/EnableFpu.S | GCC
> + LoongArch/DisableFpu.S | GCC
>
> [Packages]
> MdePkg/MdePkg.dec
> diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
> b/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
> new file mode 100644
> index 0000000000..6cb253a416
> --- /dev/null
> +++ b/MdePkg/Library/BaseCpuLib/LoongArch/DisableFpu.S
> @@ -0,0 +1,17 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# DisableFloatingPointUnits() for LoongArch64
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +ASM_GLOBAL ASM_PFX(DisableFloatingPointUnits)
> +
> +ASM_PFX(DisableFloatingPointUnits):
> + li.w $t0, 0x1
> + csrxchg $zero, $t0, 0x2
> +
> + jirl $zero, $ra, 0
> + .end
> diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
> b/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
> new file mode 100644
> index 0000000000..27d8243a59
> --- /dev/null
> +++ b/MdePkg/Library/BaseCpuLib/LoongArch/EnableFpu.S
> @@ -0,0 +1,17 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# EnableFloatingPointUnits() for LoongArch64
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +ASM_GLOBAL ASM_PFX(EnableFloatingPointUnits)
> +
> +ASM_PFX(EnableFloatingPointUnits):
> + li.w $t0, 0x1
> + csrxchg $t0, $t0, 0x2
> +
> + jirl $zero, $ra, 0
> + .end
> diff --git a/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
> b/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
> new file mode 100644
> index 0000000000..1b9d01c2c1
> --- /dev/null
> +++ b/MdePkg/Library/BaseCpuLib/LoongArch/InitializeFpu.S
> @@ -0,0 +1,51 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# InitializeFloatingPointUnits() for LoongArch64
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +ASM_GLOBAL ASM_PFX(InitializeFloatingPointUnits)
> +
> +ASM_PFX(InitializeFloatingPointUnits):
> + li.d $t0, 0x0 // RNE mode
> + movgr2fcsr $r0, $t0
> + li.d $t1, -1 // SNaN
> +
> + movgr2fr.d $f0, $t1
> + movgr2fr.d $f1, $t1
> + movgr2fr.d $f2, $t1
> + movgr2fr.d $f3, $t1
> + movgr2fr.d $f4, $t1
> + movgr2fr.d $f5, $t1
> + movgr2fr.d $f6, $t1
> + movgr2fr.d $f7, $t1
> + movgr2fr.d $f8, $t1
> + movgr2fr.d $f9, $t1
> + movgr2fr.d $f10, $t1
> + movgr2fr.d $f11, $t1
> + movgr2fr.d $f12, $t1
> + movgr2fr.d $f13, $t1
> + movgr2fr.d $f14, $t1
> + movgr2fr.d $f15, $t1
> + movgr2fr.d $f16, $t1
> + movgr2fr.d $f17, $t1
> + movgr2fr.d $f18, $t1
> + movgr2fr.d $f19, $t1
> + movgr2fr.d $f20, $t1
> + movgr2fr.d $f21, $t1
> + movgr2fr.d $f22, $t1
> + movgr2fr.d $f23, $t1
> + movgr2fr.d $f24, $t1
> + movgr2fr.d $f25, $t1
> + movgr2fr.d $f26, $t1
> + movgr2fr.d $f27, $t1
> + movgr2fr.d $f28, $t1
> + movgr2fr.d $f29, $t1
> + movgr2fr.d $f30, $t1
> + movgr2fr.d $f31, $t1
> +
> + jirl $zero, $ra, 0
> + .end
> --
> 2.27.0
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110790): https://edk2.groups.io/g/devel/message/110790
Mute This Topic: https://groups.io/mt/102413842/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function set into BaseLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 01/30] MdePkg: Add the header file named Csr.h for LoongArch64 Chao Li
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 02/30] MdePkg: Add LoongArch64 FPU function set into BaseCpuLib Chao Li
@ 2023-11-06 3:26 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local interrupt " Chao Li
` (29 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:26 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Adding SetExceptionBaseAddress and SetTlbRebaseAddress functions
for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 20 +++++++++
MdePkg/Library/BaseLib/BaseLib.inf | 1 +
.../BaseLib/LoongArch64/ExceptionBase.S | 41 +++++++++++++++++++
3 files changed, 62 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index 5d7067ee85..a9a69c734c 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -229,6 +229,26 @@ typedef struct {
#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8
+/*
+ * Set the exception base address for LoongArch.
+ *
+ * @param ExceptionBaseAddress The exception base address, must be aligned greater than or qeual to 4K .
+ */
+VOID
+SetExceptionBaseAddress (
+ IN UINT64
+ );
+
+/*
+ * Set the TlbRebase address for LoongArch.
+ *
+ * @param TlbRebaseAddress The TlbRebase address, must be aligned greater than or qeual to 4K .
+ */
+VOID
+SetTlbRebaseAddress (
+ IN UINT64
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index 03c7b02e82..a18fe5efb4 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -419,6 +419,7 @@
LoongArch64/CpuPause.S | GCC
LoongArch64/SetJumpLongJump.S | GCC
LoongArch64/SwitchStack.S | GCC
+ LoongArch64/ExceptionBase.S | GCC
[Packages]
MdePkg/MdePkg.dec
diff --git a/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S b/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
new file mode 100644
index 0000000000..36c6ca7ca8
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
@@ -0,0 +1,41 @@
+#------------------------------------------------------------------------------
+#
+# LoongArch set exception base address operations
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+#include <Base.h>
+#include <Register/LoongArch64/Csr.h>
+
+ASM_GLOBAL ASM_PFX(SetExceptionBaseAddress)
+ASM_GLOBAL ASM_PFX(SetTlbRebaseAddress)
+
+#/**
+# Set the exception base address for LoongArch.
+#
+# @param ExceptionBaseAddress The exception base address, must be aligned greater than or qeual to 4K .
+#**/
+ASM_PFX(SetExceptionBaseAddress):
+ csrrd $t0, LOONGARCH_CSR_ECFG
+ li.d $t1, ~(BIT16 | BIT17 | BIT18)
+ and $t0, $t0, $t1
+ csrwr $t0, LOONGARCH_CSR_ECFG
+
+ move $t0, $a0
+ csrwr $t0, LOONGARCH_CSR_EBASE
+ jirl $zero, $ra, 0
+
+#/**
+# Set the TlbRebase address for LoongArch.
+#
+# @param TlbRebaseAddress The TlbRebase address, must be aligned greater than or qeual to 4K .
+#**/
+ASM_PFX(SetTlbRebaseAddress):
+ move $t0, $a0
+ csrwr $t0, LOONGARCH_CSR_TLBREBASE
+ jirl $zero, $ra, 0
+.end
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110707): https://edk2.groups.io/g/devel/message/110707
Mute This Topic: https://groups.io/mt/102413847/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function set into BaseLib
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function set into BaseLib Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function
> set into BaseLib
>
> Adding SetExceptionBaseAddress and SetTlbRebaseAddress functions
> for LoongArch64.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 20 +++++++++
> MdePkg/Library/BaseLib/BaseLib.inf | 1 +
> .../BaseLib/LoongArch64/ExceptionBase.S | 41
> +++++++++++++++++++
> 3 files changed, 62 insertions(+)
> create mode 100644 MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index 5d7067ee85..a9a69c734c 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -229,6 +229,26 @@ typedef struct {
>
> #define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8
>
> +/*
> + * Set the exception base address for LoongArch.
> + *
> + * @param ExceptionBaseAddress The exception base address, must be
> aligned greater than or qeual to 4K .
> + */
> +VOID
> +SetExceptionBaseAddress (
> + IN UINT64
> + );
> +
> +/*
> + * Set the TlbRebase address for LoongArch.
> + *
> + * @param TlbRebaseAddress The TlbRebase address, must be aligned
> greater than or qeual to 4K .
> + */
> +VOID
> +SetTlbRebaseAddress (
> + IN UINT64
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Library/BaseLib/BaseLib.inf
> b/MdePkg/Library/BaseLib/BaseLib.inf
> index 03c7b02e82..a18fe5efb4 100644
> --- a/MdePkg/Library/BaseLib/BaseLib.inf
> +++ b/MdePkg/Library/BaseLib/BaseLib.inf
> @@ -419,6 +419,7 @@
> LoongArch64/CpuPause.S | GCC
> LoongArch64/SetJumpLongJump.S | GCC
> LoongArch64/SwitchStack.S | GCC
> + LoongArch64/ExceptionBase.S | GCC
>
> [Packages]
> MdePkg/MdePkg.dec
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
> b/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
> new file mode 100644
> index 0000000000..36c6ca7ca8
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/ExceptionBase.S
> @@ -0,0 +1,41 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# LoongArch set exception base address operations
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +
> +#include <Base.h>
> +#include <Register/LoongArch64/Csr.h>
> +
> +ASM_GLOBAL ASM_PFX(SetExceptionBaseAddress)
> +ASM_GLOBAL ASM_PFX(SetTlbRebaseAddress)
> +
> +#/**
> +# Set the exception base address for LoongArch.
> +#
> +# @param ExceptionBaseAddress The exception base address, must be
> aligned greater than or qeual to 4K .
> +#**/
> +ASM_PFX(SetExceptionBaseAddress):
> + csrrd $t0, LOONGARCH_CSR_ECFG
> + li.d $t1, ~(BIT16 | BIT17 | BIT18)
> + and $t0, $t0, $t1
> + csrwr $t0, LOONGARCH_CSR_ECFG
> +
> + move $t0, $a0
> + csrwr $t0, LOONGARCH_CSR_EBASE
> + jirl $zero, $ra, 0
> +
> +#/**
> +# Set the TlbRebase address for LoongArch.
> +#
> +# @param TlbRebaseAddress The TlbRebase address, must be aligned
> greater than or qeual to 4K .
> +#**/
> +ASM_PFX(SetTlbRebaseAddress):
> + move $t0, $a0
> + csrwr $t0, LOONGARCH_CSR_TLBREBASE
> + jirl $zero, $ra, 0
> +.end
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110794): https://edk2.groups.io/g/devel/message/110794
Mute This Topic: https://groups.io/mt/102413847/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local interrupt function set into BaseLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (2 preceding siblings ...)
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 03/30] MdePkg: Add LoongArch64 exception function set into BaseLib Chao Li
@ 2023-11-06 3:26 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function Chao Li
` (28 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:26 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Adding LoongArch local interrupt function set, which is used to control
the opening or closing of the local interrupt when the global interrupt
is enabled.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 20 +++++++++++++++++
.../BaseLib/LoongArch64/DisableInterrupts.S | 22 ++++++++++++++-----
.../BaseLib/LoongArch64/EnableInterrupts.S | 22 ++++++++++++++-----
3 files changed, 54 insertions(+), 10 deletions(-)
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index a9a69c734c..93a014cd49 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -249,6 +249,26 @@ SetTlbRebaseAddress (
IN UINT64
);
+/**
+ Enables local CPU interrupts.
+
+ @param Needs to enable local interrupt bit.
+**/
+VOID
+EnableLocalInterrupts (
+ IN UINT16
+ );
+
+/**
+ Disables local CPU interrupts.
+
+ @param Needs to disable local interrupt bit.
+**/
+VOID
+DisableLocalInterrupts (
+ IN UINT16
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S b/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
index 0f228339af..5de10e9e7a 100644
--- a/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
+++ b/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
@@ -1,21 +1,33 @@
#------------------------------------------------------------------------------
#
-# LoongArch interrupt disable
+# LoongArch interrupt disable operations
#
-# Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
#------------------------------------------------------------------------------
+#include <Base.h>
+#include <Register/LoongArch64/Csr.h>
+
+ASM_GLOBAL ASM_PFX(DisableLocalInterrupts)
ASM_GLOBAL ASM_PFX(DisableInterrupts)
#/**
-# Disables CPU interrupts.
+# Disables local CPU interrupts.
+#
+# @param Needs to disable local interrupt bit.
#**/
+ASM_PFX(DisableLocalInterrupts):
+ csrxchg $zero, $a0, LOONGARCH_CSR_ECFG
+ jirl $zero, $ra, 0
+#/**
+# Disables global CPU interrupts.
+#**/
ASM_PFX(DisableInterrupts):
- li.w $t0, 0x4
- csrxchg $zero, $t0, 0x0
+ li.w $t0, BIT2
+ csrxchg $zero, $t0, LOONGARCH_CSR_CRMD
jirl $zero, $ra, 0
.end
diff --git a/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S b/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
index 3c34fb2cdd..73adcd7b0c 100644
--- a/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
+++ b/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
@@ -1,21 +1,33 @@
#------------------------------------------------------------------------------
#
-# LoongArch interrupt enable
+# LoongArch interrupt enable operations
#
-# Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
#------------------------------------------------------------------------------
+#include <Base.h>
+#include <Register/LoongArch64/Csr.h>
+
+ASM_GLOBAL ASM_PFX(EnableLocalInterrupts)
ASM_GLOBAL ASM_PFX(EnableInterrupts)
#/**
-# Enables CPU interrupts.
+# Enables local CPU interrupts.
+#
+# @param Needs to enable local interrupt bit.
#**/
+ASM_PFX(EnableLocalInterrupts):
+ csrxchg $a0, $a0, LOONGARCH_CSR_ECFG
+ jirl $zero, $ra, 0
+#/**
+# Enables global CPU interrupts.
+#**/
ASM_PFX(EnableInterrupts):
- li.w $t0, 0x4
- csrxchg $t0, $t0, 0x0
+ li.w $t0, BIT2
+ csrxchg $t0, $t0, LOONGARCH_CSR_CRMD
jirl $zero, $ra, 0
.end
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110708): https://edk2.groups.io/g/devel/message/110708
Mute This Topic: https://groups.io/mt/102413849/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local interrupt function set into BaseLib
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local interrupt " Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: devel@edk2.groups.io, lichao@loongson.cn
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chao Li
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local
> interrupt function set into BaseLib
>
> Adding LoongArch local interrupt function set, which is used to
> control
> the opening or closing of the local interrupt when the global
> interrupt
> is enabled.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 20 +++++++++++++++++
> .../BaseLib/LoongArch64/DisableInterrupts.S | 22 ++++++++++++++----
> -
> .../BaseLib/LoongArch64/EnableInterrupts.S | 22 ++++++++++++++----
> -
> 3 files changed, 54 insertions(+), 10 deletions(-)
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index a9a69c734c..93a014cd49 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -249,6 +249,26 @@ SetTlbRebaseAddress (
> IN UINT64
> );
>
> +/**
> + Enables local CPU interrupts.
> +
> + @param Needs to enable local interrupt bit.
> +**/
> +VOID
> +EnableLocalInterrupts (
> + IN UINT16
> + );
> +
> +/**
> + Disables local CPU interrupts.
> +
> + @param Needs to disable local interrupt bit.
> +**/
> +VOID
> +DisableLocalInterrupts (
> + IN UINT16
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
> b/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
> index 0f228339af..5de10e9e7a 100644
> --- a/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
> +++ b/MdePkg/Library/BaseLib/LoongArch64/DisableInterrupts.S
> @@ -1,21 +1,33 @@
> #--------------------------------------------------------------------
> ----------
> #
> -# LoongArch interrupt disable
> +# LoongArch interrupt disable operations
> #
> -# Copyright (c) 2022, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> #--------------------------------------------------------------------
> ----------
>
> +#include <Base.h>
> +#include <Register/LoongArch64/Csr.h>
> +
> +ASM_GLOBAL ASM_PFX(DisableLocalInterrupts)
> ASM_GLOBAL ASM_PFX(DisableInterrupts)
>
> #/**
> -# Disables CPU interrupts.
> +# Disables local CPU interrupts.
> +#
> +# @param Needs to disable local interrupt bit.
> #**/
> +ASM_PFX(DisableLocalInterrupts):
> + csrxchg $zero, $a0, LOONGARCH_CSR_ECFG
> + jirl $zero, $ra, 0
>
> +#/**
> +# Disables global CPU interrupts.
> +#**/
> ASM_PFX(DisableInterrupts):
> - li.w $t0, 0x4
> - csrxchg $zero, $t0, 0x0
> + li.w $t0, BIT2
> + csrxchg $zero, $t0, LOONGARCH_CSR_CRMD
> jirl $zero, $ra, 0
> .end
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
> b/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
> index 3c34fb2cdd..73adcd7b0c 100644
> --- a/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
> +++ b/MdePkg/Library/BaseLib/LoongArch64/EnableInterrupts.S
> @@ -1,21 +1,33 @@
> #--------------------------------------------------------------------
> ----------
> #
> -# LoongArch interrupt enable
> +# LoongArch interrupt enable operations
> #
> -# Copyright (c) 2022, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> #--------------------------------------------------------------------
> ----------
>
> +#include <Base.h>
> +#include <Register/LoongArch64/Csr.h>
> +
> +ASM_GLOBAL ASM_PFX(EnableLocalInterrupts)
> ASM_GLOBAL ASM_PFX(EnableInterrupts)
>
> #/**
> -# Enables CPU interrupts.
> +# Enables local CPU interrupts.
> +#
> +# @param Needs to enable local interrupt bit.
> #**/
> +ASM_PFX(EnableLocalInterrupts):
> + csrxchg $a0, $a0, LOONGARCH_CSR_ECFG
> + jirl $zero, $ra, 0
>
> +#/**
> +# Enables global CPU interrupts.
> +#**/
> ASM_PFX(EnableInterrupts):
> - li.w $t0, 0x4
> - csrxchg $t0, $t0, 0x0
> + li.w $t0, BIT2
> + csrxchg $t0, $t0, LOONGARCH_CSR_CRMD
> jirl $zero, $ra, 0
> .end
> --
> 2.27.0
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110789): https://edk2.groups.io/g/devel/message/110789
Mute This Topic: https://groups.io/mt/102413849/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (3 preceding siblings ...)
2023-11-06 3:26 ` [edk2-devel] [PATCH v2 04/30] MdePkg: Add LoongArch64 local interrupt " Chao Li
@ 2023-11-06 3:27 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 06/30] MdePkg: Add read stable counter operation for LoongArch Chao Li
` (27 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:27 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Add LoongArch AsmCpucfg function and Cpucfg definitions.
Also added Include/Register/LoongArch64/Cpucfg.h to IgnoreFiles of
EccCheck.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 12 +
MdePkg/Include/Register/LoongArch64/Cpucfg.h | 565 +++++++++++++++++++
MdePkg/Library/BaseLib/BaseLib.inf | 1 +
MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S | 26 +
MdePkg/MdePkg.ci.yaml | 3 +-
5 files changed, 606 insertions(+), 1 deletion(-)
create mode 100644 MdePkg/Include/Register/LoongArch64/Cpucfg.h
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index 93a014cd49..3adf4d0042 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -269,6 +269,18 @@ DisableLocalInterrupts (
IN UINT16
);
+/**
+ Read CPUCFG register.
+
+ @param Index Specifies the register number of the CPUCFG to read the data.
+ @param Data A pointer to the variable used to store the CPUCFG register value.
+**/
+VOID
+AsmCpucfg (
+ IN UINT32 Index,
+ OUT UINT32 *Data
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Include/Register/LoongArch64/Cpucfg.h b/MdePkg/Include/Register/LoongArch64/Cpucfg.h
new file mode 100644
index 0000000000..841885dc70
--- /dev/null
+++ b/MdePkg/Include/Register/LoongArch64/Cpucfg.h
@@ -0,0 +1,565 @@
+/** @file
+ CPUCFG definitions.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef CPUCFG_H_
+#define CPUCFG_H_
+
+/**
+ CPUCFG REG0 Information
+
+ @code
+ CPUCFG_REG0_INFO_DATA
+ **/
+#define CPUCFG_REG0_INFO 0x0
+
+/**
+ CPUCFG REG0 Information returned data.
+ #CPUCFG_REG0_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 31:0] Processor Identity.
+ ///
+ UINT32 PRID : 32;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG0_INFO_DATA;
+
+/**
+ CPUCFG REG1 Information
+
+ @code
+ CPUCFG_REG1_INFO_DATA
+ **/
+#define CPUCFG_REG1_INFO 0x1
+
+/**
+ CPUCFG REG1 Information returned data.
+ #CPUCFG_REG1_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 1:0] Architecture:
+ /// 2'b00 indicates the implementation of simplified LoongAarch32;
+ /// 2'b01 indicates the implementation of LoongAarch32;
+ /// 2'b10 indicates the implementation of LoongAarch64;
+ /// 2'b11 reserved;
+ ///
+ UINT32 ARCH : 2;
+ ///
+ /// [Bit 2] Paging mapping mode. A value of 1 indicates the processor MMU supports
+ /// page mapping mode.
+ ///
+ UINT32 PGMMU : 1;
+ ///
+ /// [Bit 3] A value of 1 indicates the processor supports the IOCSR instruction.
+ ///
+ UINT32 IOCSR : 1;
+ ///
+ /// [Bit 11:4] Physical address bits. The supported physical address bits PALEN value
+ /// minus 1.
+ ///
+ UINT32 PALEN : 8;
+ ///
+ /// [Bit 19:12] Virtual address bits. The supported virtual address bits VALEN value
+ /// minus 1.
+ ///
+ UINT32 VALEN : 8;
+ ///
+ /// [Bit 20] Non-aligned Memory Access. A value of 1 indicates the processor supports
+ /// non-aligned memory access.
+ ///
+ UINT32 UAL : 1;
+ ///
+ /// [Bit 21] Page Read Inhibit. A value of 1 indicates the processor supports page
+ /// attribute of "Read Inhibit".
+ ///
+ UINT32 RI : 1;
+ ///
+ /// [Bit 22] Page Execution Protection. A value of 1 indicates the processor supports
+ /// page attribute of "Execution Protection".
+ ///
+ UINT32 EP : 1;
+ ///
+ /// [Bit 23] A value of 1 indicates the processor supports for page attributes of RPLV.
+ ///
+ UINT32 RPLV : 1;
+ ///
+ /// [Bit 24] Huge Page. A value of 1 indicates the processor supports page attribute
+ /// of huge page.
+ ///
+ UINT32 HP : 1;
+ ///
+ /// [Bit 25] A value of 1 indicates that the string of processor product information
+ /// is recorded at address 0 of the IOCSR access space.
+ ///
+ UINT32 IOCSR_BRD : 1;
+ ///
+ /// [Bit 26] A value of 1 indicates that the external interrupt uses the message
+ /// interrupt mode, otherwise it is the level interrupt line mode.
+ ///
+ UINT32 MSG_INT : 1;
+ ///
+ /// [Bit 31:27] Reserved.
+ ///
+ UINT32 Reserved : 5;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG1_INFO_DATA;
+
+/**
+ CPUCFG REG2 Information
+
+ @code
+ CPUCFG_REG2_INFO_DATA
+ **/
+#define CPUCFG_REG2_INFO 0x2
+
+/**
+ CPUCFG REG2 Information returned data.
+ #CPUCFG_REG2_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 0] Basic Floating-Point. A value of 1 indicates the processor supports basic
+ /// floating-point instructions.
+ ///
+ UINT32 FP : 1;
+ ///
+ /// [Bit 1] Sigle-Precision. A value of 1 indicates the processor supports sigle-precision
+ /// floating-point numbers.
+ ///
+ UINT32 FP_SP : 1;
+ ///
+ /// [Bit 2] Double-Precision. A value of 1 indicates the processor supports double-precision
+ /// floating-point numbers.
+ ///
+ UINT32 FP_DP : 1;
+ ///
+ /// [Bit 5:3] The version number of the floating-point arithmetic standard. 1 is the initial
+ /// version number, indicating that it is compatible with the IEEE 754-2008 standard.
+ ///
+ UINT32 FP_ver : 3;
+ ///
+ /// [Bit 6] 128-bit Vector Extension. A value of 1 indicates the processor supports 128-bit
+ /// vector extension.
+ ///
+ UINT32 LSX : 1;
+ ///
+ /// [Bit 7] 256-bit Vector Extension. A value of 1 indicates the processor supports 256-bit
+ /// vector extension.
+ ///
+ UINT32 LASX : 1;
+ ///
+ /// [Bit 8] Complex Vector Operation Instructions. A value of 1 indicates the processor supports
+ /// complex vector operation instructions.
+ ///
+ UINT32 COMPLEX : 1;
+ ///
+ /// [Bit 9] Encryption And Decryption Vector Instructions. A value of 1 indicates the processor
+ /// supports encryption and decryption vector instructions.
+ ///
+ UINT32 CRYPTO : 1;
+ ///
+ /// [Bit 10] Virtualization Expansion. A value of 1 indicates the processor supports
+ /// virtualization expansion.
+ ///
+ UINT32 LVZ : 1;
+ ///
+ /// [Bit 13:11] The version number of the virtualization hardware acceleration specification.
+ /// 1 is the initial version number.
+ ///
+ UINT32 LVZ_ver : 3;
+ ///
+ /// [Bit 14] Constant Frequency Counter And Timer. A value of 1 indicates the processor supports
+ /// constant frequency counter and timer.
+ ///
+ UINT32 LLFTP : 1;
+ ///
+ /// [Bit 17:15] Constant frequency counter and timer version number. 1 is the initial version.
+ ///
+ UINT32 LLTP_ver : 3;
+ ///
+ /// [Bit 18] X86 Binary Translation Extension. A value of 1 indicates the processor supports
+ /// X86 binary translation extension.
+ ///
+ UINT32 LBT_X86 : 1;
+ ///
+ /// [Bit 19] ARM Binary Translation Extension. A value of 1 indicates the processor supports
+ /// ARM binary translation extension.
+ ///
+ UINT32 LBT_ARM : 1;
+ ///
+ /// [Bit 20] MIPS Binary Translation Extension. A value of 1 indicates the processor supports
+ /// MIPS binary translation extension.
+ ///
+ UINT32 LBT_MIPS : 1;
+ ///
+ /// [Bit 21] Software Page Table Walking Instruction. A value of 1 indicates the processor
+ /// supports software page table walking instruction.
+ ///
+ UINT32 LSPW : 1;
+ ///
+ /// [Bit 22] Atomic Memory Access Instruction. A value of 1 indicates the processor supports
+ /// AM* atomic memory access instruction.
+ ///
+ UINT32 LAM : 1;
+ ///
+ /// [Bit 31:23] Reserved.
+ ///
+ UINT32 Reserved : 9;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG2_INFO_DATA;
+
+/**
+ CPUCFG REG3 Information
+
+ @code
+ CPUCFG_REG3_INFO_DATA
+ **/
+#define CPUCFG_REG3_INFO 0x3
+
+/**
+ CPUCFG REG3 Information returned data.
+ #CPUCFG_REG3_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 0] Hardware Cache Coherent DMA. A value of 1 indicates the processor supports
+ /// hardware cache coherent DMA.
+ ///
+ UINT32 CCDMA : 1;
+ ///
+ /// [Bit 1] Store Fill Buffer. A value of 1 indicates the processor supports store fill
+ /// buffer (SFB).
+ ///
+ UINT32 SFB : 1;
+ ///
+ /// [Bit 2] Uncache Accelerate. A value of 1 indicates the processor supports uncache
+ /// accelerate.
+ ///
+ UINT32 UCACC : 1;
+ ///
+ /// [Bit 3] A value of 1 indicates the processor supports LL instruction to fetch exclusive
+ /// block function.
+ ///
+ UINT32 LLEXC : 1;
+ ///
+ /// [Bit 4] A value of 1 indicates the processor supports random delay function after SC
+ /// instruction.
+ ///
+ UINT32 SCDLY : 1;
+ ///
+ /// [Bit 5] A value of 1 indicates the processor supports LL automatic with dbar function.
+ ///
+ UINT32 LLDBAR : 1;
+ ///
+ /// [Bit 6] A value of 1 indicates the processor supports the hardware maintains the
+ /// consistency between ITLB and TLB.
+ ///
+ UINT32 ITLBT : 1;
+ ///
+ /// [Bit 7] A value of 1 indicates the processor supports the hardware maintains the data
+ /// consistency between ICache and DCache in one processor core.
+ ///
+ UINT32 ICACHET : 1;
+ ///
+ /// [Bit 10:8] The maximum number of directory levels supported by the page walk instruction.
+ ///
+ UINT32 SPW_LVL : 3;
+ ///
+ /// [Bit 11] A value of 1 indicates the processor supports the page walk instruction fills
+ /// the TLB in half when it encounters a large page.
+ ///
+ UINT32 SPW_HP_HF : 1;
+ ///
+ /// [Bit 12] Virtual Address Range. A value of 1 indicates the processor supports the software
+ /// configuration can be used to shorten the virtual address range.
+ ///
+ UINT32 RVA : 1;
+ ///
+ /// [Bit 16:13] The maximum configurable virtual address is shortened by -1.
+ ///
+ UINT32 RVAMAX_1 : 4;
+ ///
+ /// [Bit 31:17] Reserved.
+ ///
+ UINT32 Reserved : 15;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG3_INFO_DATA;
+
+/**
+ CPUCFG REG4 Information
+
+ @code
+ CPUCFG_REG4_INFO_DATA
+ **/
+#define CPUCFG_REG4_INFO 0x4
+
+/**
+ CPUCFG REG4 Information returned data.
+ #CPUCFG_REG4_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 31:0] Constant frequency timer and the crystal frequency corresponding to the clock
+ /// used by the timer.
+ ///
+ UINT32 CC_FREQ : 32;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG4_INFO_DATA;
+
+/**
+ CPUCFG REG5 Information
+
+ @code
+ CPUCFG_REG5_INFO_DATA
+ **/
+#define CPUCFG_REG5_INFO 0x5
+
+/**
+ CPUCFG REG5 Information returned data.
+ #CPUCFG_REG5_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 15:0] Constant frequency timer and the corresponding multiplication factor of the
+ /// clock used by the timer.
+ ///
+ UINT32 CC_MUL : 16;
+ ///
+ /// [Bit 31:16] Constant frequency timer and the division coefficient corresponding to the
+ /// clock used by the timer
+ ///
+ UINT32 CC_DIV : 16;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG5_INFO_DATA;
+
+/**
+ CPUCFG REG6 Information
+
+ @code
+ CPUCFG_REG6_INFO_DATA
+ **/
+#define CPUCFG_REG6_INFO 0x6
+
+/**
+ CPUCFG REG6 Information returned data.
+ #CPUCFG_REG6_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 0] Performance Counter. A value of 1 indicates the processor supports performance
+ /// counter.
+ ///
+ UINT32 PMP : 1;
+ ///
+ /// [Bit 3:1] In the performance monitor, the architecture defines the version number of the
+ /// event, and 1 is the initial version
+ ///
+ UINT32 PMVER : 3;
+ ///
+ /// [Bit 7:4] Number of performance monitors minus 1.
+ ///
+ UINT32 PMNUM : 4;
+ ///
+ /// [Bit 13:8] Number of bits of a performance monitor minus 1.
+ ///
+ UINT32 PMBITS : 6;
+ ///
+ /// [Bit 14] A value of 1 indicates the processor supports reading performance counter in user mode.
+ ///
+ UINT32 UPM : 1;
+ ///
+ /// [Bit 31:15] Reserved.
+ ///
+ UINT32 Reserved : 17;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG6_INFO_DATA;
+
+/**
+ CPUCFG REG16 Information
+
+ @code
+ CPUCFG_REG16_INFO_DATA
+ **/
+#define CPUCFG_REG16_INFO 0x10
+
+/**
+ CPUCFG REG16 Information returned data.
+ #CPUCFG_REG16_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 0] A value of 1 indicates the processor has a first-level instruction cache
+ /// or a first-level unified cache
+ ///
+ UINT32 L1_IU_Present : 1;
+ ///
+ /// [Bit 1] A value of 1 indicates that the cache shown by L1 IU_Present is the
+ /// unified cache.
+ ///
+ UINT32 L1_IU_Unify : 1;
+ ///
+ /// [Bit 2] A value of 1 indicates the processor has a first-level data cache.
+ ///
+ UINT32 L1_D_Present : 1;
+ ///
+ /// [Bit 3] A value of 1 indicates the processor has a second-level instruction cache
+ /// or a second-level unified cache.
+ ///
+ UINT32 L2_IU_Present : 1;
+ ///
+ /// [Bit 4] A value of 1 indicates that the cache shown by L2 IU_Present is the
+ /// unified cache.
+ ///
+ UINT32 L2_IU_Unify : 1;
+ ///
+ /// [Bit 5] A value of 1 indicates that the cache shown by L2 IU_Present is private
+ /// to each core.
+ ///
+ UINT32 L2_IU_Private : 1;
+ ///
+ /// [Bit 6] A value of 1 indicates that the cache shown by L2 IU_Present has an inclusive
+ /// relationship to the lower levels (L1).
+ ///
+ UINT32 L2_IU_Inclusive : 1;
+ ///
+ /// [Bit 7] A value of 1 indicates the processor has a second-level data cache.
+ ///
+ UINT32 L2_D_Present : 1;
+ ///
+ /// [Bit 8] A value of 1 indicates that the second-level data cache is private to each core.
+ ///
+ UINT32 L2_D_Private : 1;
+ ///
+ /// [Bit 9] A value of 1 indicates that the second-level data cache has a containment
+ /// relationship to the lower level (L1).
+ ///
+ UINT32 L2_D_Inclusive : 1;
+ ///
+ /// [Bit 10] A value of 1 indicates the processor has a three-level instruction cache
+ /// or a second-level unified Cache.
+ ///
+ UINT32 L3_IU_Present : 1;
+ ///
+ /// [Bit 11] A value of 1 indicates that the cache shown by L3 IU_Present is the
+ /// unified cache.
+ ///
+ UINT32 L3_IU_Unify : 1;
+ ///
+ /// [Bit 12] A value of 1 indicates that the cache shown by L3 IU_Present is private
+ /// to each core.
+ ///
+ UINT32 L3_IU_Private : 1;
+ ///
+ /// [Bit 13] A value of 1 indicates that the cache shown by L3 IU_Present has an inclusive
+ /// relationship to the lower levels (L1 and L2).
+ ///
+ UINT32 L3_IU_Inclusive : 1;
+ ///
+ /// [Bit 14] A value of 1 indicates the processor has a three-level data cache.
+ ///
+ UINT32 L3_D_Present : 1;
+ ///
+ /// [Bit 15] A value of 1 indicates that the three-level data cache is private to each core.
+ ///
+ UINT32 L3_D_Private : 1;
+ ///
+ /// [Bit 16] A value of 1 indicates that the three-level data cache has a containment
+ /// relationship to the lower level (L1 and L2).
+ ///
+ UINT32 L3_D_Inclusive : 1;
+ ///
+ /// [Bit 31:17] Reserved.
+ ///
+ UINT32 Reserved : 15;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_REG16_INFO_DATA;
+
+/**
+ CPUCFG REG17, REG18, REG19 and REG20 Information
+
+ @code
+ CPUCFG_CACHE_INFO_DATA
+ **/
+#define CPUCFG_REG17_INFO 0x11 /// L1 unified cache.
+#define CPUCFG_REG18_INFO 0x12 /// L1 data cache.
+#define CPUCFG_REG19_INFO 0x13 /// L2 unified cache.
+#define CPUCFG_REG20_INFO 0x14 /// L3 unified cache.
+
+/**
+ CPUCFG CACHE Information returned data.
+ #CPUCFG_REG17_INFO
+ #CPUCFG_REG18_INFO
+ #CPUCFG_REG19_INFO
+ #CPUCFG_REG20_INFO
+ **/
+typedef union {
+ struct {
+ ///
+ /// [Bit 15:0] Number of channels minus 1.
+ ///
+ UINT32 Way_1 : 16;
+ ///
+ /// [Bit 23:16] Log2 (number of cache rows per channel).
+ ///
+ UINT32 Index_log2 : 8;
+ ///
+ /// [Bit 30:24] Log2 (cache row bytes).
+ ///
+ UINT32 Linesize_log2 : 7;
+ ///
+ /// [Bit 31] Reserved.
+ ///
+ UINT32 Reserved : 1;
+ } Bits;
+ ///
+ /// All bit fields as a 32-bit value
+ ///
+ UINT32 Uint32;
+} CPUCFG_CACHE_INFO_DATA;
+#endif
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index a18fe5efb4..a427aa9359 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -420,6 +420,7 @@
LoongArch64/SetJumpLongJump.S | GCC
LoongArch64/SwitchStack.S | GCC
LoongArch64/ExceptionBase.S | GCC
+ LoongArch64/Cpucfg.S | GCC
[Packages]
MdePkg/MdePkg.dec
diff --git a/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S b/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
new file mode 100644
index 0000000000..7ed49146b4
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+#
+# AsmCpucfg for LoongArch
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+ASM_GLOBAL ASM_PFX(AsmCpucfg)
+
+#/**
+# Read CPUCFG register.
+#
+# @param a0 Specifies the register number of the CPUCFG to read the data.
+# @param a1 Pointer to the variable used to store the CPUCFG register value.
+#
+#**/
+
+ASM_PFX(AsmCpucfg):
+ cpucfg $t0, $a0
+ stptr.d $t0, $a1, 0
+
+ jirl $zero, $ra, 0
+ .end
diff --git a/MdePkg/MdePkg.ci.yaml b/MdePkg/MdePkg.ci.yaml
index 1d3d8327b1..f2d81af080 100644
--- a/MdePkg/MdePkg.ci.yaml
+++ b/MdePkg/MdePkg.ci.yaml
@@ -80,7 +80,8 @@
"Include/Register/Amd/SmramSaveStateMap.h",
"Test/UnitTest/Library/DevicePathLib/TestDevicePathLib.c",
"Test/UnitTest/Library/DevicePathLib/TestDevicePathLib.h",
- "Test/UnitTest/Library/DevicePathLib/TestDevicePathStringConversions.c"
+ "Test/UnitTest/Library/DevicePathLib/TestDevicePathStringConversions.c",
+ "Include/Register/LoongArch64/Cpucfg.h"
]
},
## options defined ci/Plugin/CompilerPlugin
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110709): https://edk2.groups.io/g/devel/message/110709
Mute This Topic: https://groups.io/mt/102413851/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function
>
> Add LoongArch AsmCpucfg function and Cpucfg definitions.
>
> Also added Include/Register/LoongArch64/Cpucfg.h to IgnoreFiles of
> EccCheck.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 12 +
> MdePkg/Include/Register/LoongArch64/Cpucfg.h | 565
> +++++++++++++++++++
> MdePkg/Library/BaseLib/BaseLib.inf | 1 +
> MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S | 26 +
> MdePkg/MdePkg.ci.yaml | 3 +-
> 5 files changed, 606 insertions(+), 1 deletion(-)
> create mode 100644 MdePkg/Include/Register/LoongArch64/Cpucfg.h
> create mode 100644 MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index 93a014cd49..3adf4d0042 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -269,6 +269,18 @@ DisableLocalInterrupts (
> IN UINT16
> );
>
> +/**
> + Read CPUCFG register.
> +
> + @param Index Specifies the register number of the CPUCFG to read
> the data.
> + @param Data A pointer to the variable used to store the CPUCFG
> register value.
> +**/
> +VOID
> +AsmCpucfg (
> + IN UINT32 Index,
> + OUT UINT32 *Data
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Include/Register/LoongArch64/Cpucfg.h
> b/MdePkg/Include/Register/LoongArch64/Cpucfg.h
> new file mode 100644
> index 0000000000..841885dc70
> --- /dev/null
> +++ b/MdePkg/Include/Register/LoongArch64/Cpucfg.h
> @@ -0,0 +1,565 @@
> +/** @file
> + CPUCFG definitions.
> +
> + Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +#ifndef CPUCFG_H_
> +#define CPUCFG_H_
> +
> +/**
> + CPUCFG REG0 Information
> +
> + @code
> + CPUCFG_REG0_INFO_DATA
> + **/
> +#define CPUCFG_REG0_INFO 0x0
> +
> +/**
> + CPUCFG REG0 Information returned data.
> + #CPUCFG_REG0_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 31:0] Processor Identity.
> + ///
> + UINT32 PRID : 32;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG0_INFO_DATA;
> +
> +/**
> + CPUCFG REG1 Information
> +
> + @code
> + CPUCFG_REG1_INFO_DATA
> + **/
> +#define CPUCFG_REG1_INFO 0x1
> +
> +/**
> + CPUCFG REG1 Information returned data.
> + #CPUCFG_REG1_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 1:0] Architecture:
> + /// 2'b00 indicates the implementation of simplified
> LoongAarch32;
> + /// 2'b01 indicates the implementation of LoongAarch32;
> + /// 2'b10 indicates the implementation of LoongAarch64;
> + /// 2'b11 reserved;
> + ///
> + UINT32 ARCH : 2;
> + ///
> + /// [Bit 2] Paging mapping mode. A value of 1 indicates the
> processor MMU supports
> + /// page mapping mode.
> + ///
> + UINT32 PGMMU : 1;
> + ///
> + /// [Bit 3] A value of 1 indicates the processor supports the
> IOCSR instruction.
> + ///
> + UINT32 IOCSR : 1;
> + ///
> + /// [Bit 11:4] Physical address bits. The supported physical
> address bits PALEN value
> + /// minus 1.
> + ///
> + UINT32 PALEN : 8;
> + ///
> + /// [Bit 19:12] Virtual address bits. The supported virtual
> address bits VALEN value
> + /// minus 1.
> + ///
> + UINT32 VALEN : 8;
> + ///
> + /// [Bit 20] Non-aligned Memory Access. A value of 1 indicates
> the processor supports
> + /// non-aligned memory access.
> + ///
> + UINT32 UAL : 1;
> + ///
> + /// [Bit 21] Page Read Inhibit. A value of 1 indicates the
> processor supports page
> + /// attribute of "Read Inhibit".
> + ///
> + UINT32 RI : 1;
> + ///
> + /// [Bit 22] Page Execution Protection. A value of 1 indicates
> the processor supports
> + /// page attribute of "Execution Protection".
> + ///
> + UINT32 EP : 1;
> + ///
> + /// [Bit 23] A value of 1 indicates the processor supports for
> page attributes of RPLV.
> + ///
> + UINT32 RPLV : 1;
> + ///
> + /// [Bit 24] Huge Page. A value of 1 indicates the processor
> supports page attribute
> + /// of huge page.
> + ///
> + UINT32 HP : 1;
> + ///
> + /// [Bit 25] A value of 1 indicates that the string of processor
> product information
> + /// is recorded at address 0 of the IOCSR access space.
> + ///
> + UINT32 IOCSR_BRD : 1;
> + ///
> + /// [Bit 26] A value of 1 indicates that the external interrupt
> uses the message
> + /// interrupt mode, otherwise it is the level interrupt line
> mode.
> + ///
> + UINT32 MSG_INT : 1;
> + ///
> + /// [Bit 31:27] Reserved.
> + ///
> + UINT32 Reserved : 5;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG1_INFO_DATA;
> +
> +/**
> + CPUCFG REG2 Information
> +
> + @code
> + CPUCFG_REG2_INFO_DATA
> + **/
> +#define CPUCFG_REG2_INFO 0x2
> +
> +/**
> + CPUCFG REG2 Information returned data.
> + #CPUCFG_REG2_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 0] Basic Floating-Point. A value of 1 indicates the
> processor supports basic
> + /// floating-point instructions.
> + ///
> + UINT32 FP : 1;
> + ///
> + /// [Bit 1] Sigle-Precision. A value of 1 indicates the processor
> supports sigle-precision
> + /// floating-point numbers.
> + ///
> + UINT32 FP_SP : 1;
> + ///
> + /// [Bit 2] Double-Precision. A value of 1 indicates the
> processor supports double-precision
> + /// floating-point numbers.
> + ///
> + UINT32 FP_DP : 1;
> + ///
> + /// [Bit 5:3] The version number of the floating-point arithmetic
> standard. 1 is the initial
> + /// version number, indicating that it is compatible with the
> IEEE 754-2008 standard.
> + ///
> + UINT32 FP_ver : 3;
> + ///
> + /// [Bit 6] 128-bit Vector Extension. A value of 1 indicates the
> processor supports 128-bit
> + /// vector extension.
> + ///
> + UINT32 LSX : 1;
> + ///
> + /// [Bit 7] 256-bit Vector Extension. A value of 1 indicates the
> processor supports 256-bit
> + /// vector extension.
> + ///
> + UINT32 LASX : 1;
> + ///
> + /// [Bit 8] Complex Vector Operation Instructions. A value of 1
> indicates the processor supports
> + /// complex vector operation instructions.
> + ///
> + UINT32 COMPLEX : 1;
> + ///
> + /// [Bit 9] Encryption And Decryption Vector Instructions. A
> value of 1 indicates the processor
> + /// supports encryption and decryption vector instructions.
> + ///
> + UINT32 CRYPTO : 1;
> + ///
> + /// [Bit 10] Virtualization Expansion. A value of 1 indicates the
> processor supports
> + /// virtualization expansion.
> + ///
> + UINT32 LVZ : 1;
> + ///
> + /// [Bit 13:11] The version number of the virtualization hardware
> acceleration specification.
> + /// 1 is the initial version number.
> + ///
> + UINT32 LVZ_ver : 3;
> + ///
> + /// [Bit 14] Constant Frequency Counter And Timer. A value of 1
> indicates the processor supports
> + /// constant frequency counter and timer.
> + ///
> + UINT32 LLFTP : 1;
> + ///
> + /// [Bit 17:15] Constant frequency counter and timer version
> number. 1 is the initial version.
> + ///
> + UINT32 LLTP_ver : 3;
> + ///
> + /// [Bit 18] X86 Binary Translation Extension. A value of 1
> indicates the processor supports
> + /// X86 binary translation extension.
> + ///
> + UINT32 LBT_X86 : 1;
> + ///
> + /// [Bit 19] ARM Binary Translation Extension. A value of 1
> indicates the processor supports
> + /// ARM binary translation extension.
> + ///
> + UINT32 LBT_ARM : 1;
> + ///
> + /// [Bit 20] MIPS Binary Translation Extension. A value of 1
> indicates the processor supports
> + /// MIPS binary translation extension.
> + ///
> + UINT32 LBT_MIPS : 1;
> + ///
> + /// [Bit 21] Software Page Table Walking Instruction. A value of
> 1 indicates the processor
> + /// supports software page table walking instruction.
> + ///
> + UINT32 LSPW : 1;
> + ///
> + /// [Bit 22] Atomic Memory Access Instruction. A value of 1
> indicates the processor supports
> + /// AM* atomic memory access instruction.
> + ///
> + UINT32 LAM : 1;
> + ///
> + /// [Bit 31:23] Reserved.
> + ///
> + UINT32 Reserved : 9;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG2_INFO_DATA;
> +
> +/**
> + CPUCFG REG3 Information
> +
> + @code
> + CPUCFG_REG3_INFO_DATA
> + **/
> +#define CPUCFG_REG3_INFO 0x3
> +
> +/**
> + CPUCFG REG3 Information returned data.
> + #CPUCFG_REG3_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 0] Hardware Cache Coherent DMA. A value of 1 indicates
> the processor supports
> + /// hardware cache coherent DMA.
> + ///
> + UINT32 CCDMA : 1;
> + ///
> + /// [Bit 1] Store Fill Buffer. A value of 1 indicates the
> processor supports store fill
> + /// buffer (SFB).
> + ///
> + UINT32 SFB : 1;
> + ///
> + /// [Bit 2] Uncache Accelerate. A value of 1 indicates the
> processor supports uncache
> + /// accelerate.
> + ///
> + UINT32 UCACC : 1;
> + ///
> + /// [Bit 3] A value of 1 indicates the processor supports LL
> instruction to fetch exclusive
> + /// block function.
> + ///
> + UINT32 LLEXC : 1;
> + ///
> + /// [Bit 4] A value of 1 indicates the processor supports random
> delay function after SC
> + /// instruction.
> + ///
> + UINT32 SCDLY : 1;
> + ///
> + /// [Bit 5] A value of 1 indicates the processor supports LL
> automatic with dbar function.
> + ///
> + UINT32 LLDBAR : 1;
> + ///
> + /// [Bit 6] A value of 1 indicates the processor supports the
> hardware maintains the
> + /// consistency between ITLB and TLB.
> + ///
> + UINT32 ITLBT : 1;
> + ///
> + /// [Bit 7] A value of 1 indicates the processor supports the
> hardware maintains the data
> + /// consistency between ICache and DCache in one processor core.
> + ///
> + UINT32 ICACHET : 1;
> + ///
> + /// [Bit 10:8] The maximum number of directory levels supported
> by the page walk instruction.
> + ///
> + UINT32 SPW_LVL : 3;
> + ///
> + /// [Bit 11] A value of 1 indicates the processor supports the
> page walk instruction fills
> + /// the TLB in half when it encounters a large page.
> + ///
> + UINT32 SPW_HP_HF : 1;
> + ///
> + /// [Bit 12] Virtual Address Range. A value of 1 indicates the
> processor supports the software
> + /// configuration can be used to shorten the virtual address
> range.
> + ///
> + UINT32 RVA : 1;
> + ///
> + /// [Bit 16:13] The maximum configurable virtual address is
> shortened by -1.
> + ///
> + UINT32 RVAMAX_1 : 4;
> + ///
> + /// [Bit 31:17] Reserved.
> + ///
> + UINT32 Reserved : 15;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG3_INFO_DATA;
> +
> +/**
> + CPUCFG REG4 Information
> +
> + @code
> + CPUCFG_REG4_INFO_DATA
> + **/
> +#define CPUCFG_REG4_INFO 0x4
> +
> +/**
> + CPUCFG REG4 Information returned data.
> + #CPUCFG_REG4_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 31:0] Constant frequency timer and the crystal frequency
> corresponding to the clock
> + /// used by the timer.
> + ///
> + UINT32 CC_FREQ : 32;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG4_INFO_DATA;
> +
> +/**
> + CPUCFG REG5 Information
> +
> + @code
> + CPUCFG_REG5_INFO_DATA
> + **/
> +#define CPUCFG_REG5_INFO 0x5
> +
> +/**
> + CPUCFG REG5 Information returned data.
> + #CPUCFG_REG5_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 15:0] Constant frequency timer and the corresponding
> multiplication factor of the
> + /// clock used by the timer.
> + ///
> + UINT32 CC_MUL : 16;
> + ///
> + /// [Bit 31:16] Constant frequency timer and the division
> coefficient corresponding to the
> + /// clock used by the timer
> + ///
> + UINT32 CC_DIV : 16;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG5_INFO_DATA;
> +
> +/**
> + CPUCFG REG6 Information
> +
> + @code
> + CPUCFG_REG6_INFO_DATA
> + **/
> +#define CPUCFG_REG6_INFO 0x6
> +
> +/**
> + CPUCFG REG6 Information returned data.
> + #CPUCFG_REG6_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 0] Performance Counter. A value of 1 indicates the
> processor supports performance
> + /// counter.
> + ///
> + UINT32 PMP : 1;
> + ///
> + /// [Bit 3:1] In the performance monitor, the architecture
> defines the version number of the
> + /// event, and 1 is the initial version
> + ///
> + UINT32 PMVER : 3;
> + ///
> + /// [Bit 7:4] Number of performance monitors minus 1.
> + ///
> + UINT32 PMNUM : 4;
> + ///
> + /// [Bit 13:8] Number of bits of a performance monitor minus 1.
> + ///
> + UINT32 PMBITS : 6;
> + ///
> + /// [Bit 14] A value of 1 indicates the processor supports
> reading performance counter in user mode.
> + ///
> + UINT32 UPM : 1;
> + ///
> + /// [Bit 31:15] Reserved.
> + ///
> + UINT32 Reserved : 17;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG6_INFO_DATA;
> +
> +/**
> + CPUCFG REG16 Information
> +
> + @code
> + CPUCFG_REG16_INFO_DATA
> + **/
> +#define CPUCFG_REG16_INFO 0x10
> +
> +/**
> + CPUCFG REG16 Information returned data.
> + #CPUCFG_REG16_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 0] A value of 1 indicates the processor has a first-
> level instruction cache
> + /// or a first-level unified cache
> + ///
> + UINT32 L1_IU_Present : 1;
> + ///
> + /// [Bit 1] A value of 1 indicates that the cache shown by L1
> IU_Present is the
> + /// unified cache.
> + ///
> + UINT32 L1_IU_Unify : 1;
> + ///
> + /// [Bit 2] A value of 1 indicates the processor has a first-
> level data cache.
> + ///
> + UINT32 L1_D_Present : 1;
> + ///
> + /// [Bit 3] A value of 1 indicates the processor has a second-
> level instruction cache
> + /// or a second-level unified cache.
> + ///
> + UINT32 L2_IU_Present : 1;
> + ///
> + /// [Bit 4] A value of 1 indicates that the cache shown by L2
> IU_Present is the
> + /// unified cache.
> + ///
> + UINT32 L2_IU_Unify : 1;
> + ///
> + /// [Bit 5] A value of 1 indicates that the cache shown by L2
> IU_Present is private
> + /// to each core.
> + ///
> + UINT32 L2_IU_Private : 1;
> + ///
> + /// [Bit 6] A value of 1 indicates that the cache shown by L2
> IU_Present has an inclusive
> + /// relationship to the lower levels (L1).
> + ///
> + UINT32 L2_IU_Inclusive : 1;
> + ///
> + /// [Bit 7] A value of 1 indicates the processor has a second-
> level data cache.
> + ///
> + UINT32 L2_D_Present : 1;
> + ///
> + /// [Bit 8] A value of 1 indicates that the second-level data
> cache is private to each core.
> + ///
> + UINT32 L2_D_Private : 1;
> + ///
> + /// [Bit 9] A value of 1 indicates that the second-level data
> cache has a containment
> + /// relationship to the lower level (L1).
> + ///
> + UINT32 L2_D_Inclusive : 1;
> + ///
> + /// [Bit 10] A value of 1 indicates the processor has a three-
> level instruction cache
> + /// or a second-level unified Cache.
> + ///
> + UINT32 L3_IU_Present : 1;
> + ///
> + /// [Bit 11] A value of 1 indicates that the cache shown by L3
> IU_Present is the
> + /// unified cache.
> + ///
> + UINT32 L3_IU_Unify : 1;
> + ///
> + /// [Bit 12] A value of 1 indicates that the cache shown by L3
> IU_Present is private
> + /// to each core.
> + ///
> + UINT32 L3_IU_Private : 1;
> + ///
> + /// [Bit 13] A value of 1 indicates that the cache shown by L3
> IU_Present has an inclusive
> + /// relationship to the lower levels (L1 and L2).
> + ///
> + UINT32 L3_IU_Inclusive : 1;
> + ///
> + /// [Bit 14] A value of 1 indicates the processor has a three-
> level data cache.
> + ///
> + UINT32 L3_D_Present : 1;
> + ///
> + /// [Bit 15] A value of 1 indicates that the three-level data
> cache is private to each core.
> + ///
> + UINT32 L3_D_Private : 1;
> + ///
> + /// [Bit 16] A value of 1 indicates that the three-level data
> cache has a containment
> + /// relationship to the lower level (L1 and L2).
> + ///
> + UINT32 L3_D_Inclusive : 1;
> + ///
> + /// [Bit 31:17] Reserved.
> + ///
> + UINT32 Reserved : 15;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_REG16_INFO_DATA;
> +
> +/**
> + CPUCFG REG17, REG18, REG19 and REG20 Information
> +
> + @code
> + CPUCFG_CACHE_INFO_DATA
> + **/
> +#define CPUCFG_REG17_INFO 0x11 /// L1 unified cache.
> +#define CPUCFG_REG18_INFO 0x12 /// L1 data cache.
> +#define CPUCFG_REG19_INFO 0x13 /// L2 unified cache.
> +#define CPUCFG_REG20_INFO 0x14 /// L3 unified cache.
> +
> +/**
> + CPUCFG CACHE Information returned data.
> + #CPUCFG_REG17_INFO
> + #CPUCFG_REG18_INFO
> + #CPUCFG_REG19_INFO
> + #CPUCFG_REG20_INFO
> + **/
> +typedef union {
> + struct {
> + ///
> + /// [Bit 15:0] Number of channels minus 1.
> + ///
> + UINT32 Way_1 : 16;
> + ///
> + /// [Bit 23:16] Log2 (number of cache rows per channel).
> + ///
> + UINT32 Index_log2 : 8;
> + ///
> + /// [Bit 30:24] Log2 (cache row bytes).
> + ///
> + UINT32 Linesize_log2 : 7;
> + ///
> + /// [Bit 31] Reserved.
> + ///
> + UINT32 Reserved : 1;
> + } Bits;
> + ///
> + /// All bit fields as a 32-bit value
> + ///
> + UINT32 Uint32;
> +} CPUCFG_CACHE_INFO_DATA;
> +#endif
> diff --git a/MdePkg/Library/BaseLib/BaseLib.inf
> b/MdePkg/Library/BaseLib/BaseLib.inf
> index a18fe5efb4..a427aa9359 100644
> --- a/MdePkg/Library/BaseLib/BaseLib.inf
> +++ b/MdePkg/Library/BaseLib/BaseLib.inf
> @@ -420,6 +420,7 @@
> LoongArch64/SetJumpLongJump.S | GCC
> LoongArch64/SwitchStack.S | GCC
> LoongArch64/ExceptionBase.S | GCC
> + LoongArch64/Cpucfg.S | GCC
>
> [Packages]
> MdePkg/MdePkg.dec
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
> b/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
> new file mode 100644
> index 0000000000..7ed49146b4
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/Cpucfg.S
> @@ -0,0 +1,26 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# AsmCpucfg for LoongArch
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +
> +ASM_GLOBAL ASM_PFX(AsmCpucfg)
> +
> +#/**
> +# Read CPUCFG register.
> +#
> +# @param a0 Specifies the register number of the CPUCFG to read
> the data.
> +# @param a1 Pointer to the variable used to store the CPUCFG
> register value.
> +#
> +#**/
> +
> +ASM_PFX(AsmCpucfg):
> + cpucfg $t0, $a0
> + stptr.d $t0, $a1, 0
> +
> + jirl $zero, $ra, 0
> + .end
> diff --git a/MdePkg/MdePkg.ci.yaml b/MdePkg/MdePkg.ci.yaml
> index 1d3d8327b1..f2d81af080 100644
> --- a/MdePkg/MdePkg.ci.yaml
> +++ b/MdePkg/MdePkg.ci.yaml
> @@ -80,7 +80,8 @@
> "Include/Register/Amd/SmramSaveStateMap.h",
>
> "Test/UnitTest/Library/DevicePathLib/TestDevicePathLib.c",
>
> "Test/UnitTest/Library/DevicePathLib/TestDevicePathLib.h",
> -
> "Test/UnitTest/Library/DevicePathLib/TestDevicePathStringConversions.c
> "
> +
> "Test/UnitTest/Library/DevicePathLib/TestDevicePathStringConversions.c
> ",
> + "Include/Register/LoongArch64/Cpucfg.h"
> ]
> },
> ## options defined ci/Plugin/CompilerPlugin
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110791): https://edk2.groups.io/g/devel/message/110791
Mute This Topic: https://groups.io/mt/102413851/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 06/30] MdePkg: Add read stable counter operation for LoongArch
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (4 preceding siblings ...)
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 05/30] MdePkg: Add LoongArch Cpucfg function Chao Li
@ 2023-11-06 3:27 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR " Chao Li
` (26 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:27 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Add LoongArch gets stable counter ASM function.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 12 ++++++++++
MdePkg/Library/BaseLib/BaseLib.inf | 1 +
.../BaseLib/LoongArch64/ReadStableCounter.S | 24 +++++++++++++++++++
3 files changed, 37 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index 3adf4d0042..55d53c75a0 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -281,6 +281,18 @@ AsmCpucfg (
OUT UINT32 *Data
);
+/**
+ Gets the timer count value.
+
+ @param[] VOID
+ @retval timer count value.
+
+**/
+UINTN
+AsmReadStableCounter (
+ VOID
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index a427aa9359..aaf221822b 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -421,6 +421,7 @@
LoongArch64/SwitchStack.S | GCC
LoongArch64/ExceptionBase.S | GCC
LoongArch64/Cpucfg.S | GCC
+ LoongArch64/ReadStableCounter.S | GCC
[Packages]
MdePkg/MdePkg.dec
diff --git a/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S b/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
new file mode 100644
index 0000000000..59c877211d
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
@@ -0,0 +1,24 @@
+#------------------------------------------------------------------------------
+#
+# LoongArch Read Stable Counter
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+ASM_GLOBAL ASM_PFX(AsmReadStableCounter)
+
+#/**
+# Gets the timer count value.
+#
+# @param[] VOID
+# @retval timer count value.
+#
+#**/
+
+ASM_PFX(AsmReadStableCounter):
+ rdtime.d $a0, $zero
+ jirl $zero, $ra, 0
+ .end
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110710): https://edk2.groups.io/g/devel/message/110710
Mute This Topic: https://groups.io/mt/102413854/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 06/30] MdePkg: Add read stable counter operation for LoongArch
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 06/30] MdePkg: Add read stable counter operation for LoongArch Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [PATCH v2 06/30] MdePkg: Add read stable counter operation
> for LoongArch
>
> Add LoongArch gets stable counter ASM function.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 12 ++++++++++
> MdePkg/Library/BaseLib/BaseLib.inf | 1 +
> .../BaseLib/LoongArch64/ReadStableCounter.S | 24
> +++++++++++++++++++
> 3 files changed, 37 insertions(+)
> create mode 100644
> MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index 3adf4d0042..55d53c75a0 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -281,6 +281,18 @@ AsmCpucfg (
> OUT UINT32 *Data
> );
>
> +/**
> + Gets the timer count value.
> +
> + @param[] VOID
> + @retval timer count value.
> +
> +**/
> +UINTN
> +AsmReadStableCounter (
> + VOID
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Library/BaseLib/BaseLib.inf
> b/MdePkg/Library/BaseLib/BaseLib.inf
> index a427aa9359..aaf221822b 100644
> --- a/MdePkg/Library/BaseLib/BaseLib.inf
> +++ b/MdePkg/Library/BaseLib/BaseLib.inf
> @@ -421,6 +421,7 @@
> LoongArch64/SwitchStack.S | GCC
> LoongArch64/ExceptionBase.S | GCC
> LoongArch64/Cpucfg.S | GCC
> + LoongArch64/ReadStableCounter.S | GCC
>
> [Packages]
> MdePkg/MdePkg.dec
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
> b/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
> new file mode 100644
> index 0000000000..59c877211d
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/ReadStableCounter.S
> @@ -0,0 +1,24 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# LoongArch Read Stable Counter
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +
> +ASM_GLOBAL ASM_PFX(AsmReadStableCounter)
> +
> +#/**
> +# Gets the timer count value.
> +#
> +# @param[] VOID
> +# @retval timer count value.
> +#
> +#**/
> +
> +ASM_PFX(AsmReadStableCounter):
> + rdtime.d $a0, $zero
> + jirl $zero, $ra, 0
> + .end
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110792): https://edk2.groups.io/g/devel/message/110792
Mute This Topic: https://groups.io/mt/102413854/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR operation for LoongArch
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (5 preceding siblings ...)
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 06/30] MdePkg: Add read stable counter operation for LoongArch Chao Li
@ 2023-11-06 3:27 ` Chao Li
2023-11-07 3:31 ` Michael D Kinney
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 08/30] MdePkg: Add IOCSR " Chao Li
` (25 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:27 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu, Bibo Mao
Add CsrRead, CsrWrite and CsrXChg functions for LoongArch, and use them
to operate the CSR register of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 45 +++
MdePkg/Library/BaseLib/BaseLib.inf | 2 +
MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S | 422 ++++++++++++++++++++
MdePkg/Library/BaseLib/LoongArch64/Csr.c | 81 ++++
4 files changed, 550 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/Csr.c
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index 55d53c75a0..234f3065c2 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -293,6 +293,51 @@ AsmReadStableCounter (
VOID
);
+/**
+ CSR read operation.
+
+ @param[in] Select CSR read instruction select values.
+
+ @return The return value of csrrd instruction, return -1 means no CSR instruction
+ is found.
+**/
+UINTN
+CsrRead (
+ IN UINT16 Select
+ );
+
+/**
+ CSR write operation.
+
+ @param[in] Select CSR write instruction select values.
+ @param[in] Value The csrwr will write the value.
+
+ @return The return value of csrwr instruction, that is, store the old value of
+ the register, return -1 means no CSR instruction is found.
+**/
+UINTN
+CsrWrite (
+ IN UINT16 Select,
+ IN UINTN Value
+ );
+
+/**
+ CSR exchange operation.
+
+ @param[in] Select CSR exchange instruction select values.
+ @param[in] Value The csrxchg will write the value.
+ @param[in] Mask The csrxchg mask value.
+
+ @return The return value of csrxchg instruction, that is, store the old value of
+ the register, return -1 means no CSR instruction is found.
+**/
+UINTN
+CsrXChg (
+ IN UINT16 Select,
+ IN UINTN Value,
+ IN UINTN Mask
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index aaf221822b..74a323c798 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -409,7 +409,9 @@
[Sources.LOONGARCH64]
Math64.c
Unaligned.c
+ LoongArch64/Csr.c
LoongArch64/InternalSwitchStack.c
+ LoongArch64/AsmCsr.S | GCC
LoongArch64/GetInterruptState.S | GCC
LoongArch64/EnableInterrupts.S | GCC
LoongArch64/DisableInterrupts.S | GCC
diff --git a/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S b/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
new file mode 100644
index 0000000000..25dd060ede
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
@@ -0,0 +1,422 @@
+#------------------------------------------------------------------------------
+#
+# LoongArch ASM CSR operation functions
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+#include <Register/LoongArch64/Csr.h>
+
+ASM_GLOBAL ASM_PFX (AsmCsrRead)
+ASM_GLOBAL ASM_PFX (AsmCsrWrite)
+ASM_GLOBAL ASM_PFX (AsmCsrXChg)
+
+.macro AsmCsrRd Sel
+ csrrd $a0, \Sel
+ jirl $zero, $ra, 0
+.endm
+
+.macro AsmCsrWr Sel
+ csrwr $a0, \Sel
+ jirl $zero, $ra, 0
+.endm
+
+.macro AsmCsrXChange Sel
+ csrxchg $a0, $a1, \Sel
+ jirl $zero, $ra, 0
+.endm
+
+ASM_PFX(AsmCsrRead):
+ blt $a0, $zero, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_EBASE
+ bltu $t0, $a0, TlbCsrRd
+
+BasicCsrRd:
+ la.pcrel $t0, BasicCsrRead
+ alsl.d $t0, $a0, $t0, 3
+ jirl $zero, $t0, 0
+
+TlbCsrRd:
+ li.w $t0, LOONGARCH_CSR_TLBIDX
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_RVACFG
+ bltu $t0, $a0, CfgCsrRd
+ la.pcrel $t0, TlbCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+CfgCsrRd:
+ li.w $t0, LOONGARCH_CSR_CPUNUM
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_PRCFG3
+ bltu $t0, $a0, KcsCsrRd
+ la.pcrel $t0, CfgCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+KcsCsrRd:
+ li.w $t0, LOONGARCH_CSR_KS0
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_KS8
+ bltu $t0, $a0, StableTimerCsrRd
+ la.pcrel $t0, KcsCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_KS0
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+StableTimerCsrRd:
+ li.w $t0, LOONGARCH_CSR_TMID
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_TINTCLR
+ bltu $t0, $a0, TlbRefillCsrRd
+ la.pcrel $t0, StableTimerCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_TMID
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+TlbRefillCsrRd:
+ li.w $t0, LOONGARCH_CSR_TLBREBASE
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_TLBREHI
+ bltu $t0, $a0, DirMapCsrRd
+ la.pcrel $t0, TlbRefillCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+DirMapCsrRd:
+ li.w $t0, LOONGARCH_CSR_DMWIN0
+ bltu $a0, $t0, ReadSelNumErr
+ li.w $t0, LOONGARCH_CSR_DMWIN3
+ bltu $t0, $a0, ReadSelNumErr
+ la.pcrel $t0, DirMapCsrRead
+ addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
+ alsl.d $t0, $t1, $t0, 3
+ jirl $zero, $t0, 0
+
+ReadSelNumErr:
+ addi.d $a0, $zero, -1
+ jirl $zero, $ra, 0
+
+BasicCsrRead:
+ CsrSel = LOONGARCH_CSR_CRMD
+ .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbCsrRead:
+ CsrSel = LOONGARCH_CSR_TLBIDX
+ .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+CfgCsrRead:
+ CsrSel = LOONGARCH_CSR_CPUNUM
+ .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+KcsCsrRead:
+ CsrSel = LOONGARCH_CSR_KS0
+ .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+StableTimerCsrRead:
+ CsrSel = LOONGARCH_CSR_TMID
+ .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbRefillCsrRead:
+ CsrSel = LOONGARCH_CSR_TLBREBASE
+ .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+DirMapCsrRead:
+ CsrSel = LOONGARCH_CSR_DMWIN0
+ .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
+ AsmCsrRd CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+ASM_PFX(AsmCsrWrite):
+ blt $a0, $zero, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_EBASE
+ bltu $t0, $a0, TlbCsrWr
+
+BasicCsrWr:
+ la.pcrel $t0, BasicCsrWrite
+ alsl.d $t0, $a0, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+TlbCsrWr:
+ li.w $t0, LOONGARCH_CSR_TLBIDX
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_RVACFG
+ bltu $t0, $a0, CfgCsrWr
+ la.pcrel $t0, TlbCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+CfgCsrWr:
+ li.w $t0, LOONGARCH_CSR_CPUNUM
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_PRCFG3
+ bltu $t0, $a0, KcsCsrWr
+ la.pcrel $t0, CfgCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+KcsCsrWr:
+ li.w $t0, LOONGARCH_CSR_KS0
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_KS8
+ bltu $t0, $a0, StableTimerCsrWr
+ la.pcrel $t0, KcsCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_KS0
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+StableTimerCsrWr:
+ li.w $t0, LOONGARCH_CSR_TMID
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_TINTCLR
+ bltu $t0, $a0, TlbRefillCsrWr
+ la.pcrel $t0, StableTimerCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_TMID
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+TlbRefillCsrWr:
+ li.w $t0, LOONGARCH_CSR_TLBREBASE
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_TLBREHI
+ bltu $t0, $a0, DirMapCsrWr
+ la.pcrel $t0, TlbRefillCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+DirMapCsrWr:
+ li.w $t0, LOONGARCH_CSR_DMWIN0
+ bltu $a0, $t0, WriteSelNumErr
+ li.w $t0, LOONGARCH_CSR_DMWIN3
+ bltu $t0, $a0, WriteSelNumErr
+ la.pcrel $t0, DirMapCsrWrite
+ addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ jirl $zero, $t0, 0
+
+WriteSelNumErr:
+ addi.d $a0, $zero, -1
+ jirl $zero, $ra, 0
+
+BasicCsrWrite:
+ CsrSel = LOONGARCH_CSR_CRMD
+ .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbCsrWrite:
+ CsrSel = LOONGARCH_CSR_TLBIDX
+ .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+CfgCsrWrite:
+ CsrSel = LOONGARCH_CSR_CPUNUM
+ .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+KcsCsrWrite:
+ CsrSel = LOONGARCH_CSR_KS0
+ .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+StableTimerCsrWrite:
+ CsrSel = LOONGARCH_CSR_TMID
+ .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbRefillCsrWrite:
+ CsrSel = LOONGARCH_CSR_TLBREBASE
+ .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+DirMapCsrWrite:
+ CsrSel = LOONGARCH_CSR_DMWIN0
+ .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
+ AsmCsrWr CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+
+ASM_PFX(AsmCsrXChg):
+ blt $a0, $zero, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_EBASE
+ bltu $t0, $a0, TlbCsrXchg
+
+BasicCsrXchg:
+ la.pcrel $t0, BasicCsrXchange
+ alsl.d $t0, $a0, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+TlbCsrXchg:
+ li.w $t0, LOONGARCH_CSR_TLBIDX
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_RVACFG
+ bltu $t0, $a0, CfgCsrXchg
+ la.pcrel $t0, TlbCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+CfgCsrXchg:
+ li.w $t0, LOONGARCH_CSR_CPUNUM
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_PRCFG3
+ bltu $t0, $a0, KcsCsrXchg
+ la.pcrel $t0, CfgCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+KcsCsrXchg:
+ li.w $t0, LOONGARCH_CSR_KS0
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_KS8
+ bltu $t0, $a0, StableTimerCsrXchg
+ la.pcrel $t0, KcsCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_KS0
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+StableTimerCsrXchg:
+ li.w $t0, LOONGARCH_CSR_TMID
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_TINTCLR
+ bltu $t0, $a0, TlbRefillCsrXchg
+ la.pcrel $t0, StableTimerCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_TMID
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+TlbRefillCsrXchg:
+ li.w $t0, LOONGARCH_CSR_TLBREBASE
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_TLBREHI
+ bltu $t0, $a0, DirMapCsrXchg
+ la.pcrel $t0, TlbRefillCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+DirMapCsrXchg:
+ li.w $t0, LOONGARCH_CSR_DMWIN0
+ bltu $a0, $t0, XchgSelNumErr
+ li.w $t0, LOONGARCH_CSR_DMWIN3
+ bltu $t0, $a0, XchgSelNumErr
+ la.pcrel $t0, DirMapCsrXchange
+ addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
+ alsl.d $t0, $t1, $t0, 3
+ move $a0, $a1
+ move $a1, $a2
+ jirl $zero, $t0, 0
+
+XchgSelNumErr:
+ addi.d $a0, $zero, -1
+ jirl $zero, $ra, 0
+
+BasicCsrXchange:
+ CsrSel = LOONGARCH_CSR_CRMD
+ .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbCsrXchange:
+ CsrSel = LOONGARCH_CSR_TLBIDX
+ .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+CfgCsrXchange:
+ CsrSel = LOONGARCH_CSR_CPUNUM
+ .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+KcsCsrXchange:
+ CsrSel = LOONGARCH_CSR_KS0
+ .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+StableTimerCsrXchange:
+ CsrSel = LOONGARCH_CSR_TMID
+ .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+TlbRefillCsrXchange:
+ CsrSel = LOONGARCH_CSR_TLBREBASE
+ .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+
+DirMapCsrXchange:
+ CsrSel = LOONGARCH_CSR_DMWIN0
+ .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
+ AsmCsrXChange CsrSel
+ CsrSel = CsrSel + 1
+ .endr
+.end
diff --git a/MdePkg/Library/BaseLib/LoongArch64/Csr.c b/MdePkg/Library/BaseLib/LoongArch64/Csr.c
new file mode 100644
index 0000000000..d51f30aacc
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/Csr.c
@@ -0,0 +1,81 @@
+/** @file
+ LoongArch CSR operation functions.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+UINTN
+AsmCsrRead (
+ IN UINT16 Select
+ );
+
+UINTN
+AsmCsrWrite (
+ IN UINT16 Select,
+ IN UINTN Value
+ );
+
+UINTN
+AsmCsrXChg (
+ IN UINT16 Select,
+ IN UINTN Value,
+ IN UINTN Mask
+ );
+
+/**
+ CSR read operation.
+
+ @param[in] Select CSR read instruction select values.
+
+ @return The return value of csrrd instruction, return -1 means Select is out of support.
+**/
+UINTN
+EFIAPI
+CsrRead (
+ IN UINT16 Select
+ )
+{
+ return AsmCsrRead (Select);
+}
+
+/**
+ CSR write operation.
+
+ @param[in] Select CSR write instruction select values.
+ @param[in, out] Value The csrwr will write the value.
+
+ @return The return value of csrwr instruction, that is, store the old value of
+ the register, return -1 means Select is out of support.
+**/
+UINTN
+EFIAPI
+CsrWrite (
+ IN UINT16 Select,
+ IN OUT UINTN Value
+ )
+{
+ return AsmCsrWrite (Select, Value);
+}
+
+/**
+ CSR exchange operation.
+
+ @param[in] Select CSR exchange instruction select values.
+ @param[in, out] Value The csrxchg will write the value.
+ @param[in] Mask The csrxchg mask value.
+
+ @return The return value of csrxchg instruction, that is, store the old value of
+ the register, return -1 means Select is out of support.
+**/
+UINTN
+EFIAPI
+CsrXChg (
+ IN UINT16 Select,
+ IN OUT UINTN Value,
+ IN UINTN Mask
+ )
+{
+ return AsmCsrXChg (Select, Value, Mask);
+}
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110711): https://edk2.groups.io/g/devel/message/110711
Mute This Topic: https://groups.io/mt/102413855/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR operation for LoongArch
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR " Chao Li
@ 2023-11-07 3:31 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:31 UTC (permalink / raw)
To: devel@edk2.groups.io, lichao@loongson.cn
Cc: Gao, Liming, Liu, Zhiguang, Bibo Mao, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chao Li
> Sent: Sunday, November 5, 2023 7:27 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>;
> Bibo Mao <maobibo@loongson.cn>
> Subject: [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR operation for
> LoongArch
>
> Add CsrRead, CsrWrite and CsrXChg functions for LoongArch, and use
> them
> to operate the CSR register of LoongArch architecture.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> Co-authored-by: Bibo Mao <maobibo@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 45 +++
> MdePkg/Library/BaseLib/BaseLib.inf | 2 +
> MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S | 422
> ++++++++++++++++++++
> MdePkg/Library/BaseLib/LoongArch64/Csr.c | 81 ++++
> 4 files changed, 550 insertions(+)
> create mode 100644 MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
> create mode 100644 MdePkg/Library/BaseLib/LoongArch64/Csr.c
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index 55d53c75a0..234f3065c2 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -293,6 +293,51 @@ AsmReadStableCounter (
> VOID
> );
>
> +/**
> + CSR read operation.
> +
> + @param[in] Select CSR read instruction select values.
> +
> + @return The return value of csrrd instruction, return -1 means
> no CSR instruction
> + is found.
> +**/
> +UINTN
> +CsrRead (
> + IN UINT16 Select
> + );
> +
> +/**
> + CSR write operation.
> +
> + @param[in] Select CSR write instruction select values.
> + @param[in] Value The csrwr will write the value.
> +
> + @return The return value of csrwr instruction, that is, store
> the old value of
> + the register, return -1 means no CSR instruction is
> found.
> +**/
> +UINTN
> +CsrWrite (
> + IN UINT16 Select,
> + IN UINTN Value
> + );
> +
> +/**
> + CSR exchange operation.
> +
> + @param[in] Select CSR exchange instruction select values.
> + @param[in] Value The csrxchg will write the value.
> + @param[in] Mask The csrxchg mask value.
> +
> + @return The return value of csrxchg instruction, that is, store
> the old value of
> + the register, return -1 means no CSR instruction is
> found.
> +**/
> +UINTN
> +CsrXChg (
> + IN UINT16 Select,
> + IN UINTN Value,
> + IN UINTN Mask
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Library/BaseLib/BaseLib.inf
> b/MdePkg/Library/BaseLib/BaseLib.inf
> index aaf221822b..74a323c798 100644
> --- a/MdePkg/Library/BaseLib/BaseLib.inf
> +++ b/MdePkg/Library/BaseLib/BaseLib.inf
> @@ -409,7 +409,9 @@
> [Sources.LOONGARCH64]
> Math64.c
> Unaligned.c
> + LoongArch64/Csr.c
> LoongArch64/InternalSwitchStack.c
> + LoongArch64/AsmCsr.S | GCC
> LoongArch64/GetInterruptState.S | GCC
> LoongArch64/EnableInterrupts.S | GCC
> LoongArch64/DisableInterrupts.S | GCC
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
> b/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
> new file mode 100644
> index 0000000000..25dd060ede
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/AsmCsr.S
> @@ -0,0 +1,422 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# LoongArch ASM CSR operation functions
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +
> +#include <Register/LoongArch64/Csr.h>
> +
> +ASM_GLOBAL ASM_PFX (AsmCsrRead)
> +ASM_GLOBAL ASM_PFX (AsmCsrWrite)
> +ASM_GLOBAL ASM_PFX (AsmCsrXChg)
> +
> +.macro AsmCsrRd Sel
> + csrrd $a0, \Sel
> + jirl $zero, $ra, 0
> +.endm
> +
> +.macro AsmCsrWr Sel
> + csrwr $a0, \Sel
> + jirl $zero, $ra, 0
> +.endm
> +
> +.macro AsmCsrXChange Sel
> + csrxchg $a0, $a1, \Sel
> + jirl $zero, $ra, 0
> +.endm
> +
> +ASM_PFX(AsmCsrRead):
> + blt $a0, $zero, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_EBASE
> + bltu $t0, $a0, TlbCsrRd
> +
> +BasicCsrRd:
> + la.pcrel $t0, BasicCsrRead
> + alsl.d $t0, $a0, $t0, 3
> + jirl $zero, $t0, 0
> +
> +TlbCsrRd:
> + li.w $t0, LOONGARCH_CSR_TLBIDX
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_RVACFG
> + bltu $t0, $a0, CfgCsrRd
> + la.pcrel $t0, TlbCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +CfgCsrRd:
> + li.w $t0, LOONGARCH_CSR_CPUNUM
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_PRCFG3
> + bltu $t0, $a0, KcsCsrRd
> + la.pcrel $t0, CfgCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +KcsCsrRd:
> + li.w $t0, LOONGARCH_CSR_KS0
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_KS8
> + bltu $t0, $a0, StableTimerCsrRd
> + la.pcrel $t0, KcsCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_KS0
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +StableTimerCsrRd:
> + li.w $t0, LOONGARCH_CSR_TMID
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_TINTCLR
> + bltu $t0, $a0, TlbRefillCsrRd
> + la.pcrel $t0, StableTimerCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_TMID
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +TlbRefillCsrRd:
> + li.w $t0, LOONGARCH_CSR_TLBREBASE
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_TLBREHI
> + bltu $t0, $a0, DirMapCsrRd
> + la.pcrel $t0, TlbRefillCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +DirMapCsrRd:
> + li.w $t0, LOONGARCH_CSR_DMWIN0
> + bltu $a0, $t0, ReadSelNumErr
> + li.w $t0, LOONGARCH_CSR_DMWIN3
> + bltu $t0, $a0, ReadSelNumErr
> + la.pcrel $t0, DirMapCsrRead
> + addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
> + alsl.d $t0, $t1, $t0, 3
> + jirl $zero, $t0, 0
> +
> +ReadSelNumErr:
> + addi.d $a0, $zero, -1
> + jirl $zero, $ra, 0
> +
> +BasicCsrRead:
> + CsrSel = LOONGARCH_CSR_CRMD
> + .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbCsrRead:
> + CsrSel = LOONGARCH_CSR_TLBIDX
> + .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +CfgCsrRead:
> + CsrSel = LOONGARCH_CSR_CPUNUM
> + .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +KcsCsrRead:
> + CsrSel = LOONGARCH_CSR_KS0
> + .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +StableTimerCsrRead:
> + CsrSel = LOONGARCH_CSR_TMID
> + .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbRefillCsrRead:
> + CsrSel = LOONGARCH_CSR_TLBREBASE
> + .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +DirMapCsrRead:
> + CsrSel = LOONGARCH_CSR_DMWIN0
> + .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
> + AsmCsrRd CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +ASM_PFX(AsmCsrWrite):
> + blt $a0, $zero, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_EBASE
> + bltu $t0, $a0, TlbCsrWr
> +
> +BasicCsrWr:
> + la.pcrel $t0, BasicCsrWrite
> + alsl.d $t0, $a0, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +TlbCsrWr:
> + li.w $t0, LOONGARCH_CSR_TLBIDX
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_RVACFG
> + bltu $t0, $a0, CfgCsrWr
> + la.pcrel $t0, TlbCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +CfgCsrWr:
> + li.w $t0, LOONGARCH_CSR_CPUNUM
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_PRCFG3
> + bltu $t0, $a0, KcsCsrWr
> + la.pcrel $t0, CfgCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +KcsCsrWr:
> + li.w $t0, LOONGARCH_CSR_KS0
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_KS8
> + bltu $t0, $a0, StableTimerCsrWr
> + la.pcrel $t0, KcsCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_KS0
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +StableTimerCsrWr:
> + li.w $t0, LOONGARCH_CSR_TMID
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_TINTCLR
> + bltu $t0, $a0, TlbRefillCsrWr
> + la.pcrel $t0, StableTimerCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_TMID
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +TlbRefillCsrWr:
> + li.w $t0, LOONGARCH_CSR_TLBREBASE
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_TLBREHI
> + bltu $t0, $a0, DirMapCsrWr
> + la.pcrel $t0, TlbRefillCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +DirMapCsrWr:
> + li.w $t0, LOONGARCH_CSR_DMWIN0
> + bltu $a0, $t0, WriteSelNumErr
> + li.w $t0, LOONGARCH_CSR_DMWIN3
> + bltu $t0, $a0, WriteSelNumErr
> + la.pcrel $t0, DirMapCsrWrite
> + addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + jirl $zero, $t0, 0
> +
> +WriteSelNumErr:
> + addi.d $a0, $zero, -1
> + jirl $zero, $ra, 0
> +
> +BasicCsrWrite:
> + CsrSel = LOONGARCH_CSR_CRMD
> + .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbCsrWrite:
> + CsrSel = LOONGARCH_CSR_TLBIDX
> + .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +CfgCsrWrite:
> + CsrSel = LOONGARCH_CSR_CPUNUM
> + .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +KcsCsrWrite:
> + CsrSel = LOONGARCH_CSR_KS0
> + .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +StableTimerCsrWrite:
> + CsrSel = LOONGARCH_CSR_TMID
> + .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbRefillCsrWrite:
> + CsrSel = LOONGARCH_CSR_TLBREBASE
> + .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +DirMapCsrWrite:
> + CsrSel = LOONGARCH_CSR_DMWIN0
> + .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
> + AsmCsrWr CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +
> +ASM_PFX(AsmCsrXChg):
> + blt $a0, $zero, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_EBASE
> + bltu $t0, $a0, TlbCsrXchg
> +
> +BasicCsrXchg:
> + la.pcrel $t0, BasicCsrXchange
> + alsl.d $t0, $a0, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +TlbCsrXchg:
> + li.w $t0, LOONGARCH_CSR_TLBIDX
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_RVACFG
> + bltu $t0, $a0, CfgCsrXchg
> + la.pcrel $t0, TlbCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBIDX
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +CfgCsrXchg:
> + li.w $t0, LOONGARCH_CSR_CPUNUM
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_PRCFG3
> + bltu $t0, $a0, KcsCsrXchg
> + la.pcrel $t0, CfgCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_CPUNUM
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +KcsCsrXchg:
> + li.w $t0, LOONGARCH_CSR_KS0
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_KS8
> + bltu $t0, $a0, StableTimerCsrXchg
> + la.pcrel $t0, KcsCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_KS0
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +StableTimerCsrXchg:
> + li.w $t0, LOONGARCH_CSR_TMID
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_TINTCLR
> + bltu $t0, $a0, TlbRefillCsrXchg
> + la.pcrel $t0, StableTimerCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_TMID
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +TlbRefillCsrXchg:
> + li.w $t0, LOONGARCH_CSR_TLBREBASE
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_TLBREHI
> + bltu $t0, $a0, DirMapCsrXchg
> + la.pcrel $t0, TlbRefillCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_TLBREBASE
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +DirMapCsrXchg:
> + li.w $t0, LOONGARCH_CSR_DMWIN0
> + bltu $a0, $t0, XchgSelNumErr
> + li.w $t0, LOONGARCH_CSR_DMWIN3
> + bltu $t0, $a0, XchgSelNumErr
> + la.pcrel $t0, DirMapCsrXchange
> + addi.w $t1, $a0, -LOONGARCH_CSR_DMWIN0
> + alsl.d $t0, $t1, $t0, 3
> + move $a0, $a1
> + move $a1, $a2
> + jirl $zero, $t0, 0
> +
> +XchgSelNumErr:
> + addi.d $a0, $zero, -1
> + jirl $zero, $ra, 0
> +
> +BasicCsrXchange:
> + CsrSel = LOONGARCH_CSR_CRMD
> + .rept LOONGARCH_CSR_EBASE - LOONGARCH_CSR_CRMD + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbCsrXchange:
> + CsrSel = LOONGARCH_CSR_TLBIDX
> + .rept LOONGARCH_CSR_RVACFG - LOONGARCH_CSR_TLBIDX + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +CfgCsrXchange:
> + CsrSel = LOONGARCH_CSR_CPUNUM
> + .rept LOONGARCH_CSR_PRCFG3 - LOONGARCH_CSR_CPUNUM + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +KcsCsrXchange:
> + CsrSel = LOONGARCH_CSR_KS0
> + .rept LOONGARCH_CSR_KS8 - LOONGARCH_CSR_KS0 + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +StableTimerCsrXchange:
> + CsrSel = LOONGARCH_CSR_TMID
> + .rept LOONGARCH_CSR_TINTCLR - LOONGARCH_CSR_TMID + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +TlbRefillCsrXchange:
> + CsrSel = LOONGARCH_CSR_TLBREBASE
> + .rept LOONGARCH_CSR_TLBREHI - LOONGARCH_CSR_TLBREBASE + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +
> +DirMapCsrXchange:
> + CsrSel = LOONGARCH_CSR_DMWIN0
> + .rept LOONGARCH_CSR_DMWIN3 - LOONGARCH_CSR_DMWIN0 + 1
> + AsmCsrXChange CsrSel
> + CsrSel = CsrSel + 1
> + .endr
> +.end
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/Csr.c
> b/MdePkg/Library/BaseLib/LoongArch64/Csr.c
> new file mode 100644
> index 0000000000..d51f30aacc
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/Csr.c
> @@ -0,0 +1,81 @@
> +/** @file
> + LoongArch CSR operation functions.
> +
> + Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +UINTN
> +AsmCsrRead (
> + IN UINT16 Select
> + );
> +
> +UINTN
> +AsmCsrWrite (
> + IN UINT16 Select,
> + IN UINTN Value
> + );
> +
> +UINTN
> +AsmCsrXChg (
> + IN UINT16 Select,
> + IN UINTN Value,
> + IN UINTN Mask
> + );
> +
> +/**
> + CSR read operation.
> +
> + @param[in] Select CSR read instruction select values.
> +
> + @return The return value of csrrd instruction, return -1 means
> Select is out of support.
> +**/
> +UINTN
> +EFIAPI
> +CsrRead (
> + IN UINT16 Select
> + )
> +{
> + return AsmCsrRead (Select);
> +}
> +
> +/**
> + CSR write operation.
> +
> + @param[in] Select CSR write instruction select values.
> + @param[in, out] Value The csrwr will write the value.
> +
> + @return The return value of csrwr instruction, that is, store
> the old value of
> + the register, return -1 means Select is out of support.
> +**/
> +UINTN
> +EFIAPI
> +CsrWrite (
> + IN UINT16 Select,
> + IN OUT UINTN Value
> + )
> +{
> + return AsmCsrWrite (Select, Value);
> +}
> +
> +/**
> + CSR exchange operation.
> +
> + @param[in] Select CSR exchange instruction select values.
> + @param[in, out] Value The csrxchg will write the value.
> + @param[in] Mask The csrxchg mask value.
> +
> + @return The return value of csrxchg instruction, that is, store
> the old value of
> + the register, return -1 means Select is out of support.
> +**/
> +UINTN
> +EFIAPI
> +CsrXChg (
> + IN UINT16 Select,
> + IN OUT UINTN Value,
> + IN UINTN Mask
> + )
> +{
> + return AsmCsrXChg (Select, Value, Mask);
> +}
> --
> 2.27.0
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110793): https://edk2.groups.io/g/devel/message/110793
Mute This Topic: https://groups.io/mt/102413855/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 08/30] MdePkg: Add IOCSR operation for LoongArch
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (6 preceding siblings ...)
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 07/30] MdePkg: Add CSR " Chao Li
@ 2023-11-06 3:27 ` Chao Li
2023-11-07 3:32 ` Michael D Kinney
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 09/30] UefiCpuPkg: Add LoongArch64 CPU Timer library Chao Li
` (24 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:27 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Liming Gao, Zhiguang Liu
Add IoCsrRead8, IoCsrRead16, IoCsrRead32, IoCsrRead64, IoCsrWrite8,
IoCsrWrite16, IoCsrWrite32, IoCsrWrite64 to operate the IOCSR registers
of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
MdePkg/Include/Library/BaseLib.h | 112 +++++++++++++++++++
MdePkg/Library/BaseLib/BaseLib.inf | 1 +
MdePkg/Library/BaseLib/LoongArch64/IoCsr.S | 120 +++++++++++++++++++++
3 files changed, 233 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index 234f3065c2..88ee6e9d51 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -338,6 +338,118 @@ CsrXChg (
IN UINTN Mask
);
+/**
+ IO CSR read byte operation.
+
+ @param[in] Select IO CSR read instruction select values.
+
+ @return The return value of iocsrrd.b instruction.
+
+**/
+UINT8
+IoCsrRead8 (
+ IN UINTN Select
+ );
+
+/**
+ IO CSR read half word operation.
+
+ @param[in] Select IO CSR read instruction select values.
+
+ @return The return value of iocsrrd.h instruction.
+
+**/
+UINT16
+IoCsrRead16 (
+ IN UINTN Select
+ );
+
+/**
+ IO CSR read word operation.
+
+ @param[in] Select IO CSR read instruction select values.
+
+ @return The return value of iocsrrd.w instruction.
+
+**/
+UINT32
+IoCsrRead32 (
+ IN UINTN Select
+ );
+
+/**
+ IO CSR read double word operation. Only for LoongArch64.
+
+ @param[in] Select IO CSR read instruction select values.
+
+ @return The return value of iocsrrd.d instruction.
+
+**/
+UINT64
+IoCsrRead64 (
+ IN UINTN Select
+ );
+
+/**
+ IO CSR write byte operation.
+
+ @param[in] Select IO CSR write instruction select values.
+ @param[in] Value The iocsrwr.b will write the value.
+
+ @return VOID.
+
+**/
+VOID
+IoCsrWrite8 (
+ IN UINTN Select,
+ IN UINT8 Value
+ );
+
+/**
+ IO CSR write half word operation.
+
+ @param[in] Select IO CSR write instruction select values.
+ @param[in] Value The iocsrwr.h will write the value.
+
+ @return VOID.
+
+**/
+VOID
+IoCsrWrite16 (
+ IN UINTN Select,
+ IN UINT16 Value
+ );
+
+/**
+ IO CSR write word operation.
+
+ @param[in] Select IO CSR write instruction select values.
+ @param[in] Value The iocsrwr.w will write the value.
+
+ @return VOID.
+
+**/
+VOID
+IoCsrWrite32 (
+ IN UINTN Select,
+ IN UINT32 Value
+ );
+
+/**
+ IO CSR write double word operation. Only for LoongArch64.
+
+ @param[in] Select IO CSR write instruction select values.
+ @param[in] Value The iocsrwr.d will write the value.
+
+ @return VOID.
+
+**/
+VOID
+IoCsrWrite64 (
+ IN UINTN Select,
+ IN UINT64 Value
+ );
+
#endif // defined (MDE_CPU_LOONGARCH64)
//
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index 74a323c798..e72724c1c1 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -412,6 +412,7 @@
LoongArch64/Csr.c
LoongArch64/InternalSwitchStack.c
LoongArch64/AsmCsr.S | GCC
+ LoongArch64/IoCsr.S | GCC
LoongArch64/GetInterruptState.S | GCC
LoongArch64/EnableInterrupts.S | GCC
LoongArch64/DisableInterrupts.S | GCC
diff --git a/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S b/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
new file mode 100644
index 0000000000..4c0009b93a
--- /dev/null
+++ b/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
@@ -0,0 +1,120 @@
+#------------------------------------------------------------------------------
+#
+# LoongArch ASM IO CSR operation functions
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+ASM_GLOBAL ASM_PFX (IoCsrRead8)
+ASM_GLOBAL ASM_PFX (IoCsrRead16)
+ASM_GLOBAL ASM_PFX (IoCsrRead32)
+ASM_GLOBAL ASM_PFX (IoCsrRead64)
+
+ASM_GLOBAL ASM_PFX (IoCsrWrite8)
+ASM_GLOBAL ASM_PFX (IoCsrWrite16)
+ASM_GLOBAL ASM_PFX (IoCsrWrite32)
+ASM_GLOBAL ASM_PFX (IoCsrWrite64)
+
+#/**
+# IO CSR read byte operation.
+#
+# @param[in] Select IO CSR read instruction select values.
+#
+# @return The return value of iocsrrd.b instruction.
+#
+#**/
+ASM_PFX (IoCsrRead8):
+ iocsrrd.b $a0, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR read half word operation.
+#
+# @param[in] Select IO CSR read instruction select values.
+#
+# @return The return value of iocsrrd.h instruction.
+#
+#**/
+ASM_PFX (IoCsrRead16):
+ iocsrrd.h $a0, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR read word operation.
+#
+# @param[in] Select IO CSR read instruction select values.
+#
+# @return The return value of iocsrrd.w instruction.
+#
+#**/
+ASM_PFX (IoCsrRead32):
+ iocsrrd.w $a0, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR read double word operation. Only for LoongArch64.
+#
+# @param[in] Select IO CSR read instruction select values.
+#
+# @return The return value of iocsrrd.d instruction.
+#
+#**/
+ASM_PFX (IoCsrRead64):
+ iocsrrd.d $a0, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR write byte operation.
+#
+# @param[in] Select IO CSR write instruction select values.
+# @param[in] Value The iocsrwr.b will write the value.
+#
+# @return VOID.
+#
+#**/
+ASM_PFX (IoCsrWrite8):
+ iocsrwr.b $a1, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR write half word operation.
+#
+# @param[in] Select IO CSR write instruction select values.
+# @param[in] Value The iocsrwr.h will write the value.
+#
+# @return VOID.
+#
+#**/
+ASM_PFX (IoCsrWrite16):
+ iocsrwr.h $a1, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR write word operation.
+#
+# @param[in] Select IO CSR write instruction select values.
+# @param[in] Value The iocsrwr.w will write the value.
+#
+# @return VOID.
+#
+#**/
+ASM_PFX (IoCsrWrite32):
+ iocsrwr.w $a1, $a0
+ jirl $zero, $ra, 0
+
+#/**
+# IO CSR write double word operation. Only for LoongArch64.
+#
+# @param[in] Select IO CSR write instruction select values.
+# @param[in] Value The iocsrwr.d will write the value.
+#
+# @return VOID.
+#
+#**/
+ASM_PFX (IoCsrWrite64):
+ iocsrwr.d $a1, $a0
+ jirl $zero, $ra, 0
+ .end
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110712): https://edk2.groups.io/g/devel/message/110712
Mute This Topic: https://groups.io/mt/102413858/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 08/30] MdePkg: Add IOCSR operation for LoongArch
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 08/30] MdePkg: Add IOCSR " Chao Li
@ 2023-11-07 3:32 ` Michael D Kinney
0 siblings, 0 replies; 71+ messages in thread
From: Michael D Kinney @ 2023-11-07 3:32 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Gao, Liming, Liu, Zhiguang, Kinney, Michael D
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 7:28 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>
> Subject: [PATCH v2 08/30] MdePkg: Add IOCSR operation for LoongArch
>
> Add IoCsrRead8, IoCsrRead16, IoCsrRead32, IoCsrRead64, IoCsrWrite8,
> IoCsrWrite16, IoCsrWrite32, IoCsrWrite64 to operate the IOCSR
> registers
> of LoongArch architecture.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> MdePkg/Include/Library/BaseLib.h | 112 +++++++++++++++++++
> MdePkg/Library/BaseLib/BaseLib.inf | 1 +
> MdePkg/Library/BaseLib/LoongArch64/IoCsr.S | 120
> +++++++++++++++++++++
> 3 files changed, 233 insertions(+)
> create mode 100644 MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
>
> diff --git a/MdePkg/Include/Library/BaseLib.h
> b/MdePkg/Include/Library/BaseLib.h
> index 234f3065c2..88ee6e9d51 100644
> --- a/MdePkg/Include/Library/BaseLib.h
> +++ b/MdePkg/Include/Library/BaseLib.h
> @@ -338,6 +338,118 @@ CsrXChg (
> IN UINTN Mask
> );
>
> +/**
> + IO CSR read byte operation.
> +
> + @param[in] Select IO CSR read instruction select values.
> +
> + @return The return value of iocsrrd.b instruction.
> +
> +**/
> +UINT8
> +IoCsrRead8 (
> + IN UINTN Select
> + );
> +
> +/**
> + IO CSR read half word operation.
> +
> + @param[in] Select IO CSR read instruction select values.
> +
> + @return The return value of iocsrrd.h instruction.
> +
> +**/
> +UINT16
> +IoCsrRead16 (
> + IN UINTN Select
> + );
> +
> +/**
> + IO CSR read word operation.
> +
> + @param[in] Select IO CSR read instruction select values.
> +
> + @return The return value of iocsrrd.w instruction.
> +
> +**/
> +UINT32
> +IoCsrRead32 (
> + IN UINTN Select
> + );
> +
> +/**
> + IO CSR read double word operation. Only for LoongArch64.
> +
> + @param[in] Select IO CSR read instruction select values.
> +
> + @return The return value of iocsrrd.d instruction.
> +
> +**/
> +UINT64
> +IoCsrRead64 (
> + IN UINTN Select
> + );
> +
> +/**
> + IO CSR write byte operation.
> +
> + @param[in] Select IO CSR write instruction select values.
> + @param[in] Value The iocsrwr.b will write the value.
> +
> + @return VOID.
> +
> +**/
> +VOID
> +IoCsrWrite8 (
> + IN UINTN Select,
> + IN UINT8 Value
> + );
> +
> +/**
> + IO CSR write half word operation.
> +
> + @param[in] Select IO CSR write instruction select values.
> + @param[in] Value The iocsrwr.h will write the value.
> +
> + @return VOID.
> +
> +**/
> +VOID
> +IoCsrWrite16 (
> + IN UINTN Select,
> + IN UINT16 Value
> + );
> +
> +/**
> + IO CSR write word operation.
> +
> + @param[in] Select IO CSR write instruction select values.
> + @param[in] Value The iocsrwr.w will write the value.
> +
> + @return VOID.
> +
> +**/
> +VOID
> +IoCsrWrite32 (
> + IN UINTN Select,
> + IN UINT32 Value
> + );
> +
> +/**
> + IO CSR write double word operation. Only for LoongArch64.
> +
> + @param[in] Select IO CSR write instruction select values.
> + @param[in] Value The iocsrwr.d will write the value.
> +
> + @return VOID.
> +
> +**/
> +VOID
> +IoCsrWrite64 (
> + IN UINTN Select,
> + IN UINT64 Value
> + );
> +
> #endif // defined (MDE_CPU_LOONGARCH64)
>
> //
> diff --git a/MdePkg/Library/BaseLib/BaseLib.inf
> b/MdePkg/Library/BaseLib/BaseLib.inf
> index 74a323c798..e72724c1c1 100644
> --- a/MdePkg/Library/BaseLib/BaseLib.inf
> +++ b/MdePkg/Library/BaseLib/BaseLib.inf
> @@ -412,6 +412,7 @@
> LoongArch64/Csr.c
> LoongArch64/InternalSwitchStack.c
> LoongArch64/AsmCsr.S | GCC
> + LoongArch64/IoCsr.S | GCC
> LoongArch64/GetInterruptState.S | GCC
> LoongArch64/EnableInterrupts.S | GCC
> LoongArch64/DisableInterrupts.S | GCC
> diff --git a/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
> b/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
> new file mode 100644
> index 0000000000..4c0009b93a
> --- /dev/null
> +++ b/MdePkg/Library/BaseLib/LoongArch64/IoCsr.S
> @@ -0,0 +1,120 @@
> +#--------------------------------------------------------------------
> ----------
> +#
> +# LoongArch ASM IO CSR operation functions
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#--------------------------------------------------------------------
> ----------
> +
> +ASM_GLOBAL ASM_PFX (IoCsrRead8)
> +ASM_GLOBAL ASM_PFX (IoCsrRead16)
> +ASM_GLOBAL ASM_PFX (IoCsrRead32)
> +ASM_GLOBAL ASM_PFX (IoCsrRead64)
> +
> +ASM_GLOBAL ASM_PFX (IoCsrWrite8)
> +ASM_GLOBAL ASM_PFX (IoCsrWrite16)
> +ASM_GLOBAL ASM_PFX (IoCsrWrite32)
> +ASM_GLOBAL ASM_PFX (IoCsrWrite64)
> +
> +#/**
> +# IO CSR read byte operation.
> +#
> +# @param[in] Select IO CSR read instruction select values.
> +#
> +# @return The return value of iocsrrd.b instruction.
> +#
> +#**/
> +ASM_PFX (IoCsrRead8):
> + iocsrrd.b $a0, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR read half word operation.
> +#
> +# @param[in] Select IO CSR read instruction select values.
> +#
> +# @return The return value of iocsrrd.h instruction.
> +#
> +#**/
> +ASM_PFX (IoCsrRead16):
> + iocsrrd.h $a0, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR read word operation.
> +#
> +# @param[in] Select IO CSR read instruction select values.
> +#
> +# @return The return value of iocsrrd.w instruction.
> +#
> +#**/
> +ASM_PFX (IoCsrRead32):
> + iocsrrd.w $a0, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR read double word operation. Only for LoongArch64.
> +#
> +# @param[in] Select IO CSR read instruction select values.
> +#
> +# @return The return value of iocsrrd.d instruction.
> +#
> +#**/
> +ASM_PFX (IoCsrRead64):
> + iocsrrd.d $a0, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR write byte operation.
> +#
> +# @param[in] Select IO CSR write instruction select values.
> +# @param[in] Value The iocsrwr.b will write the value.
> +#
> +# @return VOID.
> +#
> +#**/
> +ASM_PFX (IoCsrWrite8):
> + iocsrwr.b $a1, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR write half word operation.
> +#
> +# @param[in] Select IO CSR write instruction select values.
> +# @param[in] Value The iocsrwr.h will write the value.
> +#
> +# @return VOID.
> +#
> +#**/
> +ASM_PFX (IoCsrWrite16):
> + iocsrwr.h $a1, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR write word operation.
> +#
> +# @param[in] Select IO CSR write instruction select values.
> +# @param[in] Value The iocsrwr.w will write the value.
> +#
> +# @return VOID.
> +#
> +#**/
> +ASM_PFX (IoCsrWrite32):
> + iocsrwr.w $a1, $a0
> + jirl $zero, $ra, 0
> +
> +#/**
> +# IO CSR write double word operation. Only for LoongArch64.
> +#
> +# @param[in] Select IO CSR write instruction select values.
> +# @param[in] Value The iocsrwr.d will write the value.
> +#
> +# @return VOID.
> +#
> +#**/
> +ASM_PFX (IoCsrWrite64):
> + iocsrwr.d $a1, $a0
> + jirl $zero, $ra, 0
> + .end
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110795): https://edk2.groups.io/g/devel/message/110795
Mute This Topic: https://groups.io/mt/102413858/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 09/30] UefiCpuPkg: Add LoongArch64 CPU Timer library
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (7 preceding siblings ...)
2023-11-06 3:27 ` [edk2-devel] [PATCH v2 08/30] MdePkg: Add IOCSR " Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 10/30] UefiCpuPkg: Add CPU exception library for LoongArch Chao Li
` (23 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel; +Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann
Add the LoongArch64 CPU Timer library, using CPUCFG 0x4 and 0x5 for
Stable Counter frequency.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
.../BaseLoongArch64CpuTimerLib.inf | 30 +++
.../BaseLoongArch64CpuTimerLib.uni | 15 ++
.../BaseLoongArch64CpuTimerLib/CpuTimerLib.c | 226 ++++++++++++++++++
UefiCpuPkg/UefiCpuPkg.dsc | 3 +
4 files changed, 274 insertions(+)
create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
new file mode 100644
index 0000000000..c00c215aec
--- /dev/null
+++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
@@ -0,0 +1,30 @@
+## @file
+# Base CPU Timer Library
+#
+# Provides base timer support using CPUCFG 0x4 and 0x5 stable counter frequency.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = BaseLoongArch64CpuTimerLib
+ FILE_GUID = 740389C7-CC44-4A2F-88DC-89D97D312E7C
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = TimerLib
+ MODULE_UNI_FILE = BaseLoongArch64CpuTimerLib.uni
+
+[Sources.common]
+ CpuTimerLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ DebugLib
diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
new file mode 100644
index 0000000000..72d38ec679
--- /dev/null
+++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// Base CPU Timer Library
+//
+// Provides base timer support using CPUCFG 0x4 and 0x5 stable counter frequency.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "LOONGARCH CPU Timer Library"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Provides basic timer support using CPUCFG 0x4 and 0x5 stable counter frequency."
diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
new file mode 100644
index 0000000000..349b881cbc
--- /dev/null
+++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
@@ -0,0 +1,226 @@
+/** @file
+ CPUCFG 0x4 and 0x5 for Stable Counter frequency instance of Timer Library.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Base.h>
+#include <Library/TimerLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Register/LoongArch64/Cpucfg.h>
+
+/**
+ Calculate clock frequency using CPUCFG 0x4 and 0x5 registers.
+
+ @param VOID.
+
+ @return The frequency in Hz.
+
+**/
+UINT32
+EFIAPI
+CalcConstFreq (
+ VOID
+ )
+{
+ UINT32 BaseFreq;
+ UINT32 ClockMultiplier;
+ UINT32 ClockDivide;
+ CPUCFG_REG4_INFO_DATA CCFreq;
+ CPUCFG_REG5_INFO_DATA CpucfgReg5Data;
+ UINT32 StableTimerFreq;
+
+ //
+ // Get the the crystal frequency corresponding to the constant
+ // frequency timer and the clock used by the timer.
+ //
+ AsmCpucfg (CPUCFG_REG4_INFO, &CCFreq.Uint32);
+
+ //
+ // Get the multiplication factor and frequency division factor
+ // corresponding to the constant frequency timer and the clock
+ // used by the timer.
+ //
+ AsmCpucfg (CPUCFG_REG5_INFO, &CpucfgReg5Data.Uint32);
+
+ BaseFreq = CCFreq.Bits.CC_FREQ;
+ ClockMultiplier = CpucfgReg5Data.Bits.CC_MUL & 0xFFFFULL;
+ ClockDivide = CpucfgReg5Data.Bits.CC_DIV & 0xFFFFULL;
+
+ if (!BaseFreq || !ClockMultiplier || !ClockDivide) {
+ DEBUG ((DEBUG_ERROR, "LoongArch Stable Timer is not available in the CPU, hence this library cannot be used.\n"));
+ StableTimerFreq = 0;
+ ASSERT (0);
+ } else {
+ StableTimerFreq = (BaseFreq * ClockMultiplier / ClockDivide);
+ }
+
+ return StableTimerFreq;
+}
+
+/**
+ Stalls the CPU for at least the given number of microseconds.
+
+ Stalls the CPU for the number of microseconds specified by MicroSeconds.
+
+ @param MicroSeconds The minimum number of microseconds to delay.
+
+ @return MicroSeconds
+
+**/
+UINTN
+EFIAPI
+MicroSecondDelay (
+ IN UINTN MicroSeconds
+ )
+{
+ UINTN Count, Ticks, Start, End;
+
+ Count = (CalcConstFreq () * MicroSeconds) / 1000000;
+ Start = AsmReadStableCounter ();
+ End = Start + Count;
+
+ do {
+ Ticks = AsmReadStableCounter ();
+ } while (Ticks < End);
+
+ return MicroSeconds;
+}
+
+/**
+ Stalls the CPU for at least the given number of nanoseconds.
+
+ Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
+
+ @param NanoSeconds The minimum number of nanoseconds to delay.
+
+ @return NanoSeconds
+
+**/
+UINTN
+EFIAPI
+NanoSecondDelay (
+ IN UINTN NanoSeconds
+ )
+{
+ UINT32 MicroSeconds;
+
+ if (NanoSeconds % 1000 == 0) {
+ MicroSeconds = NanoSeconds/1000;
+ } else {
+ MicroSeconds = NanoSeconds/1000 + 1;
+ }
+
+ MicroSecondDelay (MicroSeconds);
+
+ return NanoSeconds;
+}
+
+/**
+ Retrieves the current value of a 64-bit free running performance counter.
+
+ Retrieves the current value of a 64-bit free running performance counter. The
+ counter can either count up by 1 or count down by 1. If the physical
+ performance counter counts by a larger increment, then the counter values
+ must be translated. The properties of the counter can be retrieved from
+ GetPerformanceCounterProperties().
+
+ @return The current value of the free running performance counter.
+
+**/
+UINT64
+EFIAPI
+GetPerformanceCounter (
+ VOID
+ )
+{
+ return AsmReadStableCounter ();
+}
+
+/**
+ Retrieves the 64-bit frequency in Hz and the range of performance counter
+ values.
+
+ If StartValue is not NULL, then the value that the performance counter starts
+ with immediately after is it rolls over is returned in StartValue. If
+ EndValue is not NULL, then the value that the performance counter end with
+ immediately before it rolls over is returned in EndValue. The 64-bit
+ frequency of the performance counter in Hz is always returned. If StartValue
+ is less than EndValue, then the performance counter counts up. If StartValue
+ is greater than EndValue, then the performance counter counts down. For
+ example, a 64-bit free running counter that counts up would have a StartValue
+ of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
+ that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
+
+ @param StartValue The value the performance counter starts with when it
+ rolls over.
+ @param EndValue The value that the performance counter ends with before
+ it rolls over.
+
+ @return The frequency in Hz.
+
+**/
+UINT64
+EFIAPI
+GetPerformanceCounterProperties (
+ OUT UINT64 *StartValue OPTIONAL,
+ OUT UINT64 *EndValue OPTIONAL
+ )
+{
+ if (StartValue != NULL) {
+ *StartValue = BIT2;
+ }
+
+ if (EndValue != NULL) {
+ *EndValue = BIT48 - 1;
+ }
+
+ return CalcConstFreq ();
+}
+
+/**
+ Converts elapsed ticks of performance counter to time in nanoseconds.
+
+ This function converts the elapsed ticks of running performance counter to
+ time value in unit of nanoseconds.
+
+ @param Ticks The number of elapsed ticks of running performance counter.
+
+ @return The elapsed time in nanoseconds.
+
+**/
+UINT64
+EFIAPI
+GetTimeInNanoSecond (
+ IN UINT64 Ticks
+ )
+{
+ UINT64 Frequency;
+ UINT64 NanoSeconds;
+ UINT64 Remainder;
+ INTN Shift;
+
+ Frequency = GetPerformanceCounterProperties (NULL, NULL);
+
+ //
+ // Ticks
+ // Time = --------- x 1,000,000,000
+ // Frequency
+ //
+ NanoSeconds = MultU64x32 (DivU64x64Remainder (Ticks, Frequency, &Remainder), 1000000000u);
+
+ //
+ // Ensure (Remainder * 1,000,000,000) will not overflow 64-bit.
+ // Since 2^29 < 1,000,000,000 = 0x3B9ACA00 < 2^30, Remainder should < 2^(64-30) = 2^34,
+ // i.e. highest bit set in Remainder should <= 33.
+ //
+ Shift = MAX (0, HighBitSet64 (Remainder) - 33);
+ Remainder = RShiftU64 (Remainder, (UINTN)Shift);
+ Frequency = RShiftU64 (Frequency, (UINTN)Shift);
+ NanoSeconds += DivU64x64Remainder (MultU64x32 (Remainder, 1000000000u), Frequency, NULL);
+
+ return NanoSeconds;
+}
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index 074fd77461..8e34a9cd6b 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -205,5 +205,8 @@
UefiCpuPkg/CpuTimerDxeRiscV64/CpuTimerDxeRiscV64.inf
UefiCpuPkg/CpuDxeRiscV64/CpuDxeRiscV64.inf
+[Components.LOONGARCH64]
+ UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
+
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110713): https://edk2.groups.io/g/devel/message/110713
Mute This Topic: https://groups.io/mt/102413862/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 10/30] UefiCpuPkg: Add CPU exception library for LoongArch
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (8 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 09/30] UefiCpuPkg: Add LoongArch64 CPU Timer library Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg Chao Li
` (22 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel; +Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann, Baoqi Zhang
Added a new library named LoongArch64CpuExceptionHandlerLib, and
modified the way LoongArch exceptions are expressed.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
---
MdePkg/Include/Protocol/DebugSupport.h | 76 +++--
.../DxeCpuExceptionHandlerLib.inf | 45 +++
.../DxeCpuExceptionHandlerLib.uni | 15 +
.../DxeExceptionLib.c | 202 +++++++++++
.../ExceptionCommon.c | 170 ++++++++++
.../ExceptionCommon.h | 111 ++++++
.../LoongArch64/ArchExceptionHandler.c | 214 ++++++++++++
.../LoongArch64/ExceptionHandlerAsm.S | 320 ++++++++++++++++++
.../SecPeiCpuExceptionHandlerLib.inf | 45 +++
.../SecPeiCpuExceptionHandlerLib.uni | 15 +
.../SecPeiExceptionLib.c | 90 +++++
UefiCpuPkg/UefiCpuPkg.dec | 6 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
13 files changed, 1279 insertions(+), 32 deletions(-)
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeExceptionLib.c
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.c
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.h
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ArchExceptionHandler.c
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ExceptionHandlerAsm.S
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiExceptionLib.c
diff --git a/MdePkg/Include/Protocol/DebugSupport.h b/MdePkg/Include/Protocol/DebugSupport.h
index 9742663619..ccdddd4828 100644
--- a/MdePkg/Include/Protocol/DebugSupport.h
+++ b/MdePkg/Include/Protocol/DebugSupport.h
@@ -680,33 +680,45 @@ typedef struct {
UINT32 STVAL;
} EFI_SYSTEM_CONTEXT_RISCV64;
-//
-// LoongArch processor exception types.
-//
-#define EXCEPT_LOONGARCH_INT 0
-#define EXCEPT_LOONGARCH_PIL 1
-#define EXCEPT_LOONGARCH_PIS 2
-#define EXCEPT_LOONGARCH_PIF 3
-#define EXCEPT_LOONGARCH_PME 4
-#define EXCEPT_LOONGARCH_PNR 5
-#define EXCEPT_LOONGARCH_PNX 6
-#define EXCEPT_LOONGARCH_PPI 7
-#define EXCEPT_LOONGARCH_ADE 8
-#define EXCEPT_LOONGARCH_ALE 9
-#define EXCEPT_LOONGARCH_BCE 10
-#define EXCEPT_LOONGARCH_SYS 11
-#define EXCEPT_LOONGARCH_BRK 12
-#define EXCEPT_LOONGARCH_INE 13
-#define EXCEPT_LOONGARCH_IPE 14
-#define EXCEPT_LOONGARCH_FPD 15
-#define EXCEPT_LOONGARCH_SXD 16
-#define EXCEPT_LOONGARCH_ASXD 17
-#define EXCEPT_LOONGARCH_FPE 18
-#define EXCEPT_LOONGARCH_TBR 64 // For code only, there is no such type in the ISA spec, the TLB refill is defined for an independent exception.
-
-//
-// LoongArch processor Interrupt types.
-//
+///
+/// LoongArch processor exception types.
+///
+#define EXCEPT_LOONGARCH_ECODE_SHIFT 16
+#define EXCEPT_LOONGARCH_INT (0 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PIL (1 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PIS (2 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PIF (3 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PME (4 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PNR (5 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PNX (6 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_PPI (7 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_ADE (8 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_ALE (9 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_BCE (10 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_SYS (11 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_BRK (12 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_INE (13 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_IPE (14 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_FPD (15 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_SXD (16 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_ASXD (17 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_FPE (18 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_WPE (19 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_BTD (20 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_BTE (21 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_GSPR (22 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_HVC (23 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+#define EXCEPT_LOONGARCH_GCXC (24 << EXCEPT_LOONGARCH_ECODE_SHIFT)
+
+///
+/// For coding convenience, define the maximum valid
+/// LoongArch exception.
+///
+#define MAX_LOONGARCH_EXCEPTION 64
+
+///
+/// LoongArch processor Interrupt types.
+///
#define EXCEPT_LOONGARCH_INT_SIP0 0
#define EXCEPT_LOONGARCH_INT_SIP1 1
#define EXCEPT_LOONGARCH_INT_IP0 2
@@ -721,11 +733,11 @@ typedef struct {
#define EXCEPT_LOONGARCH_INT_TIMER 11
#define EXCEPT_LOONGARCH_INT_IPI 12
-//
-// For coding convenience, define the maximum valid
-// LoongArch interrupt.
-//
-#define MAX_LOONGARCH_INTERRUPT 14
+///
+/// For coding convenience, define the maximum valid
+/// LoongArch interrupt.
+///
+#define MAX_LOONGARCH_INTERRUPT 16
typedef struct {
UINT64 R0;
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
new file mode 100644
index 0000000000..fa38218464
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
@@ -0,0 +1,45 @@
+## @file
+# LoongArch exception library instance for DXE modules.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeCpuExceptionHandlerLib
+ MODULE_UNI_FILE = DxeCpuExceptionHandlerLib.uni
+ FILE_GUID = 23C5D29F-F54B-091B-BD94-027576ED09FA
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = CpuExceptionHandlerLib|DXE_CORE DXE_DRIVER UEFI_APPLICATION
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources.LoongArch64]
+ LoongArch64/ArchExceptionHandler.c
+ LoongArch64/ExceptionHandlerAsm.S | GCC
+
+[Sources.common]
+ ExceptionCommon.h
+ ExceptionCommon.c
+ DxeExceptionLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ CpuLib
+ BaseLib
+ SerialPortLib
+ PrintLib
+ PeCoffGetEntryPointLib
+ SynchronizationLib
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.uni b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.uni
new file mode 100644
index 0000000000..d884387da3
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// CPU Exception Handler library instance for DXE modules.
+//
+// CPU Exception Handler library instance for DXE modules.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU Exception Handler library instance for DXE modules."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU Exception Handler library instance for DXE modules."
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeExceptionLib.c b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeExceptionLib.c
new file mode 100644
index 0000000000..f274f82c51
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeExceptionLib.c
@@ -0,0 +1,202 @@
+/** @file DxeExceptionLib.c
+
+ LoongArch exception library implemenation for DXE modules.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Library/CpuLib.h>
+#include <Library/DebugLib.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+#include <Protocol/DebugSupport.h>
+
+#include "ExceptionCommon.h"
+
+EFI_EXCEPTION_CALLBACK ExternalInterruptHandler[MAX_LOONGARCH_INTERRUPT + 1] = { 0 };
+EFI_EXCEPTION_CALLBACK ExceptionHandler[MAX_LOONGARCH_EXCEPTION + 1] = { 0 };
+
+/**
+ Registers a function to be called from the processor interrupt or exception handler.
+
+ This function registers and enables the handler specified by InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+ handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or exception.
+
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterCpuInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ EFI_EXCEPTION_TYPE ExceptionType;
+
+ ExceptionType = InterruptType & CSR_ESTAT_EXC;
+
+ if (ExceptionType != 0) {
+ //
+ // Exception
+ //
+ if (ExceptionType > EXCEPT_LOONGARCH_FPE) {
+ return EFI_UNSUPPORTED;
+ }
+
+ ExceptionType >>= EXCEPT_LOONGARCH_ECODE_SHIFT;
+
+ if ((InterruptHandler == NULL) && (ExceptionHandler[InterruptType] == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((InterruptHandler != NULL) && (ExceptionHandler[ExceptionType] != NULL)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ ExceptionHandler[ExceptionType] = InterruptHandler;
+ } else {
+ //
+ // Interrupt
+ //
+ if (InterruptType > MAX_LOONGARCH_INTERRUPT) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if ((InterruptHandler == NULL) && (ExternalInterruptHandler[InterruptType] == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((InterruptHandler != NULL) && (ExternalInterruptHandler[InterruptType] != NULL)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ ExternalInterruptHandler[InterruptType] = InterruptHandler;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Common exception handler.
+
+ @param ExceptionType Exception type.
+ @param SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+EFIAPI
+CommonExceptionHandler (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN OUT EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ EFI_EXCEPTION_TYPE InterruptType;
+
+ if (ExceptionType == EXCEPT_LOONGARCH_INT) {
+ //
+ // Interrupt
+ //
+ InterruptType = GetInterruptType (SystemContext);
+ if (InterruptType == 0xFF) {
+ ExceptionType = InterruptType;
+ } else {
+ if ((ExternalInterruptHandler != NULL) && (ExternalInterruptHandler[InterruptType] != NULL)) {
+ ExternalInterruptHandler[InterruptType](InterruptType, SystemContext);
+ return;
+ }
+ }
+ } else if (ExceptionType == EXCEPT_LOONGARCH_FPD) {
+ EnableFloatingPointUnits ();
+ InitializeFloatingPointUnits ();
+ return;
+ } else {
+ //
+ // Exception
+ //
+ ExceptionType >>= EXCEPT_LOONGARCH_ECODE_SHIFT;
+ if ((ExceptionHandler != NULL) && (ExceptionHandler[ExceptionType] != NULL)) {
+ ExceptionHandler[ExceptionType](ExceptionType, SystemContext);
+ return;
+ }
+ }
+
+ //
+ // Only the TLB refill exception use the same entry point as normal exceptions.
+ //
+ if (CsrRead (LOONGARCH_CSR_TLBRERA) & 0x1) {
+ ExceptionType = mExceptionKnownNameNum - 1; // Use only to dump the exception context.
+ }
+
+ DefaultExceptionHandler (ExceptionType, SystemContext);
+}
+
+/**
+ Initializes all CPU exceptions entries and provides the default exception handlers.
+
+ Caller should try to get an array of interrupt and/or exception vectors that are in use and need to
+ persist by EFI_VECTOR_HANDOFF_INFO defined in PI 1.3 specification.
+ If caller cannot get reserved vector list or it does not exists, set VectorInfo to NULL.
+ If VectorInfo is not NULL, the exception vectors will be initialized per vector attribute accordingly.
+
+ @param[in] VectorInfo Pointer to reserved vector list.
+
+ @retval EFI_SUCCESS CPU Exception Entries have been successfully initialized
+ with default exception handlers.
+ @retval EFI_INVALID_PARAMETER VectorInfo includes the invalid content if VectorInfo is not NULL.
+ @retval EFI_UNSUPPORTED This function is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeCpuExceptionHandlers (
+ IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Setup separate stacks for certain exception handlers.
+ If the input Buffer and BufferSize are both NULL, use global variable if possible.
+
+ @param[in] Buffer Point to buffer used to separate exception stack.
+ @param[in, out] BufferSize On input, it indicates the byte size of Buffer.
+ If the size is not enough, the return status will
+ be EFI_BUFFER_TOO_SMALL, and output BufferSize
+ will be the size it needs.
+
+ @retval EFI_SUCCESS The stacks are assigned successfully.
+ @retval EFI_UNSUPPORTED This function is not supported.
+ @retval EFI_BUFFER_TOO_SMALL This BufferSize is too small.
+**/
+EFI_STATUS
+EFIAPI
+InitializeSeparateExceptionStacks (
+ IN VOID *Buffer,
+ IN OUT UINTN *BufferSize
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.c b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.c
new file mode 100644
index 0000000000..aa58a4128a
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.c
@@ -0,0 +1,170 @@
+/** @file DxeExceptionLib.c
+
+ CPU Exception Handler Library common functions.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include "ExceptionCommon.h"
+
+CONST CHAR8 mExceptionReservedStr[] = "Reserved";
+CONST CHAR8 *mExceptionNameStr[] = {
+ "#INT - Interrupt(CSR.ECFG.VS=0)",
+ "#PIL - Page invalid exception for Load option",
+ "#PIS - Page invalid exception for Store operation",
+ "#PIF - Page invalid exception for Fetch operation",
+ "#PME - Page modification exception",
+ "#PNR - Page non-readable exception",
+ "#PNX - Page non-executable exception",
+ "#PPI - Page privilege level illegal exception",
+ "#ADE - Address error exception",
+ "#ALE - Address alignment fault exception",
+ "#BCE - Bound check exception",
+ "#SYS - System call exception",
+ "#BRK - Beeakpoint exception",
+ "#INE - Instruction non-defined exception",
+ "#IPE - Instruction privilege error exception",
+ "#FPD - Floating-point instruction disable exception",
+ "#SXD - 128-bit vector (SIMD instructions) expansion instruction disable exception",
+ "#ASXD - 256-bit vector (Advanced SIMD instructions) expansion instruction disable exception",
+ "#FPE - Floating-Point error exception",
+ "#WPE - WatchPoint Exception for Fetch watchpoint or Memory load/store watchpoint",
+ "#BTD - Binary Translation expansion instruction Disable exception",
+ "#BTE - Binary Translation related exceptions",
+ "#GSPR - Guest Sensitive Privileged Resource exception",
+ "#HVC - HyperVisor Call exception",
+ "#GCXC - Guest CSR Software/Hardware Change exception",
+ "#TBR - TLB refill exception" // !!! NOTICE: Because the TLB refill exception is not instructed in ECODE, so the TLB refill exception must be the last one!
+};
+
+INTN mExceptionKnownNameNum = (sizeof (mExceptionNameStr) / sizeof (CHAR8 *));
+
+/**
+ Get ASCII format string exception name by exception type.
+
+ @param ExceptionType Exception type.
+
+ @return ASCII format string exception name.
+
+**/
+CONST CHAR8 *
+GetExceptionNameStr (
+ IN EFI_EXCEPTION_TYPE ExceptionType
+ )
+{
+ if ((UINTN)ExceptionType < mExceptionKnownNameNum) {
+ return mExceptionNameStr[ExceptionType];
+ } else {
+ return mExceptionReservedStr;
+ }
+}
+
+/**
+ Prints a message to the serial port.
+
+ @param Format Format string for the message to print.
+ @param ... Variable argument list whose contents are accessed
+ based on the format string specified by Format.
+
+**/
+VOID
+EFIAPI
+InternalPrintMessage (
+ IN CONST CHAR8 *Format,
+ ...
+ )
+{
+ CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
+ VA_LIST Marker;
+
+ //
+ // Convert the message to an ASCII String
+ //
+ VA_START (Marker, Format);
+ AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker);
+ VA_END (Marker);
+
+ //
+ // Send the print string to a Serial Port
+ //
+ SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));
+}
+
+/**
+ Find and display image base address and return image base and its entry point.
+
+ @param CurrentEra Current instruction pointer.
+
+**/
+VOID
+DumpModuleImageInfo (
+ IN UINTN CurrentEra
+ )
+{
+ EFI_STATUS Status;
+ UINTN Pe32Data;
+ VOID *PdbPointer;
+ VOID *EntryPoint;
+
+ Pe32Data = PeCoffSearchImageBase (CurrentEra);
+ if (Pe32Data == 0) {
+ InternalPrintMessage ("!!!! Can't find image information. !!!!\n");
+ } else {
+ //
+ // Find Image Base entry point
+ //
+ Status = PeCoffLoaderGetEntryPoint ((VOID *)Pe32Data, &EntryPoint);
+ if (EFI_ERROR (Status)) {
+ EntryPoint = NULL;
+ }
+
+ InternalPrintMessage ("!!!! Find image based on IP(0x%x) ", CurrentEra);
+ PdbPointer = PeCoffLoaderGetPdbPointer ((VOID *)Pe32Data);
+ if (PdbPointer != NULL) {
+ InternalPrintMessage ("%a", PdbPointer);
+ } else {
+ InternalPrintMessage ("(No PDB) ");
+ }
+
+ InternalPrintMessage (
+ " (ImageBase=%016lp, EntryPoint=%016p) !!!!\n",
+ (VOID *)Pe32Data,
+ EntryPoint
+ );
+ }
+}
+
+/**
+ Default exception handler.
+
+ @param ExceptionType Exception type.
+ @param SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+EFIAPI
+DefaultExceptionHandler (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN OUT EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ //
+ // Initialize the serial port before dumping.
+ //
+ SerialPortInitialize ();
+ //
+ // Display ExceptionType, CPU information and Image information
+ //
+ DumpImageAndCpuContent (ExceptionType, SystemContext);
+
+ //
+ // Enter a dead loop.
+ //
+ CpuDeadLoop ();
+}
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.h b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.h
new file mode 100644
index 0000000000..b19144b196
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/ExceptionCommon.h
@@ -0,0 +1,111 @@
+/** @file DxeExceptionLib.h
+
+ Common header file for CPU Exception Handler Library.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef EXCEPTION_COMMON_H_
+#define EXCEPTION_COMMON_H_
+
+#define MAX_DEBUG_MESSAGE_LENGTH 0x100
+
+extern INTN mExceptionKnownNameNum;
+
+/**
+ Get ASCII format string exception name by exception type.
+
+ @param[in] ExceptionType Exception type.
+
+ @return ASCII format string exception name.
+
+**/
+CONST CHAR8 *
+GetExceptionNameStr (
+ IN EFI_EXCEPTION_TYPE ExceptionType
+ );
+
+/**
+ Prints a message to the serial port.
+
+ @param[in] Format Format string for the message to print.
+ @param[in] ... Variable argument list whose contents are accessed
+ based on the format string specified by Format.
+
+**/
+VOID
+EFIAPI
+InternalPrintMessage (
+ IN CONST CHAR8 *Format,
+ ...
+ );
+
+/**
+ Find and display image base address and return image base and its entry point.
+
+ @param[in] CurrentEip Current instruction pointer.
+
+**/
+VOID
+DumpModuleImageInfo (
+ IN UINTN CurrentEip
+ );
+
+/**
+ Default exception handler.
+
+ @param[in] ExceptionType Exception type.
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+EFIAPI
+DefaultExceptionHandler (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN OUT EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+/**
+ Display CPU information.
+
+ @param[in] ExceptionType Exception type.
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+DumpImageAndCpuContent (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+/**
+ Get exception types
+
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+ @return Exception type.
+
+**/
+EFI_EXCEPTION_TYPE
+EFIAPI
+GetExceptionType (
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+/**
+ Get Common interrupt types
+
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+ @return Interrupt type.
+
+**/
+EFI_EXCEPTION_TYPE
+EFIAPI
+GetInterruptType (
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+#endif
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ArchExceptionHandler.c b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ArchExceptionHandler.c
new file mode 100644
index 0000000000..2b2f75aad0
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ArchExceptionHandler.c
@@ -0,0 +1,214 @@
+/** @file ArchExceptionHandler.c
+
+ LoongArch64 CPU Exception Handler.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Library/CpuLib.h>
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include "ExceptionCommon.h"
+
+/**
+ Get Exception Type
+
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+ @return LoongArch64 exception type.
+
+**/
+EFI_EXCEPTION_TYPE
+EFIAPI
+GetExceptionType (
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ EFI_EXCEPTION_TYPE ExceptionType;
+
+ ExceptionType = (SystemContext.SystemContextLoongArch64->ESTAT & CSR_ESTAT_EXC);
+ return ExceptionType;
+}
+
+/**
+ Get Interrupt Type
+
+ @param[in] SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+ @return LoongArch64 intrrupt type.
+
+**/
+EFI_EXCEPTION_TYPE
+EFIAPI
+GetInterruptType (
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ EFI_EXCEPTION_TYPE InterruptType;
+
+ for (InterruptType = 0; InterruptType <= EXCEPT_LOONGARCH_INT_IPI; InterruptType++) {
+ if (SystemContext.SystemContextLoongArch64->ESTAT & (1 << InterruptType)) {
+ //
+ // 0 - EXCEPT_LOONGARCH_INT_SIP0
+ // 1 - EXCEPT_LOONGARCH_INT_SIP1
+ // 2 - EXCEPT_LOONGARCH_INT_IP0
+ // 3 - EXCEPT_LOONGARCH_INT_IP1
+ // 4 - EXCEPT_LOONGARCH_INT_IP2
+ // 5 - EXCEPT_LOONGARCH_INT_IP3
+ // 6 - EXCEPT_LOONGARCH_INT_IP4
+ // 7 - EXCEPT_LOONGARCH_INT_IP5
+ // 8 - EXCEPT_LOONGARCH_INT_IP6
+ // 9 - EXCEPT_LOONGARCH_INT_IP7
+ // 10 - EXCEPT_LOONGARCH_INT_PMC
+ // 11 - EXCEPT_LOONGARCH_INT_TIMER
+ // 12 - EXCEPT_LOONGARCH_INT_IPI
+ // Greater than EXCEPT_LOONGARCH_INI_IPI is currently invalid.
+ //
+ return InterruptType;
+ }
+ }
+
+ //
+ // Invalid IRQ
+ //
+ return 0xFF;
+}
+
+/**
+ Display CPU information.
+
+ @param ExceptionType Exception type.
+ @param SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+EFIAPI
+DumpCpuContext (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ InternalPrintMessage (
+ "\n!!!! LoongArch64 Exception Type - %02x(%a) !!!!\n",
+ ExceptionType,
+ GetExceptionNameStr (ExceptionType)
+ );
+
+ //
+ // Dump TLB refill ERA and BADV
+ //
+ if (ExceptionType == (mExceptionKnownNameNum - 1)) {
+ InternalPrintMessage ("TLB refill ERA 0x%llx\n", (CsrRead (LOONGARCH_CSR_TLBRERA) & (~0x3ULL)));
+ InternalPrintMessage ("TLB refill BADV 0x%llx\n", CsrRead (LOONGARCH_CSR_TLBRBADV));
+ }
+
+ //
+ // Dump the general registers
+ //
+ InternalPrintMessage (
+ "Zero - 0x%016lx, RA - 0x%016lx, TP - 0x%016lx, SP - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R0,
+ SystemContext.SystemContextLoongArch64->R1,
+ SystemContext.SystemContextLoongArch64->R2,
+ SystemContext.SystemContextLoongArch64->R3
+ );
+ InternalPrintMessage (
+ " A0 - 0x%016lx, A1 - 0x%016lx, A2 - 0x%016lx, A3 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R4,
+ SystemContext.SystemContextLoongArch64->R5,
+ SystemContext.SystemContextLoongArch64->R6,
+ SystemContext.SystemContextLoongArch64->R7
+ );
+ InternalPrintMessage (
+ " A4 - 0x%016lx, A5 - 0x%016lx, A6 - 0x%016lx, A7 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R8,
+ SystemContext.SystemContextLoongArch64->R9,
+ SystemContext.SystemContextLoongArch64->R10,
+ SystemContext.SystemContextLoongArch64->R11
+ );
+ InternalPrintMessage (
+ " T0 - 0x%016lx, T1 - 0x%016lx, T2 - 0x%016lx, T3 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R12,
+ SystemContext.SystemContextLoongArch64->R13,
+ SystemContext.SystemContextLoongArch64->R14,
+ SystemContext.SystemContextLoongArch64->R15
+ );
+ InternalPrintMessage (
+ " T4 - 0x%016lx, T5 - 0x%016lx, T6 - 0x%016lx, T7 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R16,
+ SystemContext.SystemContextLoongArch64->R17,
+ SystemContext.SystemContextLoongArch64->R18,
+ SystemContext.SystemContextLoongArch64->R19
+ );
+ InternalPrintMessage (
+ " T8 - 0x%016lx, R21 - 0x%016lx, FP - 0x%016lx, S0 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R20,
+ SystemContext.SystemContextLoongArch64->R21,
+ SystemContext.SystemContextLoongArch64->R22,
+ SystemContext.SystemContextLoongArch64->R23
+ );
+ InternalPrintMessage (
+ " S1 - 0x%016lx, S2 - 0x%016lx, S3 - 0x%016lx, S4 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R24,
+ SystemContext.SystemContextLoongArch64->R25,
+ SystemContext.SystemContextLoongArch64->R26,
+ SystemContext.SystemContextLoongArch64->R27
+ );
+ InternalPrintMessage (
+ " S5 - 0x%016lx, S6 - 0x%016lx, S7 - 0x%016lx, S8 - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->R28,
+ SystemContext.SystemContextLoongArch64->R29,
+ SystemContext.SystemContextLoongArch64->R30,
+ SystemContext.SystemContextLoongArch64->R31
+ );
+ InternalPrintMessage ("\n");
+
+ //
+ // Dump the CSR registers
+ //
+ InternalPrintMessage (
+ "CRMD - 0x%016lx, PRMD - 0x%016lx, EUEN - 0x%016lx, MISC - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->CRMD,
+ SystemContext.SystemContextLoongArch64->PRMD,
+ SystemContext.SystemContextLoongArch64->EUEN,
+ SystemContext.SystemContextLoongArch64->MISC
+ );
+ InternalPrintMessage (
+ "ECFG - 0x%016lx, ESTAT - 0x%016lx, ERA - 0x%016lx, BADV - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->ECFG,
+ SystemContext.SystemContextLoongArch64->ESTAT,
+ SystemContext.SystemContextLoongArch64->ERA,
+ SystemContext.SystemContextLoongArch64->BADV
+ );
+ InternalPrintMessage (
+ "BADI - 0x%016lx\n",
+ SystemContext.SystemContextLoongArch64->BADI
+ );
+}
+
+/**
+ Display CPU information.
+
+ @param ExceptionType Exception type.
+ @param SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+DumpImageAndCpuContent (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ DumpCpuContext (ExceptionType, SystemContext);
+
+ if (ExceptionType == (mExceptionKnownNameNum - 1)) {
+ //
+ // Dump TLB refill image info
+ //
+ DumpModuleImageInfo ((CsrRead (LOONGARCH_CSR_TLBRERA) & (~0x3ULL)));
+ } else {
+ DumpModuleImageInfo (SystemContext.SystemContextLoongArch64->ERA);
+ }
+}
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ExceptionHandlerAsm.S b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ExceptionHandlerAsm.S
new file mode 100644
index 0000000000..88a5f696a7
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/LoongArch64/ExceptionHandlerAsm.S
@@ -0,0 +1,320 @@
+#------------------------------------------------------------------------------
+#
+# LoongArch64 ASM exception handler
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+#include <Library/CpuLib.h>
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+#define RSIZE 8 // 64 bit mode register size
+#define GP_REG_CONTEXT_SIZE 32 * RSIZE // General-purpose registers size
+#define FP_REG_CONTEXT_SIZE 34 * RSIZE // Floating-point registers size
+#define CSR_REG_CONTEXT_SIZE 9 * RSIZE // CSR registers size
+
+ASM_GLOBAL ASM_PFX(ExceptionEntry)
+ASM_GLOBAL ASM_PFX(ExceptionEntryStart)
+ASM_GLOBAL ASM_PFX(ExceptionEntryEnd)
+
+ASM_PFX(ExceptionEntry):
+ move $s0, $a0
+ bl GetExceptionType // Exception type stored in register a0
+ move $a1, $s0 // SystemContxt
+ bl CommonExceptionHandler
+
+PopContext:
+ //
+ // Not sure if interrupts are turned on during the exception handler, anyway disable interrupts here.
+ // It will be turned on when the instruction 'ertn' is executed.
+ //
+ bl DisableInterrupts
+
+ bl GetExceptionType // Get current exception type, and stored in register a0
+
+ // Check whether the FPE is changed during interrupt handler, if ture restore it.
+ ld.d $t1, $sp, (LOONGARCH_CSR_EUEN * RSIZE + GP_REG_CONTEXT_SIZE)
+ csrrd $t0, LOONGARCH_CSR_EUEN // Current EUEN
+ andi $t0, $t0, CSR_EUEN_FPEN
+ andi $t1, $t1, CSR_EUEN_FPEN
+ li.d $t2, EXCEPT_LOONGARCH_INT
+ bne $a0, $t2, PopRegs
+ beq $t0, $t1, PopRegs
+ beqz $t1, CloseFP
+ bl EnableFloatingPointUnits
+ b PopRegs
+
+CloseFP:
+ bl DisableFloatingPointUnits
+
+PopRegs:
+ //
+ // Pop CSR reigsters
+ //
+ addi.d $sp, $sp, GP_REG_CONTEXT_SIZE
+
+ ld.d $t0, $sp, LOONGARCH_CSR_CRMD * RSIZE
+ csrwr $t0, LOONGARCH_CSR_CRMD
+ ld.d $t0, $sp, LOONGARCH_CSR_PRMD * RSIZE
+ csrwr $t0, LOONGARCH_CSR_PRMD
+ ld.d $t0, $sp, LOONGARCH_CSR_ECFG * RSIZE
+ csrwr $t0, LOONGARCH_CSR_ECFG
+ ld.d $t0, $sp, LOONGARCH_CSR_ERA * RSIZE
+ csrwr $t0, LOONGARCH_CSR_ERA
+
+ addi.d $sp, $sp, CSR_REG_CONTEXT_SIZE // Fource change the stack pointer befor pop the FP registers.
+
+ beqz $t1, PopGP // If the FPE not set, only pop the GP registers.
+
+ //
+ // Pop FP registers
+ //
+ fld.d $fa0, $sp, 0 * RSIZE
+ fld.d $fa1, $sp, 1 * RSIZE
+ fld.d $fa2, $sp, 2 * RSIZE
+ fld.d $fa3, $sp, 3 * RSIZE
+ fld.d $fa4, $sp, 4 * RSIZE
+ fld.d $fa5, $sp, 5 * RSIZE
+ fld.d $fa6, $sp, 6 * RSIZE
+ fld.d $fa7, $sp, 7 * RSIZE
+ fld.d $ft0, $sp, 8 * RSIZE
+ fld.d $ft1, $sp, 9 * RSIZE
+ fld.d $ft2, $sp, 10 * RSIZE
+ fld.d $ft3, $sp, 11 * RSIZE
+ fld.d $ft4, $sp, 12 * RSIZE
+ fld.d $ft5, $sp, 13 * RSIZE
+ fld.d $ft6, $sp, 14 * RSIZE
+ fld.d $ft7, $sp, 15 * RSIZE
+ fld.d $ft8, $sp, 16 * RSIZE
+ fld.d $ft9, $sp, 17 * RSIZE
+ fld.d $ft10, $sp, 18 * RSIZE
+ fld.d $ft11, $sp, 19 * RSIZE
+ fld.d $ft12, $sp, 20 * RSIZE
+ fld.d $ft13, $sp, 21 * RSIZE
+ fld.d $ft14, $sp, 22 * RSIZE
+ fld.d $ft15, $sp, 23 * RSIZE
+ fld.d $fs0, $sp, 24 * RSIZE
+ fld.d $fs1, $sp, 25 * RSIZE
+ fld.d $fs2, $sp, 26 * RSIZE
+ fld.d $fs3, $sp, 27 * RSIZE
+ fld.d $fs4, $sp, 28 * RSIZE
+ fld.d $fs5, $sp, 29 * RSIZE
+ fld.d $fs6, $sp, 30 * RSIZE
+ fld.d $fs7, $sp, 31 * RSIZE
+
+ ld.d $t0, $sp, 32 * RSIZE
+ movgr2fcsr $r0, $t0 // Pop the fcsr0 register.
+
+ //
+ // Pop the fcc0-fcc7 registers.
+ //
+ ld.d $t0, $sp, 33 * RSIZE
+ bstrpick.d $t1, $t0, 7, 0
+ movgr2cf $fcc0, $t1
+ bstrpick.d $t1, $t0, 15, 8
+ movgr2cf $fcc1, $t1
+ bstrpick.d $t1, $t0, 23, 16
+ movgr2cf $fcc2, $t1
+ bstrpick.d $t1, $t0, 31, 24
+ movgr2cf $fcc3, $t1
+ bstrpick.d $t1, $t0, 39, 32
+ movgr2cf $fcc4, $t1
+ bstrpick.d $t1, $t0, 47, 40
+ movgr2cf $fcc5, $t1
+ bstrpick.d $t1, $t0, 55, 48
+ movgr2cf $fcc6, $t1
+ bstrpick.d $t1, $t0, 63, 56
+ movgr2cf $fcc7, $t1
+
+PopGP:
+ //
+ // Pop GP registers
+ //
+ addi.d $sp, $sp, -(GP_REG_CONTEXT_SIZE + CSR_REG_CONTEXT_SIZE)
+ ld.d $ra, $sp, 1 * RSIZE
+ ld.d $tp, $sp, 2 * RSIZE
+ ld.d $a0, $sp, 4 * RSIZE
+ ld.d $a1, $sp, 5 * RSIZE
+ ld.d $a2, $sp, 6 * RSIZE
+ ld.d $a3, $sp, 7 * RSIZE
+ ld.d $a4, $sp, 8 * RSIZE
+ ld.d $a5, $sp, 9 * RSIZE
+ ld.d $a6, $sp, 10 * RSIZE
+ ld.d $a7, $sp, 11 * RSIZE
+ ld.d $t0, $sp, 12 * RSIZE
+ ld.d $t1, $sp, 13 * RSIZE
+ ld.d $t2, $sp, 14 * RSIZE
+ ld.d $t3, $sp, 15 * RSIZE
+ ld.d $t4, $sp, 16 * RSIZE
+ ld.d $t5, $sp, 17 * RSIZE
+ ld.d $t6, $sp, 18 * RSIZE
+ ld.d $t7, $sp, 19 * RSIZE
+ ld.d $t8, $sp, 20 * RSIZE
+ ld.d $r21, $sp, 21 * RSIZE
+ ld.d $fp, $sp, 22 * RSIZE
+ ld.d $s0, $sp, 23 * RSIZE
+ ld.d $s1, $sp, 24 * RSIZE
+ ld.d $s2, $sp, 25 * RSIZE
+ ld.d $s3, $sp, 26 * RSIZE
+ ld.d $s4, $sp, 27 * RSIZE
+ ld.d $s5, $sp, 28 * RSIZE
+ ld.d $s6, $sp, 29 * RSIZE
+ ld.d $s7, $sp, 30 * RSIZE
+ ld.d $s8, $sp, 31 * RSIZE
+ ld.d $sp, $sp, 3 * RSIZE
+
+ ertn // Returen from exception.
+//
+// End of ExceptionEntry
+//
+
+ASM_PFX(ExceptionEntryStart):
+ //
+ // Store the old stack pointer in preparation for pushing the exception context onto the new stack.
+ //
+ csrwr $sp, LOONGARCH_CSR_KS0
+
+ csrrd $sp, LOONGARCH_CSR_KS0
+
+ //
+ // Push GP registers
+ //
+ addi.d $sp, $sp, -(GP_REG_CONTEXT_SIZE + FP_REG_CONTEXT_SIZE + CSR_REG_CONTEXT_SIZE)
+ st.d $zero, $sp, 0 * RSIZE
+ st.d $ra, $sp, 1 * RSIZE
+ st.d $tp, $sp, 2 * RSIZE
+ st.d $a0, $sp, 4 * RSIZE
+ st.d $a1, $sp, 5 * RSIZE
+ st.d $a2, $sp, 6 * RSIZE
+ st.d $a3, $sp, 7 * RSIZE
+ st.d $a4, $sp, 8 * RSIZE
+ st.d $a5, $sp, 9 * RSIZE
+ st.d $a6, $sp, 10 * RSIZE
+ st.d $a7, $sp, 11 * RSIZE
+ st.d $t0, $sp, 12 * RSIZE
+ st.d $t1, $sp, 13 * RSIZE
+ st.d $t2, $sp, 14 * RSIZE
+ st.d $t3, $sp, 15 * RSIZE
+ st.d $t4, $sp, 16 * RSIZE
+ st.d $t5, $sp, 17 * RSIZE
+ st.d $t6, $sp, 18 * RSIZE
+ st.d $t7, $sp, 19 * RSIZE
+ st.d $t8, $sp, 20 * RSIZE
+ st.d $r21, $sp, 21 * RSIZE
+ st.d $fp, $sp, 22 * RSIZE
+ st.d $s0, $sp, 23 * RSIZE
+ st.d $s1, $sp, 24 * RSIZE
+ st.d $s2, $sp, 25 * RSIZE
+ st.d $s3, $sp, 26 * RSIZE
+ st.d $s4, $sp, 27 * RSIZE
+ st.d $s5, $sp, 28 * RSIZE
+ st.d $s6, $sp, 29 * RSIZE
+ st.d $s7, $sp, 30 * RSIZE
+ st.d $s8, $sp, 31 * RSIZE
+ csrrd $t0, LOONGARCH_CSR_KS0 // Read the old stack pointer.
+ st.d $t0, $sp, 3 * RSIZE
+
+ //
+ // Push CSR registers
+ //
+ addi.d $sp, $sp, GP_REG_CONTEXT_SIZE
+
+ csrrd $t0, LOONGARCH_CSR_CRMD
+ st.d $t0, $sp, LOONGARCH_CSR_CRMD * RSIZE
+ csrrd $t0, LOONGARCH_CSR_PRMD
+ st.d $t0, $sp, LOONGARCH_CSR_PRMD * RSIZE
+ csrrd $t0, LOONGARCH_CSR_EUEN
+ st.d $t0, $sp, LOONGARCH_CSR_EUEN * RSIZE
+ csrrd $t0, LOONGARCH_CSR_MISC
+ st.d $t0, $sp, LOONGARCH_CSR_MISC * RSIZE
+ csrrd $t0, LOONGARCH_CSR_ECFG
+ st.d $t0, $sp, LOONGARCH_CSR_ECFG * RSIZE
+ csrrd $t0, LOONGARCH_CSR_ESTAT
+ st.d $t0, $sp, LOONGARCH_CSR_ESTAT * RSIZE
+ csrrd $t0, LOONGARCH_CSR_ERA
+ st.d $t0, $sp, LOONGARCH_CSR_ERA * RSIZE
+ csrrd $t0, LOONGARCH_CSR_BADV
+ st.d $t0, $sp, LOONGARCH_CSR_BADV * RSIZE
+ csrrd $t0, LOONGARCH_CSR_BADI
+ st.d $t0, $sp, LOONGARCH_CSR_BADI * RSIZE
+
+ //
+ // Push FP registers
+ //
+ addi.d $sp, $sp, CSR_REG_CONTEXT_SIZE
+
+ csrrd $t0, LOONGARCH_CSR_EUEN
+ andi $t0, $t0, CSR_EUEN_FPEN
+ beqz $t0, PushRegDone
+
+ fst.d $fa0, $sp, 0 * RSIZE
+ fst.d $fa1, $sp, 1 * RSIZE
+ fst.d $fa2, $sp, 2 * RSIZE
+ fst.d $fa3, $sp, 3 * RSIZE
+ fst.d $fa4, $sp, 4 * RSIZE
+ fst.d $fa5, $sp, 5 * RSIZE
+ fst.d $fa6, $sp, 6 * RSIZE
+ fst.d $fa7, $sp, 7 * RSIZE
+ fst.d $ft0, $sp, 8 * RSIZE
+ fst.d $ft1, $sp, 9 * RSIZE
+ fst.d $ft2, $sp, 10 * RSIZE
+ fst.d $ft3, $sp, 11 * RSIZE
+ fst.d $ft4, $sp, 12 * RSIZE
+ fst.d $ft5, $sp, 13 * RSIZE
+ fst.d $ft6, $sp, 14 * RSIZE
+ fst.d $ft7, $sp, 15 * RSIZE
+ fst.d $ft8, $sp, 16 * RSIZE
+ fst.d $ft9, $sp, 17 * RSIZE
+ fst.d $ft10, $sp, 18 * RSIZE
+ fst.d $ft11, $sp, 19 * RSIZE
+ fst.d $ft12, $sp, 20 * RSIZE
+ fst.d $ft13, $sp, 21 * RSIZE
+ fst.d $ft14, $sp, 22 * RSIZE
+ fst.d $ft15, $sp, 23 * RSIZE
+ fst.d $fs0, $sp, 24 * RSIZE
+ fst.d $fs1, $sp, 25 * RSIZE
+ fst.d $fs2, $sp, 26 * RSIZE
+ fst.d $fs3, $sp, 27 * RSIZE
+ fst.d $fs4, $sp, 28 * RSIZE
+ fst.d $fs5, $sp, 29 * RSIZE
+ fst.d $fs6, $sp, 30 * RSIZE
+ fst.d $fs7, $sp, 31 * RSIZE
+
+ movfcsr2gr $t3, $r0
+ st.d $t3, $sp, 32 * RSIZE // Push the FCSR0 register.
+
+ //
+ // Push the fcc0-fcc7 registers.
+ //
+ movcf2gr $t3, $fcc0
+ or $t2, $t3, $zero
+ movcf2gr $t3, $fcc1
+ bstrins.d $t2, $t3, 0xf, 0x8
+ movcf2gr $t3, $fcc2
+ bstrins.d $t2, $t3, 0x17, 0x10
+ movcf2gr $t3, $fcc3
+ bstrins.d $t2, $t3, 0x1f, 0x18
+ movcf2gr $t3, $fcc4
+ bstrins.d $t2, $t3, 0x27, 0x20
+ movcf2gr $t3, $fcc5
+ bstrins.d $t2, $t3, 0x2f, 0x28
+ movcf2gr $t3, $fcc6
+ bstrins.d $t2, $t3, 0x37, 0x30
+ movcf2gr $t3, $fcc7
+ bstrins.d $t2, $t3, 0x3f, 0x38
+ st.d $t2, $sp, 33 * RSIZE
+ //
+ // Push exception context down
+ //
+
+PushRegDone:
+ addi.d $sp, $sp, -(GP_REG_CONTEXT_SIZE + CSR_REG_CONTEXT_SIZE)
+ move $a0, $sp
+ la.abs $ra, ExceptionEntry
+ jirl $zero, $ra, 0
+ASM_PFX(ExceptionEntryEnd):
+.end
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
new file mode 100644
index 0000000000..456354ff04
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
@@ -0,0 +1,45 @@
+## @file
+# LoongArch exception library instance for PEI and SEC modules.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecPeiCpuExceptionHandlerLib
+ MODULE_UNI_FILE = SecPeiCpuExceptionHandlerLib.uni
+ FILE_GUID = 0D69E6CD-1423-F118-C4EF-7AA439BC3E3B
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = CpuExceptionHandlerLib|SEC PEI_CORE PEIM
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources.LoongArch64]
+ LoongArch64/ArchExceptionHandler.c
+ LoongArch64/ExceptionHandlerAsm.S | GCC
+
+[Sources.common]
+ ExceptionCommon.h
+ ExceptionCommon.c
+ SecPeiExceptionLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ CpuLib
+ BaseLib
+ SerialPortLib
+ PrintLib
+ PeCoffGetEntryPointLib
+ SynchronizationLib
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.uni b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.uni
new file mode 100644
index 0000000000..81fd606278
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// CPU Exception Handler library instance for SEC/PEI modules.
+//
+// CPU Exception Handler library instance for SEC/PEI modules.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU Exception Handler library instance for SEC/PEI modules."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU Exception Handler library instance for SEC/PEI modules."
diff --git a/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiExceptionLib.c b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiExceptionLib.c
new file mode 100644
index 0000000000..c140450d5b
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiExceptionLib.c
@@ -0,0 +1,90 @@
+/** @file SecPeiExceptionLib.c
+
+ LoongArch exception library implemenation for PEI and SEC modules.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Library/CpuLib.h>
+#include <Library/DebugLib.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Library/BaseLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+#include <Protocol/DebugSupport.h>
+
+#include "ExceptionCommon.h"
+
+/**
+ Registers a function to be called from the processor interrupt or exception handler.
+
+ Always return EFI_UNSUPPORTED in the SEC exception initialization module.
+
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterCpuInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Common exception handler.
+
+ @param ExceptionType Exception type.
+ @param SystemContext Pointer to EFI_SYSTEM_CONTEXT.
+
+**/
+VOID
+EFIAPI
+CommonExceptionHandler (
+ IN EFI_EXCEPTION_TYPE ExceptionType,
+ IN OUT EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ //
+ // APs may wake up by IPI IRQ during the SEC or PEI phase, clear the IPI interrupt and return.
+ //
+ if (GetInterruptType (SystemContext) == EXCEPT_LOONGARCH_INT_IPI) {
+ DisableLocalInterrupts (1 << EXCEPT_LOONGARCH_INT_IPI);
+ IoCsrWrite32 (LOONGARCH_IOCSR_IPI_CLEAR, IoCsrRead32 (LOONGARCH_IOCSR_IPI_STATUS));
+ return;
+ } else {
+ ExceptionType >>= EXCEPT_LOONGARCH_ECODE_SHIFT;
+ DefaultExceptionHandler (ExceptionType, SystemContext);
+ }
+}
+
+/**
+ Initializes all CPU exceptions entries and provides the default exception handlers.
+
+ Always return EFI_SUCCESS in the SEC exception initialization module.
+
+ @param[in] VectorInfo Pointer to reserved vector list.
+
+ @retval EFI_SUCCESS CPU Exception Entries have been successfully initialized
+ with default exception handlers.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeCpuExceptionHandlers (
+ IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 0b5431dbf7..154b1d06fe 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -3,6 +3,7 @@
#
# Copyright (c) 2007 - 2023, Intel Corporation. All rights reserved.<BR>
# Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.<BR>
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -404,6 +405,11 @@
# 10 - 57bit mode.
gUefiCpuPkgTokenSpaceGuid.PcdCpuRiscVMmuMaxSatpMode|10|UINT32|0x60000021
+[PcdsFixedAtBuild.LoongArch64, PcdsPatchableInModule.LoongArch64, PcdsDynamic.LoongArch64, PcdsDynamicEx.LoongArch64]
+ ## Contains the pointer to a CPU exception vector base address.
+ # @Prompt The pointer to a CPU exception vector base address.
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress|0x0|UINT64|0x62640000
+
[PcdsDynamic, PcdsDynamicEx]
## Contains the pointer to a CPU S3 data buffer of structure ACPI_CPU_DATA.
# @Prompt The pointer to a CPU S3 data buffer.
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index 8e34a9cd6b..872f20fc36 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -207,6 +207,8 @@
[Components.LOONGARCH64]
UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
+ UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
+ UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110714): https://edk2.groups.io/g/devel/message/110714
Mute This Topic: https://groups.io/mt/102413865/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (9 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 10/30] UefiCpuPkg: Add CPU exception library for LoongArch Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-09 1:17 ` Andrei Warkentin
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 12/30] UefiCpuPkg: Add LoongArch64CpuMmuLib " Chao Li
` (21 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel
Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann, Leif Lindholm,
Ard Biesheuvel, Sami Mujawar, Sunil V L, Andrei Warkentin
Add a new header file CpuMmuLib.h, whitch is referenced from
ArmPkg/Include/Library/ArmMmuLib.h. Currently, only support for
LoongArch64 is added, and more architectures can be accommodated in the
future.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
UefiCpuPkg/Include/Library/CpuMmuLib.h | 194 +++++++++++++++++++++++++
UefiCpuPkg/UefiCpuPkg.dec | 4 +
2 files changed, 198 insertions(+)
create mode 100644 UefiCpuPkg/Include/Library/CpuMmuLib.h
diff --git a/UefiCpuPkg/Include/Library/CpuMmuLib.h b/UefiCpuPkg/Include/Library/CpuMmuLib.h
new file mode 100644
index 0000000000..8f524d31d4
--- /dev/null
+++ b/UefiCpuPkg/Include/Library/CpuMmuLib.h
@@ -0,0 +1,194 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef CPU_MMU_LIB_H_
+#define CPU_MMU_LIB_H_
+
+#include <Uefi/UefiBaseType.h>
+
+#ifdef MDE_CPU_LOONGARCH64
+
+/* Page table property definitions */
+#define PAGE_VALID_SHIFT 0
+#define PAGE_DIRTY_SHIFT 1
+#define PAGE_PLV_SHIFT 2 // 2~3, two bits
+#define CACHE_SHIFT 4 // 4~5, two bits
+#define PAGE_GLOBAL_SHIFT 6
+#define PAGE_HUGE_SHIFT 6 // HUGE is a PMD bit
+
+#define PAGE_HGLOBAL_SHIFT 12 // HGlobal is a PMD bit
+#define PAGE_PFN_SHIFT 12
+#define PAGE_PFN_END_SHIFT 48
+#define PAGE_NO_READ_SHIFT 61
+#define PAGE_NO_EXEC_SHIFT 62
+#define PAGE_RPLV_SHIFT 63
+
+/* Used by TLB hardware (placed in EntryLo*) */
+#define PAGE_VALID ((UINTN)(1) << PAGE_VALID_SHIFT)
+#define PAGE_DIRTY ((UINTN)(1) << PAGE_DIRTY_SHIFT)
+#define PAGE_PLV ((UINTN)(3) << PAGE_PLV_SHIFT)
+#define PAGE_GLOBAL ((UINTN)(1) << PAGE_GLOBAL_SHIFT)
+#define PAGE_HUGE ((UINTN)(1) << PAGE_HUGE_SHIFT)
+#define PAGE_HGLOBAL ((UINTN)(1) << PAGE_HGLOBAL_SHIFT)
+#define PAGE_NO_READ ((UINTN)(1) << PAGE_NO_READ_SHIFT)
+#define PAGE_NO_EXEC ((UINTN)(1) << PAGE_NO_EXEC_SHIFT)
+#define PAGE_RPLV ((UINTN)(1) << PAGE_RPLV_SHIFT)
+#define CACHE_MASK ((UINTN)(3) << CACHE_SHIFT)
+#define PFN_SHIFT (EFI_PAGE_SHIFT - 12 + PAGE_PFN_SHIFT)
+
+#define PLV_KERNEL 0
+#define PLV_USER 3
+
+#define PAGE_USER (PLV_USER << PAGE_PLV_SHIFT)
+#define PAGE_KERNEL (PLV_KERN << PAGE_PLV_SHIFT)
+
+#define CACHE_SUC (0 << CACHE_SHIFT) // Strong-ordered UnCached
+#define CACHE_CC (1 << CACHE_SHIFT) // Coherent Cached
+#define CACHE_WUC (2 << CACHE_SHIFT) // Weak-ordered UnCached
+
+#define EFI_MEMORY_CACHETYPE_MASK (EFI_MEMORY_UC | \
+ EFI_MEMORY_WC | \
+ EFI_MEMORY_WT | \
+ EFI_MEMORY_WB | \
+ EFI_MEMORY_UCE \
+ )
+#endif
+
+typedef struct {
+ EFI_PHYSICAL_ADDRESS PhysicalBase;
+ EFI_VIRTUAL_ADDRESS VirtualBase;
+ UINTN Length;
+ UINTN Attributes;
+} MEMORY_REGION_DESCRIPTOR;
+
+/**
+ Converts EFI Attributes to corresponding architecture Attributes.
+
+ @param[in] EfiAttributes Efi Attributes.
+
+ @retval Corresponding architecture attributes.
+**/
+UINTN
+EfiAttributeConverse (
+ IN UINTN EfiAttributes
+ );
+
+/**
+ Finds the length and memory properties of the memory region corresponding to the specified base address.
+
+ @param[in] BaseAddress To find the base address of the memory region.
+ @param[in] EndAddress To find the end address of the memory region.
+ @param[out] RegionLength The length of the memory region found.
+ @param[out] RegionAttributes Properties of the memory region found.
+
+ @retval EFI_SUCCESS The corresponding memory area was successfully found
+ EFI_NOT_FOUND No memory area found
+**/
+EFI_STATUS
+GetMemoryRegionAttribute (
+ IN UINTN BaseAddress,
+ IN UINTN EndAddress,
+ OUT UINTN *RegionLength,
+ OUT UINTN *RegionAttributes
+ );
+
+/**
+ Sets the Attributes of the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to set the Attributes.
+ @param[in] Length The length of the memory region to set the Attributes.
+ @param[in] Attributes The Attributes to be set.
+
+ @retval EFI_SUCCESS The Attributes was set successfully
+**/
+EFI_STATUS
+SetMemoryAttributes (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINTN Length,
+ IN UINTN Attributes
+ );
+
+/**
+ Sets the non-executable Attributes for the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to set the Attributes.
+ @param[in] Length The length of the memory region to set the Attributes.
+
+ @retval EFI_SUCCESS The Attributes was set successfully
+**/
+EFI_STATUS
+SetMemoryRegionNoExec (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINTN Length
+ );
+
+/**
+ Clears the non-executable Attributes for the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to clear the Attributes.
+ @param[in] Length The length of the memory region to clear the Attributes.
+
+ @retval EFI_SUCCESS The Attributes was clear successfully
+**/
+EFI_STATUS
+EFIAPI
+ClearMemoryRegionNoExec (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ );
+
+/**
+ Sets the read-only Attributes for the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to set the Attributes.
+ @param[in] Length The length of the memory region to set the Attributes.
+
+ @retval EFI_SUCCESS The Attributes was set successfully
+**/
+EFI_STATUS
+EFIAPI
+SetMemoryRegionReadOnly (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ );
+
+/**
+ Clears the read-only Attributes for the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to clear the Attributes.
+ @param[in] Length The length of the memory region to clear the Attributes.
+
+ @retval EFI_SUCCESS The Attributes was clear successfully
+**/
+EFI_STATUS
+EFIAPI
+ClearMemoryRegionReadOnly (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ );
+
+/**
+ Create a page table and initialize the memory management unit(MMU).
+
+ @param[in] MemoryTable A pointer to a memory ragion table.
+ @param[out] TranslationTableBase A pointer to a translation table base address.
+ @param[in out] TranslationTableSize A pointer to a translation table base size.
+
+ @retval EFI_SUCCESS Configure MMU successfully.
+ EFI_INVALID_PARAMETER MemoryTable is NULL.
+ EFI_UNSUPPORTED Out of memory space or size not aligned.
+**/
+EFI_STATUS
+EFIAPI
+ConfigureMemoryManagementUint (
+ IN MEMORY_REGION_DESCRIPTOR *MemoryTable,
+ OUT VOID **TranslationTableBase OPTIONAL,
+ IN OUT UINTN *TranslationTableSize OPTIONAL
+ );
+
+#endif // CPU_MMU_LIB_H_
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 154b1d06fe..150beae981 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -62,6 +62,10 @@
## @libraryclass Provides function for manipulating x86 paging structures.
CpuPageTableLib|Include/Library/CpuPageTableLib.h
+[LibraryClasses.LoongArch64]
+ ## @libraryclass Provides macros and functions for the memory management unit.
+ CpuMmuLib|Include/Library/CpuMmuLib.h
+
## @libraryclass Provides functions for manipulating smram savestate registers.
MmSaveStateLib|Include/Library/MmSaveStateLib.h
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110715): https://edk2.groups.io/g/devel/message/110715
Mute This Topic: https://groups.io/mt/102413866/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg Chao Li
@ 2023-11-09 1:17 ` Andrei Warkentin
2023-11-14 2:00 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Andrei Warkentin @ 2023-11-09 1:17 UTC (permalink / raw)
To: Chao Li, devel@edk2.groups.io
Cc: Dong, Eric, Ni, Ray, Kumar, Rahul R, Gerd Hoffmann, Leif Lindholm,
Ard Biesheuvel, Sami Mujawar, Sunil V L
Hi Chao,
I see that you're adding a header, CpuMmuLib.h, but this header is not generic - it includes a bunch of Loongson arch-specific "stuff".
I agree in principle that there's room for a generic CpuMmuLib, and I don't think you ought to be on the hook to refactor ArmMmuLib, but I suggest moving
the architecture-specific PTE #defines into MdePkg/Include similar to ./MdePkg/Include/Register/RiscV64. (it would, though, be nice to at least record the idea of moving ArmMmuLib to CpuMmuLib.... raise a BZ for that or something!)
This will avoid the #ifdef MDE_CPU_LOONGARCH64 inside a generic Library header.
A
> -----Original Message-----
> From: Chao Li <lichao@loongson.cn>
> Sent: Sunday, November 5, 2023 9:28 PM
> To: devel@edk2.groups.io
> Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>; Kumar,
> Rahul R <rahul.r.kumar@intel.com>; Gerd Hoffmann <kraxel@redhat.com>;
> Leif Lindholm <quic_llindhol@quicinc.com>; Ard Biesheuvel
> <ardb+tianocore@kernel.org>; Sami Mujawar <sami.mujawar@arm.com>;
> Sunil V L <sunilvl@ventanamicro.com>; Warkentin, Andrei
> <andrei.warkentin@intel.com>
> Subject: [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg
>
> Add a new header file CpuMmuLib.h, whitch is referenced from
> ArmPkg/Include/Library/ArmMmuLib.h. Currently, only support for
> LoongArch64 is added, and more architectures can be accommodated in the
> future.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Rahul Kumar <rahul1.kumar@intel.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Sami Mujawar <sami.mujawar@arm.com>
> Cc: Sunil V L <sunilvl@ventanamicro.com>
> Cc: Andrei Warkentin <andrei.warkentin@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> UefiCpuPkg/Include/Library/CpuMmuLib.h | 194
> +++++++++++++++++++++++++
> UefiCpuPkg/UefiCpuPkg.dec | 4 +
> 2 files changed, 198 insertions(+)
> create mode 100644 UefiCpuPkg/Include/Library/CpuMmuLib.h
>
> diff --git a/UefiCpuPkg/Include/Library/CpuMmuLib.h
> b/UefiCpuPkg/Include/Library/CpuMmuLib.h
> new file mode 100644
> index 0000000000..8f524d31d4
> --- /dev/null
> +++ b/UefiCpuPkg/Include/Library/CpuMmuLib.h
> @@ -0,0 +1,194 @@
> +/** @file
> +
> + Copyright (c) 2023 Loongson Technology Corporation Limited. All
> + rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef CPU_MMU_LIB_H_
> +#define CPU_MMU_LIB_H_
> +
> +#include <Uefi/UefiBaseType.h>
> +
> +#ifdef MDE_CPU_LOONGARCH64
> +
> +/* Page table property definitions */
> +#define PAGE_VALID_SHIFT 0
> +#define PAGE_DIRTY_SHIFT 1
> +#define PAGE_PLV_SHIFT 2 // 2~3, two bits
> +#define CACHE_SHIFT 4 // 4~5, two bits
> +#define PAGE_GLOBAL_SHIFT 6
> +#define PAGE_HUGE_SHIFT 6 // HUGE is a PMD bit
> +
> +#define PAGE_HGLOBAL_SHIFT 12 // HGlobal is a PMD bit
> +#define PAGE_PFN_SHIFT 12
> +#define PAGE_PFN_END_SHIFT 48
> +#define PAGE_NO_READ_SHIFT 61
> +#define PAGE_NO_EXEC_SHIFT 62
> +#define PAGE_RPLV_SHIFT 63
> +
> +/* Used by TLB hardware (placed in EntryLo*) */
> +#define PAGE_VALID ((UINTN)(1) << PAGE_VALID_SHIFT)
> +#define PAGE_DIRTY ((UINTN)(1) << PAGE_DIRTY_SHIFT)
> +#define PAGE_PLV ((UINTN)(3) << PAGE_PLV_SHIFT)
> +#define PAGE_GLOBAL ((UINTN)(1) << PAGE_GLOBAL_SHIFT)
> +#define PAGE_HUGE ((UINTN)(1) << PAGE_HUGE_SHIFT)
> +#define PAGE_HGLOBAL ((UINTN)(1) << PAGE_HGLOBAL_SHIFT) #define
> +PAGE_NO_READ ((UINTN)(1) << PAGE_NO_READ_SHIFT) #define
> PAGE_NO_EXEC
> +((UINTN)(1) << PAGE_NO_EXEC_SHIFT)
> +#define PAGE_RPLV ((UINTN)(1) << PAGE_RPLV_SHIFT)
> +#define CACHE_MASK ((UINTN)(3) << CACHE_SHIFT)
> +#define PFN_SHIFT (EFI_PAGE_SHIFT - 12 + PAGE_PFN_SHIFT)
> +
> +#define PLV_KERNEL 0
> +#define PLV_USER 3
> +
> +#define PAGE_USER (PLV_USER << PAGE_PLV_SHIFT)
> +#define PAGE_KERNEL (PLV_KERN << PAGE_PLV_SHIFT)
> +
> +#define CACHE_SUC (0 << CACHE_SHIFT) // Strong-ordered UnCached
> +#define CACHE_CC (1 << CACHE_SHIFT) // Coherent Cached
> +#define CACHE_WUC (2 << CACHE_SHIFT) // Weak-ordered UnCached
> +
> +#define EFI_MEMORY_CACHETYPE_MASK (EFI_MEMORY_UC | \
> + EFI_MEMORY_WC | \
> + EFI_MEMORY_WT | \
> + EFI_MEMORY_WB | \
> + EFI_MEMORY_UCE \
> + )
> +#endif
> +
> +typedef struct {
> + EFI_PHYSICAL_ADDRESS PhysicalBase;
> + EFI_VIRTUAL_ADDRESS VirtualBase;
> + UINTN Length;
> + UINTN Attributes;
> +} MEMORY_REGION_DESCRIPTOR;
> +
> +/**
> + Converts EFI Attributes to corresponding architecture Attributes.
> +
> + @param[in] EfiAttributes Efi Attributes.
> +
> + @retval Corresponding architecture attributes.
> +**/
> +UINTN
> +EfiAttributeConverse (
> + IN UINTN EfiAttributes
> + );
> +
> +/**
> + Finds the length and memory properties of the memory region
> corresponding to the specified base address.
> +
> + @param[in] BaseAddress To find the base address of the memory
> region.
> + @param[in] EndAddress To find the end address of the memory region.
> + @param[out] RegionLength The length of the memory region found.
> + @param[out] RegionAttributes Properties of the memory region found.
> +
> + @retval EFI_SUCCESS The corresponding memory area was successfully
> found
> + EFI_NOT_FOUND No memory area found
> +**/
> +EFI_STATUS
> +GetMemoryRegionAttribute (
> + IN UINTN BaseAddress,
> + IN UINTN EndAddress,
> + OUT UINTN *RegionLength,
> + OUT UINTN *RegionAttributes
> + );
> +
> +/**
> + Sets the Attributes of the specified memory region
> +
> + @param[in] BaseAddress The base address of the memory region to set
> the Attributes.
> + @param[in] Length The length of the memory region to set the
> Attributes.
> + @param[in] Attributes The Attributes to be set.
> +
> + @retval EFI_SUCCESS The Attributes was set successfully
> +**/
> +EFI_STATUS
> +SetMemoryAttributes (
> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
> + IN UINTN Length,
> + IN UINTN Attributes
> + );
> +
> +/**
> + Sets the non-executable Attributes for the specified memory region
> +
> + @param[in] BaseAddress The base address of the memory region to set
> the Attributes.
> + @param[in] Length The length of the memory region to set the
> Attributes.
> +
> + @retval EFI_SUCCESS The Attributes was set successfully
> +**/
> +EFI_STATUS
> +SetMemoryRegionNoExec (
> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
> + IN UINTN Length
> + );
> +
> +/**
> + Clears the non-executable Attributes for the specified memory region
> +
> + @param[in] BaseAddress The base address of the memory region to clear
> the Attributes.
> + @param[in] Length The length of the memory region to clear the
> Attributes.
> +
> + @retval EFI_SUCCESS The Attributes was clear successfully
> +**/
> +EFI_STATUS
> +EFIAPI
> +ClearMemoryRegionNoExec (
> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
> + IN UINT64 Length
> + );
> +
> +/**
> + Sets the read-only Attributes for the specified memory region
> +
> + @param[in] BaseAddress The base address of the memory region to set
> the Attributes.
> + @param[in] Length The length of the memory region to set the
> Attributes.
> +
> + @retval EFI_SUCCESS The Attributes was set successfully
> +**/
> +EFI_STATUS
> +EFIAPI
> +SetMemoryRegionReadOnly (
> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
> + IN UINT64 Length
> + );
> +
> +/**
> + Clears the read-only Attributes for the specified memory region
> +
> + @param[in] BaseAddress The base address of the memory region to clear
> the Attributes.
> + @param[in] Length The length of the memory region to clear the
> Attributes.
> +
> + @retval EFI_SUCCESS The Attributes was clear successfully
> +**/
> +EFI_STATUS
> +EFIAPI
> +ClearMemoryRegionReadOnly (
> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
> + IN UINT64 Length
> + );
> +
> +/**
> + Create a page table and initialize the memory management unit(MMU).
> +
> + @param[in] MemoryTable A pointer to a memory ragion table.
> + @param[out] TranslationTableBase A pointer to a translation table base
> address.
> + @param[in out] TranslationTableSize A pointer to a translation table base
> size.
> +
> + @retval EFI_SUCCESS Configure MMU successfully.
> + EFI_INVALID_PARAMETER MemoryTable is NULL.
> + EFI_UNSUPPORTED Out of memory space or size not aligned.
> +**/
> +EFI_STATUS
> +EFIAPI
> +ConfigureMemoryManagementUint (
> + IN MEMORY_REGION_DESCRIPTOR *MemoryTable,
> + OUT VOID **TranslationTableBase OPTIONAL,
> + IN OUT UINTN *TranslationTableSize OPTIONAL
> + );
> +
> +#endif // CPU_MMU_LIB_H_
> diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec index
> 154b1d06fe..150beae981 100644
> --- a/UefiCpuPkg/UefiCpuPkg.dec
> +++ b/UefiCpuPkg/UefiCpuPkg.dec
> @@ -62,6 +62,10 @@
> ## @libraryclass Provides function for manipulating x86 paging structures.
> CpuPageTableLib|Include/Library/CpuPageTableLib.h
>
> +[LibraryClasses.LoongArch64]
> + ## @libraryclass Provides macros and functions for the memory
> management unit.
> + CpuMmuLib|Include/Library/CpuMmuLib.h
> +
> ## @libraryclass Provides functions for manipulating smram savestate
> registers.
> MmSaveStateLib|Include/Library/MmSaveStateLib.h
>
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110936): https://edk2.groups.io/g/devel/message/110936
Mute This Topic: https://groups.io/mt/102413866/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg
2023-11-09 1:17 ` Andrei Warkentin
@ 2023-11-14 2:00 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-14 2:00 UTC (permalink / raw)
To: devel, andrei.warkentin
Cc: Dong, Eric, Ni, Ray, Kumar, Rahul R, Gerd Hoffmann, Leif Lindholm,
Ard Biesheuvel, Sami Mujawar, Sunil V L
[-- Attachment #1: Type: text/plain, Size: 11324 bytes --]
Hi Andrei,
I agree with you, I will move LoongArch-specific stuff from UefiCpuPkg
to MdePkg/Include/ in V3.
And you are also saied record the idea of moving ArmMmuLib to CpuMmuLib,
I would to say, this header is referenced from ArmPkg, and I plan to
move the ArmMmuLib from ArmPkg to UefiCpuPkg after merging this patch
set, and other BZ number will be used. The premise is that the
maintainers of ArmPkg agrees move operation.
Thanks,
Chao
On 2023/11/9 09:17, Andrei Warkentin wrote:
> Hi Chao,
>
> I see that you're adding a header, CpuMmuLib.h, but this header is not generic - it includes a bunch of Loongson arch-specific "stuff".
>
> I agree in principle that there's room for a generic CpuMmuLib, and I don't think you ought to be on the hook to refactor ArmMmuLib, but I suggest moving
> the architecture-specific PTE #defines into MdePkg/Include similar to ./MdePkg/Include/Register/RiscV64. (it would, though, be nice to at least record the idea of moving ArmMmuLib to CpuMmuLib.... raise a BZ for that or something!)
>
> This will avoid the #ifdef MDE_CPU_LOONGARCH64 inside a generic Library header.
>
> A
>
>> -----Original Message-----
>> From: Chao Li<lichao@loongson.cn>
>> Sent: Sunday, November 5, 2023 9:28 PM
>> To:devel@edk2.groups.io
>> Cc: Dong, Eric<eric.dong@intel.com>; Ni, Ray<ray.ni@intel.com>; Kumar,
>> Rahul R<rahul.r.kumar@intel.com>; Gerd Hoffmann<kraxel@redhat.com>;
>> Leif Lindholm<quic_llindhol@quicinc.com>; Ard Biesheuvel
>> <ardb+tianocore@kernel.org>; Sami Mujawar<sami.mujawar@arm.com>;
>> Sunil V L<sunilvl@ventanamicro.com>; Warkentin, Andrei
>> <andrei.warkentin@intel.com>
>> Subject: [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg
>>
>> Add a new header file CpuMmuLib.h, whitch is referenced from
>> ArmPkg/Include/Library/ArmMmuLib.h. Currently, only support for
>> LoongArch64 is added, and more architectures can be accommodated in the
>> future.
>>
>> BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>>
>> Cc: Eric Dong<eric.dong@intel.com>
>> Cc: Ray Ni<ray.ni@intel.com>
>> Cc: Rahul Kumar<rahul1.kumar@intel.com>
>> Cc: Gerd Hoffmann<kraxel@redhat.com>
>> Cc: Leif Lindholm<quic_llindhol@quicinc.com>
>> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
>> Cc: Sami Mujawar<sami.mujawar@arm.com>
>> Cc: Sunil V L<sunilvl@ventanamicro.com>
>> Cc: Andrei Warkentin<andrei.warkentin@intel.com>
>> Signed-off-by: Chao Li<lichao@loongson.cn>
>> ---
>> UefiCpuPkg/Include/Library/CpuMmuLib.h | 194
>> +++++++++++++++++++++++++
>> UefiCpuPkg/UefiCpuPkg.dec | 4 +
>> 2 files changed, 198 insertions(+)
>> create mode 100644 UefiCpuPkg/Include/Library/CpuMmuLib.h
>>
>> diff --git a/UefiCpuPkg/Include/Library/CpuMmuLib.h
>> b/UefiCpuPkg/Include/Library/CpuMmuLib.h
>> new file mode 100644
>> index 0000000000..8f524d31d4
>> --- /dev/null
>> +++ b/UefiCpuPkg/Include/Library/CpuMmuLib.h
>> @@ -0,0 +1,194 @@
>> +/** @file
>> +
>> + Copyright (c) 2023 Loongson Technology Corporation Limited. All
>> + rights reserved.<BR>
>> +
>> + SPDX-License-Identifier: BSD-2-Clause-Patent
>> +
>> +**/
>> +
>> +#ifndef CPU_MMU_LIB_H_
>> +#define CPU_MMU_LIB_H_
>> +
>> +#include <Uefi/UefiBaseType.h>
>> +
>> +#ifdef MDE_CPU_LOONGARCH64
>> +
>> +/* Page table property definitions */
>> +#define PAGE_VALID_SHIFT 0
>> +#define PAGE_DIRTY_SHIFT 1
>> +#define PAGE_PLV_SHIFT 2 // 2~3, two bits
>> +#define CACHE_SHIFT 4 // 4~5, two bits
>> +#define PAGE_GLOBAL_SHIFT 6
>> +#define PAGE_HUGE_SHIFT 6 // HUGE is a PMD bit
>> +
>> +#define PAGE_HGLOBAL_SHIFT 12 // HGlobal is a PMD bit
>> +#define PAGE_PFN_SHIFT 12
>> +#define PAGE_PFN_END_SHIFT 48
>> +#define PAGE_NO_READ_SHIFT 61
>> +#define PAGE_NO_EXEC_SHIFT 62
>> +#define PAGE_RPLV_SHIFT 63
>> +
>> +/* Used by TLB hardware (placed in EntryLo*) */
>> +#define PAGE_VALID ((UINTN)(1) << PAGE_VALID_SHIFT)
>> +#define PAGE_DIRTY ((UINTN)(1) << PAGE_DIRTY_SHIFT)
>> +#define PAGE_PLV ((UINTN)(3) << PAGE_PLV_SHIFT)
>> +#define PAGE_GLOBAL ((UINTN)(1) << PAGE_GLOBAL_SHIFT)
>> +#define PAGE_HUGE ((UINTN)(1) << PAGE_HUGE_SHIFT)
>> +#define PAGE_HGLOBAL ((UINTN)(1) << PAGE_HGLOBAL_SHIFT) #define
>> +PAGE_NO_READ ((UINTN)(1) << PAGE_NO_READ_SHIFT) #define
>> PAGE_NO_EXEC
>> +((UINTN)(1) << PAGE_NO_EXEC_SHIFT)
>> +#define PAGE_RPLV ((UINTN)(1) << PAGE_RPLV_SHIFT)
>> +#define CACHE_MASK ((UINTN)(3) << CACHE_SHIFT)
>> +#define PFN_SHIFT (EFI_PAGE_SHIFT - 12 + PAGE_PFN_SHIFT)
>> +
>> +#define PLV_KERNEL 0
>> +#define PLV_USER 3
>> +
>> +#define PAGE_USER (PLV_USER << PAGE_PLV_SHIFT)
>> +#define PAGE_KERNEL (PLV_KERN << PAGE_PLV_SHIFT)
>> +
>> +#define CACHE_SUC (0 << CACHE_SHIFT) // Strong-ordered UnCached
>> +#define CACHE_CC (1 << CACHE_SHIFT) // Coherent Cached
>> +#define CACHE_WUC (2 << CACHE_SHIFT) // Weak-ordered UnCached
>> +
>> +#define EFI_MEMORY_CACHETYPE_MASK (EFI_MEMORY_UC | \
>> + EFI_MEMORY_WC | \
>> + EFI_MEMORY_WT | \
>> + EFI_MEMORY_WB | \
>> + EFI_MEMORY_UCE \
>> + )
>> +#endif
>> +
>> +typedef struct {
>> + EFI_PHYSICAL_ADDRESS PhysicalBase;
>> + EFI_VIRTUAL_ADDRESS VirtualBase;
>> + UINTN Length;
>> + UINTN Attributes;
>> +} MEMORY_REGION_DESCRIPTOR;
>> +
>> +/**
>> + Converts EFI Attributes to corresponding architecture Attributes.
>> +
>> + @param[in] EfiAttributes Efi Attributes.
>> +
>> + @retval Corresponding architecture attributes.
>> +**/
>> +UINTN
>> +EfiAttributeConverse (
>> + IN UINTN EfiAttributes
>> + );
>> +
>> +/**
>> + Finds the length and memory properties of the memory region
>> corresponding to the specified base address.
>> +
>> + @param[in] BaseAddress To find the base address of the memory
>> region.
>> + @param[in] EndAddress To find the end address of the memory region.
>> + @param[out] RegionLength The length of the memory region found.
>> + @param[out] RegionAttributes Properties of the memory region found.
>> +
>> + @retval EFI_SUCCESS The corresponding memory area was successfully
>> found
>> + EFI_NOT_FOUND No memory area found
>> +**/
>> +EFI_STATUS
>> +GetMemoryRegionAttribute (
>> + IN UINTN BaseAddress,
>> + IN UINTN EndAddress,
>> + OUT UINTN *RegionLength,
>> + OUT UINTN *RegionAttributes
>> + );
>> +
>> +/**
>> + Sets the Attributes of the specified memory region
>> +
>> + @param[in] BaseAddress The base address of the memory region to set
>> the Attributes.
>> + @param[in] Length The length of the memory region to set the
>> Attributes.
>> + @param[in] Attributes The Attributes to be set.
>> +
>> + @retval EFI_SUCCESS The Attributes was set successfully
>> +**/
>> +EFI_STATUS
>> +SetMemoryAttributes (
>> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
>> + IN UINTN Length,
>> + IN UINTN Attributes
>> + );
>> +
>> +/**
>> + Sets the non-executable Attributes for the specified memory region
>> +
>> + @param[in] BaseAddress The base address of the memory region to set
>> the Attributes.
>> + @param[in] Length The length of the memory region to set the
>> Attributes.
>> +
>> + @retval EFI_SUCCESS The Attributes was set successfully
>> +**/
>> +EFI_STATUS
>> +SetMemoryRegionNoExec (
>> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
>> + IN UINTN Length
>> + );
>> +
>> +/**
>> + Clears the non-executable Attributes for the specified memory region
>> +
>> + @param[in] BaseAddress The base address of the memory region to clear
>> the Attributes.
>> + @param[in] Length The length of the memory region to clear the
>> Attributes.
>> +
>> + @retval EFI_SUCCESS The Attributes was clear successfully
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +ClearMemoryRegionNoExec (
>> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
>> + IN UINT64 Length
>> + );
>> +
>> +/**
>> + Sets the read-only Attributes for the specified memory region
>> +
>> + @param[in] BaseAddress The base address of the memory region to set
>> the Attributes.
>> + @param[in] Length The length of the memory region to set the
>> Attributes.
>> +
>> + @retval EFI_SUCCESS The Attributes was set successfully
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +SetMemoryRegionReadOnly (
>> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
>> + IN UINT64 Length
>> + );
>> +
>> +/**
>> + Clears the read-only Attributes for the specified memory region
>> +
>> + @param[in] BaseAddress The base address of the memory region to clear
>> the Attributes.
>> + @param[in] Length The length of the memory region to clear the
>> Attributes.
>> +
>> + @retval EFI_SUCCESS The Attributes was clear successfully
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +ClearMemoryRegionReadOnly (
>> + IN EFI_PHYSICAL_ADDRESS BaseAddress,
>> + IN UINT64 Length
>> + );
>> +
>> +/**
>> + Create a page table and initialize the memory management unit(MMU).
>> +
>> + @param[in] MemoryTable A pointer to a memory ragion table.
>> + @param[out] TranslationTableBase A pointer to a translation table base
>> address.
>> + @param[in out] TranslationTableSize A pointer to a translation table base
>> size.
>> +
>> + @retval EFI_SUCCESS Configure MMU successfully.
>> + EFI_INVALID_PARAMETER MemoryTable is NULL.
>> + EFI_UNSUPPORTED Out of memory space or size not aligned.
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +ConfigureMemoryManagementUint (
>> + IN MEMORY_REGION_DESCRIPTOR *MemoryTable,
>> + OUT VOID **TranslationTableBase OPTIONAL,
>> + IN OUT UINTN *TranslationTableSize OPTIONAL
>> + );
>> +
>> +#endif // CPU_MMU_LIB_H_
>> diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec index
>> 154b1d06fe..150beae981 100644
>> --- a/UefiCpuPkg/UefiCpuPkg.dec
>> +++ b/UefiCpuPkg/UefiCpuPkg.dec
>> @@ -62,6 +62,10 @@
>> ## @libraryclass Provides function for manipulating x86 paging structures.
>> CpuPageTableLib|Include/Library/CpuPageTableLib.h
>>
>> +[LibraryClasses.LoongArch64]
>> + ## @libraryclass Provides macros and functions for the memory
>> management unit.
>> + CpuMmuLib|Include/Library/CpuMmuLib.h
>> +
>> ## @libraryclass Provides functions for manipulating smram savestate
>> registers.
>> MmSaveStateLib|Include/Library/MmSaveStateLib.h
>>
>> --
>> 2.27.0
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111187): https://edk2.groups.io/g/devel/message/111187
Mute This Topic: https://groups.io/mt/102413866/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 13387 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 12/30] UefiCpuPkg: Add LoongArch64CpuMmuLib to UefiCpuPkg
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (10 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 11/30] UefiCpuPkg: Add CpuMmuLib.h to UefiCpuPkg Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 13/30] UefiCpuPkg: Add multiprocessor library for LoongArch64 Chao Li
` (20 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel
Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann, Baoqi Zhang,
Dongyan Qian, Xianglai Li, Bibo Mao
Add a new library LoongArch64CpuMmuLib. It provides two-stage MMU library
instances, PEI and DXE.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Dongyan Qian <qiandongyan@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../LoongArch64CpuMmuLib/CommonMmuLib.c | 963 ++++++++++++++++++
.../LoongArch64CpuMmuLib/CommonMmuLib.h | 43 +
.../LoongArch64CpuMmuLib/DxeCpuMmuLib.inf | 37 +
.../LoongArch64CpuMmuLib/DxeCpuMmuLib.uni | 14 +
.../Library/LoongArch64CpuMmuLib/Page.h | 279 +++++
.../LoongArch64CpuMmuLib/PeiCpuMmuLib.c | 165 +++
.../LoongArch64CpuMmuLib/PeiCpuMmuLib.inf | 44 +
.../LoongArch64CpuMmuLib/PeiCpuMmuLib.uni | 14 +
UefiCpuPkg/Library/LoongArch64CpuMmuLib/Tlb.h | 48 +
.../LoongArch64CpuMmuLib/TlbOperation.S | 44 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
11 files changed, 1653 insertions(+)
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.c
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.h
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/Page.h
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.c
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/Tlb.h
create mode 100644 UefiCpuPkg/Library/LoongArch64CpuMmuLib/TlbOperation.S
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.c b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.c
new file mode 100644
index 0000000000..e2c6ec1fc6
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.c
@@ -0,0 +1,963 @@
+/** @file
+
+ CPU Memory Map Unit Handler Library common functions.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Pgd or Pgd or PGD - Page Global Directory
+ - Pud or Pud or PUD - Page Upper Directory
+ - Pmd or Pmd or PMD - Page Middle Directory
+ - Pte or pte or PTE - Page Table Entry
+ - Val or VAL or val - Value
+ - Dir - Directory
+**/
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/CpuMmuLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include "Tlb.h"
+#include "Page.h"
+
+BOOLEAN mMmuInited = FALSE;
+#define SWAP_PAGE_DIR CsrRead(LOONGARCH_CSR_PGDL)
+
+/**
+ Check to see if mmu successfully initializes.
+
+ @param VOID.
+
+ @retval TRUE Initialization has been completed.
+ FALSE Initialization did not complete.
+**/
+BOOLEAN
+MmuIsInit (
+ VOID
+ )
+{
+ if (mMmuInited || (SWAP_PAGE_DIR != 0)) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ Iterates through the page directory to initialize it.
+
+ @param Dst A pointer to the directory of the page to initialize.
+ @param Num The number of page directories to initialize.
+ @param Src A pointer to the data used to initialize the page directory.
+
+ @return VOID.
+**/
+VOID
+PageDirInit (
+ IN VOID *Dst,
+ IN UINTN Num,
+ IN VOID *Src
+ )
+{
+ UINTN *Ptr;
+ UINTN *End;
+ UINTN Entry;
+
+ Entry = (UINTN)Src;
+ Ptr = (UINTN *)Dst;
+ End = Ptr + Num;
+
+ for ( ; Ptr < End; Ptr++) {
+ *Ptr = Entry;
+ }
+
+ return;
+}
+
+/**
+ Gets the virtual address corresponding to the page global directory table entry.
+
+ @param Address the virtual address for the table entry.
+
+ @retval PGD A pointer to get the table item.
+**/
+PGD *
+PgdOffset (
+ IN UINTN Address
+ )
+{
+ return (PGD *)(SWAP_PAGE_DIR) + PGD_INDEX (Address);
+}
+
+/**
+ Gets the virtual address corresponding to the page upper directory table entry.
+
+ @param Pgd A pointer to a page global directory table entry.
+ @param Address the virtual address for the table entry.
+
+ @retval PUD A pointer to get the table item.
+**/
+PUD *
+PudOffset (
+ IN PGD *Pgd,
+ IN UINTN Address
+ )
+{
+ UINTN PgdVal;
+
+ PgdVal = (UINTN)PGD_VAL (*Pgd);
+
+ return (PUD *)PgdVal + PUD_INDEX (Address);
+}
+
+/**
+ Gets the virtual address corresponding to the page middle directory table entry.
+
+ @param Pud A pointer to a page upper directory table entry.
+ @param Address the virtual address for the table entry.
+
+ @retval PMD A pointer to get the table item.
+**/
+PMD *
+PmdOffset (
+ IN PUD *Pud,
+ IN UINTN Address
+ )
+{
+ UINTN PudVal;
+
+ PudVal = PUD_VAL (*Pud);
+
+ return (PMD *)PudVal + PMD_INDEX (Address);
+}
+
+/**
+ Gets the virtual address corresponding to the page table entry.
+
+ @param Pmd A pointer to a page middle directory table entry.
+ @param Address the virtual address for the table entry.
+
+ @retval PTE A pointer to get the table item.
+**/
+PTE *
+PteOffset (
+ IN PMD *Pmd,
+ IN UINTN Address
+ )
+{
+ UINTN PmdVal;
+
+ PmdVal = (UINTN)PMD_VAL (*Pmd);
+
+ return (PTE *)PmdVal + PTE_INDEX (Address);
+}
+
+/**
+ Sets the value of the page table entry.
+
+ @param Pte A pointer to a page table entry.
+ @param PteVal The value of the page table entry to set.
+
+**/
+VOID
+SetPte (
+ IN PTE *Pte,
+ IN PTE PteVal
+ )
+{
+ *Pte = PteVal;
+}
+
+/**
+ Sets the value of the page global directory.
+
+ @param Pgd A pointer to a page global directory.
+ @param Pud The value of the page global directory to set.
+
+**/
+VOID
+SetPgd (
+ IN PGD *Pgd,
+ IN PUD *Pud
+ )
+{
+ *Pgd = (PGD) {
+ ((UINTN)Pud)
+ };
+}
+
+/**
+ Sets the value of the page upper directory.
+
+ @param Pud A pointer to a page upper directory.
+ @param Pmd The value of the page upper directory to set.
+
+**/
+VOID
+SetPud (
+ IN PUD *Pud,
+ IN PMD *Pmd
+ )
+{
+ *Pud = (PUD) {
+ ((UINTN)Pmd)
+ };
+}
+
+/**
+ Sets the value of the page middle directory.
+
+ @param Pmd A pointer to a page middle directory.
+ @param Pte The value of the page middle directory to set.
+
+**/
+VOID
+SetPmd (
+ IN PMD *Pmd,
+ IN PTE *Pte
+ )
+{
+ *Pmd = (PMD) {
+ ((UINTN)Pte)
+ };
+}
+
+/**
+ Free up memory space occupied by page tables.
+
+ @param Pte A pointer to the page table.
+
+**/
+VOID
+PteFree (
+ IN PTE *Pte
+ )
+{
+ FreePages ((VOID *)Pte, 1);
+}
+
+/**
+ Free up memory space occupied by page middle directory.
+
+ @param Pmd A pointer to the page middle directory.
+
+**/
+VOID
+PmdFree (
+ IN PMD *Pmd
+ )
+{
+ FreePages ((VOID *)Pmd, 1);
+}
+
+/**
+ Free up memory space occupied by page upper directory.
+
+ @param Pud A pointer to the page upper directory.
+
+**/
+VOID
+PudFree (
+ IN PUD *Pud
+ )
+{
+ FreePages ((VOID *)Pud, 1);
+}
+
+/**
+ Requests the memory space required for the page upper directory,
+ initializes it, and places it in the specified page global directory
+
+ @param Pgd A pointer to the page global directory.
+
+ @retval EFI_SUCCESS Memory request successful.
+ @retval EFI_OUT_OF_RESOURCES Resource exhaustion cannot be requested to memory.
+**/
+EFI_STATUS
+PudAlloc (
+ IN PGD *Pgd
+ )
+{
+ PUD *Pud;
+
+ Pud = (PUD *)AllocatePages (1);
+ if (Pud == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PageDirInit ((VOID *)Pud, ENTRYS_PER_PUD, (VOID *)INVALID_PAGE);
+
+ SetPgd (Pgd, Pud);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Requests the memory space required for the page middle directory,
+ initializes it, and places it in the specified page upper directory
+
+ @param Pud A pointer to the page upper directory.
+
+ @retval EFI_SUCCESS Memory request successful.
+ @retval EFI_OUT_OF_RESOURCES Resource exhaustion cannot be requested to memory.
+**/
+EFI_STATUS
+PmdAlloc (
+ IN PUD *Pud
+ )
+{
+ PMD *Pmd;
+
+ Pmd = (PMD *)AllocatePages (1);
+ if (!Pmd) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PageDirInit ((VOID *)Pmd, ENTRYS_PER_PMD, (VOID *)INVALID_PAGE);
+
+ SetPud (Pud, Pmd);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Requests the memory space required for the page table,
+ initializes it, and places it in the specified page middle directory
+
+ @param Pmd A pointer to the page middle directory.
+
+ @retval EFI_SUCCESS Memory request successful.
+ @retval EFI_OUT_OF_RESOURCES Resource exhaustion cannot be requested to memory.
+**/
+EFI_STATUS
+PteAlloc (
+ IN PMD *Pmd
+ )
+{
+ PTE *Pte;
+
+ Pte = (PTE *)AllocatePages (1);
+ if (!Pte) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Pte = ZeroMem (Pte, EFI_PAGE_SIZE);
+
+ SetPmd (Pmd, Pte);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Requests the memory space required for the page upper directory,
+ initializes it, and places it in the specified page global directory,
+ and get the page upper directory entry corresponding to the virtual address.
+
+ @param Pgd A pointer to the page global directory.
+ @param Address The corresponding virtual address of the page table entry.
+
+ @retval A pointer to the page upper directory entry. Return NULL, if
+ allocate the memory buffer is fail.
+**/
+PUD *
+PudAllocGet (
+ IN PGD *Pgd,
+ IN UINTN Address
+ )
+{
+ EFI_STATUS Status;
+
+ if (PGD_IS_EMPTY (*Pgd)) {
+ Status = PudAlloc (Pgd);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ }
+
+ return PudOffset (Pgd, Address);
+}
+
+/**
+ Requests the memory space required for the page middle directory,
+ initializes it, and places it in the specified page upper directory,
+ and get the page middle directory entry corresponding to the virtual address.
+
+ @param Pud A pointer to the page upper directory.
+ @param Address The corresponding virtual address of the page table entry.
+
+ @retval A pointer to the page middle directory entry. Return NULL, if
+ allocate the memory buffer is fail.
+**/
+PMD *
+PmdAllocGet (
+ IN PUD *Pud,
+ IN UINTN Address
+ )
+{
+ EFI_STATUS Status;
+
+ if (PUD_IS_EMPTY (*Pud)) {
+ Status = PmdAlloc (Pud);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ }
+
+ return PmdOffset (Pud, Address);
+}
+
+/**
+ Requests the memory space required for the page table,
+ initializes it, and places it in the specified page middle directory,
+ and get the page table entry corresponding to the virtual address.
+
+ @param Pmd A pointer to the page upper directory.
+ @param Address The corresponding virtual address of the page table entry.
+
+ @retval A pointer to the page table entry. Return NULL, if allocate
+ the memory buffer is fail.
+**/
+PTE *
+PteAllocGet (
+ IN PMD *Pmd,
+ IN UINTN Address
+ )
+{
+ EFI_STATUS Status;
+
+ if (PMD_IS_EMPTY (*Pmd)) {
+ Status = PteAlloc (Pmd);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ }
+
+ return PteOffset (Pmd, Address);
+}
+
+/**
+ Gets the physical address of the page table entry corresponding to the specified virtual address.
+
+ @param Address The corresponding virtual address of the page table entry.
+
+ @retval A pointer to the page table entry.
+ @retval NULL
+**/
+PTE *
+GetPteAddress (
+ IN UINTN Address
+ )
+{
+ PGD *Pgd;
+ PUD *Pud;
+ PMD *Pmd;
+
+ Pgd = PgdOffset (Address);
+
+ if (PGD_IS_EMPTY (*Pgd)) {
+ return NULL;
+ }
+
+ Pud = PudOffset (Pgd, Address);
+
+ if (PUD_IS_EMPTY (*Pud)) {
+ return NULL;
+ }
+
+ Pmd = PmdOffset (Pud, Address);
+ if (PMD_IS_EMPTY (*Pmd)) {
+ return NULL;
+ }
+
+ if (IS_HUGE_PAGE (Pmd->PmdVal)) {
+ return ((PTE *)Pmd);
+ }
+
+ return PteOffset (Pmd, Address);
+}
+
+/**
+ Gets the Attributes of Huge Page.
+
+ @param Pmd A pointer to the page middle directory.
+
+ @retval Value of Attributes.
+**/
+UINTN
+GetHugePageAttributes (
+ IN PMD *Pmd
+ )
+{
+ UINTN Attributes;
+ UINTN GlobalFlag;
+ UINTN HugeVal;
+
+ HugeVal = PMD_VAL (*Pmd);
+ Attributes = HugeVal & (~HUGEP_PAGE_MASK);
+ GlobalFlag = ((Attributes & (1 << PAGE_HGLOBAL_SHIFT)) >> PAGE_HGLOBAL_SHIFT) << PAGE_GLOBAL_SHIFT;
+ Attributes &= ~(1 << PAGE_HGLOBAL_SHIFT);
+ Attributes |= GlobalFlag;
+ return Attributes;
+}
+
+/**
+ Establishes a page table entry based on the specified memory region.
+
+ @param Pmd A pointer to the page middle directory.
+ @param Address The memory space start address.
+ @param End The end address of the memory space.
+ @param Attributes Memory space Attributes.
+
+ @retval EFI_SUCCESS The page table entry was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page table entry establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+MemoryMapPteRange (
+ IN PMD *Pmd,
+ IN UINTN Address,
+ IN UINTN End,
+ IN UINTN Attributes
+ )
+{
+ PTE *Pte;
+ PTE PteVal;
+ BOOLEAN UpDate;
+
+ Pte = PteAllocGet (Pmd, Address);
+ if (!Pte) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DEBUG ((
+ DEBUG_INFO,
+ "%a %d Address %p End %p Attributes %llx\n",
+ __func__,
+ __LINE__,
+ Address,
+ End,
+ Attributes
+ ));
+
+ do {
+ UpDate = FALSE;
+ PteVal = MAKE_PTE (Address, Attributes);
+
+ if ((!PTE_IS_EMPTY (*Pte)) &&
+ (PTE_VAL (*Pte) != PTE_VAL (PteVal)))
+ {
+ UpDate = TRUE;
+ }
+
+ SetPte (Pte, PteVal);
+ if (UpDate) {
+ InvalidTlb (Address);
+ }
+ } while (Pte++, Address += EFI_PAGE_SIZE, Address != End);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Convert Huge Page to Page.
+
+ @param Pmd A pointer to the page middle directory.
+ @param Address The memory space start address.
+ @param End The end address of the memory space.
+ @param Attributes Memory space Attributes.
+
+ @retval EFI_SUCCESS The page table entry was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page table entry establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+ConvertHugePageToPage (
+ IN PMD *Pmd,
+ IN UINTN Address,
+ IN UINTN End,
+ IN UINTN Attributes
+ )
+{
+ UINTN OldAttributes;
+ UINTN HugePageEnd;
+ UINTN HugePageStart;
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+
+ if ((PMD_IS_EMPTY (*Pmd)) ||
+ (!IS_HUGE_PAGE (Pmd->PmdVal)))
+ {
+ Status |= MemoryMapPteRange (Pmd, Address, End, Attributes);
+ } else {
+ OldAttributes = GetHugePageAttributes (Pmd);
+ if (Attributes == OldAttributes) {
+ return Status;
+ }
+
+ SetPmd (Pmd, (PTE *)(INVALID_PAGE));
+ HugePageStart = Address & PMD_MASK;
+ HugePageEnd = HugePageStart + HUGE_PAGE_SIZE;
+ ASSERT (HugePageEnd >= End);
+
+ if (Address > HugePageStart) {
+ Status |= MemoryMapPteRange (Pmd, HugePageStart, Address, OldAttributes);
+ }
+
+ Status |= MemoryMapPteRange (Pmd, Address, End, Attributes);
+
+ if (End < HugePageEnd) {
+ Status |= MemoryMapPteRange (Pmd, End, HugePageEnd, OldAttributes);
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Establishes a page middle directory based on the specified memory region.
+
+ @param Pud A pointer to the page upper directory.
+ @param Address The memory space start address.
+ @param End The end address of the memory space.
+ @param Attributes Memory space Attributes.
+
+ @retval EFI_SUCCESS The page middle directory was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page middle directory establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+MemoryMapPmdRange (
+ IN PUD *Pud,
+ IN UINTN Address,
+ IN UINTN End,
+ IN UINTN Attributes
+ )
+{
+ PMD *Pmd;
+ UINTN Next;
+ PTE PteVal;
+ BOOLEAN UpDate;
+
+ Pmd = PmdAllocGet (Pud, Address);
+ if (!Pmd) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ do {
+ Next = PMD_ADDRESS_END (Address, End);
+ if (((Address & (~PMD_MASK)) == 0) &&
+ ((Next & (~PMD_MASK)) == 0) &&
+ (PMD_IS_EMPTY (*Pmd) || IS_HUGE_PAGE (Pmd->PmdVal)))
+ {
+ UpDate = FALSE;
+ PteVal = MAKE_HUGE_PTE (Address, Attributes);
+
+ if ((!PMD_IS_EMPTY (*Pmd)) &&
+ (PMD_VAL (*Pmd) != PTE_VAL (PteVal)))
+ {
+ UpDate = TRUE;
+ }
+
+ SetPmd (Pmd, (PTE *)PteVal.PteVal);
+ if (UpDate) {
+ InvalidTlb (Address);
+ }
+ } else {
+ ConvertHugePageToPage (Pmd, Address, Next, Attributes);
+ }
+ } while (Pmd++, Address = Next, Address != End);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Establishes a page upper directory based on the specified memory region.
+
+ @param Pgd A pointer to the page global directory.
+ @param Address The memory space start address.
+ @param End The end address of the memory space.
+ @param Attributes Memory space Attributes.
+
+ @retval EFI_SUCCESS The page upper directory was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page upper directory establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+MemoryMapPudRange (
+ IN PGD *Pgd,
+ IN UINTN Address,
+ IN UINTN End,
+ IN UINTN Attributes
+ )
+{
+ PUD *Pud;
+ UINTN Next;
+
+ Pud = PudAllocGet (Pgd, Address);
+ if (!Pud) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ do {
+ Next = PUD_ADDRESS_END (Address, End);
+ if (EFI_ERROR (MemoryMapPmdRange (Pud, Address, Next, Attributes))) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ } while (Pud++, Address = Next, Address != End);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Establishes a page global directory based on the specified memory region.
+
+ @param Start The memory space start address.
+ @param End The end address of the memory space.
+ @param Attributes Memory space Attributes.
+
+ @retval EFI_SUCCESS The page global directory was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page global directory establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+MemoryMapPageRange (
+ IN UINTN Start,
+ IN UINTN End,
+ IN UINTN Attributes
+ )
+{
+ PGD *Pgd;
+ UINTN Next;
+ UINTN Address;
+ EFI_STATUS Err;
+
+ Address = Start;
+
+ /* Get PGD(PTE PMD PUD PGD) in PageTables */
+ Pgd = PgdOffset (Address);
+ do {
+ Next = PGD_ADDRESS_END (Address, End);
+ /* Get Next Align Page to Map */
+ Err = MemoryMapPudRange (Pgd, Address, Next, Attributes);
+ if (Err) {
+ return Err;
+ }
+ } while (Pgd++, Address = Next, Address != End);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Page tables are established from memory-mapped tables.
+
+ @param MemoryRegion A pointer to a memory-mapped table entry.
+
+ @retval EFI_SUCCESS The page table was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page table establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+FillTranslationTable (
+ IN MEMORY_REGION_DESCRIPTOR *MemoryRegion
+ )
+{
+ return MemoryMapPageRange (
+ MemoryRegion->VirtualBase,
+ (MemoryRegion->Length + MemoryRegion->VirtualBase),
+ MemoryRegion->Attributes
+ );
+}
+
+/**
+ Convert EFI Attributes to Loongarch Attributes.
+
+ @param[in] EfiAttributes Efi Attributes.
+
+ @retval Corresponding architecture attributes.
+**/
+UINTN
+EfiAttributeConverse (
+ IN UINTN EfiAttributes
+ )
+{
+ UINTN LoongArchAttributes;
+
+ LoongArchAttributes = PAGE_VALID | PAGE_DIRTY | PLV_KERNEL | PAGE_GLOBAL;
+
+ switch (EfiAttributes & EFI_MEMORY_CACHETYPE_MASK) {
+ case EFI_MEMORY_UC:
+ LoongArchAttributes |= CACHE_SUC;
+ break;
+ case EFI_MEMORY_WC:
+ case EFI_MEMORY_WT:
+ case EFI_MEMORY_WB:
+ LoongArchAttributes |= CACHE_CC;
+ break;
+ default:
+ LoongArchAttributes |= CACHE_CC;
+ break;
+ }
+
+ // Write protection attributes
+ if (((EfiAttributes & EFI_MEMORY_RO) != 0) ||
+ ((EfiAttributes & EFI_MEMORY_WP) != 0))
+ {
+ LoongArchAttributes &= ~PAGE_DIRTY;
+ }
+
+ if ((EfiAttributes & EFI_MEMORY_RP) != 0) {
+ LoongArchAttributes |= PAGE_NO_READ;
+ }
+
+ // eXecute protection attribute
+ if ((EfiAttributes & EFI_MEMORY_XP) != 0) {
+ LoongArchAttributes |= PAGE_NO_EXEC;
+ }
+
+ return LoongArchAttributes;
+}
+
+/**
+ Finds the length and memory properties of the memory region corresponding to the specified base address.
+
+ @param[in] BaseAddress To find the base address of the memory region.
+ @param[in] EndAddress To find the end address of the memory region.
+ @param[out] RegionLength The length of the memory region found.
+ @param[out] RegionAttributes Properties of the memory region found.
+
+ @retval EFI_SUCCESS The corresponding memory area was successfully found
+ EFI_NOT_FOUND No memory area found
+**/
+EFI_STATUS
+GetMemoryRegionAttribute (
+ IN UINTN BaseAddress,
+ IN UINTN EndAddress,
+ OUT UINTN *RegionLength,
+ OUT UINTN *RegionAttributes
+ )
+{
+ PTE *Pte;
+ UINTN Attributes;
+ UINTN AttributesTmp;
+ UINTN MaxAddress;
+
+ if (!MmuIsInit ()) {
+ return EFI_UNSUPPORTED;
+ }
+
+ MaxAddress = LShiftU64 (1ULL, MAX_VA_BITS) - 1;
+ Pte = GetPteAddress (BaseAddress);
+
+ if (Pte == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ Attributes = GET_PAGE_ATTRIBUTES (*Pte);
+ if (IS_HUGE_PAGE (Pte->PteVal)) {
+ *RegionAttributes = Attributes & (~(PAGE_HUGE));
+ *RegionLength += HUGE_PAGE_SIZE;
+ } else {
+ *RegionLength += EFI_PAGE_SIZE;
+ *RegionAttributes = Attributes;
+ }
+
+ while (BaseAddress <= MaxAddress) {
+ Pte = GetPteAddress (BaseAddress);
+ if (Pte == NULL) {
+ return EFI_SUCCESS;
+ }
+
+ AttributesTmp = GET_PAGE_ATTRIBUTES (*Pte);
+ if (IS_HUGE_PAGE (Pte->PteVal)) {
+ if (AttributesTmp == Attributes) {
+ *RegionLength += HUGE_PAGE_SIZE;
+ }
+
+ BaseAddress += HUGE_PAGE_SIZE;
+ } else {
+ if (AttributesTmp == Attributes) {
+ *RegionLength += EFI_PAGE_SIZE;
+ }
+
+ BaseAddress += EFI_PAGE_SIZE;
+ }
+
+ if (BaseAddress > EndAddress) {
+ break;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets the Attributes of the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to set the Attributes.
+ @param[in] Length The length of the memory region to set the Attributes.
+ @param[in] Attributes The Attributes to be set.
+
+ @retval EFI_SUCCESS The Attributes was set successfully
+**/
+EFI_STATUS
+SetMemoryAttributes (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINTN Length,
+ IN UINTN Attributes
+ )
+{
+ if (!MmuIsInit ()) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Attributes = EfiAttributeConverse (Attributes);
+ MemoryMapPageRange (BaseAddress, BaseAddress + Length, Attributes);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets the non-executable Attributes for the specified memory region
+
+ @param[in] BaseAddress The base address of the memory region to set the Attributes.
+ @param[in] Length The length of the memory region to set the Attributes.
+
+ @retval EFI_SUCCESS The Attributes was set successfully
+**/
+EFI_STATUS
+SetMemoryRegionNoExec (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINTN Length
+ )
+{
+ if (MmuIsInit ()) {
+ Length = EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Length));
+ SetMemoryAttributes (BaseAddress, Length, EFI_MEMORY_XP);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Check to see if mmu successfully initializes and saves the result.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval RETURN_SUCCESS Initialization succeeded.
+**/
+RETURN_STATUS
+EFIAPI
+MmuInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ if (SWAP_PAGE_DIR != 0) {
+ mMmuInited = TRUE;
+ }
+
+ return RETURN_SUCCESS;
+}
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.h b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.h
new file mode 100644
index 0000000000..aa96f5143c
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/CommonMmuLib.h
@@ -0,0 +1,43 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Dir - Directory
+**/
+
+#ifndef MMU_LIB_CORE_H_
+#define MMU_LIB_CORE_H_
+
+/**
+ Iterates through the page directory to initialize it.
+
+ @param Dst A pointer to the directory of the page to initialize.
+ @param Num The number of page directories to initialize.
+ @param Src A pointer to the data used to initialize the page directory.
+
+ @retval VOID.
+**/
+VOID
+PageDirInit (
+ IN VOID *dest,
+ IN UINTN Count,
+ IN VOID *src
+ );
+
+/**
+ Page tables are established from memory-mapped tables.
+
+ @param MemoryRegion A pointer to a memory-mapped table entry.
+
+ @retval EFI_SUCCESS The page table was created successfully.
+ @retval EFI_OUT_OF_RESOURCES Page table establishment failed due to resource exhaustion.
+**/
+EFI_STATUS
+FillTranslationTable (
+ IN MEMORY_REGION_DESCRIPTOR *MemoryRegion
+ );
+
+#endif // MMU_LIB_CORE_H_
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
new file mode 100644
index 0000000000..d153354dd2
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
@@ -0,0 +1,37 @@
+## @file
+# CPU Memory Map Unit DXE phase driver.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeCpuMmuLib
+ MODULE_UNI_FILE = DxeCpuMmuLib.uni
+ FILE_GUID = DA8F0232-FB14-42F0-922C-63104D2C70BE
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = CpuMmuLib | DXE_DRIVER
+ CONSTRUCTOR = MmuInitialize
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ TlbOperation.S | GCC
+ CommonMmuLib.c
+ Tlb.h
+ Page.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ MemoryAllocationLib
+ PcdLib
+ DebugLib
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.uni b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.uni
new file mode 100644
index 0000000000..2e841d714c
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.uni
@@ -0,0 +1,14 @@
+// /** @file
+// CPU Memory Manager Unit library instance for DXE modules.
+//
+// CPU Memory Manager Unit library instance for DXE modules.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU Memory Manager Unit library instance for DXE modules."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU Memory Manager Unit library instance for DXE modules."
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Page.h b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Page.h
new file mode 100644
index 0000000000..ad8f751ad7
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Page.h
@@ -0,0 +1,279 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Pgd or Pgd or PGD - Page Global Directory
+ - Pud or Pud or PUD - Page Upper Directory
+ - Pmd or Pmd or PMD - Page Middle Directory
+ - Pte or pte or PTE - Page Table Entry
+ - Val or VAL or val - Value
+ - Dir - Directory
+**/
+
+#ifndef PAGE_H_
+#define PAGE_H_
+
+#include <Library/CpuMmuLib.h>
+
+#define MAX_VA_BITS 47
+#define PGD_WIDE (8)
+#define PUD_WIDE (9)
+#define PMD_WIDE (9)
+#define PTE_WIDE (9)
+
+#define ENTRYS_PER_PGD (1 << PGD_WIDE)
+#define ENTRYS_PER_PUD (1 << PUD_WIDE)
+#define ENTRYS_PER_PMD (1 << PMD_WIDE)
+#define ENTRYS_PER_PTE (1 << PTE_WIDE)
+
+#define PGD_SHIFT (PUD_SHIFT + PUD_WIDE)
+#define PUD_SHIFT (PMD_SHIFT + PMD_WIDE)
+#define PMD_SHIFT (EFI_PAGE_SHIFT + PTE_WIDE)
+#define PTE_SHIFT (EFI_PAGE_SHIFT)
+
+#define PGD_SIZE (1UL << PGD_SHIFT)
+#define PUD_SIZE (1UL << PUD_SHIFT)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+
+#define PGD_MASK (~(PGD_SIZE-1))
+#define PUD_MASK (~(PUD_SIZE-1))
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PAGE_MASK (~(EFI_PAGE_SIZE - 1))
+#define PFN_MASK (~(((UINTN)(1) << (EFI_PAGE_SHIFT)) - 1) & \
+ (((UINTN)(1) << (PAGE_PFN_END_SHIFT)) - 1))
+
+#define HUGEP_PAGE_MASK (~(((UINTN)(1) << (PMD_SHIFT)) - 1) & \
+ (((UINTN)(1) << (PAGE_PFN_END_SHIFT)) - 1))
+
+#define INVALID_PAGE 0
+
+typedef struct {
+ UINTN PgdVal;
+} PGD;
+typedef struct {
+ UINTN PudVal;
+} PUD;
+typedef struct {
+ UINTN PmdVal;
+} PMD;
+typedef struct {
+ UINTN PteVal;
+} PTE;
+
+/**
+ Gets the value of the page global directory table entry.
+
+ @param x Page global directory struct variables.
+
+ @retval the value of the page global directory table entry.
+ **/
+#define PGD_VAL(x) ((x).PgdVal)
+
+/**
+ Gets the value of the page upper directory table entry.
+
+ @param x Page upper directory struct variables.
+
+ @retval the value of the page upper directory table entry.
+ **/
+#define PUD_VAL(x) ((x).PudVal)
+
+/**
+ Gets the value of the page middle directory table entry.
+
+ @param x Page middle directory struct variables.
+
+ @retval the value of the page middle directory table entry.
+ **/
+#define PMD_VAL(x) ((x).PmdVal)
+
+/**
+ Gets the value of the page table entry.
+
+ @param x Page table entry struct variables.
+
+ @retval the value of the page table entry.
+ **/
+#define PTE_VAL(x) ((x).PteVal)
+
+#define PGD_TABLE_SIZE (ENTRYS_PER_PGD * sizeof(PGD))
+#define PUD_TABLE_SIZE (ENTRYS_PER_PUD * sizeof(PUD))
+#define PMD_TABLE_SIZE (ENTRYS_PER_PMD * sizeof(PMD))
+#define PTE_TABLE_SIZE (ENTRYS_PER_PTE * sizeof(PTE))
+
+/**
+ Gets the physical address of the record in the page table entry.
+
+ @param x Page table entry struct variables.
+
+ @retval the value of the physical address.
+ **/
+#define GET_PAGE_ATTRIBUTES(x) (UINTN) {(PTE_VAL(x) & ~PFN_MASK)}
+
+/**
+ Gets the virtual address of the next block of the specified virtual address
+ that is aligned with the size of the global page directory mapping.
+
+ @param Address Specifies the virtual address.
+ @param End The end address of the memory region.
+
+ @retval the specified virtual address of the next block.
+ **/
+#define PGD_ADDRESS_END(Address, End) \
+({ \
+ UINTN Boundary = ((Address) + PGD_SIZE) & PGD_MASK; \
+ (Boundary - 1 < (End) - 1)? Boundary: (End); \
+})
+
+/**
+ Gets the virtual address of the next block of the specified virtual address
+ that is aligned with the size of the page upper directory mapping.
+
+ @param Address Specifies the virtual address.
+ @param End The end address of the memory region.
+
+ @retval the specified virtual address of the next block.
+ **/
+#define PUD_ADDRESS_END(Address, End) \
+({ \
+ UINTN Boundary = ((Address) + PUD_SIZE) & PUD_MASK; \
+ (Boundary - 1 < (End) - 1)? Boundary: (End); \
+})
+
+/**
+ Gets the virtual address of the next block of the specified virtual address
+ that is aligned with the size of the page middle directory mapping.
+
+ @param Address Specifies the virtual address.
+ @param End The end address of the memory region.
+
+ @retval the specified virtual address of the next block.
+ **/
+#define PMD_ADDRESS_END(Address, End) \
+({ \
+ UINTN Boundary = ((Address) + PMD_SIZE) & PMD_MASK; \
+ (Boundary - 1 < (End) - 1)? Boundary: (End); \
+})
+
+/**
+ Get Specifies the virtual address corresponding to the index of the page global directory table entry.
+
+ @param Address Specifies the virtual address.
+
+ @retval the index of the page global directory table entry.
+ **/
+#define PGD_INDEX(Address) (((Address) >> PGD_SHIFT) & (ENTRYS_PER_PGD-1))
+
+/**
+ Get Specifies the virtual address corresponding to the index of the page upper directory table entry.
+
+ @param Address Specifies the virtual address.
+ @param End The end address of the memory region.
+
+ @retval the index of the page upper directory table entry.
+ **/
+#define PUD_INDEX(Address) (((Address) >> PUD_SHIFT) & (ENTRYS_PER_PUD - 1))
+
+/**
+ Get Specifies the virtual address corresponding to the index of the page middle directory table entry.
+
+ @param Address Specifies the virtual address.
+
+ @retval the index of the page middle directory table entry.
+ **/
+#define PMD_INDEX(Address) (((Address) >> PMD_SHIFT) & (ENTRYS_PER_PMD - 1))
+
+/**
+ Get Specifies the virtual address corresponding to the index of the page table entry.
+
+ @param Address Specifies the virtual address.
+
+ @retval the index of the page table entry.
+ **/
+#define PTE_INDEX(Address) (((Address) >> EFI_PAGE_SHIFT) & (ENTRYS_PER_PTE - 1))
+
+/**
+ Calculates the value of the page table entry based on the specified virtual address and properties.
+
+ @param Address Specifies the virtual address.
+ @param Attributes Specifies the Attributes.
+
+ @retval the value of the page table entry.
+ **/
+#define MAKE_PTE(Address, Attributes) (PTE){((((Address) >> EFI_PAGE_SHIFT) << 12) | (Attributes))}
+
+/**
+ Get Global bit from Attributes
+
+ @param Attributes Specifies the Attributes.
+ * */
+#define GET_GLOBALBIT(Attributes) ((Attributes & PAGE_GLOBAL) >> PAGE_GLOBAL_SHIFT)
+
+/**
+ Calculates the value of the Huge page table entry based on the specified virtual address and properties.
+
+ @param Address Specifies the virtual address.
+ @param Attributes Specifies the Attributes.
+
+ @retval the value of the HUGE page table entry.
+ **/
+#define MAKE_HUGE_PTE(Address, Attributes) (PTE){(((((Address) >> PMD_SHIFT) << PMD_SHIFT) | \
+ ((Attributes) | (GET_GLOBALBIT(Attributes) << PAGE_HGLOBAL_SHIFT) | \
+ PAGE_HUGE)))}
+
+/**
+ Check whether the large page table entry is.
+
+ @param Val The value of the page table entry.
+
+ @retval 1 Is huge page table entry.
+ @retval 0 Isn't huge page table entry.
+**/
+#define IS_HUGE_PAGE(Val) ((((Val) & PAGE_HUGE) == PAGE_HUGE) && \
+ (((Val) & PAGE_HGLOBAL) == PAGE_HGLOBAL))
+
+#define HUGE_PAGE_SIZE (PMD_SIZE)
+
+/**
+ Check that the global page directory table entry is empty.
+
+ @param pgd the global page directory struct variables.
+
+ @retval 1 The page table is invalid.
+ @retval 0 The page table is valid.
+**/
+#define PGD_IS_EMPTY(Val) (PGD_VAL(Val) == INVALID_PAGE)
+
+/**
+ Check that the page upper directory table entry is empty.
+
+ @param pud Page upper directory struct variables.
+
+ @retval 1 The page table is invalid.
+ @retval 0 The page table is valid.
+**/
+#define PUD_IS_EMPTY(Val) (PUD_VAL(Val) == INVALID_PAGE)
+
+/**
+ Check that the page middle directory table entry is empty.
+
+ @param pmd Page middle directory struct variables.
+
+ @retval 1 The page table is invalid.
+ @retval 0 The page table is valid.
+**/
+#define PMD_IS_EMPTY(Val) (PMD_VAL(Val) == INVALID_PAGE)
+
+/**
+ Check that the page the page table entry is empty.
+
+ @param pte Page table entry struct variables.
+
+ @retval 1 The page table is invalid.
+ @retval 0 The page table is valid.
+**/
+#define PTE_IS_EMPTY(Val) (!(PTE_VAL(Val) & (~PAGE_VALID)))
+#endif // PAGE_H_
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.c b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.c
new file mode 100644
index 0000000000..227caa19ea
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.c
@@ -0,0 +1,165 @@
+/** @file
+ CPU Memory Map Unit PEI phase driver.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Tlb - Translation Lookaside Buffer
+**/
+
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/CpuMmuLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/CpuMmuLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+#include "Page.h"
+#include "Tlb.h"
+#include "CommonMmuLib.h"
+
+/**
+ Create a page table and initialize the memory management unit(MMU).
+
+ @param[in] MemoryTable A pointer to a memory ragion table.
+ @param[out] TranslationTableBase A pointer to a translation table base address.
+ @param[in, out] TranslationTableSize A pointer to a translation table base size.
+
+ @retval EFI_SUCCESS Configure MMU successfully.
+ EFI_INVALID_PARAMETER MemoryTable is NULL.
+ EFI_UNSUPPORTED Out of memory space or size not aligned.
+**/
+EFI_STATUS
+EFIAPI
+ConfigureMemoryManagementUint (
+ IN MEMORY_REGION_DESCRIPTOR *MemoryTable,
+ OUT VOID **TranslationTableBase OPTIONAL,
+ IN OUT UINTN *TranslationTableSize OPTIONAL
+ )
+{
+ PGD *SwapperPageDir;
+ UINTN PgdShift;
+ UINTN PgdWide;
+ UINTN PudShift;
+ UINTN PudWide;
+ UINTN PmdShift;
+ UINTN PmdWide;
+ UINTN PteShift;
+ UINTN PteWide;
+ UINTN Length;
+ UINTN TlbReEntry;
+ UINTN TlbReEntryOffset;
+ RETURN_STATUS PcdStatus;
+
+ SwapperPageDir = NULL;
+ PgdShift = PGD_SHIFT;
+ PgdWide = PGD_WIDE;
+ PudShift = PUD_SHIFT;
+ PudWide = PUD_WIDE;
+ PmdShift = PMD_SHIFT;
+ PmdWide = PMD_WIDE;
+ PteShift = PTE_SHIFT;
+ PteWide = PTE_WIDE;
+
+ if (MemoryTable == NULL) {
+ ASSERT (MemoryTable != NULL);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ SwapperPageDir = AllocatePages (EFI_SIZE_TO_PAGES (PGD_TABLE_SIZE));
+ ZeroMem (SwapperPageDir, PGD_TABLE_SIZE);
+
+ if (SwapperPageDir == NULL) {
+ goto FreeTranslationTable;
+ }
+
+ CsrWrite (LOONGARCH_CSR_PGDL, (UINTN)SwapperPageDir);
+
+ while (((*TranslationTableSize)--) != 0) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a %d VirtualBase %p VirtualEnd %p Attributes %p .\n",
+ __func__,
+ __LINE__,
+ MemoryTable->VirtualBase,
+ (MemoryTable->Length + MemoryTable->VirtualBase),
+ MemoryTable->Attributes
+ ));
+
+ PcdStatus = FillTranslationTable (MemoryTable);
+ if (EFI_ERROR (PcdStatus)) {
+ goto FreeTranslationTable;
+ }
+
+ MemoryTable++;
+ }
+
+ //
+ // TLB Re-entry address at the end of exception vector, a vector is up to 512 bytes,
+ // so the starting address is: total exception vector size + total interrupt vector size + base.
+ // The total size of TLB handler and exception vector size and interrupt vector size should not
+ // be lager than 64KB.
+ //
+ Length = (UINTN)HandleTlbRefillEnd - (UINTN)HandleTlbRefillStart;
+ TlbReEntryOffset = (MAX_LOONGARCH_EXCEPTION + MAX_LOONGARCH_INTERRUPT) * 512;
+ TlbReEntry = PcdGet64 (PcdCpuExceptionVectorBaseAddress) + TlbReEntryOffset;
+ if ((TlbReEntryOffset + Length) > SIZE_64KB) {
+ goto FreeTranslationTable;
+ }
+
+ //
+ // Make sure TLB refill exception base address alignment is greater than or equal to 4KB and valid
+ //
+ if (TlbReEntry & (SIZE_4KB - 1)) {
+ goto FreeTranslationTable;
+ }
+
+ CopyMem ((VOID *)TlbReEntry, HandleTlbRefillStart, Length);
+ InvalidateInstructionCacheRange ((VOID *)(UINTN)HandleTlbRefillStart, Length);
+
+ DEBUG ((
+ DEBUG_INFO,
+ "%a %d PteShift %d PteWide %d PmdShift %d PmdWide %d PudShift %d PudWide %d PgdShift %d PgdWide %d.\n",
+ __func__,
+ __LINE__,
+ PteShift,
+ PteWide,
+ PmdShift,
+ PmdWide,
+ PudShift,
+ PudWide,
+ PgdShift,
+ PgdWide
+ ));
+
+ //
+ // Set the address of TLB refill exception handler
+ //
+ SetTlbRebaseAddress ((UINTN)TlbReEntry);
+
+ //
+ // Set page size
+ //
+ CsrXChg (LOONGARCH_CSR_TLBIDX, (DEFAULT_PAGE_SIZE << CSR_TLBIDX_SIZE), CSR_TLBIDX_SIZE_MASK);
+ CsrWrite (LOONGARCH_CSR_STLBPGSIZE, DEFAULT_PAGE_SIZE);
+ CsrXChg (LOONGARCH_CSR_TLBREHI, (DEFAULT_PAGE_SIZE << CSR_TLBREHI_PS_SHIFT), CSR_TLBREHI_PS);
+
+ CsrWrite (LOONGARCH_CSR_PWCTL0, (PteShift | PteWide << 5 | PmdShift << 10 | PmdWide << 15 | PudShift << 20 | PudWide << 25));
+ CsrWrite (LOONGARCH_CSR_PWCTL1, (PgdShift | PgdWide << 6));
+
+ DEBUG ((DEBUG_INFO, "%a %d Enable Mmu Start PageBassAddress %p.\n", __func__, __LINE__, SwapperPageDir));
+
+ return EFI_SUCCESS;
+
+FreeTranslationTable:
+ if (SwapperPageDir != NULL) {
+ FreePages (SwapperPageDir, EFI_SIZE_TO_PAGES (PGD_TABLE_SIZE));
+ }
+
+ return EFI_UNSUPPORTED;
+}
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
new file mode 100644
index 0000000000..e746c3b1a7
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
@@ -0,0 +1,44 @@
+## @file
+# CPU Memory Map Unit PEI phase driver.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiCpuMmuLib
+ MODULE_UNI_FILE = PeiCpuMmuLib.uni
+ FILE_GUID = F67EB983-AC2A-7550-AB69-3BC51A1C895B
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = CpuMmuLib | SEC PEIM
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ TlbOperation.S | GCC
+ PeiCpuMmuLib.c
+ CommonMmuLib.c
+ CommonMmuLib.h
+ Tlb.h
+ Page.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[PCD]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress
+
+[LibraryClasses]
+ MemoryAllocationLib
+ CacheMaintenanceLib
+ PcdLib
+ DebugLib
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.uni b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.uni
new file mode 100644
index 0000000000..331500543c
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.uni
@@ -0,0 +1,14 @@
+// /** @file
+// CPU Memory Manager Unit library instance for PEI modules.
+//
+// CPU Memory Manager Unit library instance for PEI modules.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU Memory Manager Unit library instance for PEI modules."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU Memory Manager Unit library instance for PEI modules."
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Tlb.h b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Tlb.h
new file mode 100644
index 0000000000..5d3f80fe34
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/Tlb.h
@@ -0,0 +1,48 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef TLB_H_
+#define TLB_H_
+
+/**
+ Invalid corresponding TLB entries are based on the address given
+
+ @param Address The address corresponding to the invalid page table entry
+
+ @retval none
+**/
+VOID
+InvalidTlb (
+ UINTN Address
+ );
+
+/**
+ TLB refill handler start.
+
+ @param none
+
+ @retval none
+**/
+VOID
+HandleTlbRefillStart (
+ VOID
+ );
+
+/**
+ TLB refill handler end.
+
+ @param none
+
+ @retval none
+**/
+VOID
+HandleTlbRefillEnd (
+ VOID
+ );
+
+#endif // TLB_H_
diff --git a/UefiCpuPkg/Library/LoongArch64CpuMmuLib/TlbOperation.S b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/TlbOperation.S
new file mode 100644
index 0000000000..e446f0839c
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64CpuMmuLib/TlbOperation.S
@@ -0,0 +1,44 @@
+#------------------------------------------------------------------------------
+#
+# TLB operation functions
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#-----------------------------------------------------------------------------
+
+#include <Register/LoongArch64/Csr.h>
+
+ASM_GLOBAL ASM_PFX(HandleTlbRefillStart)
+ASM_GLOBAL ASM_PFX(HandleTlbRefillEnd)
+ASM_GLOBAL ASM_PFX(InvalidTlb)
+
+#
+# Refill the page table.
+# @param VOID
+# @retval VOID
+#
+ASM_PFX(HandleTlbRefillStart):
+ csrwr $t0, LOONGARCH_CSR_TLBRSAVE
+ csrrd $t0, LOONGARCH_CSR_PGD
+ lddir $t0, $t0, 3 #Put pud BaseAddress into T0
+ lddir $t0, $t0, 2 #Put pmd BaseAddress into T0
+ lddir $t0, $t0, 1 #Put pte BaseAddress into T0
+ ldpte $t0, 0
+ ldpte $t0, 1
+ tlbfill // refill hi,lo0,lo1
+ csrrd $t0, LOONGARCH_CSR_TLBRSAVE
+ ertn
+ASM_PFX(HandleTlbRefillEnd):
+
+#
+# Invalid corresponding TLB entries are based on the address given
+# @param a0 The address corresponding to the invalid page table entry
+# @retval none
+#
+ASM_PFX(InvalidTlb):
+ invtlb INVTLB_ADDR_GTRUE_OR_ASID, $zero, $a0
+ jirl $zero, $ra, 0
+
+ .end
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index 872f20fc36..709992d327 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -209,6 +209,8 @@
UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
+ UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110716): https://edk2.groups.io/g/devel/message/110716
Mute This Topic: https://groups.io/mt/102413868/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 13/30] UefiCpuPkg: Add multiprocessor library for LoongArch64
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (11 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 12/30] UefiCpuPkg: Add LoongArch64CpuMmuLib " Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 14/30] UefiCpuPkg: Add CpuDxe driver " Chao Li
` (19 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel; +Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann
Added a new library named LoongArch64MpInitLib.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
.../LoongArch64MpInitLib/DxeMpInitLib.inf | 45 +
.../LoongArch64MpInitLib/DxeMpInitLib.uni | 15 +
.../Library/LoongArch64MpInitLib/DxeMpLib.c | 481 +++++
.../Library/LoongArch64MpInitLib/MpLib.c | 1596 +++++++++++++++++
.../Library/LoongArch64MpInitLib/MpLib.h | 361 ++++
.../LoongArch64MpInitLib/PeiMpInitLib.inf | 37 +
.../LoongArch64MpInitLib/PeiMpInitLib.uni | 15 +
.../Library/LoongArch64MpInitLib/PeiMpLib.c | 404 +++++
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
9 files changed, 2956 insertions(+)
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpLib.c
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.c
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.h
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.uni
create mode 100644 UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpLib.c
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
new file mode 100644
index 0000000000..48086ce0a3
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
@@ -0,0 +1,45 @@
+## @file
+# LoongArch64 MP initialize support functions for DXE phase.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeMpInitLib
+ MODULE_UNI_FILE = DxeMpInitLib.uni
+ FILE_GUID = C3B9ACAA-B67C-D3E0-E70D-7982B6EA2931
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.1
+ LIBRARY_CLASS = MpInitLib|DXE_DRIVER
+
+[Sources.common]
+ DxeMpLib.c
+ MpLib.c
+ MpLib.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ MemoryAllocationLib
+ HobLib
+ CpuLib
+ UefiBootServicesTableLib
+ DebugAgentLib
+ SynchronizationLib
+ TimerLib
+
+[Protocols]
+ gEfiTimerArchProtocolGuid ## SOMETIMES_CONSUMES
+
+[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuApInitTimeOutInMicroSeconds ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuApStatusCheckIntervalInMicroSeconds ## CONSUMES
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.uni b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.uni
new file mode 100644
index 0000000000..aebbdbbb0e
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// MP Initialize Library instance for DXE driver.
+//
+// MP Initialize Library instance for DXE driver.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "MP Initialize Library instance for DXE driver."
+
+#string STR_MODULE_DESCRIPTION #language en-US "MP Initialize Library instance for DXE driver."
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpLib.c
new file mode 100644
index 0000000000..008016b225
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpLib.c
@@ -0,0 +1,481 @@
+/** @file
+ LoongArch64 MP initialize support functions for DXE phase.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "MpLib.h"
+
+#include <Library/UefiLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugAgentLib.h>
+#include <Library/DxeServicesTableLib.h>
+
+#include <Protocol/Timer.h>
+
+CPU_MP_DATA *mCpuMpData = NULL;
+EFI_EVENT mCheckAllApsEvent = NULL;
+volatile BOOLEAN mStopCheckAllApsStatus = TRUE;
+
+/**
+ Enable Debug Agent to support source debugging on AP function.
+
+**/
+VOID
+EnableDebugAgent (
+ VOID
+ )
+{
+ //
+ // Initialize Debug Agent to support source level debug in DXE phase
+ //
+ InitializeDebugAgent (DEBUG_AGENT_INIT_DXE_AP, NULL, NULL);
+}
+
+/**
+ Get the pointer to CPU MP Data structure.
+
+ @return The pointer to CPU MP Data structure.
+**/
+CPU_MP_DATA *
+GetCpuMpData (
+ VOID
+ )
+{
+ ASSERT (mCpuMpData != NULL);
+ return mCpuMpData;
+}
+
+/**
+ Save the pointer to CPU MP Data structure.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure will be saved.
+**/
+VOID
+SaveCpuMpData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ mCpuMpData = CpuMpData;
+}
+
+/**
+ Get available EfiBootServicesCode memory below 4GB by specified size.
+
+ This buffer is required to safely transfer AP from real address mode to
+ protected mode or long mode, due to the fact that the buffer returned by
+ GetWakeupBuffer() may be marked as non-executable.
+
+ @param[in] BufferSize Wakeup transition buffer size.
+
+ @retval other Return wakeup transition buffer address below 4GB.
+ @retval 0 Cannot find free memory below 4GB.
+**/
+UINTN
+GetModeTransitionBuffer (
+ IN UINTN BufferSize
+ )
+{
+ return 0;
+}
+
+/**
+ Checks APs status and updates APs status if needed.
+
+**/
+VOID
+CheckAndUpdateApsStatus (
+ VOID
+ )
+{
+ UINTN ProcessorNumber;
+ EFI_STATUS Status;
+ CPU_MP_DATA *CpuMpData;
+
+ CpuMpData = GetCpuMpData ();
+
+ //
+ // First, check whether pending StartupAllAPs() exists.
+ //
+ if (CpuMpData->WaitEvent != NULL) {
+ Status = CheckAllAPs ();
+ //
+ // If all APs finish for StartupAllAPs(), signal the WaitEvent for it.
+ //
+ if (Status != EFI_NOT_READY) {
+ Status = gBS->SignalEvent (CpuMpData->WaitEvent);
+ CpuMpData->WaitEvent = NULL;
+ }
+ }
+
+ //
+ // Second, check whether pending StartupThisAPs() callings exist.
+ //
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
+ if (CpuMpData->CpuData[ProcessorNumber].WaitEvent == NULL) {
+ continue;
+ }
+
+ Status = CheckThisAP (ProcessorNumber);
+
+ if (Status != EFI_NOT_READY) {
+ gBS->SignalEvent (CpuMpData->CpuData[ProcessorNumber].WaitEvent);
+ CpuMpData->CpuData[ProcessorNumber].WaitEvent = NULL;
+ }
+ }
+}
+
+/**
+ Checks APs' status periodically.
+
+ This function is triggered by timer periodically to check the
+ state of APs for StartupAllAPs() and StartupThisAP() executed
+ in non-blocking mode.
+
+ @param[in] Event Event triggered.
+ @param[in] Context Parameter passed with the event.
+
+**/
+VOID
+EFIAPI
+CheckApsStatus (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ //
+ // If CheckApsStatus() is not stopped, otherwise return immediately.
+ //
+ if (!mStopCheckAllApsStatus) {
+ CheckAndUpdateApsStatus ();
+ }
+}
+
+/**
+ Initialize global data for MP support.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+InitMpGlobalData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ EFI_STATUS Status;
+
+ SaveCpuMpData (CpuMpData);
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ CheckApsStatus,
+ NULL,
+ &mCheckAllApsEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Set timer to check all APs status.
+ //
+ Status = gBS->SetTimer (
+ mCheckAllApsEvent,
+ TimerPeriodic,
+ EFI_TIMER_PERIOD_MICROSECONDS (
+ PcdGet32 (PcdCpuApStatusCheckIntervalInMicroSeconds)
+ )
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+/**
+ This service executes a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MPInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Initialization
+ library, and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupAllAPs (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Temporarily stop checkAllApsStatus for avoid resource dead-lock.
+ //
+ mStopCheckAllApsStatus = TRUE;
+
+ Status = StartupAllCPUsWorker (
+ Procedure,
+ SingleThread,
+ TRUE,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ FailedCpuList
+ );
+
+ //
+ // Start checkAllApsStatus
+ //
+ mStopCheckAllApsStatus = FALSE;
+
+ return Status;
+}
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function.
+
+ @param[in] Procedure A pointer to the function to be run on the
+ designated AP of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until this AP finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on this AP,
+ and go on executing immediately. If this AP
+ return from Procedure or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ this AP to finish this Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ this AP returns from Procedure, then Procedure
+ on the AP is terminated. The
+ AP is available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MpInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure on the
+ specified AP.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupThisAP (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // temporarily stop checkAllApsStatus for avoid resource dead-lock.
+ //
+ mStopCheckAllApsStatus = TRUE;
+
+ Status = StartupThisAPWorker (
+ Procedure,
+ ProcessorNumber,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ Finished
+ );
+
+ mStopCheckAllApsStatus = FALSE;
+
+ return Status;
+}
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibSwitchBSP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ @param[in] ProcessorNumber The handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibEnableDisableAP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.c b/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.c
new file mode 100644
index 0000000000..864c1464be
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.c
@@ -0,0 +1,1596 @@
+/** @file
+ LoongArch64 CPU MP Initialize Library common functions.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "MpLib.h"
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include <Uefi/UefiBaseType.h>
+
+EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
+EFI_GUID mProcessorResourceHobGuid = PROCESSOR_RESOURCE_HOB_GUID;
+
+/**
+ Get the Application Processors state.
+
+ @param[in] CpuData The pointer to CPU_AP_DATA of specified AP
+
+ @return The AP status
+**/
+CPU_STATE
+GetApState (
+ IN CPU_AP_DATA *CpuData
+ )
+{
+ return CpuData->State;
+}
+
+/**
+ Set the Application Processors state.
+
+ @param[in] CpuData The pointer to CPU_AP_DATA of specified AP
+ @param[in] State The AP status
+**/
+VOID
+SetApState (
+ IN CPU_AP_DATA *CpuData,
+ IN CPU_STATE State
+ )
+{
+ AcquireSpinLock (&CpuData->ApLock);
+ CpuData->State = State;
+ ReleaseSpinLock (&CpuData->ApLock);
+}
+
+/**
+ Get APIC ID of the executing processor.
+
+ @return 32-bit APIC ID of the executing processor.
+**/
+UINT32
+GetApicId (
+ VOID
+ )
+{
+ UINTN CpuNum;
+
+ CpuNum = CsrRead (LOONGARCH_CSR_CPUNUM);
+
+ return CpuNum & 0x3ff;
+}
+
+/**
+ Find the current Processor number by APIC ID.
+
+ @param[in] CpuMpData Pointer to PEI CPU MP Data
+ @param[out] ProcessorNumber Return the pocessor number found
+
+ @retval EFI_SUCCESS ProcessorNumber is found and returned.
+ @retval EFI_NOT_FOUND ProcessorNumber is not found.
+**/
+EFI_STATUS
+GetProcessorNumber (
+ IN CPU_MP_DATA *CpuMpData,
+ OUT UINTN *ProcessorNumber
+ )
+{
+ UINTN TotalProcessorNumber;
+ UINTN Index;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+
+ TotalProcessorNumber = CpuMpData->CpuCount;
+ for (Index = 0; Index < TotalProcessorNumber; Index++) {
+ if (CpuInfoInHob[Index].ApicId == GetApicId ()) {
+ *ProcessorNumber = Index;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Sort the APIC ID of all processors.
+
+ This function sorts the APIC ID of all processors so that processor number is
+ assigned in the ascending order of APIC ID which eases MP debugging.
+
+ @param[in] CpuMpData Pointer to PEI CPU MP Data
+**/
+VOID
+SortApicId (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ UINTN Index1;
+ UINTN Index2;
+ UINTN Index3;
+ UINT32 ApicId;
+ CPU_INFO_IN_HOB CpuInfo;
+ UINT32 ApCount;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+ volatile UINT32 *StartupApSignal;
+
+ ApCount = CpuMpData->CpuCount - 1;
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+ if (ApCount != 0) {
+ for (Index1 = 0; Index1 < ApCount; Index1++) {
+ Index3 = Index1;
+ //
+ // Sort key is the hardware default APIC ID
+ //
+ ApicId = CpuInfoInHob[Index1].ApicId;
+ for (Index2 = Index1 + 1; Index2 <= ApCount; Index2++) {
+ if (ApicId > CpuInfoInHob[Index2].ApicId) {
+ Index3 = Index2;
+ ApicId = CpuInfoInHob[Index2].ApicId;
+ }
+ }
+
+ if (Index3 != Index1) {
+ CopyMem (&CpuInfo, &CpuInfoInHob[Index3], sizeof (CPU_INFO_IN_HOB));
+ CopyMem (
+ &CpuInfoInHob[Index3],
+ &CpuInfoInHob[Index1],
+ sizeof (CPU_INFO_IN_HOB)
+ );
+ CopyMem (&CpuInfoInHob[Index1], &CpuInfo, sizeof (CPU_INFO_IN_HOB));
+
+ //
+ // Also exchange the StartupApSignal.
+ //
+ StartupApSignal = CpuMpData->CpuData[Index3].StartupApSignal;
+ CpuMpData->CpuData[Index3].StartupApSignal =
+ CpuMpData->CpuData[Index1].StartupApSignal;
+ CpuMpData->CpuData[Index1].StartupApSignal = StartupApSignal;
+ }
+ }
+
+ //
+ // Get the processor number for the BSP
+ //
+ ApicId = GetApicId ();
+ for (Index1 = 0; Index1 < CpuMpData->CpuCount; Index1++) {
+ if (CpuInfoInHob[Index1].ApicId == ApicId) {
+ CpuMpData->BspNumber = (UINT32)Index1;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ Get pointer to Processor Resource Data structure from GUIDd HOB.
+
+ @return The pointer to Processor Resource Data structure.
+**/
+PROCESSOR_RESOURCE_DATA *
+GetProcessorResourceDataFromGuidedHob (
+ VOID
+ )
+{
+ EFI_HOB_GUID_TYPE *GuidHob;
+ VOID *DataInHob;
+ PROCESSOR_RESOURCE_DATA *ResourceData;
+
+ ResourceData = NULL;
+ GuidHob = GetFirstGuidHob (&mProcessorResourceHobGuid);
+ if (GuidHob != NULL) {
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ ResourceData = (PROCESSOR_RESOURCE_DATA *)(*(UINTN *)DataInHob);
+ }
+
+ return ResourceData;
+}
+
+/**
+ This function will get CPU count in the system.
+
+ @param[in] CpuMpData Pointer to PEI CPU MP Data
+
+ @return CPU count detected
+**/
+UINTN
+CollectProcessorCount (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ PROCESSOR_RESOURCE_DATA *ProcessorResourceData;
+
+ ProcessorResourceData = NULL;
+
+ //
+ // Set the default loop mode for APs.
+ //
+ CpuMpData->ApLoopMode = ApInRunLoop;
+
+ //
+ // Beacuse LoongArch does not have SIPI now, the APIC ID must be obtained before
+ // calling IPI to wake up the APs. If NULL is obtained, NODE0 Core0 Mailbox0 is used
+ // as the first broadcast method to wake up all APs, and all of APs will read NODE0
+ // Core0 Mailbox0 in an infinit loop.
+ //
+ ProcessorResourceData = GetProcessorResourceDataFromGuidedHob ();
+
+ if (ProcessorResourceData != NULL) {
+ CpuMpData->ApLoopMode = ApInHltLoop;
+ CpuMpData->CpuCount = ProcessorResourceData->CpuCount;
+ CpuMpData->CpuInfoInHob = (UINTN)(ProcessorResourceData->CpuInfoInHob);
+ }
+
+ //
+ // Send 1st broadcast IPI to APs to wakeup APs
+ //
+ CpuMpData->InitFlag = ApInitConfig;
+ WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL, FALSE);
+ CpuMpData->InitFlag = ApInitDone;
+
+ //
+ // When InitFlag == ApInitConfig, WakeUpAP () guarantees all APs are checked in.
+ // FinishedCount is the number of check-in APs.
+ //
+ CpuMpData->CpuCount = CpuMpData->FinishedCount + 1;
+ ASSERT (CpuMpData->CpuCount <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));
+
+ //
+ // Wait for all APs finished the initialization
+ //
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
+ CpuPause ();
+ }
+
+ //
+ // Sort BSP/Aps by CPU APIC ID in ascending order
+ //
+ SortApicId (CpuMpData);
+
+ DEBUG ((DEBUG_INFO, "MpInitLib: Find %d processors in system.\n", CpuMpData->CpuCount));
+
+ return CpuMpData->CpuCount;
+}
+
+/**
+ Initialize CPU AP Data when AP is wakeup at the first time.
+
+ @param[in, out] CpuMpData Pointer to PEI CPU MP Data
+ @param[in] ProcessorNumber The handle number of processor
+ @param[in] BistData Processor BIST data
+
+**/
+VOID
+InitializeApData (
+ IN OUT CPU_MP_DATA *CpuMpData,
+ IN UINTN ProcessorNumber,
+ IN UINT32 BistData
+ )
+{
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)(CpuMpData->CpuInfoInHob);
+
+ CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();
+ CpuInfoInHob[ProcessorNumber].Health = BistData;
+
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;
+ CpuMpData->CpuData[ProcessorNumber].CpuHealthy = (BistData == 0) ? TRUE : FALSE;
+
+ InitializeSpinLock (&CpuMpData->CpuData[ProcessorNumber].ApLock);
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
+}
+
+/**
+ Ap wake up function.
+
+ Ap will wait for scheduling here, and if the IPI or wake-up signal is enabled,
+ Ap will preform the corresponding functions.
+
+ @param[in] ApIndex Number of current executing AP
+ @param[in] ExchangeInfo Pointer to the MP exchange info buffer
+**/
+VOID
+EFIAPI
+ApWakeupFunction (
+ IN UINTN ApIndex,
+ IN MP_CPU_EXCHANGE_INFO *ExchangeInfo
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+ UINTN ProcessorNumber;
+ volatile UINT32 *ApStartupSignalBuffer;
+ EFI_AP_PROCEDURE Procedure;
+ VOID *Parameter;
+
+ CpuMpData = ExchangeInfo->CpuMpData;
+
+ while (TRUE) {
+ if (CpuMpData->InitFlag == ApInitConfig) {
+ ProcessorNumber = ApIndex;
+ //
+ // If the AP can running to here, then the BIST must be zero.
+ //
+ InitializeApData (CpuMpData, ProcessorNumber, 0);
+ ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
+ } else {
+ //
+ // Execute AP function if AP is ready
+ //
+ GetProcessorNumber (CpuMpData, &ProcessorNumber);
+
+ //
+ // Clear AP start-up signal when AP waken up
+ //
+ ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
+ InterlockedCompareExchange32 (
+ (UINT32 *)ApStartupSignalBuffer,
+ WAKEUP_AP_SIGNAL,
+ 0
+ );
+
+ //
+ // Invoke AP function here
+ //
+ if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateReady) {
+ Procedure = (EFI_AP_PROCEDURE)CpuMpData->CpuData[ProcessorNumber].ApFunction;
+ Parameter = (VOID *)CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument;
+ if (Procedure != NULL) {
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateBusy);
+ Procedure (Parameter);
+ }
+
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateFinished);
+ }
+ }
+
+ //
+ // Updates the finished count
+ //
+ InterlockedIncrement ((UINT32 *)&CpuMpData->FinishedCount);
+
+ while (TRUE) {
+ //
+ // Clean per-core mail box registers.
+ //
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF0, 0x0);
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF1, 0x0);
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF2, 0x0);
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF3, 0x0);
+
+ //
+ // Enable IPI interrupt and global interrupt
+ //
+ EnableLocalInterrupts (1 << 12);
+ IoCsrWrite32 (LOONGARCH_IOCSR_IPI_EN, 0xFFFFFFFFULL);
+ EnableInterrupts ();
+
+ //
+ // Ap entry HLT mode
+ //
+ CpuSleep ();
+
+ //
+ // Disable global interrupts when wake up
+ //
+ DisableInterrupts ();
+
+ //
+ // Update CpuMpData
+ //
+ if (CpuMpData != ExchangeInfo->CpuMpData) {
+ CpuMpData = ExchangeInfo->CpuMpData;
+ GetProcessorNumber (CpuMpData, &ProcessorNumber);
+ ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
+ }
+
+ //
+ // Break out of the loop if wake up signal is not NULL.
+ //
+ if (*ApStartupSignalBuffer == WAKEUP_AP_SIGNAL) {
+ break;
+ }
+ }
+ }
+}
+
+/**
+ Calculate timeout value and return the current performance counter value.
+
+ Calculate the number of performance counter ticks required for a timeout.
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
+ as infinity.
+
+ @param[in] TimeoutInMicroseconds Timeout value in microseconds.
+ @param[out] CurrentTime Returns the current value of the performance counter.
+
+ @return Expected time stamp counter for timeout.
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
+ as infinity.
+
+**/
+UINT64
+CalculateTimeout (
+ IN UINTN TimeoutInMicroseconds,
+ OUT UINT64 *CurrentTime
+ )
+{
+ UINT64 TimeoutInSeconds;
+ UINT64 TimestampCounterFreq;
+
+ //
+ // Read the current value of the performance counter
+ //
+ *CurrentTime = GetPerformanceCounter ();
+
+ //
+ // If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
+ // as infinity.
+ //
+ if (TimeoutInMicroseconds == 0) {
+ return 0;
+ }
+
+ //
+ // GetPerformanceCounterProperties () returns the timestamp counter's frequency
+ // in Hz.
+ //
+ TimestampCounterFreq = GetPerformanceCounterProperties (NULL, NULL);
+
+ //
+ // Check the potential overflow before calculate the number of ticks for the timeout value.
+ //
+ if (DivU64x64Remainder (MAX_UINT64, TimeoutInMicroseconds, NULL) < TimestampCounterFreq) {
+ //
+ // Convert microseconds into seconds if direct multiplication overflows
+ //
+ TimeoutInSeconds = DivU64x32 (TimeoutInMicroseconds, 1000000);
+ //
+ // Assertion if the final tick count exceeds MAX_UINT64
+ //
+ ASSERT (DivU64x64Remainder (MAX_UINT64, TimeoutInSeconds, NULL) >= TimestampCounterFreq);
+ return MultU64x64 (TimestampCounterFreq, TimeoutInSeconds);
+ } else {
+ //
+ // No overflow case, multiply the return value with TimeoutInMicroseconds and then divide
+ // it by 1,000,000, to get the number of ticks for the timeout value.
+ //
+ return DivU64x32 (
+ MultU64x64 (
+ TimestampCounterFreq,
+ TimeoutInMicroseconds
+ ),
+ 1000000
+ );
+ }
+}
+
+/**
+ Checks whether timeout expires.
+
+ Check whether the number of elapsed performance counter ticks required for
+ a timeout condition has been reached.
+ If Timeout is zero, which means infinity, return value is always FALSE.
+
+ @param[in, out] PreviousTime On input, the value of the performance counter
+ when it was last read.
+ On output, the current value of the performance
+ counter
+ @param[in] TotalTime The total amount of elapsed time in performance
+ counter ticks.
+ @param[in] Timeout The number of performance counter ticks required
+ to reach a timeout condition.
+
+ @retval TRUE A timeout condition has been reached.
+ @retval FALSE A timeout condition has not been reached.
+
+**/
+BOOLEAN
+CheckTimeout (
+ IN OUT UINT64 *PreviousTime,
+ IN UINT64 *TotalTime,
+ IN UINT64 Timeout
+ )
+{
+ UINT64 Start;
+ UINT64 End;
+ UINT64 CurrentTime;
+ INT64 Delta;
+ INT64 Cycle;
+
+ if (Timeout == 0) {
+ return FALSE;
+ }
+
+ GetPerformanceCounterProperties (&Start, &End);
+ Cycle = End - Start;
+ if (Cycle < 0) {
+ Cycle = -Cycle;
+ }
+
+ Cycle++;
+ CurrentTime = GetPerformanceCounter ();
+ Delta = (INT64)(CurrentTime - *PreviousTime);
+ if (Start > End) {
+ Delta = -Delta;
+ }
+
+ if (Delta < 0) {
+ Delta += Cycle;
+ }
+
+ *TotalTime += Delta;
+ *PreviousTime = CurrentTime;
+ if (*TotalTime > Timeout) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ Helper function that waits until the finished AP count reaches the specified
+ limit, or the specified timeout elapses (whichever comes first).
+
+ @param[in] CpuMpData Pointer to CPU MP Data.
+ @param[in] FinishedApLimit The number of finished APs to wait for.
+ @param[in] TimeLimit The number of microseconds to wait for.
+**/
+VOID
+TimedWaitForApFinish (
+ IN CPU_MP_DATA *CpuMpData,
+ IN UINT32 FinishedApLimit,
+ IN UINT32 TimeLimit
+ )
+{
+ //
+ // CalculateTimeout() and CheckTimeout() consider a TimeLimit of 0
+ // "infinity", so check for (TimeLimit == 0) explicitly.
+ //
+ if (TimeLimit == 0) {
+ return;
+ }
+
+ CpuMpData->TotalTime = 0;
+ CpuMpData->ExpectedTime = CalculateTimeout (
+ TimeLimit,
+ &CpuMpData->CurrentTime
+ );
+ while (CpuMpData->FinishedCount < FinishedApLimit &&
+ !CheckTimeout (
+ &CpuMpData->CurrentTime,
+ &CpuMpData->TotalTime,
+ CpuMpData->ExpectedTime
+ ))
+ {
+ CpuPause ();
+ }
+
+ if (CpuMpData->FinishedCount >= FinishedApLimit) {
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: reached FinishedApLimit=%u in %Lu microseconds\n",
+ __FUNCTION__,
+ FinishedApLimit,
+ DivU64x64Remainder (
+ MultU64x32 (CpuMpData->TotalTime, 1000000),
+ GetPerformanceCounterProperties (NULL, NULL),
+ NULL
+ )
+ ));
+ }
+}
+
+/**
+ Wait for AP wakeup and write AP start-up signal till AP is waken up.
+
+ @param[in] ApStartupSignalBuffer Pointer to AP wakeup signal
+**/
+VOID
+WaitApWakeup (
+ IN volatile UINT32 *ApStartupSignalBuffer
+ )
+{
+ //
+ // If AP is waken up, StartupApSignal should be cleared.
+ // Otherwise, write StartupApSignal again till AP waken up.
+ //
+ while (InterlockedCompareExchange32 (
+ (UINT32 *)ApStartupSignalBuffer,
+ WAKEUP_AP_SIGNAL,
+ WAKEUP_AP_SIGNAL
+ ) != 0)
+ {
+ CpuPause ();
+ }
+}
+
+/**
+ This function will fill the exchange info structure.
+
+ @param[in] CpuMpData Pointer to CPU MP Data
+
+**/
+VOID
+FillExchangeInfoData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;
+
+ if (!CpuMpData->MpCpuExchangeInfo) {
+ CpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *)AllocatePool (sizeof (MP_CPU_EXCHANGE_INFO));
+ }
+
+ ExchangeInfo = CpuMpData->MpCpuExchangeInfo;
+ ExchangeInfo->CpuMpData = CpuMpData;
+}
+
+/**
+ This function will be called by BSP to wakeup AP.
+
+ @param[in] CpuMpData Pointer to CPU MP Data
+ @param[in] Broadcast TRUE: Send broadcast IPI to all APs
+ FALSE: Send IPI to AP by ApicId
+ @param[in] ProcessorNumber The handle number of specified processor
+ @param[in] Procedure The function to be invoked by AP
+ @param[in] ProcedureArgument The argument to be passed into AP function
+ @param[in] WakeUpDisabledAps Whether need to wake up disabled APs in broadcast mode. Currently not used on LoongArch.
+**/
+VOID
+WakeUpAP (
+ IN CPU_MP_DATA *CpuMpData,
+ IN BOOLEAN Broadcast,
+ IN UINTN ProcessorNumber,
+ IN EFI_AP_PROCEDURE Procedure OPTIONAL,
+ IN VOID *ProcedureArgument OPTIONAL,
+ IN BOOLEAN WakeUpDisabledAps
+ )
+{
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;
+ UINTN Index;
+ CPU_AP_DATA *CpuData;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+
+ CpuMpData->FinishedCount = 0;
+
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+
+ if (CpuMpData->InitFlag != ApInitDone) {
+ FillExchangeInfoData (CpuMpData);
+ }
+
+ ExchangeInfo = CpuMpData->MpCpuExchangeInfo;
+ //
+ // If InitFlag is ApInitConfig, broadcasts all APs to initize themselves.
+ //
+ if (CpuMpData->InitFlag == ApInitConfig) {
+ DEBUG ((EFI_D_INFO, "%a: func 0x%llx, ExchangeInfo 0x%llx\n", __func__, ApWakeupFunction, (UINTN)ExchangeInfo));
+ if (CpuMpData->ApLoopMode == ApInHltLoop) {
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ if (Index != CpuMpData->BspNumber) {
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_MBUF_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (IOCSR_MBUF_SEND_BOX_HI (0x3) << IOCSR_MBUF_SEND_BOX_SHIFT) |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ ((UINTN)(ExchangeInfo) & IOCSR_MBUF_SEND_H32_MASK))
+ );
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_MBUF_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (IOCSR_MBUF_SEND_BOX_LO (0x3) << IOCSR_MBUF_SEND_BOX_SHIFT) |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ ((UINTN)ExchangeInfo) << IOCSR_MBUF_SEND_BUF_SHIFT)
+ );
+
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_MBUF_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (IOCSR_MBUF_SEND_BOX_HI (0x0) << IOCSR_MBUF_SEND_BOX_SHIFT) |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ ((UINTN)(ApWakeupFunction) & IOCSR_MBUF_SEND_H32_MASK))
+ );
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_MBUF_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (IOCSR_MBUF_SEND_BOX_LO (0x0) << IOCSR_MBUF_SEND_BOX_SHIFT) |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ ((UINTN)ApWakeupFunction) << IOCSR_MBUF_SEND_BUF_SHIFT)
+ );
+
+ //
+ // Send IPI 4 interrupt to wake up APs.
+ //
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_IPI_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ 0x2 // Bit 2
+ )
+ );
+ }
+ }
+ } else {
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF3, (UINTN)ExchangeInfo);
+ IoCsrWrite64 (LOONGARCH_IOCSR_MBUF0, (UINTN)ApWakeupFunction);
+ }
+
+ TimedWaitForApFinish (
+ CpuMpData,
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,
+ PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)
+ );
+ } else {
+ if (Broadcast) {
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ if (Index != CpuMpData->BspNumber) {
+ CpuData = &CpuMpData->CpuData[Index];
+ if ((GetApState (CpuData) == CpuStateDisabled) && !WakeUpDisabledAps) {
+ continue;
+ }
+
+ CpuData->ApFunction = (UINTN)Procedure;
+ CpuData->ApFunctionArgument = (UINTN)ProcedureArgument;
+ SetApState (CpuData, CpuStateReady);
+ *(UINT32 *)CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;
+
+ //
+ // Send IPI 4 interrupt to wake up APs.
+ //
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_IPI_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (CpuInfoInHob[Index].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ 0x2 // Bit 2
+ )
+ );
+ }
+ }
+
+ //
+ // Wait all APs waken up.
+ //
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ CpuData = &CpuMpData->CpuData[Index];
+ if (Index != CpuMpData->BspNumber) {
+ WaitApWakeup (CpuData->StartupApSignal);
+ }
+ }
+ } else {
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+ CpuData->ApFunction = (UINTN)Procedure;
+ CpuData->ApFunctionArgument = (UINTN)ProcedureArgument;
+ SetApState (CpuData, CpuStateReady);
+ //
+ // Wakeup specified AP
+ //
+ *(UINT32 *)CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;
+
+ //
+ // Send IPI 4 interrupt to wake up APs.
+ //
+ IoCsrWrite64 (
+ LOONGARCH_IOCSR_IPI_SEND,
+ (IOCSR_MBUF_SEND_BLOCKING |
+ (CpuInfoInHob[ProcessorNumber].ApicId << IOCSR_MBUF_SEND_CPU_SHIFT) |
+ 0x2 // Bit 2
+ )
+ );
+
+ //
+ // Wait specified AP waken up
+ //
+ WaitApWakeup (CpuData->StartupApSignal);
+ }
+ }
+}
+
+/**
+ Searches for the next waiting AP.
+
+ Search for the next AP that is put in waiting state by single-threaded StartupAllAPs().
+
+ @param[out] NextProcessorNumber Pointer to the processor number of the next waiting AP.
+
+ @retval EFI_SUCCESS The next waiting AP has been found.
+ @retval EFI_NOT_FOUND No waiting AP exists.
+
+**/
+EFI_STATUS
+GetNextWaitingProcessorNumber (
+ OUT UINTN *NextProcessorNumber
+ )
+{
+ UINTN ProcessorNumber;
+ CPU_MP_DATA *CpuMpData;
+
+ CpuMpData = GetCpuMpData ();
+
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {
+ *NextProcessorNumber = ProcessorNumber;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/** Checks status of specified AP.
+
+ This function checks whether the specified AP has finished the task assigned
+ by StartupThisAP(), and whether timeout expires.
+
+ @param[in] ProcessorNumber The handle number of processor.
+
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
+ @retval EFI_TIMEOUT The timeout expires.
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
+**/
+EFI_STATUS
+CheckThisAP (
+ IN UINTN ProcessorNumber
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+ CPU_AP_DATA *CpuData;
+
+ CpuMpData = GetCpuMpData ();
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+
+ //
+ // If the AP finishes for StartupThisAP(), return EFI_SUCCESS.
+ //
+ if (GetApState (CpuData) == CpuStateFinished) {
+ if (CpuData->Finished != NULL) {
+ *(CpuData->Finished) = TRUE;
+ }
+
+ SetApState (CpuData, CpuStateIdle);
+ return EFI_SUCCESS;
+ } else {
+ //
+ // If timeout expires for StartupThisAP(), report timeout.
+ //
+ if (CheckTimeout (&CpuData->CurrentTime, &CpuData->TotalTime, CpuData->ExpectedTime)) {
+ if (CpuData->Finished != NULL) {
+ *(CpuData->Finished) = FALSE;
+ }
+
+ return EFI_TIMEOUT;
+ }
+ }
+
+ return EFI_NOT_READY;
+}
+
+/**
+ Checks status of all APs.
+
+ This function checks whether all APs have finished task assigned by StartupAllAPs(),
+ and whether timeout expires.
+
+ @retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().
+ @retval EFI_TIMEOUT The timeout expires.
+ @retval EFI_NOT_READY APs have not finished task and timeout has not expired.
+**/
+EFI_STATUS
+CheckAllAPs (
+ VOID
+ )
+{
+ UINTN ProcessorNumber;
+ UINTN NextProcessorNumber;
+ EFI_STATUS Status;
+ CPU_MP_DATA *CpuMpData;
+ CPU_AP_DATA *CpuData;
+
+ CpuMpData = GetCpuMpData ();
+
+ NextProcessorNumber = 0;
+
+ //
+ // Go through all APs that are responsible for the StartupAllAPs().
+ //
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
+ if (!CpuMpData->CpuData[ProcessorNumber].Waiting) {
+ continue;
+ }
+
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+ //
+ // Check the CPU state of AP. If it is CpuStateIdle, then the AP has finished its task.
+ // Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the
+ // value of state after setting the it to CpuStateIdle, so BSP can safely make use of its value.
+ //
+ if (GetApState (CpuData) == CpuStateFinished) {
+ CpuMpData->RunningCount--;
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;
+ SetApState (CpuData, CpuStateIdle);
+
+ //
+ // If in Single Thread mode, then search for the next waiting AP for execution.
+ //
+ if (CpuMpData->SingleThread) {
+ Status = GetNextWaitingProcessorNumber (&NextProcessorNumber);
+
+ if (!EFI_ERROR (Status)) {
+ WakeUpAP (
+ CpuMpData,
+ FALSE,
+ (UINT32)NextProcessorNumber,
+ CpuMpData->Procedure,
+ CpuMpData->ProcArguments,
+ TRUE
+ );
+ }
+ }
+ }
+ }
+
+ //
+ // If all APs finish, return EFI_SUCCESS.
+ //
+ if (CpuMpData->RunningCount == 0) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // If timeout expires, report timeout.
+ //
+ if (CheckTimeout (
+ &CpuMpData->CurrentTime,
+ &CpuMpData->TotalTime,
+ CpuMpData->ExpectedTime
+ )
+ )
+ {
+ return EFI_TIMEOUT;
+ }
+
+ return EFI_NOT_READY;
+}
+
+/**
+ Worker function to execute a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] ExcludeBsp Whether let BSP also trig this task.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval others Failed to Startup all APs.
+
+**/
+EFI_STATUS
+StartupAllCPUsWorker (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN BOOLEAN ExcludeBsp,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ CPU_MP_DATA *CpuMpData;
+ UINTN ProcessorCount;
+ UINTN ProcessorNumber;
+ UINTN CallerNumber;
+ CPU_AP_DATA *CpuData;
+ BOOLEAN HasEnabledAp;
+ CPU_STATE ApState;
+
+ CpuMpData = GetCpuMpData ();
+
+ if (FailedCpuList != NULL) {
+ *FailedCpuList = NULL;
+ }
+
+ if ((CpuMpData->CpuCount == 1) && ExcludeBsp) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ MpInitLibWhoAmI (&CallerNumber);
+ if (CallerNumber != CpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Update AP state
+ //
+ CheckAndUpdateApsStatus ();
+
+ ProcessorCount = CpuMpData->CpuCount;
+ HasEnabledAp = FALSE;
+ //
+ // Check whether all enabled APs are idle.
+ // If any enabled AP is not idle, return EFI_NOT_READY.
+ //
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+ if (ProcessorNumber != CpuMpData->BspNumber) {
+ ApState = GetApState (CpuData);
+ if (ApState != CpuStateDisabled) {
+ HasEnabledAp = TRUE;
+ if (ApState != CpuStateIdle) {
+ //
+ // If any enabled APs are busy, return EFI_NOT_READY.
+ //
+ return EFI_NOT_READY;
+ }
+ }
+ }
+ }
+
+ if (!HasEnabledAp && ExcludeBsp) {
+ //
+ // If no enabled AP exists and not include Bsp to do the procedure, return EFI_NOT_STARTED.
+ //
+ return EFI_NOT_STARTED;
+ }
+
+ CpuMpData->RunningCount = 0;
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+ CpuData->Waiting = FALSE;
+ if (ProcessorNumber != CpuMpData->BspNumber) {
+ if (CpuData->State == CpuStateIdle) {
+ //
+ // Mark this processor as responsible for current calling.
+ //
+ CpuData->Waiting = TRUE;
+ CpuMpData->RunningCount++;
+ }
+ }
+ }
+
+ CpuMpData->Procedure = Procedure;
+ CpuMpData->ProcArguments = ProcedureArgument;
+ CpuMpData->SingleThread = SingleThread;
+ CpuMpData->FinishedCount = 0;
+ CpuMpData->ExpectedTime = CalculateTimeout (
+ TimeoutInMicroseconds,
+ &CpuMpData->CurrentTime
+ );
+ CpuMpData->TotalTime = 0;
+ CpuMpData->WaitEvent = WaitEvent;
+
+ if (!SingleThread) {
+ WakeUpAP (CpuMpData, TRUE, 0, Procedure, ProcedureArgument, FALSE);
+ } else {
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
+ if (ProcessorNumber == CallerNumber) {
+ continue;
+ }
+
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument, TRUE);
+ break;
+ }
+ }
+ }
+
+ if (!ExcludeBsp) {
+ //
+ // Start BSP.
+ //
+ Procedure (ProcedureArgument);
+ }
+
+ Status = EFI_SUCCESS;
+ if (WaitEvent == NULL) {
+ do {
+ Status = CheckAllAPs ();
+ } while (Status == EFI_NOT_READY);
+ }
+
+ return Status;
+}
+
+/**
+ Worker function to let the caller get one enabled AP to execute a caller-provided
+ function.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] ProcessorNumber The handle number of the AP.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] Finished If AP returns from Procedure before the
+ timeout expires, its content is set to TRUE.
+ Otherwise, the value is set to FALSE.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval others Failed to Startup AP.
+
+**/
+EFI_STATUS
+StartupThisAPWorker (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ CPU_MP_DATA *CpuMpData;
+ CPU_AP_DATA *CpuData;
+ UINTN CallerNumber;
+
+ CpuMpData = GetCpuMpData ();
+
+ if (Finished != NULL) {
+ *Finished = FALSE;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ MpInitLibWhoAmI (&CallerNumber);
+ if (CallerNumber != CpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Check whether processor with the handle specified by ProcessorNumber exists
+ //
+ if (ProcessorNumber >= CpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether specified processor is BSP
+ //
+ if (ProcessorNumber == CpuMpData->BspNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check parameter Procedure
+ //
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Update AP state
+ //
+ CheckAndUpdateApsStatus ();
+
+ //
+ // Check whether specified AP is disabled
+ //
+ if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];
+ CpuData->WaitEvent = WaitEvent;
+ CpuData->Finished = Finished;
+ CpuData->ExpectedTime = CalculateTimeout (TimeoutInMicroseconds, &CpuData->CurrentTime);
+ CpuData->TotalTime = 0;
+
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument, FALSE);
+
+ //
+ // If WaitEvent is NULL, execute in blocking mode.
+ // BSP checks AP's state until it finishes or TimeoutInMicrosecsond expires.
+ //
+ Status = EFI_SUCCESS;
+ if (WaitEvent == NULL) {
+ do {
+ Status = CheckThisAP (ProcessorNumber);
+ } while (Status == EFI_NOT_READY);
+ }
+
+ return Status;
+}
+
+/**
+ This service executes a caller provided function on all enabled CPUs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. TimeoutInMicroseconds is ignored
+ for BSP.
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+
+ @retval EFI_SUCCESS In blocking mode, all CPUs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled CPUs.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupAllCPUs (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ )
+{
+ return StartupAllCPUsWorker (
+ Procedure,
+ TRUE,
+ FALSE,
+ NULL,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ NULL
+ );
+}
+
+/**
+ MP Initialize Library initialization.
+
+ This service will allocate AP reset vector and wakeup all APs to do APs
+ initialization.
+
+ This service must be invoked before all other MP Initialize Library
+ service are invoked.
+
+ @retval EFI_SUCCESS MP initialization succeeds.
+ @retval Others MP initialization fails.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibInitialize (
+ VOID
+ )
+{
+ CPU_MP_DATA *OldCpuMpData;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+ UINT32 MaxLogicalProcessorNumber;
+ UINTN BufferSize;
+ UINTN MonitorBufferSize;
+ VOID *MpBuffer;
+ CPU_MP_DATA *CpuMpData;
+ UINTN Index;
+
+ OldCpuMpData = GetCpuMpDataFromGuidedHob ();
+ if (OldCpuMpData == NULL) {
+ MaxLogicalProcessorNumber = PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
+ } else {
+ MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;
+ }
+
+ ASSERT (MaxLogicalProcessorNumber != 0);
+
+ MonitorBufferSize = sizeof (WAKEUP_AP_SIGNAL) * MaxLogicalProcessorNumber;
+
+ BufferSize = 0;
+ BufferSize += MonitorBufferSize;
+ BufferSize += sizeof (CPU_MP_DATA);
+ BufferSize += (sizeof (CPU_AP_DATA) + sizeof (CPU_INFO_IN_HOB))* MaxLogicalProcessorNumber;
+ MpBuffer = AllocatePages (EFI_SIZE_TO_PAGES (BufferSize));
+ ASSERT (MpBuffer != NULL);
+ ZeroMem (MpBuffer, BufferSize);
+
+ CpuMpData = (CPU_MP_DATA *)MpBuffer;
+
+ CpuMpData->CpuCount = 1;
+ CpuMpData->BspNumber = 0;
+ CpuMpData->CpuData = (CPU_AP_DATA *)(CpuMpData + 1);
+ CpuMpData->CpuInfoInHob = (UINT64)(UINTN)(CpuMpData->CpuData + MaxLogicalProcessorNumber);
+
+ InitializeSpinLock (&CpuMpData->MpLock);
+
+ //
+ // Set BSP basic information
+ //
+ InitializeApData (CpuMpData, 0, 0);
+
+ //
+ // Set up APs wakeup signal buffer
+ //
+ for (Index = 0; Index < MaxLogicalProcessorNumber; Index++) {
+ CpuMpData->CpuData[Index].StartupApSignal =
+ (UINT32 *)((MpBuffer + BufferSize - MonitorBufferSize) + (sizeof (WAKEUP_AP_SIGNAL) * Index));
+ }
+
+ if (OldCpuMpData == NULL) {
+ if (MaxLogicalProcessorNumber > 1) {
+ //
+ // Wakeup all APs and calculate the processor count in system
+ //
+ CollectProcessorCount (CpuMpData);
+ }
+ } else {
+ //
+ // APs have been wakeup before, just get the CPU Information
+ // from HOB
+ //
+ CpuMpData->CpuCount = OldCpuMpData->CpuCount;
+ CpuMpData->BspNumber = OldCpuMpData->BspNumber;
+ CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;
+ CpuMpData->MpCpuExchangeInfo = OldCpuMpData->MpCpuExchangeInfo;
+
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ InitializeSpinLock (&CpuMpData->CpuData[Index].ApLock);
+ CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0) ? TRUE : FALSE;
+ }
+
+ if (CpuMpData->CpuCount > 1) {
+ //
+ // Only needs to use this flag for DXE phase to update the wake up
+ // buffer. Wakeup buffer allocated in PEI phase is no longer valid
+ // in DXE.
+ //
+ CpuMpData->InitFlag = ApInitReconfig;
+ WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL, TRUE);
+
+ //
+ // Wait for all APs finished initialization
+ //
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
+ CpuPause ();
+ }
+
+ CpuMpData->InitFlag = ApInitDone;
+ }
+
+ if (MaxLogicalProcessorNumber > 1) {
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
+ }
+ }
+ }
+
+ //
+ // Initialize global data for MP support
+ //
+ InitMpGlobalData (CpuMpData);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for
+ the requested processor is deposited.
+ @param[out] HealthData Return processor health data.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibGetProcessorInfo (
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer,
+ OUT EFI_HEALTH_FLAGS *HealthData OPTIONAL
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+ UINTN CallerNumber;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+
+ CpuMpData = GetCpuMpData ();
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+
+ //
+ // Check whether caller processor is BSP
+ //
+ MpInitLibWhoAmI (&CallerNumber);
+ if (CallerNumber != CpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (ProcessorInfoBuffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (ProcessorNumber >= CpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ ProcessorInfoBuffer->ProcessorId = (UINT64)CpuInfoInHob[ProcessorNumber].ApicId;
+ ProcessorInfoBuffer->StatusFlag = 0;
+ if (ProcessorNumber == CpuMpData->BspNumber) {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_AS_BSP_BIT;
+ }
+
+ if (CpuMpData->CpuData[ProcessorNumber].CpuHealthy) {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_HEALTH_STATUS_BIT;
+ }
+
+ if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {
+ ProcessorInfoBuffer->StatusFlag &= ~PROCESSOR_ENABLED_BIT;
+ } else {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_ENABLED_BIT;
+ }
+
+ if (HealthData != NULL) {
+ HealthData->Uint32 = CpuInfoInHob[ProcessorNumber].Health;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ @param[out] ProcessorNumber Pointer to the handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibWhoAmI (
+ OUT UINTN *ProcessorNumber
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+
+ if (ProcessorNumber == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ CpuMpData = GetCpuMpData ();
+
+ return GetProcessorNumber (CpuMpData, ProcessorNumber);
+}
+
+/**
+ Retrieves the number of logical processor in the platform and the number of
+ those logical processors that are enabled on this boot. This service may only
+ be called from the BSP.
+
+ @param[out] NumberOfProcessors Pointer to the total number of logical
+ processors in the system, including the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
+ processors that exist in system, including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL and NumberOfEnabledProcessors
+ is NULL.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibGetNumberOfProcessors (
+ OUT UINTN *NumberOfProcessors OPTIONAL,
+ OUT UINTN *NumberOfEnabledProcessors OPTIONAL
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+ UINTN CallerNumber;
+ UINTN ProcessorNumber;
+ UINTN EnabledProcessorNumber;
+ UINTN Index;
+
+ CpuMpData = GetCpuMpData ();
+
+ if ((NumberOfProcessors == NULL) && (NumberOfEnabledProcessors == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ MpInitLibWhoAmI (&CallerNumber);
+ if (CallerNumber != CpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ ProcessorNumber = CpuMpData->CpuCount;
+ EnabledProcessorNumber = 0;
+ for (Index = 0; Index < ProcessorNumber; Index++) {
+ if (GetApState (&CpuMpData->CpuData[Index]) != CpuStateDisabled) {
+ EnabledProcessorNumber++;
+ }
+ }
+
+ if (NumberOfProcessors != NULL) {
+ *NumberOfProcessors = ProcessorNumber;
+ }
+
+ if (NumberOfEnabledProcessors != NULL) {
+ *NumberOfEnabledProcessors = EnabledProcessorNumber;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get pointer to CPU MP Data structure from GUIDed HOB.
+
+ @return The pointer to CPU MP Data structure.
+**/
+CPU_MP_DATA *
+GetCpuMpDataFromGuidedHob (
+ VOID
+ )
+{
+ EFI_HOB_GUID_TYPE *GuidHob;
+ VOID *DataInHob;
+ CPU_MP_DATA *CpuMpData;
+
+ CpuMpData = NULL;
+ GuidHob = GetFirstGuidHob (&mCpuInitMpLibHobGuid);
+
+ if (GuidHob != NULL) {
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ CpuMpData = (CPU_MP_DATA *)(*(UINTN *)DataInHob);
+ }
+
+ return CpuMpData;
+}
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.h b/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.h
new file mode 100644
index 0000000000..16db52e16c
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.h
@@ -0,0 +1,361 @@
+/** @file
+ Common header file for LoongArch MP Initialize Library.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef MP_LIB_H_
+#define MP_LIB_H_
+
+#include <PiPei.h>
+#include <Library/PeiServicesLib.h>
+
+#include <Library/MpInitLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/CpuLib.h>
+#include <Library/TimerLib.h>
+#include <Library/SynchronizationLib.h>
+#include <Library/HobLib.h>
+
+#define WAKEUP_AP_SIGNAL SIGNATURE_32 ('S', 'T', 'A', 'P')
+
+#define CPU_INIT_MP_LIB_HOB_GUID \
+ { \
+ 0x58eb6a19, 0x3699, 0x4c68, { 0xa8, 0x36, 0xda, 0xcd, 0x8e, 0xdc, 0xad, 0x4a } \
+ }
+
+#define PROCESSOR_RESOURCE_HOB_GUID \
+ { \
+ 0xb855c7fe, 0xa758, 0x701f, { 0xa7, 0x30, 0x87, 0xf3, 0x9c, 0x03, 0x46, 0x7e } \
+ }
+
+//
+// AP loop state when APs are in idle state
+// It's value is the same with PcdCpuApLoopMode
+//
+typedef enum {
+ ApInHltLoop = 1,
+ ApInRunLoop = 2
+} AP_LOOP_MODE;
+
+//
+// AP initialization state during APs wakeup
+//
+typedef enum {
+ ApInitConfig = 1,
+ ApInitReconfig = 2,
+ ApInitDone = 3
+} AP_INIT_STATE;
+
+//
+// AP state
+//
+typedef enum {
+ CpuStateIdle,
+ CpuStateReady,
+ CpuStateBusy,
+ CpuStateFinished,
+ CpuStateDisabled
+} CPU_STATE;
+
+//
+// AP related data
+//
+typedef struct {
+ SPIN_LOCK ApLock;
+ volatile UINT32 *StartupApSignal;
+ volatile UINTN ApFunction;
+ volatile UINTN ApFunctionArgument;
+ BOOLEAN CpuHealthy;
+ volatile CPU_STATE State;
+ BOOLEAN Waiting;
+ BOOLEAN *Finished;
+ UINT64 ExpectedTime;
+ UINT64 CurrentTime;
+ UINT64 TotalTime;
+ EFI_EVENT WaitEvent;
+} CPU_AP_DATA;
+
+//
+// Basic CPU information saved in Guided HOB.
+// Because the contents will be shard between PEI and DXE,
+// we need to make sure the each fields offset same in different
+// architecture.
+//
+#pragma pack (1)
+typedef struct {
+ UINT32 ApicId;
+ UINT32 Health;
+} CPU_INFO_IN_HOB;
+#pragma pack ()
+
+typedef struct _CPU_MP_DATA CPU_MP_DATA;
+
+#pragma pack(1)
+
+//
+// MP CPU exchange information for AP reset code
+// This structure is required to be packed because fixed field offsets
+// into this structure are used in assembly code in this module
+//
+typedef struct {
+ CPU_MP_DATA *CpuMpData;
+} MP_CPU_EXCHANGE_INFO;
+
+#pragma pack()
+
+typedef struct {
+ SPIN_LOCK Lock;
+ UINT32 CpuCount;
+ UINT64 CpuInfoInHob;
+} PROCESSOR_RESOURCE_DATA;
+
+//
+// CPU MP Data save in memory
+//
+struct _CPU_MP_DATA {
+ UINT64 CpuInfoInHob;
+ UINT32 CpuCount;
+ UINT32 BspNumber;
+ //
+ // The above fields data will be passed from PEI to DXE
+ // Please make sure the fields offset same in the different
+ // architecture.
+ //
+ SPIN_LOCK MpLock;
+
+ volatile UINT32 FinishedCount;
+ UINT32 RunningCount;
+ BOOLEAN SingleThread;
+ EFI_AP_PROCEDURE Procedure;
+ VOID *ProcArguments;
+ BOOLEAN *Finished;
+ UINT64 ExpectedTime;
+ UINT64 CurrentTime;
+ UINT64 TotalTime;
+ EFI_EVENT WaitEvent;
+
+ AP_INIT_STATE InitFlag;
+ UINT8 ApLoopMode;
+ CPU_AP_DATA *CpuData;
+ volatile MP_CPU_EXCHANGE_INFO *MpCpuExchangeInfo;
+};
+
+extern EFI_GUID mCpuInitMpLibHobGuid;
+extern EFI_GUID mProcessorResourceHobGuid;
+
+/**
+ Get the pointer to CPU MP Data structure.
+
+ @return The pointer to CPU MP Data structure.
+**/
+CPU_MP_DATA *
+GetCpuMpData (
+ VOID
+ );
+
+/**
+ Save the pointer to CPU MP Data structure.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure will be saved.
+**/
+VOID
+SaveCpuMpData (
+ IN CPU_MP_DATA *CpuMpData
+ );
+
+/**
+ This function will be called by BSP to wakeup AP.
+
+ @param[in] CpuMpData Pointer to CPU MP Data
+ @param[in] Broadcast TRUE: Send broadcast IPI to all APs
+ FALSE: Send IPI to AP by ApicId
+ @param[in] ProcessorNumber The handle number of specified processor
+ @param[in] Procedure The function to be invoked by AP
+ @param[in] ProcedureArgument The argument to be passed into AP function
+ @param[in] WakeUpDisabledAps Whether need to wake up disabled APs in broadcast mode.
+**/
+VOID
+WakeUpAP (
+ IN CPU_MP_DATA *CpuMpData,
+ IN BOOLEAN Broadcast,
+ IN UINTN ProcessorNumber,
+ IN EFI_AP_PROCEDURE Procedure OPTIONAL,
+ IN VOID *ProcedureArgument OPTIONAL,
+ IN BOOLEAN WakeUpDisabledAps
+ );
+
+/**
+ Initialize global data for MP support.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+InitMpGlobalData (
+ IN CPU_MP_DATA *CpuMpData
+ );
+
+/**
+ Worker function to execute a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval others Failed to Startup all APs.
+
+**/
+EFI_STATUS
+StartupAllCPUsWorker (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN BOOLEAN ExcludeBsp,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ );
+
+/**
+ Worker function to let the caller get one enabled AP to execute a caller-provided
+ function.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] ProcessorNumber The handle number of the AP.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] Finished If AP returns from Procedure before the
+ timeout expires, its content is set to TRUE.
+ Otherwise, the value is set to FALSE.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval others Failed to Startup AP.
+
+**/
+EFI_STATUS
+StartupThisAPWorker (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ );
+
+/**
+ Worker function to let the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+ This instance will be added in the future.
+
+ @param[in] ProcessorNumber The handle number of AP.
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval others Failed to Enable/Disable AP.
+
+**/
+EFI_STATUS
+EnableDisableApWorker (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
+
+/**
+ Get pointer to CPU MP Data structure from GUIDed HOB.
+
+ @return The pointer to CPU MP Data structure.
+**/
+CPU_MP_DATA *
+GetCpuMpDataFromGuidedHob (
+ VOID
+ );
+
+/** Checks status of specified AP.
+
+ This function checks whether the specified AP has finished the task assigned
+ by StartupThisAP(), and whether timeout expires.
+
+ @param[in] ProcessorNumber The handle number of processor.
+
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
+ @retval EFI_TIMEOUT The timeout expires.
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
+**/
+EFI_STATUS
+CheckThisAP (
+ IN UINTN ProcessorNumber
+ );
+
+/**
+ Checks status of all APs.
+
+ This function checks whether all APs have finished task assigned by StartupAllAPs(),
+ and whether timeout expires.
+
+ @retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().
+ @retval EFI_TIMEOUT The timeout expires.
+ @retval EFI_NOT_READY APs have not finished task and timeout has not expired.
+**/
+EFI_STATUS
+CheckAllAPs (
+ VOID
+ );
+
+/**
+ Checks APs status and updates APs status if needed.
+
+**/
+VOID
+CheckAndUpdateApsStatus (
+ VOID
+ );
+
+/**
+ Enable Debug Agent to support source debugging on AP function.
+ This instance will added in the future.
+
+**/
+VOID
+EnableDebugAgent (
+ VOID
+ );
+
+#endif
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
new file mode 100644
index 0000000000..13711bb458
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
@@ -0,0 +1,37 @@
+## @file
+# LoongArch64 MP initialize support functions for PEI phase.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiMpInitLib
+ MODULE_UNI_FILE = PeiMpInitLib.uni
+ FILE_GUID = ED078F16-A2D3-2F34-9267-E24D56E91FCF
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.1
+ LIBRARY_CLASS = MpInitLib|PEIM
+
+[Sources.common]
+ PeiMpLib.c
+ MpLib.c
+ MpLib.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ MemoryAllocationLib
+ HobLib
+ CpuLib
+ SynchronizationLib
+ TimerLib
+
+[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuApInitTimeOutInMicroSeconds ## CONSUMES
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.uni b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.uni
new file mode 100644
index 0000000000..f22f09523d
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// MP Initialize Library instance for PEI driver.
+//
+// MP Initialize Library instance for PEI driver.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "MP Initialize Library instance for PEI driver."
+
+#string STR_MODULE_DESCRIPTION #language en-US "MP Initialize Library instance for PEI driver."
diff --git a/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpLib.c
new file mode 100644
index 0000000000..80938599b3
--- /dev/null
+++ b/UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpLib.c
@@ -0,0 +1,404 @@
+/** @file
+ LoongArch64 MP initialize support functions for PEI phase.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "MpLib.h"
+
+/**
+ Enable Debug Agent to support source debugging on AP function.
+
+**/
+VOID
+EnableDebugAgent (
+ VOID
+ )
+{
+}
+
+/**
+ Get pointer to CPU MP Data structure.
+
+ @return The pointer to CPU MP Data structure.
+**/
+CPU_MP_DATA *
+GetCpuMpData (
+ VOID
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+
+ CpuMpData = GetCpuMpDataFromGuidedHob ();
+ ASSERT (CpuMpData != NULL);
+ return CpuMpData;
+}
+
+/**
+ Save the pointer to CPU MP Data structure.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure will be saved.
+**/
+VOID
+SaveCpuMpData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ UINT64 Data64;
+
+ //
+ // Build location of CPU MP DATA buffer in HOB
+ //
+ Data64 = (UINT64)(UINTN)CpuMpData;
+ BuildGuidDataHob (
+ &mCpuInitMpLibHobGuid,
+ (VOID *)&Data64,
+ sizeof (UINT64)
+ );
+}
+
+/**
+ Save the Processor Resource Data.
+
+ @param[in] ResourceData The pointer to Processor Resource Data structure will be saved.
+**/
+VOID
+SaveProcessorResourceData (
+ IN PROCESSOR_RESOURCE_DATA *ResourceData
+ )
+{
+ UINT64 Data64;
+
+ //
+ // Build location of Processor Resource Data buffer in HOB
+ //
+ Data64 = (UINT64)(UINTN)ResourceData;
+ BuildGuidDataHob (
+ &mProcessorResourceHobGuid,
+ (VOID *)&Data64,
+ sizeof (UINT64)
+ );
+}
+
+/**
+ Get available EfiBootServicesCode memory below 4GB by specified size.
+
+ This buffer is required to safely transfer AP from real address mode to
+ protected mode or long mode, due to the fact that the buffer returned by
+ GetWakeupBuffer() may be marked as non-executable.
+
+ @param[in] BufferSize Wakeup transition buffer size.
+
+ @retval other Return wakeup transition buffer address below 4GB.
+ @retval 0 Cannot find free memory below 4GB.
+**/
+UINTN
+GetModeTransitionBuffer (
+ IN UINTN BufferSize
+ )
+{
+ //
+ // PEI phase doesn't need to do such transition. So simply return 0.
+ //
+ return 0;
+}
+
+/**
+ Checks APs status and updates APs status if needed.
+
+**/
+VOID
+CheckAndUpdateApsStatus (
+ VOID
+ )
+{
+}
+
+/**
+ Initialize global data for MP support.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+InitMpGlobalData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ SaveCpuMpData (CpuMpData);
+}
+
+/**
+ This service executes a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MPInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Initialization
+ library, and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupAllAPs (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ if (WaitEvent != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return StartupAllCPUsWorker (
+ Procedure,
+ SingleThread,
+ TRUE,
+ NULL,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ FailedCpuList
+ );
+}
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function.
+
+ @param[in] Procedure A pointer to the function to be run on the
+ designated AP of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until this AP finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on this AP,
+ and go on executing immediately. If this AP
+ return from Procedure or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ this AP to finish this Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ this AP returns from Procedure, then Procedure
+ on the AP is terminated. The
+ AP is available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MpInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure on the
+ specified AP.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupThisAP (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ )
+{
+ if (WaitEvent != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return StartupThisAPWorker (
+ Procedure,
+ ProcessorNumber,
+ NULL,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ Finished
+ );
+}
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibSwitchBSP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ @param[in] ProcessorNumber The handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibEnableDisableAP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index 709992d327..da49031877 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -211,6 +211,8 @@
UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
+ UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
+ UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110717): https://edk2.groups.io/g/devel/message/110717
Mute This Topic: https://groups.io/mt/102413871/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 14/30] UefiCpuPkg: Add CpuDxe driver for LoongArch64
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (12 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 13/30] UefiCpuPkg: Add multiprocessor library for LoongArch64 Chao Li
@ 2023-11-06 3:28 ` Chao Li
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64 Chao Li
` (18 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:28 UTC (permalink / raw)
To: devel
Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann, Baoqi Zhang,
Dongyan Qian
Added a new DXE driver named CpuDxeLoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Dongyan Qian <qiandongyan@loongson.cn>
---
UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.c | 440 ++++++++++++++++++
UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.h | 261 +++++++++++
UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf | 60 +++
UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.uni | 15 +
UefiCpuPkg/CpuDxeLoongArch64/CpuMp.c | 544 +++++++++++++++++++++++
UefiCpuPkg/CpuDxeLoongArch64/CpuMp.h | 471 ++++++++++++++++++++
UefiCpuPkg/CpuDxeLoongArch64/Exception.c | 150 +++++++
UefiCpuPkg/UefiCpuPkg.dsc | 1 +
8 files changed, 1942 insertions(+)
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.c
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.h
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.uni
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuMp.c
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/CpuMp.h
create mode 100644 UefiCpuPkg/CpuDxeLoongArch64/Exception.c
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.c b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.c
new file mode 100644
index 0000000000..6c5e2bf96d
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.c
@@ -0,0 +1,440 @@
+/** @file CpuDxe.c
+
+ CPU DXE Module to produce CPU ARCH Protocol.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+#include <Library/CpuMmuLib.h>
+#include <Guid/IdleLoopEvent.h>
+#include <Register/LoongArch64/Csr.h>
+
+//
+// Globals used to initialize the protocol
+//
+EFI_HANDLE mCpuHandle = NULL;
+EFI_CPU_ARCH_PROTOCOL gCpu = {
+ CpuFlushCpuDataCache,
+ CpuEnableInterrupt,
+ CpuDisableInterrupt,
+ CpuGetInterruptState,
+ CpuInit,
+ CpuRegisterInterruptHandler,
+ CpuGetTimerValue,
+ CpuSetMemoryAttributes,
+ 0, // NumberOfTimers
+ 4, // DmaBufferAlignment
+};
+
+/**
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's data cache. This
+ function may flush more bytes than Length specifies depending upon
+ the granularity of the flush operation that the processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
+ the processor's data cache.
+ @retval EFI_INVALID_PARAMETER The processor does not support the cache flush type specified
+ by FlushType.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ )
+{
+ switch (FlushType) {
+ case EfiCpuFlushTypeWriteBack:
+ WriteBackDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ case EfiCpuFlushTypeInvalidate:
+ InvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ case EfiCpuFlushTypeWriteBackInvalidate:
+ WriteBackInvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ EnableInterrupts ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ DisableInterrupts ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves the processor's current interrupt state a returns it in
+ State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ )
+{
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *State = GetInterruptState ();
+ return EFI_SUCCESS;
+}
+
+/**
+ This function generates an INIT on the processor. If this function succeeds, then the
+ processor will be reset, and control will not be returned to the caller. If InitType is
+ not supported by this processor, or the processor cannot programmatically generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return RegisterInterruptHandler (InterruptType, InterruptHandler);
+}
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ This function modifies the attributes for the memory region specified by BaseAddress and
+ Length from their current attributes to the attributes specified by Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a memory region.
+ @param Length The size in bytes of the memory region.
+ @param EfiAttributes The bit mask of attributes to set for the memory region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more bytes of the memory
+ resource range specified by BaseAddress and Length.
+ The bit mask of attributes is not support for the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 EfiAttributes
+ )
+{
+ EFI_STATUS Status;
+ UINTN LoongArchAttributes;
+ UINTN RegionBaseAddress;
+ UINTN RegionLength;
+ UINTN RegionLoongArchAttributes;
+
+ RegionLength = 0x0;
+
+ if ((BaseAddress & (SIZE_4KB - 1)) != 0) {
+ //
+ // Minimum granularity is SIZE_4KB.
+ //
+ DEBUG ((
+ DEBUG_INFO,
+ "CpuSetMemoryAttributes(%lx, %lx, %lx): Minimum granularity is SIZE_4KB\n",
+ BaseAddress,
+ Length,
+ EfiAttributes
+ ));
+
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Convert the 'Attribute' into LoongArch Attribute
+ //
+ LoongArchAttributes = EfiAttributeConverse (EfiAttributes);
+
+ //
+ // Get the region starting from 'BaseAddress' and its 'Attribute'
+ //
+ RegionBaseAddress = BaseAddress;
+ Status = GetMemoryRegionAttribute (
+ RegionBaseAddress,
+ BaseAddress + Length,
+ &RegionLength,
+ &RegionLoongArchAttributes
+ );
+
+ //
+ // Data & Instruction Caches are flushed when we set new memory attributes.
+ // So, we only set the attributes if the new region is different.
+ //
+ if (EFI_ERROR (Status) || (RegionLoongArchAttributes != LoongArchAttributes) ||
+ ((BaseAddress + Length) > (RegionBaseAddress + RegionLength)))
+ {
+ SetMemoryAttributes (BaseAddress, Length, EfiAttributes);
+ Status = GetMemoryRegionAttribute (
+ RegionBaseAddress,
+ BaseAddress + Length,
+ &RegionLength,
+ &RegionLoongArchAttributes
+ );
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Callback function for idle events.
+
+ @param Event Event whose notification function is being invoked.
+ @param Context The pointer to the notification function's context,
+ which is implementation-dependent.
+
+**/
+VOID
+EFIAPI
+IdleLoopEventCallback (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ CpuSleep ();
+}
+
+/**
+ IPI Interrupt Handler.
+
+ @param InterruptType The type of interrupt that occurred
+ @param SystemContext A pointer to the system context when the interrupt occurred
+**/
+VOID
+EFIAPI
+IpiInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ UINT32 IpiStatus;
+
+ VOID (*Procedure) (
+ VOID
+ );
+
+ IpiStatus = IoCsrRead32 (LOONGARCH_IOCSR_IPI_STATUS);
+
+ //
+ // Clear interrupt.
+ //
+ IoCsrWrite32 (LOONGARCH_IOCSR_IPI_CLEAR, IpiStatus);
+
+ MemoryFence ();
+
+ //
+ // If the IPI IRQ is SMP_BOOT_CPU, it means the BSP is waking up the APs from the kernel.
+ // So read out the boot vector and jump to it.
+ //
+ if (IpiStatus & SMP_BOOT_CPU) {
+ Procedure = (VOID *)IoCsrRead64 (LOONGARCH_IOCSR_MBUF0);
+ Procedure ();
+ }
+}
+
+/**
+ Initialize the state information for the CPU Architectural Protocol.
+
+ @param ImageHandle Image handle this driver.
+ @param SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Thread can be successfully created
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Cannot create the thread
+
+**/
+EFI_STATUS
+CpuDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT IdleLoopEvent;
+
+ InitializeExceptions (&gCpu);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mCpuHandle,
+ &gEfiCpuArchProtocolGuid,
+ &gCpu,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Setup a callback for idle events
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ IdleLoopEventCallback,
+ NULL,
+ &gIdleLoopEventGuid,
+ &IdleLoopEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gCpu.RegisterInterruptHandler (
+ &gCpu,
+ EXCEPT_LOONGARCH_INT_IPI,
+ IpiInterruptHandler
+ );
+
+ InitializeMpSupport ();
+
+ return Status;
+}
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.h b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.h
new file mode 100644
index 0000000000..a76db96ae9
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.h
@@ -0,0 +1,261 @@
+/** @file CpuDxe.c
+
+ CPU DXE Module to produce CPU ARCH Protocol.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef CPU_DXE_H_
+#define CPU_DXE_H_
+
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include <Library/UefiLib.h>
+#include <Library/CpuLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MpInitLib.h>
+
+#include <Guid/DebugImageInfoTable.h>
+#include <Protocol/Cpu.h>
+#include <Protocol/DebugSupport.h>
+#include <Protocol/LoadedImage.h>
+
+/*
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's data cache. This
+ function may flush more bytes than Length specifies depending upon
+ the granularity of the flush operation that the processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
+ the processor's data cache.
+ @retval EFI_UNSUPPORTEDT The processor does not support the cache flush type specified
+ by FlushType.
+ @retval EFI_DEVICE_ERROR The address range from Start to Start+Length could not be flushed
+ from the processor's data cache.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ );
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ This function retrieves the processor's current interrupt state a returns it in
+ State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ );
+
+/**
+ This function generates an INIT on the processor. If this function succeeds, then the
+ processor will be reset, and control will not be returned to the caller. If InitType is
+ not supported by this processor, or the processor cannot programmatically generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ );
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ );
+
+/**
+ This function registers and enables the handler specified by InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+ handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or exception.
+
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+/**
+ This function modifies the attributes for the memory region specified by BaseAddress and
+ Length from their current attributes to the attributes specified by Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more bytes of the memory
+ resource range specified by BaseAddress and Length.
+ The bit mask of attributes is not support for the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+VOID
+InitializeExceptions (
+ IN EFI_CPU_ARCH_PROTOCOL *gCpu
+ );
+
+#endif // CPU_DXE_H_
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf
new file mode 100644
index 0000000000..11554edcbf
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf
@@ -0,0 +1,60 @@
+## @file
+# CPU driver installs CPU Architecture Protocol and CPU MP protocol.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = CpuDxe
+ MODULE_UNI_FILE = CpuDxe.uni
+ FILE_GUID = BF954921-25C1-48C0-9BFB-8D0CD7EE92DA
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = CpuDxeInitialize
+
+[Sources.Common]
+ CpuDxe.c
+ CpuMp.c
+ Exception.c
+ CpuDxe.h
+ CpuMp.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ CacheMaintenanceLib
+ CpuLib
+ DebugLib
+ DxeServicesTableLib
+ HobLib
+ PeCoffGetEntryPointLib
+ UefiDriverEntryPoint
+ UefiLib
+ MpInitLib
+ CpuExceptionHandlerLib
+ CpuMmuLib
+
+[Protocols]
+ gEfiCpuArchProtocolGuid
+ gEfiMpServiceProtocolGuid
+
+[Guids]
+ gEfiDebugImageInfoTableGuid
+ gIdleLoopEventGuid
+ gEfiVectorHandoffTableGuid
+
+[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress
+
+[Depex]
+ TRUE
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.uni b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.uni
new file mode 100644
index 0000000000..6db717b829
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.uni
@@ -0,0 +1,15 @@
+// /** @file
+// CPU driver installs CPU Architecture Protocol and CPU MP Protocol.
+//
+// CPU driver installs CPU Architecture Protocol and CPU MP Protocol.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU driver installs CPU Architecture Protocol and CPU MP Protocol."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU driver installs CPU Architecture Protocol and CPU MP Protocol."
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.c b/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.c
new file mode 100644
index 0000000000..562ae484ac
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.c
@@ -0,0 +1,544 @@
+/** @file
+ CPU DXE Module to produce CPU MP Protocol.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+
+EFI_HANDLE mMpServiceHandle = NULL;
+UINTN mNumberOfProcessors = 1;
+
+EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {
+ GetNumberOfProcessors,
+ GetProcessorInfo,
+ StartupAllAPs,
+ StartupThisAP,
+ SwitchBSP,
+ EnableDisableAP,
+ WhoAmI
+};
+
+/**
+ This service retrieves the number of logical processor in the platform
+ and the number of those logical processors that are enabled on this boot.
+ This service may only be called from the BSP.
+
+ This function is used to retrieve the following information:
+ - The number of logical processors that are present in the system.
+ - The number of enabled logical processors in the system at the instant
+ this call is made.
+
+ Because MP Service Protocol provides services to enable and disable processors
+ dynamically, the number of enabled logical processors may vary during the
+ course of a boot session.
+
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+ is returned in NumberOfProcessors, the number of currently enabled processor
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[out] NumberOfProcessors Pointer to the total number of logical
+ processors in the system, including the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
+ processors that exist in system, including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GetNumberOfProcessors (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ )
+{
+ if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return MpInitLibGetNumberOfProcessors (
+ NumberOfProcessors,
+ NumberOfEnabledProcessors
+ );
+}
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ This service retrieves detailed MP-related information about any processor
+ on the platform. Note the following:
+ - The processor information may change during the course of a boot session.
+ - The information presented here is entirely MP related.
+
+ Information regarding the number of caches and their sizes, frequency of operation,
+ slot numbers is all considered platform-related information and is not provided
+ by this service.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for
+ the requested processor is deposited.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+
+**/
+EFI_STATUS
+EFIAPI
+GetProcessorInfo (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ )
+{
+ return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer, NULL);
+}
+
+/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroseconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+ the function specified by Procedure to be started on all the enabled APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool() service.
+ -# This invocation of SignalEvent() function informs the caller that invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroseconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ return MpInitLibStartupAllAPs (
+ Procedure,
+ SingleThread,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ FailedCpuList
+ );
+}
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function. The caller can request the BSP to either wait for the completion
+ of the AP or just proceed with the next task by using the EFI event mechanism.
+ See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
+ execution support. This service may only be called from the BSP.
+
+ This function is used to dispatch one enabled AP to the function specified by
+ Procedure passing in the argument specified by ProcedureArgument. If WaitEvent
+ is NULL, execution is in blocking mode. The BSP waits until the AP finishes or
+ TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
+ BSP proceeds to the next task without waiting for the AP. If a non-blocking mode
+ is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
+ then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is
+ available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and
+ EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on the
+ designated AP of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until this AP finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on this AP,
+ and go on executing immediately. If this AP
+ return from Procedure or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ this AP to finish this Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ this AP returns from Procedure, then Procedure
+ on the AP is terminated. The
+ AP is available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure on the
+ specified AP.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupThisAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ )
+{
+ return MpInitLibStartupThisAP (
+ Procedure,
+ ProcessorNumber,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ Finished
+ );
+}
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);
+}
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a state
+ that is compatible with an MP operating system. This service may not be supported
+ after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+EnableDisableAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);
+}
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ This service returns the processor handle number for the calling processor.
+ The returned value is in the range from 0 to the total number of logical
+ processors minus 1. The total number of logical processors can be retrieved
+ with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
+ is returned. Otherwise, the current processors handle number is returned in
+ ProcessorNumber, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[out] ProcessorNumber Pointer to the handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+WhoAmI (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *ProcessorNumber
+ )
+{
+ return MpInitLibWhoAmI (ProcessorNumber);
+}
+
+/**
+ Initialize Multi-processor support.
+**/
+VOID
+InitializeMpSupport (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfProcessors;
+ UINTN NumberOfEnabledProcessors;
+
+ //
+ // Wakeup APs to do initialization
+ //
+ Status = MpInitLibInitialize ();
+ ASSERT_EFI_ERROR (Status);
+
+ MpInitLibGetNumberOfProcessors (&NumberOfProcessors, &NumberOfEnabledProcessors);
+ mNumberOfProcessors = NumberOfProcessors;
+ DEBUG ((DEBUG_INFO, "Detect CPU count: %d\n", mNumberOfProcessors));
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mMpServiceHandle,
+ &gEfiMpServiceProtocolGuid,
+ &mMpServicesTemplate,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+}
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.h b/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.h
new file mode 100644
index 0000000000..7994305206
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/CpuMp.h
@@ -0,0 +1,471 @@
+/** @file
+ CPU DXE MP support
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef CPU_MP_H_
+#define CPU_MP_H_
+
+#define SMP_BOOT_CPU BIT0
+
+/**
+ Initialize Multi-processor support.
+
+**/
+VOID
+InitializeMpSupport (
+ VOID
+ );
+
+/**
+ This service retrieves the number of logical processor in the platform
+ and the number of those logical processors that are enabled on this boot.
+ This service may only be called from the BSP.
+
+ This function is used to retrieve the following information:
+ - The number of logical processors that are present in the system.
+ - The number of enabled logical processors in the system at the instant
+ this call is made.
+
+ Because MP Service Protocol provides services to enable and disable processors
+ dynamically, the number of enabled logical processors may vary during the
+ course of a boot session.
+
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+ is returned in NumberOfProcessors, the number of currently enabled processor
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[out] NumberOfProcessors Pointer to the total number of logical
+ processors in the system, including the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
+ processors that exist in system, including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GetNumberOfProcessors (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ );
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ This service retrieves detailed MP-related information about any processor
+ on the platform. Note the following:
+ - The processor information may change during the course of a boot session.
+ - The information presented here is entirely MP related.
+
+ Information regarding the number of caches and their sizes, frequency of operation,
+ slot numbers is all considered platform-related information and is not provided
+ by this service.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for
+ the requested processor is deposited.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+
+**/
+EFI_STATUS
+EFIAPI
+GetProcessorInfo (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ );
+
+/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroseconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+ the function specified by Procedure to be started on all the enabled APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool() service.
+ -# This invocation of SignalEvent() function informs the caller that invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroseconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ );
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function. The caller can request the BSP to either wait for the completion
+ of the AP or just proceed with the next task by using the EFI event mechanism.
+ See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
+ execution support. This service may only be called from the BSP.
+
+ This function is used to dispatch one enabled AP to the function specified by
+ Procedure passing in the argument specified by ProcedureArgument. If WaitEvent
+ is NULL, execution is in blocking mode. The BSP waits until the AP finishes or
+ TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
+ BSP proceeds to the next task without waiting for the AP. If a non-blocking mode
+ is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
+ then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is
+ available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and
+ EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroseconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure or TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupThisAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ );
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ );
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a state
+ that is compatible with an MP operating system. This service may not be supported
+ after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+EnableDisableAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ This service returns the processor handle number for the calling processor.
+ The returned value is in the range from 0 to the total number of logical
+ processors minus 1. The total number of logical processors can be retrieved
+ with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
+ is returned. Otherwise, the current processors handle number is returned in
+ ProcessorNumber, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[out] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+WhoAmI (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *ProcessorNumber
+ );
+
+#endif // CPU_MP_H_
diff --git a/UefiCpuPkg/CpuDxeLoongArch64/Exception.c b/UefiCpuPkg/CpuDxeLoongArch64/Exception.c
new file mode 100644
index 0000000000..fc3823570f
--- /dev/null
+++ b/UefiCpuPkg/CpuDxeLoongArch64/Exception.c
@@ -0,0 +1,150 @@
+/** @file Exception.c
+
+ CPU DXE Module initialization exception instance.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include <Guid/VectorHandoffTable.h>
+#include <Library/CpuExceptionHandlerLib.h>
+
+VOID
+ExceptionEntryStart (
+ VOID
+ );
+
+VOID
+ExceptionEntryEnd (
+ VOID
+ );
+
+/**
+ This function registers and enables the handler specified by InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+ handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or exception.
+
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return (EFI_STATUS)RegisterCpuInterruptHandler (InterruptType, InterruptHandler);
+}
+
+/**
+ Update the exception start entry code.
+
+ @retval EFI_SUCCESS Update the exception start entry code down.
+ @retval EFI_OUT_OF_RESOURCES The start entry code size out of bounds.
+
+**/
+EFI_STATUS
+EFIAPI
+UpdateExceptionStartEntry (
+ VOID
+ )
+{
+ EFI_PHYSICAL_ADDRESS ExceptionStartEntry;
+ UINTN VectorLength;
+ UINTN MaxLength;
+ UINTN MaxSizeOfVector;
+
+ VectorLength = (UINTN)ExceptionEntryEnd - (UINTN)ExceptionEntryStart;
+
+ //
+ // A vector is up to 512 bytes.
+ //
+ MaxSizeOfVector = 512;
+ MaxLength = (MAX_LOONGARCH_EXCEPTION + MAX_LOONGARCH_INTERRUPT) * MaxSizeOfVector;
+
+ if (VectorLength > MaxLength) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ExceptionStartEntry = PcdGet64 (PcdCpuExceptionVectorBaseAddress);
+
+ InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+ CopyMem ((VOID *)ExceptionStartEntry, (VOID *)ExceptionEntryStart, VectorLength);
+ InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+ InvalidateDataCache ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize interrupt handling for DXE phase.
+
+ @param Cpu A pointer of EFI_CPU_ARCH_PROTOCOL instance.
+
+ @return VOID.
+
+**/
+VOID
+InitializeExceptions (
+ IN EFI_CPU_ARCH_PROTOCOL *Cpu
+ )
+{
+ EFI_STATUS Status;
+ EFI_VECTOR_HANDOFF_INFO *VectorInfoList;
+ EFI_VECTOR_HANDOFF_INFO *VectorInfo;
+ BOOLEAN IrqEnabled;
+
+ VectorInfo = (EFI_VECTOR_HANDOFF_INFO *)NULL;
+ Status = EfiGetSystemConfigurationTable (&gEfiVectorHandoffTableGuid, (VOID **)&VectorInfoList);
+
+ if ((Status == EFI_SUCCESS) && (VectorInfoList != NULL)) {
+ VectorInfo = VectorInfoList;
+ }
+
+ //
+ // Disable interrupts
+ //
+ Cpu->GetInterruptState (Cpu, &IrqEnabled);
+ if (IrqEnabled) {
+ Cpu->DisableInterrupt (Cpu);
+ }
+
+ //
+ // Update the Exception Start Entry code to point into CpuDxe.
+ //
+ Status = UpdateExceptionStartEntry ();
+ if (EFI_ERROR (Status)) {
+ DebugPrint (EFI_D_ERROR, "[%a]: Exception start entry code out of bounds!\n", __func__);
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ //
+ // Intialize the CpuExceptionHandlerLib so we take over the exception vector table from the DXE Core
+ //
+ Status = InitializeCpuExceptionHandlers (VectorInfo);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Enable interrupts
+ //
+ DebugPrint (EFI_D_INFO, "InitializeExceptions,IrqEnabled = %x\n", IrqEnabled);
+ if (!IrqEnabled) {
+ Status = Cpu->EnableInterrupt (Cpu);
+ }
+
+ ASSERT_EFI_ERROR (Status);
+}
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index da49031877..15854dafef 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -213,6 +213,7 @@
UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
+ UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110718): https://edk2.groups.io/g/devel/message/110718
Mute This Topic: https://groups.io/mt/102413875/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (13 preceding siblings ...)
2023-11-06 3:28 ` [edk2-devel] [PATCH v2 14/30] UefiCpuPkg: Add CpuDxe driver " Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-15 18:55 ` Leif Lindholm
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg Chao Li
` (17 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel; +Cc: Leif Lindholm, Ard Biesheuvel, Abner Chang, Daniel Schaefer
Added LoongArch64 architecture CPU IO width.
https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
EmbeddedPkg/EmbeddedPkg.dec | 3 +++
1 file changed, 3 insertions(+)
diff --git a/EmbeddedPkg/EmbeddedPkg.dec b/EmbeddedPkg/EmbeddedPkg.dec
index 341ef5e6a6..241d4f3acc 100644
--- a/EmbeddedPkg/EmbeddedPkg.dec
+++ b/EmbeddedPkg/EmbeddedPkg.dec
@@ -165,6 +165,9 @@
[PcdsFixedAtBuild.X64]
gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
+[PcdsFixedAtBuild.LOONGARCH64]
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
+
[PcdsFixedAtBuild.common, PcdsDynamic.common]
#
# Value to add to a host address to obtain a device address, using
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110719): https://edk2.groups.io/g/devel/message/110719
Mute This Topic: https://groups.io/mt/102413876/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64 Chao Li
@ 2023-11-15 18:55 ` Leif Lindholm
2023-11-16 8:15 ` Pedro Falcato
0 siblings, 1 reply; 71+ messages in thread
From: Leif Lindholm @ 2023-11-15 18:55 UTC (permalink / raw)
To: devel, lichao; +Cc: Ard Biesheuvel, Abner Chang, Daniel Schaefer
On 2023-11-06 03:29, Chao Li wrote:
> Added LoongArch64 architecture CPU IO width.
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Abner Chang <abner.chang@amd.com>
> Cc: Daniel Schaefer <git@danielschaefer.me>
> Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
I note that as a result of this we are now definining this token
individually for 5 different architectures, in order to provide two
different default values. We should probably look at consolidating
those, but that responsibility doesn't have to land on this set.
/
Leif
> ---
> EmbeddedPkg/EmbeddedPkg.dec | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/EmbeddedPkg/EmbeddedPkg.dec b/EmbeddedPkg/EmbeddedPkg.dec
> index 341ef5e6a6..241d4f3acc 100644
> --- a/EmbeddedPkg/EmbeddedPkg.dec
> +++ b/EmbeddedPkg/EmbeddedPkg.dec
> @@ -165,6 +165,9 @@
> [PcdsFixedAtBuild.X64]
> gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
>
> +[PcdsFixedAtBuild.LOONGARCH64]
> + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
> +
> [PcdsFixedAtBuild.common, PcdsDynamic.common]
> #
> # Value to add to a host address to obtain a device address, using
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111289): https://edk2.groups.io/g/devel/message/111289
Mute This Topic: https://groups.io/mt/102413876/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
2023-11-15 18:55 ` Leif Lindholm
@ 2023-11-16 8:15 ` Pedro Falcato
2023-11-16 9:17 ` Chao Li
2023-11-16 11:21 ` Leif Lindholm
0 siblings, 2 replies; 71+ messages in thread
From: Pedro Falcato @ 2023-11-16 8:15 UTC (permalink / raw)
To: devel, quic_llindhol; +Cc: lichao, Ard Biesheuvel, Abner Chang, Daniel Schaefer
On Wed, Nov 15, 2023 at 6:55 PM Leif Lindholm <quic_llindhol@quicinc.com> wrote:
>
> On 2023-11-06 03:29, Chao Li wrote:
> > Added LoongArch64 architecture CPU IO width.
> >
> > https://bugzilla.tianocore.org/show_bug.cgi?id=4584
> >
> > Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> > Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> > Cc: Abner Chang <abner.chang@amd.com>
> > Cc: Daniel Schaefer <git@danielschaefer.me>
> > Signed-off-by: Chao Li <lichao@loongson.cn>
>
> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
>
> I note that as a result of this we are now definining this token
> individually for 5 different architectures, in order to provide two
> different default values. We should probably look at consolidating
> those, but that responsibility doesn't have to land on this set.
>
> /
> Leif
>
> > ---
> > EmbeddedPkg/EmbeddedPkg.dec | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/EmbeddedPkg/EmbeddedPkg.dec b/EmbeddedPkg/EmbeddedPkg.dec
> > index 341ef5e6a6..241d4f3acc 100644
> > --- a/EmbeddedPkg/EmbeddedPkg.dec
> > +++ b/EmbeddedPkg/EmbeddedPkg.dec
> > @@ -165,6 +165,9 @@
> > [PcdsFixedAtBuild.X64]
> > gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
> >
> > +[PcdsFixedAtBuild.LOONGARCH64]
> > + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
> > +
Leif,
Can you clarify the meaning of PcdPrePiCpuIoSize? I was thinking it's
supposed to be the size of the port-mapped IO for the
architecture/platform (as hinted by in X64 = IA32 = 16, and ARM=0),
but from a quick git grep I can tell that
1) most platforms define it to something else (ArmVirt defines it to
16, real platforms have a plethora of other values)
2) gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize has no internal consumer
in EmbeddedPkg, but only in ArmPlatformPkg and LoongArchQemuPkg (and
BeagleBoardPkg's PrePi)
3) Platform/Loongson/LoongArchQemuPkg/Loongson.dec:
gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|0|UINT8|0x00010001 <-- ??
and FWIW, LoongArch does not seem to have port-mapped IO at all.
--
Pedro
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111303): https://edk2.groups.io/g/devel/message/111303
Mute This Topic: https://groups.io/mt/102413876/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
2023-11-16 8:15 ` Pedro Falcato
@ 2023-11-16 9:17 ` Chao Li
2023-11-16 11:21 ` Leif Lindholm
1 sibling, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-16 9:17 UTC (permalink / raw)
To: devel, pedro.falcato, quic_llindhol
Cc: Ard Biesheuvel, Abner Chang, Daniel Schaefer
[-- Attachment #1: Type: text/plain, Size: 2988 bytes --]
Hi Pedro,
I think this size is the CPU IO or PCI IO space width, like you saied,
LoongArch doesn't mapped the IO ports, but it has IO area.
For example, it can map the LPC IO or PCI IO ports onto the physical
addres space and register the CPU IO or PCI IO protocols to access them.
The *Loongson.dsc* of edk2-platforms sets this value to 32. I think this
value is too wide since most IO device only use 16-bit width, so I
changed this value from 32 to 16 at this point.
Thanks,
Chao
On 2023/11/16 16:15, Pedro Falcato wrote:
> On Wed, Nov 15, 2023 at 6:55 PM Leif Lindholm<quic_llindhol@quicinc.com> wrote:
>> On 2023-11-06 03:29, Chao Li wrote:
>>> Added LoongArch64 architecture CPU IO width.
>>>
>>> https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>>>
>>> Cc: Leif Lindholm<quic_llindhol@quicinc.com>
>>> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
>>> Cc: Abner Chang<abner.chang@amd.com>
>>> Cc: Daniel Schaefer<git@danielschaefer.me>
>>> Signed-off-by: Chao Li<lichao@loongson.cn>
>> Reviewed-by: Leif Lindholm<quic_llindhol@quicinc.com>
>>
>> I note that as a result of this we are now definining this token
>> individually for 5 different architectures, in order to provide two
>> different default values. We should probably look at consolidating
>> those, but that responsibility doesn't have to land on this set.
>>
>> /
>> Leif
>>
>>> ---
>>> EmbeddedPkg/EmbeddedPkg.dec | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/EmbeddedPkg/EmbeddedPkg.dec b/EmbeddedPkg/EmbeddedPkg.dec
>>> index 341ef5e6a6..241d4f3acc 100644
>>> --- a/EmbeddedPkg/EmbeddedPkg.dec
>>> +++ b/EmbeddedPkg/EmbeddedPkg.dec
>>> @@ -165,6 +165,9 @@
>>> [PcdsFixedAtBuild.X64]
>>> gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
>>>
>>> +[PcdsFixedAtBuild.LOONGARCH64]
>>> + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
>>> +
> Leif,
>
> Can you clarify the meaning of PcdPrePiCpuIoSize? I was thinking it's
> supposed to be the size of the port-mapped IO for the
> architecture/platform (as hinted by in X64 = IA32 = 16, and ARM=0),
> but from a quick git grep I can tell that
> 1) most platforms define it to something else (ArmVirt defines it to
> 16, real platforms have a plethora of other values)
> 2) gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize has no internal consumer
> in EmbeddedPkg, but only in ArmPlatformPkg and LoongArchQemuPkg (and
> BeagleBoardPkg's PrePi)
> 3) Platform/Loongson/LoongArchQemuPkg/Loongson.dec:
> gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|0|UINT8|0x00010001 <-- ??
>
> and FWIW, LoongArch does not seem to have port-mapped IO at all.
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111306): https://edk2.groups.io/g/devel/message/111306
Mute This Topic: https://groups.io/mt/102413876/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 5253 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
2023-11-16 8:15 ` Pedro Falcato
2023-11-16 9:17 ` Chao Li
@ 2023-11-16 11:21 ` Leif Lindholm
1 sibling, 0 replies; 71+ messages in thread
From: Leif Lindholm @ 2023-11-16 11:21 UTC (permalink / raw)
To: devel, pedro.falcato; +Cc: lichao, Ard Biesheuvel, Abner Chang, Daniel Schaefer
On 2023-11-16 08:15, Pedro Falcato wrote:
> Leif,
>
> Can you clarify the meaning of PcdPrePiCpuIoSize?
Not out of memory, so let's go exploring.
> I was thinking it's
> supposed to be the size of the port-mapped IO for the
> architecture/platform (as hinted by in X64 = IA32 = 16, and ARM=0),
> but from a quick git grep I can tell that
> 1) most platforms define it to something else (ArmVirt defines it to
> 16, real platforms have a plethora of other values)
> 2) gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize has no internal consumer
> in EmbeddedPkg, but only in ArmPlatformPkg and LoongArchQemuPkg (and
> BeagleBoardPkg's PrePi)
ArmVirtPkg reads this Pcd in
https://github.com/tianocore/edk2/blob/master/ArmVirtPkg/PrePi/PrePi.c#L87
which is in a call to BuildCpuHob, in
https://github.com/tianocore/edk2/blob/master/EmbeddedPkg/Library/PrePiHobLib/Hob.c#L644
which uses the argument to initialize the SizeOfIoSpace in EFI_HOB_CPU
(defined in PI spec).
This eventually gets dug up in
https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Core/Dxe/Gcd/Gcd.c#L2559
where it is used to set up the GCD I/O Space Map.
This is also the only way to find out it describes a power of 2. Neither
the spec nor any of the comment headers in the codebase describe what
the size means. Tsk, tsk.
Ultimately, this ends up being used in
https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c#L175
during InitializePciHostBridge ().
So I'm guessing, and I think it rings a bell, that this is needed to
enable PCIe I/O resources to be assigned, which *can* be supported on
Arm and probably Loongson systems through magic memory regions trapping
accesses in the PCIe IP.
> 3) Platform/Loongson/LoongArchQemuPkg/Loongson.dec:
> gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|0|UINT8|0x00010001 <-- ??
Yeah, it's not great that we don't seem to have a way to trap when Pcd's
get redefined outside of their own namespace. That happens way too
frequently. That's certainly a bug.
> and FWIW, LoongArch does not seem to have port-mapped IO at all.
So I guess the setting comes down to whether that is considered to be
the expected behaviour on Loongson platforms or not. About which I have
no idea and am happy to trust the author on :)
/
Leif
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111307): https://edk2.groups.io/g/devel/message/111307
Mute This Topic: https://groups.io/mt/102413876/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (14 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64 Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-07 9:37 ` Gerd Hoffmann
2023-11-13 11:46 ` Sami Mujawar
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module Chao Li
` (16 subsequent siblings)
32 siblings, 2 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Leif Lindholm, Sami Mujawar, Gerd Hoffmann,
Jiewen Yao, Jordan Justen
Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
to OvmfPkg for easier use by other architectures.
Build-tested only (with "ArmVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
ArmVirtPkg/ArmVirtCloudHv.dsc | 2 +-
ArmVirtPkg/ArmVirtKvmTool.dsc | 2 +-
ArmVirtPkg/ArmVirtPkg.dec | 14 --------------
ArmVirtPkg/ArmVirtQemu.dsc | 2 +-
ArmVirtPkg/ArmVirtQemuKernel.dsc | 2 +-
ArmVirtPkg/ArmVirtXen.dsc | 2 +-
.../ArmVirtPsciResetSystemPeiLib.inf | 3 ++-
.../CloudHvVirtMemInfoPeiLib.inf | 3 ++-
.../DebugLibFdtPL011UartFlash.inf | 3 ++-
.../EarlyFdt16550SerialPortHookLib.inf | 3 ++-
.../EarlyFdtPL011SerialPortLib.inf | 3 ++-
.../KvmtoolPlatformPeiLib.inf | 5 +++--
.../Library/PlatformPeiLib/PlatformPeiLib.inf | 10 +++++-----
.../QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf | 3 ++-
.../PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 3 ++-
OvmfPkg/OvmfPkg.dec | 15 +++++++++++++++
16 files changed, 42 insertions(+), 33 deletions(-)
diff --git a/ArmVirtPkg/ArmVirtCloudHv.dsc b/ArmVirtPkg/ArmVirtCloudHv.dsc
index 2cb89ce10c..76c0d28544 100644
--- a/ArmVirtPkg/ArmVirtCloudHv.dsc
+++ b/ArmVirtPkg/ArmVirtCloudHv.dsc
@@ -129,7 +129,7 @@
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
# initial location of the device tree blob passed by Cloud Hypervisor -- base of DRAM
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
index f50d53bf15..cac4fe06d3 100644
--- a/ArmVirtPkg/ArmVirtKvmTool.dsc
+++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
@@ -179,7 +179,7 @@
# We are booting from RAM using the Linux kernel boot protocol,
# x0 will point to the DTB image in memory.
#
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
index 0f2d787327..2451644844 100644
--- a/ArmVirtPkg/ArmVirtPkg.dec
+++ b/ArmVirtPkg/ArmVirtPkg.dec
@@ -42,20 +42,6 @@
gArmVirtTokenSpaceGuid.PcdTpm2SupportEnabled|FALSE|BOOLEAN|0x00000004
[PcdsFixedAtBuild, PcdsPatchableInModule]
- #
- # This is the physical address where the device tree is expected to be stored
- # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
- # can do a first pass over the device tree in the SEC phase to discover the
- # UART base address.
- #
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x00000001
-
- #
- # Padding in bytes to add to the device tree allocation, so that the DTB can
- # be modified in place (default: 256 bytes)
- #
- gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x00000002
-
#
# Binary representation of the GUID that determines the terminal type. The
# size must be exactly 16 bytes. The default value corresponds to
diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
index 30e3cfc8b9..cf306cac08 100644
--- a/ArmVirtPkg/ArmVirtQemu.dsc
+++ b/ArmVirtPkg/ArmVirtQemu.dsc
@@ -201,7 +201,7 @@
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
# initial location of the device tree blob passed by QEMU -- base of DRAM
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
index b50f8e84a3..c0d079e28d 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
+++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
@@ -198,7 +198,7 @@
# Define a default initial address for the device tree.
# Ignored if x0 != 0 at entry.
#
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
index f0d15b823b..5809832e66 100644
--- a/ArmVirtPkg/ArmVirtXen.dsc
+++ b/ArmVirtPkg/ArmVirtXen.dsc
@@ -115,7 +115,7 @@
#
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
diff --git a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
index 3a65706e8d..79217d296d 100644
--- a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
+++ b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
@@ -26,6 +26,7 @@
EmbeddedPkg/EmbeddedPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
ArmSmcLib
@@ -36,4 +37,4 @@
HobLib
[Pcd]
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
diff --git a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
index 666b5d9711..6df26ccd64 100644
--- a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
+++ b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
@@ -26,6 +26,7 @@
EmbeddedPkg/EmbeddedPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
ArmLib
@@ -44,4 +45,4 @@
[FixedPcd]
gArmTokenSpaceGuid.PcdFdSize
gArmTokenSpaceGuid.PcdFvSize
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
diff --git a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
index 7870ca2ae4..f35a0913f0 100644
--- a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
+++ b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
@@ -30,6 +30,7 @@
ArmPlatformPkg/ArmPlatformPkg.dec
ArmVirtPkg/ArmVirtPkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
BaseLib
@@ -41,7 +42,7 @@
PrintLib
[Pcd]
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
index 22aba53d9b..3e2303b7f4 100644
--- a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
@@ -29,7 +29,8 @@
ArmVirtPkg/ArmVirtPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[Pcd]
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
index f47692f06a..e677f1d9e7 100644
--- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
+++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
@@ -28,9 +28,10 @@
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
ArmVirtPkg/ArmVirtPkg.dec
+ OvmfPkg/OvmfPkg.dec
[Pcd]
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
[FixedPcd]
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
index f201aee50c..78c9d9d764 100644
--- a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
+++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
@@ -24,6 +24,7 @@
EmbeddedPkg/EmbeddedPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
DebugLib
@@ -34,11 +35,11 @@
[FixedPcd]
gArmTokenSpaceGuid.PcdFvSize
- gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
[Pcd]
gArmTokenSpaceGuid.PcdFvBaseAddress
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
[Guids]
diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
index b867d8bb89..0584a53ee3 100644
--- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
+++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
@@ -41,16 +41,16 @@
[FixedPcd]
gArmTokenSpaceGuid.PcdFvSize
- gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
[Pcd]
gArmTokenSpaceGuid.PcdFvBaseAddress
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
- gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
[Ppis]
- gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
- gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
+ gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
+ gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
[Guids]
gEarlyPL011BaseAddressGuid
diff --git a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
index f045e39a41..76c3c5d3c8 100644
--- a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
+++ b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
@@ -26,6 +26,7 @@
EmbeddedPkg/EmbeddedPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
ArmLib
@@ -44,4 +45,4 @@
gArmTokenSpaceGuid.PcdSystemMemorySize
gArmTokenSpaceGuid.PcdFdSize
gArmTokenSpaceGuid.PcdFvSize
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
index 7edf501808..691fc26350 100755
--- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
+++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
@@ -32,6 +32,7 @@
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
+ OvmfPkg/OvmfPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
ArmVirtPkg/ArmVirtPkg.dec
@@ -93,6 +94,6 @@
[Pcd]
gArmTokenSpaceGuid.PcdSystemMemoryBase
gArmTokenSpaceGuid.PcdSystemMemorySize
- gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
gArmTokenSpaceGuid.PcdFdBaseAddress
gArmTokenSpaceGuid.PcdFvBaseAddress
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index e3861e5c1b..89091e8bf1 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -481,6 +481,21 @@
#
gUefiOvmfPkgTokenSpaceGuid.PcdForceNoAcpi|0x0|BOOLEAN|0x69
+[PcdsFixedAtBuild, PcdsPatchableInModule]
+ #
+ # This is the physical address where the device tree is expected to be stored
+ # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
+ # can do a first pass over the device tree in the SEC phase to discover the
+ # UART base address.
+ #
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x6e
+
+ #
+ # Padding in bytes to add to the device tree allocation, so that the DTB can
+ # be modified in place (default: 256 bytes)
+ #
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x6f
+
[PcdsFeatureFlag]
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE|BOOLEAN|0x1c
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|FALSE|BOOLEAN|0x1d
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110720): https://edk2.groups.io/g/devel/message/110720
Mute This Topic: https://groups.io/mt/102413878/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg Chao Li
@ 2023-11-07 9:37 ` Gerd Hoffmann
2023-11-13 11:46 ` Sami Mujawar
1 sibling, 0 replies; 71+ messages in thread
From: Gerd Hoffmann @ 2023-11-07 9:37 UTC (permalink / raw)
To: Chao Li
Cc: devel, Ard Biesheuvel, Leif Lindholm, Sami Mujawar, Jiewen Yao,
Jordan Justen
On Mon, Nov 06, 2023 at 11:29:12AM +0800, Chao Li wrote:
> Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
> to OvmfPkg for easier use by other architectures.
>
> Build-tested only (with "ArmVirtQemu.dsc").
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110827): https://edk2.groups.io/g/devel/message/110827
Mute This Topic: https://groups.io/mt/102413878/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg Chao Li
2023-11-07 9:37 ` Gerd Hoffmann
@ 2023-11-13 11:46 ` Sami Mujawar
2023-11-14 1:41 ` Chao Li
1 sibling, 1 reply; 71+ messages in thread
From: Sami Mujawar @ 2023-11-13 11:46 UTC (permalink / raw)
To: Chao Li, devel
Cc: Ard Biesheuvel, Leif Lindholm, Gerd Hoffmann, Jiewen Yao,
Jordan Justen, nd@arm.com
Hi Chao,
Thank you for this patch.
I have a few suggestions marked inline as [SAMI].
Otherwise this patch looks good to me.
With those fixed,
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Regards,
Sami Mujawar
On 06/11/2023 03:29 am, Chao Li wrote:
> Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
> to OvmfPkg for easier use by other architectures.
>
> Build-tested only (with "ArmVirtQemu.dsc").
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> Cc: Sami Mujawar <sami.mujawar@arm.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> ---
> ArmVirtPkg/ArmVirtCloudHv.dsc | 2 +-
> ArmVirtPkg/ArmVirtKvmTool.dsc | 2 +-
> ArmVirtPkg/ArmVirtPkg.dec | 14 --------------
> ArmVirtPkg/ArmVirtQemu.dsc | 2 +-
> ArmVirtPkg/ArmVirtQemuKernel.dsc | 2 +-
> ArmVirtPkg/ArmVirtXen.dsc | 2 +-
> .../ArmVirtPsciResetSystemPeiLib.inf | 3 ++-
> .../CloudHvVirtMemInfoPeiLib.inf | 3 ++-
> .../DebugLibFdtPL011UartFlash.inf | 3 ++-
> .../EarlyFdt16550SerialPortHookLib.inf | 3 ++-
> .../EarlyFdtPL011SerialPortLib.inf | 3 ++-
> .../KvmtoolPlatformPeiLib.inf | 5 +++--
> .../Library/PlatformPeiLib/PlatformPeiLib.inf | 10 +++++-----
> .../QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf | 3 ++-
> .../PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 3 ++-
> OvmfPkg/OvmfPkg.dec | 15 +++++++++++++++
> 16 files changed, 42 insertions(+), 33 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirtCloudHv.dsc b/ArmVirtPkg/ArmVirtCloudHv.dsc
> index 2cb89ce10c..76c0d28544 100644
> --- a/ArmVirtPkg/ArmVirtCloudHv.dsc
> +++ b/ArmVirtPkg/ArmVirtCloudHv.dsc
> @@ -129,7 +129,7 @@
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>
> # initial location of the device tree blob passed by Cloud Hypervisor -- base of DRAM
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
> diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
> index f50d53bf15..cac4fe06d3 100644
> --- a/ArmVirtPkg/ArmVirtKvmTool.dsc
> +++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
> @@ -179,7 +179,7 @@
> # We are booting from RAM using the Linux kernel boot protocol,
> # x0 will point to the DTB image in memory.
> #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
> index 0f2d787327..2451644844 100644
> --- a/ArmVirtPkg/ArmVirtPkg.dec
> +++ b/ArmVirtPkg/ArmVirtPkg.dec
> @@ -42,20 +42,6 @@
> gArmVirtTokenSpaceGuid.PcdTpm2SupportEnabled|FALSE|BOOLEAN|0x00000004
>
> [PcdsFixedAtBuild, PcdsPatchableInModule]
> - #
> - # This is the physical address where the device tree is expected to be stored
> - # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
> - # can do a first pass over the device tree in the SEC phase to discover the
> - # UART base address.
> - #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x00000001
> -
> - #
> - # Padding in bytes to add to the device tree allocation, so that the DTB can
> - # be modified in place (default: 256 bytes)
> - #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x00000002
> -
> #
> # Binary representation of the GUID that determines the terminal type. The
> # size must be exactly 16 bytes. The default value corresponds to
> diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
> index 30e3cfc8b9..cf306cac08 100644
> --- a/ArmVirtPkg/ArmVirtQemu.dsc
> +++ b/ArmVirtPkg/ArmVirtQemu.dsc
> @@ -201,7 +201,7 @@
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>
> # initial location of the device tree blob passed by QEMU -- base of DRAM
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
> index b50f8e84a3..c0d079e28d 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
> @@ -198,7 +198,7 @@
> # Define a default initial address for the device tree.
> # Ignored if x0 != 0 at entry.
> #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
> index f0d15b823b..5809832e66 100644
> --- a/ArmVirtPkg/ArmVirtXen.dsc
> +++ b/ArmVirtPkg/ArmVirtXen.dsc
> @@ -115,7 +115,7 @@
> #
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
> gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> index 3a65706e8d..79217d296d 100644
> --- a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> +++ b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmSmcLib
> @@ -36,4 +37,4 @@
> HobLib
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> index 666b5d9711..6df26ccd64 100644
> --- a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> +++ b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmLib
> @@ -44,4 +45,4 @@
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFdSize
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> index 7870ca2ae4..f35a0913f0 100644
> --- a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> +++ b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> @@ -30,6 +30,7 @@
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> BaseLib
> @@ -41,7 +42,7 @@
> PrintLib
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
[SAMI] Please reorder this section in alphabetical order.
> gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue
> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
> gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> index 22aba53d9b..3e2303b7f4 100644
> --- a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> @@ -29,7 +29,8 @@
> ArmVirtPkg/ArmVirtPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> index f47692f06a..e677f1d9e7 100644
> --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> @@ -28,9 +28,10 @@
> MdePkg/MdePkg.dec
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>
> [FixedPcd]
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
> diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> index f201aee50c..78c9d9d764 100644
> --- a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> +++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> @@ -24,6 +24,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> DebugLib
> @@ -34,11 +35,11 @@
>
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>
> [Pcd]
> gArmTokenSpaceGuid.PcdFvBaseAddress
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
[SAMI] Please reorder in alphabetical order.
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
>
> [Guids]
> diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> index b867d8bb89..0584a53ee3 100644
> --- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> +++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> @@ -41,16 +41,16 @@
>
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>
> [Pcd]
> gArmTokenSpaceGuid.PcdFvBaseAddress
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> - gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
[SAMI] Please reorder in alphabetical order.
>
> [Ppis]
> - gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
> - gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
> + gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
> + gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
>
> [Guids]
> gEarlyPL011BaseAddressGuid
> diff --git a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> index f045e39a41..76c3c5d3c8 100644
> --- a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> +++ b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmLib
> @@ -44,4 +45,4 @@
> gArmTokenSpaceGuid.PcdSystemMemorySize
> gArmTokenSpaceGuid.PcdFdSize
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> index 7edf501808..691fc26350 100755
> --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> @@ -32,6 +32,7 @@
> MdePkg/MdePkg.dec
> MdeModulePkg/MdeModulePkg.dec
> EmbeddedPkg/EmbeddedPkg.dec
> + OvmfPkg/OvmfPkg.dec
> ArmPkg/ArmPkg.dec
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
[SAMI] I understad this section is not ordered correctly. But can you
can place the OvmfPkg/OvmfPkg.dec towards the end of this section, please?
> @@ -93,6 +94,6 @@
> [Pcd]
> gArmTokenSpaceGuid.PcdSystemMemoryBase
> gArmTokenSpaceGuid.PcdSystemMemorySize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> gArmTokenSpaceGuid.PcdFdBaseAddress
> gArmTokenSpaceGuid.PcdFvBaseAddress
[SAMI] Please reorder in alphabetical order.
> diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
> index e3861e5c1b..89091e8bf1 100644
> --- a/OvmfPkg/OvmfPkg.dec
> +++ b/OvmfPkg/OvmfPkg.dec
> @@ -481,6 +481,21 @@
> #
> gUefiOvmfPkgTokenSpaceGuid.PcdForceNoAcpi|0x0|BOOLEAN|0x69
>
> +[PcdsFixedAtBuild, PcdsPatchableInModule]
> + #
> + # This is the physical address where the device tree is expected to be stored
> + # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
> + # can do a first pass over the device tree in the SEC phase to discover the
> + # UART base address.
> + #
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x6e
> +
> + #
> + # Padding in bytes to add to the device tree allocation, so that the DTB can
> + # be modified in place (default: 256 bytes)
> + #
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x6f
> +
> [PcdsFeatureFlag]
> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE|BOOLEAN|0x1c
> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|FALSE|BOOLEAN|0x1d
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111146): https://edk2.groups.io/g/devel/message/111146
Mute This Topic: https://groups.io/mt/102413878/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg
2023-11-13 11:46 ` Sami Mujawar
@ 2023-11-14 1:41 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-14 1:41 UTC (permalink / raw)
To: devel, sami.mujawar
Cc: Ard Biesheuvel, Leif Lindholm, Gerd Hoffmann, Jiewen Yao,
Jordan Justen, nd@arm.com
[-- Attachment #1: Type: text/plain, Size: 16805 bytes --]
Hi Sami,
Ok, I will fix them in V3 and follow your suggestions, thanks for the
review.
Thanks,
Chao
On 2023/11/13 19:46, Sami Mujawar wrote:
> Hi Chao,
>
> Thank you for this patch.
>
> I have a few suggestions marked inline as [SAMI].
>
> Otherwise this patch looks good to me.
>
> With those fixed,
>
> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
>
> Regards,
>
> Sami Mujawar
>
> On 06/11/2023 03:29 am, Chao Li wrote:
>> Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
>> to OvmfPkg for easier use by other architectures.
>>
>> Build-tested only (with "ArmVirtQemu.dsc").
>>
>> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>>
>> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
>> Cc: Leif Lindholm <quic_llindhol@quicinc.com>
>> Cc: Sami Mujawar <sami.mujawar@arm.com>
>> Cc: Gerd Hoffmann <kraxel@redhat.com>
>> Cc: Jiewen Yao <jiewen.yao@intel.com>
>> Cc: Jordan Justen <jordan.l.justen@intel.com>
>> Signed-off-by: Chao Li <lichao@loongson.cn>
>> ---
>> ArmVirtPkg/ArmVirtCloudHv.dsc | 2 +-
>> ArmVirtPkg/ArmVirtKvmTool.dsc | 2 +-
>> ArmVirtPkg/ArmVirtPkg.dec | 14 --------------
>> ArmVirtPkg/ArmVirtQemu.dsc | 2 +-
>> ArmVirtPkg/ArmVirtQemuKernel.dsc | 2 +-
>> ArmVirtPkg/ArmVirtXen.dsc | 2 +-
>> .../ArmVirtPsciResetSystemPeiLib.inf | 3 ++-
>> .../CloudHvVirtMemInfoPeiLib.inf | 3 ++-
>> .../DebugLibFdtPL011UartFlash.inf | 3 ++-
>> .../EarlyFdt16550SerialPortHookLib.inf | 3 ++-
>> .../EarlyFdtPL011SerialPortLib.inf | 3 ++-
>> .../KvmtoolPlatformPeiLib.inf | 5 +++--
>> .../Library/PlatformPeiLib/PlatformPeiLib.inf | 10 +++++-----
>> .../QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf | 3 ++-
>> .../PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 3 ++-
>> OvmfPkg/OvmfPkg.dec | 15 +++++++++++++++
>> 16 files changed, 42 insertions(+), 33 deletions(-)
>>
>> diff --git a/ArmVirtPkg/ArmVirtCloudHv.dsc
>> b/ArmVirtPkg/ArmVirtCloudHv.dsc
>> index 2cb89ce10c..76c0d28544 100644
>> --- a/ArmVirtPkg/ArmVirtCloudHv.dsc
>> +++ b/ArmVirtPkg/ArmVirtCloudHv.dsc
>> @@ -129,7 +129,7 @@
>> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>> # initial location of the device tree blob passed by Cloud
>> Hypervisor -- base of DRAM
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
>> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21,
>> 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6,
>> 0xf4, 0x66, 0x23, 0x31 }
>> diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc
>> b/ArmVirtPkg/ArmVirtKvmTool.dsc
>> index f50d53bf15..cac4fe06d3 100644
>> --- a/ArmVirtPkg/ArmVirtKvmTool.dsc
>> +++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
>> @@ -179,7 +179,7 @@
>> # We are booting from RAM using the Linux kernel boot protocol,
>> # x0 will point to the DTB image in memory.
>> #
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
>> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
>> diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
>> index 0f2d787327..2451644844 100644
>> --- a/ArmVirtPkg/ArmVirtPkg.dec
>> +++ b/ArmVirtPkg/ArmVirtPkg.dec
>> @@ -42,20 +42,6 @@
>> gArmVirtTokenSpaceGuid.PcdTpm2SupportEnabled|FALSE|BOOLEAN|0x00000004
>> [PcdsFixedAtBuild, PcdsPatchableInModule]
>> - #
>> - # This is the physical address where the device tree is expected
>> to be stored
>> - # upon first entry into UEFI. This needs to be a FixedAtBuild PCD,
>> so that we
>> - # can do a first pass over the device tree in the SEC phase to
>> discover the
>> - # UART base address.
>> - #
>> -
>> gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x00000001
>> -
>> - #
>> - # Padding in bytes to add to the device tree allocation, so that
>> the DTB can
>> - # be modified in place (default: 256 bytes)
>> - #
>> -
>> gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x00000002
>> -
>> #
>> # Binary representation of the GUID that determines the terminal
>> type. The
>> # size must be exactly 16 bytes. The default value corresponds to
>> diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
>> index 30e3cfc8b9..cf306cac08 100644
>> --- a/ArmVirtPkg/ArmVirtQemu.dsc
>> +++ b/ArmVirtPkg/ArmVirtQemu.dsc
>> @@ -201,7 +201,7 @@
>> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>> # initial location of the device tree blob passed by QEMU --
>> base of DRAM
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
>> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21,
>> 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6,
>> 0xf4, 0x66, 0x23, 0x31 }
>> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc
>> b/ArmVirtPkg/ArmVirtQemuKernel.dsc
>> index b50f8e84a3..c0d079e28d 100644
>> --- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
>> +++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
>> @@ -198,7 +198,7 @@
>> # Define a default initial address for the device tree.
>> # Ignored if x0 != 0 at entry.
>> #
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
>> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
>> diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
>> index f0d15b823b..5809832e66 100644
>> --- a/ArmVirtPkg/ArmVirtXen.dsc
>> +++ b/ArmVirtPkg/ArmVirtXen.dsc
>> @@ -115,7 +115,7 @@
>> #
>> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
>> gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
>> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
>> diff --git
>> a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
>> b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
>>
>> index 3a65706e8d..79217d296d 100644
>> ---
>> a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
>> +++
>> b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
>> @@ -26,6 +26,7 @@
>> EmbeddedPkg/EmbeddedPkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [LibraryClasses]
>> ArmSmcLib
>> @@ -36,4 +37,4 @@
>> HobLib
>> [Pcd]
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> diff --git
>> a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
>> b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
>> index 666b5d9711..6df26ccd64 100644
>> ---
>> a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
>> +++
>> b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
>> @@ -26,6 +26,7 @@
>> EmbeddedPkg/EmbeddedPkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [LibraryClasses]
>> ArmLib
>> @@ -44,4 +45,4 @@
>> [FixedPcd]
>> gArmTokenSpaceGuid.PcdFdSize
>> gArmTokenSpaceGuid.PcdFvSize
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> diff --git
>> a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
>> b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
>> index 7870ca2ae4..f35a0913f0 100644
>> ---
>> a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
>> +++
>> b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
>> @@ -30,6 +30,7 @@
>> ArmPlatformPkg/ArmPlatformPkg.dec
>> ArmVirtPkg/ArmVirtPkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [LibraryClasses]
>> BaseLib
>> @@ -41,7 +42,7 @@
>> PrintLib
>> [Pcd]
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
> [SAMI] Please reorder this section in alphabetical order.
>> gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue
>> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
>> gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel
>> diff --git
>> a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
>> b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
>>
>> index 22aba53d9b..3e2303b7f4 100644
>> ---
>> a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
>> +++
>> b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
>> @@ -29,7 +29,8 @@
>> ArmVirtPkg/ArmVirtPkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [Pcd]
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
>> diff --git
>> a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
>> b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
>>
>> index f47692f06a..e677f1d9e7 100644
>> ---
>> a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
>> +++
>> b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
>> @@ -28,9 +28,10 @@
>> MdePkg/MdePkg.dec
>> ArmPlatformPkg/ArmPlatformPkg.dec
>> ArmVirtPkg/ArmVirtPkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [Pcd]
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> [FixedPcd]
>> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
>> diff --git
>> a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
>> b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
>> index f201aee50c..78c9d9d764 100644
>> --- a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
>> +++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
>> @@ -24,6 +24,7 @@
>> EmbeddedPkg/EmbeddedPkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [LibraryClasses]
>> DebugLib
>> @@ -34,11 +35,11 @@
>> [FixedPcd]
>> gArmTokenSpaceGuid.PcdFvSize
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>> [Pcd]
>> gArmTokenSpaceGuid.PcdFvBaseAddress
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> [SAMI] Please reorder in alphabetical order.
>> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
>> [Guids]
>> diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
>> b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
>> index b867d8bb89..0584a53ee3 100644
>> --- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
>> +++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
>> @@ -41,16 +41,16 @@
>> [FixedPcd]
>> gArmTokenSpaceGuid.PcdFvSize
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>> [Pcd]
>> gArmTokenSpaceGuid.PcdFvBaseAddress
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> - gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ##
>> SOMETIMES_PRODUCES
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
> [SAMI] Please reorder in alphabetical order.
>> [Ppis]
>> - gOvmfTpmDiscoveredPpiGuid ##
>> SOMETIMES_PRODUCES
>> - gPeiTpmInitializationDonePpiGuid ##
>> SOMETIMES_PRODUCES
>> + gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
>> + gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
>> [Guids]
>> gEarlyPL011BaseAddressGuid
>> diff --git
>> a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
>> b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
>> index f045e39a41..76c3c5d3c8 100644
>> --- a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
>> +++ b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
>> @@ -26,6 +26,7 @@
>> EmbeddedPkg/EmbeddedPkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> MdePkg/MdePkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> [LibraryClasses]
>> ArmLib
>> @@ -44,4 +45,4 @@
>> gArmTokenSpaceGuid.PcdSystemMemorySize
>> gArmTokenSpaceGuid.PcdFdSize
>> gArmTokenSpaceGuid.PcdFvSize
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
>> b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
>> index 7edf501808..691fc26350 100755
>> --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
>> +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
>> @@ -32,6 +32,7 @@
>> MdePkg/MdePkg.dec
>> MdeModulePkg/MdeModulePkg.dec
>> EmbeddedPkg/EmbeddedPkg.dec
>> + OvmfPkg/OvmfPkg.dec
>> ArmPkg/ArmPkg.dec
>> ArmPlatformPkg/ArmPlatformPkg.dec
>> ArmVirtPkg/ArmVirtPkg.dec
> [SAMI] I understad this section is not ordered correctly. But can you
> can place the OvmfPkg/OvmfPkg.dec towards the end of this section,
> please?
>> @@ -93,6 +94,6 @@
>> [Pcd]
>> gArmTokenSpaceGuid.PcdSystemMemoryBase
>> gArmTokenSpaceGuid.PcdSystemMemorySize
>> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>> gArmTokenSpaceGuid.PcdFdBaseAddress
>> gArmTokenSpaceGuid.PcdFvBaseAddress
> [SAMI] Please reorder in alphabetical order.
>> diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
>> index e3861e5c1b..89091e8bf1 100644
>> --- a/OvmfPkg/OvmfPkg.dec
>> +++ b/OvmfPkg/OvmfPkg.dec
>> @@ -481,6 +481,21 @@
>> #
>> gUefiOvmfPkgTokenSpaceGuid.PcdForceNoAcpi|0x0|BOOLEAN|0x69
>> +[PcdsFixedAtBuild, PcdsPatchableInModule]
>> + #
>> + # This is the physical address where the device tree is expected
>> to be stored
>> + # upon first entry into UEFI. This needs to be a FixedAtBuild PCD,
>> so that we
>> + # can do a first pass over the device tree in the SEC phase to
>> discover the
>> + # UART base address.
>> + #
>> +
>> gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x6e
>> +
>> + #
>> + # Padding in bytes to add to the device tree allocation, so that
>> the DTB can
>> + # be modified in place (default: 256 bytes)
>> + #
>> +
>> gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x6f
>> +
>> [PcdsFeatureFlag]
>> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE|BOOLEAN|0x1c
>> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|FALSE|BOOLEAN|0x1d
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111185): https://edk2.groups.io/g/devel/message/111185
Mute This Topic: https://groups.io/mt/102413878/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 24901 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (15 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-07 9:42 ` Gerd Hoffmann
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 18/30] OvmfPkg/LoongArchVirt: Add stable timer driver Chao Li
` (15 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Add PciCpuIo2Dxe for LoongArch, this module is similar to
ArmPciCpuIo2Dxe drvier.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c | 547 ++++++++++++++++++
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf | 45 ++
2 files changed, 592 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
create mode 100644 OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
diff --git a/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c b/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
new file mode 100644
index 0000000000..626a39ae26
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
@@ -0,0 +1,547 @@
+/** @file
+ Produces the CPU I/O 2 Protocol.
+
+ Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+
+#include <Protocol/CpuIo2.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#define MAX_IO_PORT_ADDRESS 0xFFFF
+
+//
+// Handle for the CPU I/O 2 Protocol
+//
+STATIC EFI_HANDLE mHandle = NULL;
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mInStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 0, // EfiCpuIoWidthFifoUint8
+ 0, // EfiCpuIoWidthFifoUint16
+ 0, // EfiCpuIoWidthFifoUint32
+ 0, // EfiCpuIoWidthFifoUint64
+ 1, // EfiCpuIoWidthFillUint8
+ 2, // EfiCpuIoWidthFillUint16
+ 4, // EfiCpuIoWidthFillUint32
+ 8 // EfiCpuIoWidthFillUint64
+};
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mOutStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 1, // EfiCpuIoWidthFifoUint8
+ 2, // EfiCpuIoWidthFifoUint16
+ 4, // EfiCpuIoWidthFifoUint32
+ 8, // EfiCpuIoWidthFifoUint64
+ 0, // EfiCpuIoWidthFillUint8
+ 0, // EfiCpuIoWidthFillUint16
+ 0, // EfiCpuIoWidthFillUint32
+ 0 // EfiCpuIoWidthFillUint64
+};
+
+/**
+ Check parameters to a CPU I/O 2 Protocol service request.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The parameters for this request pass the checks.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+**/
+EFI_STATUS
+CpuIoCheckParameter (
+ IN BOOLEAN MmioOperation,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT64 MaxCount;
+ UINT64 Limit;
+
+ //
+ // Check to see if Buffer is NULL
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Width is in the valid range
+ //
+ if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For FIFO type, the target address won't increase during the access,
+ // so treat Count as 1
+ //
+ if ((Width >= EfiCpuIoWidthFifoUint8) && (Width <= EfiCpuIoWidthFifoUint64)) {
+ Count = 1;
+ }
+
+ //
+ // Check to see if Width is in the valid range for I/O Port operations
+ //
+ Width = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+ if ((!MmioOperation) && (Width == EfiCpuIoWidthUint64)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Address is aligned
+ //
+ if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check to see if any address associated with this transfer exceeds the maximum
+ // allowed address. The maximum address implied by the parameters passed in is
+ // Address + Size * Count. If the following condition is met, then the transfer
+ // is not supported.
+ //
+ // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
+ //
+ // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
+ // can also be the maximum integer value supported by the CPU, this range
+ // check must be adjusted to avoid all overflow conditions.
+ //
+ // The following form of the range check is equivalent but assumes that
+ // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
+ //
+ Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
+ if (Count == 0) {
+ if (Address > Limit) {
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ MaxCount = RShiftU64 (Limit, Width);
+ if (MaxCount < (Count - 1)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // Check to see if Buffer is aligned
+ //
+ if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ //
+ // Make sure the parameters are valid
+ //
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+//
+// CPU I/O 2 Protocol instance
+//
+STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
+ {
+ CpuMemoryServiceRead,
+ CpuMemoryServiceWrite
+ },
+ {
+ CpuIoServiceRead,
+ CpuIoServiceWrite
+ }
+};
+
+/**
+ The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+**/
+EFI_STATUS
+EFIAPI
+PciCpuIo2Initialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mHandle,
+ &gEfiCpuIo2ProtocolGuid,
+ &mCpuIo2,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf b/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
new file mode 100644
index 0000000000..bee546b5d8
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
@@ -0,0 +1,45 @@
+## @file
+# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+#
+# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PciCpuIo2Dxe
+ FILE_GUID = 66017724-E5F7-F983-9EC5-8934866AA676
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = PciCpuIo2Initialize
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ PciCpuIo2Dxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+ UefiBootServicesTableLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation
+
+[Protocols]
+ gEfiCpuIo2ProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110721): https://edk2.groups.io/g/devel/message/110721
Mute This Topic: https://groups.io/mt/102413880/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module Chao Li
@ 2023-11-07 9:42 ` Gerd Hoffmann
2023-11-07 10:03 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Gerd Hoffmann @ 2023-11-07 9:42 UTC (permalink / raw)
To: Chao Li
Cc: devel, Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li,
Bibo Mao
On Mon, Nov 06, 2023 at 11:29:20AM +0800, Chao Li wrote:
> Add PciCpuIo2Dxe for LoongArch, this module is similar to
> ArmPciCpuIo2Dxe drvier.
What are the differences to ArmPciCpuIo2Dxe?
On a quick glance I can't see anything arch-specific here.
Maybe we should find a better place for ArmPciCpuIo2Dxe so loongarch
can use it without copying the code?
take care,
Gerd
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110828): https://edk2.groups.io/g/devel/message/110828
Mute This Topic: https://groups.io/mt/102413880/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module
2023-11-07 9:42 ` Gerd Hoffmann
@ 2023-11-07 10:03 ` Chao Li
2023-11-08 23:11 ` Sunil V L
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-07 10:03 UTC (permalink / raw)
To: devel, kraxel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 1076 bytes --]
Hi Gerd,
Yes, you are right, this driver could probably be located somewhere else
where other ARCH can easily use it, but I can not find the right place,
maybe MdeModulePkg or MdePkg? I also feel that something is not quite
right about these two places...
Thanks,
Chao
在 2023/11/7 17:42, Gerd Hoffmann 写道:
> On Mon, Nov 06, 2023 at 11:29:20AM +0800, Chao Li wrote:
>> Add PciCpuIo2Dxe for LoongArch, this module is similar to
>> ArmPciCpuIo2Dxe drvier.
> What are the differences to ArmPciCpuIo2Dxe?
> On a quick glance I can't see anything arch-specific here.
>
> Maybe we should find a better place for ArmPciCpuIo2Dxe so loongarch
> can use it without copying the code?
>
> take care,
> Gerd
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110832): https://edk2.groups.io/g/devel/message/110832
Mute This Topic: https://groups.io/mt/102413880/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 2318 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module
2023-11-07 10:03 ` Chao Li
@ 2023-11-08 23:11 ` Sunil V L
2023-11-10 3:31 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Sunil V L @ 2023-11-08 23:11 UTC (permalink / raw)
To: devel, lichao
Cc: kraxel, Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li,
Bibo Mao
On Tue, Nov 07, 2023 at 06:03:43PM +0800, Chao Li wrote:
> Hi Gerd,
>
> Yes, you are right, this driver could probably be located somewhere else
> where other ARCH can easily use it, but I can not find the right place,
> maybe MdeModulePkg or MdePkg? I also feel that something is not quite right
> about these two places...
>
Hi Chao,
It was in my TODO list and somehow never got time, is to migrate some of
these drivers and libraries to common place and use them instead of
copy.
For ex: Move ArmPciCpuIo2Dxe to UefiCpuPkg/CpuIo2Dxe. Either merge with
CpuIo2Dxe or add something like MmioCpuIo2Dxe. I think you can take this
approach.
The recommendation I got from Mike earlier was:
MdePkg for libraries, UefiCpuPkg for drivers and OvmfPkg for purely
Qemu specific. Adding new things in MdeModulePkg was not recommended.
Thanks,
Sunil
>
> Thanks,
> Chao
> 在 2023/11/7 17:42, Gerd Hoffmann 写道:
> > On Mon, Nov 06, 2023 at 11:29:20AM +0800, Chao Li wrote:
> > > Add PciCpuIo2Dxe for LoongArch, this module is similar to
> > > ArmPciCpuIo2Dxe drvier.
> > What are the differences to ArmPciCpuIo2Dxe?
> > On a quick glance I can't see anything arch-specific here.
> >
> > Maybe we should find a better place for ArmPciCpuIo2Dxe so loongarch
> > can use it without copying the code?
> >
> > take care,
> > Gerd
> >
> >
> >
> >
> >
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110934): https://edk2.groups.io/g/devel/message/110934
Mute This Topic: https://groups.io/mt/102413880/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module
2023-11-08 23:11 ` Sunil V L
@ 2023-11-10 3:31 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-10 3:31 UTC (permalink / raw)
To: Sunil V L, devel
Cc: kraxel, Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li,
Bibo Mao, Gerd Hoffmann
[-- Attachment #1: Type: text/plain, Size: 2032 bytes --]
Hi Sunil,
Ok, I will give it try, I'm leaning towards moving this driver to
UefiCpuPkg and merging it with CpuIo2Dxe with two "inf" files which will
be named CpuIo2Dxe.inf and MmioCpu2Dxe.inf, do you think this way is better?
Thanks,
Chao
在 2023/11/9 07:11, Sunil V L 写道:
> On Tue, Nov 07, 2023 at 06:03:43PM +0800, Chao Li wrote:
>> Hi Gerd,
>>
>> Yes, you are right, this driver could probably be located somewhere else
>> where other ARCH can easily use it, but I can not find the right place,
>> maybe MdeModulePkg or MdePkg? I also feel that something is not quite right
>> about these two places...
>>
> Hi Chao,
>
> It was in my TODO list and somehow never got time, is to migrate some of
> these drivers and libraries to common place and use them instead of
> copy.
>
> For ex: Move ArmPciCpuIo2Dxe to UefiCpuPkg/CpuIo2Dxe. Either merge with
> CpuIo2Dxe or add something like MmioCpuIo2Dxe. I think you can take this
> approach.
>
> The recommendation I got from Mike earlier was:
> MdePkg for libraries, UefiCpuPkg for drivers and OvmfPkg for purely
> Qemu specific. Adding new things in MdeModulePkg was not recommended.
>
> Thanks,
> Sunil
>
>> Thanks,
>> Chao
>> 在 2023/11/7 17:42, Gerd Hoffmann 写道:
>>> On Mon, Nov 06, 2023 at 11:29:20AM +0800, Chao Li wrote:
>>>> Add PciCpuIo2Dxe for LoongArch, this module is similar to
>>>> ArmPciCpuIo2Dxe drvier.
>>> What are the differences to ArmPciCpuIo2Dxe?
>>> On a quick glance I can't see anything arch-specific here.
>>>
>>> Maybe we should find a better place for ArmPciCpuIo2Dxe so loongarch
>>> can use it without copying the code?
>>>
>>> take care,
>>> Gerd
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111008): https://edk2.groups.io/g/devel/message/111008
Mute This Topic: https://groups.io/mt/102413880/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 3560 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 18/30] OvmfPkg/LoongArchVirt: Add stable timer driver
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (16 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 17/30] OvmfPkg/LoongArchVirt: Add PciCpuIo2Dxe module Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 19/30] OvmfPkg/LoongArchVirt: Add a NULL library named CollectApResouceLibNull Chao Li
` (14 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Baoqi Zhang
Add a CPU timer driver named StableTimerDxe, which proviedes
EFI_TIMER_ARCH_PROTOCOL for LoongArch.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
---
.../Drivers/StableTimerDxe/Timer.c | 381 ++++++++++++++++++
.../Drivers/StableTimerDxe/Timer.h | 127 ++++++
.../Drivers/StableTimerDxe/TimerDxe.inf | 41 ++
3 files changed, 549 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.c
create mode 100644 OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.h
create mode 100644 OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf
diff --git a/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.c b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.c
new file mode 100644
index 0000000000..9f0feaa786
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.c
@@ -0,0 +1,381 @@
+/** @file
+ Timer Architectural Protocol as defined in the DXE CIS
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Protocol/Cpu.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include "Timer.h"
+
+//
+// The handle onto which the Timer Architectural Protocol will be installed
+//
+EFI_HANDLE mTimerHandle = NULL;
+EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL;
+
+//
+// The Timer Architectural Protocol that this driver produces
+//
+EFI_TIMER_ARCH_PROTOCOL mTimer = {
+ TimerDriverRegisterHandler,
+ TimerDriverSetTimerPeriod,
+ TimerDriverGetTimerPeriod,
+ TimerDriverGenerateSoftInterrupt
+};
+
+//
+// Pointer to the CPU Architectural Protocol instance
+//
+EFI_CPU_ARCH_PROTOCOL *mCpu;
+
+//
+// The notification function to call on every timer interrupt.
+// A bug in the compiler prevents us from initializing this here.
+//
+EFI_TIMER_NOTIFY mTimerNotifyFunction;
+
+/**
+ Sets the counter value for timer.
+
+ @param Count The 16-bit counter value to program into stable timer.
+
+ @retval VOID
+**/
+VOID
+SetPitCount (
+ IN UINT64 Count
+ )
+{
+ if (Count <= 4) {
+ return;
+ }
+
+ Count &= LOONGARCH_CSR_TMCFG_TIMEVAL;
+ Count |= LOONGARCH_CSR_TMCFG_EN | LOONGARCH_CSR_TMCFG_PERIOD;
+ CsrWrite (LOONGARCH_CSR_TMCFG, Count);
+}
+
+/**
+ Timer Interrupt Handler.
+
+ @param InterruptType The type of interrupt that occurred
+ @param SystemContext A pointer to the system context when the interrupt occurred
+
+ @retval VOID
+**/
+VOID
+EFIAPI
+TimerInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ EFI_TPL OriginalTPL;
+
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+
+ //
+ // Clear interrupt.
+ //
+ CsrWrite (LOONGARCH_CSR_TINTCLR, 0x1);
+
+ if (mTimerNotifyFunction != NULL) {
+ //
+ // @bug : This does not handle missed timer interrupts
+ //
+ mTimerNotifyFunction (mTimerPeriod);
+ }
+
+ gBS->RestoreTPL (OriginalTPL);
+}
+
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires. This
+ function executes at TPL_HIGH_LEVEL. The DXE Core will
+ register a handler for the timer interrupt, so it can know
+ how much time has passed. This information is used to
+ signal timer based events. NULL will unregister the handler.
+
+ @retval EFI_SUCCESS The timer handler was registered.
+ @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_DEVICE_ERROR The timer handler could not be registered.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ )
+{
+ //
+ // Check for invalid parameters
+ //
+ if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ mTimerNotifyFunction = NotifyFunction;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ )
+{
+ UINT64 TimerCount;
+
+ if (TimerPeriod == 0) {
+ //
+ // Disable timer interrupt for a TimerPeriod of 0
+ //
+ mCpu->DisableInterrupt (mCpu);
+ } else {
+ TimerCount = TimerPeriod * GetPerformanceCounterProperties (NULL, NULL) / 10000000ULL;
+
+ if (TimerCount >= BIT48) {
+ TimerCount = 0;
+ }
+
+ //
+ // Program the stable timer with the new count value
+ //
+ mTimerTicks = TimerCount;
+ SetPitCount (TimerCount);
+
+ //
+ // Enable timer interrupt
+ //
+ mCpu->EnableInterrupt (mCpu);
+ }
+
+ //
+ // Save the new timer period
+ //
+ mTimerPeriod = TimerPeriod;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+{
+ if (TimerPeriod == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerPeriod = mTimerPeriod;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Disable the timer
+ DXE Core will disable the timer after all the event handlers have run.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+ExitBootServicesEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ /*
+ * Disable timer interrupt when exiting boot service
+ */
+ CsrWrite (LOONGARCH_CSR_TMCFG, 0x0);
+}
+
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler ()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Initialize the Timer Architectural Protocol driver
+
+ @param ImageHandle ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Timer Architectural Protocol created
+ @retval EFI_OUT_OF_RESOURCES Not enough resources available to initialize driver.
+ @retval EFI_DEVICE_ERROR A device error occurred attempting to initialize the driver.
+**/
+EFI_STATUS
+EFIAPI
+StableTimerDriverInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINT32 TimerVector;
+
+ //
+ // Initialize the pointer to our notify function.
+ //
+ mTimerNotifyFunction = NULL;
+
+ //
+ // Make sure the Timer Architectural Protocol is not already installed in the system
+ //
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiTimerArchProtocolGuid);
+
+ //
+ // Find the CPU architectural protocol.
+ //
+ Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&mCpu);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Force the timer to be disabled
+ //
+ Status = TimerDriverSetTimerPeriod (&mTimer, 0);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Calculate const frequence
+ //
+ DEBUG ((
+ DEBUG_INFO,
+ "===========Stable timer freq %d Hz=============\n",
+ GetPerformanceCounterProperties (NULL, NULL)
+ ));
+
+ //
+ // Install interrupt handler for Stable Timer #0 (ISA IRQ0)
+ //
+ TimerVector = EXCEPT_LOONGARCH_INT_TIMER;
+ Status = mCpu->RegisterInterruptHandler (mCpu, TimerVector, TimerInterruptHandler);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Enable TI local timer interrupt
+ //
+ EnableLocalInterrupts (1 << EXCEPT_LOONGARCH_INT_TIMER);
+
+ //
+ // Force the timer to be enabled at its default period
+ //
+ Status = TimerDriverSetTimerPeriod (&mTimer, DEFAULT_TIMER_TICK_DURATION);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Install the Timer Architectural Protocol onto a new handle
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mTimerHandle,
+ &gEfiTimerArchProtocolGuid,
+ &mTimer,
+ NULL
+ );
+
+ ASSERT_EFI_ERROR (Status);
+
+ // Register for an ExitBootServicesEvent
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_NOTIFY,
+ ExitBootServicesEvent,
+ NULL,
+ &EfiExitBootServicesEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.h b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.h
new file mode 100644
index 0000000000..12a59af1ed
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/Timer.h
@@ -0,0 +1,127 @@
+/** @file
+ Private data structures
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef TIMER_H_
+#define TIMER_H_
+
+#include <Protocol/Timer.h>
+
+#define DEFAULT_TIMER_TICK_DURATION 100000 // 10ms = 100000 100 ns units
+
+//
+// The current period of the timer interrupt
+//
+volatile UINT64 mTimerPeriod = 0;
+volatile UINT64 mTimerTicks = 0;
+
+/**
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ );
+
+/**
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ );
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ );
+
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ );
+
+#endif // TIMER_H_
diff --git a/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf
new file mode 100644
index 0000000000..12c78a4088
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf
@@ -0,0 +1,41 @@
+## @file
+# Stable timer driver that provides Timer Arch protocol.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = Timer
+ MODULE_UNI_FILE = Timer.uni
+ FILE_GUID = AEBE2648-47A9-40FA-83FD-06AA88443BB2
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = StableTimerDriverInitialize
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ Timer.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiBootServicesTableLib
+ BaseLib
+ DebugLib
+ UefiDriverEntryPoint
+ IoLib
+ TimerLib
+
+[Protocols]
+ gEfiCpuArchProtocolGuid ## CONSUMES
+ gEfiTimerArchProtocolGuid ## PRODUCES
+
+[depex]
+ gEfiCpuArchProtocolGuid
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110722): https://edk2.groups.io/g/devel/message/110722
Mute This Topic: https://groups.io/mt/102413883/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 19/30] OvmfPkg/LoongArchVirt: Add a NULL library named CollectApResouceLibNull
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (17 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 18/30] OvmfPkg/LoongArchVirt: Add stable timer driver Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library Chao Li
` (13 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann
This Library is used to collect APs resources, but is currently NULL
for OvmfPkg, because it is not used by the LoongArch virtual machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
.../CollectApResourceLibNull.c | 35 +++++++++++++++++++
.../CollectApResourceLibNull.inf | 32 +++++++++++++++++
.../CollectApResourceLibNull.uni | 9 +++++
3 files changed, 76 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.uni
diff --git a/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.c b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.c
new file mode 100644
index 0000000000..528914973e
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.c
@@ -0,0 +1,35 @@
+/** @file
+ LoongArch64 CPU Collect AP resource NULL Library functions.
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include "../../../UefiCpuPkg/Library/LoongArch64MpInitLib/MpLib.h"
+
+VOID
+SaveProcessorResourceData (
+ IN PROCESSOR_RESOURCE_DATA *
+ );
+
+VOID
+EFIAPI
+SaveProcessorResource (
+ PROCESSOR_RESOURCE_DATA *mProcessorResource
+ )
+{
+ SaveProcessorResourceData (mProcessorResource);
+}
+
+VOID
+EFIAPI
+CollectAllProcessorResource (
+ VOID
+ )
+{
+ return;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.inf b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.inf
new file mode 100644
index 0000000000..d8d281421c
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.inf
@@ -0,0 +1,32 @@
+## @file
+# LoongArch64 CPU Collect AP resource NULL Library.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = CollectApResourceLibNull
+ MODULE_UNI_FILE = CollectApResourceLibNull.uni
+ FILE_GUID = 8C3B54BF-6A9F-E8B4-4D57-67B3AB578DD6
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.1
+ LIBRARY_CLASS = BaseLib
+
+[Sources.common]
+ CollectApResourceLibNull.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ MemoryAllocationLib
+ HobLib
+ SynchronizationLib
+
+[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber
diff --git a/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.uni b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.uni
new file mode 100644
index 0000000000..701e2d7e6b
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.uni
@@ -0,0 +1,9 @@
+// @file
+// LoongArch64 CPU Collect AP resource NULL Library.
+//
+// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+
+#string STR_MODULE_ABSTRACT #language en-US "CPU Collect AP resource NULL Library."
+
+#string STR_MODULE_DESCRIPTION #language en-US "CPU Collect AP resource NULL Library."
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110723): https://edk2.groups.io/g/devel/message/110723
Mute This Topic: https://groups.io/mt/102413884/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (18 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 19/30] OvmfPkg/LoongArchVirt: Add a NULL library named CollectApResouceLibNull Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-07 9:47 ` Gerd Hoffmann
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 21/30] OvmfPkg/LoongArchVirt: Add real time clock library Chao Li
` (12 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li
Add two libraries named Fdt16550SerialPortHookLib and
EarlyFdtSerialPortLib16550, requested by LoongArch virtual
machine.
The Fdt16550SerialProtHookLib is referenced from ArmVirtPkg.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
---
.../EarlyFdtSerialPortLib16550.c | 824 ++++++++++++++++++
.../EarlyFdtSerialPortLib16550.inf | 47 +
.../EarlyFdt16550SerialPortHookLib.c | 136 +++
.../EarlyFdt16550SerialPortHookLib.inf | 36 +
.../Fdt16550SerialPortHookLib.c | 41 +
.../Fdt16550SerialPortHookLib.inf | 33 +
.../Fdt16550SerialPortHookLib.uni | 13 +
7 files changed, 1130 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
diff --git a/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.c b/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.c
new file mode 100644
index 0000000000..77ced19566
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.c
@@ -0,0 +1,824 @@
+/** @file
+ 16550 UART Serial Port library functions
+
+ Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+#include <Library/PlatformHookLib.h>
+#include <Library/BaseLib.h>
+#include <Guid/FdtHob.h>
+#include <libfdt.h>
+
+//
+// PCI Defintions.
+//
+#define PCI_BRIDGE_32_BIT_IO_SPACE 0x01
+
+//
+// 16550 UART register offsets and bitfields
+//
+#define R_UART_RXBUF 0 // LCR_DLAB = 0
+#define R_UART_TXBUF 0 // LCR_DLAB = 0
+#define R_UART_BAUD_LOW 0 // LCR_DLAB = 1
+#define R_UART_BAUD_HIGH 1 // LCR_DLAB = 1
+#define R_UART_IER 1 // LCR_DLAB = 0
+#define R_UART_FCR 2
+#define B_UART_FCR_FIFOE BIT0
+#define B_UART_FCR_FIFO64 BIT5
+#define R_UART_LCR 3
+#define B_UART_LCR_DLAB BIT7
+#define R_UART_MCR 4
+#define B_UART_MCR_DTRC BIT0
+#define B_UART_MCR_RTS BIT1
+#define R_UART_LSR 5
+#define B_UART_LSR_RXRDY BIT0
+#define B_UART_LSR_TXRDY BIT5
+#define B_UART_LSR_TEMT BIT6
+#define R_UART_MSR 6
+#define B_UART_MSR_CTS BIT4
+#define B_UART_MSR_DSR BIT5
+#define B_UART_MSR_RI BIT6
+#define B_UART_MSR_DCD BIT7
+
+EFI_STATUS
+EFIAPI
+GetSerialConsolePortAddress (
+ IN CONST VOID *Fdt,
+ OUT UINT64 *SerialConsoleAddress
+ );
+
+/**
+ Read an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is read from
+ MMIO space. If PcdSerialUseMmio is FALSE, then the value is read from I/O space. The
+ parameter Offset is added to the base address of the 16550 registers that is specified
+ by PcdSerialRegisterBase. PcdSerialRegisterAccessWidth specifies the MMIO space access
+ width and defaults to 8 bit access, and supports 8 or 32 bit access.
+
+ @param Base The base address register of UART device.
+ @param Offset The offset of the 16550 register to read.
+
+ @return The value read from the 16550 register.
+**/
+UINT8
+SerialPortReadRegister (
+ UINTN Base,
+ UINTN Offset
+ )
+{
+ if (PcdGetBool (PcdSerialUseMmio)) {
+ if (PcdGet8 (PcdSerialRegisterAccessWidth) == 32) {
+ return (UINT8)MmioRead32 (Base + Offset * PcdGet32 (PcdSerialRegisterStride));
+ }
+
+ return MmioRead8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride));
+ } else {
+ return IoRead8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride));
+ }
+}
+
+/**
+ Write an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is written to
+ MMIO space. If PcdSerialUseMmio is FALSE, then the value is written to I/O space. The
+ parameter Offset is added to the base address of the 16550 registers that is specified
+ by PcdSerialRegisterBase. PcdSerialRegisterAccessWidth specifies the MMIO space access
+ width and defaults to 8 bit access, and supports 8 or 32 bit access.
+
+ @param Base The base address register of UART device.
+ @param Offset The offset of the 16550 register to write.
+ @param Value The value to write to the 16550 register specified by Offset.
+
+ @return The value written to the 16550 register.
+**/
+UINT8
+SerialPortWriteRegister (
+ UINTN Base,
+ UINTN Offset,
+ UINT8 Value
+ )
+{
+ if (PcdGetBool (PcdSerialUseMmio)) {
+ if (PcdGet8 (PcdSerialRegisterAccessWidth) == 32) {
+ return (UINT8)MmioWrite32 (Base + Offset * PcdGet32 (PcdSerialRegisterStride), (UINT8)Value);
+ }
+
+ return MmioWrite8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride), Value);
+ } else {
+ return IoWrite8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride), Value);
+ }
+}
+
+/**
+ Retrieve the I/O or MMIO base address register for the PCI UART device.
+
+ This function assumes Root Bus Numer is Zero, and enables I/O and MMIO in PCI UART
+ Device if they are not already enabled.
+
+ @return The base address register of the UART device.
+**/
+UINTN
+GetSerialRegisterBase (
+ VOID
+ )
+{
+ VOID *Base;
+ RETURN_STATUS Status;
+ UINT64 SerialConsoleAddress;
+
+ Base = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ Status = GetSerialConsolePortAddress (Base, &SerialConsoleAddress);
+ if (RETURN_ERROR (Status)) {
+ return (UINTN)0;
+ }
+
+ return SerialConsoleAddress;
+}
+
+/**
+ Return whether the hardware flow control signal allows writing.
+
+ @param SerialRegisterBase The base address register of UART device.
+
+ @retval TRUE The serial port is writable.
+ @retval FALSE The serial port is not writable.
+**/
+BOOLEAN
+SerialPortWritable (
+ UINTN SerialRegisterBase
+ )
+{
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ if (PcdGetBool (PcdSerialDetectCable)) {
+ //
+ // Wait for both DSR and CTS to be set
+ // DSR is set if a cable is connected.
+ // CTS is set if it is ok to transmit data
+ //
+ // DSR CTS Description Action
+ // === === ======================================== ========
+ // 0 0 No cable connected. Wait
+ // 0 1 No cable connected. Wait
+ // 1 0 Cable connected, but not clear to send. Wait
+ // 1 1 Cable connected, and clear to send. Transmit
+ //
+ return (BOOLEAN)((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) == (B_UART_MSR_DSR | B_UART_MSR_CTS));
+ } else {
+ //
+ // Wait for both DSR and CTS to be set OR for DSR to be clear.
+ // DSR is set if a cable is connected.
+ // CTS is set if it is ok to transmit data
+ //
+ // DSR CTS Description Action
+ // === === ======================================== ========
+ // 0 0 No cable connected. Transmit
+ // 0 1 No cable connected. Transmit
+ // 1 0 Cable connected, but not clear to send. Wait
+ // 1 1 Cable connected, and clar to send. Transmit
+ //
+ return (BOOLEAN)((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) != (B_UART_MSR_DSR));
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ Initialize the serial device hardware.
+
+ If no initialization is required, then return RETURN_SUCCESS.
+ If the serial device was successfully initialized, then return RETURN_SUCCESS.
+ If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+ VOID
+ )
+{
+ UINTN SerialRegisterBase;
+ UINT32 Divisor;
+ UINT32 CurrentDivisor;
+ BOOLEAN Initialized;
+
+ //
+ // Calculate divisor for baud generator
+ // Ref_Clk_Rate / Baud_Rate / 16
+ //
+ Divisor = PcdGet32 (PcdSerialClockRate) / (PcdGet32 (PcdSerialBaudRate) * 16);
+ if ((PcdGet32 (PcdSerialClockRate) % (PcdGet32 (PcdSerialBaudRate) * 16)) >= PcdGet32 (PcdSerialBaudRate) * 8) {
+ Divisor++;
+ }
+
+ //
+ // Get the base address of the serial port in either I/O or MMIO space
+ //
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ //
+ // See if the serial port is already initialized
+ //
+ Initialized = TRUE;
+ if ((SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) & 0x3F) != (PcdGet8 (PcdSerialLineControl) & 0x3F)) {
+ Initialized = FALSE;
+ }
+
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) | B_UART_LCR_DLAB));
+ CurrentDivisor = SerialPortReadRegister (SerialRegisterBase, R_UART_BAUD_HIGH) << 8;
+ CurrentDivisor |= (UINT32)SerialPortReadRegister (SerialRegisterBase, R_UART_BAUD_LOW);
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) & ~B_UART_LCR_DLAB));
+ if (CurrentDivisor != Divisor) {
+ Initialized = FALSE;
+ }
+
+ if (Initialized) {
+ return RETURN_SUCCESS;
+ }
+
+ //
+ // Wait for the serial port to be ready.
+ // Verify that both the transmit FIFO and the shift register are empty.
+ //
+ while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) != (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) {
+ }
+
+ //
+ // Configure baud rate
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, B_UART_LCR_DLAB);
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_HIGH, (UINT8)(Divisor >> 8));
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_LOW, (UINT8)(Divisor & 0xff));
+
+ //
+ // Clear DLAB and configure Data Bits, Parity, and Stop Bits.
+ // Strip reserved bits from PcdSerialLineControl
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(PcdGet8 (PcdSerialLineControl) & 0x3F));
+
+ //
+ // Enable and reset FIFOs
+ // Strip reserved bits from PcdSerialFifoControl
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, 0x00);
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, (UINT8)(PcdGet8 (PcdSerialFifoControl) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)));
+
+ //
+ // Set FIFO Polled Mode by clearing IER after setting FCR
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_IER, 0x00);
+
+ //
+ // Put Modem Control Register(MCR) into its reset state of 0x00.
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, 0x00);
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Write data from buffer to serial device.
+
+ Writes NumberOfBytes data bytes from Buffer to the serial device.
+ The number of bytes actually written to the serial device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+
+ If Buffer is NULL, then ASSERT().
+
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the serial device.
+ If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN SerialRegisterBase;
+ UINTN Result;
+ UINTN Index;
+ UINTN FifoSize;
+
+ if (Buffer == NULL) {
+ return 0;
+ }
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return 0;
+ }
+
+ if (NumberOfBytes == 0) {
+ //
+ // Flush the hardware
+ //
+
+ //
+ // Wait for both the transmit FIFO and shift register empty.
+ //
+ while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) != (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) {
+ }
+
+ //
+ // Wait for the hardware flow control signal
+ //
+ while (!SerialPortWritable (SerialRegisterBase)) {
+ }
+
+ return 0;
+ }
+
+ //
+ // Compute the maximum size of the Tx FIFO
+ //
+ FifoSize = 1;
+ if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFOE) != 0) {
+ if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFO64) == 0) {
+ FifoSize = 16;
+ } else {
+ FifoSize = PcdGet32 (PcdSerialExtendedTxFifoSize);
+ }
+ }
+
+ Result = NumberOfBytes;
+ while (NumberOfBytes != 0) {
+ //
+ // Wait for the serial port to be ready, to make sure both the transmit FIFO
+ // and shift register empty.
+ //
+ while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) != (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) {
+ }
+
+ //
+ // Fill then entire Tx FIFO
+ //
+ for (Index = 0; Index < FifoSize && NumberOfBytes != 0; Index++, NumberOfBytes--, Buffer++) {
+ //
+ // Wait for the hardware flow control signal
+ //
+ while (!SerialPortWritable (SerialRegisterBase)) {
+ }
+
+ //
+ // Write byte to the transmit buffer.
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_TXBUF, *Buffer);
+ }
+ }
+
+ return Result;
+}
+
+/**
+ Reads data from a serial device into a buffer.
+
+ @param Buffer Pointer to the data buffer to store the data read from the serial device.
+ @param NumberOfBytes Number of bytes to read from the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes read from the serial device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+ OUT UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN SerialRegisterBase;
+ UINTN Result;
+ UINT8 Mcr;
+
+ if (NULL == Buffer) {
+ return 0;
+ }
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return 0;
+ }
+
+ Mcr = (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) & ~B_UART_MCR_RTS);
+
+ for (Result = 0; NumberOfBytes-- != 0; Result++, Buffer++) {
+ //
+ // Wait for the serial port to have some data.
+ //
+ while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_RXRDY) == 0) {
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ //
+ // Set RTS to let the peer send some data
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(Mcr | B_UART_MCR_RTS));
+ }
+ }
+
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ //
+ // Clear RTS to prevent peer from sending data
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, Mcr);
+ }
+
+ //
+ // Read byte from the receive buffer.
+ //
+ *Buffer = SerialPortReadRegister (SerialRegisterBase, R_UART_RXBUF);
+ }
+
+ return Result;
+}
+
+/**
+ Polls a serial device to see if there is any data waiting to be read.
+
+ Polls aserial device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the serial device, then TRUE is returned.
+ If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+ @retval TRUE Data is waiting to be read from the serial device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+ VOID
+ )
+{
+ UINTN SerialRegisterBase;
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return FALSE;
+ }
+
+ //
+ // Read the serial port status
+ //
+ if ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_RXRDY) != 0) {
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ //
+ // Clear RTS to prevent peer from sending data
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) & ~B_UART_MCR_RTS));
+ }
+
+ return TRUE;
+ }
+
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ //
+ // Set RTS to let the peer send some data
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) | B_UART_MCR_RTS));
+ }
+
+ return FALSE;
+}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ UINTN SerialRegisterBase;
+ UINT8 Mcr;
+
+ //
+ // First determine the parameter is invalid.
+ //
+ if ((Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
+ EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) != 0)
+ {
+ return RETURN_UNSUPPORTED;
+ }
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return RETURN_UNSUPPORTED;
+ }
+
+ //
+ // Read the Modem Control Register.
+ //
+ Mcr = SerialPortReadRegister (SerialRegisterBase, R_UART_MCR);
+ Mcr &= (~(B_UART_MCR_DTRC | B_UART_MCR_RTS));
+
+ if ((Control & EFI_SERIAL_DATA_TERMINAL_READY) == EFI_SERIAL_DATA_TERMINAL_READY) {
+ Mcr |= B_UART_MCR_DTRC;
+ }
+
+ if ((Control & EFI_SERIAL_REQUEST_TO_SEND) == EFI_SERIAL_REQUEST_TO_SEND) {
+ Mcr |= B_UART_MCR_RTS;
+ }
+
+ //
+ // Write the Modem Control Register.
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, Mcr);
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ UINTN SerialRegisterBase;
+ UINT8 Msr;
+ UINT8 Mcr;
+ UINT8 Lsr;
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return RETURN_UNSUPPORTED;
+ }
+
+ *Control = 0;
+
+ //
+ // Read the Modem Status Register.
+ //
+ Msr = SerialPortReadRegister (SerialRegisterBase, R_UART_MSR);
+
+ if ((Msr & B_UART_MSR_CTS) == B_UART_MSR_CTS) {
+ *Control |= EFI_SERIAL_CLEAR_TO_SEND;
+ }
+
+ if ((Msr & B_UART_MSR_DSR) == B_UART_MSR_DSR) {
+ *Control |= EFI_SERIAL_DATA_SET_READY;
+ }
+
+ if ((Msr & B_UART_MSR_RI) == B_UART_MSR_RI) {
+ *Control |= EFI_SERIAL_RING_INDICATE;
+ }
+
+ if ((Msr & B_UART_MSR_DCD) == B_UART_MSR_DCD) {
+ *Control |= EFI_SERIAL_CARRIER_DETECT;
+ }
+
+ //
+ // Read the Modem Control Register.
+ //
+ Mcr = SerialPortReadRegister (SerialRegisterBase, R_UART_MCR);
+
+ if ((Mcr & B_UART_MCR_DTRC) == B_UART_MCR_DTRC) {
+ *Control |= EFI_SERIAL_DATA_TERMINAL_READY;
+ }
+
+ if ((Mcr & B_UART_MCR_RTS) == B_UART_MCR_RTS) {
+ *Control |= EFI_SERIAL_REQUEST_TO_SEND;
+ }
+
+ if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
+ *Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
+ }
+
+ //
+ // Read the Line Status Register.
+ //
+ Lsr = SerialPortReadRegister (SerialRegisterBase, R_UART_LSR);
+
+ if ((Lsr & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) == (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) {
+ *Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
+ }
+
+ if ((Lsr & B_UART_LSR_RXRDY) == 0) {
+ *Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ UINTN SerialRegisterBase;
+ UINT32 SerialBaudRate;
+ UINTN Divisor;
+ UINT8 Lcr;
+ UINT8 LcrData;
+ UINT8 LcrParity;
+ UINT8 LcrStop;
+
+ SerialRegisterBase = GetSerialRegisterBase ();
+ if (SerialRegisterBase == 0) {
+ return RETURN_UNSUPPORTED;
+ }
+
+ //
+ // Check for default settings and fill in actual values.
+ //
+ if (*BaudRate == 0) {
+ *BaudRate = PcdGet32 (PcdSerialBaudRate);
+ }
+
+ SerialBaudRate = (UINT32)*BaudRate;
+
+ if (*DataBits == 0) {
+ LcrData = (UINT8)(PcdGet8 (PcdSerialLineControl) & 0x3);
+ *DataBits = LcrData + 5;
+ } else {
+ if ((*DataBits < 5) || (*DataBits > 8)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Map 5..8 to 0..3
+ //
+ LcrData = (UINT8)(*DataBits - (UINT8)5);
+ }
+
+ if (*Parity == DefaultParity) {
+ LcrParity = (UINT8)((PcdGet8 (PcdSerialLineControl) >> 3) & 0x7);
+ switch (LcrParity) {
+ case 0:
+ *Parity = NoParity;
+ break;
+
+ case 3:
+ *Parity = EvenParity;
+ break;
+
+ case 1:
+ *Parity = OddParity;
+ break;
+
+ case 7:
+ *Parity = SpaceParity;
+ break;
+
+ case 5:
+ *Parity = MarkParity;
+ break;
+
+ default:
+ break;
+ }
+ } else {
+ switch (*Parity) {
+ case NoParity:
+ LcrParity = 0;
+ break;
+
+ case EvenParity:
+ LcrParity = 3;
+ break;
+
+ case OddParity:
+ LcrParity = 1;
+ break;
+
+ case SpaceParity:
+ LcrParity = 7;
+ break;
+
+ case MarkParity:
+ LcrParity = 5;
+ break;
+
+ default:
+ return RETURN_INVALID_PARAMETER;
+ }
+ }
+
+ if (*StopBits == DefaultStopBits) {
+ LcrStop = (UINT8)((PcdGet8 (PcdSerialLineControl) >> 2) & 0x1);
+ switch (LcrStop) {
+ case 0:
+ *StopBits = OneStopBit;
+ break;
+
+ case 1:
+ if (*DataBits == 5) {
+ *StopBits = OneFiveStopBits;
+ } else {
+ *StopBits = TwoStopBits;
+ }
+
+ break;
+
+ default:
+ break;
+ }
+ } else {
+ switch (*StopBits) {
+ case OneStopBit:
+ LcrStop = 0;
+ break;
+
+ case OneFiveStopBits:
+ case TwoStopBits:
+ LcrStop = 1;
+ break;
+
+ default:
+ return RETURN_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Calculate divisor for baud generator
+ // Ref_Clk_Rate / Baud_Rate / 16
+ //
+ Divisor = PcdGet32 (PcdSerialClockRate) / (SerialBaudRate * 16);
+ if ((PcdGet32 (PcdSerialClockRate) % (SerialBaudRate * 16)) >= SerialBaudRate * 8) {
+ Divisor++;
+ }
+
+ //
+ // Configure baud rate
+ //
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, B_UART_LCR_DLAB);
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_HIGH, (UINT8)(Divisor >> 8));
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_LOW, (UINT8)(Divisor & 0xff));
+
+ //
+ // Clear DLAB and configure Data Bits, Parity, and Stop Bits.
+ // Strip reserved bits from line control value
+ //
+ Lcr = (UINT8)((LcrParity << 3) | (LcrStop << 2) | LcrData);
+ SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(Lcr & 0x3F));
+
+ return RETURN_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf b/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
new file mode 100644
index 0000000000..3a0d856af7
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
@@ -0,0 +1,47 @@
+## @file
+# SerialPortLib instance for 16550 UART.
+#
+# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = EarlySerialPortLib16550
+ FILE_GUID = f4fb883d-8138-4f29-bb0c-c574e9312c74
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.1
+ LIBRARY_CLASS = SerialPortLib
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ IoLib
+ PcdLib
+ FdtLib
+ PlatformHookLib
+
+[Sources]
+ EarlyFdtSerialPortLib16550.c
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth ## SOMETIMES_CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable ## SOMETIMES_CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride ## CONSUMES
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress ## CONSUMES
diff --git a/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000..e19f90c509
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
@@ -0,0 +1,136 @@
+/** @file
+ PEI Phase Early Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020 - 2023, Arm Ltd. All rights reserved.<BR>
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+#include <libfdt.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+/** Get the UART base address of the console serial-port from the DT.
+
+ This function fetches the node referenced in the "stdout-path"
+ property of the "chosen" node and returns the base address of
+ the console UART.
+
+ @param [in] Fdt Pointer to a Flattened Device Tree (Fdt).
+ @param [out] SerialConsoleAddress If success, contains the base address
+ of the console serial-port.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND Console serial-port info not found in DT.
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+**/
+EFI_STATUS
+EFIAPI
+GetSerialConsolePortAddress (
+ IN CONST VOID *Fdt,
+ OUT UINT64 *SerialConsoleAddress
+ )
+{
+ CONST CHAR8 *Prop;
+ INT32 PropSize;
+ CONST CHAR8 *Path;
+ INT32 PathLen;
+ INT32 ChosenNode;
+ INT32 SerialConsoleNode;
+ INT32 Len;
+ CONST CHAR8 *NodeStatus;
+ CONST UINT64 *RegProperty;
+
+ if ((Fdt == NULL) || (fdt_check_header (Fdt) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // The "chosen" node resides at the root of the DT. Fetch it.
+ ChosenNode = fdt_path_offset (Fdt, "/chosen");
+ if (ChosenNode < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ Prop = fdt_getprop (Fdt, ChosenNode, "stdout-path", &PropSize);
+ if (PropSize < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ // Determine the actual path length, as a colon terminates the path.
+ Path = ScanMem8 (Prop, PropSize, ':');
+ if (Path == NULL) {
+ PathLen = AsciiStrLen (Prop);
+ } else {
+ PathLen = Path - Prop;
+ }
+
+ // Aliases cannot start with a '/', so it must be the actual path.
+ if (Prop[0] == '/') {
+ SerialConsoleNode = fdt_path_offset_namelen (Fdt, Prop, PathLen);
+ } else {
+ // Lookup the alias, as this contains the actual path.
+ Path = fdt_get_alias_namelen (Fdt, Prop, PathLen);
+ if (Path == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ SerialConsoleNode = fdt_path_offset (Fdt, Path);
+ }
+
+ NodeStatus = fdt_getprop (Fdt, SerialConsoleNode, "status", &Len);
+ if ((NodeStatus != NULL) && (AsciiStrCmp (NodeStatus, "okay") != 0)) {
+ return EFI_NOT_FOUND;
+ }
+
+ RegProperty = fdt_getprop (Fdt, SerialConsoleNode, "reg", &Len);
+ if (Len != 16) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *SerialConsoleAddress = fdt64_to_cpu (ReadUnaligned64 (RegProperty));
+
+ return EFI_SUCCESS;
+}
+
+/** Platform hook to retrieve the 16550 UART base address from the platform
+ Device tree and store it in the reigster LOONGARCH_CSR_KS1.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_INVALID_PARAMETER A parameter was invalid.
+ @retval RETURN_NOT_FOUND Serial port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ RETURN_STATUS Status;
+ VOID *DeviceTreeBase;
+ UINT64 SerialConsoleAddress;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ DeviceTreeBase = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ if (DeviceTreeBase == NULL) {
+ return RETURN_NOT_FOUND;
+ }
+
+ Status = GetSerialConsolePortAddress (DeviceTreeBase, &SerialConsoleAddress);
+ if (RETURN_ERROR (Status)) {
+ return Status;
+ }
+
+ CsrWrite (LOONGARCH_CSR_KS1, (UINTN)SerialConsoleAddress);
+
+ return RETURN_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000..d37c1f6402
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
@@ -0,0 +1,36 @@
+## @file
+# PEI Phase Early Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = EarlyFdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = 6A5FEBCB-C676-A7C1-A96C-B79D4860EEC5
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|SEC PEI_CORE PEIM
+
+[Sources]
+ EarlyFdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ FdtLib
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[Pcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
diff --git a/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000..46e159d7c2
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
@@ -0,0 +1,41 @@
+/** @file
+ Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+/** Platform hook to retrieve the 16550 UART base address from register
+ LOONGARCH_CSR_KS1 that caches the UART base address from early boot
+ stage and store it in PcdSerialRegisterBase.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_NOT_FOUND Serial Port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ UINT64 *UartBase;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ *UartBase = CsrRead (LOONGARCH_CSR_KS1);
+
+ return (RETURN_STATUS)PcdSet64S (PcdSerialRegisterBase, (UINTN)*UartBase);
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000..3db9de4f7e
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
@@ -0,0 +1,33 @@
+## @file
+# Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = Fdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = 808335DB-220E-A353-887C-9AA1B7D433A1
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|DXE_CORE DXE_DRIVER UEFI_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION
+ CONSTRUCTOR = PlatformHookSerialPortInitialize
+
+[Sources]
+ Fdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
diff --git a/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
new file mode 100644
index 0000000000..70356534e9
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
@@ -0,0 +1,13 @@
+// /** @file
+// Platform Hook Library instance for 16550 Uart.
+//
+//
+// Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Platform Hook Library instance for 16550 Uart."
+
+#string STR_MODULE_DESCRIPTION #language en-US "Platform Hook Library instance for 16550 Uart."
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110724): https://edk2.groups.io/g/devel/message/110724
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library Chao Li
@ 2023-11-07 9:47 ` Gerd Hoffmann
2023-11-07 10:12 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Gerd Hoffmann @ 2023-11-07 9:47 UTC (permalink / raw)
To: Chao Li; +Cc: devel, Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li
On Mon, Nov 06, 2023 at 11:29:45AM +0800, Chao Li wrote:
> Add two libraries named Fdt16550SerialPortHookLib and
> EarlyFdtSerialPortLib16550, requested by LoongArch virtual
> machine.
Moving libs from ArmVirtPkg to OvmfPkg (so non-arm archs can use the
libs too) is perfectly fine. I think this should be done here instead
of copying the code.
I suspect the same applies to some of the following patches in this
series (looked at the subject lines only so far though).
take care,
Gerd
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110830): https://edk2.groups.io/g/devel/message/110830
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-07 9:47 ` Gerd Hoffmann
@ 2023-11-07 10:12 ` Chao Li
2023-11-08 22:21 ` Laszlo Ersek
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-07 10:12 UTC (permalink / raw)
To: devel, kraxel; +Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li
[-- Attachment #1: Type: text/plain, Size: 1162 bytes --]
Hi Gerd,
These two libraries is not only copy code, the way of obtain the serial
base address is different from ARM, and the early serial port output
also different from ARM, so these two libraries are LoongArch specific.
Thanks,
Chao
在 2023/11/7 17:47, Gerd Hoffmann 写道:
> On Mon, Nov 06, 2023 at 11:29:45AM +0800, Chao Li wrote:
>> Add two libraries named Fdt16550SerialPortHookLib and
>> EarlyFdtSerialPortLib16550, requested by LoongArch virtual
>> machine.
> Moving libs from ArmVirtPkg to OvmfPkg (so non-arm archs can use the
> libs too) is perfectly fine. I think this should be done here instead
> of copying the code.
>
> I suspect the same applies to some of the following patches in this
> series (looked at the subject lines only so far though).
>
> take care,
> Gerd
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110833): https://edk2.groups.io/g/devel/message/110833
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 2381 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-07 10:12 ` Chao Li
@ 2023-11-08 22:21 ` Laszlo Ersek
2023-11-10 4:51 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-08 22:21 UTC (permalink / raw)
To: devel, lichao, kraxel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li
On 11/7/23 11:12, Chao Li wrote:
> Hi Gerd,
>
> These two libraries is not only copy code, the way of obtain the serial
> base address is different from ARM, and the early serial port output
> also different from ARM, so these two libraries are LoongArch specific.
I think we're going to have to go through the design with "baby steps".
The commit message of the patch is empty.
Please don't expect reviewers to "reverse engineer" the design from the
code. That's hugely taxing. It's hard enough to review code when we
precisey know in advance, from the commit message, what the code will
try to achieve.
You are saying that the way to obtain serial base address is different
from ARM, yet the GetSerialConsolePortAddress() function looks very
similar to the function that I *replaced* in recent commits eb83b5330961
("ArmVirtPkg: introduce FdtSerialPortAddressLib", 2023-10-26) and
f078a6fdd4d7 ("ArmVirtPkg/Fdt16550SerialPortHookLib: rebase to
FdtSerialPortAddressLib", 2023-10-26).
So there are two issues with your GetSerialConsolePortAddress() function
immediately, I would say:
- you say that it's different from ARM, but it seems to parse the DTB
identically (or mostly identically -- I'm speaking from memory),
- I factored out the subject DTB parsing logic in the above-noted
commits recently, so even if your GetSerialConsolePortAddress() function
is *supposed* to parse the DTB identically to ARM, then the way to
employ that logic is different; it should be reused, not duplicated.
Now that you have a running prototype (basically evidence that the port
to this new architecture can be done), can we go through the design of
each component (library, driver etc) one by one? Dumping the whole thing
on reviewers all at once, with little documentation, is not helpful. We
basically need to start with the specification of each of your modules.
See where the existing components in edk2 are not good enough or not
flexible enough, etc.
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110931): https://edk2.groups.io/g/devel/message/110931
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-08 22:21 ` Laszlo Ersek
@ 2023-11-10 4:51 ` Chao Li
2023-11-13 10:45 ` Laszlo Ersek
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-10 4:51 UTC (permalink / raw)
To: Laszlo Ersek, devel, kraxel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li
[-- Attachment #1: Type: text/plain, Size: 3719 bytes --]
Hi Laszlo,
Sorry, it is my fault, I should separate this this patch for two
standalone patches, and with some detailed commit message. I will fix
this in V3.
Currently, there are two libraries are not independent, so I guess you
are talking about Fdt16550SerialPortHookLib. I would say that the
different is not in GetSerialConsolePortAddress, the logic about this
function is same to ARM, the different is in
PlatformHookSerialPortInitialize. Since some platform do not require
running code on memory during the PEI phase, so the ARM version of
PlatformHookSerialPortInitialize will use PcdSet to set a PCD value, if
the memory is not ready, this funciton can not be used. So this library
is override from ArmVirtPkg to LongArchVirt.
BTW, the new library FdtSerialProtAddressLib which you committed a few
days ago, I will look into it and try it. Roughly speaking, it is look
like the code for obtaining the serial port address is sparated from the
HookLIb. I have a question, can I move this library to OvmfPkg so that
other ARCH can use it easily?
Regarding FdtSerialPortAddressLib, I would like to say that it was not
committed when I porting LoongArchVirt, my code base is based on
stable202308, so I don't know you committed a new library, sorry.
Thanks,
Chao
在 2023/11/9 06:21, Laszlo Ersek 写道:
> On 11/7/23 11:12, Chao Li wrote:
>> Hi Gerd,
>>
>> These two libraries is not only copy code, the way of obtain the serial
>> base address is different from ARM, and the early serial port output
>> also different from ARM, so these two libraries are LoongArch specific.
> I think we're going to have to go through the design with "baby steps".
>
> The commit message of the patch is empty.
>
> Please don't expect reviewers to "reverse engineer" the design from the
> code. That's hugely taxing. It's hard enough to review code when we
> precisey know in advance, from the commit message, what the code will
> try to achieve.
>
> You are saying that the way to obtain serial base address is different
> from ARM, yet the GetSerialConsolePortAddress() function looks very
> similar to the function that I *replaced* in recent commits eb83b5330961
> ("ArmVirtPkg: introduce FdtSerialPortAddressLib", 2023-10-26) and
> f078a6fdd4d7 ("ArmVirtPkg/Fdt16550SerialPortHookLib: rebase to
> FdtSerialPortAddressLib", 2023-10-26).
>
> So there are two issues with your GetSerialConsolePortAddress() function
> immediately, I would say:
>
> - you say that it's different from ARM, but it seems to parse the DTB
> identically (or mostly identically -- I'm speaking from memory),
>
> - I factored out the subject DTB parsing logic in the above-noted
> commits recently, so even if your GetSerialConsolePortAddress() function
> is *supposed* to parse the DTB identically to ARM, then the way to
> employ that logic is different; it should be reused, not duplicated.
>
> Now that you have a running prototype (basically evidence that the port
> to this new architecture can be done), can we go through the design of
> each component (library, driver etc) one by one? Dumping the whole thing
> on reviewers all at once, with little documentation, is not helpful. We
> basically need to start with the specification of each of your modules.
> See where the existing components in edk2 are not good enough or not
> flexible enough, etc.
>
> Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111010): https://edk2.groups.io/g/devel/message/111010
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 5157 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library
2023-11-10 4:51 ` Chao Li
@ 2023-11-13 10:45 ` Laszlo Ersek
0 siblings, 0 replies; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-13 10:45 UTC (permalink / raw)
To: Chao Li, devel, kraxel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li
On 11/10/23 05:51, Chao Li wrote:
> Hi Laszlo,
>
> Sorry, it is my fault, I should separate this this patch for two
> standalone patches, and with some detailed commit message. I will fix
> this in V3.
>
> Currently, there are two libraries are not independent, so I guess you
> are talking about Fdt16550SerialPortHookLib. I would say that the
> different is not in GetSerialConsolePortAddress, the logic about this
> function is same to ARM, the different is in
> PlatformHookSerialPortInitialize. Since some platform do not require
> running code on memory during the PEI phase, so the ARM version of
> PlatformHookSerialPortInitialize will use PcdSet to set a PCD value, if
> the memory is not ready, this funciton can not be used. So this library
> is override from ArmVirtPkg to LongArchVirt.
>
> BTW, the new library FdtSerialProtAddressLib which you committed a few
> days ago, I will look into it and try it. Roughly speaking, it is look
> like the code for obtaining the serial port address is sparated from the
> HookLIb. I have a question, can I move this library to OvmfPkg so that
> other ARCH can use it easily?
Yes, I think that's consistent with earlier code movements. Moving code
from ArmVirtPkg to OvmfPkg for improving (or enabling) code reuse is
valid, because ArmVirtPkg can continue consuming the same code from OvmfPkg.
>
> Regarding FdtSerialPortAddressLib, I would like to say that it was not
> committed when I porting LoongArchVirt, my code base is based on
> stable202308, so I don't know you committed a new library, sorry.
Sure, that sometimes happens when a new feature takes long (either to
implement, or to review).
Laszlo
>
>
>
> Thanks,
> Chao
> 在 2023/11/9 06:21, Laszlo Ersek 写道:
>> On 11/7/23 11:12, Chao Li wrote:
>>> Hi Gerd,
>>>
>>> These two libraries is not only copy code, the way of obtain the serial
>>> base address is different from ARM, and the early serial port output
>>> also different from ARM, so these two libraries are LoongArch specific.
>> I think we're going to have to go through the design with "baby steps".
>>
>> The commit message of the patch is empty.
>>
>> Please don't expect reviewers to "reverse engineer" the design from the
>> code. That's hugely taxing. It's hard enough to review code when we
>> precisey know in advance, from the commit message, what the code will
>> try to achieve.
>>
>> You are saying that the way to obtain serial base address is different
>> from ARM, yet the GetSerialConsolePortAddress() function looks very
>> similar to the function that I *replaced* in recent commits eb83b5330961
>> ("ArmVirtPkg: introduce FdtSerialPortAddressLib", 2023-10-26) and
>> f078a6fdd4d7 ("ArmVirtPkg/Fdt16550SerialPortHookLib: rebase to
>> FdtSerialPortAddressLib", 2023-10-26).
>>
>> So there are two issues with your GetSerialConsolePortAddress() function
>> immediately, I would say:
>>
>> - you say that it's different from ARM, but it seems to parse the DTB
>> identically (or mostly identically -- I'm speaking from memory),
>>
>> - I factored out the subject DTB parsing logic in the above-noted
>> commits recently, so even if your GetSerialConsolePortAddress() function
>> is *supposed* to parse the DTB identically to ARM, then the way to
>> employ that logic is different; it should be reused, not duplicated.
>>
>> Now that you have a running prototype (basically evidence that the port
>> to this new architecture can be done), can we go through the design of
>> each component (library, driver etc) one by one? Dumping the whole thing
>> on reviewers all at once, with little documentation, is not helpful. We
>> basically need to start with the specification of each of your modules.
>> See where the existing components in edk2 are not good enough or not
>> flexible enough, etc.
>>
>> Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111136): https://edk2.groups.io/g/devel/message/111136
Mute This Topic: https://groups.io/mt/102413885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 21/30] OvmfPkg/LoongArchVirt: Add real time clock library
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (19 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 20/30] OvmfPkg/LoongArchVirt: Add serial port library Chao Li
@ 2023-11-06 3:29 ` Chao Li
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 22/30] OvmfPkg/LoongArchVirt: Add NorFlashQemuLib Chao Li
` (11 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:29 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Baoqi Zhang, Xianglai Li
This library is provides real time clock for LoongArch virtual machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
---
.../DxeLsRealTimeClockLib.c | 333 ++++++++++++++++++
.../DxeLsRealTimeClockLib.inf | 42 +++
.../LsRealTimeClockLib/LsRealTimeClock.h | 47 +++
.../PeiLsRealTimeClockLib.c | 31 ++
.../PeiLsRealTimeClockLib.inf | 29 ++
5 files changed, 482 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/LsRealTimeClock.h
create mode 100644 OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.inf
diff --git a/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.c b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.c
new file mode 100644
index 0000000000..d634d30fd1
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.c
@@ -0,0 +1,333 @@
+/** @file
+ Implement EFI RealTimeClock runtime services via RTC Lib.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+#include <PiDxe.h>
+
+#include <Guid/EventGroup.h>
+#include <Guid/GlobalVariable.h>
+
+#include <Include/Base.h>
+#include <Library/BaseLib.h>
+#include <Library/HobLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/RealTimeClockLib.h>
+#include <Library/TimeBaseLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
+
+#include "LsRealTimeClock.h"
+
+STATIC BOOLEAN mInitialized = FALSE;
+STATIC EFI_EVENT mRtcVirtualAddrChangeEvent;
+STATIC UINTN mRtcBase;
+
+/*
+ Enable Real-time clock.
+
+ @param VOID
+
+ @retval VOID
+ */
+VOID
+InitRtc (
+ VOID
+ )
+{
+ UINTN Val;
+ EFI_HOB_GUID_TYPE *GuidHob = NULL;
+ VOID *DataInHob = NULL;
+
+ if (!mInitialized) {
+ /* Enable rtc */
+ GuidHob = GetFirstGuidHob (&mRtcRegisterBaseAddressGuid);
+ if (GuidHob) {
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ mRtcBase = (UINT64)(*(UINTN *)DataInHob);
+ Val = MmioRead32 (mRtcBase + RTC_CTRL_REG);
+ Val |= TOY_ENABLE_BIT | OSC_ENABLE_BIT;
+ MmioWrite32 (mRtcBase + RTC_CTRL_REG, Val);
+ mInitialized = TRUE;
+ } else {
+ DebugPrint (EFI_D_INFO, "RTC register address not found!\n");
+ ASSERT (FALSE);
+ }
+ }
+}
+
+/**
+ Returns the current time and date information, and the time-keeping capabilities
+ of the hardware platform.
+
+ @param Time A pointer to storage to receive a snapshot of the current time.
+ @param Capabilities An optional pointer to a buffer to receive the real time clock
+ device's capabilities.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER Time is NULL.
+ @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error.
+ @retval EFI_SECURITY_VIOLATION The time could not be retrieved due to an authentication failure.
+**/
+EFI_STATUS
+EFIAPI
+LibGetTime (
+ OUT EFI_TIME *Time,
+ OUT EFI_TIME_CAPABILITIES *Capabilities
+ )
+{
+ UINT32 Val;
+
+ // Ensure Time is a valid pointer
+ if (Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Val = MmioRead32 (mRtcBase + TOY_READ1_REG);
+ Time->Year = Val + 1900;
+
+ Val = MmioRead32 (mRtcBase + TOY_READ0_REG);
+ Time->Month = (Val >> TOY_MON_SHIFT) & TOY_MON_MASK;
+ Time->Day = (Val >> TOY_DAY_SHIFT) & TOY_DAY_MASK;
+ Time->Hour = (Val >> TOY_HOUR_SHIFT) & TOY_HOUR_MASK;
+ Time->Minute = (Val >> TOY_MIN_SHIFT) & TOY_MIN_MASK;
+ Time->Second = (Val >> TOY_SEC_SHIFT) & TOY_SEC_MASK;
+ Time->Nanosecond = 0;
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets the current local time and date information.
+
+ @param Time A pointer to the current time.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
+**/
+EFI_STATUS
+EFIAPI
+LibSetTime (
+ IN EFI_TIME *Time
+ )
+{
+ UINT32 Val;
+
+ // Initialize the hardware if not already done
+
+ Val = 0;
+ Val |= (Time->Second << TOY_SEC_SHIFT);
+ Val |= (Time->Minute << TOY_MIN_SHIFT);
+ Val |= (Time->Hour << TOY_HOUR_SHIFT);
+ Val |= (Time->Day << TOY_DAY_SHIFT);
+ Val |= (Time->Month << TOY_MON_SHIFT);
+ MmioWrite32 (mRtcBase + TOY_WRITE0_REG, Val);
+
+ Val = Time->Year - 1900;
+ MmioWrite32 (mRtcBase + TOY_WRITE1_REG, Val);
+ return EFI_SUCCESS;
+}
+
+/**
+ Returns the current wakeup alarm clock setting.
+
+ @param Enabled Indicates if the alarm is currently enabled or disabled.
+ @param Pending Indicates if the alarm signal is pending and requires acknowledgement.
+ @param Time The current alarm setting.
+
+ @retval EFI_SUCCESS The alarm settings were returned.
+ @retval EFI_INVALID_PARAMETER Any parameter is NULL.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error.
+**/
+EFI_STATUS
+EFIAPI
+LibGetWakeupTime (
+ OUT BOOLEAN *Enabled,
+ OUT BOOLEAN *Pending,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Sets the system wakeup alarm clock time.
+
+ @param Enabled Enable or disable the wakeup alarm.
+ @param Time If Enable is TRUE, the time to set the wakeup alarm for.
+
+ @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
+ Enable is FALSE, then the wakeup alarm was disabled.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
+ @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
+**/
+EFI_STATUS
+EFIAPI
+LibSetWakeupTime (
+ IN BOOLEAN Enabled,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Fixup internal data so that EFI can be call in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+VirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ //
+ // Only needed if you are going to support the OS calling RTC functions in virtual mode.
+ // You will need to call EfiConvertPointer (). To convert any stored physical addresses
+ // to virtual address. After the OS transitions to calling in virtual mode, all future
+ // runtime calls will be made in virtual mode.
+ //
+ EfiConvertPointer (0x0, (VOID **)&mRtcBase);
+ return;
+}
+
+/** Add the RTC controller address range to the memory map.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] RtcPageBase Base address of the RTC controller.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+KvmtoolRtcMapMemory (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_PHYSICAL_ADDRESS RtcPageBase
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gDS->AddMemorySpace (
+ EfiGcdMemoryTypeMemoryMappedIo,
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to add memory space. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ Status = gDS->AllocateMemorySpace (
+ EfiGcdAllocateAddress,
+ EfiGcdMemoryTypeMemoryMappedIo,
+ 0,
+ EFI_PAGE_SIZE,
+ &RtcPageBase,
+ ImageHandle,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to allocate memory space. Status = %r\n",
+ Status
+ ));
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to set memory attributes. Status = %r\n",
+ Status
+ ));
+
+ gDS->FreeMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ }
+
+ return Status;
+}
+
+/**
+ This is the declaration of an EFI image entry point. This can be the entry point to an application
+ written to this specification, an EFI boot service driver, or an EFI runtime driver.
+
+ @param ImageHandle Handle that identifies the loaded image.
+ @param SystemTable System Table for this image.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+**/
+EFI_STATUS
+EFIAPI
+LibRtcInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ InitRtc ();
+ Status = KvmtoolRtcMapMemory (ImageHandle, (mRtcBase & ~EFI_PAGE_MASK));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to map memory for loongson 7A RTC. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ //
+ // Register for the virtual address change event
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ VirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mRtcVirtualAddrChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.inf b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.inf
new file mode 100644
index 0000000000..3b8a21b25c
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.inf
@@ -0,0 +1,42 @@
+## @file
+# LoongArch64 CPU Real Time Clock DXE Phase Library.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = LsRealTimeClockLib
+ FILE_GUID = 9793a3da-1869-4fdf-88b1-c6484341f50b
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = RealTimeClockLib
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources.common]
+ DxeLsRealTimeClockLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+
+[LibraryClasses]
+ IoLib
+ UefiLib
+ DebugLib
+ PcdLib
+ HobLib
+ DxeServicesTableLib
+ UefiRuntimeLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
+
+[Depex]
+ TRUE
diff --git a/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/LsRealTimeClock.h b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/LsRealTimeClock.h
new file mode 100644
index 0000000000..fc8663da56
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/LsRealTimeClock.h
@@ -0,0 +1,47 @@
+/** @file
+ Implement EFI RealTimeClock runtime services via RTC Lib.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef LS_REAL_TIME_CLOCK_H_
+#define LS_REAL_TIME_CLOCK_H_
+
+#define TOY_WRITE0_REG 0x24
+#define TOY_WRITE1_REG 0x28
+#define TOY_READ0_REG 0x2c
+#define TOY_READ1_REG 0x30
+#define RTC_CTRL_REG 0x40
+
+/* TOY Enable bits */
+#define RTC_ENABLE_BIT (1UL << 13)
+#define TOY_ENABLE_BIT (1UL << 11)
+#define OSC_ENABLE_BIT (1UL << 8)
+
+/*
+ * shift bits and filed mask
+ */
+#define TOY_MON_MASK 0x3f
+#define TOY_DAY_MASK 0x1f
+#define TOY_HOUR_MASK 0x1f
+#define TOY_MIN_MASK 0x3f
+#define TOY_SEC_MASK 0x3f
+#define TOY_MSEC_MASK 0xf
+
+#define TOY_MON_SHIFT 26
+#define TOY_DAY_SHIFT 21
+#define TOY_HOUR_SHIFT 16
+#define TOY_MIN_SHIFT 10
+#define TOY_SEC_SHIFT 4
+
+#define RTC_REGISTER_ADDRESS_HOB_GUID \
+ { \
+ 0x0d7c012b, 0x79c1, 0xfa58, { 0x6f, 0x91, 0xbe, 0x3e, 0xee, 0x46, 0x5f, 0x71 } \
+ }
+
+EFI_GUID mRtcRegisterBaseAddressGuid = RTC_REGISTER_ADDRESS_HOB_GUID;
+
+#endif // LS_REAL_TIME_CLOCK_H_
diff --git a/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.c b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.c
new file mode 100644
index 0000000000..d6f71f66ad
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.c
@@ -0,0 +1,31 @@
+/** @file
+ Implement EFI RealTimeClock PEI phase RTC Lib.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/HobLib.h>
+
+#include "LsRealTimeClock.h"
+
+VOID
+SaveRtcRegisterAddressHob (
+ UINT64 RtcRegisterBase
+ )
+{
+ UINT64 Data64;
+
+ //
+ // Build location of RTC register base address buffer in HOB
+ //
+ Data64 = (UINT64)(UINTN)RtcRegisterBase;
+
+ BuildGuidDataHob (
+ &mRtcRegisterBaseAddressGuid,
+ (VOID *)&Data64,
+ sizeof (UINT64)
+ );
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.inf b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.inf
new file mode 100644
index 0000000000..8b78040331
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.inf
@@ -0,0 +1,29 @@
+## @file
+# LoongArch64 CPU Real Time Clock PEI Phase Library.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiLsRealTimeClockLib
+ FILE_GUID = d4358430-15ec-9358-1b12-26dab955e9c6
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = RealTimeClockLib|PEIM
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources.common]
+ PeiLsRealTimeClockLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ HobLib
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110725): https://edk2.groups.io/g/devel/message/110725
Mute This Topic: https://groups.io/mt/102413887/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 22/30] OvmfPkg/LoongArchVirt: Add NorFlashQemuLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (20 preceding siblings ...)
2023-11-06 3:29 ` [edk2-devel] [PATCH v2 21/30] OvmfPkg/LoongArchVirt: Add real time clock library Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib Chao Li
` (10 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Add NorFlashQemuLib for LoongArch, it is referenced from ArmVirtPkg.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../Library/NorFlashQemuLib/NorFlashQemuLib.c | 140 ++++++++++++++++++
.../NorFlashQemuLib/NorFlashQemuLib.inf | 43 ++++++
2 files changed, 183 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.inf
diff --git a/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.c b/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.c
new file mode 100644
index 0000000000..578735a7c6
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.c
@@ -0,0 +1,140 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/VirtNorFlashPlatformLib.h>
+
+#include <Protocol/FdtClient.h>
+
+#define QEMU_NOR_BLOCK_SIZE SIZE_128KB
+
+EFI_STATUS
+VirtNorFlashPlatformInitialization (
+ VOID
+ )
+{
+ return EFI_SUCCESS;
+}
+
+STATIC VIRT_NOR_FLASH_DESCRIPTION mNorFlashDevices;
+
+EFI_STATUS
+VirtNorFlashPlatformGetDevices (
+ OUT VIRT_NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
+ )
+{
+ FDT_CLIENT_PROTOCOL *FdtClient;
+ INT32 Node;
+ EFI_STATUS Status;
+ EFI_STATUS FindNodeStatus;
+ CONST UINT32 *Reg;
+ UINT32 PropSize;
+ UINT64 Base;
+ UINT64 Size;
+
+ Status = gBS->LocateProtocol (
+ &gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&FdtClient
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ FindNodeStatus = FdtClient->FindCompatibleNode (
+ FdtClient,
+ "cfi-flash",
+ &Node
+ );
+ ASSERT_EFI_ERROR (FindNodeStatus);
+
+ Status = FdtClient->GetNodeProperty (
+ FdtClient,
+ Node,
+ "reg",
+ (CONST VOID **)&Reg,
+ &PropSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: GetNodeProperty () failed (Status == %r)\n",
+ __FUNCTION__,
+ Status
+ ));
+ return Status;
+ }
+
+ ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
+
+ if (PropSize < (4 * sizeof (UINT32))) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: reg node size(%d) is too small \n",
+ __FUNCTION__,
+ PropSize
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
+ Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
+
+ mNorFlashDevices.DeviceBaseAddress = (UINTN)Base;
+ mNorFlashDevices.RegionBaseAddress = (UINTN)Base;
+ mNorFlashDevices.Size = (UINTN)Size;
+ mNorFlashDevices.BlockSize = QEMU_NOR_BLOCK_SIZE;
+
+ Status = PcdSet32S (PcdFlashNvStorageVariableBase, Base);
+ ASSERT_EFI_ERROR (Status);
+
+ /*
+ * Base is the value of PcdFlashNvStorageVariableBase,
+ * PcdFlashNvStorageFtwWorkingBase can be got by
+ * PcdFlashNvStorageVariableBase + PcdFlashNvStorageVariableSize
+ */
+ Base += PcdGet32 (PcdFlashNvStorageVariableSize);
+ Status = PcdSet32S (PcdFlashNvStorageFtwWorkingBase, Base);
+ ASSERT_EFI_ERROR (Status);
+
+ /*
+ * Now,Base is the value of PcdFlashNvStorageFtwWorkingBase,
+ * PcdFlashNvStorageFtwSpareBase can be got by
+ * PcdFlashNvStorageFtwWorkingBase + PcdFlashNvStorageFtwWorkingSize.
+ */
+ Base += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+ Status = PcdSet32S (PcdFlashNvStorageFtwSpareBase, Base);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // UEFI takes ownership of the NOR flash, and exposes its functionality
+ // through the UEFI Runtime Services GetVariable, SetVariable, etc. This
+ // means we need to disable it in the device tree to prevent the OS from
+ // attaching its device driver as well.
+ // Note that this also hides other flash banks, but the only other flash
+ // bank we expect to encounter is the one that carries the UEFI executable
+ // code, which is not intended to be guest updatable, and is usually backed
+ // in a readonly manner by QEMU anyway.
+ //
+ Status = FdtClient->SetNodeProperty (
+ FdtClient,
+ Node,
+ "status",
+ "disabled",
+ sizeof ("disabled")
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_WARN, "Failed to set NOR flash status to 'disabled'\n"));
+ }
+
+ *NorFlashDescriptions = &mNorFlashDevices;
+ *Count = 1;
+
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.inf
new file mode 100644
index 0000000000..0d3d34e686
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.inf
@@ -0,0 +1,43 @@
+## @file
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = NorFlashQemuLib
+ FILE_GUID = E225C90F-6CB9-8AF3-095B-2668FC633A57
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = VirtNorFlashPlatformLib
+
+[Sources.common]
+ NorFlashQemuLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ OvmfPkg/OvmfPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Depex]
+ gFdtClientProtocolGuid
+
+[Pcd]
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110726): https://edk2.groups.io/g/devel/message/110726
Mute This Topic: https://groups.io/mt/102413900/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (21 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 22/30] OvmfPkg/LoongArchVirt: Add NorFlashQemuLib Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-08 22:22 ` Laszlo Ersek
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library Chao Li
` (9 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Use a register to save PeiServiceTable pointer. This Library provides
PeiServiceTable pointer saveing and retrieval serivces.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../PeiServicesTablePointer.c | 75 +++++++++++++++++++
.../PeiServicesTablePointerLib.inf | 31 ++++++++
2 files changed, 106 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
new file mode 100644
index 0000000000..dcbcb50131
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
@@ -0,0 +1,75 @@
+/** @file
+ PEI Services Table Pointer Library.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiPei.h>
+#include <Library/PeiServicesTablePointerLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+/**
+ Caches a pointer PEI Services Table.
+
+ Caches the pointer to the PEI Services Table specified by PeiServicesTablePointer
+ in a platform specific manner.
+
+ If PeiServicesTablePointer is NULL, then ASSERT ().
+
+ @param PeiServicesTablePointer The address of PeiServices pointer.
+**/
+VOID
+EFIAPI
+SetPeiServicesTablePointer (
+ IN CONST EFI_PEI_SERVICES **PeiServicesTablePointer
+ )
+{
+ CsrWrite (LOONGARCH_CSR_KS0, (UINTN)PeiServicesTablePointer);
+}
+
+/**
+ Retrieves the cached value of the PEI Services Table pointer.
+
+ Returns the cached value of the PEI Services Table pointer in a CPU specific manner
+ as specified in the CPU binding section of the Platform Initialization Pre-EFI
+ Initialization Core Interface Specification.
+
+ If the cached PEI Services Table pointer is NULL, then ASSERT ().
+
+ @return The pointer to PeiServices.
+**/
+CONST EFI_PEI_SERVICES **
+EFIAPI
+GetPeiServicesTablePointer (
+ VOID
+ )
+{
+ return (CONST EFI_PEI_SERVICES **)(CsrRead (LOONGARCH_CSR_KS0));
+}
+
+/**
+Perform CPU specific actions required to migrate the PEI Services Table
+pointer from temporary RAM to permanent RAM.
+
+For IA32 CPUs, the PEI Services Table pointer is stored in the 4 bytes
+immediately preceding the Interrupt Descriptor Table (IDT) in memory.
+For X64 CPUs, the PEI Services Table pointer is stored in the 8 bytes
+immediately preceding the Interrupt Descriptor Table (IDT) in memory.
+For Itanium and ARM CPUs, a the PEI Services Table Pointer is stored in
+a dedicated CPU register. This means that there is no memory storage
+associated with storing the PEI Services Table pointer, so no additional
+migration actions are required for Itanium or ARM CPUs.
+**/
+VOID
+EFIAPI
+MigratePeiServicesTablePointer (
+ VOID
+ )
+{
+ return;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
new file mode 100644
index 0000000000..274cb2f781
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
@@ -0,0 +1,31 @@
+## @file
+# PEI Services Table Pointer Library.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiServicesTablePointerLib
+ FILE_GUID = 098B0DB0-AD01-8886-D409-90CBC7E89154
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PeiServicesTablePointerLib|PEIM PEI_CORE SEC
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ PeiServicesTablePointer.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+
+[Pcd]
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110727): https://edk2.groups.io/g/devel/message/110727
Mute This Topic: https://groups.io/mt/102413901/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib Chao Li
@ 2023-11-08 22:22 ` Laszlo Ersek
2023-11-10 6:44 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-08 22:22 UTC (permalink / raw)
To: devel, lichao
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
On 11/6/23 04:30, Chao Li wrote:
> Use a register to save PeiServiceTable pointer. This Library provides
> PeiServiceTable pointer saveing and retrieval serivces.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
> Co-authored-by: Bibo Mao <maobibo@loongson.cn>
> ---
> .../PeiServicesTablePointer.c | 75 +++++++++++++++++++
> .../PeiServicesTablePointerLib.inf | 31 ++++++++
> 2 files changed, 106 insertions(+)
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
Why is this under OvmfPkg?
Laszlo
>
> diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
> new file mode 100644
> index 0000000000..dcbcb50131
> --- /dev/null
> +++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
> @@ -0,0 +1,75 @@
> +/** @file
> + PEI Services Table Pointer Library.
> +
> + Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <PiPei.h>
> +#include <Library/PeiServicesTablePointerLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/BaseLib.h>
> +#include <Register/LoongArch64/Csr.h>
> +
> +/**
> + Caches a pointer PEI Services Table.
> +
> + Caches the pointer to the PEI Services Table specified by PeiServicesTablePointer
> + in a platform specific manner.
> +
> + If PeiServicesTablePointer is NULL, then ASSERT ().
> +
> + @param PeiServicesTablePointer The address of PeiServices pointer.
> +**/
> +VOID
> +EFIAPI
> +SetPeiServicesTablePointer (
> + IN CONST EFI_PEI_SERVICES **PeiServicesTablePointer
> + )
> +{
> + CsrWrite (LOONGARCH_CSR_KS0, (UINTN)PeiServicesTablePointer);
> +}
> +
> +/**
> + Retrieves the cached value of the PEI Services Table pointer.
> +
> + Returns the cached value of the PEI Services Table pointer in a CPU specific manner
> + as specified in the CPU binding section of the Platform Initialization Pre-EFI
> + Initialization Core Interface Specification.
> +
> + If the cached PEI Services Table pointer is NULL, then ASSERT ().
> +
> + @return The pointer to PeiServices.
> +**/
> +CONST EFI_PEI_SERVICES **
> +EFIAPI
> +GetPeiServicesTablePointer (
> + VOID
> + )
> +{
> + return (CONST EFI_PEI_SERVICES **)(CsrRead (LOONGARCH_CSR_KS0));
> +}
> +
> +/**
> +Perform CPU specific actions required to migrate the PEI Services Table
> +pointer from temporary RAM to permanent RAM.
> +
> +For IA32 CPUs, the PEI Services Table pointer is stored in the 4 bytes
> +immediately preceding the Interrupt Descriptor Table (IDT) in memory.
> +For X64 CPUs, the PEI Services Table pointer is stored in the 8 bytes
> +immediately preceding the Interrupt Descriptor Table (IDT) in memory.
> +For Itanium and ARM CPUs, a the PEI Services Table Pointer is stored in
> +a dedicated CPU register. This means that there is no memory storage
> +associated with storing the PEI Services Table pointer, so no additional
> +migration actions are required for Itanium or ARM CPUs.
> +**/
> +VOID
> +EFIAPI
> +MigratePeiServicesTablePointer (
> + VOID
> + )
> +{
> + return;
> +}
> diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
> new file mode 100644
> index 0000000000..274cb2f781
> --- /dev/null
> +++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
> @@ -0,0 +1,31 @@
> +## @file
> +# PEI Services Table Pointer Library.
> +#
> +# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = PeiServicesTablePointerLib
> + FILE_GUID = 098B0DB0-AD01-8886-D409-90CBC7E89154
> + MODULE_TYPE = PEIM
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = PeiServicesTablePointerLib|PEIM PEI_CORE SEC
> +
> +#
> +# VALID_ARCHITECTURES = LOONGARCH64
> +#
> +
> +[Sources]
> + PeiServicesTablePointer.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> +
> +[Pcd]
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110932): https://edk2.groups.io/g/devel/message/110932
Mute This Topic: https://groups.io/mt/102413901/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib
2023-11-08 22:22 ` Laszlo Ersek
@ 2023-11-10 6:44 ` Chao Li
2023-11-13 11:02 ` Laszlo Ersek
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-10 6:44 UTC (permalink / raw)
To: Laszlo Ersek, devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 6093 bytes --]
Hi Laszlo,
This is a good question, same as the previous email, some ARCH don't
require running code on memory during PEI phase or other reason can not
used the MdePkg version, so this pointer will be saved by some register,
I saw the ArmPkg version also uses a register to save this pointer.
If I move ArmPkg version PeiServiceTablePointer to MdePkg and the method
of getting and saving the pointer use a new library which related
architecture, other word, the API of PeiServiceTablePointer has not
changed, adding a new library that PeiServiceTablePointer depends on,
the real saving and reading method completed in the new library. Do you
think this way is better?
Thanks,
Chao
在 2023/11/9 06:22, Laszlo Ersek 写道:
> On 11/6/23 04:30, Chao Li wrote:
>> Use a register to save PeiServiceTable pointer. This Library provides
>> PeiServiceTable pointer saveing and retrieval serivces.
>>
>> BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>>
>> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
>> Cc: Jiewen Yao<jiewen.yao@intel.com>
>> Cc: Jordan Justen<jordan.l.justen@intel.com>
>> Cc: Gerd Hoffmann<kraxel@redhat.com>
>> Signed-off-by: Chao Li<lichao@loongson.cn>
>> Co-authored-by: Xianglai Li<lixianglai@loongson.cn>
>> Co-authored-by: Bibo Mao<maobibo@loongson.cn>
>> ---
>> .../PeiServicesTablePointer.c | 75 +++++++++++++++++++
>> .../PeiServicesTablePointerLib.inf | 31 ++++++++
>> 2 files changed, 106 insertions(+)
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
> Why is this under OvmfPkg?
>
> Laszlo
>
>> diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
>> new file mode 100644
>> index 0000000000..dcbcb50131
>> --- /dev/null
>> +++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointer.c
>> @@ -0,0 +1,75 @@
>> +/** @file
>> + PEI Services Table Pointer Library.
>> +
>> + Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
>> +
>> + SPDX-License-Identifier: BSD-2-Clause-Patent
>> +
>> +**/
>> +
>> +#include <PiPei.h>
>> +#include <Library/PeiServicesTablePointerLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/BaseLib.h>
>> +#include <Register/LoongArch64/Csr.h>
>> +
>> +/**
>> + Caches a pointer PEI Services Table.
>> +
>> + Caches the pointer to the PEI Services Table specified by PeiServicesTablePointer
>> + in a platform specific manner.
>> +
>> + If PeiServicesTablePointer is NULL, then ASSERT ().
>> +
>> + @param PeiServicesTablePointer The address of PeiServices pointer.
>> +**/
>> +VOID
>> +EFIAPI
>> +SetPeiServicesTablePointer (
>> + IN CONST EFI_PEI_SERVICES **PeiServicesTablePointer
>> + )
>> +{
>> + CsrWrite (LOONGARCH_CSR_KS0, (UINTN)PeiServicesTablePointer);
>> +}
>> +
>> +/**
>> + Retrieves the cached value of the PEI Services Table pointer.
>> +
>> + Returns the cached value of the PEI Services Table pointer in a CPU specific manner
>> + as specified in the CPU binding section of the Platform Initialization Pre-EFI
>> + Initialization Core Interface Specification.
>> +
>> + If the cached PEI Services Table pointer is NULL, then ASSERT ().
>> +
>> + @return The pointer to PeiServices.
>> +**/
>> +CONST EFI_PEI_SERVICES **
>> +EFIAPI
>> +GetPeiServicesTablePointer (
>> + VOID
>> + )
>> +{
>> + return (CONST EFI_PEI_SERVICES **)(CsrRead (LOONGARCH_CSR_KS0));
>> +}
>> +
>> +/**
>> +Perform CPU specific actions required to migrate the PEI Services Table
>> +pointer from temporary RAM to permanent RAM.
>> +
>> +For IA32 CPUs, the PEI Services Table pointer is stored in the 4 bytes
>> +immediately preceding the Interrupt Descriptor Table (IDT) in memory.
>> +For X64 CPUs, the PEI Services Table pointer is stored in the 8 bytes
>> +immediately preceding the Interrupt Descriptor Table (IDT) in memory.
>> +For Itanium and ARM CPUs, a the PEI Services Table Pointer is stored in
>> +a dedicated CPU register. This means that there is no memory storage
>> +associated with storing the PEI Services Table pointer, so no additional
>> +migration actions are required for Itanium or ARM CPUs.
>> +**/
>> +VOID
>> +EFIAPI
>> +MigratePeiServicesTablePointer (
>> + VOID
>> + )
>> +{
>> + return;
>> +}
>> diff --git a/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
>> new file mode 100644
>> index 0000000000..274cb2f781
>> --- /dev/null
>> +++ b/OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
>> @@ -0,0 +1,31 @@
>> +## @file
>> +# PEI Services Table Pointer Library.
>> +#
>> +# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
>> +#
>> +# SPDX-License-Identifier: BSD-2-Clause-Patent
>> +#
>> +##
>> +[Defines]
>> + INF_VERSION = 0x00010005
>> + BASE_NAME = PeiServicesTablePointerLib
>> + FILE_GUID = 098B0DB0-AD01-8886-D409-90CBC7E89154
>> + MODULE_TYPE = PEIM
>> + VERSION_STRING = 1.0
>> + LIBRARY_CLASS = PeiServicesTablePointerLib|PEIM PEI_CORE SEC
>> +
>> +#
>> +# VALID_ARCHITECTURES = LOONGARCH64
>> +#
>> +
>> +[Sources]
>> + PeiServicesTablePointer.c
>> +
>> +[Packages]
>> + MdePkg/MdePkg.dec
>> +
>> +[LibraryClasses]
>> + BaseLib
>> + DebugLib
>> +
>> +[Pcd]
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111020): https://edk2.groups.io/g/devel/message/111020
Mute This Topic: https://groups.io/mt/102413901/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 7810 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib
2023-11-10 6:44 ` Chao Li
@ 2023-11-13 11:02 ` Laszlo Ersek
2023-11-14 2:08 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-13 11:02 UTC (permalink / raw)
To: Chao Li, devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
On 11/10/23 07:44, Chao Li wrote:
> Hi Laszlo,
>
> This is a good question, same as the previous email, some ARCH don't
> require running code on memory during PEI phase or other reason can not
> used the MdePkg version, so this pointer will be saved by some register,
> I saw the ArmPkg version also uses a register to save this pointer.
>
> If I move ArmPkg version PeiServiceTablePointer to MdePkg and the method
> of getting and saving the pointer use a new library which related
> architecture, other word, the API of PeiServiceTablePointer has not
> changed, adding a new library that PeiServiceTablePointer depends on,
> the real saving and reading method completed in the new library. Do you
> think this way is better?
Right. I think you need a loongarch-specific library instance of
PeiServicesTablePointerLib under MdePkg. Presumably, if / when you
enable edk2 on *physical* loongarch platforms, you're going to need the
same library instance. And therefore it should not be under OvmfPkg, but
MdePkg.
In fact, now that I'm reading the comments in
"MdePkg/Library/PeiServicesTablePointerLibIdt/PeiServicesTablePointer.c",
it seems that the architecture bindings in the Platform Init
specification actually document how the PEI services table pointer is
supposed to be stored before system memory becomes available (IIUC).
The latest version of the PI spec that I have is 1.8.
In Volume I, there is a section titled "I-9.4 PEI Services Table
Retrieval". It considers the following architectures: X86, x64, Itanium,
ARM, AArch64, RISC-V.
I think that in the longer term, you should file a PIWG Mantis ticket
for extending this section, with an Engineering Change Request where you
describe how this mechanism should work on loongarch.
And then the implementation certainly belongs to MdePkg.
(Note that I'm *not* saying you should first update the specification
and then implement it in edk2 -- that's not my point. My point is that
*eventually*, this mechanism will become a part of the public loongarch
bindings, and therefore you can already start introducing it under
MdePkg, in my opinion anyway.)
Note that "prior art" is inconsistent here, regarding edk2 locations,
because, as you say, the arm/aarch64 implementation lives under ArmPkg
-- but it's quite unlikely IMO that a LoongArchPkg top-level directory
would be introduced. In the longer term, we might want to consolidate
all PeiServicesTablePointerLib instances under MdePkg.
Then your question is, IIUC, whether to reuse any portion of the ArmPkg
implementation. I don't think that's necessary; the library is so small,
there is effectively *nothing generic* in it. Put differently, all of it
is architecture specific. Thus I think you can just add a totally
self-contained loongarch instance.
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111139): https://edk2.groups.io/g/devel/message/111139
Mute This Topic: https://groups.io/mt/102413901/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib
2023-11-13 11:02 ` Laszlo Ersek
@ 2023-11-14 2:08 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-14 2:08 UTC (permalink / raw)
To: devel, lersek
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 3502 bytes --]
Hi Laszlo,
I see, I will look into this PI SPEC and try to implement it in MdePkg
first and then to update the SPEC.
Thanks,
Chao
On 2023/11/13 19:02, Laszlo Ersek wrote:
> On 11/10/23 07:44, Chao Li wrote:
>> Hi Laszlo,
>>
>> This is a good question, same as the previous email, some ARCH don't
>> require running code on memory during PEI phase or other reason can not
>> used the MdePkg version, so this pointer will be saved by some register,
>> I saw the ArmPkg version also uses a register to save this pointer.
>>
>> If I move ArmPkg version PeiServiceTablePointer to MdePkg and the method
>> of getting and saving the pointer use a new library which related
>> architecture, other word, the API of PeiServiceTablePointer has not
>> changed, adding a new library that PeiServiceTablePointer depends on,
>> the real saving and reading method completed in the new library. Do you
>> think this way is better?
> Right. I think you need a loongarch-specific library instance of
> PeiServicesTablePointerLib under MdePkg. Presumably, if / when you
> enable edk2 on *physical* loongarch platforms, you're going to need the
> same library instance. And therefore it should not be under OvmfPkg, but
> MdePkg.
>
> In fact, now that I'm reading the comments in
> "MdePkg/Library/PeiServicesTablePointerLibIdt/PeiServicesTablePointer.c",
> it seems that the architecture bindings in the Platform Init
> specification actually document how the PEI services table pointer is
> supposed to be stored before system memory becomes available (IIUC).
>
> The latest version of the PI spec that I have is 1.8.
>
> In Volume I, there is a section titled "I-9.4 PEI Services Table
> Retrieval". It considers the following architectures: X86, x64, Itanium,
> ARM, AArch64, RISC-V.
>
> I think that in the longer term, you should file a PIWG Mantis ticket
> for extending this section, with an Engineering Change Request where you
> describe how this mechanism should work on loongarch.
>
> And then the implementation certainly belongs to MdePkg.
>
> (Note that I'm *not* saying you should first update the specification
> and then implement it in edk2 -- that's not my point. My point is that
> *eventually*, this mechanism will become a part of the public loongarch
> bindings, and therefore you can already start introducing it under
> MdePkg, in my opinion anyway.)
>
> Note that "prior art" is inconsistent here, regarding edk2 locations,
> because, as you say, the arm/aarch64 implementation lives under ArmPkg
> -- but it's quite unlikely IMO that a LoongArchPkg top-level directory
> would be introduced. In the longer term, we might want to consolidate
> all PeiServicesTablePointerLib instances under MdePkg.
>
>
> Then your question is, IIUC, whether to reuse any portion of the ArmPkg
> implementation. I don't think that's necessary; the library is so small,
> there is effectively *nothing generic* in it. Put differently, all of it
> is architecture specific. Thus I think you can just add a totally
> self-contained loongarch instance.
>
> Laszlo
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111189): https://edk2.groups.io/g/devel/message/111189
Mute This Topic: https://groups.io/mt/102413901/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 4677 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (22 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 23/30] OvmfPkg/LoongArchVirt: Add PeiServiceTablePointerLib Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-08 22:24 ` Laszlo Ersek
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 25/30] OvmfPkg/LoongArchVirt: Add FdtQemuFwCfgLib Chao Li
` (8 subsequent siblings)
32 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
This library is provides boot mananger interfaces, and it is referenced
from ArmVirtPkg.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../PlatformBootManagerLib/PlatformBm.c | 829 ++++++++++++++++++
.../PlatformBootManagerLib/PlatformBm.h | 112 +++
.../PlatformBootManagerLib.inf | 73 ++
.../PlatformBootManagerLib/QemuKernel.c | 81 ++
4 files changed, 1095 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h
create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c
diff --git a/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c
new file mode 100644
index 0000000000..bc12eaa108
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c
@@ -0,0 +1,829 @@
+/** @file
+ Implementation for PlatformBootManagerLib library class interfaces.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <IndustryStandard/Pci22.h>
+#include <Library/BootLogoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/QemuBootOrderLib.h>
+#include <Library/UefiBootManagerLib.h>
+#include <Protocol/FirmwareVolume2.h>
+#include <Protocol/LoadedImage.h>
+#include <Protocol/PciIo.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseMemoryLib.h>
+#include "PlatformBm.h"
+
+STATIC PLATFORM_SERIAL_CONSOLE mSerialConsole = {
+ //
+ // VENDOR_DEVICE_PATH SerialDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ SERIAL_DXE_FILE_GUID
+ },
+
+ //
+ // UART_DEVICE_PATH Uart
+ //
+ {
+ { MESSAGING_DEVICE_PATH, MSG_UART_DP, DP_NODE_LEN (UART_DEVICE_PATH) },
+ 0, // Reserved
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
+ },
+
+ //
+ // VENDOR_DEFINED_DEVICE_PATH TermType
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_VENDOR_DP,
+ DP_NODE_LEN (VENDOR_DEFINED_DEVICE_PATH)
+ }
+ //
+ // Guid to be filled in dynamically
+ //
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+STATIC PLATFORM_USB_KEYBOARD mUsbKeyboard = {
+ //
+ // USB_CLASS_DEVICE_PATH Keyboard
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_USB_CLASS_DP,
+ DP_NODE_LEN (USB_CLASS_DEVICE_PATH)
+ },
+ 0xFFFF, // VendorId: any
+ 0xFFFF, // ProductId: any
+ 3, // DeviceClass: HID
+ 1, // DeviceSubClass: boot
+ 1 // DeviceProtocol: keyboard
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+/**
+ Locate all handles that carry the specified protocol, filter them with a
+ callback function, and pass each handle that passes the filter to another
+ callback.
+
+ @param[in] ProtocolGuid The protocol to look for.
+
+ @param[in] Filter The filter function to pass each handle to. If this
+ parameter is NULL, then all handles are processed.
+
+ @param[in] Process The callback function to pass each handle to that
+ clears the filter.
+**/
+VOID
+FilterAndProcess (
+ IN EFI_GUID *ProtocolGuid,
+ IN FILTER_FUNCTION Filter OPTIONAL,
+ IN CALLBACK_FUNCTION Process
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE *Handles;
+ UINTN NoHandles;
+ UINTN Idx;
+
+ Status = gBS->LocateHandleBuffer (
+ ByProtocol,
+ ProtocolGuid,
+ NULL /* SearchKey */,
+ &NoHandles,
+ &Handles
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // This is not an error, just an informative condition.
+ //
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: %g: %r\n",
+ __FUNCTION__,
+ ProtocolGuid,
+ Status
+ ));
+ return;
+ }
+
+ ASSERT (NoHandles > 0);
+ for (Idx = 0; Idx < NoHandles; ++Idx) {
+ CHAR16 *DevicePathText;
+ STATIC CHAR16 Fallback[] = L"<device path unavailable>";
+
+ //
+ // The ConvertDevicePathToText () function handles NULL input transparently.
+ //
+ DevicePathText = ConvertDevicePathToText (
+ DevicePathFromHandle (Handles[Idx]),
+ FALSE, // DisplayOnly
+ FALSE // AllowShortcuts
+ );
+ if (DevicePathText == NULL) {
+ DevicePathText = Fallback;
+ }
+
+ if ((Filter == NULL) || (Filter (Handles[Idx], DevicePathText))) {
+ Process (Handles[Idx], DevicePathText);
+ }
+
+ if (DevicePathText != Fallback) {
+ FreePool (DevicePathText);
+ }
+ }
+
+ gBS->FreePool (Handles);
+}
+
+/**
+ This FILTER_FUNCTION checks if a handle corresponds to a PCI display device.
+
+ @param Handle The handle to check
+ @param ReportText A pointer to a string at the time of the error.
+
+ @retval TURE THe handle corresponds to a PCI display device.
+ @retval FALSE THe handle does not corresponds to a PCI display device.
+**/
+BOOLEAN
+EFIAPI
+IsPciDisplay (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 Pci;
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiPciIoProtocolGuid,
+ (VOID **)&PciIo
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // This is not an error worth reporting.
+ //
+ return FALSE;
+ }
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ 0 /* Offset */,
+ sizeof Pci / sizeof (UINT32),
+ &Pci
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %s: %r\n", __FUNCTION__, ReportText, Status));
+ return FALSE;
+ }
+
+ return IS_PCI_DISPLAY (&Pci);
+}
+
+/**
+ This CALLBACK_FUNCTION attempts to connect a handle non-recursively, asking
+ the matching driver to produce all first-level child handles.
+
+ @param Handle The handle to connect.
+ @param ReportText A pointer to a string at the time of the error.
+
+ @retval VOID
+**/
+VOID
+EFIAPI
+Connect (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->ConnectController (
+ Handle, // ControllerHandle
+ NULL, // DriverImageHandle
+ NULL, // RemainingDevicePath -- produce all children
+ FALSE // Recursive
+ );
+ DEBUG ((
+ EFI_ERROR (Status) ? DEBUG_ERROR : DEBUG_VERBOSE,
+ "%a: %s: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+}
+
+/**
+ This CALLBACK_FUNCTION retrieves the EFI_DEVICE_PATH_PROTOCOL from the
+ handle, and adds it to ConOut and ErrOut.
+
+ @param Handle The handle to retrieves.
+ @param ReportText A pointer to a string at the time of the error.
+
+ @retval VOID
+**/
+VOID
+EFIAPI
+AddOutput (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ DevicePath = DevicePathFromHandle (Handle);
+ if (DevicePath == NULL) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: handle %p: device path not found\n",
+ __FUNCTION__,
+ ReportText,
+ Handle
+ ));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ConOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: adding to ConOut: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ErrOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: adding to ErrOut: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+ return;
+ }
+
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: %s: added to ConOut and ErrOut\n",
+ __FUNCTION__,
+ ReportText
+ ));
+}
+
+/**
+ Register the boot option.
+
+ @param FileGuid File Guid.
+ @param Description Option descriptor.
+ @param Attributes Option Attributes.
+
+ @retval VOID
+**/
+VOID
+PlatformRegisterFvBootOption (
+ IN EFI_GUID *FileGuid,
+ IN CHAR16 *Description,
+ IN UINT32 Attributes
+ )
+{
+ EFI_STATUS Status;
+ INTN OptionIndex;
+ EFI_BOOT_MANAGER_LOAD_OPTION NewOption;
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN BootOptionCount;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FileNode;
+ EFI_LOADED_IMAGE_PROTOCOL *LoadedImage;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ Status = gBS->HandleProtocol (
+ gImageHandle,
+ &gEfiLoadedImageProtocolGuid,
+ (VOID **)&LoadedImage
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ EfiInitializeFwVolDevicepathNode (&FileNode, FileGuid);
+ DevicePath = DevicePathFromHandle (LoadedImage->DeviceHandle);
+ ASSERT (DevicePath != NULL);
+ DevicePath = AppendDevicePathNode (
+ DevicePath,
+ (EFI_DEVICE_PATH_PROTOCOL *)&FileNode
+ );
+ ASSERT (DevicePath != NULL);
+
+ Status = EfiBootManagerInitializeLoadOption (
+ &NewOption,
+ LoadOptionNumberUnassigned,
+ LoadOptionTypeBoot,
+ Attributes,
+ Description,
+ DevicePath,
+ NULL,
+ 0
+ );
+ ASSERT_EFI_ERROR (Status);
+ FreePool (DevicePath);
+
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &BootOptionCount,
+ LoadOptionTypeBoot
+ );
+
+ OptionIndex = EfiBootManagerFindLoadOption (
+ &NewOption,
+ BootOptions,
+ BootOptionCount
+ );
+
+ if (OptionIndex == -1) {
+ Status = EfiBootManagerAddLoadOptionVariable (&NewOption, MAX_UINTN);
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ EfiBootManagerFreeLoadOption (&NewOption);
+ EfiBootManagerFreeLoadOptions (BootOptions, BootOptionCount);
+}
+
+/**
+ Remove all MemoryMapped (...)/FvFile (...) and Fv (...)/FvFile (...) boot options
+ whose device paths do not resolve exactly to an FvFile in the system.
+
+ This removes any boot options that point to binaries built into the firmware
+ and have become stale due to any of the following:
+ - FvMain's base address or size changed (historical),
+ - FvMain's FvNameGuid changed,
+ - the FILE_GUID of the pointed-to binary changed,
+ - the referenced binary is no longer built into the firmware.
+
+ EfiBootManagerFindLoadOption () used in PlatformRegisterFvBootOption () only
+ avoids exact duplicates.
+**/
+VOID
+RemoveStaleFvFileOptions (
+ VOID
+ )
+{
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN BootOptionCount;
+ UINTN Index;
+
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &BootOptionCount,
+ LoadOptionTypeBoot
+ );
+
+ for (Index = 0; Index < BootOptionCount; ++Index) {
+ EFI_DEVICE_PATH_PROTOCOL *Node1, *Node2, *SearchNode;
+ EFI_STATUS Status;
+ EFI_HANDLE FvHandle;
+
+ //
+ // If the device path starts with neither MemoryMapped (...) nor Fv (...),
+ // then keep the boot option.
+ //
+ Node1 = BootOptions[Index].FilePath;
+ if (!((DevicePathType (Node1) == HARDWARE_DEVICE_PATH) &&
+ (DevicePathSubType (Node1) == HW_MEMMAP_DP)) &&
+ !((DevicePathType (Node1) == MEDIA_DEVICE_PATH) &&
+ (DevicePathSubType (Node1) == MEDIA_PIWG_FW_VOL_DP)))
+ {
+ continue;
+ }
+
+ //
+ // If the second device path node is not FvFile (...), then keep the boot
+ // option.
+ //
+ Node2 = NextDevicePathNode (Node1);
+ if ((DevicePathType (Node2) != MEDIA_DEVICE_PATH) ||
+ (DevicePathSubType (Node2) != MEDIA_PIWG_FW_FILE_DP))
+ {
+ continue;
+ }
+
+ //
+ // Locate the Firmware Volume2 protocol instance that is denoted by the
+ // boot option. If this lookup fails (i.e., the boot option references a
+ // firmware volume that doesn't exist), then we'll proceed to delete the
+ // boot option.
+ //
+ SearchNode = Node1;
+ Status = gBS->LocateDevicePath (
+ &gEfiFirmwareVolume2ProtocolGuid,
+ &SearchNode,
+ &FvHandle
+ );
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // The firmware volume was found; now let's see if it contains the FvFile
+ // identified by GUID.
+ //
+ EFI_FIRMWARE_VOLUME2_PROTOCOL *FvProtocol;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FvFileNode;
+ UINTN BufferSize;
+ EFI_FV_FILETYPE FoundType;
+ EFI_FV_FILE_ATTRIBUTES FileAttributes;
+ UINT32 AuthenticationStatus;
+
+ Status = gBS->HandleProtocol (
+ FvHandle,
+ &gEfiFirmwareVolume2ProtocolGuid,
+ (VOID **)&FvProtocol
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ FvFileNode = (MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *)Node2;
+ //
+ // Buffer==NULL means we request metadata only: BufferSize, FoundType,
+ // FileAttributes.
+ //
+ Status = FvProtocol->ReadFile (
+ FvProtocol,
+ &FvFileNode->FvFileName, // NameGuid
+ NULL, // Buffer
+ &BufferSize,
+ &FoundType,
+ &FileAttributes,
+ &AuthenticationStatus
+ );
+ if (!EFI_ERROR (Status)) {
+ //
+ // The FvFile was found. Keep the boot option.
+ //
+ continue;
+ }
+ }
+
+ //
+ // Delete the boot option.
+ //
+ Status = EfiBootManagerDeleteLoadOptionVariable (
+ BootOptions[Index].OptionNumber,
+ LoadOptionTypeBoot
+ );
+ DEBUG_CODE_BEGIN ();
+ CHAR16 *DevicePathString;
+
+ DevicePathString = ConvertDevicePathToText (
+ BootOptions[Index].FilePath,
+ FALSE,
+ FALSE
+ );
+ DEBUG ((
+ EFI_ERROR (Status) ? EFI_D_WARN : DEBUG_VERBOSE,
+ "%a: removing stale Boot#%04x %s: %r\n",
+ __FUNCTION__,
+ (UINT32)BootOptions[Index].OptionNumber,
+ DevicePathString == NULL ? L"<unavailable>" : DevicePathString,
+ Status
+ ));
+ if (DevicePathString != NULL) {
+ FreePool (DevicePathString);
+ }
+
+ DEBUG_CODE_END ();
+ }
+
+ EfiBootManagerFreeLoadOptions (BootOptions, BootOptionCount);
+}
+
+/**
+ Register the boot option And Keys.
+
+ @param VOID
+
+ @retval VOID
+**/
+VOID
+PlatformRegisterOptionsAndKeys (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_INPUT_KEY Enter;
+ EFI_INPUT_KEY F2;
+ EFI_INPUT_KEY Esc;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootOption;
+
+ //
+ // Register ENTER as CONTINUE key
+ //
+ Enter.ScanCode = SCAN_NULL;
+ Enter.UnicodeChar = CHAR_CARRIAGE_RETURN;
+
+ Status = EfiBootManagerRegisterContinueKeyOption (0, &Enter, NULL);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Map F2 and ESC to Boot Manager Menu
+ //
+ F2.ScanCode = SCAN_F2;
+ F2.UnicodeChar = CHAR_NULL;
+ Esc.ScanCode = SCAN_ESC;
+ Esc.UnicodeChar = CHAR_NULL;
+ Status = EfiBootManagerGetBootManagerMenu (&BootOption);
+ ASSERT_EFI_ERROR (Status);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ (UINT16)BootOption.OptionNumber,
+ 0,
+ &F2,
+ NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ (UINT16)BootOption.OptionNumber,
+ 0,
+ &Esc,
+ NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+}
+
+//
+// BDS Platform Functions
+//
+
+/**
+ Do the platform init, can be customized by OEM/IBV
+ Possible things that can be done in PlatformBootManagerBeforeConsole:
+ > Update console variable: 1. include hot-plug devices;
+ > 2. Clear ConIn and add SOL for AMT
+ > Register new Driver#### or Boot####
+ > Register new Key####: e.g.: F12
+ > Signal ReadyToLock event
+ > Authentication action: 1. connect Auth devices;
+ > 2. Identify auto logon user.
+**/
+VOID
+EFIAPI
+PlatformBootManagerBeforeConsole (
+ VOID
+ )
+{
+ RETURN_STATUS PcdStatus;
+
+ //
+ // Signal EndOfDxe PI Event
+ //
+ EfiEventGroupSignal (&gEfiEndOfDxeEventGroupGuid);
+
+ //
+ // Dispatch deferred images after EndOfDxe event.
+ //
+ EfiBootManagerDispatchDeferredImages ();
+
+ //
+ // Locate the PCI root bridges and make the PCI bus driver connect each,
+ // non-recursively. This will produce a number of child handles with PciIo on
+ // them.
+ //
+ FilterAndProcess (&gEfiPciRootBridgeIoProtocolGuid, NULL, Connect);
+
+ //
+ // Signal the ACPI platform driver that it can download QEMU ACPI tables.
+ //
+ EfiEventGroupSignal (&gRootBridgesConnectedEventGroupGuid);
+
+ //
+ // Find all display class PCI devices (using the handles from the previous
+ // step), and connect them non-recursively. This should produce a number of
+ // child handles with GOPs on them.
+ //
+ FilterAndProcess (&gEfiPciIoProtocolGuid, IsPciDisplay, Connect);
+
+ //
+ // Now add the device path of all handles with GOP on them to ConOut and
+ // ErrOut.
+ //
+ FilterAndProcess (&gEfiGraphicsOutputProtocolGuid, NULL, AddOutput);
+
+ //
+ // Add the hardcoded short-form USB keyboard device path to ConIn.
+ //
+ EfiBootManagerUpdateConsoleVariable (
+ ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mUsbKeyboard,
+ NULL
+ );
+
+ //
+ // Add the hardcoded serial console device path to ConIn, ConOut, ErrOut.
+ //
+ CopyGuid (&mSerialConsole.TermType.Guid, &gEfiTtyTermGuid);
+ EfiBootManagerUpdateConsoleVariable (
+ ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+ EfiBootManagerUpdateConsoleVariable (
+ ConOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+ EfiBootManagerUpdateConsoleVariable (
+ ErrOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+
+ //
+ // Set the front page timeout from the QEMU configuration.
+ //
+ PcdStatus = PcdSet16S (
+ PcdPlatformBootTimeOut,
+ GetFrontPageTimeoutFromQemu ()
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ //
+ // Register platform-specific boot options and keyboard shortcuts.
+ //
+ PlatformRegisterOptionsAndKeys ();
+}
+
+/**
+ Do the platform specific action after the console is ready
+ Possible things that can be done in PlatformBootManagerAfterConsole:
+ > Console post action:
+ > Dynamically switch output mode from 100x31 to 80x25 for certain senarino
+ > Signal console ready platform customized event
+ > Run diagnostics like memory testing
+ > Connect certain devices
+ > Dispatch aditional option roms
+ > Special boot: e.g.: USB boot, enter UI
+**/
+VOID
+EFIAPI
+PlatformBootManagerAfterConsole (
+ VOID
+ )
+{
+ //
+ // Show the splash screen.
+ //
+ BootLogoEnableLogo ();
+
+ //
+ // Connect the rest of the devices.
+ //
+ EfiBootManagerConnectAll ();
+
+ //
+ // Process QEMU's -kernel command line option. Note that the kernel booted
+ // this way should receive ACPI tables, which is why we connect all devices
+ // first (see above) -- PCI enumeration blocks ACPI table installation, if
+ // there is a PCI host.
+ //
+ TryRunningQemuKernel ();
+
+ //
+ // Enumerate all possible boot options, then filter and reorder them based on
+ // the QEMU configuration.
+ //
+ EfiBootManagerRefreshAllBootOption ();
+
+ //
+ // Register UEFI Shell
+ //
+ PlatformRegisterFvBootOption (
+ &gUefiShellFileGuid,
+ L"EFI Internal Shell",
+ LOAD_OPTION_ACTIVE
+ );
+
+ RemoveStaleFvFileOptions ();
+ SetBootOrderFromQemu ();
+}
+
+/**
+ This function is called each second during the boot manager waits the
+ timeout.
+
+ @param TimeoutRemain The remaining timeout.
+**/
+VOID
+EFIAPI
+PlatformBootManagerWaitCallback (
+ IN UINT16 TimeoutRemain
+ )
+{
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Black;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION White;
+ UINT16 Timeout;
+
+ Timeout = PcdGet16 (PcdPlatformBootTimeOut);
+
+ Black.Raw = 0x00000000;
+ White.Raw = 0x00FFFFFF;
+
+ BootLogoUpdateProgress (
+ White.Pixel,
+ Black.Pixel,
+ L"Start boot option",
+ White.Pixel,
+ (Timeout - TimeoutRemain) * 100 / Timeout,
+ 0
+ );
+}
+
+/**
+ The function is called when no boot option could be launched,
+ including platform recovery options and options pointing to applications
+ built into firmware volumes.
+
+ If this function returns, BDS attempts to enter an infinite loop.
+**/
+VOID
+EFIAPI
+PlatformBootManagerUnableToBoot (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_INPUT_KEY Key;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootManagerMenu;
+ UINTN Index;
+
+ //
+ // BootManagerMenu doesn't contain the correct information when return status
+ // is EFI_NOT_FOUND.
+ //
+ Status = EfiBootManagerGetBootManagerMenu (&BootManagerMenu);
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ //
+ // Normally BdsDxe does not print anything to the system console, but this is
+ // a last resort -- the end-user will likely not see any DEBUG messages
+ // logged in this situation.
+ //
+ // AsciiPrint () will NULL-check gST->ConOut internally. We check gST->ConIn
+ // here to see if it makes sense to request and wait for a keypress.
+ //
+ if (gST->ConIn != NULL) {
+ AsciiPrint (
+ "%a: No bootable option or device was found.\n"
+ "%a: Press any key to enter the Boot Manager Menu.\n",
+ gEfiCallerBaseName,
+ gEfiCallerBaseName
+ );
+ Status = gBS->WaitForEvent (1, &gST->ConIn->WaitForKey, &Index);
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (Index == 0);
+
+ //
+ // Drain any queued keys.
+ //
+ while (!EFI_ERROR (gST->ConIn->ReadKeyStroke (gST->ConIn, &Key))) {
+ //
+ // just throw away Key
+ //
+ }
+ }
+
+ for ( ; ; ) {
+ EfiBootManagerBoot (&BootManagerMenu);
+ }
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h
new file mode 100644
index 0000000000..140e6b5c23
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h
@@ -0,0 +1,112 @@
+/** @file
+ Head file for BDS Platform specific code
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef PLATFORM_BM_H_
+#define PLATFORM_BM_H_
+
+#include <Library/DevicePathLib.h>
+
+#define DP_NODE_LEN(Type) { (UINT8)sizeof (Type), (UINT8)(sizeof (Type) >> 8) }
+
+#define SERIAL_DXE_FILE_GUID { \
+ 0xD3987D4B, 0x971A, 0x435F, \
+ { 0x8C, 0xAF, 0x49, 0x67, 0xEB, 0x62, 0x72, 0x41 } \
+ }
+
+#define ALIGN_UP(addr, align) \
+ ((addr + (typeof (addr)) align - 1) & ~((typeof (addr)) align - 1))
+
+#pragma pack (1)
+typedef struct {
+ VENDOR_DEVICE_PATH SerialDxe;
+ UART_DEVICE_PATH Uart;
+ VENDOR_DEFINED_DEVICE_PATH TermType;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_SERIAL_CONSOLE;
+#pragma pack ()
+
+#pragma pack (1)
+typedef struct {
+ USB_CLASS_DEVICE_PATH Keyboard;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_USB_KEYBOARD;
+#pragma pack ()
+
+/**
+ Check if the handle satisfies a particular condition.
+
+ @param[in] Handle The handle to check.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+
+ @retval TRUE The condition is satisfied.
+ @retval FALSE Otherwise. This includes the case when the condition could not
+ be fully evaluated due to an error.
+**/
+typedef
+BOOLEAN
+(EFIAPI *FILTER_FUNCTION)(
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+/**
+ Process a handle.
+
+ @param[in] Handle The handle to process.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+**/
+typedef
+VOID
+(EFIAPI *CALLBACK_FUNCTION)(
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+/**
+ * execute from kernel entry point.
+ *
+ * @param[in] Argc The count of args.
+ * @param[in] Argv The pointer to args array.
+ * @param[in] Bpi The pointer to bootparaminterface struct.
+ * @param[in] Vec The fourth args for kernel.
+ ***/
+typedef
+VOID
+(EFIAPI *EFI_KERNEL_ENTRY_POINT)(
+ IN UINTN Argc,
+ IN VOID *Argv,
+ IN VOID *Bpi,
+ IN VOID *Vec
+ );
+
+/**
+ Download the kernel, the initial ramdisk, and the kernel command line from
+ QEMU's fw_cfg. Construct a minimal SimpleFileSystem that contains the two
+ image files, and load and start the kernel from it.
+
+ The kernel will be instructed via its command line to load the initrd from
+ the same Simple FileSystem.
+
+ @retval EFI_NOT_FOUND Kernel image was not found.
+ @retval EFI_OUT_OF_RESOURCES Memory allocation failed.
+ @retval EFI_PROTOCOL_ERROR Unterminated kernel command line.
+
+ @return Error codes from any of the underlying
+ functions. On success, the function doesn't
+ return.
+**/
+EFI_STATUS
+EFIAPI
+TryRunningQemuKernel (
+ VOID
+ );
+
+#endif // PLATFORM_BM_H_
diff --git a/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
new file mode 100644
index 0000000000..fa4435f519
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
@@ -0,0 +1,73 @@
+## @file
+# Implementation for PlatformBootManagerLib library class interfaces.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PlatformBootManagerLib
+ FILE_GUID = 477E5D8C-DB2E-AB4D-8C2C-6B33DE5CB638
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformBootManagerLib|DXE_DRIVER
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ PlatformBm.c
+ QemuKernel.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+ ShellPkg/ShellPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ BootLogoLib
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ PcdLib
+ PrintLib
+ QemuBootOrderLib
+ QemuLoadImageLib
+ QemuFwCfgLib
+ UefiBootManagerLib
+ UefiBootServicesTableLib
+ UefiLib
+ UefiRuntimeServicesTableLib
+
+[FixedPcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut
+
+[Guids]
+ gEfiFileInfoGuid
+ gEfiFileSystemInfoGuid
+ gEfiFileSystemVolumeLabelInfoIdGuid
+ gEfiEndOfDxeEventGroupGuid
+ gRootBridgesConnectedEventGroupGuid
+ gUefiShellFileGuid
+ gEfiTtyTermGuid
+
+[Protocols]
+ gEfiDevicePathProtocolGuid
+ gEfiFirmwareVolume2ProtocolGuid
+ gEfiGraphicsOutputProtocolGuid
+ gEfiLoadedImageProtocolGuid
+ gEfiPciRootBridgeIoProtocolGuid
+ gEfiSimpleFileSystemProtocolGuid
diff --git a/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c
new file mode 100644
index 0000000000..50489a6fa5
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c
@@ -0,0 +1,81 @@
+/** @file
+ Try to run Linux kernel.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - mem - Memory
+ - Bpi - Boot Parameter Interface
+ - FwCfg - FirmWare Configure
+**/
+
+#include <Library/QemuLoadImageLib.h>
+#include <Library/ReportStatusCodeLib.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+/**
+ Download the kernel, the initial ramdisk, and the kernel command line from
+ QEMU's fw_cfg. Construct a minimal SimpleFileSystem that contains the two
+ image files, and load and start the kernel from it.
+
+ The kernel will be instructed via its command line to load the initrd from
+ the same Simple FileSystem.
+
+ @retval EFI_NOT_FOUND Kernel image was not found.
+ @retval EFI_OUT_OF_RESOURCES Memory allocation failed.
+ @retval EFI_PROTOCOL_ERROR Unterminated kernel command line.
+
+ @return Error codes from any of the underlying
+ functions. On success, the function doesn't
+ return.
+**/
+EFI_STATUS
+TryRunningQemuKernel (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE KernelImageHandle;
+
+ Status = QemuLoadKernelImage (&KernelImageHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Signal the EFI_EVENT_GROUP_READY_TO_BOOT event.
+ //
+ EfiSignalEventReadyToBoot ();
+
+ REPORT_STATUS_CODE (
+ EFI_PROGRESS_CODE,
+ (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT)
+ );
+
+ //
+ // Start the image.
+ //
+ Status = QemuStartKernelImage (&KernelImageHandle);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: QemuStartKernelImage(): %r\n",
+ __FUNCTION__,
+ Status
+ ));
+ }
+
+ QemuUnloadKernelImage (KernelImageHandle);
+
+ return Status;
+}
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110728): https://edk2.groups.io/g/devel/message/110728
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library Chao Li
@ 2023-11-08 22:24 ` Laszlo Ersek
2023-11-10 7:09 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-08 22:24 UTC (permalink / raw)
To: devel, lichao
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
On 11/6/23 04:30, Chao Li wrote:
> This library is provides boot mananger interfaces, and it is referenced
> from ArmVirtPkg.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
> Co-authored-by: Bibo Mao <maobibo@loongson.cn>
> ---
> .../PlatformBootManagerLib/PlatformBm.c | 829 ++++++++++++++++++
> .../PlatformBootManagerLib/PlatformBm.h | 112 +++
> .../PlatformBootManagerLib.inf | 73 ++
> .../PlatformBootManagerLib/QemuKernel.c | 81 ++
> 4 files changed, 1095 insertions(+)
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c
I wish it were "referenced"; it's not referenced but *copied*.
Why is the library in ArmVirtPkg not good enough? What are the
differences? Etc.
I'm not even asking about the specifics here, but trying to show you how
you should please *present* this platform enablement for review.
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110933): https://edk2.groups.io/g/devel/message/110933
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-08 22:24 ` Laszlo Ersek
@ 2023-11-10 7:09 ` Chao Li
2023-11-10 9:46 ` Gerd Hoffmann
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-10 7:09 UTC (permalink / raw)
To: devel, lersek
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 2122 bytes --]
Hi Laszlo,
Sorry, I'm not check carefully, it is really **copied**, and we not
think the ARM version is not good enough.
So, can I move this library to OvmfPkg so other ARCH use it easily?
Thanks,
Chao
在 2023/11/9 06:24, Laszlo Ersek 写道:
> On 11/6/23 04:30, Chao Li wrote:
>> This library is provides boot mananger interfaces, and it is referenced
>> from ArmVirtPkg.
>>
>> BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>>
>> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
>> Cc: Jiewen Yao<jiewen.yao@intel.com>
>> Cc: Jordan Justen<jordan.l.justen@intel.com>
>> Cc: Gerd Hoffmann<kraxel@redhat.com>
>> Signed-off-by: Chao Li<lichao@loongson.cn>
>> Co-authored-by: Xianglai Li<lixianglai@loongson.cn>
>> Co-authored-by: Bibo Mao<maobibo@loongson.cn>
>> ---
>> .../PlatformBootManagerLib/PlatformBm.c | 829 ++++++++++++++++++
>> .../PlatformBootManagerLib/PlatformBm.h | 112 +++
>> .../PlatformBootManagerLib.inf | 73 ++
>> .../PlatformBootManagerLib/QemuKernel.c | 81 ++
>> 4 files changed, 1095 insertions(+)
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.c
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBm.h
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
>> create mode 100644 OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/QemuKernel.c
> I wish it were "referenced"; it's not referenced but *copied*.
>
> Why is the library in ArmVirtPkg not good enough? What are the
> differences? Etc.
>
> I'm not even asking about the specifics here, but trying to show you how
> you should please *present* this platform enablement for review.
>
> Laszlo
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111021): https://edk2.groups.io/g/devel/message/111021
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 3961 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-10 7:09 ` Chao Li
@ 2023-11-10 9:46 ` Gerd Hoffmann
2023-11-13 11:08 ` Laszlo Ersek
0 siblings, 1 reply; 71+ messages in thread
From: Gerd Hoffmann @ 2023-11-10 9:46 UTC (permalink / raw)
To: Chao Li
Cc: devel, lersek, Ard Biesheuvel, Jiewen Yao, Jordan Justen,
Xianglai Li, Bibo Mao
On Fri, Nov 10, 2023 at 03:09:47PM +0800, Chao Li wrote:
> Hi Laszlo,
>
> Sorry, I'm not check carefully, it is really **copied**, and we not think
> the ARM version is not good enough.
>
> So, can I move this library to OvmfPkg so other ARCH use it easily?
Moving code from ArmVirtPkg to OvmfPkg is fine.
OvmfPkg is the home for both x86 virtual machine bits and shared code.
The later used to be mostly virtio drivers, but with the arrival of
riscv some fdt support code has already moved from ArmVirtPkg to OvmfPkg
so arm and riscv can share it. Doing the same for loongarch is
perfectly fine.
take care,
Gerd
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111026): https://edk2.groups.io/g/devel/message/111026
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-10 9:46 ` Gerd Hoffmann
@ 2023-11-13 11:08 ` Laszlo Ersek
2023-11-15 3:21 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-13 11:08 UTC (permalink / raw)
To: Gerd Hoffmann, Chao Li
Cc: devel, Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li,
Bibo Mao
On 11/10/23 10:46, Gerd Hoffmann wrote:
> On Fri, Nov 10, 2023 at 03:09:47PM +0800, Chao Li wrote:
>> Hi Laszlo,
>>
>> Sorry, I'm not check carefully, it is really **copied**, and we not think
>> the ARM version is not good enough.
>>
>> So, can I move this library to OvmfPkg so other ARCH use it easily?
>
> Moving code from ArmVirtPkg to OvmfPkg is fine.
>
> OvmfPkg is the home for both x86 virtual machine bits and shared code.
> The later used to be mostly virtio drivers, but with the arrival of
> riscv some fdt support code has already moved from ArmVirtPkg to OvmfPkg
> so arm and riscv can share it. Doing the same for loongarch is
> perfectly fine.
Agreed!
The naming of course remains tricky. :) It's not easy to come up with
good names for distinguishing various instances of the same library class.
I suggest renaming "OvmfPkg/PlatformBootManagerLib" to
"PlatformBootManagerLibX86", and calling ArmVirtPkg's instance (once
moved) PlatformBootManagerLibGeneric or just PlatformBootManagerLib.
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111140): https://edk2.groups.io/g/devel/message/111140
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-13 11:08 ` Laszlo Ersek
@ 2023-11-15 3:21 ` Chao Li
2023-11-15 12:52 ` Laszlo Ersek
0 siblings, 1 reply; 71+ messages in thread
From: Chao Li @ 2023-11-15 3:21 UTC (permalink / raw)
To: devel, lersek, Gerd Hoffmann
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 2911 bytes --]
Well, let's discuss the ARM version name once moved.
I have two plans:
*Plan A:*
Merge the ARM version into PlatformBootmanagerLib and modify the inf
file to separate X64 and other ARCH, like be:
[Sources.Common]
QemuKernel.c
BdsPlatform.h
[Sources.X64, Sources.IA32]
BdsPlatform.c
PaltformData.c
[Sources.ARM, Sources.AARCH64, Sources.RISCV64, Source.LOONGARCH64]
PlatformBm.c
[LibraryClasses.Common]
BaseLib
BaseMemoryLib
BootLogoLib
DebugLib
DevicePathLib
MemoryAllocationLib
PcdLib
...
[LibraryClasses.X64, LibraryClasses.IA32]
QemuFwCfgLib
QemuFwCfgS3Lib
...
[LibraryClasses.ARM, LibraryClasses.AARCH64, LibraryClasses.RISCV,
LibraryClasses.LOONGARCH64]
TpmPlatformHierarchyLib
...
The above pseudocode are unverified and will definitely be subject to
modification.
*Plan B:*
Moved the ARM version into OvmfPkg and got a new name. In my opinion,
the X86 version takes into account the STR, Tcg2 and Xen platform, so it
look like more complete(only for X86, just my opinion). In this case, I
think what about the X86 version still being named
PlatformBootManagerLib and the ARM version being named
PlatformBootManagerLibLight?
Both of the above plans can achieve the goal. I prefer Plan A. I want to
know your opinions, so hope hear back from you!
Thanks,
Chao
On 2023/11/13 19:08, Laszlo Ersek wrote:
> On 11/10/23 10:46, Gerd Hoffmann wrote:
>> On Fri, Nov 10, 2023 at 03:09:47PM +0800, Chao Li wrote:
>>> Hi Laszlo,
>>>
>>> Sorry, I'm not check carefully, it is really **copied**, and we not think
>>> the ARM version is not good enough.
>>>
>>> So, can I move this library to OvmfPkg so other ARCH use it easily?
>> Moving code from ArmVirtPkg to OvmfPkg is fine.
>>
>> OvmfPkg is the home for both x86 virtual machine bits and shared code.
>> The later used to be mostly virtio drivers, but with the arrival of
>> riscv some fdt support code has already moved from ArmVirtPkg to OvmfPkg
>> so arm and riscv can share it. Doing the same for loongarch is
>> perfectly fine.
> Agreed!
>
> The naming of course remains tricky. :) It's not easy to come up with
> good names for distinguishing various instances of the same library class.
>
> I suggest renaming "OvmfPkg/PlatformBootManagerLib" to
> "PlatformBootManagerLibX86", and calling ArmVirtPkg's instance (once
> moved) PlatformBootManagerLibGeneric or just PlatformBootManagerLib.
>
> Laszlo
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111232): https://edk2.groups.io/g/devel/message/111232
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 5438 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-15 3:21 ` Chao Li
@ 2023-11-15 12:52 ` Laszlo Ersek
2023-11-16 7:09 ` Chao Li
0 siblings, 1 reply; 71+ messages in thread
From: Laszlo Ersek @ 2023-11-15 12:52 UTC (permalink / raw)
To: devel, lichao, Gerd Hoffmann
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li, Bibo Mao
Hi Chao,
On 11/15/23 04:21, Chao Li wrote:
> Well, let's discuss the ARM version name once moved.
>
> I have two plans:
>
> *Plan A:*
>
> Merge the ARM version into PlatformBootmanagerLib and modify the inf
> file to separate X64 and other ARCH, like be:
>
> [Sources.Common]
>
> QemuKernel.c
>
> BdsPlatform.h
>
> [Sources.X64, Sources.IA32]
>
> BdsPlatform.c
>
> PaltformData.c
>
> [Sources.ARM, Sources.AARCH64, Sources.RISCV64, Source.LOONGARCH64]
>
> PlatformBm.c
>
> [LibraryClasses.Common]
>
> BaseLib
>
> BaseMemoryLib
>
> BootLogoLib
>
> DebugLib
>
> DevicePathLib
>
> MemoryAllocationLib
>
> PcdLib
>
> ...
>
> [LibraryClasses.X64, LibraryClasses.IA32]
>
> QemuFwCfgLib
>
> QemuFwCfgS3Lib
>
> ...
>
> [LibraryClasses.ARM, LibraryClasses.AARCH64, LibraryClasses.RISCV,
> LibraryClasses.LOONGARCH64]
>
> TpmPlatformHierarchyLib
>
> ...
>
>
> The above pseudocode are unverified and will definitely be subject to
> modification.
>
>
> *Plan B:*
>
> Moved the ARM version into OvmfPkg and got a new name. In my opinion,
> the X86 version takes into account the STR, Tcg2 and Xen platform, so it
> look like more complete(only for X86, just my opinion). In this case, I
> think what about the X86 version still being named
> PlatformBootManagerLib and the ARM version being named
> PlatformBootManagerLibLight?
>
>
> Both of the above plans can achieve the goal. I prefer Plan A. I want to
> know your opinions, so hope hear back from you!
I prefer Plan B.
ArmVirtPkg's PlatformBootManagerLib instance does not carry the cruft
that had accumulated in OVMF's instance (before we created ArmVirtPkg's
instance), and that has continued growing in OVMF's instance since we
created ArmVirtPkg's instance. I'm sure there are some bits that are
duplicated between both platforms, but in this case, the benefits of the
separation strongly outweigh any disadvantages of code duplication, for
me anyway.
Whenever I want to refer to a pristine PlatformBootManagerLib instance,
I use ArmVirtPkg's. I like *not* being tripped up by the quirks and
customizations of OvmfPkg's lib instance, whenever I look at the source
code. Even if we could find technical solutions for disabling those
customizations for ArmVirt at build time or at runtime, they'd still be
unwelcome distractions, when reading the source code, or browsing the
edk2 directory tree.
There is no generic rule for deciding between "customization in place"
vs. "duplicating for customization". Both have benefits and costs.
AFAICT, we usually pick one versus the other based on "audience
homogeneity" -- the code structure is supposed to follow the community
structure.
In this case, I prefer Plan B.
Thanks,
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111272): https://edk2.groups.io/g/devel/message/111272
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library
2023-11-15 12:52 ` Laszlo Ersek
@ 2023-11-16 7:09 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-16 7:09 UTC (permalink / raw)
To: devel, lersek, Gerd Hoffmann
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Xianglai Li, Bibo Mao
[-- Attachment #1: Type: text/plain, Size: 3495 bytes --]
Hi Laszlo,
OK, I will do plan B. Moved ARM version to OvmfPkg/Library/ and rename
it to PlatformBootManagerLibLight.
Thanks,
Chao
On 2023/11/15 20:52, Laszlo Ersek wrote:
> Hi Chao,
>
> On 11/15/23 04:21, Chao Li wrote:
>> Well, let's discuss the ARM version name once moved.
>>
>> I have two plans:
>>
>> *Plan A:*
>>
>> Merge the ARM version into PlatformBootmanagerLib and modify the inf
>> file to separate X64 and other ARCH, like be:
>>
>> [Sources.Common]
>>
>> QemuKernel.c
>>
>> BdsPlatform.h
>>
>> [Sources.X64, Sources.IA32]
>>
>> BdsPlatform.c
>>
>> PaltformData.c
>>
>> [Sources.ARM, Sources.AARCH64, Sources.RISCV64, Source.LOONGARCH64]
>>
>> PlatformBm.c
>>
>> [LibraryClasses.Common]
>>
>> BaseLib
>>
>> BaseMemoryLib
>>
>> BootLogoLib
>>
>> DebugLib
>>
>> DevicePathLib
>>
>> MemoryAllocationLib
>>
>> PcdLib
>>
>> ...
>>
>> [LibraryClasses.X64, LibraryClasses.IA32]
>>
>> QemuFwCfgLib
>>
>> QemuFwCfgS3Lib
>>
>> ...
>>
>> [LibraryClasses.ARM, LibraryClasses.AARCH64, LibraryClasses.RISCV,
>> LibraryClasses.LOONGARCH64]
>>
>> TpmPlatformHierarchyLib
>>
>> ...
>>
>>
>> The above pseudocode are unverified and will definitely be subject to
>> modification.
>>
>>
>> *Plan B:*
>>
>> Moved the ARM version into OvmfPkg and got a new name. In my opinion,
>> the X86 version takes into account the STR, Tcg2 and Xen platform, so it
>> look like more complete(only for X86, just my opinion). In this case, I
>> think what about the X86 version still being named
>> PlatformBootManagerLib and the ARM version being named
>> PlatformBootManagerLibLight?
>>
>>
>> Both of the above plans can achieve the goal. I prefer Plan A. I want to
>> know your opinions, so hope hear back from you!
> I prefer Plan B.
>
> ArmVirtPkg's PlatformBootManagerLib instance does not carry the cruft
> that had accumulated in OVMF's instance (before we created ArmVirtPkg's
> instance), and that has continued growing in OVMF's instance since we
> created ArmVirtPkg's instance. I'm sure there are some bits that are
> duplicated between both platforms, but in this case, the benefits of the
> separation strongly outweigh any disadvantages of code duplication, for
> me anyway.
>
> Whenever I want to refer to a pristine PlatformBootManagerLib instance,
> I use ArmVirtPkg's. I like *not* being tripped up by the quirks and
> customizations of OvmfPkg's lib instance, whenever I look at the source
> code. Even if we could find technical solutions for disabling those
> customizations for ArmVirt at build time or at runtime, they'd still be
> unwelcome distractions, when reading the source code, or browsing the
> edk2 directory tree.
>
> There is no generic rule for deciding between "customization in place"
> vs. "duplicating for customization". Both have benefits and costs.
> AFAICT, we usually pick one versus the other based on "audience
> homogeneity" -- the code structure is supposed to follow the community
> structure.
>
> In this case, I prefer Plan B.
>
> Thanks,
> Laszlo
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111302): https://edk2.groups.io/g/devel/message/111302
Mute This Topic: https://groups.io/mt/102413902/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 4469 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
* [edk2-devel] [PATCH v2 25/30] OvmfPkg/LoongArchVirt: Add FdtQemuFwCfgLib
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (23 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 24/30] OvmfPkg/LoongArchVirt: Add platform boot manager library Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 26/30] OvmfPkg/LoongArchVirt: Add reset system library Chao Li
` (7 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
This library for PEI phase, and obtains the QemuFwCfg base address by
directly parsing the FDT, reads and writes the data in QemuFwCfg by
operating on the QemuFwCfg base address.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.c | 505 ++++++++++++++++++
.../FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf | 42 ++
.../FdtQemuFwCfgLib/QemuFwCfgLibInternal.h | 73 +++
.../Library/FdtQemuFwCfgLib/QemuFwCfgPei.c | 117 ++++
4 files changed, 737 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgLibInternal.h
create mode 100644 OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgPei.c
diff --git a/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.c b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.c
new file mode 100644
index 0000000000..4009a76a80
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.c
@@ -0,0 +1,505 @@
+/** @file
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - FwCfg - firmWare Configure
+ - CTL - Control
+**/
+
+#include "Uefi.h"
+#include <Base.h>
+#include <PiPei.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/QemuFwCfgLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Uefi/UefiBaseType.h>
+#include <Library/HobLib.h>
+#include <libfdt.h>
+#include "QemuFwCfgLibInternal.h"
+
+EFI_GUID mFwCfgSelectorAddressGuid = FW_CONFIG_SELECTOR_ADDRESS_HOB_GUID;
+EFI_GUID mFwCfgDataAddressGuid = FW_CONFIG_DATA_ADDRESS_HOB_GUID;
+
+STATIC UINTN mFwCfgSelectorAddress;
+STATIC UINTN mFwCfgDataAddress;
+
+/**
+ To get firmware configure selector address.
+
+ @param VOID
+
+ @retval firmware configure selector address
+**/
+UINTN
+EFIAPI
+QemuGetFwCfgSelectorAddress (
+ VOID
+ )
+{
+ UINTN FwCfgSelectorAddress;
+ EFI_HOB_GUID_TYPE *GuidHob;
+ VOID *DataInHob;
+
+ FwCfgSelectorAddress = mFwCfgSelectorAddress;
+ GuidHob = NULL;
+ DataInHob = NULL;
+
+ if (FwCfgSelectorAddress == 0) {
+ GuidHob = GetFirstGuidHob (&mFwCfgSelectorAddressGuid);
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ FwCfgSelectorAddress = (UINT64)(*(UINTN *)DataInHob);
+ }
+
+ return FwCfgSelectorAddress;
+}
+
+/**
+ To get firmware configure Data address.
+
+ @param VOID
+
+ @retval firmware configure data address
+**/
+UINTN
+EFIAPI
+QemuGetFwCfgDataAddress (
+ VOID
+ )
+{
+ UINTN FwCfgDataAddress;
+ EFI_HOB_GUID_TYPE *GuidHob;
+ VOID *DataInHob;
+
+ FwCfgDataAddress = mFwCfgDataAddress;
+ GuidHob = NULL;
+ DataInHob = NULL;
+
+ if (FwCfgDataAddress == 0) {
+ GuidHob = GetFirstGuidHob (&mFwCfgDataAddressGuid);
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ FwCfgDataAddress = (UINT64)(*(UINTN *)DataInHob);
+ }
+
+ return FwCfgDataAddress;
+}
+
+/**
+ Selects a firmware configuration item for reading.
+
+ Following this call, any data read from this item will start from
+ the beginning of the configuration item's data.
+
+ @param[in] QemuFwCfgItem - Firmware Configuration item to read
+**/
+VOID
+EFIAPI
+QemuFwCfgSelectItem (
+ IN FIRMWARE_CONFIG_ITEM QemuFwCfgItem
+ )
+{
+ UINTN FwCfgSelectorAddress;
+
+ FwCfgSelectorAddress = QemuGetFwCfgSelectorAddress ();
+ MmioWrite16 (FwCfgSelectorAddress, SwapBytes16 ((UINT16)(UINTN)QemuFwCfgItem));
+}
+
+/**
+ Slow READ_BYTES_FUNCTION.
+
+ @param[in] The size of the data to be read.
+ @param[in] Buffer The buffer that stores the readout data.
+**/
+VOID
+EFIAPI
+MmioReadBytes (
+ IN UINTN Size,
+ IN VOID *Buffer OPTIONAL
+ )
+{
+ UINTN Left;
+ UINT8 *Ptr;
+ UINT8 *End;
+ UINTN FwCfgDataAddress;
+
+ Left = Size & 7;
+
+ Size -= Left;
+ Ptr = Buffer;
+ End = Ptr + Size;
+
+ FwCfgDataAddress = QemuGetFwCfgDataAddress ();
+ while (Ptr < End) {
+ *(UINT64 *)Ptr = MmioRead64 (FwCfgDataAddress);
+ Ptr += 8;
+ }
+
+ if (Left & 4) {
+ *(UINT32 *)Ptr = MmioRead32 (FwCfgDataAddress);
+ Ptr += 4;
+ }
+
+ if (Left & 2) {
+ *(UINT16 *)Ptr = MmioRead16 (FwCfgDataAddress);
+ Ptr += 2;
+ }
+
+ if (Left & 1) {
+ *Ptr = MmioRead8 (FwCfgDataAddress);
+ }
+}
+
+/**
+ Slow WRITE_BYTES_FUNCTION.
+
+ @param[in] The size of the data to be write.
+ @param[in] Buffer The buffer that stores the writein data.
+**/
+VOID
+EFIAPI
+MmioWriteBytes (
+ IN UINTN Size,
+ IN VOID *Buffer OPTIONAL
+ )
+{
+ UINTN Idx;
+ UINTN FwCfgDataAddress;
+
+ FwCfgDataAddress = QemuGetFwCfgDataAddress ();
+ for (Idx = 0; Idx < Size; ++Idx) {
+ MmioWrite8 (FwCfgDataAddress, ((UINT8 *)Buffer)[Idx]);
+ }
+}
+
+/**
+ Reads firmware configuration bytes into a buffer
+
+ @param[in] Size - Size in bytes to read
+ @param[in] Buffer - Buffer to store data into (OPTIONAL if Size is 0)
+**/
+VOID
+EFIAPI
+InternalQemuFwCfgReadBytes (
+ IN UINTN Size,
+ IN VOID *Buffer OPTIONAL
+ )
+{
+ if ((InternalQemuFwCfgDmaIsAvailable ()) &&
+ (Size <= MAX_UINT32))
+ {
+ InternalQemuFwCfgDmaBytes ((UINT32)Size, Buffer, FW_CFG_DMA_CTL_READ);
+ return;
+ }
+
+ MmioReadBytes (Size, Buffer);
+}
+
+/**
+ Reads firmware configuration bytes into a buffer
+
+ If called multiple times, then the data read will
+ continue at the offset of the firmware configuration
+ item where the previous read ended.
+
+ @param[in] Size - Size in bytes to read
+ @param[in] Buffer - Buffer to store data into
+**/
+VOID
+EFIAPI
+QemuFwCfgReadBytes (
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ if (InternalQemuFwCfgIsAvailable ()) {
+ InternalQemuFwCfgReadBytes (Size, Buffer);
+ } else {
+ ZeroMem (Buffer, Size);
+ }
+}
+
+/**
+ Write firmware configuration bytes from a buffer
+
+ If called multiple times, then the data written will
+ continue at the offset of the firmware configuration
+ item where the previous write ended.
+
+ @param[in] Size - Size in bytes to write
+ @param[in] Buffer - Buffer to read data from
+**/
+VOID
+EFIAPI
+QemuFwCfgWriteBytes (
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ if (InternalQemuFwCfgIsAvailable ()) {
+ if ((InternalQemuFwCfgDmaIsAvailable ()) &&
+ (Size <= MAX_UINT32))
+ {
+ InternalQemuFwCfgDmaBytes ((UINT32)Size, Buffer, FW_CFG_DMA_CTL_WRITE);
+ return;
+ }
+
+ MmioWriteBytes (Size, Buffer);
+ }
+}
+
+/**
+ Skip bytes in the firmware configuration item.
+
+ Increase the offset of the firmware configuration item without transferring
+ bytes between the item and a caller-provided buffer. Subsequent read, write
+ or skip operations will commence at the increased offset.
+
+ @param[in] Size Number of bytes to skip.
+**/
+VOID
+EFIAPI
+QemuFwCfgSkipBytes (
+ IN UINTN Size
+ )
+{
+ UINTN ChunkSize;
+ UINT8 SkipBuffer[256];
+
+ if (!InternalQemuFwCfgIsAvailable ()) {
+ return;
+ }
+
+ if ((InternalQemuFwCfgDmaIsAvailable ()) &&
+ (Size <= MAX_UINT32))
+ {
+ InternalQemuFwCfgDmaBytes ((UINT32)Size, NULL, FW_CFG_DMA_CTL_SKIP);
+ return;
+ }
+
+ //
+ // Emulate the skip by reading data in chunks, and throwing it away. The
+ // implementation below is suitable even for phases where RAM or dynamic
+ // allocation is not available or appropriate. It also doesn't affect the
+ // static data footprint for client modules. Large skips are not expected,
+ // therefore this fallback is not performance critical. The size of
+ // SkipBuffer is thought not to exert a large pressure on the stack in any
+ // phase.
+ //
+ while (Size > 0) {
+ ChunkSize = MIN (Size, sizeof SkipBuffer);
+ MmioReadBytes (ChunkSize, SkipBuffer);
+ Size -= ChunkSize;
+ }
+}
+
+/**
+ Reads a UINT8 firmware configuration value
+
+ @return Value of Firmware Configuration item read
+**/
+UINT8
+EFIAPI
+QemuFwCfgRead8 (
+ VOID
+ )
+{
+ UINT8 Result;
+
+ QemuFwCfgReadBytes (sizeof (Result), &Result);
+
+ return Result;
+}
+
+/**
+ Reads a UINT16 firmware configuration value
+
+ @return Value of Firmware Configuration item read
+**/
+UINT16
+EFIAPI
+QemuFwCfgRead16 (
+ VOID
+ )
+{
+ UINT16 Result;
+
+ QemuFwCfgReadBytes (sizeof (Result), &Result);
+
+ return Result;
+}
+
+/**
+ Reads a UINT32 firmware configuration value
+
+ @return Value of Firmware Configuration item read
+**/
+UINT32
+EFIAPI
+QemuFwCfgRead32 (
+ VOID
+ )
+{
+ UINT32 Result;
+
+ QemuFwCfgReadBytes (sizeof (Result), &Result);
+
+ return Result;
+}
+
+/**
+ Reads a UINT64 firmware configuration value
+
+ @return Value of Firmware Configuration item read
+**/
+UINT64
+EFIAPI
+QemuFwCfgRead64 (
+ VOID
+ )
+{
+ UINT64 Result;
+
+ QemuFwCfgReadBytes (sizeof (Result), &Result);
+
+ return Result;
+}
+
+/**
+ Find the configuration item corresponding to the firmware configuration file.
+
+ @param[in] Name - Name of file to look up.
+ @param[out] Item - Configuration item corresponding to the file, to be passed
+ to QemuFwCfgSelectItem ().
+ @param[out] Size - Number of bytes in the file.
+
+ @return RETURN_SUCCESS If file is found.
+ RETURN_NOT_FOUND If file is not found.
+ RETURN_UNSUPPORTED If firmware configuration is unavailable.
+**/
+RETURN_STATUS
+EFIAPI
+QemuFwCfgFindFile (
+ IN CONST CHAR8 *Name,
+ OUT FIRMWARE_CONFIG_ITEM *Item,
+ OUT UINTN *Size
+ )
+{
+ UINT32 Count;
+ UINT32 Idx;
+
+ if (!InternalQemuFwCfgIsAvailable ()) {
+ return RETURN_UNSUPPORTED;
+ }
+
+ QemuFwCfgSelectItem (QemuFwCfgItemFileDir);
+ Count = SwapBytes32 (QemuFwCfgRead32 ());
+
+ for (Idx = 0; Idx < Count; ++Idx) {
+ UINT32 FileSize;
+ UINT16 FileSelect;
+ CHAR8 FileName[QEMU_FW_CFG_FNAME_SIZE];
+
+ FileSize = QemuFwCfgRead32 ();
+ FileSelect = QemuFwCfgRead16 ();
+ QemuFwCfgRead16 (); // skip the field called "reserved"
+ InternalQemuFwCfgReadBytes (sizeof (FileName), FileName);
+
+ if (AsciiStrCmp (Name, FileName) == 0) {
+ *Item = SwapBytes16 (FileSelect);
+ *Size = SwapBytes32 (FileSize);
+ return RETURN_SUCCESS;
+ }
+ }
+
+ return RETURN_NOT_FOUND;
+}
+
+/**
+ firmware config initialize.
+
+ @param VOID
+
+ @return RETURN_SUCCESS Initialization succeeded.
+**/
+RETURN_STATUS
+EFIAPI
+FdtQemuFwCfgInitialize (
+ VOID
+ )
+{
+ VOID *DeviceTreeBase;
+ INT32 Node;
+ INT32 Prev;
+ CONST CHAR8 *Type;
+ INT32 Len;
+ CONST UINT64 *RegProp;
+ UINT64 FwCfgSelectorAddress;
+ UINT64 FwCfgDataAddress;
+ UINT64 FwCfgDataSize;
+
+ DeviceTreeBase = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ ASSERT (DeviceTreeBase != NULL);
+ //
+ // Make sure we have a valid device tree blob
+ //
+ ASSERT (fdt_check_header (DeviceTreeBase) == 0);
+
+ for (Prev = 0; ; Prev = Node) {
+ Node = fdt_next_node (DeviceTreeBase, Prev, NULL);
+ if (Node < 0) {
+ break;
+ }
+
+ //
+ // Check for memory node
+ //
+ Type = fdt_getprop (DeviceTreeBase, Node, "compatible", &Len);
+ if ((Type) &&
+ (AsciiStrnCmp (Type, "qemu,fw-cfg-mmio", Len) == 0))
+ {
+ //
+ // Get the 'reg' property of this node. For now, we will assume
+ // two 8 byte quantities for base and size, respectively.
+ //
+ RegProp = fdt_getprop (DeviceTreeBase, Node, "reg", &Len);
+ if ((RegProp != 0) &&
+ (Len == (2 * sizeof (UINT64))))
+ {
+ FwCfgDataAddress = SwapBytes64 (RegProp[0]);
+ FwCfgDataSize = 8;
+ FwCfgSelectorAddress = FwCfgDataAddress + FwCfgDataSize;
+
+ mFwCfgSelectorAddress = FwCfgSelectorAddress;
+ mFwCfgDataAddress = FwCfgDataAddress;
+
+ BuildGuidDataHob (
+ &mFwCfgSelectorAddressGuid,
+ (VOID *)&FwCfgSelectorAddress,
+ sizeof (UINT64)
+ );
+
+ BuildGuidDataHob (
+ &mFwCfgDataAddressGuid,
+ (VOID *)&FwCfgDataAddress,
+ sizeof (UINT64)
+ );
+ break;
+ } else {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Failed to parse FDT QemuCfg node\n",
+ __FUNCTION__
+ ));
+ break;
+ }
+ }
+ }
+
+ return RETURN_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf
new file mode 100644
index 0000000000..4c9d4bcd81
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf
@@ -0,0 +1,42 @@
+## @file
+# initialized fw_cfg library.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = FdtQemuFwCfgPeiLib
+ FILE_GUID = cdf9a9d5-7422-4dcb-b41d-607151ad320b
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = FtdQemuFwCfgLib|PEIM
+ CONSTRUCTOR = FdtQemuFwCfgInitialize
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ FdtQemuFwCfgPeiLib.c
+ QemuFwCfgPei.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ HobLib
+ DebugLib
+ IoLib
+ MemoryAllocationLib
+ FdtLib
+
+[Pcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
diff --git a/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgLibInternal.h b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgLibInternal.h
new file mode 100644
index 0000000000..17866cb9d5
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgLibInternal.h
@@ -0,0 +1,73 @@
+/** @file
+ fw_cfg library implementation.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - FwCfg - firmWare Configure
+**/
+
+#ifndef QEMU_FW_CFG_LIB_INTERNAL_H_
+#define QEMU_FW_CFG_LIB_INTERNAL_H_
+
+#define FW_CONFIG_SELECTOR_ADDRESS_HOB_GUID \
+ { \
+ 0x3cc47b04, 0x0d3e, 0xaa64, { 0x06, 0xa6, 0x4b, 0xdc, 0x9a, 0x2c, 0x61, 0x19 } \
+ }
+
+#define FW_CONFIG_DATA_ADDRESS_HOB_GUID \
+ { \
+ 0xef854788, 0x10f3, 0x8e7a, { 0x3e, 0xd0, 0x4d, 0x16, 0xc1, 0x79, 0x55, 0x2f } \
+ }
+
+/**
+ Returns a boolean indicating if the firmware configuration interface is
+ available for library-internal purposes.
+
+ This function never changes fw_cfg state.
+
+ @retval TRUE The interface is available internally.
+ @retval FALSE The interface is not available internally.
+**/
+BOOLEAN
+InternalQemuFwCfgIsAvailable (
+ VOID
+ );
+
+/**
+ Returns a boolean indicating whether QEMU provides the DMA-like access method
+ for fw_cfg.
+
+ @retval TRUE The DMA-like access method is available.
+ @retval FALSE The DMA-like access method is unavailable.
+**/
+BOOLEAN
+InternalQemuFwCfgDmaIsAvailable (
+ VOID
+ );
+
+/**
+ Transfer an array of bytes, or skip a number of bytes, using the DMA
+ interface.
+
+ @param[in] Size Size in bytes to transfer or skip.
+
+ @param[in,out] Buffer Buffer to read data into or write data from. Ignored,
+ and may be NULL, if Size is zero, or Control is
+ FW_CFG_DMA_CTL_SKIP.
+
+ @param[in] Control One of the following:
+ FW_CFG_DMA_CTL_WRITE - write to fw_cfg from Buffer.
+ FW_CFG_DMA_CTL_READ - read from fw_cfg into Buffer.
+ FW_CFG_DMA_CTL_SKIP - skip bytes in fw_cfg.
+**/
+VOID
+InternalQemuFwCfgDmaBytes (
+ IN UINT32 Size,
+ IN OUT VOID *Buffer OPTIONAL,
+ IN UINT32 Control
+ );
+
+#endif // QEMU_FW_CFG_LIB_INTERNAL_H_
diff --git a/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgPei.c b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgPei.c
new file mode 100644
index 0000000000..07dc3d1c23
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/QemuFwCfgPei.c
@@ -0,0 +1,117 @@
+/** @file
+ fw_cfg library implementation.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - FwCfg - firmWare Configure
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/QemuFwCfgLib.h>
+
+#include "QemuFwCfgLibInternal.h"
+
+/**
+ Returns a boolean indicating if the firmware configuration interface
+ is available or not.
+
+ This function may change fw_cfg state.
+
+ @retval TRUE The interface is available
+ @retval FALSE The interface is not available
+**/
+BOOLEAN
+EFIAPI
+QemuFwCfgIsAvailable (
+ VOID
+ )
+{
+ UINT32 Signature;
+ UINT32 Revision;
+
+ QemuFwCfgSelectItem (QemuFwCfgItemSignature);
+ Signature = QemuFwCfgRead32 ();
+ DEBUG ((DEBUG_INFO, "FW CFG Signature: 0x%x\n", Signature));
+ QemuFwCfgSelectItem (QemuFwCfgItemInterfaceVersion);
+ Revision = QemuFwCfgRead32 ();
+ DEBUG ((DEBUG_INFO, "FW CFG Revision: 0x%x\n", Revision));
+ if ((Signature != SIGNATURE_32 ('Q', 'E', 'M', 'U')) ||
+ (Revision < 1))
+ {
+ DEBUG ((DEBUG_INFO, "QemuFwCfg interface not supported.\n"));
+ return FALSE;
+ }
+
+ DEBUG ((DEBUG_INFO, "QemuFwCfg interface is supported.\n"));
+ return TRUE;
+}
+
+/**
+ Returns a boolean indicating if the firmware configuration interface is
+ available for library-internal purposes.
+
+ This function never changes fw_cfg state.
+
+ @retval TRUE The interface is available internally.
+ @retval FALSE The interface is not available internally.
+**/
+BOOLEAN
+InternalQemuFwCfgIsAvailable (
+ VOID
+ )
+{
+ //
+ // We always return TRUE, because the consumer of this library ought to have
+ // called QemuFwCfgIsAvailable before making other calls which would hit this
+ // path.
+ //
+ return TRUE;
+}
+
+/**
+ Returns a boolean indicating whether QEMU provides the DMA-like access method
+ for fw_cfg.
+
+ @retval TRUE The DMA-like access method is available.
+ @retval FALSE The DMA-like access method is unavailable.
+**/
+BOOLEAN
+InternalQemuFwCfgDmaIsAvailable (
+ VOID
+ )
+{
+ return FALSE;
+}
+
+/**
+ Transfer an array of bytes, or skip a number of bytes, using the DMA
+ interface.
+
+ @param[in] Size Size in bytes to transfer or skip.
+
+ @param[in, out] Buffer Buffer to read data into or write data from. Ignored,
+ and may be NULL, if Size is zero, or Control is
+ FW_CFG_DMA_CTL_SKIP.
+
+ @param[in] Control One of the following:
+ FW_CFG_DMA_CTL_WRITE - write to fw_cfg from Buffer.
+ FW_CFG_DMA_CTL_READ - read from fw_cfg into Buffer.
+ FW_CFG_DMA_CTL_SKIP - skip bytes in fw_cfg.
+**/
+VOID
+InternalQemuFwCfgDmaBytes (
+ IN UINT32 Size,
+ IN OUT VOID *Buffer OPTIONAL,
+ IN UINT32 Control
+ )
+{
+ //
+ // We should never reach here
+ //
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+}
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110729): https://edk2.groups.io/g/devel/message/110729
Mute This Topic: https://groups.io/mt/102413904/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 26/30] OvmfPkg/LoongArchVirt: Add reset system library
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (24 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 25/30] OvmfPkg/LoongArchVirt: Add FdtQemuFwCfgLib Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 27/30] OvmfPkg/LoongArchVirt: Support SEC phase Chao Li
` (6 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
This library provides interface related to restart and shudown the
LoongArch64 virtual machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
.../BaseResetSystemAcpiGed.c | 148 ++++++++++
.../BaseResetSystemAcpiGedLib.inf | 37 +++
.../DxeResetSystemAcpiGed.c | 259 ++++++++++++++++++
.../DxeResetSystemAcpiGedLib.inf | 41 +++
.../ResetSystemAcpiLib/ResetSystemAcpiGed.c | 128 +++++++++
.../ResetSystemAcpiLib/ResetSystemAcpiGed.h | 23 ++
6 files changed, 636 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGed.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGed.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.c
create mode 100644 OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.h
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGed.c b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGed.c
new file mode 100644
index 0000000000..adb66f365a
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGed.c
@@ -0,0 +1,148 @@
+/** @file
+ Base ResetSystem library implementation.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include "ResetSystemAcpiGed.h"
+#include <Library/QemuFwCfgLib.h>
+
+/**
+ Get configuration item data by the firmware configuration file name.
+
+ @param[in] Name - Name of file to look up.
+
+ @return VOID* The Pointer of Value of Firmware Configuration item read.
+**/
+VOID *
+GetFwCfgData (
+ CONST CHAR8 *Name
+ )
+{
+ FIRMWARE_CONFIG_ITEM FwCfgItem;
+ EFI_STATUS Status;
+ UINTN FwCfgSize;
+ VOID *Data;
+
+ Status = QemuFwCfgFindFile (Name, &FwCfgItem, &FwCfgSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a %d read %s error Status %d \n", __func__, __LINE__, Name, Status));
+ return NULL;
+ }
+
+ Data = AllocatePool (FwCfgSize);
+ if (Data == NULL) {
+ return NULL;
+ }
+
+ QemuFwCfgSelectItem (FwCfgItem);
+ QemuFwCfgReadBytes (FwCfgSize, Data);
+
+ return Data;
+}
+
+/**
+ Find the power manager related info from ACPI table
+
+ @retval RETURN_SUCCESS Successfully find out all the required information.
+ @retval RETURN_NOT_FOUND Failed to find the required info.
+**/
+STATIC EFI_STATUS
+GetPowerManagerByParseAcpiInfo (
+ VOID
+ )
+{
+ EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *Fadt = NULL;
+ EFI_ACPI_3_0_ROOT_SYSTEM_DESCRIPTION_POINTER *Rsdp = NULL;
+ EFI_ACPI_DESCRIPTION_HEADER *Xsdt = NULL;
+ EFI_ACPI_DESCRIPTION_HEADER *Rsdt = NULL;
+ VOID *AcpiTables = NULL;
+ UINT32 *Entry32 = NULL;
+ UINTN Entry32Num;
+ UINT32 *Signature = NULL;
+ UINTN Idx;
+
+ Rsdp = GetFwCfgData ("etc/acpi/rsdp");
+ if (Rsdp == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a %d read etc/acpi/rsdp error \n", __func__, __LINE__));
+ return RETURN_NOT_FOUND;
+ }
+
+ AcpiTables = GetFwCfgData ("etc/acpi/tables");
+ if (AcpiTables == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a %d read etc/acpi/tables error \n", __func__, __LINE__));
+ FreePool (Rsdp);
+ return RETURN_NOT_FOUND;
+ }
+
+ Rsdt = (EFI_ACPI_DESCRIPTION_HEADER *)((UINTN)AcpiTables + Rsdp->RsdtAddress);
+ Entry32 = (UINT32 *)(Rsdt + 1);
+ Entry32Num = (Rsdt->Length - sizeof (EFI_ACPI_DESCRIPTION_HEADER)) >> 2;
+ for (Idx = 0; Idx < Entry32Num; Idx++) {
+ Signature = (UINT32 *)((UINTN)Entry32[Idx] + (UINTN)AcpiTables);
+ if (*Signature == EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) {
+ Fadt = (EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *)Signature;
+ DEBUG ((DEBUG_INFO, "Found Fadt in Rsdt\n"));
+ goto Done;
+ }
+ }
+
+ Xsdt = (EFI_ACPI_DESCRIPTION_HEADER *)((UINTN)AcpiTables + Rsdp->XsdtAddress);
+ Entry32 = (UINT32 *)(Xsdt + 1);
+ Entry32Num = (Xsdt->Length - sizeof (EFI_ACPI_DESCRIPTION_HEADER)) >> 2;
+ for (Idx = 0; Idx < Entry32Num; Idx++) {
+ Signature = (UINT32 *)((UINTN)Entry32[Idx] + (UINTN)AcpiTables);
+ if (*Signature == EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) {
+ Fadt = (EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *)Signature;
+ DEBUG ((DEBUG_INFO, "Found Fadt in Xsdt\n"));
+ goto Done;
+ }
+ }
+
+ FreePool (Rsdp);
+ FreePool (AcpiTables);
+ DEBUG ((DEBUG_ERROR, " Fadt Not Found\n"));
+ return RETURN_NOT_FOUND;
+
+Done:
+ mPowerManager.ResetRegAddr = Fadt->ResetReg.Address;
+ mPowerManager.ResetValue = Fadt->ResetValue;
+ mPowerManager.SleepControlRegAddr = Fadt->SleepControlReg.Address;
+ mPowerManager.SleepStatusRegAddr = Fadt->SleepStatusReg.Address;
+
+ FreePool (Rsdp);
+ FreePool (AcpiTables);
+ return RETURN_SUCCESS;
+}
+
+/**
+ The constructor function to initialize mPowerManager.
+
+ @retval EFI_SUCCESS initialize mPowerManager success.
+ @retval RETURN_NOT_FOUND Failed to initialize mPowerManager.
+**/
+EFI_STATUS
+ResetSystemLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = GetPowerManagerByParseAcpiInfo ();
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d\n", __FUNCTION__, __LINE__));
+ }
+
+ ASSERT (mPowerManager.SleepControlRegAddr);
+ ASSERT (mPowerManager.SleepStatusRegAddr);
+ ASSERT (mPowerManager.ResetRegAddr);
+ return Status;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf
new file mode 100644
index 0000000000..7027a688ee
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf
@@ -0,0 +1,37 @@
+## @file
+# Base library instance for ResetSystem library class for LoongArch
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 1.29
+ BASE_NAME = ResetSystemLib
+ FILE_GUID = BA521997-9016-32B5-65DF-EA5F560A3837
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ResetSystemLib|SEC PEI_CORE PEIM DXE_CORE
+ CONSTRUCTOR = ResetSystemLibConstructor
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ BaseResetSystemAcpiGed.c
+ ResetSystemAcpiGed.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ QemuFwCfgLib
+ MemoryAllocationLib
+ IoLib
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGed.c b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGed.c
new file mode 100644
index 0000000000..3fbb4046b5
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGed.c
@@ -0,0 +1,259 @@
+/** @file
+ Dxe ResetSystem library implementation.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiRuntimeLib.h> // EfiConvertPointer()
+#include <Library/DxeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include "ResetSystemAcpiGed.h"
+#include <Library/UefiLib.h>
+
+/**
+ Modifies the attributes to Runtime type for a page size memory region.
+
+ @param BaseAddress Specified start address
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_UNSUPPORTED The processor does not support one or more bytes of the memory
+ resource range specified by BaseAddress and Length.
+ @retval EFI_UNSUPPORTED The bit mask of attributes is not support for the memory resource
+ range specified by BaseAddress and Length.
+ @retval EFI_ACCESS_DEFINED The attributes for the memory resource range specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to modify the attributes of
+ the memory resource range.
+ @retval EFI_NOT_AVAILABLE_YET The attributes cannot be set because CPU architectural protocol is
+ not available yet.
+**/
+EFI_STATUS
+SetMemoryAttributesRunTime (
+ UINTN Address
+ )
+{
+ EFI_STATUS Status;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
+
+ Address &= ~EFI_PAGE_MASK;
+
+ Status = gDS->GetMemorySpaceDescriptor (Address, &Descriptor);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a: GetMemorySpaceDescriptor failed\n", __FUNCTION__));
+ return Status;
+ }
+
+ if (Descriptor.GcdMemoryType == EfiGcdMemoryTypeNonExistent) {
+ Status = gDS->AddMemorySpace (
+ EfiGcdMemoryTypeMemoryMappedIo,
+ Address,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a: AddMemorySpace failed\n", __FUNCTION__));
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ Address,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d SetMemorySpaceAttributes failed\n", __FUNCTION__, __LINE__));
+ return Status;
+ }
+ } else if (!(Descriptor.Attributes & EFI_MEMORY_RUNTIME)) {
+ Status = gDS->SetMemorySpaceAttributes (
+ Address,
+ EFI_PAGE_SIZE,
+ Descriptor.Attributes | EFI_MEMORY_RUNTIME
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d SetMemorySpaceAttributes failed\n", __FUNCTION__, __LINE__));
+ return Status;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Find the power manager related info from ACPI table
+
+ @retval RETURN_SUCCESS Successfully find out all the required information.
+ @retval RETURN_NOT_FOUND Failed to find the required info.
+**/
+STATIC EFI_STATUS
+GetPowerManagerByParseAcpiInfo (
+ VOID
+ )
+{
+ EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *Fadt = NULL;
+ EFI_ACPI_3_0_ROOT_SYSTEM_DESCRIPTION_POINTER *Rsdp = NULL;
+ EFI_ACPI_DESCRIPTION_HEADER *Xsdt = NULL;
+ EFI_ACPI_DESCRIPTION_HEADER *Rsdt = NULL;
+ UINT32 *Entry32 = NULL;
+ UINTN Entry32Num;
+ UINT32 *Signature = NULL;
+ UINTN Idx;
+ EFI_STATUS Status;
+
+ Status = EfiGetSystemConfigurationTable (&gEfiAcpiTableGuid, (VOID **)&Rsdp);
+ if (EFI_ERROR (Status)) {
+ Status = EfiGetSystemConfigurationTable (&gEfiAcpi10TableGuid, (VOID **)&Rsdp);
+ }
+
+ if (EFI_ERROR (Status) || (Rsdp == NULL)) {
+ DEBUG ((DEBUG_ERROR, "EFI_ERROR or Rsdp == NULL\n"));
+ return RETURN_NOT_FOUND;
+ }
+
+ Rsdt = (EFI_ACPI_DESCRIPTION_HEADER *)(UINTN)Rsdp->RsdtAddress;
+ Entry32 = (UINT32 *)(UINTN)(Rsdt + 1);
+ Entry32Num = (Rsdt->Length - sizeof (EFI_ACPI_DESCRIPTION_HEADER)) >> 2;
+ for (Idx = 0; Idx < Entry32Num; Idx++) {
+ Signature = (UINT32 *)(UINTN)Entry32[Idx];
+ if (*Signature == EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) {
+ Fadt = (EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *)Signature;
+ DEBUG ((DEBUG_INFO, "Found Fadt in Rsdt\n"));
+ goto Done;
+ }
+ }
+
+ Xsdt = (EFI_ACPI_DESCRIPTION_HEADER *)Rsdp->XsdtAddress;
+ Entry32 = (UINT32 *)(Xsdt + 1);
+ Entry32Num = (Xsdt->Length - sizeof (EFI_ACPI_DESCRIPTION_HEADER)) >> 2;
+ for (Idx = 0; Idx < Entry32Num; Idx++) {
+ Signature = (UINT32 *)(UINTN)Entry32[Idx];
+ if (*Signature == EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) {
+ Fadt = (EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE *)Signature;
+ DEBUG ((DEBUG_INFO, "Found Fadt in Xsdt\n"));
+ goto Done;
+ }
+ }
+
+ DEBUG ((DEBUG_ERROR, " Fadt Not Found\n"));
+ return RETURN_NOT_FOUND;
+
+Done:
+ mPowerManager.ResetRegAddr = Fadt->ResetReg.Address;
+ mPowerManager.ResetValue = Fadt->ResetValue;
+ mPowerManager.SleepControlRegAddr = Fadt->SleepControlReg.Address;
+ mPowerManager.SleepStatusRegAddr = Fadt->SleepStatusReg.Address;
+ return RETURN_SUCCESS;
+}
+
+/**
+ This is a notification function registered on EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
+ event. It converts a pointer to a new virtual address.
+
+ @param[in] Event Event whose notification function is being invoked.
+ @param[in] Context Pointer to the notification function's context
+**/
+VOID
+EFIAPI
+ResetSystemLibAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EfiConvertPointer (0, (VOID **)&mPowerManager.SleepControlRegAddr);
+ EfiConvertPointer (0, (VOID **)&mPowerManager.SleepStatusRegAddr);
+ EfiConvertPointer (0, (VOID **)&mPowerManager.ResetRegAddr);
+}
+
+/**
+ Notification function of ACPI Table change.
+
+ This is a notification function registered on ACPI Table change event.
+ It saves the Century address stored in ACPI FADT table.
+
+ @param Event Event whose notification function is being invoked.
+ @param Context Pointer to the notification function's context.
+**/
+STATIC VOID
+AcpiNotificationEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+
+ Status = GetPowerManagerByParseAcpiInfo ();
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a: sleepControl %llx\n", __FUNCTION__, mPowerManager.SleepControlRegAddr));
+ ASSERT (mPowerManager.SleepControlRegAddr);
+ Status = SetMemoryAttributesRunTime (mPowerManager.SleepControlRegAddr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d\n", __FUNCTION__, __LINE__));
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a: sleepStatus %llx\n", __FUNCTION__, mPowerManager.SleepStatusRegAddr));
+ ASSERT (mPowerManager.SleepStatusRegAddr);
+ Status = SetMemoryAttributesRunTime (mPowerManager.SleepStatusRegAddr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d\n", __FUNCTION__, __LINE__));
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a: ResetReg %llx\n", __FUNCTION__, mPowerManager.ResetRegAddr));
+ ASSERT (mPowerManager.ResetRegAddr);
+ Status = SetMemoryAttributesRunTime (mPowerManager.ResetRegAddr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a:%d\n", __FUNCTION__, __LINE__));
+ }
+
+ return;
+}
+
+/**
+ The constructor function to Register ACPI Table change event and Address Change Event.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+**/
+EFI_STATUS
+EFIAPI
+ResetSystemLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT Event;
+ EFI_EVENT ResetSystemVirtualNotifyEvent;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ AcpiNotificationEvent,
+ NULL,
+ &gEfiAcpiTableGuid,
+ &Event
+ );
+
+ //
+ // Register SetVirtualAddressMap () notify function
+ //
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE,
+ TPL_NOTIFY,
+ ResetSystemLibAddressChangeEvent,
+ NULL,
+ &ResetSystemVirtualNotifyEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf
new file mode 100644
index 0000000000..e54ae5e0b8
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf
@@ -0,0 +1,41 @@
+## @file
+# DXE library instance for ResetSystem library class for LoongArch.
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 1.29
+ BASE_NAME = ResetSystemLib
+ FILE_GUID = F05197D5-5827-AA61-FB2D-BC69259F17A9
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ResetSystemLib|DXE_DRIVER DXE_RUNTIME_DRIVER SMM_CORE DXE_SMM_DRIVER UEFI_DRIVER UEFI_APPLICATION
+ CONSTRUCTOR = ResetSystemLibConstructor
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ DxeResetSystemAcpiGed.c
+ ResetSystemAcpiGed.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ DxeServicesTableLib
+ IoLib
+ UefiLib
+
+[Guids]
+ gEfiAcpi10TableGuid ## PRODUCES ## SystemTable
+ gEfiAcpiTableGuid ## PRODUCES ## SystemTable
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.c b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.c
new file mode 100644
index 0000000000..d9283cecd5
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.c
@@ -0,0 +1,128 @@
+/** @file
+ ResetSystem library implementation.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+#include <PiPei.h>
+#include <Library/BaseLib.h> // CpuDeadLoop()
+#include <Library/DebugLib.h>
+#include <Library/ResetSystemLib.h> // ResetCold()
+#include <Library/IoLib.h>
+#include "ResetSystemAcpiGed.h"
+
+POWER_MANAGER mPowerManager;
+
+/**
+ Calling this function causes a system-wide reset. This sets
+ all circuitry within the system to its initial state. This type of reset
+ is asynchronous to system operation and operates without regard to
+ cycle boundaries.
+
+ System reset should not return, if it returns, it means the system does
+ not support cold reset.
+**/
+STATIC VOID
+AcpiGedReset (
+ VOID
+ )
+{
+ MmioWrite8 (
+ (UINTN)mPowerManager.ResetRegAddr,
+ mPowerManager.ResetValue
+ );
+
+ CpuDeadLoop ();
+}
+
+/**
+ This function causes the system to enter a power state equivalent
+ to the ACPI S5 states.
+
+ * */
+STATIC VOID
+AcpiGedShutdown (
+ VOID
+ )
+{
+ MmioWrite8 (
+ (UINTN)mPowerManager.SleepControlRegAddr,
+ (1 << 5) /* enable bit */ |
+ (5 << 2) /* typ == S5 */
+ );
+
+ CpuDeadLoop ();
+}
+
+/**
+ This function causes a system-wide reset (cold reset), in which
+ all circuitry within the system returns to its initial state. This type of
+ reset is asynchronous to system operation and operates without regard to
+ cycle boundaries.
+
+ If this function returns, it means that the system does not support cold
+ reset.
+**/
+VOID EFIAPI
+ResetCold (
+ VOID
+ )
+{
+ AcpiGedReset ();
+}
+
+/**
+ This function causes a system-wide initialization (warm reset), in which all
+ processors are set to their initial state. Pending cycles are not corrupted.
+
+ If this function returns, it means that the system does not support warm
+ reset.
+**/
+VOID EFIAPI
+ResetWarm (
+ VOID
+ )
+{
+ AcpiGedReset ();
+}
+
+/**
+ This function causes a systemwide reset. The exact type of the reset is
+ defined by the EFI_GUID that follows the Null-terminated Unicode string passed
+ into ResetData. If the platform does not recognize the EFI_GUID in ResetData
+ the platform must pick a supported reset type to perform.The platform may
+ optionally log the parameters from any non-normal reset that occurs.
+
+ @param[in] DataSize The size, in bytes, of ResetData.
+ @param[in] ResetData The data buffer starts with a Null-terminated string,
+ followed by the EFI_GUID.
+**/
+VOID
+EFIAPI
+ResetPlatformSpecific (
+ IN UINTN DataSize,
+ IN VOID *ResetData
+ )
+{
+ AcpiGedReset ();
+}
+
+/**
+ This function causes the system to enter a power state equivalent
+ to the ACPI G2/S5 or G3 states.
+
+ If this function returns, it means that the system does not support shut down
+ reset.
+**/
+VOID EFIAPI
+ResetShutdown (
+ VOID
+ )
+{
+ AcpiGedShutdown ();
+}
diff --git a/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.h b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.h
new file mode 100644
index 0000000000..23c722a0f1
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/ResetSystemAcpiGed.h
@@ -0,0 +1,23 @@
+/** @file
+ ResetSystem lib head file.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef RESET_SYSTEM_ACPI_GED_H_
+#define RESET_SYSTEM_ACPI_GED_H_
+
+#include <Base.h>
+
+typedef struct {
+ UINT64 SleepControlRegAddr;
+ UINT64 SleepStatusRegAddr;
+ UINT64 ResetRegAddr;
+ UINT8 ResetValue;
+} POWER_MANAGER;
+
+extern POWER_MANAGER mPowerManager;
+#endif // RESET_SYSTEM_ACPI_GED_H_
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110730): https://edk2.groups.io/g/devel/message/110730
Mute This Topic: https://groups.io/mt/102413908/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 27/30] OvmfPkg/LoongArchVirt: Support SEC phase
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (25 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 26/30] OvmfPkg/LoongArchVirt: Add reset system library Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 28/30] OvmfPkg/LoongArchVirt: Support PEI phase Chao Li
` (5 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Add SEC code for LoongArch virtual machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
OvmfPkg/LoongArchVirt/Sec/LoongArch64/Start.S | 176 ++++++
OvmfPkg/LoongArchVirt/Sec/SecMain.c | 507 ++++++++++++++++++
OvmfPkg/LoongArchVirt/Sec/SecMain.inf | 53 ++
3 files changed, 736 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Sec/LoongArch64/Start.S
create mode 100644 OvmfPkg/LoongArchVirt/Sec/SecMain.c
create mode 100644 OvmfPkg/LoongArchVirt/Sec/SecMain.inf
diff --git a/OvmfPkg/LoongArchVirt/Sec/LoongArch64/Start.S b/OvmfPkg/LoongArchVirt/Sec/LoongArch64/Start.S
new file mode 100644
index 0000000000..21cc9f3388
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Sec/LoongArch64/Start.S
@@ -0,0 +1,176 @@
+#------------------------------------------------------------------------------
+#
+# Start for Loongson LoongArch processor
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+# @par Glossary:
+# - CSR - CPU Status Register
+# - EBASE - Exception Base Address
+#------------------------------------------------------------------------------
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__
+#endif
+
+#include <Library/BaseMemoryLib.h>
+#include <Register/LoongArch64/Csr.h>
+#include <Protocol/DebugSupport.h>
+
+#define BOOTCORE_ID 0
+
+ASM_GLOBAL ASM_PFX(_ModuleEntryPoint)
+ASM_PFX(_ModuleEntryPoint):
+ /* Disable interrupt */
+ li.d $t0, (1 << 2)
+ csrxchg $zero, $t0, LOONGARCH_CSR_CRMD
+
+ /* Read physical cpu number id */
+ bl GetApicId
+ li.d $t0, BOOTCORE_ID //0
+ bne $a0, $t0, SlaveMain
+
+ /* Configure BSP reset ebase */
+ li.d $a0, FixedPcdGet64(PcdCpuExceptionVectorBaseAddress)
+ bl SetExceptionBaseAddress
+ move $t1, $a0
+
+ /* Set BSP stack */
+ li.d $t0, FixedPcdGet64(PcdOvmfSecPeiTempRamBase) + FixedPcdGet32(PcdOvmfSecPeiTempRamSize) # stack base
+ move $sp, $t0
+ addi.d $sp, $sp, -0x8
+
+ /* Construct SEC and PEI step exception environment */
+ la.pcrel $a1, ExceptionEntryStart
+ la.pcrel $t0, ExceptionEntryEnd
+ sub.d $a2, $t0, $a1
+ li.w $t0, (MAX_LOONGARCH_EXCEPTION + MAX_LOONGARCH_INTERRUPT) * 512
+ bgeu $a2, $t0, DeadLoop
+ move $a0, $t1
+ bl CopyMem
+
+CallEntry:
+ /* Call C function make sure parameter true */
+ li.d $a0, FixedPcdGet64(PcdOvmfFdBaseAddress) # FW base
+ addi.d $a1, $sp, 0x8
+ bl SecCoreStartupWithStack
+# End of _ModuleEntryPoint
+
+ASM_PFX(ClearMailBox):
+ /* Clear mailbox */
+ li.d $t1, LOONGARCH_IOCSR_MBUF3
+ iocsrwr.d $zero, $t1
+ li.d $t1, LOONGARCH_IOCSR_MBUF2
+ iocsrwr.d $zero, $t1
+ li.d $t1, LOONGARCH_IOCSR_MBUF1
+ iocsrwr.d $zero, $t1
+ li.d $t1, LOONGARCH_IOCSR_MBUF0
+ iocsrwr.d $zero, $t1
+ jirl $zero, $ra, 0
+# End of ClearMailBox
+
+ASM_PFX(EnableIPI):
+ /* Enable IPI interrupt */
+ li.d $t1, (1 << 12)
+ csrxchg $t1, $t1, LOONGARCH_CSR_ECFG
+
+ addi.d $t2, $zero, -1
+ li.d $t1, LOONGARCH_IOCSR_IPI_EN
+ iocsrwr.w $t2, $t1
+ jirl $zero, $ra, 0
+# End of EeableIPI
+
+#/**
+# Get APIC ID for every CPU.
+#
+# @param NULL
+# @return APICID
+#
+# UINTN
+# EFI_API
+# GetApicId (
+# VOID
+# )
+#**/
+ASM_PFX(GetApicId):
+ csrrd $a0, LOONGARCH_CSR_CPUNUM
+ andi $a0, $a0, 0x3ff
+ jirl $zero, $ra, 0
+# End of GetApicId
+
+ASM_PFX(ApInitStack):
+ li.d $t1, SIZE_1KB
+ csrrd $t0, LOONGARCH_CSR_TMID
+ mul.d $t1, $t0, $t1
+ li.d $t2, FixedPcdGet32(PcdCpuMaxLogicalProcessorNumber)
+ bgeu $t0, $t2, DeadLoop
+ li.d $t0, FixedPcdGet64(PcdOvmfSecPeiTempRamBase) + FixedPcdGet32(PcdOvmfSecPeiTempRamSize) - SIZE_64KB
+ sub.d $sp, $t0, $t1
+ addi.d $sp, $sp, -0x8
+ jirl $zero, $ra, 0
+# End of ApInitStack
+
+ASM_PFX(SlaveMain):
+ /* Set AP exception handle in flash */
+ la.pcrel $a0, ApException
+ bl SetExceptionBaseAddress
+
+ /* Clean up local mail box and open INT */
+ bl ClearMailBox
+ bl EnableIPI
+ bl EnableInterrupts
+
+WaitForWake:
+ /* Wait for wakeup */
+ bl CpuSleep
+ li.d $t1, LOONGARCH_IOCSR_MBUF0
+ iocsrrd.w $t2, $t1
+ beqz $t2, WaitForWake
+
+ /* Disable global interrupt */
+ bl DisableInterrupts
+
+ /* Disable IPI interrupt */
+ li.d $t0, (1 << 12)
+ csrxchg $zero, $t0, LOONGARCH_CSR_ECFG
+
+ /* Read mail buf and jump to specified entry */
+ li.d $t1, LOONGARCH_IOCSR_MBUF0
+ iocsrrd.d $t0, $t1
+ li.d $t1, LOONGARCH_IOCSR_MBUF3
+ iocsrrd.d $a1, $t1
+ bl ClearMailBox
+ beqz $a1, NoParameterCall
+
+ //
+ // If the parameters are not NULL, then calling happened in FW ENV.
+ // Set the EBASE to be the same as BSP.
+ //
+ li.d $a0, FixedPcdGet64(PcdCpuExceptionVectorBaseAddress)
+ bl SetExceptionBaseAddress
+
+ bl ApInitStack
+ bl GetApicId
+NoParameterCall:
+ move $ra, $t0
+ jirl $zero, $ra, 0x0
+# End of SlaveMain
+
+.align 12
+ASM_PFX(ApException):
+ csrrd $t0, LOONGARCH_CSR_ESTAT
+ srli.d $t0, $t0, 12
+ beqz $t0, DeadLoop
+
+ li.d $t0, LOONGARCH_IOCSR_IPI_STATUS
+ iocsrrd.w $t1, $t0
+ li.d $t0, LOONGARCH_IOCSR_IPI_CLEAR
+ iocsrwr.w $t1, $t0
+ ertn
+# End of ApException
+
+ASM_PFX(DeadLoop):
+ b DeadLoop
+# End of DeadLoop
+.end
diff --git a/OvmfPkg/LoongArchVirt/Sec/SecMain.c b/OvmfPkg/LoongArchVirt/Sec/SecMain.c
new file mode 100644
index 0000000000..417b95407c
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Sec/SecMain.c
@@ -0,0 +1,507 @@
+/** @file
+ Main SEC phase code. Transitions to PEI.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiPei.h>
+
+#include <Library/PeimEntryPoint.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugAgentLib.h>
+#include <Library/IoLib.h>
+#include <Library/PeCoffLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include <Library/PeCoffExtraActionLib.h>
+#include <Library/ExtractGuidedSectionLib.h>
+
+#include <Ppi/TemporaryRamSupport.h>
+
+/**
+ temporary memory to permanent memory and do stack switching.
+
+ @param[in] PeiServices Pointer to the PEI Services Table.
+ @param[in] TemporaryMemoryBase Temporary Memory Base address.
+ @param[in] PermanentMemoryBase Permanent Memory Base address.
+ @param[in] CopySize The size of memory that needs to be migrated.
+
+ @retval EFI_SUCCESS Migration successful.
+**/
+EFI_STATUS
+EFIAPI
+TemporaryRamMigration (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
+ IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
+ IN UINTN CopySize
+ );
+
+EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI mTemporaryRamSupportPpi = {
+ TemporaryRamMigration
+};
+
+EFI_PEI_PPI_DESCRIPTOR mPrivateDispatchTable[] = {
+ {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiTemporaryRamSupportPpiGuid,
+ &mTemporaryRamSupportPpi
+ },
+};
+
+/**
+ Locates a section within a series of sections
+ with the specified section type.
+
+ The Instance parameter indicates which instance of the section
+ type to return. (0 is first instance, 1 is second...)
+
+ @param[in] Sections The sections to search
+ @param[in] SizeOfSections Total size of all sections
+ @param[in] SectionType The section type to locate
+ @param[in] Instance The section instance number
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+**/
+EFI_STATUS
+FindFfsSectionInstance (
+ IN VOID *Sections,
+ IN UINTN SizeOfSections,
+ IN EFI_SECTION_TYPE SectionType,
+ IN UINTN Instance,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ EFI_PHYSICAL_ADDRESS CurrentAddress;
+ UINT32 Size;
+ EFI_PHYSICAL_ADDRESS EndOfSections;
+ EFI_COMMON_SECTION_HEADER *Section;
+ EFI_PHYSICAL_ADDRESS EndOfSection;
+
+ //
+ // Loop through the FFS file sections within the PEI Core FFS file
+ //
+ EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN)Sections;
+ EndOfSections = EndOfSection + SizeOfSections;
+ for ( ; ; ) {
+ if (EndOfSection == EndOfSections) {
+ break;
+ }
+
+ CurrentAddress = (EndOfSection + 3) & ~(3ULL);
+ if (CurrentAddress >= EndOfSections) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ Section = (EFI_COMMON_SECTION_HEADER *)(UINTN)CurrentAddress;
+
+ Size = SECTION_SIZE (Section);
+ if (Size < sizeof (*Section)) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ EndOfSection = CurrentAddress + Size;
+ if (EndOfSection > EndOfSections) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ //
+ // Look for the requested section type
+ //
+ if (Section->Type == SectionType) {
+ if (Instance == 0) {
+ *FoundSection = Section;
+ return EFI_SUCCESS;
+ } else {
+ Instance--;
+ }
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Locates a section within a series of sections
+ with the specified section type.
+
+ @param[in] Sections The sections to search
+ @param[in] SizeOfSections Total size of all sections
+ @param[in] SectionType The section type to locate
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+**/
+EFI_STATUS
+FindFfsSectionInSections (
+ IN VOID *Sections,
+ IN UINTN SizeOfSections,
+ IN EFI_SECTION_TYPE SectionType,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ return FindFfsSectionInstance (
+ Sections,
+ SizeOfSections,
+ SectionType,
+ 0,
+ FoundSection
+ );
+}
+
+/**
+ Locates a FFS file with the specified file type and a section
+ within that file with the specified section type.
+
+ @param[in] Fv The firmware volume to search
+ @param[in] FileType The file type to locate
+ @param[in] SectionType The section type to locate
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+**/
+EFI_STATUS
+FindFfsFileAndSection (
+ IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
+ IN EFI_FV_FILETYPE FileType,
+ IN EFI_SECTION_TYPE SectionType,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS CurrentAddress;
+ EFI_PHYSICAL_ADDRESS EndOfFirmwareVolume;
+ EFI_FFS_FILE_HEADER *File;
+ UINT32 Size;
+ EFI_PHYSICAL_ADDRESS EndOfFile;
+
+ if (Fv->Signature != EFI_FVH_SIGNATURE) {
+ DEBUG ((DEBUG_ERROR, "FV at %p does not have FV header signature\n", Fv));
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ CurrentAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)Fv;
+ EndOfFirmwareVolume = CurrentAddress + Fv->FvLength;
+
+ //
+ // Loop through the FFS files in the Boot Firmware Volume
+ //
+ for (EndOfFile = CurrentAddress + Fv->HeaderLength; ; ) {
+ CurrentAddress = (EndOfFile + 7) & ~(7ULL);
+ if (CurrentAddress > EndOfFirmwareVolume) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ File = (EFI_FFS_FILE_HEADER *)(UINTN)CurrentAddress;
+ Size = *(UINT32 *)File->Size & 0xffffff;
+ if (Size < (sizeof (*File) + sizeof (EFI_COMMON_SECTION_HEADER))) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ EndOfFile = CurrentAddress + Size;
+ if (EndOfFile > EndOfFirmwareVolume) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ //
+ // Look for the request file type
+ //
+ if (File->Type != FileType) {
+ continue;
+ }
+
+ Status = FindFfsSectionInSections (
+ (VOID *)(File + 1),
+ (UINTN)EndOfFile - (UINTN)(File + 1),
+ SectionType,
+ FoundSection
+ );
+ if (!EFI_ERROR (Status) ||
+ (Status == EFI_VOLUME_CORRUPTED))
+ {
+ return Status;
+ }
+ }
+}
+
+/**
+ Locates the PEI Core entry point address
+
+ @param[in] Fv The firmware volume to search
+ @param[out] PeiCoreEntryPoint The entry point of the PEI Core image
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+**/
+EFI_STATUS
+FindPeiCoreImageBaseInFv (
+ IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
+ OUT EFI_PHYSICAL_ADDRESS *PeiCoreImageBase
+ )
+{
+ EFI_STATUS Status;
+ EFI_COMMON_SECTION_HEADER *Section;
+
+ Status = FindFfsFileAndSection (
+ Fv,
+ EFI_FV_FILETYPE_PEI_CORE,
+ EFI_SECTION_PE32,
+ &Section
+ );
+ if (EFI_ERROR (Status)) {
+ Status = FindFfsFileAndSection (
+ Fv,
+ EFI_FV_FILETYPE_PEI_CORE,
+ EFI_SECTION_TE,
+ &Section
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Unable to find PEI Core image\n"));
+ return Status;
+ }
+ }
+
+ *PeiCoreImageBase = (EFI_PHYSICAL_ADDRESS)(UINTN)(Section + 1);
+ return EFI_SUCCESS;
+}
+
+/**
+ Find and return Pei Core entry point.
+
+ It also find SEC and PEI Core file debug information. It will report them if
+ remote debug is enabled.
+**/
+VOID
+FindAndReportEntryPoints (
+ IN EFI_FIRMWARE_VOLUME_HEADER **BootFirmwareVolumePtr,
+ OUT EFI_PEI_CORE_ENTRY_POINT *PeiCoreEntryPoint
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS PeiCoreImageBase = 0;
+ PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
+
+ Status = FindPeiCoreImageBaseInFv (*BootFirmwareVolumePtr, &PeiCoreImageBase);
+ ASSERT (Status == EFI_SUCCESS);
+
+ ZeroMem ((VOID *)&ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT));
+
+ //
+ // Report PEI Core debug information when remote debug is enabled
+ //
+ ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)PeiCoreImageBase;
+ ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID *)(UINTN)ImageContext.ImageAddress);
+ PeCoffLoaderRelocateImageExtraAction (&ImageContext);
+
+ //
+ // Find PEI Core entry point
+ //
+ Status = PeCoffLoaderGetEntryPoint ((VOID *)(UINTN)PeiCoreImageBase, (VOID **)PeiCoreEntryPoint);
+ if (EFI_ERROR (Status)) {
+ *PeiCoreEntryPoint = 0;
+ }
+
+ return;
+}
+
+/**
+ Find the peicore entry point and jump to the entry point to execute.
+
+ @param[in] Context The first input parameter of InitializeDebugAgent().
+**/
+VOID
+EFIAPI
+SecStartupPhase2 (
+ IN VOID *Context
+ )
+{
+ EFI_SEC_PEI_HAND_OFF *SecCoreData;
+ EFI_FIRMWARE_VOLUME_HEADER *BootFv;
+ EFI_PEI_CORE_ENTRY_POINT PeiCoreEntryPoint;
+
+ SecCoreData = (EFI_SEC_PEI_HAND_OFF *)Context;
+
+ //
+ // Find PEI Core entry point. It will report SEC and Pei Core debug information if remote debug
+ // is enabled.
+ //
+ BootFv = (EFI_FIRMWARE_VOLUME_HEADER *)SecCoreData->BootFirmwareVolumeBase;
+ FindAndReportEntryPoints (&BootFv, &PeiCoreEntryPoint);
+ SecCoreData->BootFirmwareVolumeBase = BootFv;
+ SecCoreData->BootFirmwareVolumeSize = (UINTN)BootFv->FvLength;
+
+ DEBUG ((DEBUG_INFO, "Find Pei EntryPoint=%p\n", PeiCoreEntryPoint));
+
+ //
+ // Transfer the control to the PEI core
+ //
+ DEBUG ((DEBUG_INFO, "SecStartupPhase2 %p\n", PeiCoreEntryPoint));
+
+ (*PeiCoreEntryPoint)(SecCoreData, (EFI_PEI_PPI_DESCRIPTOR *)&mPrivateDispatchTable);
+
+ //
+ // If we get here then the PEI Core returned, which is not recoverable.
+ //
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+}
+
+/**
+ Entry point to the C language phase of SEC. initialize some temporary memory and set up the stack,
+ the control is transferred to this function.
+
+ @param[in] BootFv The pointer to the PEI FV in memory.
+ @param[in] TopOfCurrentStack Top of Current Stack.
+**/
+VOID
+EFIAPI
+SecCoreStartupWithStack (
+ IN EFI_FIRMWARE_VOLUME_HEADER *BootFv,
+ IN VOID *TopOfCurrentStack
+ )
+{
+ EFI_SEC_PEI_HAND_OFF SecCoreData;
+ EFI_FIRMWARE_VOLUME_HEADER *BootPeiFv = (EFI_FIRMWARE_VOLUME_HEADER *)BootFv;
+
+ DEBUG ((DEBUG_INFO, "Entering C environment\n"));
+
+ ProcessLibraryConstructorList (NULL, NULL);
+
+ DEBUG ((
+ DEBUG_INFO,
+ "SecCoreStartupWithStack (0x%lx, 0x%lx)\n",
+ (UINTN)BootFv,
+ (UINTN)TopOfCurrentStack
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "(0x%lx, 0x%lx)\n",
+ (UINTN)(FixedPcdGet64 (PcdOvmfSecPeiTempRamBase)),
+ (UINTN)(FixedPcdGet32 (PcdOvmfSecPeiTempRamSize))
+ ));
+
+ // |-------------| <-- TopOfCurrentStack
+ // | BSP Stack | 32k
+ // |-------------|
+ // | BSP Heap | 32k
+ // |-------------| <-- SecCoreData.TemporaryRamBase
+ // | Ap Stack | 384k
+ // |-------------|
+ // | Exception | 64k
+ // |-------------| <-- PcdOvmfSecPeiTempRamBase
+
+ ASSERT (
+ (UINTN)(FixedPcdGet64 (PcdOvmfSecPeiTempRamBase) +
+ FixedPcdGet32 (PcdOvmfSecPeiTempRamSize)) ==
+ (UINTN)TopOfCurrentStack
+ );
+
+ //
+ // Initialize SEC hand-off state
+ //
+ SecCoreData.DataSize = sizeof (EFI_SEC_PEI_HAND_OFF);
+
+ SecCoreData.TemporaryRamSize = (UINTN)SIZE_64KB;
+ SecCoreData.TemporaryRamBase = (VOID *)(FixedPcdGet64 (PcdOvmfSecPeiTempRamBase) + FixedPcdGet32 (PcdOvmfSecPeiTempRamSize) - SecCoreData.TemporaryRamSize);
+
+ SecCoreData.PeiTemporaryRamBase = SecCoreData.TemporaryRamBase;
+ SecCoreData.PeiTemporaryRamSize = SecCoreData.TemporaryRamSize >> 1;
+
+ SecCoreData.StackBase = (UINT8 *)SecCoreData.TemporaryRamBase + SecCoreData.PeiTemporaryRamSize;
+ SecCoreData.StackSize = SecCoreData.TemporaryRamSize >> 1;
+
+ SecCoreData.BootFirmwareVolumeBase = BootPeiFv;
+ SecCoreData.BootFirmwareVolumeSize = (UINTN)BootPeiFv->FvLength;
+
+ DEBUG ((
+ DEBUG_INFO,
+ "&SecCoreData.BootFirmwareVolumeBase=%lx SecCoreData.BootFirmwareVolumeBase=%lx\n",
+ (UINT64)&(SecCoreData.BootFirmwareVolumeBase),
+ (UINT64)(SecCoreData.BootFirmwareVolumeBase)
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "&SecCoreData.BootFirmwareVolumeSize=%lx SecCoreData.BootFirmwareVolumeSize=%lx\n",
+ (UINT64)&(SecCoreData.BootFirmwareVolumeSize),
+ (UINT64)(SecCoreData.BootFirmwareVolumeSize)
+ ));
+
+ //
+ // Initialize Debug Agent to support source level debug in SEC/PEI phases before memory ready.
+ //
+ InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL, NULL);
+ SecStartupPhase2 (&SecCoreData);
+}
+
+/**
+ temporary memory to permanent memory and do stack switching.
+
+ @param[in] PeiServices Pointer to the PEI Services Table.
+ @param[in] TemporaryMemoryBase Temporary Memory Base address.
+ @param[in] PermanentMemoryBase Permanent Memory Base address.
+ @param[in] CopySize The size of memory that needs to be migrated.
+
+ @retval EFI_SUCCESS Migration successful.
+**/
+EFI_STATUS
+EFIAPI
+TemporaryRamMigration (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
+ IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
+ IN UINTN CopySize
+ )
+{
+ VOID *OldHeap;
+ VOID *NewHeap;
+ VOID *OldStack;
+ VOID *NewStack;
+ BASE_LIBRARY_JUMP_BUFFER JumpBuffer;
+
+ DEBUG ((
+ DEBUG_INFO,
+ "TemporaryRamMigration (0x%Lx, 0x%Lx, 0x%Lx)\n",
+ TemporaryMemoryBase,
+ PermanentMemoryBase,
+ (UINT64)CopySize
+ ));
+
+ OldHeap = (VOID *)(UINTN)TemporaryMemoryBase;
+ NewHeap = (VOID *)((UINTN)PermanentMemoryBase + (CopySize >> 1));
+
+ OldStack = (VOID *)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
+ NewStack = (VOID *)(UINTN)PermanentMemoryBase;
+
+ //
+ // Migrate Heap
+ //
+ CopyMem (NewHeap, OldHeap, CopySize >> 1);
+
+ //
+ // Migrate Stack
+ //
+ CopyMem (NewStack, OldStack, CopySize >> 1);
+
+ // Use SetJump ()/LongJump () to switch to a new stack.
+ //
+ if (SetJump (&JumpBuffer) == 0) {
+ JumpBuffer.SP = JumpBuffer.SP - (UINTN)OldStack + (UINTN)NewStack;
+ LongJump (&JumpBuffer, (UINTN)-1);
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/Sec/SecMain.inf b/OvmfPkg/LoongArchVirt/Sec/SecMain.inf
new file mode 100644
index 0000000000..d528aae02b
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Sec/SecMain.inf
@@ -0,0 +1,53 @@
+## @file
+# SEC Driver
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecMain
+ FILE_GUID = 57d02d4f-5a5d-4bfa-b7d6-ba0a4d2c72ce
+ MODULE_TYPE = SEC
+ VERSION_STRING = 1.0
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ LoongArch64/Start.S
+ SecMain.c
+
+[Packages]
+ OvmfPkg/OvmfPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ BaseMemoryLib
+ PcdLib
+ DebugAgentLib
+ IoLib
+ PeCoffLib
+ PeCoffGetEntryPointLib
+ PeCoffExtraActionLib
+ CpuExceptionHandlerLib
+
+[Ppis]
+ gEfiTemporaryRamSupportPpiGuid # PPI ALWAYS_PRODUCED
+
+[FixedPcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
+
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber
+
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110731): https://edk2.groups.io/g/devel/message/110731
Mute This Topic: https://groups.io/mt/102413910/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 28/30] OvmfPkg/LoongArchVirt: Support PEI phase
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (26 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 27/30] OvmfPkg/LoongArchVirt: Support SEC phase Chao Li
@ 2023-11-06 3:30 ` Chao Li
2023-11-06 3:31 ` [edk2-devel] [PATCH v2 29/30] OvmfPkg/LoongArchVirt: Add build file Chao Li
` (4 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:30 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Platfrom PEI module for LoongArch platfrom initialization.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
OvmfPkg/LoongArchVirt/PlatformPei/Fv.c | 40 ++
OvmfPkg/LoongArchVirt/PlatformPei/MemDetect.c | 203 +++++++++
OvmfPkg/LoongArchVirt/PlatformPei/Platform.c | 393 ++++++++++++++++++
OvmfPkg/LoongArchVirt/PlatformPei/Platform.h | 128 ++++++
.../LoongArchVirt/PlatformPei/PlatformPei.inf | 72 ++++
5 files changed, 836 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/PlatformPei/Fv.c
create mode 100644 OvmfPkg/LoongArchVirt/PlatformPei/MemDetect.c
create mode 100644 OvmfPkg/LoongArchVirt/PlatformPei/Platform.c
create mode 100644 OvmfPkg/LoongArchVirt/PlatformPei/Platform.h
create mode 100644 OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf
diff --git a/OvmfPkg/LoongArchVirt/PlatformPei/Fv.c b/OvmfPkg/LoongArchVirt/PlatformPei/Fv.c
new file mode 100644
index 0000000000..eb9e29d580
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/PlatformPei/Fv.c
@@ -0,0 +1,40 @@
+/** @file
+ Build FV related hobs for platform.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "PiPei.h"
+#include "Platform.h"
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/PcdLib.h>
+
+/**
+ Publish PEI & DXE (Decompressed) Memory based FVs to let PEI
+ and DXE know about them.
+
+ @retval EFI_SUCCESS Platform PEI FVs were initialized successfully.
+**/
+EFI_STATUS
+PeiFvInitialization (
+ VOID
+ )
+{
+ DEBUG ((DEBUG_INFO, "Platform PEI Firmware Volume Initialization\n"));
+
+ //
+ // Create a memory allocation HOB for the PEI FV.
+ //
+ BuildMemoryAllocationHob (
+ FixedPcdGet64 (PcdOvmfSecPeiTempRamBase),
+ FixedPcdGet32 (PcdOvmfSecPeiTempRamSize),
+ EfiBootServicesData
+ );
+
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/PlatformPei/MemDetect.c b/OvmfPkg/LoongArchVirt/PlatformPei/MemDetect.c
new file mode 100644
index 0000000000..d345a3346f
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/PlatformPei/MemDetect.c
@@ -0,0 +1,203 @@
+/** @file
+ Memory Detection for Virtual Machines.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+//
+// The package level header files this module uses
+//
+#include <PiPei.h>
+
+//
+// The Library classes this module consumes
+//
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/ResourcePublicationLib.h>
+#include <Library/QemuFwCfgLib.h>
+#include "Platform.h"
+
+#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS (128)
+#define LOONGARCH_FW_RAM_TOP BASE_256MB
+
+/**
+ Publish PEI core memory
+
+ @return EFI_SUCCESS The PEIM initialized successfully.
+**/
+EFI_STATUS
+PublishPeiMemory (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Base;
+ UINT64 Size;
+ UINT64 RamTop;
+
+ //
+ // Determine the range of memory to use during PEI
+ //
+ Base = FixedPcdGet64 (PcdOvmfSecPeiTempRamBase) + FixedPcdGet32 (PcdOvmfSecPeiTempRamSize);
+ RamTop = LOONGARCH_FW_RAM_TOP;
+ Size = RamTop - Base;
+
+ //
+ // Publish this memory to the PEI Core
+ //
+ Status = PublishSystemMemory (Base, Size);
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG ((DEBUG_INFO, "Publish Memory Initialize done.\n"));
+ return Status;
+}
+
+/**
+ Peform Memory Detection
+ Publish system RAM and reserve memory regions
+**/
+VOID
+InitializeRamRegions (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ FIRMWARE_CONFIG_ITEM FwCfgItem;
+ UINTN FwCfgSize;
+ MEMMAP_ENTRY MemoryMapEntry;
+ MEMMAP_ENTRY *StartEntry;
+ MEMMAP_ENTRY *pEntry;
+ UINTN Processed;
+
+ Status = QemuFwCfgFindFile ("etc/memmap", &FwCfgItem, &FwCfgSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a %d read etc/memmap error Status %d \n", __func__, __LINE__, Status));
+ return;
+ }
+
+ if (FwCfgSize % sizeof MemoryMapEntry != 0) {
+ DEBUG ((DEBUG_ERROR, "no MemoryMapEntry FwCfgSize:%d\n", FwCfgSize));
+ return;
+ }
+
+ QemuFwCfgSelectItem (FwCfgItem);
+ StartEntry = AllocatePages (EFI_SIZE_TO_PAGES (FwCfgSize));
+ QemuFwCfgReadBytes (FwCfgSize, StartEntry);
+ for (Processed = 0; Processed < (FwCfgSize / sizeof MemoryMapEntry); Processed++) {
+ pEntry = StartEntry + Processed;
+ if (pEntry->Length == 0) {
+ continue;
+ }
+
+ DEBUG ((DEBUG_INFO, "MemmapEntry Base %p length %p type %d\n", pEntry->BaseAddr, pEntry->Length, pEntry->Type));
+ if (pEntry->Type != EfiAcpiAddressRangeMemory) {
+ continue;
+ }
+
+ AddMemoryRangeHob (pEntry->BaseAddr, pEntry->BaseAddr + pEntry->Length);
+ }
+
+ //
+ // When 0 address protection is enabled,
+ // 0-4k memory needs to be preallocated to prevent UEFI applications from allocating use,
+ // such as grub
+ //
+ if (PcdGet8 (PcdNullPointerDetectionPropertyMask) & BIT0) {
+ BuildMemoryAllocationHob (
+ 0,
+ EFI_PAGE_SIZE,
+ EfiBootServicesData
+ );
+ }
+}
+
+/**
+ Gets the Virtual Memory Map of corresponding platforms
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on corresponding platforms.
+
+ @param[out] VirtualMemoryMap Array of MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry. The allocated memory
+ will not be freed.
+ @retval MemoryTable size. If -1 is returned, means etc/memmap not exit.
+**/
+UINTN
+EFIAPI
+GetMemoryMapPolicy (
+ OUT MEMORY_REGION_DESCRIPTOR **VirtualMemoryMap
+ )
+{
+ EFI_STATUS Status;
+ FIRMWARE_CONFIG_ITEM FwCfgItem;
+ UINTN FwCfgSize;
+ MEMMAP_ENTRY MemoryMapEntry;
+ MEMMAP_ENTRY *StartEntry;
+ MEMMAP_ENTRY *pEntry;
+ UINTN Processed;
+ MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
+ UINTN Index = 0;
+
+ ASSERT (VirtualMemoryMap != NULL);
+
+ VirtualMemoryTable = AllocatePool (
+ sizeof (MEMORY_REGION_DESCRIPTOR) *
+ MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS
+ );
+
+ //
+ // Add the 0x10000000-0x20000000. In the virtual machine, this area use for CPU UART, flash, PIC etc.
+ //
+ VirtualMemoryTable[Index].PhysicalBase = 0x10000000;
+ VirtualMemoryTable[Index].VirtualBase = VirtualMemoryTable[Index].PhysicalBase;
+ VirtualMemoryTable[Index].Length = 0x10000000;
+ VirtualMemoryTable[Index].Attributes = PAGE_VALID | PLV_KERNEL | CACHE_SUC | PAGE_DIRTY | PAGE_GLOBAL;
+ ++Index;
+
+ Status = QemuFwCfgFindFile ("etc/memmap", &FwCfgItem, &FwCfgSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a %d read etc/memmap error Status %d \n", __func__, __LINE__, Status));
+ ZeroMem (&VirtualMemoryTable[Index], sizeof (MEMORY_REGION_DESCRIPTOR));
+ *VirtualMemoryMap = VirtualMemoryTable;
+ return -1;
+ }
+
+ if (FwCfgSize % sizeof MemoryMapEntry != 0) {
+ DEBUG ((DEBUG_ERROR, "no MemoryMapEntry FwCfgSize:%d\n", FwCfgSize));
+ }
+
+ QemuFwCfgSelectItem (FwCfgItem);
+ StartEntry = AllocatePages (EFI_SIZE_TO_PAGES (FwCfgSize));
+ QemuFwCfgReadBytes (FwCfgSize, StartEntry);
+ for (Processed = 0; Processed < (FwCfgSize / sizeof MemoryMapEntry); Processed++) {
+ pEntry = StartEntry + Processed;
+ if (pEntry->Length == 0) {
+ continue;
+ }
+
+ DEBUG ((DEBUG_INFO, "MemmapEntry Base %p length %p type %d\n", pEntry->BaseAddr, pEntry->Length, pEntry->Type));
+ VirtualMemoryTable[Index].PhysicalBase = pEntry->BaseAddr;
+ VirtualMemoryTable[Index].VirtualBase = VirtualMemoryTable[Index].PhysicalBase;
+ VirtualMemoryTable[Index].Length = pEntry->Length;
+ VirtualMemoryTable[Index].Attributes = PAGE_VALID | PLV_KERNEL | CACHE_CC | PAGE_DIRTY | PAGE_GLOBAL;
+ ++Index;
+ }
+
+ FreePages (StartEntry, EFI_SIZE_TO_PAGES (FwCfgSize));
+ // End of Table
+ ZeroMem (&VirtualMemoryTable[Index], sizeof (MEMORY_REGION_DESCRIPTOR));
+ *VirtualMemoryMap = VirtualMemoryTable;
+
+ return Index;
+}
diff --git a/OvmfPkg/LoongArchVirt/PlatformPei/Platform.c b/OvmfPkg/LoongArchVirt/PlatformPei/Platform.c
new file mode 100644
index 0000000000..b4b2530948
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/PlatformPei/Platform.c
@@ -0,0 +1,393 @@
+/** @file
+ Platform PEI driver
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Mem - Memory
+**/
+
+//
+// The package level header files this module uses
+//
+#include <PiPei.h>
+//
+// The Library classes this module consumes
+//
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/ResourcePublicationLib.h>
+#include <Library/MpInitLib.h>
+#include <Library/PlatformHookLib.h>
+#include <Guid/MemoryTypeInformation.h>
+#include <Library/QemuFwCfgLib.h>
+#include <Guid/FdtHob.h>
+#include <libfdt.h>
+#include <Ppi/MasterBootMode.h>
+#include <Register/LoongArch64/Cpucfg.h>
+#include <Register/LoongArch64/Csr.h>
+
+#include "Platform.h"
+
+VOID
+SaveRtcRegisterAddressHob (
+ UINT64 RtcRegisterBase
+ );
+
+/* TODO */
+EFI_MEMORY_TYPE_INFORMATION mDefaultMemoryTypeInformation[] = {
+ { EfiReservedMemoryType, 0x004 },
+ { EfiRuntimeServicesData, 0x024 },
+ { EfiRuntimeServicesCode, 0x030 },
+ { EfiBootServicesCode, 0x180 },
+ { EfiBootServicesData, 0xF00 },
+ { EfiMaxMemoryType, 0x000 }
+};
+
+//
+// Module globals
+//
+CONST EFI_PEI_PPI_DESCRIPTOR mPpiListBootMode = {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiPeiMasterBootModePpiGuid,
+ NULL
+};
+
+STATIC EFI_BOOT_MODE mBootMode = BOOT_WITH_FULL_CONFIGURATION;
+
+/**
+ Create Reserved type memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddReservedMemoryBaseSizeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ UINT64 MemorySize
+ )
+{
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_MEMORY_RESERVED,
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED,
+ MemoryBase,
+ MemorySize
+ );
+}
+
+/**
+ Create system type memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddMemoryBaseSizeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ UINT64 MemorySize
+ )
+{
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED,
+ MemoryBase,
+ MemorySize
+ );
+}
+
+/**
+ Create memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddMemoryRangeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ EFI_PHYSICAL_ADDRESS MemoryLimit
+ )
+{
+ AddMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
+}
+
+/**
+ Create memory type information hand off block.
+
+ @param VOID
+
+ @return VOID
+**/
+VOID
+MemMapInitialization (
+ VOID
+ )
+{
+ DEBUG ((DEBUG_INFO, "==%a==\n", __func__));
+ //
+ // Create Memory Type Information HOB
+ //
+ BuildGuidDataHob (
+ &gEfiMemoryTypeInformationGuid,
+ mDefaultMemoryTypeInformation,
+ sizeof (mDefaultMemoryTypeInformation)
+ );
+}
+
+/** Get the Rtc base address from the DT.
+
+ This function fetches the node referenced in the "loongson,ls7a-rtc"
+ property of the "reg" node and returns the base address of
+ the RTC.
+
+ @param [in] Fdt Pointer to a Flattened Device Tree (Fdt).
+ @param [out] RtcBaseAddress If success, contains the base address
+ of the Rtc.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND RTC info not found in DT.
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetRtcAddress (
+ IN CONST VOID *Fdt,
+ OUT UINT64 *RtcBaseAddress
+ )
+{
+ INT32 Node;
+ INT32 Prev;
+ CONST CHAR8 *Type;
+ INT32 Len;
+ CONST UINT64 *RegProp;
+ EFI_STATUS Status;
+
+ if ((Fdt == NULL) || (fdt_check_header (Fdt) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = EFI_NOT_FOUND;
+ for (Prev = 0; ; Prev = Node) {
+ Node = fdt_next_node (Fdt, Prev, NULL);
+ if (Node < 0) {
+ break;
+ }
+
+ //
+ // Check for memory node
+ //
+ Type = fdt_getprop (Fdt, Node, "compatible", &Len);
+ if ((Type) && (AsciiStrnCmp (Type, "loongson,ls7a-rtc", Len) == 0)) {
+ //
+ // Get the 'reg' property of this node. For now, we will assume
+ // two 8 byte quantities for base and size, respectively.
+ //
+ RegProp = fdt_getprop (Fdt, Node, "reg", &Len);
+ if ((RegProp != 0) && (Len == (2 * sizeof (UINT64)))) {
+ *RtcBaseAddress = SwapBytes64 (RegProp[0]);
+ Status = RETURN_SUCCESS;
+ DEBUG ((DEBUG_INFO, "%a Len %d RtcBase %llx\n", __func__, Len, *RtcBaseAddress));
+ break;
+ } else {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to parse FDT rtc node\n", __FUNCTION__));
+ break;
+ }
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Misc Initialization.
+
+ @param VOID
+
+ @return VOID
+**/
+VOID
+MiscInitialization (
+ VOID
+ )
+{
+ CPUCFG_REG1_INFO_DATA CpucfgReg1Data;
+ UINT8 CpuPhysMemAddressWidth;
+
+ DEBUG ((DEBUG_INFO, "==%a==\n", __func__));
+
+ //
+ // Get the the CPU physical memory address width.
+ //
+ AsmCpucfg (CPUCFG_REG1_INFO, &CpucfgReg1Data.Uint32);
+
+ CpuPhysMemAddressWidth = (UINT8)(CpucfgReg1Data.Bits.PALEN + 1);
+
+ //
+ // Creat CPU HOBs.
+ //
+ BuildCpuHob (CpuPhysMemAddressWidth, FixedPcdGet8 (PcdPrePiCpuIoSize));
+}
+
+/**
+ add fdt hand off block.
+
+ @param VOID
+
+ @return VOID
+**/
+VOID
+AddFdtHob (
+ VOID
+ )
+{
+ VOID *Base;
+ VOID *NewBase;
+ UINTN FdtSize;
+ UINTN FdtPages;
+ UINT64 *FdtHobData;
+ UINT64 RtcBaseAddress;
+ RETURN_STATUS Status;
+
+ Base = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ ASSERT (Base != NULL);
+
+ Status = GetRtcAddress (Base, &RtcBaseAddress);
+ if (RETURN_ERROR (Status)) {
+ return;
+ }
+
+ SaveRtcRegisterAddressHob (RtcBaseAddress);
+
+ FdtSize = fdt_totalsize (Base) + PcdGet32 (PcdDeviceTreeAllocationPadding);
+ FdtPages = EFI_SIZE_TO_PAGES (FdtSize);
+ NewBase = AllocatePages (FdtPages);
+ ASSERT (NewBase != NULL);
+ fdt_open_into (Base, NewBase, EFI_PAGES_TO_SIZE (FdtPages));
+
+ FdtHobData = BuildGuidHob (&gFdtHobGuid, sizeof *FdtHobData);
+ ASSERT (FdtHobData != NULL);
+ *FdtHobData = (UINTN)NewBase;
+}
+
+/**
+ Fetch the size of system memory from QEMU.
+
+ @param VOID
+
+ @return VOID
+**/
+VOID
+ReportSystemMemorySize (
+ VOID
+ )
+{
+ UINT64 RamSize;
+
+ QemuFwCfgSelectItem (QemuFwCfgItemRamSize);
+ RamSize = QemuFwCfgRead64 ();
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: QEMU reports %dM system memory\n",
+ __FUNCTION__,
+ RamSize/1024/1024
+ ));
+
+ //
+ // Assert false if QEMU report system memory size is less then 256M.
+ //
+ if (RamSize <= SIZE_256MB) {
+ ASSERT (FALSE);
+ }
+}
+
+/**
+ Perform Platform PEI initialization.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @return EFI_SUCCESS The PEIM initialized successfully.
+**/
+EFI_STATUS
+EFIAPI
+InitializePlatform (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ UINTN TranslationTableSize;
+ MEMORY_REGION_DESCRIPTOR *MemoryTable;
+
+ DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));
+
+ Status = PeiServicesSetBootMode (mBootMode);
+ ASSERT_EFI_ERROR (Status);
+
+ Status = PeiServicesInstallPpi (&mPpiListBootMode);
+ ASSERT_EFI_ERROR (Status);
+
+ ReportSystemMemorySize ();
+
+ PublishPeiMemory ();
+
+ PeiFvInitialization ();
+ InitializeRamRegions ();
+ MemMapInitialization ();
+
+ Status = PlatformHookSerialPortInitialize ();
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Collect numbers of on line processors and all of APs APIC ID
+ // TODO: Current, the NULL library is used, this library will be populated in the future.
+ //
+ CollectAllProcessorResource ();
+
+ MiscInitialization ();
+
+ AddFdtHob ();
+
+ TranslationTableSize = GetMemoryMapPolicy (&MemoryTable);
+ Status = ConfigureMemoryManagementUint (
+ MemoryTable,
+ NULL,
+ &TranslationTableSize
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Open MMU.
+ //
+ DEBUG ((DEBUG_INFO, "Open MMU start.\n"));
+ CsrXChg (LOONGARCH_CSR_CRMD, BIT4, BIT4|BIT3);
+ DEBUG ((DEBUG_INFO, "Open MMU done.\n"));
+
+ MpInitLibInitialize ();
+
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/LoongArchVirt/PlatformPei/Platform.h b/OvmfPkg/LoongArchVirt/PlatformPei/Platform.h
new file mode 100644
index 0000000000..0e295a8c66
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/PlatformPei/Platform.h
@@ -0,0 +1,128 @@
+/** @file
+ Platform PEI module include file.
+
+ Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef PLATFORM_H_
+#define PLATFORM_H_
+
+#include <IndustryStandard/Pci22.h>
+#include <IndustryStandard/E820.h>
+#include <Library/CpuMmuLib.h>
+
+typedef struct {
+ UINT64 BaseAddr;
+ UINT64 Length;
+ UINT32 Type;
+ UINT32 Reserved;
+} MEMMAP_ENTRY;
+
+VOID
+EFIAPI
+CollectAllProcessorResource (
+ VOID
+ );
+
+VOID
+EFIAPI
+SaveProcessorResource (
+ VOID
+ );
+
+/**
+ Create system type memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddMemoryBaseSizeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ UINT64 MemorySize
+ );
+
+/**
+ Create memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddMemoryRangeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ EFI_PHYSICAL_ADDRESS MemoryLimit
+ );
+
+/**
+ Create Reserved type memory range hand off block.
+
+ @param MemoryBase memory base address.
+ @param MemoryLimit memory length.
+
+ @return VOID
+**/
+VOID
+AddReservedMemoryBaseSizeHob (
+ EFI_PHYSICAL_ADDRESS MemoryBase,
+ UINT64 MemorySize
+ );
+
+/**
+ Publish PEI core memory
+
+ @return EFI_SUCCESS The PEIM initialized successfully.
+**/
+EFI_STATUS
+PublishPeiMemory (
+ VOID
+ );
+
+/**
+ Publish system RAM and reserve memory regions
+
+ @return VOID
+**/
+VOID
+InitializeRamRegions (
+ VOID
+ );
+
+/**
+ Publish PEI & DXE (Decompressed) Memory based FVs to let PEI
+ and DXE know about them.
+
+ @retval EFI_SUCCESS Platform PEI FVs were initialized successfully.
+**/
+EFI_STATUS
+PeiFvInitialization (
+ VOID
+ );
+
+/**
+ Gets the Virtual Memory Map of corresponding platforms
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on corresponding platforms.
+
+ @param[out] VirtualMemoryMap Array of MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry. The allocated memory
+ will not be freed.
+ @retval MemoryTable size.
+**/
+UINTN
+EFIAPI
+GetMemoryMapPolicy (
+ OUT MEMORY_REGION_DESCRIPTOR **VirtualMemoryMap
+ );
+
+#endif // PLATFORM_H_
diff --git a/OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf b/OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf
new file mode 100644
index 0000000000..a9775bab1f
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf
@@ -0,0 +1,72 @@
+## @file
+# Platform PEI driver
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PlatformPei
+ FILE_GUID = 4c0e81e5-e8e3-4eef-b24b-19b686e9ab53
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializePlatform
+
+#
+# VALID_ARCHITECTURES = LOONGARCH64
+#
+
+[Sources]
+ Fv.c
+ MemDetect.c
+ Platform.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[Ppis]
+ gEfiPeiMasterBootModePpiGuid
+
+[Guids]
+ gEfiMemoryTypeInformationGuid
+ gFdtHobGuid
+
+[LibraryClasses]
+ DebugLib
+ BaseMemoryLib
+ HobLib
+ IoLib
+ PeiResourcePublicationLib
+ PeiServicesLib
+ PeiServicesTablePointerLib
+ PeimEntryPoint
+ QemuFwCfgLib
+ PcdLib
+ TimerLib
+ CpuMmuLib
+ MpInitLib
+ MemoryAllocationLib
+ RealTimeClockLib
+ CollectApResourceLib
+ PlatformHookLib
+
+[Pcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
+
+[FixedPcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress
+
+[Depex]
+ TRUE
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110732): https://edk2.groups.io/g/devel/message/110732
Mute This Topic: https://groups.io/mt/102413911/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 29/30] OvmfPkg/LoongArchVirt: Add build file
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (27 preceding siblings ...)
2023-11-06 3:30 ` [edk2-devel] [PATCH v2 28/30] OvmfPkg/LoongArchVirt: Support PEI phase Chao Li
@ 2023-11-06 3:31 ` Chao Li
2023-11-06 3:31 ` [edk2-devel] [PATCH v2 30/30] OvmfPkg/LoongArchVirt: Add self introduction file Chao Li
` (3 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:31 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann,
Xianglai Li, Bibo Mao
Add infrastructure files to build edk2 for LoongArch QEMU virtual
machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
---
OvmfPkg/LoongArchVirt/LoongArchVirt.fdf.inc | 34 +
OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc | 675 ++++++++++++++++++++
OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf | 313 +++++++++
OvmfPkg/LoongArchVirt/VarStore.fdf.inc | 67 ++
4 files changed, 1089 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/LoongArchVirt.fdf.inc
create mode 100644 OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc
create mode 100644 OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf
create mode 100644 OvmfPkg/LoongArchVirt/VarStore.fdf.inc
diff --git a/OvmfPkg/LoongArchVirt/LoongArchVirt.fdf.inc b/OvmfPkg/LoongArchVirt/LoongArchVirt.fdf.inc
new file mode 100644
index 0000000000..47bd1e0a05
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/LoongArchVirt.fdf.inc
@@ -0,0 +1,34 @@
+## @file
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+DEFINE BLOCK_SIZE = 0x1000
+
+############################################################################
+# FW total
+DEFINE FW_BASE_ADDRESS = 0x1c000000
+DEFINE FW_BLOCKS = 0x400
+DEFINE FW_SIZE = 0x400000
+
+############################################################################
+#Flash code layout
+#Set Sec size in flash
+DEFINE SECFV_SIZE = 0x00010000
+
+#Set Pei size in flash
+DEFINE PEIFV_SIZE = 0x00040000
+
+#Set Dxe size in flash
+DEFINE DXEFV_SIZE = 0x00350000
+
+#Set FVMAIN size
+DEFINE FVMAIN_SIZE = $(SECFV_SIZE) + $(PEIFV_SIZE) +$(DXEFV_SIZE)
+
+#Set Memory layout
+DEFINE SEC_PEI_TEMP_RAM_BASE = 0x10000
+DEFINE SEC_PEI_TEMP_RAM_SIZE = 0x80000
+DEFINE DEVICE_TREE_RAM_BASE = 0x100000
diff --git a/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc b/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc
new file mode 100644
index 0000000000..6db4a5a1e6
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc
@@ -0,0 +1,675 @@
+## @file
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+###############################################################################
+[Defines]
+ PLATFORM_NAME = LoongArchVirtQemu
+ PLATFORMPKG_NAME = LoongArchVirtQemu
+ PLATFORM_GUID = 7926ea52-b0dc-4ee8-ac63-341eebd84ed4
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
+ SUPPORTED_ARCHITECTURES = LOONGARCH64
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf
+ TTY_TERMINAL = FALSE
+
+!include LoongArchVirt.fdf.inc
+
+ #
+ # Defines for default states. These can be changed on the command line.
+ # -D FLAG=VALUE
+ DEFINE TTY_TERMINAL = FALSE
+ DEFINE SECURE_BOOT_ENABLE = FALSE
+ DEFINE TPM2_ENABLE = FALSE
+ DEFINE TPM2_CONFIG_ENABLE = FALSE
+
+ #
+ # Network definition
+ #
+ DEFINE NETWORK_IP6_ENABLE = FALSE
+ DEFINE NETWORK_HTTP_BOOT_ENABLE = FALSE
+ DEFINE NETWORK_SNP_ENABLE = FALSE
+ DEFINE NETWORK_TLS_ENABLE = FALSE
+ DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = TRUE
+ DEFINE NETWORK_ISCSI_ENABLE = FALSE
+
+!include NetworkPkg/NetworkDefines.dsc.inc
+############################################################################
+#
+# Defines for default states. These can be changed on the command line.
+# -D FLAG=VALUE
+############################################################################
+[BuildOptions]
+ GCC:RELEASE_*_*_CC_FLAGS = -DSPEEDUP
+
+ #
+ # Disable deprecated APIs.
+ #
+ GCC:*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
+
+!include NetworkPkg/NetworkBuildOptions.dsc.inc
+
+[BuildOptions.LOONGARCH64.EDKII.SEC]
+ *_*_*_CC_FLAGS =
+
+#
+# Default page size is 16K for loongarch qemu tcg
+# code section separated with data section with 16K page alignment, else data
+# write operation in the same page with code section will cause qemu TB flush.
+#
+[BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
+ GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x4000
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+ GCC:*_*_LOONGARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+
+################################################################################
+#
+# SKU Identification section - list of all SKU IDs supported by this Platform.
+#
+################################################################################
+[SkuIds]
+ 0|DEFAULT
+
+################################################################################
+#
+# Library Class section - list of all Library Classes needed by this Platform.
+#
+################################################################################
+
+!include MdePkg/MdeLibs.dsc.inc
+
+[LibraryClasses.common]
+ PcdLib | MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ TimerLib | UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
+ PrintLib | MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BaseMemoryLib | MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+
+ # Networking Requirements
+!include NetworkPkg/NetworkLibs.dsc.inc
+!if $(NETWORK_TLS_ENABLE) == TRUE
+ TlsLib|CryptoPkg/Library/TlsLib/TlsLib.inf
+!endif
+
+ # For stack protector support
+ NULL | MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+ BaseLib | MdePkg/Library/BaseLib/BaseLib.inf
+ SafeIntLib | MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
+ TimeBaseLib | EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf
+ BmpSupportLib | MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
+ SynchronizationLib | MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+ CpuLib | MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+ PerformanceLib | MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
+ PeCoffLib | MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ CacheMaintenanceLib | MdePkg/Library/BaseCacheMaintenanceLib/BaseCacheMaintenanceLib.inf
+ UefiDecompressLib | MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ UefiHiiServicesLib | MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+ HiiLib | MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ CapsuleLib | MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+ DxeServicesLib | MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ DxeServicesTableLib | MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+ PeCoffGetEntryPointLib | MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PciLib | MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
+ PciExpressLib | OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
+ PciCapLib | OvmfPkg/Library/BasePciCapLib/BasePciCapLib.inf
+ PciCapPciSegmentLib | OvmfPkg/Library/BasePciCapPciSegmentLib/BasePciCapPciSegmentLib.inf
+ PciCapPciIoLib | OvmfPkg/Library/UefiPciCapPciIoLib/UefiPciCapPciIoLib.inf
+ DxeHardwareInfoLib | OvmfPkg/Library/HardwareInfoLib/DxeHardwareInfoLib.inf
+ IoLib | MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ PlatformHookLib | OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
+ SerialPortLib | MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+ EfiResetSystemLib | OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf
+ ResetSystemLib | OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/BaseResetSystemAcpiGedLib.inf
+
+ UefiLib | MdePkg/Library/UefiLib/UefiLib.inf
+ UefiBootServicesTableLib | MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ UefiRuntimeServicesTableLib | MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ UefiDriverEntryPoint | MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiApplicationEntryPoint | MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+ DevicePathLib | MdePkg/Library/UefiDevicePathLibDevicePathProtocol/UefiDevicePathLibDevicePathProtocol.inf
+ FileHandleLib | MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ SecurityManagementLib | MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ UefiUsbLib | MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
+ SerializeVariablesLib | OvmfPkg/Library/SerializeVariablesLib/SerializeVariablesLib.inf
+ CustomizedDisplayLib | MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ DebugPrintErrorLevelLib | MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+ TpmMeasurementLib | MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib | MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+ VarCheckLib | MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+ VariablePolicyLib | MdeModulePkg/Library/VariablePolicyLib/VariablePolicyLib.inf
+ VariablePolicyHelperLib | MdeModulePkg/Library/VariablePolicyHelperLib/VariablePolicyHelperLib.inf
+ SortLib | MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+ FdtLib | EmbeddedPkg/Library/FdtLib/FdtLib.inf
+ PciSegmentLib | MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+ PciHostBridgeLib | OvmfPkg/Fdt/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
+ PciHostBridgeUtilityLib | OvmfPkg/Library/PciHostBridgeUtilityLib/PciHostBridgeUtilityLib.inf
+ FileExplorerLib | MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+!if $(HTTP_BOOT_ENABLE) == TRUE
+ HttpLib | MdeModulePkg/Library/DxeHttpLib/DxeHttpLib.inf
+!endif
+ UefiBootManagerLib | MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ OrderedCollectionLib | MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf
+ ReportStatusCodeLib | MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+
+ PeCoffGetEntryPointLib | MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeCoffExtraActionLib | MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+ DebugAgentLib | MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+
+ PlatformBootManagerLib | OvmfPkg/LoongArchVirt/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ BootLogoLib | MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+ QemuBootOrderLib | OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
+ QemuFwCfgSimpleParserLib | OvmfPkg/Library/QemuFwCfgSimpleParserLib/QemuFwCfgSimpleParserLib.inf
+ QemuLoadImageLib | OvmfPkg/Library/GenericQemuLoadImageLib/GenericQemuLoadImageLib.inf
+
+ #
+ # Virtio Support
+ #
+ VirtioLib | OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ FrameBufferBltLib | MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
+ QemuFwCfgLib | OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLibMmio.inf
+ DebugLib | MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+ PeiServicesLib | MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ VariableFlashInfoLib | MdeModulePkg/Library/BaseVariableFlashInfoLib/BaseVariableFlashInfoLib.inf
+ VirtNorFlashPlatformLib | OvmfPkg/LoongArchVirt/Library/NorFlashQemuLib/NorFlashQemuLib.inf
+ CollectApResourceLib | OvmfPkg/LoongArchVirt/Library/CollectApResouceLibNull/CollectApResourceLibNull.inf
+
+[LibraryClasses.common.SEC]
+ PcdLib | MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ HobLib | MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ MemoryAllocationLib | MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiServicesTablePointerLib | OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+ PlatformHookLib | OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib | OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
+ CpuExceptionHandlerLib | UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
+
+[LibraryClasses.common.PEI_CORE]
+ PcdLib | MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ HobLib | MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesTablePointerLib | OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+ MemoryAllocationLib | MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiCoreEntryPoint | MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib | MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib | MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ QemuFwCfgLib | OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf
+ PlatformHookLib | OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib | OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
+
+[LibraryClasses.common.PEIM]
+ HobLib | MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesTablePointerLib | OvmfPkg/LoongArchVirt/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+ MemoryAllocationLib | MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeimEntryPoint | MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib | MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib | MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeiResourcePublicationLib | MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+ PcdLib | MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ QemuFwCfgS3Lib | OvmfPkg/Library/QemuFwCfgS3Lib/PeiQemuFwCfgS3LibFwCfg.inf
+ QemuFwCfgLib | OvmfPkg/LoongArchVirt/Library/FdtQemuFwCfgLib/FdtQemuFwCfgPeiLib.inf
+ CpuMmuLib | UefiCpuPkg/Library/LoongArch64CpuMmuLib/PeiCpuMmuLib.inf
+ MpInitLib | UefiCpuPkg/Library/LoongArch64MpInitLib/PeiMpInitLib.inf
+ PlatformHookLib | OvmfPkg/LoongArchVirt/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib | OvmfPkg/LoongArchVirt/Library/EarlyFdtSerialPortLib16550/EarlyFdtSerialPortLib16550.inf
+ RealTimeClockLib | OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/PeiLsRealTimeClockLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+ HobLib | MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+ DxeCoreEntryPoint | MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ MemoryAllocationLib | MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ PciExpressLib | MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PciPcdProducerLib | OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ CpuExceptionHandlerLib | UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ PcdLib | MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ HobLib | MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ DxeCoreEntryPoint | MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ MemoryAllocationLib | MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/RuntimeDxeReportStatusCodeLib/RuntimeDxeReportStatusCodeLib.inf
+ UefiRuntimeLib | MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+ QemuFwCfgS3Lib | OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf
+ RealTimeClockLib | OvmfPkg/LoongArchVirt/Library/LsRealTimeClockLib/DxeLsRealTimeClockLib.inf
+ VariablePolicyLib | MdeModulePkg/Library/VariablePolicyLib/VariablePolicyLibRuntimeDxe.inf
+ QemuFwCfgLib | OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLibMmio.inf
+ EfiResetSystemLib | OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf
+ ResetSystemLib | OvmfPkg/LoongArchVirt/Library/ResetSystemAcpiLib/DxeResetSystemAcpiGedLib.inf
+ PciExpressLib | MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+!if $(TARGET) != RELEASE
+ DebugLib | MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf
+!endif
+
+[LibraryClasses.common.UEFI_DRIVER]
+ PcdLib | MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ HobLib | MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ DxeCoreEntryPoint | MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ MemoryAllocationLib | MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ UefiScsiLib | MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+ QemuFwCfgLib | OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLibMmio.inf
+ PciPcdProducerLib | OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ PcdLib | MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ HobLib | MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib | MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib | MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ UefiScsiLib | MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+ CpuExceptionHandlerLib | UefiCpuPkg/Library/LoongArch64CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ QemuFwCfgS3Lib | OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf
+ QemuFwCfgLib | OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLibMmio.inf
+ PciPcdProducerLib | OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ PciExpressLib | MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ AcpiPlatformLib | OvmfPkg/Library/AcpiPlatformLib/DxeAcpiPlatformLib.inf
+ MpInitLib | UefiCpuPkg/Library/LoongArch64MpInitLib/DxeMpInitLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+ PcdLib | MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ HobLib | MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib | MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ PciPcdProducerLib | OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ PciExpressLib | MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform.
+#
+################################################################################
+[PcdsFeatureFlag]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport | FALSE
+# gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial | TRUE
+# gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory | TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress | TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport | TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport | FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport | FALSE
+ gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation | TRUE
+ gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation | TRUE
+[PcdsFixedAtBuild]
+## BaseLib ##
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength | 1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength | 1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength | 1000000
+ gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout | 10000000
+
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress | $(FW_BASE_ADDRESS)
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize | 1
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange | FALSE
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler | 0x10
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize | 0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize | 0x8000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress | 0x0
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask | 0x07
+
+ # Use MMIO for accessing Serial port registers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio | TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo | {0xFF}
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate | 115200
+
+ # DEBUG_INIT 0x00000001 // Initialization
+ # DEBUG_WARN 0x00000002 // Warnings
+ # DEBUG_LOAD 0x00000004 // Load events
+ # DEBUG_FS 0x00000008 // EFI File system
+ # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
+ # DEBUG_PAGE 0x00000020 // Alloc & Free (page)
+ # DEBUG_INFO 0x00000040 // Informational debug messages
+ # DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers
+ # DEBUG_VARIABLE 0x00000100 // Variable
+ # DEBUG_BM 0x00000400 // Boot Manager
+ # DEBUG_BLKIO 0x00001000 // BlkIo Driver
+ # DEBUG_NET 0x00004000 // Network Io Driver
+ # DEBUG_UNDI 0x00010000 // UNDI Driver
+ # DEBUG_LOADFILE 0x00020000 // LoadFile
+ # DEBUG_EVENT 0x00080000 // Event messages
+ # DEBUG_GCD 0x00100000 // Global Coherency Database changes
+ # DEBUG_CACHE 0x00200000 // Memory range cachability changes
+ # DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may
+ # DEBUG_ERROR 0x80000000 // Error
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel | 0x8000004F
+
+ # DEBUG_ASSERT_ENABLED 0x01
+ # DEBUG_PRINT_ENABLED 0x02
+ # DEBUG_CODE_ENABLED 0x04
+ # CLEAR_MEMORY_ENABLED 0x08
+ # ASSERT_BREAKPOINT_ENABLED 0x10
+ # ASSERT_DEADLOOP_ENABLED 0x20
+!if $(TARGET) == RELEASE
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask | 0x21
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask | 0x2f
+!endif
+
+#######################################################################################
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase | $(SEC_PEI_TEMP_RAM_BASE)
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize | $(SEC_PEI_TEMP_RAM_SIZE)
+ gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress | $(DEVICE_TREE_RAM_BASE)
+
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress | gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
+
+ #
+ # minimal memory for uefi bios should be 512M
+ # 0x00000000 - 0x10000000
+ # 0x90000000 - 0xA0000000
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions | 0x06
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile | { 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+
+ #
+ # Network Pcds
+ #
+!include NetworkPkg/NetworkPcds.dsc.inc
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize | 0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize | 0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize | 0x40000
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask | 1
+
+################################################################################
+#
+# Pcd Dynamic Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+[PcdsDynamicDefault]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration | FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution | 800
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution | 600
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut | 2
+
+ # Set video resolution for text setup.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution | 640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution | 480
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion | 0x0300
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev | 0x0
+
+ ## If TRUE, OvmfPkg/AcpiPlatformDxe will not wait for PCI
+ # enumeration to complete before installing ACPI tables.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration |TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation |0x0
+ # set PcdPciExpressBaseAddress to MAX_UINT64, which signifies that this
+ # PCD and PcdPciDisableBusEnumeration above have not been assigned yet
+ gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress |0xFFFFFFFFFFFFFFFF
+
+ #
+ # IPv4 and IPv6 PXE Boot support.
+ #
+ gEfiNetworkPkgTokenSpaceGuid.PcdIPv4PXESupport | 0x01
+ gEfiNetworkPkgTokenSpaceGuid.PcdIPv6PXESupport | 0x01
+
+ #
+ # SMBIOS entry point version
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0
+ gUefiOvmfPkgTokenSpaceGuid.PcdQemuSmbiosValidated|TRUE
+
+[PcdsPatchableInModule.common]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
+
+[Components]
+
+ #
+ # SEC Phase modules
+ #
+ OvmfPkg/LoongArchVirt/Sec/SecMain.inf
+
+ #
+ # PEI Phase modules
+ #
+ MdeModulePkg/Core/Pei/PeiMain.inf
+ MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+ MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ }
+
+ OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ }
+
+ #
+ # DXE Phase modules
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL | MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ DevicePathLib | MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ ExtractGuidedSectionLib | MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ }
+
+ MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+ MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf {
+ <LibraryClasses>
+ CpuMmuLib | UefiCpuPkg/Library/LoongArch64CpuMmuLib/DxeCpuMmuLib.inf
+ }
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf
+ MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+ MdeModulePkg/Universal/Metronome/Metronome.inf
+ EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+
+ #
+ # Variable
+ #
+ OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ }
+
+ #
+ # Platform Driver
+ #
+ OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem + virtio-fs
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+ MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+ OvmfPkg/VirtioFsDxe/VirtioFsDxe.inf
+
+ #
+ #BDS
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
+ <LibraryClasses>
+ DevicePathLib | MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ PcdLib | MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ MdeModulePkg/Logo/LogoDxe.inf
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+ OvmfPkg/QemuKernelLoaderFsDxe/QemuKernelLoaderFsDxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Library/BlobVerifierLibNull/BlobVerifierLibNull.inf
+ }
+
+ #
+ # Network Support
+ #
+#!include NetworkPkg/NetworkComponents.dsc.inc
+
+# NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf {
+# <LibraryClasses>
+# NULL|OvmfPkg/Library/PxeBcPcdProducerLib/PxeBcPcdProducerLib.inf
+# }
+
+!if $(NETWORK_TLS_ENABLE) == TRUE
+ NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Library/TlsAuthConfigLib/TlsAuthConfigLib.inf
+ }
+!endif
+ OvmfPkg/VirtioNetDxe/VirtioNet.inf
+
+ #
+ # IDE/SCSI
+ #
+ MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # NVME Driver
+ #
+ MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+ #
+ # SMBIOS Support
+ #
+ MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf {
+ <LibraryClasses>
+ NULL | OvmfPkg/Library/SmbiosVersionLib/DetectSmbiosVersionLib.inf
+ }
+ OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
+
+ #
+ # PCI
+ #
+ OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
+ }
+ EmbeddedPkg/Drivers/FdtClientDxe/FdtClientDxe.inf
+ MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
+ }
+ MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
+ }
+ OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
+ OvmfPkg/Virtio10Dxe/Virtio10.inf
+
+ #
+ # Console
+ #
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ }
+
+ #
+ # Video
+ #
+ OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
+ OvmfPkg/QemuRamfbDxe/QemuRamfbDxe.inf
+ OvmfPkg/VirtioGpuDxe/VirtioGpu.inf
+ OvmfPkg/PlatformDxe/Platform.inf
+
+ #
+ # Usb Support
+ #
+ MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
+ MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
+ MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
+ MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+ MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+
+ #
+ # ACPI Support
+ #
+ MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+ OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf {
+ <LibraryClasses>
+ NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ }
+
+ #
+ #app
+ #
+ ShellPkg/Application/Shell/Shell.inf {
+ <LibraryClasses>
+ ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+ HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+ ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+ FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+<PcdsFixedAtBuild>
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF
+ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000
+ }
diff --git a/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf b/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf
new file mode 100644
index 0000000000..5acba2e3bb
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/LoongArchVirtQemu.fdf
@@ -0,0 +1,313 @@
+## @file
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+#####################################################################################################
+[Defines]
+!include LoongArchVirt.fdf.inc
+
+#####################################################################################################
+[FD.QEMU_EFI]
+BaseAddress = $(FW_BASE_ADDRESS)
+Size = $(FW_SIZE)
+ErasePolarity = 1
+BlockSize = $(BLOCK_SIZE)
+NumBlocks = $(FW_BLOCKS)
+
+0x0|$(FVMAIN_SIZE)
+FV = FVMAIN_COMPACT
+
+!include VarStore.fdf.inc
+
+#####################################################################################################
+[FV.DXEFV]
+FvNameGuid = 5d19a5b3-130f-459b-a292-9270a9e6bc62
+BlockSize = $(BLOCK_SIZE)
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+
+APRIORI DXE {
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+}
+
+#
+# DXE Phase modules
+#
+INF MdeModulePkg/Core/Dxe/DxeMain.inf
+
+INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
+INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+INF UefiCpuPkg/CpuDxeLoongArch64/CpuDxe.inf
+INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+INF OvmfPkg/LoongArchVirt/Drivers/StableTimerDxe/TimerDxe.inf
+INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+INF MdeModulePkg/Universal/Metronome/Metronome.inf
+INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+
+#
+# Variable
+#
+INF OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
+INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+#
+# PCI
+#
+INF OvmfPkg/LoongArchVirt/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
+INF EmbeddedPkg/Drivers/FdtClientDxe/FdtClientDxe.inf
+INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
+INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
+INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
+INF OvmfPkg/Virtio10Dxe/Virtio10.inf
+
+#
+# Platform Driver
+#
+INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
+INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
+
+#
+# Console
+#
+INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
+INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+
+#
+#Video
+#
+INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
+INF OvmfPkg/QemuRamfbDxe/QemuRamfbDxe.inf
+INF OvmfPkg/VirtioGpuDxe/VirtioGpu.inf
+INF OvmfPkg/PlatformDxe/Platform.inf
+
+#
+# SATA/SCSI
+#
+INF MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf
+INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+#
+# NVME
+#
+INF MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+#
+# Usb Support
+#
+INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
+INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
+INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
+INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+
+#
+#BDS
+#
+INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+INF MdeModulePkg/Logo/LogoDxe.inf
+INF MdeModulePkg/Application/UiApp/UiApp.inf
+INF OvmfPkg/QemuKernelLoaderFsDxe/QemuKernelLoaderFsDxe.inf
+
+#
+#Smbios
+#
+INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
+
+#
+#Acpi
+#
+INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf
+
+#
+# Network modules
+#!include NetworkPkg/Network.fdf.inc
+
+#
+# File system
+#
+INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+INF FatPkg/EnhancedFatDxe/Fat.inf
+INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+INF OvmfPkg/VirtioFsDxe/VirtioFsDxe.inf
+
+#
+#Boot OS
+#
+INF ShellPkg/Application/Shell/Shell.inf
+
+#####################################################################################################
+[FV.FVMAIN_COMPACT]
+FvNameGuid = af8c3fe8-9ce8-4548-884a-e3f4dd91f040
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+#
+#
+# PEI Phase priori modules
+#
+APRIORI PEI {
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+}
+
+#
+# SEC Phase modules
+#
+INF OvmfPkg/LoongArchVirt/Sec/SecMain.inf
+
+#
+# PEI Phase modules
+#
+INF MdeModulePkg/Core/Pei/PeiMain.inf
+INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+INF OvmfPkg/LoongArchVirt/PlatformPei/PlatformPei.inf
+INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
+
+#
+# DXE Phase modules
+#
+FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = DXEFV
+ }
+ }
+
+#####################################################################################################
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) {
+ TE TE Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ RAW ACPI Optional |.acpi
+ RAW ASL Optional |.aml
+ }
+
+#####################################################################################################
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+#####################################################################################################
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+#####################################################################################################
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+#####################################################################################################
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ }
diff --git a/OvmfPkg/LoongArchVirt/VarStore.fdf.inc b/OvmfPkg/LoongArchVirt/VarStore.fdf.inc
new file mode 100644
index 0000000000..83ce3d8008
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/VarStore.fdf.inc
@@ -0,0 +1,67 @@
+## @file
+#
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[FD.QEMU_VARS]
+BaseAddress = 0x0
+Size = 0x1000000
+ErasePolarity = 1
+BlockSize = 0x20000
+NumBlocks = 128
+
+0x00000000|0x00040000
+#NV_VARIABLE_STORE
+DATA = {
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER
+ # ZeroVector []
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =
+ # { 0xFFF12B8D, 0x7696, 0x4C8B,
+ # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
+ # FvLength: 0xC0000
+ 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # Signature "_FVH" # Attributes
+ 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
+ # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
+ 0x48, 0x00, 0x28, 0x09, 0x00, 0x00, 0x00, 0x02,
+ # Blockmap[0]: 0x3 Blocks * 0x40000 Bytes / Block
+ 0x3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
+ # Blockmap[1]: End
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ ## This is the VARIABLE_STORE_HEADER
+ # It is compatible with SECURE_BOOT_ENABLE == FALSE as well.
+ # Signature: gEfiAuthenticatedVariableGuid =
+ # { 0xaaf32c78, 0x947b, 0x439a,
+ # { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
+ 0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
+ 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
+ # Size: 0x40000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
+ # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x3ffb8
+ # This can speed up the Variable Dispatch a bit.
+ 0xB8, 0xFF, 0x03, 0x00,
+ # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+0x00040000|0x00040000
+#NV_FTW_WORKING
+DATA = {
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
+ # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+ 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
+ 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
+ 0x5b, 0xe7, 0xc6, 0x86, 0xFE, 0xFF, 0xFF, 0xFF,
+ # WriteQueueSize: UINT64
+ 0xE0, 0xFF, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+0x00080000|0x00040000
+#NV_FTW_SPARE
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110733): https://edk2.groups.io/g/devel/message/110733
Mute This Topic: https://groups.io/mt/102413913/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread* [edk2-devel] [PATCH v2 30/30] OvmfPkg/LoongArchVirt: Add self introduction file
2023-11-06 3:25 [edk2-devel] [PATCH v2 00/30] Enable LoongArch virtual machine in edk2 Chao Li
` (28 preceding siblings ...)
2023-11-06 3:31 ` [edk2-devel] [PATCH v2 29/30] OvmfPkg/LoongArchVirt: Add build file Chao Li
@ 2023-11-06 3:31 ` Chao Li
[not found] ` <1794EAF40590BB23.26468@groups.io>
` (2 subsequent siblings)
32 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-06 3:31 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Jiewen Yao, Jordan Justen, Gerd Hoffmann
Add self introduction file for LoongArch virtual machine.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
OvmfPkg/LoongArchVirt/Readme.md | 67 +++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 OvmfPkg/LoongArchVirt/Readme.md
diff --git a/OvmfPkg/LoongArchVirt/Readme.md b/OvmfPkg/LoongArchVirt/Readme.md
new file mode 100644
index 0000000000..57fc74c296
--- /dev/null
+++ b/OvmfPkg/LoongArchVirt/Readme.md
@@ -0,0 +1,67 @@
+# LoongArch QEMU virt platform
+
+## Overview
+
+ LoongArch QEMU virt is a generic platform that dose not require any actual hardware.
+ The minimum required QEMU version is [8.1](https://gitlab.com/qemu-project/qemu/-/tags), the minimum required GCC version is [GCC13](https://gcc.gnu.org/gcc-13/), the minimum required Binutils version is [2.40](https://ftp.gnu.org/gnu/binutils/).
+
+## Prepare (X86 Linux Environment)
+
+### Fedora39
+Install LoongArch64 cross compiler, LoongArch system QEMU.
+
+ yum install gcc-loongarch64-linux-gnu
+ yum install qemu-system-loongarch64
+
+### Others X86 OS ENV
+#### Configure cross-tools
+
+**Download:**
+
+ wget https://github.com/loongson/build-tools/releases/download/2023.08.08/x86_64-cross-tools-loongarch64-binutils_2.41-gcc_13.2.0.tar.xz
+
+**Configure the cross-tools environment:**
+
+ mkdir /opt/loongarch64_cross-toolchain/
+ tar -vxf x86_64-cross-tools-loongarch64-binutils_2.41-gcc_13.2.0.tar.xz -C /opt/loongarch64_cross-toolchain/
+ export PATH=/opt/loongarch64_cross-toolchain/cross-tools/bin:$PATH
+
+Note: Please obtain [the latest cross-compilation](https://github.com/loongson/build-tools) toolchains.
+
+#### Build QEMU
+
+ git clone https://gitlab.com/qemu-project/qemu.git
+
+Note: Please refer to QEMU compilation rules, located in qemu/doc/system/loongarch/virt.rst.
+
+
+## Build LoongArch QEMU virtual machine firmware
+#### Get edk2 resouces
+
+ git clone --recurse-submodule https://github.com/tianocore/edk2.git
+
+#### Building LoongArch QEMU virt FW with GCC
+
+ export WORKSPACE=`pwd`
+ export GCC5_LOONGARCH64_PREFIX=loongarch64-unknown-linux-gnu-
+ export PACKAGES_PATH=$WORKSPACE/edk2
+ export EDK_TOOLS_PATH=$WORKSPACE/edk2/BaseTools
+ source edk2/edksetup.sh --reconfig
+ make -C edk2/BaseTools
+ source edk2/edksetup.sh BaseTools
+ build -b RELEASE -t GCC5 -a LOONGARCH64 -p OvmfPkg/LoongArchVirt/LoongArchVirtQemu.dsc
+
+## Test LoongArch QEMU virtual machine firmware
+ qemu-system-loongarch64 \
+ -m 4G \
+ -M virt \
+ -smp 2 \
+ -cpu la464 \
+ -bios Build/LoongArchVirtQemu/RELEASE_GCC5/FV/QEMU_EFI.fd \
+ -serial stdio
+
+## Test LoongArch QEMU virtual machine OS
+
+* Download ArchLinux QCOW [images](https://mirrors.pku.edu.cn/loongarch/archlinux/images) for LoongArch.
+
+* [Running LoongArch ArchLinux on virtual machine](https://mirrors.pku.edu.cn/loongarch/archlinux/images/README.html).
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110734): https://edk2.groups.io/g/devel/message/110734
Mute This Topic: https://groups.io/mt/102413917/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 71+ messages in thread[parent not found: <1794EAF40590BB23.26468@groups.io>]
* Re: [edk2-devel] [PATCH v2 09/30] UefiCpuPkg: Add LoongArch64 CPU Timer library
[not found] ` <1794EAF40590BB23.26468@groups.io>
@ 2023-11-07 6:41 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-07 6:41 UTC (permalink / raw)
To: devel; +Cc: Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann
[-- Attachment #1: Type: text/plain, Size: 11179 bytes --]
Hi Ray,
Could you please continue to review this patch set? You have Acked the
patch 13, and patches 9, 10, 11, 12 and 14 placed the UefiCpuPkg. Note
the patches 11 and 12 is the memory management library, these two
patches are provide a method for the publicMmuLib, the other patches are
LoongArch specific.
Thanks,
Chao
在 2023/11/6 11:28, Chao Li 写道:
> Add the LoongArch64 CPU Timer library, using CPUCFG 0x4 and 0x5 for
> Stable Counter frequency.
>
> BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Eric Dong<eric.dong@intel.com>
> Cc: Ray Ni<ray.ni@intel.com>
> Cc: Rahul Kumar<rahul1.kumar@intel.com>
> Cc: Gerd Hoffmann<kraxel@redhat.com>
> Signed-off-by: Chao Li<lichao@loongson.cn>
> ---
> .../BaseLoongArch64CpuTimerLib.inf | 30 +++
> .../BaseLoongArch64CpuTimerLib.uni | 15 ++
> .../BaseLoongArch64CpuTimerLib/CpuTimerLib.c | 226 ++++++++++++++++++
> UefiCpuPkg/UefiCpuPkg.dsc | 3 +
> 4 files changed, 274 insertions(+)
> create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
> create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
> create mode 100644 UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
>
> diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
> new file mode 100644
> index 0000000000..c00c215aec
> --- /dev/null
> +++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
> @@ -0,0 +1,30 @@
> +## @file
> +# Base CPU Timer Library
> +#
> +# Provides base timer support using CPUCFG 0x4 and 0x5 stable counter frequency.
> +#
> +# Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = BaseLoongArch64CpuTimerLib
> + FILE_GUID = 740389C7-CC44-4A2F-88DC-89D97D312E7C
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = TimerLib
> + MODULE_UNI_FILE = BaseLoongArch64CpuTimerLib.uni
> +
> +[Sources.common]
> + CpuTimerLib.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + UefiCpuPkg/UefiCpuPkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + PcdLib
> + DebugLib
> diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
> new file mode 100644
> index 0000000000..72d38ec679
> --- /dev/null
> +++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.uni
> @@ -0,0 +1,15 @@
> +// /** @file
> +// Base CPU Timer Library
> +//
> +// Provides base timer support using CPUCFG 0x4 and 0x5 stable counter frequency.
> +//
> +// Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
> +//
> +// SPDX-License-Identifier: BSD-2-Clause-Patent
> +//
> +// **/
> +
> +
> +#string STR_MODULE_ABSTRACT #language en-US "LOONGARCH CPU Timer Library"
> +
> +#string STR_MODULE_DESCRIPTION #language en-US "Provides basic timer support using CPUCFG 0x4 and 0x5 stable counter frequency."
> diff --git a/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
> new file mode 100644
> index 0000000000..349b881cbc
> --- /dev/null
> +++ b/UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/CpuTimerLib.c
> @@ -0,0 +1,226 @@
> +/** @file
> + CPUCFG 0x4 and 0x5 for Stable Counter frequency instance of Timer Library.
> +
> + Copyright (c) 2023, Loongson Technology Corporation Limited. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +#include <Base.h>
> +#include <Library/TimerLib.h>
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Register/LoongArch64/Cpucfg.h>
> +
> +/**
> + Calculate clock frequency using CPUCFG 0x4 and 0x5 registers.
> +
> + @param VOID.
> +
> + @return The frequency in Hz.
> +
> +**/
> +UINT32
> +EFIAPI
> +CalcConstFreq (
> + VOID
> + )
> +{
> + UINT32 BaseFreq;
> + UINT32 ClockMultiplier;
> + UINT32 ClockDivide;
> + CPUCFG_REG4_INFO_DATA CCFreq;
> + CPUCFG_REG5_INFO_DATA CpucfgReg5Data;
> + UINT32 StableTimerFreq;
> +
> + //
> + // Get the the crystal frequency corresponding to the constant
> + // frequency timer and the clock used by the timer.
> + //
> + AsmCpucfg (CPUCFG_REG4_INFO, &CCFreq.Uint32);
> +
> + //
> + // Get the multiplication factor and frequency division factor
> + // corresponding to the constant frequency timer and the clock
> + // used by the timer.
> + //
> + AsmCpucfg (CPUCFG_REG5_INFO, &CpucfgReg5Data.Uint32);
> +
> + BaseFreq = CCFreq.Bits.CC_FREQ;
> + ClockMultiplier = CpucfgReg5Data.Bits.CC_MUL & 0xFFFFULL;
> + ClockDivide = CpucfgReg5Data.Bits.CC_DIV & 0xFFFFULL;
> +
> + if (!BaseFreq || !ClockMultiplier || !ClockDivide) {
> + DEBUG ((DEBUG_ERROR, "LoongArch Stable Timer is not available in the CPU, hence this library cannot be used.\n"));
> + StableTimerFreq = 0;
> + ASSERT (0);
> + } else {
> + StableTimerFreq = (BaseFreq * ClockMultiplier / ClockDivide);
> + }
> +
> + return StableTimerFreq;
> +}
> +
> +/**
> + Stalls the CPU for at least the given number of microseconds.
> +
> + Stalls the CPU for the number of microseconds specified by MicroSeconds.
> +
> + @param MicroSeconds The minimum number of microseconds to delay.
> +
> + @return MicroSeconds
> +
> +**/
> +UINTN
> +EFIAPI
> +MicroSecondDelay (
> + IN UINTN MicroSeconds
> + )
> +{
> + UINTN Count, Ticks, Start, End;
> +
> + Count = (CalcConstFreq () * MicroSeconds) / 1000000;
> + Start = AsmReadStableCounter ();
> + End = Start + Count;
> +
> + do {
> + Ticks = AsmReadStableCounter ();
> + } while (Ticks < End);
> +
> + return MicroSeconds;
> +}
> +
> +/**
> + Stalls the CPU for at least the given number of nanoseconds.
> +
> + Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
> +
> + @param NanoSeconds The minimum number of nanoseconds to delay.
> +
> + @return NanoSeconds
> +
> +**/
> +UINTN
> +EFIAPI
> +NanoSecondDelay (
> + IN UINTN NanoSeconds
> + )
> +{
> + UINT32 MicroSeconds;
> +
> + if (NanoSeconds % 1000 == 0) {
> + MicroSeconds = NanoSeconds/1000;
> + } else {
> + MicroSeconds = NanoSeconds/1000 + 1;
> + }
> +
> + MicroSecondDelay (MicroSeconds);
> +
> + return NanoSeconds;
> +}
> +
> +/**
> + Retrieves the current value of a 64-bit free running performance counter.
> +
> + Retrieves the current value of a 64-bit free running performance counter. The
> + counter can either count up by 1 or count down by 1. If the physical
> + performance counter counts by a larger increment, then the counter values
> + must be translated. The properties of the counter can be retrieved from
> + GetPerformanceCounterProperties().
> +
> + @return The current value of the free running performance counter.
> +
> +**/
> +UINT64
> +EFIAPI
> +GetPerformanceCounter (
> + VOID
> + )
> +{
> + return AsmReadStableCounter ();
> +}
> +
> +/**
> + Retrieves the 64-bit frequency in Hz and the range of performance counter
> + values.
> +
> + If StartValue is not NULL, then the value that the performance counter starts
> + with immediately after is it rolls over is returned in StartValue. If
> + EndValue is not NULL, then the value that the performance counter end with
> + immediately before it rolls over is returned in EndValue. The 64-bit
> + frequency of the performance counter in Hz is always returned. If StartValue
> + is less than EndValue, then the performance counter counts up. If StartValue
> + is greater than EndValue, then the performance counter counts down. For
> + example, a 64-bit free running counter that counts up would have a StartValue
> + of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
> + that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
> +
> + @param StartValue The value the performance counter starts with when it
> + rolls over.
> + @param EndValue The value that the performance counter ends with before
> + it rolls over.
> +
> + @return The frequency in Hz.
> +
> +**/
> +UINT64
> +EFIAPI
> +GetPerformanceCounterProperties (
> + OUT UINT64 *StartValue OPTIONAL,
> + OUT UINT64 *EndValue OPTIONAL
> + )
> +{
> + if (StartValue != NULL) {
> + *StartValue = BIT2;
> + }
> +
> + if (EndValue != NULL) {
> + *EndValue = BIT48 - 1;
> + }
> +
> + return CalcConstFreq ();
> +}
> +
> +/**
> + Converts elapsed ticks of performance counter to time in nanoseconds.
> +
> + This function converts the elapsed ticks of running performance counter to
> + time value in unit of nanoseconds.
> +
> + @param Ticks The number of elapsed ticks of running performance counter.
> +
> + @return The elapsed time in nanoseconds.
> +
> +**/
> +UINT64
> +EFIAPI
> +GetTimeInNanoSecond (
> + IN UINT64 Ticks
> + )
> +{
> + UINT64 Frequency;
> + UINT64 NanoSeconds;
> + UINT64 Remainder;
> + INTN Shift;
> +
> + Frequency = GetPerformanceCounterProperties (NULL, NULL);
> +
> + //
> + // Ticks
> + // Time = --------- x 1,000,000,000
> + // Frequency
> + //
> + NanoSeconds = MultU64x32 (DivU64x64Remainder (Ticks, Frequency, &Remainder), 1000000000u);
> +
> + //
> + // Ensure (Remainder * 1,000,000,000) will not overflow 64-bit.
> + // Since 2^29 < 1,000,000,000 = 0x3B9ACA00 < 2^30, Remainder should < 2^(64-30) = 2^34,
> + // i.e. highest bit set in Remainder should <= 33.
> + //
> + Shift = MAX (0, HighBitSet64 (Remainder) - 33);
> + Remainder = RShiftU64 (Remainder, (UINTN)Shift);
> + Frequency = RShiftU64 (Frequency, (UINTN)Shift);
> + NanoSeconds += DivU64x64Remainder (MultU64x32 (Remainder, 1000000000u), Frequency, NULL);
> +
> + return NanoSeconds;
> +}
> diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
> index 074fd77461..8e34a9cd6b 100644
> --- a/UefiCpuPkg/UefiCpuPkg.dsc
> +++ b/UefiCpuPkg/UefiCpuPkg.dsc
> @@ -205,5 +205,8 @@
> UefiCpuPkg/CpuTimerDxeRiscV64/CpuTimerDxeRiscV64.inf
> UefiCpuPkg/CpuDxeRiscV64/CpuDxeRiscV64.inf
>
> +[Components.LOONGARCH64]
> + UefiCpuPkg/Library/BaseLoongArch64CpuTimerLib/BaseLoongArch64CpuTimerLib.inf
> +
> [BuildOptions]
> *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110819): https://edk2.groups.io/g/devel/message/110819
Mute This Topic: https://groups.io/mt/102438422/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 12234 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <1794EB01154A1CFD.12603@groups.io>]
* Re: [edk2-devel] [PATCH v2 15/30] EmbeddedPkg: Add PcdPrePiCpuIoSize width for LOONGARCH64
[not found] ` <1794EB01154A1CFD.12603@groups.io>
@ 2023-11-07 8:40 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-07 8:40 UTC (permalink / raw)
To: devel; +Cc: Leif Lindholm, Ard Biesheuvel, Abner Chang, Daniel Schaefer
[-- Attachment #1: Type: text/plain, Size: 1433 bytes --]
Hi Leif, Ard, Abner and Daniel,
Could you please to review this patch?
Thanks,
Chao
在 2023/11/6 11:29, Chao Li 写道:
> Added LoongArch64 architecture CPU IO width.
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Leif Lindholm<quic_llindhol@quicinc.com>
> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
> Cc: Abner Chang<abner.chang@amd.com>
> Cc: Daniel Schaefer<git@danielschaefer.me>
> Signed-off-by: Chao Li<lichao@loongson.cn>
> ---
> EmbeddedPkg/EmbeddedPkg.dec | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/EmbeddedPkg/EmbeddedPkg.dec b/EmbeddedPkg/EmbeddedPkg.dec
> index 341ef5e6a6..241d4f3acc 100644
> --- a/EmbeddedPkg/EmbeddedPkg.dec
> +++ b/EmbeddedPkg/EmbeddedPkg.dec
> @@ -165,6 +165,9 @@
> [PcdsFixedAtBuild.X64]
> gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
>
> +[PcdsFixedAtBuild.LOONGARCH64]
> + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16|UINT8|0x00000011
> +
> [PcdsFixedAtBuild.common, PcdsDynamic.common]
> #
> # Value to add to a host address to obtain a device address, using
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110823): https://edk2.groups.io/g/devel/message/110823
Mute This Topic: https://groups.io/mt/102439356/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 2934 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <1794EB0445E96DCB.26468@groups.io>]
* Re: [edk2-devel] [PATCH v2 16/30] ArmVirtPkg: Move PCD of FDT base address and FDT padding to OvmfPkg
[not found] ` <1794EB0445E96DCB.26468@groups.io>
@ 2023-11-07 8:41 ` Chao Li
0 siblings, 0 replies; 71+ messages in thread
From: Chao Li @ 2023-11-07 8:41 UTC (permalink / raw)
To: devel
Cc: Ard Biesheuvel, Leif Lindholm, Sami Mujawar, Gerd Hoffmann,
Jiewen Yao, Jordan Justen
[-- Attachment #1: Type: text/plain, Size: 15123 bytes --]
Hi Ard, Leif, Sami, Gerd and Jordan,
Could you please to review this patch?
Thanks,
Chao
在 2023/11/6 11:29, Chao Li 写道:
> Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
> to OvmfPkg for easier use by other architectures.
>
> Build-tested only (with "ArmVirtQemu.dsc").
>
> BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=4584
>
> Cc: Ard Biesheuvel<ardb+tianocore@kernel.org>
> Cc: Leif Lindholm<quic_llindhol@quicinc.com>
> Cc: Sami Mujawar<sami.mujawar@arm.com>
> Cc: Gerd Hoffmann<kraxel@redhat.com>
> Cc: Jiewen Yao<jiewen.yao@intel.com>
> Cc: Jordan Justen<jordan.l.justen@intel.com>
> Signed-off-by: Chao Li<lichao@loongson.cn>
> ---
> ArmVirtPkg/ArmVirtCloudHv.dsc | 2 +-
> ArmVirtPkg/ArmVirtKvmTool.dsc | 2 +-
> ArmVirtPkg/ArmVirtPkg.dec | 14 --------------
> ArmVirtPkg/ArmVirtQemu.dsc | 2 +-
> ArmVirtPkg/ArmVirtQemuKernel.dsc | 2 +-
> ArmVirtPkg/ArmVirtXen.dsc | 2 +-
> .../ArmVirtPsciResetSystemPeiLib.inf | 3 ++-
> .../CloudHvVirtMemInfoPeiLib.inf | 3 ++-
> .../DebugLibFdtPL011UartFlash.inf | 3 ++-
> .../EarlyFdt16550SerialPortHookLib.inf | 3 ++-
> .../EarlyFdtPL011SerialPortLib.inf | 3 ++-
> .../KvmtoolPlatformPeiLib.inf | 5 +++--
> .../Library/PlatformPeiLib/PlatformPeiLib.inf | 10 +++++-----
> .../QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf | 3 ++-
> .../PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 3 ++-
> OvmfPkg/OvmfPkg.dec | 15 +++++++++++++++
> 16 files changed, 42 insertions(+), 33 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirtCloudHv.dsc b/ArmVirtPkg/ArmVirtCloudHv.dsc
> index 2cb89ce10c..76c0d28544 100644
> --- a/ArmVirtPkg/ArmVirtCloudHv.dsc
> +++ b/ArmVirtPkg/ArmVirtCloudHv.dsc
> @@ -129,7 +129,7 @@
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>
> # initial location of the device tree blob passed by Cloud Hypervisor -- base of DRAM
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
> diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
> index f50d53bf15..cac4fe06d3 100644
> --- a/ArmVirtPkg/ArmVirtKvmTool.dsc
> +++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
> @@ -179,7 +179,7 @@
> # We are booting from RAM using the Linux kernel boot protocol,
> # x0 will point to the DTB image in memory.
> #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
> index 0f2d787327..2451644844 100644
> --- a/ArmVirtPkg/ArmVirtPkg.dec
> +++ b/ArmVirtPkg/ArmVirtPkg.dec
> @@ -42,20 +42,6 @@
> gArmVirtTokenSpaceGuid.PcdTpm2SupportEnabled|FALSE|BOOLEAN|0x00000004
>
> [PcdsFixedAtBuild, PcdsPatchableInModule]
> - #
> - # This is the physical address where the device tree is expected to be stored
> - # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
> - # can do a first pass over the device tree in the SEC phase to discover the
> - # UART base address.
> - #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x00000001
> -
> - #
> - # Padding in bytes to add to the device tree allocation, so that the DTB can
> - # be modified in place (default: 256 bytes)
> - #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x00000002
> -
> #
> # Binary representation of the GUID that determines the terminal type. The
> # size must be exactly 16 bytes. The default value corresponds to
> diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
> index 30e3cfc8b9..cf306cac08 100644
> --- a/ArmVirtPkg/ArmVirtQemu.dsc
> +++ b/ArmVirtPkg/ArmVirtQemu.dsc
> @@ -201,7 +201,7 @@
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
>
> # initial location of the device tree blob passed by QEMU -- base of DRAM
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
> index b50f8e84a3..c0d079e28d 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
> @@ -198,7 +198,7 @@
> # Define a default initial address for the device tree.
> # Ignored if x0 != 0 at entry.
> #
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
> index f0d15b823b..5809832e66 100644
> --- a/ArmVirtPkg/ArmVirtXen.dsc
> +++ b/ArmVirtPkg/ArmVirtXen.dsc
> @@ -115,7 +115,7 @@
> #
> gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
> gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
>
> gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> diff --git a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> index 3a65706e8d..79217d296d 100644
> --- a/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> +++ b/ArmVirtPkg/Library/ArmVirtPsciResetSystemPeiLib/ArmVirtPsciResetSystemPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmSmcLib
> @@ -36,4 +37,4 @@
> HobLib
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> index 666b5d9711..6df26ccd64 100644
> --- a/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> +++ b/ArmVirtPkg/Library/CloudHvVirtMemInfoLib/CloudHvVirtMemInfoPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmLib
> @@ -44,4 +45,4 @@
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFdSize
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> index 7870ca2ae4..f35a0913f0 100644
> --- a/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> +++ b/ArmVirtPkg/Library/DebugLibFdtPL011Uart/DebugLibFdtPL011UartFlash.inf
> @@ -30,6 +30,7 @@
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> BaseLib
> @@ -41,7 +42,7 @@
> PrintLib
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress # Flash.c
> gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue
> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
> gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> index 22aba53d9b..3e2303b7f4 100644
> --- a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> @@ -29,7 +29,8 @@
> ArmVirtPkg/ArmVirtPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> index f47692f06a..e677f1d9e7 100644
> --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
> @@ -28,9 +28,10 @@
> MdePkg/MdePkg.dec
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [Pcd]
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
>
> [FixedPcd]
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
> diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> index f201aee50c..78c9d9d764 100644
> --- a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> +++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> @@ -24,6 +24,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> DebugLib
> @@ -34,11 +35,11 @@
>
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>
> [Pcd]
> gArmTokenSpaceGuid.PcdFvBaseAddress
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
>
> [Guids]
> diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> index b867d8bb89..0584a53ee3 100644
> --- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> +++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
> @@ -41,16 +41,16 @@
>
> [FixedPcd]
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding
>
> [Pcd]
> gArmTokenSpaceGuid.PcdFvBaseAddress
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> - gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress ## SOMETIMES_PRODUCES
>
> [Ppis]
> - gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
> - gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
> + gOvmfTpmDiscoveredPpiGuid ## SOMETIMES_PRODUCES
> + gPeiTpmInitializationDonePpiGuid ## SOMETIMES_PRODUCES
>
> [Guids]
> gEarlyPL011BaseAddressGuid
> diff --git a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> index f045e39a41..76c3c5d3c8 100644
> --- a/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> +++ b/ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoPeiLib.inf
> @@ -26,6 +26,7 @@
> EmbeddedPkg/EmbeddedPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + OvmfPkg/OvmfPkg.dec
>
> [LibraryClasses]
> ArmLib
> @@ -44,4 +45,4 @@
> gArmTokenSpaceGuid.PcdSystemMemorySize
> gArmTokenSpaceGuid.PcdFdSize
> gArmTokenSpaceGuid.PcdFvSize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> index 7edf501808..691fc26350 100755
> --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> @@ -32,6 +32,7 @@
> MdePkg/MdePkg.dec
> MdeModulePkg/MdeModulePkg.dec
> EmbeddedPkg/EmbeddedPkg.dec
> + OvmfPkg/OvmfPkg.dec
> ArmPkg/ArmPkg.dec
> ArmPlatformPkg/ArmPlatformPkg.dec
> ArmVirtPkg/ArmVirtPkg.dec
> @@ -93,6 +94,6 @@
> [Pcd]
> gArmTokenSpaceGuid.PcdSystemMemoryBase
> gArmTokenSpaceGuid.PcdSystemMemorySize
> - gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> gArmTokenSpaceGuid.PcdFdBaseAddress
> gArmTokenSpaceGuid.PcdFvBaseAddress
> diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
> index e3861e5c1b..89091e8bf1 100644
> --- a/OvmfPkg/OvmfPkg.dec
> +++ b/OvmfPkg/OvmfPkg.dec
> @@ -481,6 +481,21 @@
> #
> gUefiOvmfPkgTokenSpaceGuid.PcdForceNoAcpi|0x0|BOOLEAN|0x69
>
> +[PcdsFixedAtBuild, PcdsPatchableInModule]
> + #
> + # This is the physical address where the device tree is expected to be stored
> + # upon first entry into UEFI. This needs to be a FixedAtBuild PCD, so that we
> + # can do a first pass over the device tree in the SEC phase to discover the
> + # UART base address.
> + #
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0|UINT64|0x6e
> +
> + #
> + # Padding in bytes to add to the device tree allocation, so that the DTB can
> + # be modified in place (default: 256 bytes)
> + #
> + gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeAllocationPadding|256|UINT32|0x6f
> +
> [PcdsFeatureFlag]
> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE|BOOLEAN|0x1c
> gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|FALSE|BOOLEAN|0x1d
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110824): https://edk2.groups.io/g/devel/message/110824
Mute This Topic: https://groups.io/mt/102439361/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 16036 bytes --]
^ permalink raw reply [flat|nested] 71+ messages in thread