public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Chiu, Chasel" <chasel.chiu@intel.com>
To: "Sinha, Ankit" <ankit.sinha@intel.com>,
	"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Kubacki, Michael A" <michael.a.kubacki@intel.com>,
	"Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>,
	"Gao, Liming" <liming.gao@intel.com>
Subject: Re: [edk2-platforms] [PATCH v2 1/1] MinPlatformPkg/Acpi: MADT NMI default flag set to Edge-Triggered
Date: Mon, 2 Sep 2019 14:16:17 +0000	[thread overview]
Message-ID: <3C3EFB470A303B4AB093197B6777CCEC5047E7E2@PGSMSX111.gar.corp.intel.com> (raw)
In-Reply-To: <20190830222808.20308-1-ankit.sinha@intel.com>


Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>

> -----Original Message-----
> From: Sinha, Ankit
> Sent: Saturday, August 31, 2019 6:28 AM
> To: devel@edk2.groups.io
> Cc: Kubacki, Michael A <michael.a.kubacki@intel.com>; Chiu, Chasel
> <chasel.chiu@intel.com>; Desimone, Nathaniel L
> <nathaniel.l.desimone@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2-platforms] [PATCH v2 1/1] MinPlatformPkg/Acpi: MADT NMI
> default flag set to Edge-Triggered
> 
> 1. Default APIC NMI structure in MADT changed to expose
>    Level-Triggered interrupts.
> 2. x2APIC NMI structure won't be exposed to OS if x2APIC is not enabled.
> 
> Cc: Michael Kubacki <michael.a.kubacki@intel.com>
> Cc: Chasel Chiu <chasel.chiu@intel.com>
> Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> 
> Signed-off-by: Ankit Sinha <ankit.sinha@intel.com>
> ---
>  Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c | 54
> ++++++++++----------
>  1 file changed, 28 insertions(+), 26 deletions(-)
> 
> diff --git a/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
> b/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
> index 5eb727929bfb..1b251ca2962d 100644
> --- a/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
> +++ b/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
> @@ -1,7 +1,7 @@
>  /** @file
>    ACPI Platform Driver
> 
> -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2017 - 2019, Intel Corporation. All rights reserved.<BR>
>  SPDX-License-Identifier: BSD-2-Clause-Patent
> 
>  **/
> @@ -1049,7 +1049,7 @@ InstallMadtFromScratch (
>    LocalApciNmiStruct.Type   = EFI_ACPI_4_0_LOCAL_APIC_NMI;
>    LocalApciNmiStruct.Length = sizeof
> (EFI_ACPI_4_0_LOCAL_APIC_NMI_STRUCTURE);
>    LocalApciNmiStruct.AcpiProcessorId = 0xFF;      // Applies to all
> processors
> -  LocalApciNmiStruct.Flags           = 0x000D;    // Flags -
> Level-tiggered, Active High
> +  LocalApciNmiStruct.Flags           = 0x0005;    // Flags -
> Edge-tiggered, Active High
>    LocalApciNmiStruct.LocalApicLint   = 0x1;
> 
>    ASSERT (MadtStructsIndex < MaxMadtStructCount); @@ -1066,24
> +1066,26 @@ InstallMadtFromScratch (
>    //
>    // Build Local x2APIC NMI Structure
>    //
> -  LocalX2ApicNmiStruct.Type   = EFI_ACPI_4_0_LOCAL_X2APIC_NMI;
> -  LocalX2ApicNmiStruct.Length = sizeof
> (EFI_ACPI_4_0_LOCAL_X2APIC_NMI_STRUCTURE);
> -  LocalX2ApicNmiStruct.Flags  = 0x000D;                // Flags -
> Level-tiggered, Active High
> -  LocalX2ApicNmiStruct.AcpiProcessorUid = 0xFFFFFFFF;  // Applies to all
> processors
> -  LocalX2ApicNmiStruct.LocalX2ApicLint  = 0x01;
> -  LocalX2ApicNmiStruct.Reserved[0] = 0x00;
> -  LocalX2ApicNmiStruct.Reserved[1] = 0x00;
> -  LocalX2ApicNmiStruct.Reserved[2] = 0x00;
> +  if (mX2ApicEnabled) {
> +    LocalX2ApicNmiStruct.Type   = EFI_ACPI_4_0_LOCAL_X2APIC_NMI;
> +    LocalX2ApicNmiStruct.Length = sizeof
> (EFI_ACPI_4_0_LOCAL_X2APIC_NMI_STRUCTURE);
> +    LocalX2ApicNmiStruct.Flags  = 0x000D;                // Flags -
> Level-tiggered, Active High
