[edk2-devel] [PATCH v4 19/37] UefiCpuPkg: Add MMIO method in CpuIo2Dxe

["Chao Li" <lichao@loongson.cn>]

CpuIo2Dxe only supports IO to access PCI IO. Some ARCH requires
MMIO to access PCI IO, add the MMIO access method in CpuIo2Dxe.

The MMIO methods depend on PcdPciIoTranslationIsEnabled and
PcdPciIoTransLation. The code is referenced from ArmPkg.

Build-tested only (with "OvmfPkgX64.dsc").

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584

Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
---
 UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.c   | 149 +++++++++++++++++++----------
 UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.h   |   2 +
 UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf |   8 +-
 UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.uni |   2 +
 4 files changed, 111 insertions(+), 50 deletions(-)

diff --git a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.c b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.c
index 87f4f805ca..cd31977af2 100644
--- a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.c
+++ b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.c
@@ -3,6 +3,8 @@
 
 Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
 Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
+Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
 
 SPDX-License-Identifier: BSD-2-Clause-Patent
 
@@ -149,7 +151,7 @@ CpuIoCheckParameter (
   //
   // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
   // can also be the maximum integer value supported by the CPU, this range
-  // check must be adjusted to avoid all oveflow conditions.
+  // check must be adjusted to avoid all overflow conditions.
   //
   // The following form of the range check is equivalent but assumes that
   // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
@@ -398,6 +400,18 @@ CpuIoServiceRead (
   EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
   UINT8                      *Uint8Buffer;
 
+  UINT8 EFIAPI  (*CpuIoRead8) (
+    UINTN
+    );
+
+  UINT16 EFIAPI  (*CpuIoRead16) (
+    UINTN
+    );
+
+  UINT32 EFIAPI  (*CpuIoRead32) (
+    UINTN
+    );
+
   Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
   if (EFI_ERROR (Status)) {
     return Status;
@@ -410,37 +424,48 @@ CpuIoServiceRead (
   OutStride      = mOutStride[Width];
   OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
 
-  //
-  // Fifo operations supported for (mInStride[Width] == 0)
-  //
-  if (InStride == 0) {
-    switch (OperationWidth) {
-      case EfiCpuIoWidthUint8:
-        IoReadFifo8 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      case EfiCpuIoWidthUint16:
-        IoReadFifo16 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      case EfiCpuIoWidthUint32:
-        IoReadFifo32 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      default:
-        //
-        // The CpuIoCheckParameter call above will ensure that this
-        // path is not taken.
-        //
-        ASSERT (FALSE);
-        break;
+  if (FeaturePcdGet (PcdPciIoTranslationIsEnabled) == FALSE) {
+    //
+    // Fifo operations supported for (mInStride[Width] == 0)
+    //
+    if (InStride == 0) {
+      switch (OperationWidth) {
+        case EfiCpuIoWidthUint8:
+          IoReadFifo8 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        case EfiCpuIoWidthUint16:
+          IoReadFifo16 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        case EfiCpuIoWidthUint32:
+          IoReadFifo32 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        default:
+          //
+          // The CpuIoCheckParameter call above will ensure that this
+          // path is not taken.
+          //
+          ASSERT (FALSE);
+          break;
+      }
     }
+
+    CpuIoRead8  = IoRead8;
+    CpuIoRead16 = IoRead16;
+    CpuIoRead32 = IoRead32;
+  } else {
+    Address    += PcdGet64 (PcdPciIoTranslation);
+    CpuIoRead8  = MmioRead8;
+    CpuIoRead16 = MmioRead16;
+    CpuIoRead32 = MmioRead32;
   }
 
   for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
     if (OperationWidth == EfiCpuIoWidthUint8) {
-      *Uint8Buffer = IoRead8 ((UINTN)Address);
+      *Uint8Buffer = CpuIoRead8 ((UINTN)Address);
     } else if (OperationWidth == EfiCpuIoWidthUint16) {
-      *((UINT16 *)Uint8Buffer) = IoRead16 ((UINTN)Address);
+      *((UINT16 *)Uint8Buffer) = CpuIoRead16 ((UINTN)Address);
     } else if (OperationWidth == EfiCpuIoWidthUint32) {
-      *((UINT32 *)Uint8Buffer) = IoRead32 ((UINTN)Address);
+      *((UINT32 *)Uint8Buffer) = CpuIoRead32 ((UINTN)Address);
     }
   }
 
@@ -502,6 +527,21 @@ CpuIoServiceWrite (
   EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
   UINT8                      *Uint8Buffer;
 
+  UINT8 EFIAPI  (*CpuIoWrite8) (
+    UINTN,
+    UINT8
+    );
+
+  UINT16 EFIAPI  (*CpuIoWrite16) (
+    UINTN,
+    UINT16
+    );
+
+  UINT32 EFIAPI  (*CpuIoWrite32) (
+    UINTN,
+    UINT32
+    );
+
   //
   // Make sure the parameters are valid
   //
@@ -517,37 +557,48 @@ CpuIoServiceWrite (
   OutStride      = mOutStride[Width];
   OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
 
-  //
-  // Fifo operations supported for (mInStride[Width] == 0)
-  //
-  if (InStride == 0) {
-    switch (OperationWidth) {
-      case EfiCpuIoWidthUint8:
-        IoWriteFifo8 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      case EfiCpuIoWidthUint16:
-        IoWriteFifo16 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      case EfiCpuIoWidthUint32:
-        IoWriteFifo32 ((UINTN)Address, Count, Buffer);
-        return EFI_SUCCESS;
-      default:
-        //
-        // The CpuIoCheckParameter call above will ensure that this
-        // path is not taken.
-        //
-        ASSERT (FALSE);
-        break;
+  if (FeaturePcdGet (PcdPciIoTranslationIsEnabled) == FALSE) {
+    //
+    // Fifo operations supported for (mInStride[Width] == 0)
+    //
+    if (InStride == 0) {
+      switch (OperationWidth) {
+        case EfiCpuIoWidthUint8:
+          IoWriteFifo8 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        case EfiCpuIoWidthUint16:
+          IoWriteFifo16 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        case EfiCpuIoWidthUint32:
+          IoWriteFifo32 ((UINTN)Address, Count, Buffer);
+          return EFI_SUCCESS;
+        default:
+          //
+          // The CpuIoCheckParameter call above will ensure that this
+          // path is not taken.
+          //
+          ASSERT (FALSE);
+          break;
+      }
     }
+
+    CpuIoWrite8  = IoWrite8;
+    CpuIoWrite16 = IoWrite16;
+    CpuIoWrite32 = IoWrite32;
+  } else {
+    Address     += PcdGet64 (PcdPciIoTranslation);
+    CpuIoWrite8  = MmioWrite8;
+    CpuIoWrite16 = MmioWrite16;
+    CpuIoWrite32 = MmioWrite32;
   }
 
   for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
     if (OperationWidth == EfiCpuIoWidthUint8) {
-      IoWrite8 ((UINTN)Address, *Uint8Buffer);
+      CpuIoWrite8 ((UINTN)Address, *Uint8Buffer);
     } else if (OperationWidth == EfiCpuIoWidthUint16) {
-      IoWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+      CpuIoWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
     } else if (OperationWidth == EfiCpuIoWidthUint32) {
-      IoWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+      CpuIoWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
     }
   }
 
diff --git a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.h b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.h
index 7ebde0759b..5256a583e1 100644
--- a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.h
+++ b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.h
@@ -2,6 +2,8 @@
   Internal include file for the CPU I/O 2 Protocol.
 
 Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
 SPDX-License-Identifier: BSD-2-Clause-Patent
 
 **/
diff --git a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
index 499258491f..271c47371b 100644
--- a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+++ b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
@@ -3,6 +3,8 @@
 #
 # Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
 # Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
 #
 # SPDX-License-Identifier: BSD-2-Clause-Patent
 #
@@ -20,7 +22,7 @@
 #
 # The following information is for reference only and not required by the build tools.
 #
-#  VALID_ARCHITECTURES           = IA32 X64 EBC
+#  VALID_ARCHITECTURES           = IA32 X64 EBC ARM AARCH64 LOONGARCH64
 #
 
 [Sources]
@@ -37,6 +39,10 @@
   IoLib
   UefiBootServicesTableLib
 
+[Pcd]
+  gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslationIsEnabled
+  gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation
+
 [Protocols]
   gEfiCpuIo2ProtocolGuid                         ## PRODUCES
 
diff --git a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.uni b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.uni
index 8d4e5dd6b4..14a36ff888 100644
--- a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.uni
+++ b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.uni
@@ -4,6 +4,8 @@
 // Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
 //
 // Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+// Copyright (c) 2023 Loongson Technology Corporation Limited. All rights reserved.<BR>
 //
 // SPDX-License-Identifier: BSD-2-Clause-Patent
 //
-- 
2.27.0



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#112410): https://edk2.groups.io/g/devel/message/112410
Mute This Topic: https://groups.io/mt/103129115/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-