From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=17.151.62.66; helo=nwk-aaemail-lapp01.apple.com; envelope-from=afish@apple.com; receiver=edk2-devel@lists.01.org Received: from nwk-aaemail-lapp01.apple.com (nwk-aaemail-lapp01.apple.com [17.151.62.66]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id E20D1211D59AA for ; Wed, 6 Mar 2019 09:04:39 -0800 (PST) Received: from pps.filterd (nwk-aaemail-lapp01.apple.com [127.0.0.1]) by nwk-aaemail-lapp01.apple.com (8.16.0.27/8.16.0.27) with SMTP id x26GvFqr035503; Wed, 6 Mar 2019 09:04:36 -0800 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=apple.com; h=mime-version : content-type : sender : from : message-id : subject : date : in-reply-to : cc : to : references; s=20180706; bh=S1uB5gcCxrW+0aJ6tss8ijD+2LC5Y2006Eq23QXl9gg=; b=M+jcKe5IkS6ZLDu2IryREcLa8tgh98mEDOCBR9w1INTy0fotrqQzsDtxOoY/NSJTFIPU A+arOxMM83kduhp16BkcLVpLsIP/FKliGozLdXTjv1G4Yma90DAHKiZPRHbXdldu4uRs 8g0/nlB7YMzxALzhb6Bjdv3pS1h23YEHoOT6DFcII2d449CgVG0JIGvJrnmidQcWH/Pv I1pVed1jZdMruomFoZGqe48lQYOWUXsjP1ZGkjEg5E7/JZkfMI7nKpuPbxvLbRU/qyLF 0hLI2vopbK2R33/KwsPP29itvJDYzo0JDNKzUe2dkH1MhQxFDC6+7Y5aSN28piGMfCHo CQ== Received: from mr2-mtap-s03.rno.apple.com (mr2-mtap-s03.rno.apple.com [17.179.226.135]) by nwk-aaemail-lapp01.apple.com with ESMTP id 2qysn8n45e-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO); Wed, 06 Mar 2019 09:04:36 -0800 MIME-version: 1.0 Received: from ma1-mmpp-sz10.apple.com (ma1-mmpp-sz10.apple.com [17.171.128.150]) by mr2-mtap-s03.rno.apple.com (Oracle Communications Messaging Server 8.0.2.3.20181024 64bit (built Oct 24 2018)) with ESMTPS id <0PNY0019JFFNQOF0@mr2-mtap-s03.rno.apple.com>; Wed, 06 Mar 2019 09:04:35 -0800 (PST) Received: from process_milters-daemon.ma1-mmpp-sz10.apple.com by ma1-mmpp-sz10.apple.com (Oracle Communications Messaging Server 8.0.2.3.20181024 64bit (built Oct 24 2018)) id <0PNY00D00F6V3A00@ma1-mmpp-sz10.apple.com>; Wed, 06 Mar 2019 09:04:35 -0800 (PST) X-Va-A: X-Va-T-CD: 9b3859669d90162ac484de95f7f3dbd2 X-Va-E-CD: 95738d08b182ffdfff38cc18dbd030b6 X-Va-R-CD: 087c0cfe3081843155c0c8a4a67982ff X-Va-CD: 0 X-Va-ID: ff1c8071-910f-4290-86e3-44aaf812fece X-V-A: X-V-T-CD: 9b3859669d90162ac484de95f7f3dbd2 X-V-E-CD: 95738d08b182ffdfff38cc18dbd030b6 X-V-R-CD: 087c0cfe3081843155c0c8a4a67982ff X-V-CD: 0 X-V-ID: 9e1afed8-fa97-4dc5-a877-6c34261910b2 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2019-03-06_11:,, signatures=0 Received: from [17.234.230.246] (unknown [17.234.230.246]) by ma1-mmpp-sz10.apple.com (Oracle Communications Messaging Server 8.0.2.3.20181024 64bit (built Oct 24 2018)) with ESMTPSA id <0PNY00DOWFFK9I10@ma1-mmpp-sz10.apple.com>; Wed, 06 Mar 2019 09:04:35 -0800 (PST) Sender: afish@apple.com From: Andrew Fish Message-id: <3BE06BA7-9AEE-4330-BD4D-BBA96EB04D93@apple.com> Date: Wed, 06 Mar 2019 09:04:29 -0800 In-reply-to: Cc: Achin Gupta , "edk2-devel@lists.01.org" , Charles Garcia-Tobin To: Ard Biesheuvel References: <734D49CCEBEEF84792F5B80ED585239D5C060382@SHSMSX104.ccr.corp.intel.com> <734D49CCEBEEF84792F5B80ED585239D5C060A85@SHSMSX104.ccr.corp.intel.com> <20190306124125.GJ21602@mac-ubuntu-vm> X-Mailer: Apple Mail (2.3445.6.18) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:, , definitions=2019-03-06_11:, , signatures=0 X-Content-Filtered-By: Mailman/MimeDel 2.1.29 Subject: Re: Does ARM platform produce MP protocol? X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Mar 2019 17:04:40 -0000 Content-Type: text/plain; CHARSET=US-ASCII Content-Transfer-Encoding: 7BIT > On Mar 6, 2019, at 5:22 AM, Ard Biesheuvel wrote: > > On Wed, 6 Mar 2019 at 13:41, Achin Gupta > wrote: >> >> On Wed, Mar 06, 2019 at 10:37:58AM +0100, Ard Biesheuvel wrote: >>> (adding Achin and Charles) >>> >>> On Wed, 6 Mar 2019 at 10:16, Ni, Ray wrote: >>>> >>>>> -----Original Message----- >>>>> From: edk2-devel On Behalf Of Ard >>>>> Biesheuvel >>>>> Sent: Wednesday, March 6, 2019 3:38 PM >>>>> To: Ni, Ray >>>>> Cc: edk2-devel@lists.01.org >>>>> Subject: Re: [edk2] Does ARM platform produce MP protocol? >>>>> >>>>> On Wed, 6 Mar 2019 at 06:44, Ni, Ray wrote: >>>>>> >>>>>> Ard, Leif, >>>>>> I am a bit interested in how ARM platform supports the MP? >>>>>> PI Spec defines below protocol but I failed to find a driver in ARM platform >>>>> producing this protocol. >>>>>> Or did I miss anything? >>>>>> >>>>> >>>>> No you are right. We don't expose that on ARM, since UEFI only runs on a >>>>> single core. Bringing up and taking down cores is done via a protocol called >>>>> PSCI, which is implemented by firmware running at a higher privilege level. >>>>> >>>>> So while it would be possible to implement the MP protocol on top of PSCI, >>>>> we haven't identified a use case for it yet. (The OS calls PSCI directly to boot >>>>> the secondary cores) >> >> IIUC, the MP protocol enables communication between processors that are already >> up instead of bringing them up or taking them down. So, it is orthogonal to >> PSCI. Is that what you meant? >> > > Surely, StartupThisAP starts up the AP, no? > > In any case, I didn't dig any deeper, but I know that PSCI can be used > (even in the UEFI context) to execute pieces of code on another core > (ACS uses this IIRC) Ard, I take it that the PSCI is replacing the INIT SIPI SIPI mechanism on x86. For PI you need to setup the APs (BSP is running EFI) and the MP protocol gets used for this on boot. Things like setting up SMM, syncing page tables, and MTRR registers. Seems like PSCI kind of replaces this usage on ARM. Since the APs don't run EFI, and it is not safe to call EFI APIs on APIs the usage for running code on the APs is limited. What I've seen is mostly utilities and diagnostics. For example you can write a utility to dump out the MTRR and MSR registers that are per CPU. From a diagnostic point of view it is easier to generate more memory and cache traffic if you have code running on the APs. Note: BSP and AP are terms from the original MP Spec on x86. BSP == Boot Strap Processor (so runs EFI) and AP == Application Processor (all the CPUs not running EFI). Note: The INIT SIPI SIPI is painful to code since the SIPI sends a real mode address for code to run so it involves a lot of complex mode transitions so this is why it makes sense to centralize that code for x86. Thanks, Andrew Fish > >>>> >>>> Is below EFI_MM_MP_PROTOCOL (added in PI spec 1.6) implemented in ARM? >>>> Or will it be implemented by an ARM module? >>> >>> No it is currently not implemented, and I am not aware of any plans to do so. >> >> +1. There is no need to do this until UEFI runs on a single core on Arm. >> > > until -> as long as ?? > >>> >>>> I am asking this because MP_SERVICES protocol exposes CPU location information >>>> (Package/Core/Thread) through *GetProcessorInfo*, but MM_MP protocol doesn't >>>> have a way to expose that information. >>>> If such location information isn't exposed by MM_MP, is that because ARM doesn't >>>> care about the location information? Or because ARM cares but forgot to add similar >>>> *GetProcessorInfo* interface to MM_MP when changing the PI spec? >>>> Or ARM doesn't use the MM_MP at all? >> >> Even if Arm used this protocol, it can work with the logical processor number. I >> don't see a need to expose the location information to the caller. It seems very >> Intel specific. Is the EFI_MP_SERVICES_PROTOCOL used on Arm? >> > > No, that is what started the discussion. > >>>> >>> >>> I don't know the history of this protocol and who proposed it, but >>> today, we don't have a need for running per-CPU initialization code in >>> the context of MM. Even if MM is a component of the more privileged >>> firmware running on an ARM system, it is running in a sandbox that was >>> primarily designed around exposing MM services to UEFI code running at >>> the same privilege level as the OS (such as the authenticated variable >>> store). Platform initialization code (which is more likely to require >>> dispatch to each core) runs in the secure world as well, but not in >>> the context of MM. >>> >>> I will let Achin chime in here as well. >> >> +1. >> >> I will let Charles comment on the history. Maybe this protocol was designed >> for Arm systems where MM is the most privileged firmware. The upstream >> implementation runs MM in the lowest privilege level. Either way, this protocol >> sense only when MM on Arm is MP capable. >> >> cheers, >> Achin >> >> >>> >>> >>>> typedef struct _EFI_MM_MP_PROTOCOL { >>>> UINT32 Revision, >>>> UINT32 Attributes, >>>> EFI_MM_ GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors, >>>> EFI_MM_DISPATCH_PROCEDURE DispatchProcedure, >>>> EFI_MM_BROADCAST_PROCEDURE BroadcastProcedure, >>>> EFI_MM_SET_STARTUP_PROCEDURE SetStartupProcedure, >>>> EFI_CHECK_FOR_PROCEDURE CheckOnProcedure, >>>> EFI_WAIT_FOR_PROCEDURE WaitForProcedure, >>>> }EFI_MM_MP_PROTOCOL; >>>>> >>>>>> typedef struct _EFI_MP_SERVICES_PROTOCOL { >>>>>> EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS >>>>> GetNumberOfProcessors; >>>>>> EFI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo; >>>>>> EFI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs; >>>>>> EFI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP; >>>>>> EFI_MP_SERVICES_SWITCH_BSP SwitchBSP; >>>>> EFI_MP_SERVICES_ENABLEDISABLEAP >>>>>> EnableDisableAP; EFI_MP_SERVICES_WHOAMI WhoAmI; } >>>>>> EFI_MP_SERVICES_PROTOCOL; >>>>>> >>>>>> Thanks, >>>>>> Ray >>>>> _______________________________________________ >>>>> edk2-devel mailing list >>>>> edk2-devel@lists.01.org >>>>> https://lists.01.org/mailman/listinfo/edk2-devel >> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel