public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Ni, Ruiyu" <ruiyu.ni@Intel.com>
To: Hao Wu <hao.a.wu@intel.com>, edk2-devel@lists.01.org
Cc: Eric Dong <eric.dong@intel.com>, Jiewen Yao <jiewen.yao@intel.com>
Subject: Re: [PATCH v2 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME host controller PPI
Date: Fri, 22 Jun 2018 12:44:22 +0800	[thread overview]
Message-ID: <31c35545-336b-24ea-d927-067a40bc3900@Intel.com> (raw)
In-Reply-To: <20180622023859.13880-2-hao.a.wu@intel.com>

On 6/22/2018 10:38 AM, Hao Wu wrote:
> Introduces the below PPI:
> 
> struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
>    EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR       GetNvmeHcMmioBar;
>    EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH    GetNvmeHcDevicePath;
> };
> 
> The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
> address of each NVMe HC within the system;
> 
> The GetNvmeHcDevicePath service will provide the caller with the device
> path information of each NVMe HC.
> 
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Hao Wu <hao.a.wu@intel.com>
> Reviewed-by: Star Zeng <star.zeng@intel.com>
> ---
>   MdeModulePkg/Include/Ppi/NvmExpressHostController.h | 92 ++++++++++++++++++++
>   MdeModulePkg/MdeModulePkg.dec                       |  3 +
>   2 files changed, 95 insertions(+)
> 
> diff --git a/MdeModulePkg/Include/Ppi/NvmExpressHostController.h b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> new file mode 100644
> index 0000000000..3e22f5057b
> --- /dev/null
> +++ b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> @@ -0,0 +1,92 @@
> +/** @file
> +
> +  Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +  This program and the accompanying materials
> +  are licensed and made available under the terms and conditions of the BSD License
> +  which accompanies this distribution.  The full text of the license may be found at
> +  http://opensource.org/licenses/bsd-license.php
> +
> +  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#ifndef _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> +#define _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> +
> +#include <Protocol/DevicePath.h>
> +
> +///
> +/// Global ID for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> +///
> +#define EDKII_NVME_EXPRESS_HOST_CONTROLLER_PPI_GUID \
> +  { \
> +    0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } \
> +  }
> +
> +//
> +// Forward declaration for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> +//
> +typedef struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI  EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI;
> +
> +/**
> +  Get the MMIO base address of NVM Express host controller.
> +
> +  @param[in]  This                 The PPI instance pointer.
> +  @param[in]  ControllerId         The ID of the NVM Express host controller.
> +  @param[out] MmioBar              The MMIO base address of the controller.
> +
> +  @retval EFI_SUCCESS              The operation succeeds.
> +  @retval EFI_INVALID_PARAMETER    The parameters are invalid.
> +  @retval EFI_NOT_FOUND            The specified NVM Express host controller not
> +                                   found.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR) (
> +  IN  EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI    *This,
> +  IN  UINT8                                    ControllerId,
> +  OUT UINTN                                    *MmioBar
> +  );
> +
> +/**
> +  Get the device path of NVM Express host controller.
> +
> +  @param[in]  This                 The PPI instance pointer.
> +  @param[in]  ControllerId         The ID of the NVM Express host controller.
> +  @param[out] DevicePathLength     The length of the device path in bytes specified
> +                                   by DevicePath.
> +  @param[out] DevicePath           The device path of NVM Express host controller.
> +                                   This field re-uses EFI Device Path Protocol as
> +                                   defined by Section 10.2 EFI Device Path Protocol
> +                                   of UEFI 2.7 Specification.
> +
> +  @retval EFI_SUCCESS              The operation succeeds.
> +  @retval EFI_INVALID_PARAMETER    The parameters are invalid.
> +  @retval EFI_NOT_FOUND            The specified NVM Express host controller not
> +                                   found.
> +  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of resources.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH) (
> +  IN  EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI    *This,
> +  IN  UINT8                                    ControllerId,
> +  OUT UINTN                                    *DevicePathLength,
> +  OUT EFI_DEVICE_PATH_PROTOCOL                 **DevicePath
> +  );
> +
> +//
> +// This PPI contains a set of services to interact with the NVM Express host
> +// controller.
> +//
> +struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
> +  EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR       GetNvmeHcMmioBar;
> +  EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH    GetNvmeHcDevicePath;
> +};
> +
> +extern EFI_GUID gEdkiiPeiNvmExpressHostControllerPpiGuid;
> +
> +#endif
> diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
> index cc397185f7..eeabd62418 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -464,6 +464,9 @@
>     ## Include/Ppi/PlatformSpecificResetHandler.h
>     gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
>   
> +  ## Include/Ppi/NvmExpressHostController.h
> +  gEdkiiPeiNvmExpressHostControllerPpiGuid  = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
> +
>   [Protocols]
>     ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
>     #  Include/Protocol/LoadPe32Image.h
> 
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

-- 
Thanks,
Ray


  reply	other threads:[~2018-06-22  4:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-22  2:38 [PATCH v2 0/4] Add PEI BlockIo support for NVM Express devices Hao Wu
2018-06-22  2:38 ` [PATCH v2 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME host controller PPI Hao Wu
2018-06-22  4:44   ` Ni, Ruiyu [this message]
2018-06-22  2:38 ` [PATCH v2 2/4] MdeModulePkg/NvmExpressPei: Add the NVME device PEI BlockIo support Hao Wu
2018-06-22  4:44   ` Ni, Ruiyu
2018-06-25  0:56   ` Zeng, Star
2018-06-22  2:38 ` [PATCH v2 3/4] MdeModulePkg: Add GUID for recovery capsule on NVM Express devices Hao Wu
2018-06-22  2:38 ` [PATCH v2 4/4] FatPkg/FatPei: Add the recognition of recovery capsule on NVME device Hao Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=31c35545-336b-24ea-d927-067a40bc3900@Intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox