From: "duntan" <dun.tan@intel.com>
To: devel@edk2.groups.io
Cc: Ray Ni <ray.ni@intel.com>, Laszlo Ersek <lersek@redhat.com>,
Rahul Kumar <rahul1.kumar@intel.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Jiaxin Wu <jiaxin.wu@intel.com>
Subject: [edk2-devel] [PATCH 09/18] UefiCpuPkg:Move some code in DxeMpLib to common place
Date: Fri, 10 May 2024 18:08:18 +0800 [thread overview]
Message-ID: <20240510100827.1903-10-dun.tan@intel.com> (raw)
In-Reply-To: <20240510100827.1903-1-dun.tan@intel.com>
Move some code in DxeMpLib.C to common MpLib.c.
The related code is to relocate Ap to new safe buffer
before booting into OS. In next commits, these code
also will be used by PeiMpLib. This commit doesn't
change any code functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 151 +++++--------------------------------------------------------------------------------------------------------------------------------------------------
UefiCpuPkg/Library/MpInitLib/MpLib.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
UefiCpuPkg/Library/MpInitLib/MpLib.h | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 197 insertions(+), 147 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index d13cebbee6..229e38e593 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -20,15 +20,11 @@
#define AP_SAFE_STACK_SIZE 128
-CPU_MP_DATA *mCpuMpData = NULL;
-EFI_EVENT mCheckAllApsEvent = NULL;
-EFI_EVENT mMpInitExitBootServicesEvent = NULL;
-EFI_EVENT mLegacyBootEvent = NULL;
-volatile BOOLEAN mStopCheckAllApsStatus = TRUE;
-RELOCATE_AP_LOOP_ENTRY mReservedApLoop;
-UINTN mReservedTopOfApStack;
-volatile UINT32 mNumberToFinish = 0;
-UINTN mApPageTable;
+CPU_MP_DATA *mCpuMpData = NULL;
+EFI_EVENT mCheckAllApsEvent = NULL;
+EFI_EVENT mMpInitExitBootServicesEvent = NULL;
+EFI_EVENT mLegacyBootEvent = NULL;
+volatile BOOLEAN mStopCheckAllApsStatus = TRUE;
//
// Begin wakeup buffer allocation below 0x88000
@@ -368,60 +364,6 @@ GetProtectedModeCS (
return Index * 8;
}
-/**
- Do sync on APs.
-
- @param[in, out] Buffer Pointer to private data buffer.
-**/
-VOID
-EFIAPI
-RelocateApLoop (
- IN OUT VOID *Buffer
- )
-{
- CPU_MP_DATA *CpuMpData;
- BOOLEAN MwaitSupport;
- UINTN ProcessorNumber;
- UINTN StackStart;
-
- MpInitLibWhoAmI (&ProcessorNumber);
- CpuMpData = GetCpuMpData ();
- MwaitSupport = IsMwaitSupport ();
- if (CpuMpData->UseSevEsAPMethod) {
- //
- // 64-bit AMD processors with SEV-ES
- //
- StackStart = CpuMpData->SevEsAPResetStackStart;
- mReservedApLoop.AmdSevEntry (
- MwaitSupport,
- CpuMpData->ApTargetCState,
- CpuMpData->PmCodeSegment,
- StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
- (UINTN)&mNumberToFinish,
- CpuMpData->Pm16CodeSegment,
- CpuMpData->SevEsAPBuffer,
- CpuMpData->WakeupBuffer
- );
- } else {
- //
- // Intel processors (32-bit or 64-bit), 32-bit AMD processors, or 64-bit AMD processors without SEV-ES
- //
- StackStart = mReservedTopOfApStack;
- mReservedApLoop.GenericEntry (
- MwaitSupport,
- CpuMpData->ApTargetCState,
- StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
- (UINTN)&mNumberToFinish,
- mApPageTable
- );
- }
-
- //
- // It should never reach here
- //
- ASSERT (FALSE);
-}
-
/**
Allocate buffer for ApLoopCode.
@@ -477,89 +419,6 @@ RemoveNxprotection (
}
}
-/**
- Prepare ApLoopCode.
-
- @param[in] CpuMpData Pointer to CpuMpData.
-**/
-VOID
-PrepareApLoopCode (
- IN CPU_MP_DATA *CpuMpData
- )
-{
- EFI_PHYSICAL_ADDRESS Address;
- MP_ASSEMBLY_ADDRESS_MAP *AddressMap;
- UINT8 *ApLoopFunc;
- UINTN ApLoopFuncSize;
- UINTN StackPages;
- UINTN FuncPages;
- IA32_CR0 Cr0;
-
- AddressMap = &CpuMpData->AddressMap;
- if (CpuMpData->UseSevEsAPMethod) {
- //
- // 64-bit AMD processors with SEV-ES
- //
- Address = BASE_4GB - 1;
- ApLoopFunc = AddressMap->RelocateApLoopFuncAddressAmdSev;
- ApLoopFuncSize = AddressMap->RelocateApLoopFuncSizeAmdSev;
- } else {
- //
- // Intel processors (32-bit or 64-bit), 32-bit AMD processors, or 64-bit AMD processors without SEV-ES
- //
- Address = MAX_ADDRESS;
- ApLoopFunc = AddressMap->RelocateApLoopFuncAddressGeneric;
- ApLoopFuncSize = AddressMap->RelocateApLoopFuncSizeGeneric;
- }
-
- //
- // Avoid APs access invalid buffer data which allocated by BootServices,
- // so we will allocate reserved data for AP loop code. We also need to
- // allocate this buffer below 4GB due to APs may be transferred to 32bit
- // protected mode on long mode DXE.
- // Allocating it in advance since memory services are not available in
- // Exit Boot Services callback function.
- //
- // +------------+ (TopOfApStack)
- // | Stack * N |
- // +------------+ (stack base, 4k aligned)
- // | Padding |
- // +------------+
- // | Ap Loop |
- // +------------+ ((low address, 4k-aligned)
- //
-
- StackPages = EFI_SIZE_TO_PAGES (CpuMpData->CpuCount * AP_SAFE_STACK_SIZE);
- FuncPages = EFI_SIZE_TO_PAGES (ApLoopFuncSize);
-
- AllocateApLoopCodeBuffer (StackPages + FuncPages, &Address);
- ASSERT (Address != 0);
-
- Cr0.UintN = AsmReadCr0 ();
- if (Cr0.Bits.PG != 0) {
- //
- // Make sure that the buffer memory is executable if NX protection is enabled
- // for EfiReservedMemoryType.
- //
- RemoveNxprotection (Address, EFI_PAGES_TO_SIZE (FuncPages));
- }
-
- mReservedTopOfApStack = (UINTN)Address + EFI_PAGES_TO_SIZE (StackPages+FuncPages);
- ASSERT ((mReservedTopOfApStack & (UINTN)(CPU_STACK_ALIGNMENT - 1)) == 0);
- mReservedApLoop.Data = (VOID *)(UINTN)Address;
- ASSERT (mReservedApLoop.Data != NULL);
- CopyMem (mReservedApLoop.Data, ApLoopFunc, ApLoopFuncSize);
- if (!CpuMpData->UseSevEsAPMethod) {
- //
- // processors without SEV-ES and paging is enabled
- //
- mApPageTable = CreatePageTable (
- (UINTN)Address,
- EFI_PAGES_TO_SIZE (StackPages+FuncPages)
- );
- }
-}
-
/**
Callback function for ExitBootServices.
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index d724456502..441e8b2b9c 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -17,6 +17,11 @@ EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
EFI_GUID mMpHandOffGuid = MP_HANDOFF_GUID;
EFI_GUID mMpHandOffConfigGuid = MP_HANDOFF_CONFIG_GUID;
+RELOCATE_AP_LOOP_ENTRY mReservedApLoop;
+UINTN mReservedTopOfApStack;
+volatile UINT32 mNumberToFinish = 0;
+UINTN mApPageTable;
+
/**
Save the volatile registers required to be restored following INIT IPI.
@@ -3227,3 +3232,140 @@ ConfidentialComputingGuestHas (
return (CurrentAttr == Attr);
}
+
+/**
+ Do sync on APs.
+
+ @param[in, out] Buffer Pointer to private data buffer.
+**/
+VOID
+EFIAPI
+RelocateApLoop (
+ IN OUT VOID *Buffer
+ )
+{
+ CPU_MP_DATA *CpuMpData;
+ BOOLEAN MwaitSupport;
+ UINTN ProcessorNumber;
+ UINTN StackStart;
+
+ MpInitLibWhoAmI (&ProcessorNumber);
+ CpuMpData = GetCpuMpData ();
+ MwaitSupport = IsMwaitSupport ();
+ if (CpuMpData->UseSevEsAPMethod) {
+ //
+ // 64-bit AMD processors with SEV-ES
+ //
+ StackStart = CpuMpData->SevEsAPResetStackStart;
+ mReservedApLoop.AmdSevEntry (
+ MwaitSupport,
+ CpuMpData->ApTargetCState,
+ CpuMpData->PmCodeSegment,
+ StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
+ (UINTN)&mNumberToFinish,
+ CpuMpData->Pm16CodeSegment,
+ CpuMpData->SevEsAPBuffer,
+ CpuMpData->WakeupBuffer
+ );
+ } else {
+ //
+ // Intel processors (32-bit or 64-bit), 32-bit AMD processors, or 64-bit AMD processors without SEV-ES
+ //
+ StackStart = mReservedTopOfApStack;
+ mReservedApLoop.GenericEntry (
+ MwaitSupport,
+ CpuMpData->ApTargetCState,
+ StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
+ (UINTN)&mNumberToFinish,
+ mApPageTable
+ );
+ }
+
+ //
+ // It should never reach here
+ //
+ ASSERT (FALSE);
+}
+
+/**
+ Prepare ApLoopCode.
+
+ @param[in] CpuMpData Pointer to CpuMpData.
+**/
+VOID
+PrepareApLoopCode (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ EFI_PHYSICAL_ADDRESS Address;
+ MP_ASSEMBLY_ADDRESS_MAP *AddressMap;
+ UINT8 *ApLoopFunc;
+ UINTN ApLoopFuncSize;
+ UINTN StackPages;
+ UINTN FuncPages;
+ IA32_CR0 Cr0;
+
+ AddressMap = &CpuMpData->AddressMap;
+ if (CpuMpData->UseSevEsAPMethod) {
+ //
+ // 64-bit AMD processors with SEV-ES
+ //
+ Address = BASE_4GB - 1;
+ ApLoopFunc = AddressMap->RelocateApLoopFuncAddressAmdSev;
+ ApLoopFuncSize = AddressMap->RelocateApLoopFuncSizeAmdSev;
+ } else {
+ //
+ // Intel processors (32-bit or 64-bit), 32-bit AMD processors, or 64-bit AMD processors without SEV-ES
+ //
+ Address = MAX_ADDRESS;
+ ApLoopFunc = AddressMap->RelocateApLoopFuncAddressGeneric;
+ ApLoopFuncSize = AddressMap->RelocateApLoopFuncSizeGeneric;
+ }
+
+ //
+ // Avoid APs access invalid buffer data which allocated by BootServices,
+ // so we will allocate reserved data for AP loop code. We also need to
+ // allocate this buffer below 4GB due to APs may be transferred to 32bit
+ // protected mode on long mode DXE.
+ // Allocating it in advance since memory services are not available in
+ // Exit Boot Services callback function.
+ //
+ // +------------+ (TopOfApStack)
+ // | Stack * N |
+ // +------------+ (stack base, 4k aligned)
+ // | Padding |
+ // +------------+
+ // | Ap Loop |
+ // +------------+ ((low address, 4k-aligned)
+ //
+
+ StackPages = EFI_SIZE_TO_PAGES (CpuMpData->CpuCount * AP_SAFE_STACK_SIZE);
+ FuncPages = EFI_SIZE_TO_PAGES (ApLoopFuncSize);
+
+ AllocateApLoopCodeBuffer (StackPages + FuncPages, &Address);
+ ASSERT (Address != 0);
+
+ Cr0.UintN = AsmReadCr0 ();
+ if (Cr0.Bits.PG != 0) {
+ //
+ // Make sure that the buffer memory is executable if NX protection is enabled
+ // for EfiReservedMemoryType.
+ //
+ RemoveNxprotection (Address, EFI_PAGES_TO_SIZE (FuncPages));
+ }
+
+ mReservedTopOfApStack = (UINTN)Address + EFI_PAGES_TO_SIZE (StackPages+FuncPages);
+ ASSERT ((mReservedTopOfApStack & (UINTN)(CPU_STACK_ALIGNMENT - 1)) == 0);
+ mReservedApLoop.Data = (VOID *)(UINTN)Address;
+ ASSERT (mReservedApLoop.Data != NULL);
+ CopyMem (mReservedApLoop.Data, ApLoopFunc, ApLoopFuncSize);
+ if (!CpuMpData->UseSevEsAPMethod) {
+ //
+ // processors without SEV-ES and paging is enabled
+ //
+ mApPageTable = CreatePageTable (
+ (UINTN)Address,
+ EFI_PAGES_TO_SIZE (StackPages+FuncPages)
+ );
+ }
+}
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 179f8e585b..11e0d2661f 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -357,7 +357,8 @@ typedef
IN UINTN StackStart
);
-extern EFI_GUID mCpuInitMpLibHobGuid;
+extern EFI_GUID mCpuInitMpLibHobGuid;
+extern volatile UINT32 mNumberToFinish;
/**
Assembly code to place AP into safe loop mode.
@@ -933,4 +934,52 @@ AmdSevUpdateCpuMpData (
IN CPU_MP_DATA *CpuMpData
);
+/**
+ Prepare ApLoopCode.
+
+ @param[in] CpuMpData Pointer to CpuMpData.
+**/
+VOID
+PrepareApLoopCode (
+ IN CPU_MP_DATA *CpuMpData
+ );
+
+/**
+ Do sync on APs.
+
+ @param[in, out] Buffer Pointer to private data buffer.
+**/
+VOID
+EFIAPI
+RelocateApLoop (
+ IN OUT VOID *Buffer
+ );
+
+/**
+ Allocate buffer for ApLoopCode.
+
+ @param[in] Pages Number of pages to allocate.
+ @param[in, out] Address Pointer to the allocated buffer.
+**/
+VOID
+AllocateApLoopCodeBuffer (
+ IN UINTN Pages,
+ IN OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+/**
+ Remove Nx protection for the range specific by BaseAddress and Length.
+
+ The PEI implementation uses CpuPageTableLib to change the attribute.
+ The DXE implementation uses gDS to change the attribute.
+
+ @param[in] BaseAddress BaseAddress of the range.
+ @param[in] Length Length of the range.
+**/
+VOID
+RemoveNxprotection (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINTN Length
+ );
+
#endif
--
2.31.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118801): https://edk2.groups.io/g/devel/message/118801
Mute This Topic: https://groups.io/mt/106018133/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2024-05-10 10:09 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 10:08 [edk2-devel] [PATCH 00/19] Remove some S3 related code in CpuS3.c of smm cpu driver duntan
2024-05-10 10:08 ` [edk2-devel] [PATCH 01/18] MdeModulePkg: Add gEdkiiS3MtrrSettingGuid duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 02/18] OvmfPkg: Save MTRR by lockbox in CpuS3DataDxe duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-20 7:43 ` Ard Biesheuvel
2024-05-10 10:08 ` [edk2-devel] [PATCH 03/18] UefiCpuPkg: Add locbox lib instance in DSC duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 04/18] UefiCpuPkg: Save MTRR by lockbox in CpuS3DataDxe duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-13 3:04 ` Wu, Jiaxin
2024-05-13 3:37 ` duntan
2024-05-10 10:08 ` [edk2-devel] [PATCH 05/18] UefiCpuPkg: LoadMtrrData for all cpu in S3Resume duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 06/18] UefiCpuPkg: Remove the duplicated mpservice locate duntan
2024-05-13 2:07 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 07/18] UefiCpuPkg: Install gEdkiiEndOfS3ResumeGuid in S3Resume duntan
2024-05-10 10:08 ` [edk2-devel] [PATCH 08/18] UefiCpuPkg:Abstract some DxeMpLib code to function duntan
2024-05-13 2:13 ` Ni, Ray
2024-05-10 10:08 ` duntan [this message]
2024-05-13 2:16 ` [edk2-devel] [PATCH 09/18] UefiCpuPkg:Move some code in DxeMpLib to common place Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 10/18] UefiCpuPkg:Relocate AP to new safe buffer in PeiMpLib duntan
2024-05-13 2:23 ` Ni, Ray
2024-05-13 11:07 ` Gerd Hoffmann
2024-05-14 5:17 ` Ni, Ray
2024-05-14 6:51 ` Gerd Hoffmann
2024-05-10 10:08 ` [edk2-devel] [PATCH 11/18] UefiCpuPkg: Disable PG in IA32 ApLoopCode duntan
2024-05-13 2:25 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 12/18] UefiCpuPkg: Remove code to load mtrr setting duntan
2024-05-13 2:25 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 13/18] UefiCpuPkg:Set PcdCpuFeaturesInitOnS3Resume to TRUE duntan
2024-05-13 2:26 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 14/18] UefiCpuPkg: Remove code to set register table duntan
2024-05-13 2:26 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 15/18] UefiCpuPkg:Remove code to handle APIC setting and Interrupt duntan
2024-05-13 2:27 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 16/18] UefiCpuPkg:Remove code to wakeup AP and relocate ap duntan
2024-05-13 2:32 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 17/18] UefiCpuPkg: Remove GetAcpiCpuData() in CpuS3.c duntan
2024-05-13 2:33 ` Ni, Ray
2024-05-10 10:08 ` [edk2-devel] [PATCH 18/18] MdeModulePkg:Remove MpService2Ppi field in SMM_S3_RESUME_STATE duntan
2024-05-13 2:35 ` Ni, Ray
2024-05-13 3:38 ` duntan
2024-05-13 2:48 ` [edk2-devel] [PATCH 00/19] Remove some S3 related code in CpuS3.c of smm cpu driver Wu, Jiaxin
2024-05-13 3:37 ` duntan
2024-05-13 6:00 ` Ni, Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510100827.1903-10-dun.tan@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox