* edk2-platform configure serial UART for debugging
[not found] <CAMY4mmmV4Q8DhBB3Wf1KDqjGJ5B=G9NeyTCJu3PoxUjAPBKhNw@mail.gmail.com>
@ 2020-07-10 10:54 ` avinok
2020-07-10 13:35 ` [edk2-devel] " Andrey V
0 siblings, 1 reply; 2+ messages in thread
From: avinok @ 2020-07-10 10:54 UTC (permalink / raw)
To: devel
[-- Attachment #1: Type: text/plain, Size: 389 bytes --]
Hi
I maybe missing some steps, because mostly spent time to use SBL
(slimbootloader) .
I've managed to build Apollo Lake IFWI image for the LeafHill platform.
However, I need to use it for our own board based LeafHill.
How can I configure UART2 to get a serial message ? I can not see the
settings like in coreboot setup or SBL(slim boot)
Can someone help me with that?
Regards,
Andrey
[-- Attachment #2: Type: text/html, Size: 692 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [edk2-devel] edk2-platform configure serial UART for debugging
2020-07-10 10:54 ` edk2-platform configure serial UART for debugging avinok
@ 2020-07-10 13:35 ` Andrey V
0 siblings, 0 replies; 2+ messages in thread
From: Andrey V @ 2020-07-10 13:35 UTC (permalink / raw)
To: Andrey V, devel
[-- Attachment #1: Type: text/plain, Size: 311 bytes --]
the recommendations from: https://software.intel.com/content/dam/develop/external/us/en/documents/uefi-firmware-porting-guide-for-the-intel-atom-processor-e3900-series-820187.pdf
to edit:
gPlatformModuleTokenSpaceGuid.PcdSerialIoUartNumber|2|UINT8|0x10001011
But how can I set UART2 for serial output ?
[-- Attachment #2: Type: text/html, Size: 510 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-10 13:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CAMY4mmmV4Q8DhBB3Wf1KDqjGJ5B=G9NeyTCJu3PoxUjAPBKhNw@mail.gmail.com>
2020-07-10 10:54 ` edk2-platform configure serial UART for debugging avinok
2020-07-10 13:35 ` [edk2-devel] " Andrey V
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox