From: "Marvin Häuser" <mhaeuser@posteo.de>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: devel@edk2.groups.io, Pedro Falcato <pedro.falcato@gmail.com>
Subject: Re: [edk2-devel] [PATCH edk2-platforms 1/4] Ext4Pkg: Use depex for unicode collation protocols
Date: Fri, 17 Feb 2023 14:54:57 +0000 [thread overview]
Message-ID: <2DE5E6BC-4AAE-4E31-91E2-B47B2F93DA43@posteo.de> (raw)
In-Reply-To: <CAMj1kXGfnJyC8w8SjkAUfm_f1XUXRn5rW6pxLRC9-ExL1gTzhQ@mail.gmail.com>
> On 17. Feb 2023, at 15:29, Ard Biesheuvel <ardb@kernel.org> wrote:
>
> On Fri, 17 Feb 2023 at 15:05, Marvin Häuser <mhaeuser@posteo.de> wrote:
>>
>> Hi Ard,
>>
>> Thank you! Is "1/4" a mistake or did I miss the other 3? :)
>
> Oops.
>
> It was part of some RPi4 patches but I decided to send it out by itself.
>
>
>> Comments inline.
>>
>> On 17. Feb 2023, at 12:12, Ard Biesheuvel <ardb@kernel.org> wrote:
>>
>> The Unicode collation protocols, however, are different: loading the
>> driver will fail if neither of those are present. So they are not
>> TO_START protocols, and they need to be mentioned in the DEPEX so that
>> the DXE core will not dispatch the driver before the producers of the
>> prerequisite protocols have been dispatched. Also, mark them as
>> SOMETIMES_CONSUMES, as only one of the two is required.
>>
>>
>> Right. FatPkg solves this by probing for the protocol in Start() [1], which should guarantee that all entry points have been executed first, right? I'd prefer a universal and consistent solution to the issue and this looks fine, honestly.
>>
>> [1]
>> https://github.com/tianocore/edk2/blob/02fcfdce1e5ce86f1951191883e7e30de5aa08be/FatPkg/EnhancedFatDxe/Fat.c#L381
>> https://github.com/tianocore/edk2/blob/02fcfdce1e5ce86f1951191883e7e30de5aa08be/FatPkg/EnhancedFatDxe/Fat.inf#L19
>>
>
> I'd prefer using existing features for this, rather than open coding it.
It‘s not like we replicate a feature, we just move a function call to suit the control flow better. I‘d like a consistent solution and the FatPkg one looks fine to me.
>
>
>> - MODULE_TYPE = UEFI_DRIVER
>> + MODULE_TYPE = DXE_DRIVER
>>
>>
>> Is it not unidiomatic to use the UEFI Driver Binding model (UEFI) in a DXE driver (UEFI PI)?
>>
>
> Perhaps. But having a hard dependency on protocols beyond the default
> set defined for UEFI drivers is arguably even worse.
This is still very much a UEFI driver in a logical sense, this is just abusing the types to utilise DXE concepts. I‘m not opposed to such things in general, but here it looks unnecessary. It doesn’t help I’m not a big fan of the DXE dispatcher to begin with. :)
I agree the dependency is awkward, but I have to check the reason and alternatives later. In the end, it‘s Pedro‘s call anyway.
>
>
>> +[Depex]
>> + gEfiUnicodeCollationProtocolGuid OR gEfiUnicodeCollation2ProtocolGuid
>>
>>
>> Hmm, this will have the side effect that Ext4Dxe may load before (some of) the architectural protocols, right (modulo implicit dependencies via the UC protocols)? This would need some careful analysis, or we need to add all of the architectural protocols to preserve the old behaviour.
>>
>
> The ext4 driver does nothing except install protocols in its
> entrypoint, and everything else that happens is under the control of
> the UEFI driver model, afaict.
I guess. There also is a chance that libraries like DebugLib enable advanced features only as core services become available. But probably not a big deal.
Best regards,
Marvin
next prev parent reply other threads:[~2023-02-17 14:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 11:12 [PATCH edk2-platforms 1/4] Ext4Pkg: Use depex for unicode collation protocols Ard Biesheuvel
2023-02-17 14:05 ` Marvin Häuser
2023-02-17 14:29 ` [edk2-devel] " Ard Biesheuvel
2023-02-17 14:54 ` Marvin Häuser [this message]
2023-02-17 15:17 ` Ard Biesheuvel
2023-02-17 15:38 ` Marvin Häuser
2023-02-17 17:31 ` Pedro Falcato
2023-02-17 18:01 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2DE5E6BC-4AAE-4E31-91E2-B47B2F93DA43@posteo.de \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox