[Patch][edk2-platforms/devel-MinnowBoard3-UDK2017] Update ReadMe.MD

["Guo, Mang" <mang.guo@intel.com>]

Contributed-under: TianoCore Contribution Agreement 1.1

Signed-off-by: Guo Mang <mang.guo@intel.com>
---
 ReadMe.MD | 178 ++++++++------------------------------------------------------
 1 file changed, 21 insertions(+), 157 deletions(-)

diff --git a/ReadMe.MD b/ReadMe.MD
index a42260e..3c35cbd 100644
--- a/ReadMe.MD
+++ b/ReadMe.MD
@@ -1,172 +1,37 @@
-
-This code base is designed for the MinnowBoard v3 platform using the Intel(R) Atom(tm) Processor E3900 Series.
-This code base is based on UDK2017 core packages.
+# MinnowBoard 3 and Leaf Hill CRB Platform
 
-# INDEX
+This codebase is designed for the MinnowBoard 3 platform and Leaf Hill Customer Reference Board (CRB), using the [Intel Atom(R) Processor E3900 Series](https://www.intel.com/content/www/us/en/embedded/products/apollo-lake/overview.html) (formerly Apollo Lake).
 
-1.  HOW TO CREATE A FULL SOURCE TREE
-2.  HOW TO BUILD (WINDOWS ENVIRONMENT)
-3.  MAINTAINERS
+## Codebase Overview
 
-## 1. HOW TO CREATE A FULL SOURCE TREE
+This codebase is based on UDK2017 core packages, [Intel(R) Firmware Support Package](https://github.com/IntelFsp/FSP.git)
+(Intel(R) FSP), [UEFI UNDI driver](https://downloadcenter.intel.com/download/19186/Intel-Ethernet-Connections-Boot-Utility-Preboot-Images-and-EFI-Drivers)
+for Intel Ethernet Controllers, and pre-compiled binary objects required for the final Integrated Firmware Image (IFWI).
 
-1. Create a new folder (directory) on the root of your local development machine
-   for use as your work space (this example uses "C:\MyWorkspace").
+Additional information on this project is available at [firmware.intel.com](https://firmware.intel.com/projects/minnowboard3).
 
-   NOTE: Some code paths are very long, and placing the working directory too
-         deep below the ROOT directory may cause the path to be longer than the
-         operating system or file system's maximum path length.
+## Build Instructions
 
-2. Get MinnowBoard v3 branch from GitHub with the following command.
-   * `git clone -b devel-MinnowBoard3-UDK2017 https://github.com/tianocore/edk2-platforms.git`
+Instructions for downloading a source tree and compiling firmware are available in the project release notes at [firmware.intel.com](https://firmware.intel.com/projects/minnowboard3):
+* https://firmware.intel.com/sites/default/files/MinnowBoard3-Rel_0_69-ReleaseNotes.txt
+* https://firmware.intel.com/sites/default/files/LeafHill-Rel_0_69-ReleaseNotes.txt
 
-   Once the download completes, all EDK II packages and files will be found
-   under the "C:\MyWorkspace\edk2-platforms" directory.
+*Note that Release 0.69 added a separate [release notes file for the Leaf Hill CRB](https://firmware.intel.com/sites/default/files/LeafHill-Rel_0_69-ReleaseNotes.txt). Instructions for downloading  the Leaf Hill CRB source tree and compiling an IFWI image differ slightly from MinnowBoard 3.*
 
-3. Get the BaseTools binary and copy them to BaseTools binary folder.
-   1. `git clone https://github.com/tianocore/edk2-BaseTools-win32.git Win32`
-   2. Enter folder Win32
-   3. `git checkout 0e088c19ab31fccd1d2f55d9e4fe0314b57c0097`
-   4. Copy Win32 to the BaseTools Binary folder.
-       (C:\MyWorkspace\edk2-platforms\BaseTools\Bin\)
+This project's build instructions have been validated in the following environments:
+* Microsoft Windows 7 Ultimate 64-bit & Microsoft Windows 10 Enterprise 64-bit with Microsoft Visual Studio 2013/2015
+* Ubuntu Linux 16.04.3.LTS with GCC 5
 
-4. Get the Intel(R) Firmware Support Package(Intel FSP).
-   1. Run `git clone -b ApolloLake https://github.com/IntelFsp/FSP.git` to download FSP
-   2. Enter folder FSP
-   3. Run `git checkout de67689ef6261c1a0ecee01b7312bd635e3435e7`
-   4. Copy the ApolloLakeFspBinPkg to the folder
-      "C:\MyWorkspace\edk2-platforms\Silicon\BroxtonSoC\BroxtonFspPkg"
+## Pre-Compiled Firmware Images
 
-5. Install UEFI UNDI driver:
-      Download PREBOOT.EXE Version 21.1 from the "Intel® Ethernet Connections
-      Boot Utility, Preboot Images, and EFI Drivers" page.
-      https://downloadcenter.intel.com/download/19186/Intel-Ethernet-Connections-Boot-Utility-Preboot-Images-and-EFI-Drivers
+Pre-compiled binary images are available at https://firmware.intel.com/projects/minnowboard3
 
-      Windows user:
-      1. Install PREBOOT.EXE into the default folder (C:\Intel21.1).
-      2. Copy the UEFI x64 PCI-E gigabit driver (C:\Intel21.1\APPS\EFI\EFIx64\E7320X3.EFI) 
-      to the platform package directory below, create the folder if it does not exist:
-        * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Binaries\UNDI\I210PcieUndiDxe"
+This [project](https://firmware.intel.com/projects/minnowboard3) also includes IA32 & x64 'flash update' tools for the UEFI Shell (FirmwareUpdateUtilities).
+These utilities require the 'BIOS Lock' feature to be disabled. Please refer to the release notes for programming instructions.
 
-      Linux user:
-      1. Use command "unzip PREBOOT.EXE" to extract UEFI x64 PCI-E gigabit driver
-      (preboot/APPS/EFI/EFIx64/E7320X3.EFI)
-      2. Copy E7320X3.EFI to platform package directory below, create the folder
-      if it does not exist:
-        * "~/src/MyWorkspace/edk2-platforms/Platform/BroxtonPlatformPkg/Common/Binaries/UNDI/I210PcieUndiDxe"
+## Reporting Issues
 
-6. Follow the instructions found in the "Patch-HOWTO.txt" file located in the Workspace
-   (e.g. "C:\MyWorkspace\edk2-platforms\Core\CryptoPkg\Library\OpensslLib\Patch-HOWTO.txt")
-   to install the OpenSSL source code and enable the CryptoPkg module.
-
-7. Download MinnowBoard v3 Binary Object Modules
-   1. Download the "MinnowBoard_v3-0.63-Binary.Objects.zip" from the project page:
-      * https://firmware.intel.com/projects/minnowboardv3
-   2. Unzip and copy the two folders (FAB_A, FAB_B) into
-      the directory below, and create the folder if it does not exist:
-      * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Binaries\IFWI\MinnowBoard3"
-
-## 2. HOW TO BUILD (WINDOWS ENVIRONMENT)
-
-Windows System Configuration:
-  - Microsoft Windows 7 Ultimate 64-bit*
-
-1. Setup Build Environment
-
-   1. Install Visual Studio 2013/2015 on the build machine.
-
-   2. Install version Python 2.7.10 from: https://www.python.org/downloads/release/python-2710/
-      * Make sure that a file with the extension of ".py" will be opened by Python.exe.
-
-   3. Install the NASM assembly language compiler:
-
-        a. Download NASM 2.12.02 binaries:
-        * http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/win32/nasm-2.12.02-win32.zip
-        * http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/win64/nasm-2.12.02-win64.zip
-
-        b. Unzip the 32-bit & 64-bit versions of nasm.exe to the directories listed below,
-         respectively, and create the folders if they do not exist:
-        * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\nasm\Win32"
-        * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\nasm\Win64"
-
-   4. Install the ACPI Source Language (ASL) compiler:
-
-        a. Install the IASL 2016-09-30 compiler from acpica.org:
-         https://acpica.org/sites/acpica/files/iasl-win-20160930.zip
-
-        b. Unzip the "iasl.exe" file into the directory below, and create the folder
-         if it does not exist:
-         * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Iasl"
-
-2. Build
-
-    2a. Build Steps (32-bit)
-
-    1. To build a 32-bit release version
-      * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
-      * Type the command: `cd C:\MyWorkspace\edk2-platforms`
-      * Type the command: `BuildBIOS.bat /B /VS13 /IA32 Broxton Release` to build a release version.
-        (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
-    2. To build a 32-bit debug version
-      * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
-      * Type the command: `cd C:\MyWorkspace\edk2-platforms`
-      * Type the command: `BuildBIOS.bat /B /VS13 /IA32 Broxton Debug` to build a debug version.
-        (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
-    3. After the build successfully completes, the 8MB firmware binary image will be located in the
-       following location on your local hard drive:
-
-      * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Stitch"
-
-    2b. Build Steps (64-bit)
-
-    1. To build a 64-bit release version
-      * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
-      * Type the command: `cd C:\MyWorkspace\edk2-platforms`
-      * Type the command: `BuildBIOS.bat /B /VS13 /x64 Broxton Release` to build a release version.
-        (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
-    2. To build a 64-bit debug version
-      * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
-      * Type the command: `cd C:\MyWorkspace\edk2-platforms`
-      * Type the command: `BuildBIOS.bat /B /VS13 /x64 Broxton Debug` to build a debug version.
-        (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
-    3. After the build successfully completes, the 8MB firmware binary image will be located in the
-      following location on your local hard drive:
-
-     * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Stitch"
-
-## 3. HOW TO BUILD (LINUX ENVIRONMENT)
-
-Linux System Configuration:
-  - Ubuntu 16.04 64-bit
-  - bash shell
-  - gcc version 5 or above
-
-1. Setup Build Environment
-      Use below command to install required packages:
-      ```
-      # sudo apt-get update
-      # sudo apt-get install nasm
-      # sudo apt-get install iasl
-      # sudo apt-get install build-essential
-      # sudo apt-get install uuid-dev
-      ```
-2. Build Steps (64-bit)
-    1. To build a 64-bit release version
-      * Open a command prompt, type command: `cd ~/src/MyWorkspace/edk2-platforms`;
-      * For MinnowBoard 3 FAB B, type the command:`./BuildBIOS.sh /B Release` to build a release version.
-        (Replace "/B" with "/A" for MinnowBoard 3 FAB A board)
-    2. To build a 64-bit debug version 
-      * Open a command prompt, type command: `cd ~/src/MyWorkspace/edk2-platforms`;
-      * For MinnowBoard 3 FAB B, type the command:`./BuildBIOS.sh /B Debug` to build a debug version.
-        (Replace "/B" with "/A" for MinnowBoard 3 FAB A board)
-    3. After the build successfully completes, the 8MB firmware binary image will be located in the
-       following location on your local hard drive:
-
-     * "~/src/MyWorkspace/edk2-platforms/Platform/BroxtonPlatformPkg/Common/Tools/Stitch/"
+To report issues on this codebase, please use [TianoCore Bugzilla](https://bugzilla.tianocore.org/). For more information, please refer to the [Reporting Issues](https://github.com/tianocore/tianocore.github.io/wiki/Reporting-Issues) entry on the [TianoCore wiki](https://github.com/tianocore/tianocore.github.io/wiki).
 
 ## MAINTAINERS
 
@@ -175,4 +40,3 @@ Linux System Configuration:
 * vincent.zimmer@intel.com
 * mike.wu@intel.com
 * shifeix.a.lu@intel.com
-
-- 
2.10.1.windows.1