* [edk2-devel] [Patch V2] UefiCpuPkg/MpInitLib: Enable execute disable bit.
@ 2023-11-10 12:36 Yuanhao Xie
0 siblings, 0 replies; only message in thread
From: Yuanhao Xie @ 2023-11-10 12:36 UTC (permalink / raw)
To: devel; +Cc: Yuanhao Xie, Eric Dong, Ray Ni, Rahul Kumar, Gerd Hoffmann
From: Yuanhao Xie <yuanhao.xie@intel.com>
This patch synchronizes the No-Execute bit in the IA32_EFER
register for the APs before the RestoreVolatileRegisters operation.
The commit 964a4f0, titled "Eliminate the second INIT-SIPI-SIPI
sequence," replaces the second INIT-SIPI-SIPI sequence with the BSP
calling the SwitchApContext function to initiate a specialized start-up
signal, waking up APs in the DXE instead of using INIT-SIPI-SIPI.
Due to this change, the logic for "Enable execute disable bit" in
MpFuncs.nasm is no longer executed. However, to ensure the proper setup
of the page table, it is necessary to synchronize the IA32_EFER.NXE for
APs before executing RestoreVolatileRegisters .
Based on SDM:
If IA32_EFER.NXE is set to 1, it signifies execute-disable, meaning
instruction fetches are not allowed from the 4-KByte page controlled by
this entry. Conversely, if it is set to 0, it is reserved.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.c | 17 +++++++++++++----
UefiCpuPkg/Library/MpInitLib/MpLib.h | 1 +
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 9a6ec5db5c..c7527f8662 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -910,11 +910,19 @@ DxeApEntryPoint (
CPU_MP_DATA *CpuMpData
)
{
- UINTN ProcessorNumber;
+ UINTN ProcessorNumber;
+ MSR_IA32_EFER_REGISTER EferMsr;
GetProcessorNumber (CpuMpData, &ProcessorNumber);
- RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
InterlockedIncrement ((UINT32 *)&CpuMpData->FinishedCount);
+
+ if (CpuMpData->EnableExecuteDisableForSwitchContext) {
+ EferMsr.Uint64 = AsmReadMsr64 (MSR_IA32_EFER);
+ EferMsr.Bits.NXE = 1;
+ AsmWriteMsr64 (MSR_IA32_EFER, EferMsr.Uint64);
+ }
+
+ RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
PlaceAPInMwaitLoopOrRunLoop (
CpuMpData->ApLoopMode,
CpuMpData->CpuData[ProcessorNumber].StartupApSignal,
@@ -2188,8 +2196,9 @@ MpInitLibInitialize (
if (MpHandOff->WaitLoopExecutionMode == sizeof (VOID *)) {
ASSERT (CpuMpData->ApLoopMode != ApInHltLoop);
- CpuMpData->FinishedCount = 0;
- CpuMpData->InitFlag = ApInitDone;
+ CpuMpData->FinishedCount = 0;
+ CpuMpData->InitFlag = ApInitDone;
+ CpuMpData->EnableExecuteDisableForSwitchContext = IsBspExecuteDisableEnabled ();
SaveCpuMpData (CpuMpData);
//
// In scenarios where both the PEI and DXE phases run in the same
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 763db4963d..af296f6ac0 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -270,6 +270,7 @@ struct _CPU_MP_DATA {
UINT64 TotalTime;
EFI_EVENT WaitEvent;
UINTN **FailedCpuList;
+ BOOLEAN EnableExecuteDisableForSwitchContext;
AP_INIT_STATE InitFlag;
BOOLEAN SwitchBspFlag;
--
2.39.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111035): https://edk2.groups.io/g/devel/message/111035
Mute This Topic: https://groups.io/mt/102505492/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2023-11-10 12:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-11-10 12:36 [edk2-devel] [Patch V2] UefiCpuPkg/MpInitLib: Enable execute disable bit Yuanhao Xie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox