public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Rebecca Cran" <rebecca@bsdio.com>
To: devel@edk2.groups.io, gaoliming <gaoliming@byosoft.com.cn>,
	"Andrew Fish" <afish@apple.com>,
	"Leif Lindholm" <quic_llindhol@quicinc.com>,
	"Kinney, Michael D" <michael.d.kinney@intel.com>,
	"'Bob Feng'" <bob.c.feng@intel.com>,
	"'Yuwei Chen'" <yuwei.chen@intel.com>
Subject: Re: [edk2-devel] 回复: [PATCH v3 0/4] edksetup.bat, BaseTools: Improve Windows environment setup and BaseTools C compilation
Date: Sun, 07 May 2023 19:49:18 -0600	[thread overview]
Message-ID: <33f98f94-a7a0-4f76-8667-18e854357ee5@app.fastmail.com> (raw)
In-Reply-To: <00a701d9814e$7e155620$7a400260$@byosoft.com.cn>

Oh that’s a good point. I also noticed that on Windows we don’t run the python test in BaseTools/Tests/RunTests.py.

I’ll get the current patches merged and work on adding the python version check on Linux and the python functionally tests on Windows.

On Sun, May 7, 2023, at 7:43 PM, gaoliming via groups.io wrote:
> Rebecca:
>   I see this patch. It removes python2. But, it doesn't add python 
> version check. Will you add this check in edksetup.sh?
>
> Thanks
> Liming
>> -----邮件原件-----
>> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Rebecca Cran
>> 发送时间: 2023年5月8日 9:32
>> 收件人: devel@edk2.groups.io; gaoliming <gaoliming@byosoft.com.cn>;
>> Andrew Fish <afish@apple.com>; Leif Lindholm <quic_llindhol@quicinc.com>;
>> Kinney, Michael D <michael.d.kinney@intel.com>; 'Bob Feng'
>> <bob.c.feng@intel.com>; 'Yuwei Chen' <yuwei.chen@intel.com>
>> 主题: Re: [edk2-devel] 回复: [PATCH v3 0/4] edksetup.bat, BaseTools:
>> Improve Windows environment setup and BaseTools C compilation
>> 
>> I’ve removed the python 2 checks from edksetup.sh in the patch “Remove
>> bashisms from edksetup.sh and BaseTools/BuildEnv” that I sent out a few
>> days ago.
>> 
>> Rebecca
>> 
>> On Sun, May 7, 2023, at 7:30 PM, gaoliming via groups.io wrote:
>> > Rebecca:
>> >   This change is good to me. Reviewed-by: Liming Gao
>> <gaoliming@byosoft.com.
>> > cn>
>> >
>> >   But, I see edksetup.sh also has python2 check. I think the same clean up
>> > can be done in edksetup.sh.
>> >
>> > Thanks
>> > Liming
>> >> -----邮件原件-----
>> >> 发件人: Rebecca Cran <rebecca@bsdio.com>
>> >> 发送时间: 2023年5月7日 3:31
>> >> 收件人: devel@edk2.groups.io; Andrew Fish <afish@apple.com>; Leif
>> >> Lindholm <quic_llindhol@quicinc.com>; Michael D Kinney
>> >> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
>> >> Bob Feng <bob.c.feng@intel.com>; Yuwei Chen <yuwei.chen@intel.com>
>> >> 抄送: Rebecca Cran <rebecca@bsdio.com>
>> >> 主题: [PATCH v3 0/4] edksetup.bat, BaseTools: Improve Windows
>> >> environment setup and BaseTools C compilation
>> >>
>> >> There are remnants of Python 2 support in BaseTools/toolsetup.bat that
>> > it's
>> >> probably time to remove since we only support Python 3.6 and newer
>> these
>> >> days.
>> >> So, remove the variables that enable Python3 support and simplify the
>> > batch
>> >> script. I've also seen errors where after running edksetup.bat the build
>> >> command isn't available because PYTHONPATH wasn't being set, so fix that
>> >> when the Pip BaseTools are being used.
>> >>
>> >> At the same time, let's add a check that we meet the minimum version
>> >> requirement so we don't end up failing with an obscure error.
>> >>
>> >> Building BaseTools causes a warning about threading.currentThread being
>> >> deprecated, so update code in NmakeSubdirs.py to switch to
>> >> threading.current_thread.
>> >>
>> >> There needs to be further work, because if PYTHON_COMMAND isn't
>> >> specified then
>> >> it defaults to "py -3", where py is C:\Windows\py.exe, which doesn't work
>> > if
>> >> you're using a virtualenv since it installs python.exe and pythonw.exe in
>> >> venv\Scripts. toolsetup.bat therefore fails to detect the Pip BaseTools
>> > and
>> >> uses the in-source Basetools.
>> >>
>> >> GitHub PR: https://github.com/tianocore/edk2/pull/4302
>> >> GitHub branch: https://github.com/bcran/edk2/tree/py3
>> >>
>> >> Changes between v1 and v2
>> >> =========================
>> >>
>> >> - Require Python 3.6 or newer: 3.6 was when PEP 526 was added, which
>> we
>> >> use.
>> >> - Fix Tests/RunTests.py on Windows.
>> >>
>> >> Rebecca Cran (4):
>> >>   BaseTools: Remove Python2/Python3 detection from toolset.bat
>> >>   BaseTools: use threading.current_thread in NmakeSubdirs.py
>> >>   edksetup.bat: if toolsetup.bat fails, just exit
>> >>   BaseTools: Update toolsetup.bat and Tests/PythonTest.py to check ver
>> >>
>> >>  BaseTools/Source/C/Makefiles/NmakeSubdirs.py |   2 +-
>> >>  BaseTools/Tests/PythonTest.py                |  22 +++-
>> >>  BaseTools/toolsetup.bat                      | 119
>> >> ++++++++------------
>> >>  edksetup.bat                                 |   1 +
>> >>  4 files changed, 69 insertions(+), 75 deletions(-)
>> >>
>> >> --
>> >> 2.40.0.windows.1
>> >
>> >
>> >
>> >
>> >
>> >
>> 
>> 
>> 
>> 
>
>
>
>
>
> 

      reply	other threads:[~2023-05-08  1:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-06 19:30 [PATCH v3 0/4] edksetup.bat, BaseTools: Improve Windows environment setup and BaseTools C compilation Rebecca Cran
2023-05-06 19:30 ` [PATCH v3 1/4] BaseTools: Remove Python2/Python3 detection from toolset.bat Rebecca Cran
2023-05-06 19:30 ` [PATCH v3 2/4] BaseTools: use threading.current_thread in NmakeSubdirs.py Rebecca Cran
2023-05-06 19:30 ` [PATCH v3 3/4] edksetup.bat: if toolsetup.bat fails, just exit Rebecca Cran
2023-05-06 19:30 ` [PATCH v3 4/4] BaseTools: Update toolsetup.bat and Tests/PythonTest.py to check ver Rebecca Cran
2023-05-08  1:30 ` 回复: [PATCH v3 0/4] edksetup.bat, BaseTools: Improve Windows environment setup and BaseTools C compilation gaoliming
2023-05-08  1:32   ` [edk2-devel] " Rebecca Cran
2023-05-08  1:43     ` 回复: " gaoliming
2023-05-08  1:49       ` Rebecca Cran [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=33f98f94-a7a0-4f76-8667-18e854357ee5@app.fastmail.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox