From: "Guo, Mang" <mang.guo@intel.com>
To: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Wei, David" <david.wei@intel.com>,
"Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Subject: [Patch][edk2-platforms/minnowboard-max-udk2015] Changed ReadMe.MD
Date: Wed, 19 Jul 2017 06:17:34 +0000 [thread overview]
Message-ID: <22D2C85ED001C54AA20BFE3B0E4751D15252135B@SHSMSX103.ccr.corp.intel.com> (raw)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
---
ReadMe.MD | 83 ++++-----------------------------------------------------------
1 file changed, 5 insertions(+), 78 deletions(-)
diff --git a/ReadMe.MD b/ReadMe.MD
index 63f3219..4abead1 100644
--- a/ReadMe.MD
+++ b/ReadMe.MD
@@ -1,83 +1,10 @@
-
-This code base is designed for the MinnowBoard Max/Turbot platforms using the Intel(R) Atom(tm) Processor E3800 Series.
-This code base is based on UDK2015 core packages.
+# MINNOWBOARD MAX/TURBOT PLATFORM FIRMWARE
-# INDEX
+This UEFI firmware is designed for the open hardware MinnowBoard Max/Turbot platforms using
+the Intel(R) Atom(tm) Processor E3800 Series, based on UDK2015 core packages.
-1. HOW TO CREATE A FULL SOURCE TREE
-2. HOW TO BUILD (WINDOWS ENVIRONMENT)
-3. MAINTAINERS
+http://minnowboard.org/ -- Platform Information, including schematics and information on where to purchase boards.
-## 1. HOW TO CREATE A FULL SOURCE TREE
+https://firmware.intel.com/projects/minnowboard-max -- Release notes, pre-built release/debug binaries, build instructions, and binary objects required to compile firmware.
-1. Get Release Notes and Binary Object Modules from https://firmware.intel.com/projects/minnowboard-max
-
- Follow the instructions in the Release Notes to create a full source tree.
-
-## 2. HOW TO BUILD (WINDOWS ENVIRONMENT)
-
-Windows System Configuration:
- Microsoft Windows 7 Ultimate 64-bit*
-
-1. Setup Build Environment
-
- 1. Install Visual Studio 2008/2010/2012/2013 on the build machine.
-
- 2. Install the latest Python 2 Release from: https://www.python.org/downloads/windows/
- * Make sure that a file with the extension of ".py" will be opened by Python.exe.
-
-2. Extract Source Code
- 1. Follow the instructions of "HOW TO CREATE A FULL SOURCE TREE" (step 2 above)
- to create a full source tree.
-
- 2. Follow the instructions found in the file "Patch-HOWTO.txt" located in your
- workspace (e.g. "C:\MyWorkspace\CryptoPkg\Library\OpensslLib\Patch-HOWTO.txt")
- to install the Openssl source code.
-
-3. Install the iasl compiler by downloading iasl-win-20141107.zip from the following
- location: "https://acpica.org/downloads/version-20141107" and place the unzipped
- content ("iasl.exe") into the directory "C:\ASL" on your local hard drive
- (create the folder "C:\ASL" if it does not exist).
-
-4a. Build Steps (32-bit)
-
- 1. To build a 32-bit release version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg`
- * Type the command: `Build_IFWI.bat /IA32 MNW2 Release` to build a release version.
-
- 2. To build a 32-bit debug version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg`
- * Type the command: `Build_IFWI.bat /IA32 MNW2 Debug` to build a debug version.
-
- 3. After the build successfully completes, the 8MB firmware binary image will be located in the
- following location on your local hard drive:
-
- "C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg\Stitch\"
-
-4b. Build Steps (64-bit)
-
- 1. To build a 64-bit release version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg`
- * Type the command: `Build_IFWI.bat MNW2 Release` to build a release version.
-
- 2. To build a 64-bit debug version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg`
- * Type the command: `Build_IFWI.bat MNW2 Debug` to build a debug version.
-
- 3. After the build successfully completes, the 8MB firmware binary image will be located in the
- following location on your local hard drive:
-
- "C:\MyWorkspace\edk2-platforms\Vlv2TbltDevicePkg\Stitch\"
-
-## MAINTAINERS
-
-* david.wei@intel.com
-* mang.guo@intel.com
-* vincent.zimmer@intel.com
-* mike.wu@intel.com
-* shifeix.a.lu@intel.com
--
2.10.1.windows.1
reply other threads:[~2017-07-19 6:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=22D2C85ED001C54AA20BFE3B0E4751D15252135B@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox