* [PATCH 1/2] BraswellPlatformPkg: Use FSP binary from GitHub
@ 2016-08-18 3:12 Guo, Mang
0 siblings, 0 replies; only message in thread
From: Guo, Mang @ 2016-08-18 3:12 UTC (permalink / raw)
To: edk2-devel@lists.01.org; +Cc: Wei, David
Use FSP binary from GitHub: https://github.com/IntelFsp/FSP/tree/Braswell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
---
BraswellPlatformPkg/PlatformFvBinPkg.fdf | 2 +-
BraswellPlatformPkg/PlatformPkg.fdf | 2 +-
ChvFspBinPkg/Include/FspUpdVpd.h | 1008 +++++++++++++++---------------
ReadMe.MD | 24 +-
4 files changed, 524 insertions(+), 512 deletions(-)
diff --git a/BraswellPlatformPkg/PlatformFvBinPkg.fdf b/BraswellPlatformPkg/PlatformFvBinPkg.fdf
index 5f33697..1f241d5 100644
--- a/BraswellPlatformPkg/PlatformFvBinPkg.fdf
+++ b/BraswellPlatformPkg/PlatformFvBinPkg.fdf
@@ -200,7 +200,7 @@ FV = FVSHELL
#
$(FLASH_REGION_FSP_OFFSET) | $(FLASH_REGION_FSP_SIZE)
gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase | gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize
-FILE = ChvFspBinPkg/FspBinary/BswFsp$(TARGET).fd
+FILE = ChvFspBinPkg/FspBinary/BswFsp.fd
#
# VBT FV for FSP
diff --git a/BraswellPlatformPkg/PlatformPkg.fdf b/BraswellPlatformPkg/PlatformPkg.fdf
index 6c40448..b2dff47 100644
--- a/BraswellPlatformPkg/PlatformPkg.fdf
+++ b/BraswellPlatformPkg/PlatformPkg.fdf
@@ -200,7 +200,7 @@ FV = FVSHELL
#
$(FLASH_REGION_FSP_OFFSET) | $(FLASH_REGION_FSP_SIZE)
gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase | gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize
-FILE = ChvFspBinPkg/FspBinary/BswFsp$(TARGET).fd
+FILE = ChvFspBinPkg/FspBinary/BswFsp.fd
#
# VBT FV for FSP
diff --git a/ChvFspBinPkg/Include/FspUpdVpd.h b/ChvFspBinPkg/Include/FspUpdVpd.h
index 0fd57de..1786fe1 100644
--- a/ChvFspBinPkg/Include/FspUpdVpd.h
+++ b/ChvFspBinPkg/Include/FspUpdVpd.h
@@ -1,498 +1,510 @@
-/** @file
- This file is automatically generated. Please do NOT modify !!!
-
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __FSPUPDVPD_H__
-#define __FSPUPDVPD_H__
-
-#pragma pack(1)
-
-
-#define MAX_CHANNELS_NUM 2
-#define MAX_DIMMS_NUM 2
-
-typedef struct {
- UINT32 VendorDeviceId;
- UINT16 SubSystemId;
- UINT8 RevisionId; /// 0xFF applies to all steppings
- UINT8 FrontPanelSupport;
- UINT16 NumberOfRearJacks;
- UINT16 NumberOfFrontJacks;
-} BL_PCH_AZALIA_VERB_TABLE_HEADER;
-
-typedef struct {
- BL_PCH_AZALIA_VERB_TABLE_HEADER VerbTableHeader;
- UINT32 *VerbTableData;
-} BL_PCH_AZALIA_VERB_TABLE;
-
-typedef struct {
- UINT8 Pme : 1; /// 0: Disable; 1: Enable
- UINT8 DS : 1; /// 0: Docking is not supported; 1:Docking is supported
- UINT8 DA : 1; /// 0: Docking is not attached; 1:Docking is attached
- UINT8 HdmiCodec : 1; /// 0: Disable; 1: Enable
- UINT8 AzaliaVCi : 1; /// 0: Disable; 1: Enable
- UINT8 Rsvdbits : 3;
- UINT8 AzaliaVerbTableNum; /// Number of verb tables provided by platform
- BL_PCH_AZALIA_VERB_TABLE *AzaliaVerbTable; /// Pointer to the actual verb table(s)
- UINT16 ResetWaitTimer; /// The delay timer after Azalia reset, the value is number of microseconds
-} BL_PCH_AZALIA_CONFIG;
-
-typedef struct {
- UINT32 Confg;
- UINT32 ConfgChanges;
- UINT32 Misc;
- UINT32 MmioAddr;
- CHAR16 *Name;
-} BL_GPIO_FAMILY_INIT;
-
-typedef struct {
- UINT32 Confg0;
- UINT32 Confg0Changes;
- UINT32 Confg1;
- UINT32 Confg1Changes;
- UINT32 Community;
- UINT32 MmioAddr;
- CHAR16 *Name;
- UINT32 Misc;
-} BL_GPIO_PAD_INIT;
-
-typedef struct {
- UINT8 DimmId;
- UINT32 SizeInMb;
- UINT16 MfgId;
- /** Module part number for DRR3 is 18 bytes
- but DRR4 is 20 bytes as per JEDEC Spec, so
- reserving 20 bytes **/
- UINT8 ModulePartNum[20];
-} DIMM_INFO;
-
-typedef struct {
- UINT8 ChannelId;
- UINT8 DimmCount;
- DIMM_INFO DimmInfo[MAX_DIMMS_NUM];
-} CHANNEL_INFO;
-
-typedef struct {
- UINT8 Revision;
- UINT8 DataWidth;
- /** As defined in SMBIOS 3.0 spec
- Section 7.18.2 and Table 75
- **/
- UINT8 MemoryType;
- UINT16 MemoryFrequencyInMHz;
- /** As defined in SMBIOS 3.0 spec
- Section 7.17.3 and Table 72
- **/
- UINT8 ErrorCorrectionType;
- UINT8 ChannelCount;
- CHANNEL_INFO ChannelInfo[MAX_CHANNELS_NUM];
-} FSP_SMBIOS_MEMORY_INFO;
-
-
-
-typedef struct {
-/** Offset 0x0020
-**/
- UINT64 Signature;
-/** Offset 0x0028
-**/
- UINT8 Revision;
-/** Offset 0x0029
-**/
- UINT8 UnusedUpdSpace2[7];
-/** Offset 0x0030
- Tseg Size
- Size of SMRAM memory reserved.
-**/
- UINT16 PcdMrcInitTsegSize;
-/** Offset 0x0032
- MMIO Size
- Size of memory address space reserved for MMIO (Memory Mapped I/O).
-**/
- UINT16 PcdMrcInitMmioSize;
-/** Offset 0x0034
- DIMM 0 SPD SMBus Address
- SPD Address of DIMM.
-**/
- UINT8 PcdMrcInitSpdAddr1;
-/** Offset 0x0035
- DIMM 1 SPD SMBus Address
- SPD Address of DIMM.
-**/
- UINT8 PcdMrcInitSpdAddr2;
-/** Offset 0x0036
-**/
- UINT8 PcdMemChannel0Config;
-/** Offset 0x0037
-**/
- UINT8 PcdMemChannel1Config;
-/** Offset 0x0038
-**/
- UINT32 PcdMemorySpdPtr;
-/** Offset 0x003C
- Internal Graphics Pre-allocated Memory
- Size of memory preallocated for internal graphics
-**/
- UINT8 PcdIgdDvmt50PreAlloc;
-/** Offset 0x003D
- Aperture Size
- Select the Aperture Size.
-**/
- UINT8 PcdApertureSize;
-/** Offset 0x003E
- GTT Size
- Select the GTT Size.
-**/
- UINT8 PcdGttSize;
-/** Offset 0x003F
- Enable Legacy E/F segments decoding to ROM
- If disabled, E0000h-FFFFFh decoding will be routed to DRAM.
-**/
- UINT8 PcdLegacySegDecode;
-/** Offset 0x0040
- Enable DVFS
- Enable/disable DVFS.
-**/
- UINT8 PcdDvfsEnable;
-/** Offset 0x0041
- MemoryType
- To Configure Memory Type
-**/
- UINT8 PcdMemoryTypeEnable;
-/** Offset 0x0042
- CaMirrorEn
- To Enable/Disable CaMirrorEn
-**/
- UINT8 PcdCaMirrorEn;
-/** Offset 0x0043
- DDR3 Auto Self Refresh
- Enable/Disable DDR3 Auto Self Refresh
-**/
- UINT8 PcdDdr3AutoSelfRefreshEnable;
-/** Offset 0x0044
-**/
- UINT8 ReservedMemoryInitUpd[188];
-} MEMORY_INIT_UPD;
-
-typedef struct {
-/** Offset 0x0100
-**/
- UINT64 Signature;
-/** Offset 0x0108
-**/
- UINT8 Revision;
-/** Offset 0x0109
-**/
- UINT8 UnusedUpdSpace3[7];
-/** Offset 0x0110
- SD Card Mode
- SD Card Mode
-**/
- UINT8 PcdSdcardMode;
-/** Offset 0x0111
- Enable HSUART0
- Enable/disable HSUART0.
-**/
- UINT8 PcdEnableHsuart0;
-/** Offset 0x0112
- Enable HSUART1
- Enable/disable HSUART1.
-**/
- UINT8 PcdEnableHsuart1;
-/** Offset 0x0113
- Enable Azalia
- Enable/disable Azalia controller.
-**/
- UINT8 PcdEnableAzalia;
-/** Offset 0x0114
-**/
- BL_PCH_AZALIA_CONFIG* AzaliaConfigPtr;
-/** Offset 0x0118
- Enable SATA
- Enable/disable SATA controller.
-**/
- UINT8 PcdEnableSata;
-/** Offset 0x0119
- Enable XHCI
- Enable/disable XHCI controller.
-**/
- UINT8 PcdEnableXhci;
-/** Offset 0x011A
- Enable LPE
- Choose LPE Mode.
-**/
- UINT8 PcdEnableLpe;
-/** Offset 0x011B
- Enable DMA0
- Enable/disable DMA0.
-**/
- UINT8 PcdEnableDma0;
-/** Offset 0x011C
- Enable DMA1
- Enable/disable DMA1.
-**/
- UINT8 PcdEnableDma1;
-/** Offset 0x011D
- Enable I2C0
- Enable/disable I2C0.
-**/
- UINT8 PcdEnableI2C0;
-/** Offset 0x011E
- Enable I2C1
- Enable/disable I2C1.
-**/
- UINT8 PcdEnableI2C1;
-/** Offset 0x011F
- Enable I2C2
- Enable/disable I2C2.
-**/
- UINT8 PcdEnableI2C2;
-/** Offset 0x0120
- Enable I2C3
- Enable/disable I2C3.
-**/
- UINT8 PcdEnableI2C3;
-/** Offset 0x0121
- Enable I2C4
- Enable/disable I2C4.
-**/
- UINT8 PcdEnableI2C4;
-/** Offset 0x0122
- Enable I2C5
- Enable/disable I2C5.
-**/
- UINT8 PcdEnableI2C5;
-/** Offset 0x0123
- Enable I2C6
- Enable/disable I2C6.
-**/
- UINT8 PcdEnableI2C6;
-/** Offset 0x0124
-**/
- UINT32 GraphicsConfigPtr;
-/** Offset 0x0128
-**/
- BL_GPIO_FAMILY_INIT* GpioFamilyInitTablePtr;
-/** Offset 0x012C
-**/
- BL_GPIO_PAD_INIT* GpioPadInitTablePtr;
-/** Offset 0x0130
-**/
- UINT8 PunitPwrConfigDisable;
-/** Offset 0x0131
-**/
- UINT8 ChvSvidConfig;
-/** Offset 0x0132
-**/
- UINT8 DptfDisable;
-/** Offset 0x0133
- eMMC Mode
- EMMC Mode
-**/
- UINT8 PcdEmmcMode;
-/** Offset 0x0134
-**/
- UINT8 PcdUsb3ClkSsc;
-/** Offset 0x0135
-**/
- UINT8 PcdDispClkSsc;
-/** Offset 0x0136
-**/
- UINT8 PcdSataClkSsc;
-/** Offset 0x0137
-**/
- UINT8 Usb2Port0PerPortPeTxiSet;
-/** Offset 0x0138
-**/
- UINT8 Usb2Port0PerPortTxiSet;
-/** Offset 0x0139
-**/
- UINT8 Usb2Port0IUsbTxEmphasisEn;
-/** Offset 0x013A
-**/
- UINT8 Usb2Port0PerPortTxPeHalf;
-/** Offset 0x013B
-**/
- UINT8 Usb2Port1PerPortPeTxiSet;
-/** Offset 0x013C
-**/
- UINT8 Usb2Port1PerPortTxiSet;
-/** Offset 0x013D
-**/
- UINT8 Usb2Port1IUsbTxEmphasisEn;
-/** Offset 0x013E
-**/
- UINT8 Usb2Port1PerPortTxPeHalf;
-/** Offset 0x013F
-**/
- UINT8 Usb2Port2PerPortPeTxiSet;
-/** Offset 0x0140
-**/
- UINT8 Usb2Port2PerPortTxiSet;
-/** Offset 0x0141
-**/
- UINT8 Usb2Port2IUsbTxEmphasisEn;
-/** Offset 0x0142
-**/
- UINT8 Usb2Port2PerPortTxPeHalf;
-/** Offset 0x0143
-**/
- UINT8 Usb2Port3PerPortPeTxiSet;
-/** Offset 0x0144
-**/
- UINT8 Usb2Port3PerPortTxiSet;
-/** Offset 0x0145
-**/
- UINT8 Usb2Port3IUsbTxEmphasisEn;
-/** Offset 0x0146
-**/
- UINT8 Usb2Port3PerPortTxPeHalf;
-/** Offset 0x0147
-**/
- UINT8 Usb2Port4PerPortPeTxiSet;
-/** Offset 0x0148
-**/
- UINT8 Usb2Port4PerPortTxiSet;
-/** Offset 0x0149
-**/
- UINT8 Usb2Port4IUsbTxEmphasisEn;
-/** Offset 0x014A
-**/
- UINT8 Usb2Port4PerPortTxPeHalf;
-/** Offset 0x014B
-**/
- UINT8 Usb3Lane0Ow2tapgen2deemph3p5;
-/** Offset 0x014C
-**/
- UINT8 Usb3Lane1Ow2tapgen2deemph3p5;
-/** Offset 0x014D
-**/
- UINT8 Usb3Lane2Ow2tapgen2deemph3p5;
-/** Offset 0x014E
-**/
- UINT8 Usb3Lane3Ow2tapgen2deemph3p5;
-/** Offset 0x014F
- SATA Interface Speed
- Select SATA controller Interface Speed.
-**/
- UINT8 PcdSataInterfaceSpeed;
-/** Offset 0x0150
-**/
- UINT8 PcdPchUsbSsicPort;
-/** Offset 0x0151
-**/
- UINT8 PcdPchUsbHsicPort;
-/** Offset 0x0152
-**/
- UINT8 PcdPcieRootPortSpeed;
-/** Offset 0x0153
-**/
- UINT8 PcdPchSsicEnable;
-/** Offset 0x0154
-**/
- UINT32 PcdLogoPtr;
-/** Offset 0x0158
-**/
- UINT32 PcdLogoSize;
-/** Offset 0x015C
-**/
- UINT8 PcdRtcLock;
-/** Offset 0x015D
- PMIC I2c Bus Number
- I2c Bus Number to communicate with PMIC
-**/
- UINT8 PMIC_I2CBus;
-/** Offset 0x015E
- Enable ISP
- Enable/disable ISP.
-**/
- UINT8 ISPEnable;
-/** Offset 0x015F
- Select ISP Device Number
- Select ISP PCI Device Configuration
-**/
- UINT8 ISPPciDevConfig;
-/** Offset 0x0160
- Processor Turbo Mode
- Enable/disable Processor Turbo Mode.
-**/
- UINT8 PcdTurboMode;
-/** Offset 0x0161
- Pnp Setting Type
- Select Pnp type
-**/
- UINT8 PcdPnpSettings;
-/** Offset 0x0162
- SdDetectChk
- Check for Sd card detect
-**/
- UINT8 PcdSdDetectChk;
-/** Offset 0x0163
-**/
- UINT8 ReservedSiliconInitUpd[411];
-} SILICON_INIT_UPD;
-
-#define FSP_UPD_SIGNATURE 0x2444505557534224 /* '$BSWUPD$' */
-#define FSP_MEMORY_INIT_UPD_SIGNATURE 0x244450554D454D24 /* '$MEMUPD$' */
-#define FSP_SILICON_INIT_UPD_SIGNATURE 0x244450555F495324 /* '$SI_UPD$' */
-
-typedef struct _UPD_DATA_REGION {
-/** Offset 0x0000
-**/
- UINT64 Signature;
-/** Offset 0x0008
-**/
- UINT8 Revision;
-/** Offset 0x0009
-**/
- UINT8 UnusedUpdSpace0[7];
-/** Offset 0x0010
-**/
- UINT32 MemoryInitUpdOffset;
-/** Offset 0x0014
-**/
- UINT32 SiliconInitUpdOffset;
-/** Offset 0x0018
-**/
- UINT64 UnusedUpdSpace1;
-/** Offset 0x0020
-**/
- MEMORY_INIT_UPD MemoryInitUpd;
-/** Offset 0x0100
-**/
- SILICON_INIT_UPD SiliconInitUpd;
-/** Offset 0x02FE
-**/
- UINT16 PcdRegionTerminator;
-} UPD_DATA_REGION;
-
-#define FSP_IMAGE_ID 0x2450534657534224 /* '$BSWFSP$' */
-#define FSP_IMAGE_REV 0x01010401
-
-typedef struct _VPD_DATA_REGION {
-/** Offset 0x0000
-**/
- UINT64 PcdVpdRegionSign;
-/** Offset 0x0008
- PcdImageRevision
-**/
- UINT32 PcdImageRevision;
-/** Offset 0x000C
-**/
- UINT32 PcdUpdRegionOffset;
-} VPD_DATA_REGION;
-
-#pragma pack()
-
-#endif
+/** @file
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPDVPD_H__
+#define __FSPUPDVPD_H__
+
+#pragma pack(1)
+
+
+#define MAX_CHANNELS_NUM 2
+#define MAX_DIMMS_NUM 2
+
+typedef struct {
+ UINT32 VendorDeviceId;
+ UINT16 SubSystemId;
+ UINT8 RevisionId; /// 0xFF applies to all steppings
+ UINT8 FrontPanelSupport;
+ UINT16 NumberOfRearJacks;
+ UINT16 NumberOfFrontJacks;
+} BL_PCH_AZALIA_VERB_TABLE_HEADER;
+
+typedef struct {
+ BL_PCH_AZALIA_VERB_TABLE_HEADER VerbTableHeader;
+ UINT32 *VerbTableData;
+} BL_PCH_AZALIA_VERB_TABLE;
+
+typedef struct {
+ UINT8 Pme : 1; /// 0: Disable; 1: Enable
+ UINT8 DS : 1; /// 0: Docking is not supported; 1:Docking is supported
+ UINT8 DA : 1; /// 0: Docking is not attached; 1:Docking is attached
+ UINT8 HdmiCodec : 1; /// 0: Disable; 1: Enable
+ UINT8 AzaliaVCi : 1; /// 0: Disable; 1: Enable
+ UINT8 Rsvdbits : 3;
+ UINT8 AzaliaVerbTableNum; /// Number of verb tables provided by platform
+ BL_PCH_AZALIA_VERB_TABLE *AzaliaVerbTable; /// Pointer to the actual verb table(s)
+ UINT16 ResetWaitTimer; /// The delay timer after Azalia reset, the value is number of microseconds
+} BL_PCH_AZALIA_CONFIG;
+
+typedef struct {
+ UINT32 Confg;
+ UINT32 ConfgChanges;
+ UINT32 Misc;
+ UINT32 MmioAddr;
+ CHAR16 *Name;
+} BL_GPIO_FAMILY_INIT;
+
+typedef struct {
+ UINT32 Confg0;
+ UINT32 Confg0Changes;
+ UINT32 Confg1;
+ UINT32 Confg1Changes;
+ UINT32 Community;
+ UINT32 MmioAddr;
+ CHAR16 *Name;
+ UINT32 Misc;
+} BL_GPIO_PAD_INIT;
+
+typedef struct {
+ UINT8 DimmId;
+ UINT32 SizeInMb;
+ UINT16 MfgId;
+ /** Module part number for DRR3 is 18 bytes
+ but DRR4 is 20 bytes as per JEDEC Spec, so
+ reserving 20 bytes **/
+ UINT8 ModulePartNum[20];
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 ChannelId;
+ UINT8 DimmCount;
+ DIMM_INFO DimmInfo[MAX_DIMMS_NUM];
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT8 DataWidth;
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType;
+ UINT16 MemoryFrequencyInMHz;
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+ UINT8 ChannelCount;
+ CHANNEL_INFO ChannelInfo[MAX_CHANNELS_NUM];
+} FSP_SMBIOS_MEMORY_INFO;
+
+
+
+typedef struct {
+/** Offset 0x0020
+**/
+ UINT64 Signature;
+/** Offset 0x0028
+**/
+ UINT8 Revision;
+/** Offset 0x0029
+**/
+ UINT8 UnusedUpdSpace2[7];
+/** Offset 0x0030
+ Tseg Size
+ Size of SMRAM memory reserved.
+**/
+ UINT16 PcdMrcInitTsegSize;
+/** Offset 0x0032
+ MMIO Size
+ Size of memory address space reserved for MMIO (Memory Mapped I/O).
+**/
+ UINT16 PcdMrcInitMmioSize;
+/** Offset 0x0034
+ DIMM 0 SPD SMBus Address
+ SPD Address of DIMM.
+**/
+ UINT8 PcdMrcInitSpdAddr1;
+/** Offset 0x0035
+ DIMM 1 SPD SMBus Address
+ SPD Address of DIMM.
+**/
+ UINT8 PcdMrcInitSpdAddr2;
+/** Offset 0x0036
+**/
+ UINT8 PcdMemChannel0Config;
+/** Offset 0x0037
+**/
+ UINT8 PcdMemChannel1Config;
+/** Offset 0x0038
+**/
+ UINT32 PcdMemorySpdPtr;
+/** Offset 0x003C
+ Internal Graphics Pre-allocated Memory
+ Size of memory preallocated for internal graphics
+**/
+ UINT8 PcdIgdDvmt50PreAlloc;
+/** Offset 0x003D
+ Aperture Size
+ Select the Aperture Size.
+**/
+ UINT8 PcdApertureSize;
+/** Offset 0x003E
+ GTT Size
+ Select the GTT Size.
+**/
+ UINT8 PcdGttSize;
+/** Offset 0x003F
+ Enable Legacy E/F segments decoding to ROM
+ If disabled, E0000h-FFFFFh decoding will be routed to DRAM.
+**/
+ UINT8 PcdLegacySegDecode;
+/** Offset 0x0040
+ Enable DVFS
+ Enable/disable DVFS.
+**/
+ UINT8 PcdDvfsEnable;
+/** Offset 0x0041
+ MemoryType
+ To Configure Memory Type
+**/
+ UINT8 PcdMemoryTypeEnable;
+/** Offset 0x0042
+ CaMirrorEn
+ To Enable/Disable CaMirrorEn
+**/
+ UINT8 PcdCaMirrorEn;
+/** Offset 0x0043
+**/
+ UINT8 ReservedMemoryInitUpd[189];
+} MEMORY_INIT_UPD;
+
+typedef struct {
+/** Offset 0x0100
+**/
+ UINT64 Signature;
+/** Offset 0x0108
+**/
+ UINT8 Revision;
+/** Offset 0x0109
+**/
+ UINT8 UnusedUpdSpace3[7];
+/** Offset 0x0110
+ SD Card Mode
+ SD Card Mode
+**/
+ UINT8 PcdSdcardMode;
+/** Offset 0x0111
+ Enable HSUART0
+ Enable/disable HSUART0.
+**/
+ UINT8 PcdEnableHsuart0;
+/** Offset 0x0112
+ Enable HSUART1
+ Enable/disable HSUART1.
+**/
+ UINT8 PcdEnableHsuart1;
+/** Offset 0x0113
+ Enable Azalia
+ Enable/disable Azalia controller.
+**/
+ UINT8 PcdEnableAzalia;
+/** Offset 0x0114
+**/
+ BL_PCH_AZALIA_CONFIG* AzaliaConfigPtr;
+/** Offset 0x0118
+ Enable SATA
+ Enable/disable SATA controller.
+**/
+ UINT8 PcdEnableSata;
+/** Offset 0x0119
+ Enable XHCI
+ Enable/disable XHCI controller.
+**/
+ UINT8 PcdEnableXhci;
+/** Offset 0x011A
+ Enable LPE
+ Choose LPE Mode.
+**/
+ UINT8 PcdEnableLpe;
+/** Offset 0x011B
+ Enable DMA0
+ Enable/disable DMA0.
+**/
+ UINT8 PcdEnableDma0;
+/** Offset 0x011C
+ Enable DMA1
+ Enable/disable DMA1.
+**/
+ UINT8 PcdEnableDma1;
+/** Offset 0x011D
+ Enable I2C0
+ Enable/disable I2C0.
+**/
+ UINT8 PcdEnableI2C0;
+/** Offset 0x011E
+ Enable I2C1
+ Enable/disable I2C1.
+**/
+ UINT8 PcdEnableI2C1;
+/** Offset 0x011F
+ Enable I2C2
+ Enable/disable I2C2.
+**/
+ UINT8 PcdEnableI2C2;
+/** Offset 0x0120
+ Enable I2C3
+ Enable/disable I2C3.
+**/
+ UINT8 PcdEnableI2C3;
+/** Offset 0x0121
+ Enable I2C4
+ Enable/disable I2C4.
+**/
+ UINT8 PcdEnableI2C4;
+/** Offset 0x0122
+ Enable I2C5
+ Enable/disable I2C5.
+**/
+ UINT8 PcdEnableI2C5;
+/** Offset 0x0123
+ Enable I2C6
+ Enable/disable I2C6.
+**/
+ UINT8 PcdEnableI2C6;
+/** Offset 0x0124
+**/
+ UINT32 GraphicsConfigPtr;
+/** Offset 0x0128
+**/
+ BL_GPIO_FAMILY_INIT* GpioFamilyInitTablePtr;
+/** Offset 0x012C
+**/
+ BL_GPIO_PAD_INIT* GpioPadInitTablePtr;
+/** Offset 0x0130
+**/
+ UINT8 PunitPwrConfigDisable;
+/** Offset 0x0131
+**/
+ UINT8 ChvSvidConfig;
+/** Offset 0x0132
+**/
+ UINT8 DptfDisable;
+/** Offset 0x0133
+ eMMC Mode
+ EMMC Mode
+**/
+ UINT8 PcdEmmcMode;
+/** Offset 0x0134
+**/
+ UINT8 PcdUsb3ClkSsc;
+/** Offset 0x0135
+**/
+ UINT8 PcdDispClkSsc;
+/** Offset 0x0136
+**/
+ UINT8 PcdSataClkSsc;
+/** Offset 0x0137
+**/
+ UINT8 Usb2Port0PerPortPeTxiSet;
+/** Offset 0x0138
+**/
+ UINT8 Usb2Port0PerPortTxiSet;
+/** Offset 0x0139
+**/
+ UINT8 Usb2Port0IUsbTxEmphasisEn;
+/** Offset 0x013A
+**/
+ UINT8 Usb2Port0PerPortTxPeHalf;
+/** Offset 0x013B
+**/
+ UINT8 Usb2Port1PerPortPeTxiSet;
+/** Offset 0x013C
+**/
+ UINT8 Usb2Port1PerPortTxiSet;
+/** Offset 0x013D
+**/
+ UINT8 Usb2Port1IUsbTxEmphasisEn;
+/** Offset 0x013E
+**/
+ UINT8 Usb2Port1PerPortTxPeHalf;
+/** Offset 0x013F
+**/
+ UINT8 Usb2Port2PerPortPeTxiSet;
+/** Offset 0x0140
+**/
+ UINT8 Usb2Port2PerPortTxiSet;
+/** Offset 0x0141
+**/
+ UINT8 Usb2Port2IUsbTxEmphasisEn;
+/** Offset 0x0142
+**/
+ UINT8 Usb2Port2PerPortTxPeHalf;
+/** Offset 0x0143
+**/
+ UINT8 Usb2Port3PerPortPeTxiSet;
+/** Offset 0x0144
+**/
+ UINT8 Usb2Port3PerPortTxiSet;
+/** Offset 0x0145
+**/
+ UINT8 Usb2Port3IUsbTxEmphasisEn;
+/** Offset 0x0146
+**/
+ UINT8 Usb2Port3PerPortTxPeHalf;
+/** Offset 0x0147
+**/
+ UINT8 Usb2Port4PerPortPeTxiSet;
+/** Offset 0x0148
+**/
+ UINT8 Usb2Port4PerPortTxiSet;
+/** Offset 0x0149
+**/
+ UINT8 Usb2Port4IUsbTxEmphasisEn;
+/** Offset 0x014A
+**/
+ UINT8 Usb2Port4PerPortTxPeHalf;
+/** Offset 0x014B
+**/
+ UINT8 Usb3Lane0Ow2tapgen2deemph3p5;
+/** Offset 0x014C
+**/
+ UINT8 Usb3Lane1Ow2tapgen2deemph3p5;
+/** Offset 0x014D
+**/
+ UINT8 Usb3Lane2Ow2tapgen2deemph3p5;
+/** Offset 0x014E
+**/
+ UINT8 Usb3Lane3Ow2tapgen2deemph3p5;
+/** Offset 0x014F
+ SATA Interface Speed
+ Select SATA controller Interface Speed.
+**/
+ UINT8 PcdSataInterfaceSpeed;
+/** Offset 0x0150
+**/
+ UINT8 PcdPchUsbSsicPort;
+/** Offset 0x0151
+**/
+ UINT8 PcdPchUsbHsicPort;
+/** Offset 0x0152
+**/
+ UINT8 PcdPcieRootPortSpeed;
+/** Offset 0x0153
+**/
+ UINT8 PcdPchSsicEnable;
+/** Offset 0x0154
+**/
+ UINT32 PcdLogoPtr;
+/** Offset 0x0158
+**/
+ UINT32 PcdLogoSize;
+/** Offset 0x015C
+**/
+ UINT8 PcdRtcLock;
+/** Offset 0x015D
+ PMIC I2c Bus Number
+ I2c Bus Number to communicate with PMIC
+**/
+ UINT8 PMIC_I2CBus;
+/** Offset 0x015E
+ Enable ISP
+ Enable/disable ISP.
+**/
+ UINT8 ISPEnable;
+/** Offset 0x015F
+ Select ISP Device Number
+ Select ISP PCI Device Configuration
+**/
+ UINT8 ISPPciDevConfig;
+/** Offset 0x0160
+ Processor Turbo Mode
+ Enable/disable Processor Turbo Mode.
+**/
+ UINT8 PcdTurboMode;
+/** Offset 0x0161
+ Pnp-Power & Performance
+ select Pnp type
+**/
+ UINT8 PcdPnpSettings;
+/** Offset 0x0162
+ SdDetectChk
+ Check for Sd card detect
+**/
+ UINT8 PcdSdDetectChk;
+/** Offset 0x0163
+**/
+ UINT8 ReservedSiliconInitUpd[411];
+} SILICON_INIT_UPD;
+
+#define FSP_UPD_SIGNATURE 0x2444505557534224 /* '$BSWUPD$' */
+#define FSP_MEMORY_INIT_UPD_SIGNATURE 0x244450554D454D24 /* '$MEMUPD$' */
+#define FSP_SILICON_INIT_UPD_SIGNATURE 0x244450555F495324 /* '$SI_UPD$' */
+
+typedef struct _UPD_DATA_REGION {
+/** Offset 0x0000
+**/
+ UINT64 Signature;
+/** Offset 0x0008
+**/
+ UINT8 Revision;
+/** Offset 0x0009
+**/
+ UINT8 UnusedUpdSpace0[7];
+/** Offset 0x0010
+**/
+ UINT32 MemoryInitUpdOffset;
+/** Offset 0x0014
+**/
+ UINT32 SiliconInitUpdOffset;
+/** Offset 0x0018
+**/
+ UINT64 UnusedUpdSpace1;
+/** Offset 0x0020
+**/
+ MEMORY_INIT_UPD MemoryInitUpd;
+/** Offset 0x0100
+**/
+ SILICON_INIT_UPD SiliconInitUpd;
+/** Offset 0x02FE
+**/
+ UINT16 PcdRegionTerminator;
+} UPD_DATA_REGION;
+
+#define FSP_IMAGE_ID 0x2450534657534224 /* '$BSWFSP$' */
+#define FSP_IMAGE_REV 0x01010200
+
+typedef struct _VPD_DATA_REGION {
+/** Offset 0x0000
+**/
+ UINT64 PcdVpdRegionSign;
+/** Offset 0x0008
+ PcdImageRevision
+**/
+ UINT32 PcdImageRevision;
+/** Offset 0x000C
+**/
+ UINT32 PcdUpdRegionOffset;
+} VPD_DATA_REGION;
+
+#pragma pack()
+
+#endif
diff --git a/ReadMe.MD b/ReadMe.MD
index df6a96f..eee620e 100644
--- a/ReadMe.MD
+++ b/ReadMe.MD
@@ -34,20 +34,20 @@ This code combines elements from github, intel.com/fsp and firmware.intel.com
3) Get the BaseTools binary:
a. git clone https://github.com/tianocore/edk2-BaseTools-win32.git
b. git checkout ea691aec89b06aa83474100df1de000a875b4ea0
- c. Put BaseTools Binary "edk2-BaseTools-win32" into MyWorkspace\edk2-platforms\BaseTools\Bin�,
- d. Change folder name from "C:\MyWorkspace\edk2-platforms\BaseTools\Bin\edk2-BaseTools-win32�
- to "C:\MyWorkspace\edk2-platforms\BaseTools\Bin\win32�
-
-4) Download the 'Intel(R) Firmware Support Package for Intel(R) Pentium(R) and Celeron(R)
- Processor N3000 Product Families and Intel(R) Atom� x5-E8000 Processor'
- (BSW_MR1) from http://intel.com/fsp
+ c. Put BaseTools Binary "edk2-BaseTools-win32" into MyWorkspace\edk2-platforms\BaseTools\Bin",
+ d. Change folder name from "C:\MyWorkspace\edk2-platforms\BaseTools\Bin\edk2-BaseTools-win32"
+ to "C:\MyWorkspace\edk2-platforms\BaseTools\Bin\win32"
+
+4) Get the 'Intel(R) Firmware Support Package for Intel(R) Pentium(R) and Celeron(R)
+ Processor N3000 Product Families and Intel(R) Atom(TM) x5-E8000 Processor' from
+ https://github.com/IntelFsp/FSP/tree/Braswell :
+ git clone -b Braswell https://github.com/IntelFsp/FSP.git
-5) Run the Intel(R) FSP installer and copy the following files into the Workspace:
- a. Default install directory: "C:\Program Files (x86)\Braswell FSP Kit MR1\FSP"
- b. Copy FspUpdVpd.h into the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg\Include" directory.
- c. Create the "FspBinary" sub-directory under the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg"
+5) Copy the following files into the Workspace:
+ a. Copy FspUpdVpd.h into the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg\Include" directory.
+ b. Create the "FspBinary" sub-directory under the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg"
directory, if it does not exist ("C:\MyWorkspace\edk2-platforms\ChvFspBinPkg\FspBinary").
- d. Copy BSWFSP.fd into the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg\FspBinary" directory.
+ c. Copy BSWFSP.fd into the "C:\MyWorkspace\edk2-platforms\ChvFspBinPkg\FspBinary" directory.
6) Download the 'BraswellPlatformPkg' package from firmware.intel.com:
https://firmware.intel.com/projects/braswell-uefi
--
2.8.1.windows.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2016-08-18 3:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-18 3:12 [PATCH 1/2] BraswellPlatformPkg: Use FSP binary from GitHub Guo, Mang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox