[edk2-devel] [PATCH v3 18/20] ArmVirtPkg: Use dynamic PCD to set the SMCCC conduit

["Doug Flick via groups.io" <dougflick=microsoft.com@groups.io>]

From: Ard Biesheuvel <ardb@kernel.org>

On ARM systems, whether SMC or HVC instructions need to be used to issue
monitor calls is typically dependent on the exception level, but there
are also cases where EL1 might use SMC instructions, so there is no hard
and fast rule.

For ArmVirtQemu, this does depend strictly on the exception level, so
set the default to HVC (for EL1 execution) and override it to SMC when
booted at EL2.

Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>

Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
---
 ArmVirtPkg/ArmVirtCloudHv.dsc                        |  3 +++
 ArmVirtPkg/ArmVirtQemu.dsc                           |  4 ++++
 ArmVirtPkg/ArmVirtQemuKernel.dsc                     |  2 ++
 ArmVirtPkg/ArmVirtXen.dsc                            |  2 ++
 ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf |  1 +
 ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c   | 14 ++++++++++++++
 6 files changed, 26 insertions(+)

diff --git a/ArmVirtPkg/ArmVirtCloudHv.dsc b/ArmVirtPkg/ArmVirtCloudHv.dsc
index 5cb2a609b1..d5055a0341 100644
--- a/ArmVirtPkg/ArmVirtCloudHv.dsc
+++ b/ArmVirtPkg/ArmVirtCloudHv.dsc
@@ -201,6 +201,9 @@
 [PcdsDynamicHii]
   gUefiOvmfPkgTokenSpaceGuid.PcdForceNoAcpi|L"ForceNoAcpi"|gOvmfVariableGuid|0x0|FALSE|NV,BS
 
+[PcdsPatchableInModule.common]
+  gArmTokenSpaceGuid.PcdMonitorConduitHvc|TRUE
+
 ################################################################################
 #
 # Components Section - list of all EDK II Modules needed by this Platform
diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
index 4498ca58a8..80dd4fbb14 100644
--- a/ArmVirtPkg/ArmVirtQemu.dsc
+++ b/ArmVirtPkg/ArmVirtQemu.dsc
@@ -293,6 +293,10 @@
   gEfiNetworkPkgTokenSpaceGuid.PcdIPv4PXESupport|0x01
   gEfiNetworkPkgTokenSpaceGuid.PcdIPv6PXESupport|0x01
 
+  # whether to use HVC or SMC to issue monitor calls - this typically depends
+  # on the exception level at which the UEFI system firmware executes
+  gArmTokenSpaceGuid.PcdMonitorConduitHvc|TRUE
+
   #
   # TPM2 support
   #
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
index 94f48593c2..2700b97d09 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
+++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
@@ -203,6 +203,8 @@
   gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
   gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
 
+  gArmTokenSpaceGuid.PcdMonitorConduitHvc|TRUE
+
 [PcdsDynamicDefault.common]
   gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
 
diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
index 5809832e66..ceb37f8a2d 100644
--- a/ArmVirtPkg/ArmVirtXen.dsc
+++ b/ArmVirtPkg/ArmVirtXen.dsc
@@ -120,6 +120,8 @@
   gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
   gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
 
+  gArmTokenSpaceGuid.PcdMonitorConduitHvc|TRUE
+
 [PcdsDynamicDefault.common]
 
   gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
index e9a34b6e2e..a38b89c103 100644
--- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
+++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
@@ -45,6 +45,7 @@
 
 [Pcd]
   gArmTokenSpaceGuid.PcdFvBaseAddress
+  gArmTokenSpaceGuid.PcdMonitorConduitHvc
   gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress             ## SOMETIMES_PRODUCES
   gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
 
diff --git a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c
index 7ab4aa2d6b..b8e9208301 100644
--- a/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c
+++ b/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c
@@ -18,6 +18,8 @@
 #include <Library/FdtSerialPortAddressLib.h>
 #include <libfdt.h>
 
+#include <Chipset/AArch64.h>
+
 #include <Guid/EarlyPL011BaseAddress.h>
 #include <Guid/FdtHob.h>
 
@@ -224,5 +226,17 @@ PlatformPeim (
 
   BuildFvHob (PcdGet64 (PcdFvBaseAddress), PcdGet32 (PcdFvSize));
 
+ #ifdef MDE_CPU_AARCH64
+  //
+  // Set the SMCCC conduit to SMC if executing at EL2, which is typically the
+  // exception level that services HVCs rather than the one that invokes them.
+  //
+  if (ArmReadCurrentEL () == AARCH64_EL2) {
+    Status = PcdSetBoolS (PcdMonitorConduitHvc, FALSE);
+    ASSERT_EFI_ERROR (Status);
+  }
+
+ #endif
+
   return EFI_SUCCESS;
 }
-- 
2.34.1