* [edk2-devel] [PATCH] Platform/RaspberryPi: Enable FPDT data on RPi4
@ 2024-01-11 0:04 Jeremy Linton
0 siblings, 0 replies; only message in thread
From: Jeremy Linton @ 2024-01-11 0:04 UTC (permalink / raw)
To: devel; +Cc: ardb+tianocore, quic_llindhol, Jeremy Linton
FPDT data gives an approximation of how long each stage
of the firmware boot takes. Since the RPi has a generic
timer this is a fairly accurate timestamp from the point
where edk2 takes over, which is a few ms from actual
power on. While its not perfect its sufficiently granular
that a command like `systemd-analyze` shows the debug boot
to be quite slow.
Ex:
[root@rpi4 ~]# systemd-analyze
Startup finished in 24.313s (firmware) + 7.771s (loader) + 2.442s (kernel) + 5.810s (initrd) + 20.371s (userspace) = 1min 708ms
multi-user.target reached after 17.343s in userspace.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/RPi4/RPi4.dsc | 28 ++++++++++++++++++++++++++--
Platform/RaspberryPi/RPi4/RPi4.fdf | 7 +++++++
2 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index 170e45ae7e..e9ca9463ce 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -69,7 +69,8 @@
BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
- ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+
PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
@@ -279,13 +280,25 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
gEfiMdePkgTokenSpaceGuid.PcdUgaConsumeSupport|FALSE
+ ## Indicates if S3 performance data will be supported in ACPI FPDT table.
+ # TRUE - S3 performance data will be supported in ACPI FPDT table.
+ # FALSE - S3 performance data will not be supported in ACPI FPDT table.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|FALSE
+
[PcdsFixedAtBuild.common]
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
- gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
+ #define PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED 0x00000001
+ #define PERF_CORE_START_IMAGE 0x0002
+ #define PERF_CORE_LOAD_IMAGE 0x0004
+ #define PERF_CORE_DB_SUPPORT 0x0008
+ #define PERF_CORE_DB_START 0x0010
+ #define PERF_CORE_DB_STOP 0x0020
+ #define PERF_GENERAL_TYPE 0x0040
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x1
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
@@ -324,6 +337,7 @@
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|$(DEBUG_PRINT_ERROR_LEVEL)
gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x20000000
#
# Optional feature to help prevent EFI memory map fragments
@@ -812,6 +826,16 @@
Silicon/Broadcom/Drivers/I2cDxe/I2cDxe.inf
+ #
+ # Firmware Performance Data Table (FPDT)
+ #
+ MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+ MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableDxe/FirmwarePerformanceDxe.inf {
+ <LibraryClasses>
+ LockBoxLib|MdeModulePkg/Library/LockBoxNullLib/LockBoxNullLib.inf
+ }
+
+ #
# UEFI application (Shell Embedded Boot Loader)
#
ShellPkg/Application/Shell/Shell.inf {
diff --git a/Platform/RaspberryPi/RPi4/RPi4.fdf b/Platform/RaspberryPi/RPi4/RPi4.fdf
index 989d99a49f..321639fc64 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.fdf
+++ b/Platform/RaspberryPi/RPi4/RPi4.fdf
@@ -326,6 +326,13 @@ READ_LOCK_STATUS = TRUE
#
INF Platform/RaspberryPi/Drivers/LogoDxe/LogoDxe.inf
+ #
+ # Firmware Performance Data Table (FPDT)
+ #
+ INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+ INF MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableDxe/FirmwarePerformanceDxe.inf
+
+
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
--
2.43.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#113564): https://edk2.groups.io/g/devel/message/113564
Mute This Topic: https://groups.io/mt/103653104/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-01-11 0:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-11 0:04 [edk2-devel] [PATCH] Platform/RaspberryPi: Enable FPDT data on RPi4 Jeremy Linton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox