From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: devel@edk2.groups.io
Cc: Liming Gao <gaoliming@byosoft.com.cn>,
Aaron Li <aaron.li@intel.com>, Liu Yun <yun.y.liu@intel.com>,
Andrew Fish <afish@apple.com>
Subject: [edk2-devel] [Patch v2 1/1] MdeModulePkg/Core/Dxe: Set MemoryTypeInfo bin range from HOB
Date: Tue, 23 Jan 2024 12:24:24 -0800 [thread overview]
Message-ID: <20240123202424.1960-1-michael.d.kinney@intel.com> (raw)
Provide an optional method for PEI to declare a specific address
range to use for the Memory Type Information bins. The current
algorithm uses heuristics that tends to place the Memory Type
Information bins in the same location, but memory configuration
changes across boots or algorithm changes across a firmware
updates could potentially change the Memory Type Information bin
location.
If the HOB List contains a Resource Descriptor HOB that
describes tested system memory and has an Owner GUID of
gEfiMemoryTypeInformationGuid, then use the address range
described by the Resource Descriptor HOB as the preferred
location of the Memory Type Information bins. If this HOB is
not detected, then the current behavior is preserved.
The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is ignored for the following conditions:
* The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is smaller than the Memory Type Information bins.
* The HOB list contains more than one Resource Descriptor HOB
with an owner GUID of gEfiMemoryTypeInformationGuid.
* The Resource Descriptor HOB with an Owner GUID of
gEfiMemoryTypeInformationGuid is the same Resource Descriptor
HOB that that describes the PHIT memory range.
Update the DxeMain initialization order to initialize GCD
services before any runtime allocations are performed. This
is required to prevent runtime data fragmentation when the
UEFI System Table and UEFI Runtime Service Table is allocated.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
MdeModulePkg/Core/Dxe/DxeMain.h | 6 ++
MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c | 23 +++---
MdeModulePkg/Core/Dxe/Gcd/Gcd.c | 72 ++++++++++++++++-
MdeModulePkg/Core/Dxe/Mem/Page.c | 101 ++++++++++++++++++++++++
4 files changed, 190 insertions(+), 12 deletions(-)
diff --git a/MdeModulePkg/Core/Dxe/DxeMain.h b/MdeModulePkg/Core/Dxe/DxeMain.h
index 86a7be2f5188..53e26703f8c7 100644
--- a/MdeModulePkg/Core/Dxe/DxeMain.h
+++ b/MdeModulePkg/Core/Dxe/DxeMain.h
@@ -277,6 +277,12 @@ CoreInitializePool (
VOID
);
+VOID
+CoreSetMemoryTypeInformationRange (
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length
+ );
+
/**
Called to initialize the memory map and add descriptors to
the current descriptor list.
diff --git a/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c b/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c
index 0e0f9769b99d..17d510a287e5 100644
--- a/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c
+++ b/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c
@@ -276,6 +276,18 @@ DxeMain (
MemoryProfileInit (HobStart);
+ //
+ // Start the Image Services.
+ //
+ Status = CoreInitializeImageServices (HobStart);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Initialize the Global Coherency Domain Services
+ //
+ Status = CoreInitializeGcdServices (&HobStart, MemoryBaseAddress, MemoryLength);
+ ASSERT_EFI_ERROR (Status);
+
//
// Allocate the EFI System Table and EFI Runtime Service Table from EfiRuntimeServicesData
// Use the templates to initialize the contents of the EFI System Table and EFI Runtime Services Table
@@ -289,16 +301,9 @@ DxeMain (
gDxeCoreST->RuntimeServices = gDxeCoreRT;
//
- // Start the Image Services.
+ // Update DXE Core Loaded Image Protocol with allocated UEFI System Table
//
- Status = CoreInitializeImageServices (HobStart);
- ASSERT_EFI_ERROR (Status);
-
- //
- // Initialize the Global Coherency Domain Services
- //
- Status = CoreInitializeGcdServices (&HobStart, MemoryBaseAddress, MemoryLength);
- ASSERT_EFI_ERROR (Status);
+ gDxeCoreLoadedImage->SystemTable = gDxeCoreST;
//
// Call constructor for all libraries
diff --git a/MdeModulePkg/Core/Dxe/Gcd/Gcd.c b/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
index 792cd2e0af23..c450d1bf2531 100644
--- a/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
+++ b/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
@@ -2238,6 +2238,8 @@ CoreInitializeMemoryServices (
EFI_HOB_HANDOFF_INFO_TABLE *PhitHob;
EFI_HOB_RESOURCE_DESCRIPTOR *ResourceHob;
EFI_HOB_RESOURCE_DESCRIPTOR *PhitResourceHob;
+ EFI_HOB_RESOURCE_DESCRIPTOR *MemoryTypeInformationResourceHob;
+ UINTN Count;
EFI_PHYSICAL_ADDRESS BaseAddress;
UINT64 Length;
UINT64 Attributes;
@@ -2289,12 +2291,47 @@ CoreInitializeMemoryServices (
//
// See if a Memory Type Information HOB is available
//
- GuidHob = GetFirstGuidHob (&gEfiMemoryTypeInformationGuid);
+ MemoryTypeInformationResourceHob = NULL;
+ GuidHob = GetFirstGuidHob (&gEfiMemoryTypeInformationGuid);
if (GuidHob != NULL) {
EfiMemoryTypeInformation = GET_GUID_HOB_DATA (GuidHob);
DataSize = GET_GUID_HOB_DATA_SIZE (GuidHob);
if ((EfiMemoryTypeInformation != NULL) && (DataSize > 0) && (DataSize <= (EfiMaxMemoryType + 1) * sizeof (EFI_MEMORY_TYPE_INFORMATION))) {
CopyMem (&gMemoryTypeInformation, EfiMemoryTypeInformation, DataSize);
+
+ //
+ // Look for Resource Descriptor HOB with a ResourceType of System Memory
+ // and an Owner GUID of gEfiMemoryTypeInformationGuid. If more than 1 is
+ // found, then set MemoryTypeInformationResourceHob to NULL.
+ //
+ Count = 0;
+ for (Hob.Raw = *HobStart; !END_OF_HOB_LIST (Hob); Hob.Raw = GET_NEXT_HOB (Hob)) {
+ if (GET_HOB_TYPE (Hob) != EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
+ continue;
+ }
+
+ ResourceHob = Hob.ResourceDescriptor;
+ if (!CompareGuid (&ResourceHob->Owner, &gEfiMemoryTypeInformationGuid)) {
+ continue;
+ }
+
+ Count++;
+ if (ResourceHob->ResourceType != EFI_RESOURCE_SYSTEM_MEMORY) {
+ continue;
+ }
+
+ if ((ResourceHob->ResourceAttribute & MEMORY_ATTRIBUTE_MASK) != TESTED_MEMORY_ATTRIBUTES) {
+ continue;
+ }
+
+ if (ResourceHob->ResourceLength >= CalculateTotalMemoryBinSizeNeeded ()) {
+ MemoryTypeInformationResourceHob = ResourceHob;
+ }
+ }
+
+ if (Count > 1) {
+ MemoryTypeInformationResourceHob = NULL;
+ }
}
}
@@ -2344,6 +2381,15 @@ CoreInitializeMemoryServices (
PhitResourceHob = ResourceHob;
Found = TRUE;
+ //
+ // If a Memory Type Information Resource HOB was found and is the same
+ // Resource HOB that describes the PHIT HOB, then ignore the Memory Type
+ // Information Resource HOB.
+ //
+ if (MemoryTypeInformationResourceHob == PhitResourceHob) {
+ MemoryTypeInformationResourceHob = NULL;
+ }
+
//
// Compute range between PHIT EfiMemoryTop and the end of the Resource Descriptor HOB
//
@@ -2387,8 +2433,9 @@ CoreInitializeMemoryServices (
if (Length < MinimalMemorySizeNeeded) {
//
// Search all the resource descriptor HOBs from the highest possible addresses down for a memory
- // region that is big enough to initialize the DXE core. Always skip the PHIT Resource HOB.
- // The max address must be within the physically addressible range for the processor.
+ // region that is big enough to initialize the DXE core. Always skip the PHIT Resource HOB
+ // and the Memory Type Information Resource HOB. The max address must be within the physically
+ // addressable range for the processor.
//
HighAddress = MAX_ALLOC_ADDRESS;
for (Hob.Raw = *HobStart; !END_OF_HOB_LIST (Hob); Hob.Raw = GET_NEXT_HOB (Hob)) {
@@ -2399,6 +2446,13 @@ CoreInitializeMemoryServices (
continue;
}
+ //
+ // Skip the Resource Descriptor HOB that contains Memory Type Information bins
+ //
+ if (Hob.ResourceDescriptor == MemoryTypeInformationResourceHob) {
+ continue;
+ }
+
//
// Skip all HOBs except Resource Descriptor HOBs
//
@@ -2466,6 +2520,18 @@ CoreInitializeMemoryServices (
Capabilities = CoreConvertResourceDescriptorHobAttributesToCapabilities (EfiGcdMemoryTypeSystemMemory, Attributes);
}
+ if (MemoryTypeInformationResourceHob != NULL) {
+ //
+ // If a Memory Type Information Resource HOB was found, then use the address
+ // range of the Memory Type Information Resource HOB as the preferred
+ // address range for the Memory Type Information bins.
+ //
+ CoreSetMemoryTypeInformationRange (
+ MemoryTypeInformationResourceHob->PhysicalStart,
+ MemoryTypeInformationResourceHob->ResourceLength
+ );
+ }
+
//
// Declare the very first memory region, so the EFI Memory Services are available.
//
diff --git a/MdeModulePkg/Core/Dxe/Mem/Page.c b/MdeModulePkg/Core/Dxe/Mem/Page.c
index 6497af573353..458c62090265 100644
--- a/MdeModulePkg/Core/Dxe/Mem/Page.c
+++ b/MdeModulePkg/Core/Dxe/Mem/Page.c
@@ -532,6 +532,107 @@ CoreLoadingFixedAddressHook (
return;
}
+/**
+ Sets the preferred memory range to use for the Memory Type Information bins.
+ This service must be called before fist call to CoreAddMemoryDescriptor().
+
+ If the location of the Memory Type Information bins has already been
+ established or the size of the range provides is smaller than all the
+ Memory Type Information bins, then the range provides is not used.
+
+ @param Start The start address of the Memory Type Information range.
+ @param Length The size, in bytes, of the Memory Type Information range.
+**/
+VOID
+CoreSetMemoryTypeInformationRange (
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length
+ )
+{
+ EFI_PHYSICAL_ADDRESS Top;
+ EFI_MEMORY_TYPE Type;
+ UINTN Index;
+ UINTN Size;
+
+ //
+ // Return if Memory Type Information bin locations have already been set
+ //
+ if (mMemoryTypeInformationInitialized) {
+ return;
+ }
+
+ //
+ // Return if size of the Memory Type Information bins is greater than Length
+ //
+ Size = 0;
+ for (Index = 0; gMemoryTypeInformation[Index].Type != EfiMaxMemoryType; Index++) {
+ //
+ // Make sure the memory type in the gMemoryTypeInformation[] array is valid
+ //
+ Type = (EFI_MEMORY_TYPE)(gMemoryTypeInformation[Index].Type);
+ if ((UINT32)Type > EfiMaxMemoryType) {
+ continue;
+ }
+
+ Size += EFI_PAGES_TO_SIZE (gMemoryTypeInformation[Index].NumberOfPages);
+ }
+
+ if (Size > Length) {
+ return;
+ }
+
+ //
+ // Loop through each memory type in the order specified by the
+ // gMemoryTypeInformation[] array
+ //
+ Top = Start + Length;
+ for (Index = 0; gMemoryTypeInformation[Index].Type != EfiMaxMemoryType; Index++) {
+ //
+ // Make sure the memory type in the gMemoryTypeInformation[] array is valid
+ //
+ Type = (EFI_MEMORY_TYPE)(gMemoryTypeInformation[Index].Type);
+ if ((UINT32)Type > EfiMaxMemoryType) {
+ continue;
+ }
+
+ if (gMemoryTypeInformation[Index].NumberOfPages != 0) {
+ mMemoryTypeStatistics[Type].MaximumAddress = Top - 1;
+ Top -= EFI_PAGES_TO_SIZE (gMemoryTypeInformation[Index].NumberOfPages);
+ mMemoryTypeStatistics[Type].BaseAddress = Top;
+
+ //
+ // If the current base address is the lowest address so far, then update
+ // the default maximum address
+ //
+ if (mMemoryTypeStatistics[Type].BaseAddress < mDefaultMaximumAddress) {
+ mDefaultMaximumAddress = mMemoryTypeStatistics[Type].BaseAddress - 1;
+ }
+
+ mMemoryTypeStatistics[Type].NumberOfPages = gMemoryTypeInformation[Index].NumberOfPages;
+ gMemoryTypeInformation[Index].NumberOfPages = 0;
+ }
+ }
+
+ //
+ // If the number of pages reserved for a memory type is 0, then all
+ // allocations for that type should be in the default range.
+ //
+ for (Type = (EFI_MEMORY_TYPE)0; Type < EfiMaxMemoryType; Type++) {
+ for (Index = 0; gMemoryTypeInformation[Index].Type != EfiMaxMemoryType; Index++) {
+ if (Type == (EFI_MEMORY_TYPE)gMemoryTypeInformation[Index].Type) {
+ mMemoryTypeStatistics[Type].InformationIndex = Index;
+ }
+ }
+
+ mMemoryTypeStatistics[Type].CurrentNumberOfPages = 0;
+ if (mMemoryTypeStatistics[Type].MaximumAddress == MAX_ALLOC_ADDRESS) {
+ mMemoryTypeStatistics[Type].MaximumAddress = mDefaultMaximumAddress;
+ }
+ }
+
+ mMemoryTypeInformationInitialized = TRUE;
+}
+
/**
Called to initialize the memory map and add descriptors to
the current descriptor list.
--
2.40.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#114229): https://edk2.groups.io/g/devel/message/114229
Mute This Topic: https://groups.io/mt/103918464/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next reply other threads:[~2024-01-23 20:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-23 20:24 Michael D Kinney [this message]
2024-01-24 14:17 ` [edk2-devel] [Patch v2 1/1] MdeModulePkg/Core/Dxe: Set MemoryTypeInfo bin range from HOB Laszlo Ersek
2024-01-24 17:39 ` Michael D Kinney
2024-01-24 14:20 ` Laszlo Ersek
2024-01-24 17:46 ` Michael D Kinney
2024-01-25 21:34 ` Laszlo Ersek
2024-01-24 14:59 ` [edk2-devel] 回复: " gaoliming via groups.io
2024-01-24 16:16 ` Laszlo Ersek
2024-01-24 17:52 ` Michael D Kinney
2024-01-25 1:18 ` 回复: " gaoliming via groups.io
2024-01-25 1:39 ` Michael D Kinney
2024-01-26 15:50 ` 回复: " gaoliming via groups.io
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240123202424.1960-1-michael.d.kinney@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox