[edk2-devel] [staging/dynamictables-reorg PATCH 14/15] DynamicTablesPkg: FdtHwInfoParserLib: Move IRQ map to arch folder

["PierreGondois" <pierre.gondois@arm.com>]

The interrupts-extended property in DT is arch specific.
Move the current implementation and the way to decode the property
to the Arm folder to prepare for other architecture support.

Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
---
 .../FdtHwInfoParserLib/Arm/ArmFdtUtility.c    | 85 +++++++++++++++++++
 .../FdtHwInfoParserLib/FdtHwInfoParserLib.inf |  1 +
 .../Library/FdtHwInfoParserLib/FdtUtility.c   | 71 ----------------
 3 files changed, 86 insertions(+), 71 deletions(-)
 create mode 100644 DynamicTablesPkg/Library/FdtHwInfoParserLib/Arm/ArmFdtUtility.c

diff --git a/DynamicTablesPkg/Library/FdtHwInfoParserLib/Arm/ArmFdtUtility.c b/DynamicTablesPkg/Library/FdtHwInfoParserLib/Arm/ArmFdtUtility.c
new file mode 100644
index 000000000000..21b1306e577d
--- /dev/null
+++ b/DynamicTablesPkg/Library/FdtHwInfoParserLib/Arm/ArmFdtUtility.c
@@ -0,0 +1,85 @@
+/** @file
+  Flattened device tree utility.
+
+  Copyright (c) 2021, ARM Limited. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+  @par Reference(s):
+  - Device tree Specification - Release v0.3
+  - linux/Documentation/devicetree/bindings/interrupt-controller/arm%2Cgic.yaml
+  - linux//Documentation/devicetree/bindings/interrupt-controller/arm%2Cgic.yaml
+**/
+
+#include <FdtHwInfoParserInclude.h>
+#include "FdtUtility.h"
+
+/** Get the interrupt Id of an interrupt described in a fdt.
+
+  Data must describe a GIC interrupt. A GIC interrupt is on at least
+  3 UINT32 cells.
+  This function DOES NOT SUPPORT extended SPI range and extended PPI range.
+
+  @param [in]  Data   Pointer to the first cell of an "interrupts" property.
+
+  @retval  The interrupt id.
+**/
+UINT32
+EFIAPI
+FdtGetInterruptId (
+  UINT32 CONST  *Data
+  )
+{
+  UINT32  IrqType;
+  UINT32  IrqId;
+
+  ASSERT (Data != NULL);
+
+  IrqType = fdt32_to_cpu (Data[IRQ_TYPE_OFFSET]);
+  IrqId   = fdt32_to_cpu (Data[IRQ_NUMBER_OFFSET]);
+
+  switch (IrqType) {
+    case DT_SPI_IRQ:
+      IrqId += SPI_OFFSET;
+      break;
+
+    case DT_PPI_IRQ:
+      IrqId += PPI_OFFSET;
+      break;
+
+    default:
+      ASSERT (0);
+      IrqId = 0;
+  }
+
+  return IrqId;
+}
+
+/** Get the ACPI interrupt flags of an interrupt described in a fdt.
+
+  Data must describe a GIC interrupt. A GIC interrupt is on at least
+  3 UINT32 cells.
+
+  PPI interrupt cpu mask on bits [15:8] are ignored.
+
+  @param [in]  Data   Pointer to the first cell of an "interrupts" property.
+
+  @retval  The interrupt flags (for ACPI).
+**/
+UINT32
+EFIAPI
+FdtGetInterruptFlags (
+  UINT32 CONST  *Data
+  )
+{
+  UINT32  IrqFlags;
+  UINT32  AcpiIrqFlags;
+
+  ASSERT (Data != NULL);
+
+  IrqFlags = fdt32_to_cpu (Data[IRQ_FLAGS_OFFSET]);
+
+  AcpiIrqFlags  = DT_IRQ_IS_EDGE_TRIGGERED (IrqFlags) ? BIT0 : 0;
+  AcpiIrqFlags |= DT_IRQ_IS_ACTIVE_LOW (IrqFlags) ? BIT1 : 0;
+
+  return AcpiIrqFlags;
+}
diff --git a/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf b/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf
index d3010af527c1..8e1ea100bd34 100644
--- a/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf
+++ b/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf
@@ -28,6 +28,7 @@ [Sources]
   Serial/SerialPortParser.h
 
 [Sources.ARM, Sources.AARCH64]
+  Arm/ArmFdtUtility.c
   Arm/ArmFdtHwInfoParser.c
   Arm/BootArch/ArmBootArchParser.c
   Arm/BootArch/ArmBootArchParser.h
diff --git a/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtUtility.c b/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtUtility.c
index 5314cf3808c2..bab228575938 100644
--- a/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtUtility.c
+++ b/DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtUtility.c
@@ -13,77 +13,6 @@
 #include <FdtHwInfoParserInclude.h>
 #include "FdtUtility.h"
 
-/** Get the interrupt Id of an interrupt described in a fdt.
-
-  Data must describe a GIC interrupt. A GIC interrupt is on at least
-  3 UINT32 cells.
-  This function DOES NOT SUPPORT extended SPI range and extended PPI range.
-
-  @param [in]  Data   Pointer to the first cell of an "interrupts" property.
-
-  @retval  The interrupt id.
-**/
-UINT32
-EFIAPI
-FdtGetInterruptId (
-  UINT32 CONST  *Data
-  )
-{
-  UINT32  IrqType;
-  UINT32  IrqId;
-
-  ASSERT (Data != NULL);
-
-  IrqType = fdt32_to_cpu (Data[IRQ_TYPE_OFFSET]);
-  IrqId   = fdt32_to_cpu (Data[IRQ_NUMBER_OFFSET]);
-
-  switch (IrqType) {
-    case DT_SPI_IRQ:
-      IrqId += SPI_OFFSET;
-      break;
-
-    case DT_PPI_IRQ:
-      IrqId += PPI_OFFSET;
-      break;
-
-    default:
-      ASSERT (0);
-      IrqId = 0;
-  }
-
-  return IrqId;
-}
-
-/** Get the ACPI interrupt flags of an interrupt described in a fdt.
-
-  Data must describe a GIC interrupt. A GIC interrupt is on at least
-  3 UINT32 cells.
-
-  PPI interrupt cpu mask on bits [15:8] are ignored.
-
-  @param [in]  Data   Pointer to the first cell of an "interrupts" property.
-
-  @retval  The interrupt flags (for ACPI).
-**/
-UINT32
-EFIAPI
-FdtGetInterruptFlags (
-  UINT32 CONST  *Data
-  )
-{
-  UINT32  IrqFlags;
-  UINT32  AcpiIrqFlags;
-
-  ASSERT (Data != NULL);
-
-  IrqFlags = fdt32_to_cpu (Data[IRQ_FLAGS_OFFSET]);
-
-  AcpiIrqFlags  = DT_IRQ_IS_EDGE_TRIGGERED (IrqFlags) ? BIT0 : 0;
-  AcpiIrqFlags |= DT_IRQ_IS_ACTIVE_LOW (IrqFlags) ? BIT1 : 0;
-
-  return AcpiIrqFlags;
-}
-
 /** Check whether a node has the input name.
 
   @param [in]  Fdt          Pointer to a Flattened Device Tree.
-- 
2.25.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#119646): https://edk2.groups.io/g/devel/message/119646
Mute This Topic: https://groups.io/mt/106770184/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-