答复: [edk2-devel] [PATCH edk2 v1 1/1] MdeModulePkg/Variable: Move FindVariable after AutoUpdateLangVariable

["Ming Huang" <huangming23@huawei.com>]

Hi GuoMin,

I don't think the new change can fix this issue(id=2667). We use older edk2 version which don't have 
SynchronizeRuntimeVariableCache().

Thanks
Ming

-----邮件原件-----
发件人: Jiang, Guomin [mailto:guomin.jiang@intel.com] 
发送时间: 2020年7月22日 8:47
收件人: Huangming (Mark) <huangming23@huawei.com>; devel@edk2.groups.io; Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>
抄送: Lidongzhan <lidongzhan@huawei.com>; Songdongkuang <songdongkuang@huawei.com>; wanghuiqiang <wanghuiqiang@huawei.com>; qiuliangen <qiuliangen@huawei.com>; Shenlimei <shenlimei@huawei.com>; xiewenyi (A) <xiewenyi2@huawei.com>; John Garry <john.garry@huawei.com>
主题: RE: [edk2-devel] [PATCH edk2 v1 1/1] MdeModulePkg/Variable: Move FindVariable after AutoUpdateLangVariable

Hi Ming,

The new posted change https://edk2.groups.io/g/devel/topic/75412007#62327 may be helpful for this issue.

Can you add the change in your code and verify it?

Thanks
Guomin
> -----Original Message-----
> From: Ming Huang <huangming23@huawei.com>
> Sent: Friday, July 3, 2020 8:49 PM
> To: Jiang, Guomin <guomin.jiang@intel.com>; devel@edk2.groups.io; 
> Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; 
> Gao, Liming <liming.gao@intel.com>
> Cc: lidongzhan@huawei.com; songdongkuang@huawei.com; 
> wanghuiqiang@huawei.com; qiuliangen@huawei.com; shenlimei@huawei.com; 
> xiewenyi2@huawei.com; john.garry@huawei.com
> Subject: Re: [edk2-devel] [PATCH edk2 v1 1/1] MdeModulePkg/Variable:
> Move FindVariable after AutoUpdateLangVariable
> 
> 
> 
> 在 2020/7/1 8:22, Jiang, Guomin 写道:
> > So I think the key point is why AutoUpdateLangVariable() return 
> > success
> rather than fail, if is it reasonable for this case or we need other 
> error handing?
> 
> I don't think AutoUpdateLangVariable() should return fail while occur 
> reclaim internal in AutoUpdateLangVariable () function. The problem is 
> the
> Variable(VARIABLE_POINTER_TRACK) get by FindVariable is invald in this 
> situation and this Variable will be pass to UpdateVariable().
> 
>   if (mVariableModuleGlobal->VariableGlobal.AuthSupport) {
>     Status = AuthVariableLibProcessVariable (VariableName, VendorGuid, 
> Data, DataSize, Attributes);
>   } else {
> // This Variable is invald while occur reclaim internal in 
> AutoUpdateLangVariable ()
>     Status = UpdateVariable (VariableName, VendorGuid, Data, DataSize, 
> Attributes, 0, 0, &Variable, NULL);
>   }
> 
> >
> > I am glad to help you but I can't reproduce it until now, can you 
> > provide a
> step to reproduce it in simulation platform.
> 
> I am not familiar with simulation platform. We reproduct this issue in 
> our board once.
> For accelerating reproduction this issue, Add Reclaim() to
> AutoUpdateLangVariable() for test.
> 
> Thanks,
> Ming
> 
> >
> > If it is urgent, I suggest that discuss with your internal team 
> > first and explain
> that we need consider the risk check it into edk2.
> >
> > Best Regards
> > Guomin
> >
> >> -----Original Message-----
> >> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Ming 
> >> Huang via groups.io
> >> Sent: Tuesday, June 30, 2020 8:26 PM
> >> To: Jiang, Guomin <guomin.jiang@intel.com>; devel@edk2.groups.io; 
> >> Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A 
> >> <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>
> >> Cc: lidongzhan@huawei.com; songdongkuang@huawei.com; 
> >> wanghuiqiang@huawei.com; qiuliangen@huawei.com;
> shenlimei@huawei.com;
> >> xiewenyi2@huawei.com
> >> Subject: Re: [edk2-devel] [PATCH edk2 v1 1/1] MdeModulePkg/Variable:
> >> Move FindVariable after AutoUpdateLangVariable
> >>
> >>
> >>
> >> 在 2020/6/30 8:58, Jiang, Guomin 写道:
> >>> Hi Huang,
> >>>
> >>> >From issue statement, I guess that
> >>> 1. AutoUpdateLangVariable() invoked, and it will invoke
> >>> FindVariable() first, at the same time, reclaim occur and 
> >>> Variable.CurrPtr is invalid, it return
> >> with success 2. UpdateVariable() is invoked when The old Lang's 
> >> State is valid and the new Lang's State is also valid.
> >>> 3. In the situation, FindVariable() checked Lang's State and only 
> >>> enable one
> >> Lang's State. But it didn't in fact.
> >>> 4. BmForEachVariable() deadloop in the situation.
> >>>
> >>> Am I right?
> >>
> >> Yes, right.
> >>
> >> Thanks,
> >> Ming
> >>
> >>>
> >>>> -----Original Message-----
> >>>> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Ming
> >>>> Huang via groups.io
> >>>> Sent: Monday, June 29, 2020 2:06 PM
> >>>> To: devel@edk2.groups.io; Wang, Jian J <jian.j.wang@intel.com>; 
> >>>> Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming 
> >>>> <liming.gao@intel.com>
> >>>> Cc: lidongzhan@huawei.com; huangming23@huawei.com; 
> >>>> songdongkuang@huawei.com; wanghuiqiang@huawei.com; 
> >>>> qiuliangen@huawei.com; shenlimei@huawei.com;
> >> xiewenyi2@huawei.com
> >>>> Subject: [edk2-devel] [PATCH edk2 v1 1/1] MdeModulePkg/Variable:
> >> Move
> >>>> FindVariable after AutoUpdateLangVariable
> >>>>
> >>>> When occur reclaim in AutoUpdateLangVariable(), the CurrPtr of 
> >>>> Variable is invalid. The State will be update with wrong position 
> >>>> after UpdateVariable in this situation and two valid PlatformLang 
> >>>> or Lang
> >> variables will exist.
> >>>> BmForEachVariable() will enter endless loop while exist two valid 
> >>>> PlatformLang variables. So FindVariable() should be invoked atfer 
> >>>> AutoUpdateLangVariable().
> >>>>
> >>>> https://bugzilla.tianocore.org/show_bug.cgi?id=2667
> >>>>
> >>>> Signed-off-by: Ming Huang <huangming23@huawei.com>
> >>>> ---
> >>>>  MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c | 26
> >>>> ++++++++++----------
> >>>>  1 file changed, 13 insertions(+), 13 deletions(-)
> >>>>
> >>>> diff --git 
> >>>> a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
> >>>> b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
> >>>> index 1e71fc6..0cec981 100644
> >>>> --- a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
> >>>> +++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
> >>>> @@ -2741,6 +2741,19 @@ VariableServiceSetVariable (
> >>>>      mVariableModuleGlobal->NonVolatileLastVariableOffset = 
> >>>> (UINTN) NextVariable - (UINTN) Point;
> >>>>    }
> >>>>
> >>>> +  if (!FeaturePcdGet (PcdUefiVariableDefaultLangDeprecate)) {
> >>>> +    //
> >>>> +    // Hook the operation of setting 
> >>>> + PlatformLangCodes/PlatformLang and
> >>>> LangCodes/Lang.
> >>>> +    //
> >>>> +    Status = AutoUpdateLangVariable (VariableName, Data, DataSize);
> >>>> +    if (EFI_ERROR (Status)) {
> >>>> +      //
> >>>> +      // The auto update operation failed, directly return to 
> >>>> + avoid
> >>>> inconsistency between PlatformLang and Lang.
> >>>> +      //
> >>>> +      goto Done;
> >>>> +    }
> >>>> +  }
> >>>> +
> >>>>    //
> >>>>    // Check whether the input variable is already existed.
> >>>>    //
> >>>> @@ -2763,19 +2776,6 @@ VariableServiceSetVariable (
> >>>>      }
> >>>>    }
> >>>>
> >>>> -  if (!FeaturePcdGet (PcdUefiVariableDefaultLangDeprecate)) {
> >>>> -    //
> >>>> -    // Hook the operation of setting PlatformLangCodes/PlatformLang
> and
> >>>> LangCodes/Lang.
> >>>> -    //
> >>>> -    Status = AutoUpdateLangVariable (VariableName, Data, DataSize);
> >>>> -    if (EFI_ERROR (Status)) {
> >>>> -      //
> >>>> -      // The auto update operation failed, directly return to avoid
> >> inconsistency
> >>>> between PlatformLang and Lang.
> >>>> -      //
> >>>> -      goto Done;
> >>>> -    }
> >>>> -  }
> >>>> -
> >>>>    if (mVariableModuleGlobal->VariableGlobal.AuthSupport) {
> >>>>      Status = AuthVariableLibProcessVariable (VariableName, 
> >>>> VendorGuid, Data, DataSize, Attributes);
> >>>>    } else {
> >>>> --
> >>>> 2.8.1
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> >>
> >> 
> >
> >
> > .
> >