public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Rebecca Cran via groups.io" <rebecca=os.amperecomputing.com@groups.io>
To: Leif Lindholm <quic_llindhol@quicinc.com>,
	Ard Biesheuvel <ardb+tianocore@kernel.org>,
	Sami Mujawar <sami.mujawar@arm.com>
Cc: Rebecca Cran <rebecca@os.amperecomputing.com>, devel@edk2.groups.io
Subject: [edk2-devel] [PATCH v2 1/3] ArmPkg: Update GenericWatchdogDxe to allow setting full 48-bit offset
Date: Thu,  4 Jan 2024 21:35:06 -0700	[thread overview]
Message-ID: <20240105043508.461417-2-rebecca@os.amperecomputing.com> (raw)
In-Reply-To: <20240105043508.461417-1-rebecca@os.amperecomputing.com>

The generic watchdog offset register is 48 bits wide, and can be set by
performing two 32-bit writes.

Add support for writing the high 16 bits of the offset register and
update the signature of the WatchdogWriteOffsetRegister function to take
a UINT64 value.

Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
---
 ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h    |  6 +++++-
 ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c | 14 +++++++++-----
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
index 9bc3bf47047c..2a0634e7e9f1 100644
--- a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
+++ b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h
@@ -1,9 +1,12 @@
 /** @file
 *
+*  Copyright (c) 2023, Ampere Computing LLC. All rights reserved.<BR>
 *  Copyright (c) 2013-2017, ARM Limited. All rights reserved.
 *
 *  SPDX-License-Identifier: BSD-2-Clause-Patent
 *
+*  See Generic Watchdog specification in Arm Base System Architecture 1.0C:
+*  https://developer.arm.com/documentation/den0094/c/
 **/
 
 #ifndef GENERIC_WATCHDOG_H_
@@ -14,7 +17,8 @@
 
 // Control Frame:
 #define GENERIC_WDOG_CONTROL_STATUS_REG      ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x000)
-#define GENERIC_WDOG_OFFSET_REG              ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x008)
+#define GENERIC_WDOG_OFFSET_REG_LOW          ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x008)
+#define GENERIC_WDOG_OFFSET_REG_HIGH         ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x00C)
 #define GENERIC_WDOG_COMPARE_VALUE_REG_LOW   ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x010)
 #define GENERIC_WDOG_COMPARE_VALUE_REG_HIGH  ((UINTN)FixedPcdGet64 (PcdGenericWatchdogControlBase) + 0x014)
 
diff --git a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
index 66c6c37c08b0..f8c39458a53a 100644
--- a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
+++ b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
@@ -1,5 +1,6 @@
 /** @file
 *
+*  Copyright (c) 2023, Ampere Computing LLC. All rights reserved.<BR>
 *  Copyright (c) 2013-2018, ARM Limited. All rights reserved.
 *
 *  SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -35,16 +36,19 @@ STATIC UINTN  mTimerFrequencyHz = 0;
    It is therefore stored here. 0 means the timer is not running. */
 STATIC UINT64  mNumTimerTicks = 0;
 
+#define MAX_UINT48  0xFFFFFFFFFFFFULL
+
 STATIC EFI_HARDWARE_INTERRUPT2_PROTOCOL  *mInterruptProtocol;
 STATIC EFI_WATCHDOG_TIMER_NOTIFY         mWatchdogNotify;
 
 STATIC
 VOID
 WatchdogWriteOffsetRegister (
-  UINT32  Value
+  UINT64  Value
   )
 {
-  MmioWrite32 (GENERIC_WDOG_OFFSET_REG, Value);
+  MmioWrite32 (GENERIC_WDOG_OFFSET_REG_LOW, Value & MAX_UINT32);
+  MmioWrite32 (GENERIC_WDOG_OFFSET_REG_HIGH, (Value >> 32) & MAX_UINT16);
 }
 
 STATIC
@@ -211,17 +215,17 @@ WatchdogSetTimerPeriod (
   /* If the number of required ticks is greater than the max the watchdog's
      offset register (WOR) can hold, we need to manually compute and set
      the compare register (WCV) */
-  if (mNumTimerTicks > MAX_UINT32) {
+  if (mNumTimerTicks > MAX_UINT48) {
     /* We need to enable the watchdog *before* writing to the compare register,
        because enabling the watchdog causes an "explicit refresh", which
        clobbers the compare register (WCV). In order to make sure this doesn't
        trigger an interrupt, set the offset to max. */
-    WatchdogWriteOffsetRegister (MAX_UINT32);
+    WatchdogWriteOffsetRegister (MAX_UINT48);
     WatchdogEnable ();
     SystemCount = ArmGenericTimerGetSystemCount ();
     WatchdogWriteCompareRegister (SystemCount + mNumTimerTicks);
   } else {
-    WatchdogWriteOffsetRegister ((UINT32)mNumTimerTicks);
+    WatchdogWriteOffsetRegister (mNumTimerTicks);
     WatchdogEnable ();
   }
 
-- 
2.34.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#113210): https://edk2.groups.io/g/devel/message/113210
Mute This Topic: https://groups.io/mt/103537818/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-



  reply	other threads:[~2024-01-05  4:37 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-05  4:35 [edk2-devel] [PATCH v2 0/3] ArmPkg: GenericWatchdogDxe fixes and improvements Rebecca Cran via groups.io
2024-01-05  4:35 ` Rebecca Cran via groups.io [this message]
2024-01-05  4:35 ` [edk2-devel] [PATCH v2 2/3] ArmPkg: Introduce global mTimerPeriod and remove calculation Rebecca Cran via groups.io
2024-01-05  4:35 ` [edk2-devel] [PATCH v2 3/3] ArmPkg: Disable watchdog interaction after exiting boot services Rebecca Cran via groups.io

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240105043508.461417-2-rebecca@os.amperecomputing.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox