From: "Ning Feng" <ning.feng@intel.com>
To: devel@edk2.groups.io
Cc: Ning Feng <ning.feng@intel.com>, Ray Ni <ray.ni@intel.com>
Subject: [edk2-devel] [PATCH] Pkg-Module:UefiCpuPkg/MpLib
Date: Thu, 23 May 2024 14:02:35 -0400 [thread overview]
Message-ID: <20240523180235.3841139-1-ning.feng@intel.com> (raw)
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4778
MPInitlib have wrong expectation that BSP index should always be 0 in
MpInitLibInitialize(), SwitchBsp(),ApWakeupFunction().
That will cause the data mismatch, if the initial BSP is not 0.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ning Feng <ning.feng@intel.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.c | 34 ++++++++++++++++++++--------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index d724456502..ae279c6ceb 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -114,6 +114,10 @@ FutureBSPProc (
SaveVolatileRegisters (&DataInHob->APInfo.VolatileRegisters);
AsmExchangeRole (&DataInHob->APInfo, &DataInHob->BSPInfo);
RestoreVolatileRegisters (&DataInHob->APInfo.VolatileRegisters, FALSE);
+ //
+ // Restore VolatileReg saved in CpuMpData->CpuData
+ //
+ CopyMem (&DataInHob->CpuData[DataInHob->BspNumber].VolatileRegisters, &DataInHob->APInfo.VolatileRegisters, sizeof (CPU_VOLATILE_REGISTERS));
}
/**
@@ -761,11 +765,11 @@ ApWakeupFunction (
BistData = (UINT32)ApStackData->Bist;
//
- // CpuMpData->CpuData[0].VolatileRegisters is initialized based on BSP environment,
+ // CpuMpData->CpuData[BspNumber].VolatileRegisters is initialized based on BSP environment,
// to initialize AP in InitConfig path.
- // NOTE: IDTR.BASE stored in CpuMpData->CpuData[0].VolatileRegisters points to a different IDT shared by all APs.
+ // NOTE: IDTR.BASE stored in CpuMpData->CpuData[BspNumber].VolatileRegisters points to a different IDT shared by all APs.
//
- RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
+ RestoreVolatileRegisters (&CpuMpData->CpuData[CpuMpData->BspNumber].VolatileRegisters, FALSE);
InitializeApData (CpuMpData, ProcessorNumber, BistData, ApTopOfStack);
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
} else {
@@ -798,10 +802,10 @@ ApWakeupFunction (
// 1. AP is re-enabled after it's disabled, in either PEI or DXE phase.
// 2. AP is initialized in DXE phase.
// In either case, use the volatile registers value derived from BSP.
- // NOTE: IDTR.BASE stored in CpuMpData->CpuData[0].VolatileRegisters points to a
+ // NOTE: IDTR.BASE stored in CpuMpData->CpuData[BspNumber].VolatileRegisters points to a
// different IDT shared by all APs.
//
- RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
+ RestoreVolatileRegisters (&CpuMpData->CpuData[CpuMpData->BspNumber].VolatileRegisters, FALSE);
} else {
if (CpuMpData->ApLoopMode == ApInHltLoop) {
//
@@ -927,7 +931,7 @@ DxeApEntryPoint (
AsmWriteMsr64 (MSR_IA32_EFER, EferMsr.Uint64);
}
- RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
+ RestoreVolatileRegisters (&CpuMpData->CpuData[CpuMpData->BspNumber].VolatileRegisters, FALSE);
InterlockedIncrement ((UINT32 *)&CpuMpData->FinishedCount);
PlaceAPInMwaitLoopOrRunLoop (
CpuMpData->ApLoopMode,
@@ -2151,7 +2155,12 @@ MpInitLibInitialize (
CpuMpData->BackupBufferSize = ApResetVectorSizeBelow1Mb;
CpuMpData->WakeupBuffer = (UINTN)-1;
CpuMpData->CpuCount = 1;
- CpuMpData->BspNumber = 0;
+ if (MpHandOff == NULL) {
+ CpuMpData->BspNumber = 0;
+ } else {
+ CpuMpData->BspNumber = GetBspNumber (MpHandOff);
+ }
+
CpuMpData->WaitEvent = NULL;
CpuMpData->SwitchBspFlag = FALSE;
CpuMpData->CpuData = (CPU_AP_DATA *)(CpuMpData + 1);
@@ -2186,11 +2195,11 @@ MpInitLibInitialize (
// Don't pass BSP's TR to APs to avoid AP init failure.
//
VolatileRegisters.Tr = 0;
- CopyMem (&CpuMpData->CpuData[0].VolatileRegisters, &VolatileRegisters, sizeof (VolatileRegisters));
+ CopyMem (&CpuMpData->CpuData[CpuMpData->BspNumber].VolatileRegisters, &VolatileRegisters, sizeof (VolatileRegisters));
//
// Set BSP basic information
//
- InitializeApData (CpuMpData, 0, 0, CpuMpData->Buffer + ApStackSize);
+ InitializeApData (CpuMpData, CpuMpData->BspNumber, 0, CpuMpData->Buffer + ApStackSize * (CpuMpData->BspNumber + 1));
//
// Save assembly code information
//
@@ -2615,7 +2624,12 @@ SwitchBSPWorker (
SaveVolatileRegisters (&CpuMpData->BSPInfo.VolatileRegisters);
AsmExchangeRole (&CpuMpData->BSPInfo, &CpuMpData->APInfo);
RestoreVolatileRegisters (&CpuMpData->BSPInfo.VolatileRegisters, FALSE);
-
+ //
+ // Restore VolatileRegs saved in CpuMpData->CpuData
+ // Don't pass BSP's TR to APs to avoid AP init failure.
+ //
+ CopyMem (&CpuMpData->CpuData[CpuMpData->NewBspNumber].VolatileRegisters, &CpuMpData->BSPInfo.VolatileRegisters, sizeof (CPU_VOLATILE_REGISTERS));
+ CpuMpData->CpuData[CpuMpData->NewBspNumber].VolatileRegisters.Tr = 0;
//
// Set the BSP bit of MSR_IA32_APIC_BASE on new BSP
//
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#119140): https://edk2.groups.io/g/devel/message/119140
Mute This Topic: https://groups.io/mt/106256300/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next reply other threads:[~2024-05-23 9:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-23 18:02 Ning Feng [this message]
2024-05-23 9:55 ` [edk2-devel] [PATCH] Pkg-Module:UefiCpuPkg/MpLib Ning Feng
2024-05-23 14:39 ` Ni, Ray
2024-05-24 1:26 ` Ning Feng
-- strict thread matches above, loose matches on Subject: below --
2024-05-23 17:51 Ning Feng
2024-05-23 17:44 Ning Feng
2024-05-23 11:13 Ning Feng
2024-05-23 7:31 ` Ni, Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523180235.3841139-1-ning.feng@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox