public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif@nuviainc.com, philmd@redhat.com,
	lintonrjeremy@gmail.com
Subject: Re: [edk2-devel] [PATCH] Platform/RPi/Genet: Add Genet stub driver to setup MAC
Date: Thu, 23 Jan 2020 12:03:23 +0000	[thread overview]
Message-ID: <2695a134-d920-a2d3-d10e-380999dc0dfb@akeo.ie> (raw)
In-Reply-To: <15EC824B064B2D10.12514@groups.io>

**PLEASE DISREGARD THIS PATCH**

I had a couple of extra .patch files in my repo that were inadvertently 
sent with the previous series.

/Pete

On 2020.01.23 12:00, Pete Batard via Groups.Io wrote:
> From: Jeremy Linton <lintonrjeremy@gmail.com>
> 
> The RPi4 has a 1G BCM Genet platform device. In order to
> assist in booting the platform in an ACPI environment, it is
> desirable if the hardware can describe itself rather than
> passing parameters via DSDT/DSD. One way to achieve this
> is to assure that the adapter is preprogrammed with the correct
> ethernet mac address as it would be if the adapter were
> used during the boot process.
> 
> While we currently lack a fully functional uefi driver
> for the genet, it is fairly trivial to assure that the
> mac address is set. That is what this driver does.
> 
> Signed-off-by: Jeremy Linton <lintonrjeremy@gmail.com>
> ---
>   Platform/RaspberryPi/Drivers/Genet/Genet.c   | 132 +++++++++++++++++++
>   Platform/RaspberryPi/Drivers/Genet/Genet.inf |  39 ++++++
>   2 files changed, 171 insertions(+)
>   create mode 100644 Platform/RaspberryPi/Drivers/Genet/Genet.c
>   create mode 100644 Platform/RaspberryPi/Drivers/Genet/Genet.inf
> 
> diff --git a/Platform/RaspberryPi/Drivers/Genet/Genet.c b/Platform/RaspberryPi/Drivers/Genet/Genet.c
> new file mode 100644
> index 0000000000..c4180f1d9d
> --- /dev/null
> +++ b/Platform/RaspberryPi/Drivers/Genet/Genet.c
> @@ -0,0 +1,132 @@
> +/** @file
> +
> +  Copyright (c) 2019, Jeremy Linton All rights reserved.<BR>
> +
> +  SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +  This driver acts like a stub to set the BCM
> +  Genet MAC address, until the actual network driver
> +  is in place. This should allow us to retrieve the
> +  mac address directly from the hardware in supported
> +  OS's rather than passing it via DSDT (which isn't
> +  ideal for a number of reasons, foremost the hardware
> +  should be self describing).
> +
> +**/
> +
> +#include <Library/ArmLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DevicePathLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiLib.h>
> +
> +#include <PiDxe.h>
> +#include <Protocol/RpiFirmware.h>
> +
> +#define GENET_BASE                 0xfd580000  // len = 0x10000
> +#define GENET_SYS_RBUF_FLUSH_CTRL  0x0008
> +#define GENET_UMAC_MAC0            0x080C
> +#define GENET_UMAC_MAC1            0x0810
> +
> +STATIC
> +VOID
> +RMWRegister (
> +  UINT32                Offset,
> +  UINT32                Mask,
> +  UINT32                In
> +  )
> +{
> +  EFI_PHYSICAL_ADDRESS  Addr = GENET_BASE;
> +  UINT32                Data = 0;
> +  UINT32                Shift;
> +
> +  Addr += Offset;
> +  Shift = 1;
> +  if (In) {
> +    while (!(Mask & Shift))
> +      Shift <<= 1;
> +    Data = (MmioRead32 (Addr) & ~Mask) | ((In * Shift) & Mask);
> +  } else {
> +    Data = MmioRead32 (Addr) & ~Mask;
> +  }
> +
> +  MmioWrite32 (Addr, Data);
> +
> +  ArmDataMemoryBarrier ();
> +}
> +
> +STATIC
> +VOID
> +WdRegister (
> +  UINT32                Offset,
> +  UINT32                In
> +  )
> +{
> +  EFI_PHYSICAL_ADDRESS  Base = GENET_BASE;
> +
> +  MmioWrite32 (Base + Offset, In);
> +
> +  ArmDataMemoryBarrier ();
> +}
> +
> +
> +
> +STATIC VOID
> +GenetMacInit (UINT8 *addr)
> +{
> +
> +  // bring the umac out of reset
> +  RMWRegister (GENET_SYS_RBUF_FLUSH_CTRL, 0x2, 1);
> +  gBS->Stall (10);
> +  RMWRegister (GENET_SYS_RBUF_FLUSH_CTRL, 0x2, 0);
> +
> +  // Update the MAC
> +
> +  WdRegister(GENET_UMAC_MAC0, (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]);
> +  WdRegister(GENET_UMAC_MAC1, (addr[4] << 8) | addr[5]);
> +}
> +
> +/**
> +  The entry point of Genet UEFI Driver.
> +
> +  @param  ImageHandle                The image handle of the UEFI Driver.
> +  @param  SystemTable                A pointer to the EFI System Table.
> +
> +  @retval  EFI_SUCCESS               The Driver or UEFI Driver exited normally.
> +  @retval  EFI_INCOMPATIBLE_VERSION  _gUefiDriverRevision is greater than
> +                                     SystemTable->Hdr.Revision.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +GenetEntryPoint (
> +  IN  EFI_HANDLE          ImageHandle,
> +  IN  EFI_SYSTEM_TABLE    *SystemTable
> +  )
> +{
> +  RASPBERRY_PI_FIRMWARE_PROTOCOL   *mFwProtocol;
> +  EFI_STATUS Status;
> +  UINT8 MacAddr[6];
> +
> +  DEBUG ((DEBUG_ERROR, "GENET:%a(): Init\n", __FUNCTION__));
> +
> +  Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
> +                  (VOID**)&mFwProtocol);
> +  if (EFI_ERROR(Status)) {
> +    DEBUG ((DEBUG_ERROR, "%a: failed to locate RPi firmware protocol\n", __FUNCTION__));
> +    return Status;
> +  }
> +
> +  // Get the MAC address from the firmware
> +  Status = mFwProtocol->GetMacAddress (MacAddr);
> +  if (EFI_ERROR (Status)) {
> +    DEBUG ((DEBUG_ERROR, "%a: failed to retrieve MAC address\n", __FUNCTION__));
> +    return Status;
> +  }
> +
> +  // Write it to the hardware
> +  GenetMacInit (MacAddr);
> +
> +  return EFI_SUCCESS;
> +}
> diff --git a/Platform/RaspberryPi/Drivers/Genet/Genet.inf b/Platform/RaspberryPi/Drivers/Genet/Genet.inf
> new file mode 100644
> index 0000000000..3599e5a6e5
> --- /dev/null
> +++ b/Platform/RaspberryPi/Drivers/Genet/Genet.inf
> @@ -0,0 +1,39 @@
> +## @file
> +#
> +# Copyright (c) 2020, Jeremy Linton All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> +  INF_VERSION                    = 0x0001001A
> +  BASE_NAME                      = Genet
> +  FILE_GUID                      = e2b1eaf3-50b7-4ae1-b79e-ec8020cb57ac
> +  MODULE_TYPE                    = UEFI_DRIVER
> +  VERSION_STRING                 = 0.1
> +  ENTRY_POINT                    = GenetEntryPoint
> +
> +[Sources]
> +  Genet.c
> +
> +[Packages]
> +  ArmPkg/ArmPkg.dec
> +  MdeModulePkg/MdeModulePkg.dec
> +  MdePkg/MdePkg.dec
> +  Platform/RaspberryPi/RaspberryPi.dec
> +
> +[LibraryClasses]
> +  BaseLib
> +  IoLib
> +  SynchronizationLib
> +  UefiDriverEntryPoint
> +  UefiLib
> +
> +[Protocols]
> +  gRaspberryPiFirmwareProtocolGuid              ## CONSUMES
> +
> +
> +[Depex]
> +  gRaspberryPiFirmwareProtocolGuid
> +
> 
> 
> 


  parent reply	other threads:[~2020-01-23 12:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-23 12:00 [edk2-platforms][PATCH 0/3] Platform/RPi4: Add Genet network driver stub Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 1/3] Silicon/Broadcom/Net: Add Genet stub driver to setup MAC Pete Batard
2020-01-23 13:44   ` Ard Biesheuvel
2020-01-23 14:36     ` Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 2/3] Platform/RPi: Add PlatformPcdLib to set the Genet MAC address Pete Batard
2020-01-23 13:50   ` Ard Biesheuvel
2020-01-23 15:01     ` Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 3/3] Platform/Rpi4: Enable Broadcom Genet stub driver Pete Batard
2020-01-23 12:00 ` [PATCH] Platform/RPi/Genet: Add Genet stub driver to setup MAC Pete Batard
2020-01-23 12:00 ` [PATCH] Platform/RPi4: Enable BCM GENET stub driver Pete Batard
     [not found] ` <15EC824B064B2D10.12514@groups.io>
2020-01-23 12:03   ` Pete Batard [this message]
     [not found] ` <15EC824ADEB49EC2.12514@groups.io>
2020-01-23 12:03   ` [edk2-devel] " Pete Batard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2695a134-d920-a2d3-d10e-380999dc0dfb@akeo.ie \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox