[edk2-devel] [PATCH 1/3] ArmPkg: Update GenericWatchdogDxe to allow setting full 48-bit offset

["Rebecca Cran via groups.io" <rebecca=os.amperecomputing.com@groups.io>]

The generic watchdog offset register is 48 bits wide, and can be set by
performing two 32-bit writes.

Add support for writing the high 16 bits of the offset register and
update the signature of the WatchdogWriteOffsetRegister function to take
a UINT64 value.

Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
---
 ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h    |  4 +++-
 ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c | 14 +++++++++-----
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
index 9bc3bf47047c..504bc4cacb33 100644
--- a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
+++ b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
@@ -1,5 +1,6 @@
 /** @file
 *
+*  Copyright (c) 2023, Ampere Computing LLC. All rights reserved.<BR>
 *  Copyright (c) 2013-2017, ARM Limited. All rights reserved.
 *
 *  SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -14,7 +15,8 @@
 
 // Control Frame:
 #define GENERIC_WDOG_CONTROL_STATUS_REG      ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x000)
-#define GENERIC_WDOG_OFFSET_REG              ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x008)
+#define GENERIC_WDOG_OFFSET_REG_LOW          ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x008)
+#define GENERIC_WDOG_OFFSET_REG_HIGH         ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x00C)
 #define GENERIC_WDOG_COMPARE_VALUE_REG_LOW   ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x010)
 #define GENERIC_WDOG_COMPARE_VALUE_REG_HIGH  ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x014)
 
diff --git a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
index 66c6c37c08b0..05df101d5f4b 100644
--- a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
+++ b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
@@ -1,5 +1,6 @@
 /** @file
 *
+*  Copyright (c) 2023, Ampere Computing LLC. All rights reserved.<BR>
 *  Copyright (c) 2013-2018, ARM Limited. All rights reserved.
 *
 *  SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -35,16 +36,19 @@ STATIC UINTN  mTimerFrequencyHz = 0;
    It is therefore stored here. 0 means the timer is not running. */
 STATIC UINT64  mNumTimerTicks = 0;
 
+#define MAX_UINT48  0xFFFFFFFFFFFFULL
+
 STATIC EFI_HARDWARE_INTERRUPT2_PROTOCOL  *mInterruptProtocol;
 STATIC EFI_WATCHDOG_TIMER_NOTIFY         mWatchdogNotify;
 
 STATIC
 VOID
 WatchdogWriteOffsetRegister (
-  UINT32  Value
+  UINT64  Value
   )
 {
-  MmioWrite32 (GENERIC_WDOG_OFFSET_REG, Value);
+  MmioWrite32 (GENERIC_WDOG_OFFSET_REG_LOW, Value & MAX_UINT32);
+  MmioWrite32 (GENERIC_WDOG_OFFSET_REG_HIGH, (Value >> 32) & MAX_UINT32);
 }
 
 STATIC
@@ -211,17 +215,17 @@ WatchdogSetTimerPeriod (
   /* If the number of required ticks is greater than the max the watchdog's
      offset register (WOR) can hold, we need to manually compute and set
      the compare register (WCV) */
-  if (mNumTimerTicks > MAX_UINT32) {
+  if (mNumTimerTicks > MAX_UINT48) {
     /* We need to enable the watchdog *before* writing to the compare register,
        because enabling the watchdog causes an "explicit refresh", which
        clobbers the compare register (WCV). In order to make sure this doesn't
        trigger an interrupt, set the offset to max. */
-    WatchdogWriteOffsetRegister (MAX_UINT32);
+    WatchdogWriteOffsetRegister (MAX_UINT48);
     WatchdogEnable ();
     SystemCount = ArmGenericTimerGetSystemCount ();
     WatchdogWriteCompareRegister (SystemCount + mNumTimerTicks);
   } else {
-    WatchdogWriteOffsetRegister ((UINT32)mNumTimerTicks);
+    WatchdogWriteOffsetRegister (mNumTimerTicks);
     WatchdogEnable ();
   }
 
-- 
2.34.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#113106): https://edk2.groups.io/g/devel/message/113106
Mute This Topic: https://groups.io/mt/103510103/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-