> +    LocalX2ApicNmiStruct.AcpiProcessorUid = 0xFFFFFFFF;  // Applies to
> all processors
> +    LocalX2ApicNmiStruct.LocalX2ApicLint  = 0x01;
> +    LocalX2ApicNmiStruct.Reserved[0] = 0x00;
> +    LocalX2ApicNmiStruct.Reserved[1] = 0x00;
> +    LocalX2ApicNmiStruct.Reserved[2] = 0x00;
> 
> -  ASSERT (MadtStructsIndex < MaxMadtStructCount);
> -  Status = CopyStructure (
> -    &MadtTableHeader.Header,
> -    (STRUCTURE_HEADER *) &LocalX2ApicNmiStruct,
> -    &MadtStructs[MadtStructsIndex++]
> -    );
> -  if (EFI_ERROR (Status)) {
> -    DEBUG ((EFI_D_ERROR, "CopyMadtStructure (x2APIC NMI) failed: %r\n",
> Status));
> -    goto Done;
> +    ASSERT (MadtStructsIndex < MaxMadtStructCount);
> +    Status = CopyStructure (
> +      &MadtTableHeader.Header,
> +      (STRUCTURE_HEADER *) &LocalX2ApicNmiStruct,
> +      &MadtStructs[MadtStructsIndex++]
> +      );
> +    if (EFI_ERROR (Status)) {
> +      DEBUG ((DEBUG_ERROR, "CopyMadtStructure (x2APIC NMI) failed:
> %r\n", Status));
> +      goto Done;
> +    }
>    }
> 
>    //
> @@ -1167,7 +1169,7 @@ InstallMcfgFromScratch (
>    //
>    // Set MCFG table "Length" field based on the number of PCIe segments
> enumerated so far
>    //
> -  McfgTable->Header.Length = (UINT32)(sizeof
> (EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_HEA
> DER) +
> +  McfgTable->Header.Length = (UINT32)(sizeof
> +
> (EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_HEA
> DER) +
>                                        sizeof
> (EFI_ACPI_MEMORY_MAPPED_ENHANCED_CONFIGURATION_SPACE_BASE_A
> DDRESS_ALLOCATION_STRUCTURE) * SegmentCount);
> 
>    Segment = (VOID *)(McfgTable + 1);
> @@ -1329,11 +1331,11 @@ PlatformUpdateTables (
>      HpetCapabilities.Uint64  = HpetCapabilitiesData;
>      HpetCapabilitiesData     = MmioRead32 (HpetBaseAddress +
> HPET_GENERAL_CAPABILITIES_ID_OFFSET + 4);
>      HpetCapabilities.Uint64 |= LShiftU64 (HpetCapabilitiesData, 32);
> -    HpetBlockId.Bits.Revision       = HpetCapabilities.Bits.Revision;
> -    HpetBlockId.Bits.NumberOfTimers =
> HpetCapabilities.Bits.NumberOfTimers;
> -    HpetBlockId.Bits.CounterSize    = HpetCapabilities.Bits.CounterSize;
> -    HpetBlockId.Bits.Reserved       = 0;
> -    HpetBlockId.Bits.LegacyRoute    = HpetCapabilities.Bits.LegacyRoute;
> +    HpetBlockId.Bits.Revision       = HpetCapabilities.Bits.Revision;
> +    HpetBlockId.Bits.NumberOfTimers =
> HpetCapabilities.Bits.NumberOfTimers;
> +    HpetBlockId.Bits.CounterSize    = HpetCapabilities.Bits.CounterSize;
> +    HpetBlockId.Bits.Reserved       = 0;
> +    HpetBlockId.Bits.LegacyRoute    = HpetCapabilities.Bits.LegacyRoute;
>      HpetBlockId.Bits.VendorId       = HpetCapabilities.Bits.VendorId;
>      HpetTable->EventTimerBlockId    = HpetBlockId.Uint32;
>      HpetTable->MainCounterMinimumClockTickInPeriodicMode =
> (UINT16)HpetCapabilities.Bits.CounterClockPeriod;
> @@ -1459,7 +1461,7 @@ UpdateLocalTable (
> 
>    for (Index = 0; Index < sizeof(mLocalTable)/sizeof(mLocalTable[0]);
> Index++) {
>      CurrentTable = mLocalTable[Index];
> -
> +
>      PlatformUpdateTables (CurrentTable, &Version);
> 
>      TableHandle = 0;
> --
> 2.16.2.windows.1


  reply	other threads:[~2019-09-02 14:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30 22:28 [edk2-platforms] [PATCH v2 1/1] MinPlatformPkg/Acpi: MADT NMI default flag set to Edge-Triggered Sinha, Ankit
2019-09-02 14:16 ` Chiu, Chasel [this message]
2019-09-04  7:26 ` [edk2-devel] " Kubacki, Michael A

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3C3EFB470A303B4AB093197B6777CCEC5047E7E2@PGSMSX111.gar.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox