From: "Pete Batard" <pete@akeo.ie>
To: Sunny Wang <Sunny.Wang@arm.com>, devel@edk2.groups.io
Cc: "Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@arm.com>,
"Sami Mujawar" <sami.mujawar@arm.com>,
"Jeremy Linton" <jeremy.linton@arm.com>,
"Ard Biesheuvel" <ardb+tianocore@kernel.org>,
"Mario Bălănică" <mariobalanica02@gmail.com>
Subject: Re: [PATCH v4 2/3] Silicon/Broadcom/Bcm283x: Clean up GpioPinSet function
Date: Sat, 12 Jun 2021 14:40:04 +0100 [thread overview]
Message-ID: <226ac355-8e9b-6287-456c-b36c9fdc030d@akeo.ie> (raw)
In-Reply-To: <20210607075339.342-3-Sunny.Wang@arm.com>
On 2021.06.07 08:53, Sunny Wang wrote:
> Make the changes below for making it clearer.
> - Rename GpioPinSet() to GpioPinConfigure()
> - Rename parameter Val to Config and change its type to BOOLEAN
>
> Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
> Cc: Sami Mujawar <sami.mujawar@arm.com>
> Cc: Jeremy Linton <jeremy.linton@arm.com>
> Cc: Pete Batard <pete@akeo.ie>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Mario Bălănică <mariobalanica02@gmail.com>
> Signed-off-by: Sunny Wang <sunny.wang@arm.com>
> ---
> Silicon/Broadcom/Bcm283x/Include/Library/GpioLib.h | 10 +++++++---
> Silicon/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c | 9 +++++----
> 2 files changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/Silicon/Broadcom/Bcm283x/Include/Library/GpioLib.h b/Silicon/Broadcom/Bcm283x/Include/Library/GpioLib.h
> index 75c2c8be51..1f7d2204e0 100644
> --- a/Silicon/Broadcom/Bcm283x/Include/Library/GpioLib.h
> +++ b/Silicon/Broadcom/Bcm283x/Include/Library/GpioLib.h
> @@ -3,6 +3,7 @@
> * GPIO manipulation.
> *
> * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) 2021, ARM Limited. All rights reserved.
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -13,6 +14,9 @@
>
> #include <IndustryStandard/Bcm2836Gpio.h>
>
> +#define CLEAR_GPIO 0
> +#define SET_GPIO 1
> +
> VOID
> GpioPinFuncSet (
> IN UINTN Pin,
> @@ -25,9 +29,9 @@ GpioPinFuncGet (
> );
>
> VOID
> -GpioPinSet (
> - IN UINTN Pin,
> - IN UINTN Val
> +GpioPinConfigure (
> + IN UINTN Pin,
> + IN BOOLEAN Config
> );
>
> UINTN
> diff --git a/Silicon/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c b/Silicon/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
> index a4b4af59eb..eaf53e5369 100644
> --- a/Silicon/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
> +++ b/Silicon/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
> @@ -4,6 +4,7 @@
> *
> * Copyright (c) 2020, Pete Batard <pete@akeo.ie>
> * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) 2021, ARM Limited. All rights reserved.
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -85,9 +86,9 @@ GpioPinFuncGet (
> }
>
> VOID
> -GpioPinSet (
> - IN UINTN Pin,
> - IN UINTN Val
> +GpioPinConfigure (
> + IN UINTN Pin,
> + IN BOOLEAN Config
> )
> {
> EFI_PHYSICAL_ADDRESS Reg;
> @@ -102,7 +103,7 @@ GpioPinSet (
> //
> // Different base addresses are used for clear and set
> //
> - Reg = (Val == 0) ? GPIO_GPCLR0 : GPIO_GPSET0;
> + Reg = (Config == CLEAR_GPIO) ? GPIO_GPCLR0 : GPIO_GPSET0;
> Reg += RegIndex * sizeof (UINT32);
> MmioWrite32 (Reg, 1 << SelIndex);
> }
>
Reviewed-by: Pete Batard <pete@akeo.ie>
next prev parent reply other threads:[~2021-06-12 13:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 7:53 [PATCH v4 0/3] Dynamically build UARTs info in ACPI Sunny Wang
2021-06-07 7:53 ` [PATCH v4 1/3] Platform/RaspberryPi: " Sunny Wang
2021-06-12 13:39 ` Pete Batard
2021-06-12 20:08 ` Ard Biesheuvel
2021-06-07 7:53 ` [PATCH v4 2/3] Silicon/Broadcom/Bcm283x: Clean up GpioPinSet function Sunny Wang
2021-06-12 13:40 ` Pete Batard [this message]
2021-06-07 7:53 ` [PATCH v4 3/3] Platform/RaspberryPi: Enable Bluetooth and UART in Windows OS Sunny Wang
2021-06-07 15:04 ` Mario Bălănică
2021-06-12 13:40 ` Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=226ac355-8e9b-6287-456c-b36c9fdc030d@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox