From: "Joe L" <jlotwo@gmail.com>
To: devel@edk2.groups.io
Cc: joelopez333 <jlotwo@gmail.com>
Subject: [edk2-devel] [PATCH v2] MdeModulePkg/PciHostBridgeDxe: Add readback after final Cfg-Write
Date: Mon, 6 Nov 2023 18:02:21 -0800 [thread overview]
Message-ID: <34167f0f873c01654aee0e9c8629221dad241529.1699322498.git.jlotwo@gmail.com> (raw)
From: joelopez333 <jlotwo@gmail.com>
REF:https://edk2.groups.io/g/devel/topic/102310377#110456
Problem Report:
On AARCH64, there is no ordering guarantee between configuration
space (ECAM) writes and memory space reads (MMIO). ARM AMBA CHI
only guarantees ordering for reads and writes within a single address region,
however, on some systems MMIO and ECAM may be split into separate
address regions.
A problem may arise when an ECAM write is issued a completion before a subsequent
MMIO read is issued and receives a completion.
For example, a typical PCI software flow is the following:
1. ECAM write to device command register to enable memory space
2. MMIO read from device memory space for which access was enabled
in step 1.
There is no guarantee that step 2. will not begin before the completion of step 1.
on systems where ECAM/MMIO are specified as separate address regions, even
if both spaces have the memory attributes device-nGnRnE.
Fix:
- Add a read after the final PCI Configuration space write
in RootBridgeIoPciAccess.
- When configuration space is strongly ordered, this ensures
that program execution cannot continue until the completion
is received for the previous Cfg-Write, which may have side-effects.
- Risk of reading a "write-only" register and causing a CA which leaves the device
unresponsive. The expectation based on the PCI Base Spec v6.1 section 7.4 is that
all PCI Spec-defined registers will be readable, however, there may exist
design-specific registers that fall into this category.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Joe Lopez <jlotwo2@gmail.com>
---
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
index 157a0ada80..c2dc2018d6 100644
--- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
+++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
@@ -1238,6 +1238,14 @@ RootBridgeIoPciAccess (
}
}
+ //
+ // Perform readback after write to confirm completion was received for the last write
+ // before subsequent memory operations can be issued.
+ //
+ if (!Read) {
+ PciSegmentRead8 (Address - InStride);
+ }
+
return EFI_SUCCESS;
}
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110782): https://edk2.groups.io/g/devel/message/110782
Mute This Topic: https://groups.io/mt/102435564/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next reply other threads:[~2023-11-07 2:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-07 2:02 Joe L [this message]
2023-11-07 18:54 ` [edk2-devel] [PATCH v2] MdeModulePkg/PciHostBridgeDxe: Add readback after final Cfg-Write Joe L
2023-11-07 18:58 ` Joe L
2023-11-08 1:06 ` Michael D Kinney
2023-11-13 11:37 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=34167f0f873c01654aee0e9c8629221dad241529.1699322498.git.jlotwo@gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox