From: "Gao, Zhichao" <zhichao.gao@intel.com>
To: Philippe Mathieu-Daude <philmd@redhat.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: Antoine Coeur <coeur@gmx.fr>, "Ni, Ray" <ray.ni@intel.com>
Subject: Re: [PATCH 68/79] ShellPkg/Application: Fix various typos
Date: Fri, 13 Dec 2019 02:33:50 +0000 [thread overview]
Message-ID: <3CE959C139B4C44DBEA1810E3AA6F9000B893AA3@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20191203161602.15969-69-philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
> -----Original Message-----
> From: Philippe Mathieu-Daude [mailto:philmd@redhat.com]
> Sent: Wednesday, December 4, 2019 12:16 AM
> To: devel@edk2.groups.io
> Cc: Antoine Coeur <coeur@gmx.fr>; Ni, Ray <ray.ni@intel.com>; Gao,
> Zhichao <zhichao.gao@intel.com>; Philippe Mathieu-Daude
> <philmd@redhat.com>
> Subject: [PATCH 68/79] ShellPkg/Application: Fix various typos
>
> From: Antoine Coeur <coeur@gmx.fr>
>
> Fix various typos in comments and documentation.
>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Zhichao Gao <zhichao.gao@intel.com>
> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
> Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
> ---
> ShellPkg/Application/Shell/ConsoleLogger.h | 4 +--
> ShellPkg/Application/Shell/FileHandleWrappers.h | 6 ++--
> ShellPkg/Application/Shell/Shell.h | 2 +-
> ShellPkg/Application/Shell/ShellEnvVar.h | 36 ++++++++++----------
> ShellPkg/Application/Shell/ShellManParser.h | 10 +++---
> ShellPkg/Application/Shell/ShellParametersProtocol.h | 20 +++++------
> ShellPkg/Application/Shell/ShellProtocol.h | 12 +++----
> ShellPkg/Application/Shell/ConsoleLogger.c | 12 +++----
> ShellPkg/Application/Shell/ConsoleWrappers.c | 2 +-
> ShellPkg/Application/Shell/FileHandleWrappers.c | 8 ++---
> ShellPkg/Application/Shell/Shell.c | 8 ++---
> ShellPkg/Application/Shell/ShellEnvVar.c | 8 ++---
> ShellPkg/Application/Shell/ShellManParser.c | 20 +++++------
> ShellPkg/Application/Shell/ShellParametersProtocol.c | 26 +++++++-------
> ShellPkg/Application/Shell/ShellProtocol.c | 36 ++++++++++----------
> ShellPkg/Application/ShellCTestApp/README.txt | 2 +-
> 16 files changed, 106 insertions(+), 106 deletions(-)
>
> diff --git a/ShellPkg/Application/Shell/ConsoleLogger.h
> b/ShellPkg/Application/Shell/ConsoleLogger.h
> index c2d5a9dcd4e0..0a01bc2ca201 100644
> --- a/ShellPkg/Application/Shell/ConsoleLogger.h
> +++ b/ShellPkg/Application/Shell/ConsoleLogger.h
> @@ -117,7 +117,7 @@ UpdateDisplayFromHistory(
> );
>
> /**
> - Reset the text output device hardware and optionaly run diagnostics
> + Reset the text output device hardware and optionally run diagnostics
>
> @param This Pointer to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
> @param ExtendedVerification Indicates that a more extensive test may be
> performed @@ -305,7 +305,7 @@ ConsoleLoggerEnableCursor (
>
> @param[in] ConsoleInfo The pointer to the instance of the console logger
> information.
>
> - This will be used when a mode has changed or a reset ocurred to verify all
> + This will be used when a mode has changed or a reset occurred to
> + verify all
> history buffers.
> **/
> EFI_STATUS
> diff --git a/ShellPkg/Application/Shell/FileHandleWrappers.h
> b/ShellPkg/Application/Shell/FileHandleWrappers.h
> index 3398285d52f8..5d58bfb2f45c 100644
> --- a/ShellPkg/Application/Shell/FileHandleWrappers.h
> +++ b/ShellPkg/Application/Shell/FileHandleWrappers.h
> @@ -20,17 +20,17 @@ typedef struct {
> } SHELL_LINE_LOG;
>
> ///
> -/// FILE sytle interfaces for StdIn.
> +/// FILE styte interfaces for StdIn.
> ///
> extern EFI_FILE_PROTOCOL FileInterfaceStdIn;
>
> ///
> -/// FILE sytle interfaces for StdOut.
> +/// FILE styte interfaces for StdOut.
> ///
> extern EFI_FILE_PROTOCOL FileInterfaceStdOut;
>
> ///
> -/// FILE sytle interfaces for StdErr.
> +/// FILE styte interfaces for StdErr.
> ///
> extern EFI_FILE_PROTOCOL FileInterfaceStdErr;
>
> diff --git a/ShellPkg/Application/Shell/Shell.h
> b/ShellPkg/Application/Shell/Shell.h
> index 1227adc1eb63..e6eb150f57a5 100644
> --- a/ShellPkg/Application/Shell/Shell.h
> +++ b/ShellPkg/Application/Shell/Shell.h
> @@ -135,7 +135,7 @@ typedef struct {
> extern SHELL_INFO ShellInfoObject;
>
> /**
> - Converts the command line to it's post-processed form. this replaces
> variables and alias' per UEFI Shell spec.
> + Converts the command line to its post-processed form. this replaces
> variables and alias' per UEFI Shell spec.
>
> @param[in,out] CmdLine pointer to the command line to update
>
> diff --git a/ShellPkg/Application/Shell/ShellEnvVar.h
> b/ShellPkg/Application/Shell/ShellEnvVar.h
> index 854a71ad9709..6c8552ee6437 100644
> --- a/ShellPkg/Application/Shell/ShellEnvVar.h
> +++ b/ShellPkg/Application/Shell/ShellEnvVar.h
> @@ -43,14 +43,14 @@ IsVolatileEnv (
> );
>
> /**
> - Delete a Non-Violatile environment variable.
> + Delete a Non-Volatile environment variable.
>
> - This will use the Runtime Services call SetVariable to remove a non-violatile
> variable.
> + This will use the Runtime Services call SetVariable to remove a non-volatile
> variable.
>
> @param EnvVarName The name of the environment variable in
> question
>
> - @retval EFI_SUCCESS The variable was deleted sucessfully
> - @retval other An error ocurred
> + @retval EFI_SUCCESS The variable was deleted successfully
> + @retval other An error occurred
> @sa SetVariable
> **/
> #define SHELL_DELETE_ENVIRONMENT_VARIABLE(EnvVarName) \ @@ -
> 61,16 +61,16 @@ IsVolatileEnv (
> NULL))
>
> /**
> - Set a Non-Violatile environment variable.
> + Set a Non-Volatile environment variable.
>
> - This will use the Runtime Services call SetVariable to set a non-violatile
> variable.
> + This will use the Runtime Services call SetVariable to set a non-volatile
> variable.
>
> @param EnvVarName The name of the environment variable in
> question
> @param BufferSize UINTN size of Buffer
> @param Buffer Pointer to value to set variable to
>
> - @retval EFI_SUCCESS The variable was changed sucessfully
> - @retval other An error ocurred
> + @retval EFI_SUCCESS The variable was changed successfully
> + @retval other An error occurred
> @sa SetVariable
> **/
> #define
> SHELL_SET_ENVIRONMENT_VARIABLE_NV(EnvVarName,BufferSize,Buffer)
> \ @@ -89,8 +89,8 @@ IsVolatileEnv (
> @param BufferSize Pointer to the UINTN size of Buffer
> @param Buffer Pointer buffer to get variable value into
>
> - @retval EFI_SUCCESS The variable's value was retrieved sucessfully
> - @retval other An error ocurred
> + @retval EFI_SUCCESS The variable's value was retrieved successfully
> + @retval other An error occurred
> @sa SetVariable
> **/
> #define
> SHELL_GET_ENVIRONMENT_VARIABLE(EnvVarName,BufferSize,Buffer) \
> @@ -110,8 +110,8 @@ IsVolatileEnv (
> @param BufferSize Pointer to the UINTN size of Buffer
> @param Buffer Pointer buffer to get variable value into
>
> - @retval EFI_SUCCESS The variable's value was retrieved sucessfully
> - @retval other An error ocurred
> + @retval EFI_SUCCESS The variable's value was retrieved successfully
> + @retval other An error occurred
> @sa SetVariable
> **/
> #define
> SHELL_GET_ENVIRONMENT_VARIABLE_AND_ATTRIBUTES(EnvVarName,Atts
> ,BufferSize,Buffer) \
> @@ -122,16 +122,16 @@ IsVolatileEnv (
> Buffer))
>
> /**
> - Set a Violatile environment variable.
> + Set a Volatile environment variable.
>
> - This will use the Runtime Services call SetVariable to set a violatile variable.
> + This will use the Runtime Services call SetVariable to set a volatile variable.
>
> @param EnvVarName The name of the environment variable in
> question
> @param BufferSize UINTN size of Buffer
> @param Buffer Pointer to value to set variable to
>
> - @retval EFI_SUCCESS The variable was changed sucessfully
> - @retval other An error ocurred
> + @retval EFI_SUCCESS The variable was changed successfully
> + @retval other An error occurred
> @sa SetVariable
> **/
> #define
> SHELL_SET_ENVIRONMENT_VARIABLE_V(EnvVarName,BufferSize,Buffer) \
> @@ -147,7 +147,7 @@ IsVolatileEnv (
> @param[in, out] List The pointer to pointer to LIST_ENTRY object for
> storing this list.
>
> - @retval EFI_SUCCESS the list was created sucessfully.
> + @retval EFI_SUCCESS the list was created successfully.
> **/
> EFI_STATUS
> GetEnvironmentVariableList(
> @@ -164,7 +164,7 @@ GetEnvironmentVariableList(
> @param[in] List The pointer to LIST_ENTRY from
> GetShellEnvVarList().
>
> - @retval EFI_SUCCESS The list was Set sucessfully.
> + @retval EFI_SUCCESS The list was Set successfully.
> **/
> EFI_STATUS
> SetEnvironmentVariableList(
> diff --git a/ShellPkg/Application/Shell/ShellManParser.h
> b/ShellPkg/Application/Shell/ShellManParser.h
> index 6fbad3aaaaec..04031e007fe9 100644
> --- a/ShellPkg/Application/Shell/ShellManParser.h
> +++ b/ShellPkg/Application/Shell/ShellManParser.h
> @@ -19,7 +19,7 @@
> information will be returned. If Sections is NULL, then all help text
> information
> available will be returned.
>
> - if BriefDesc is NULL, then the breif description will not be savedd seperatly,
> + if BriefDesc is NULL, then the breif description will not be savedd
> + separately,
> but placed first in the main HelpText.
>
> @param[in] ManFileName Points to the NULL-terminated UEFI Shell
> MAN file name.
> @@ -49,11 +49,11 @@ ProcessManFile(
>
> /**
> parses through the MAN file specified by SHELL_FILE_HANDLE and returns
> the
> - detailed help for any sub section specified in the comma seperated list of
> + detailed help for any sub section specified in the comma separated
> + list of
> sections provided. If the end of the file or a .TH section is found then
> return.
>
> - Upon a sucessful return the caller is responsible to free the memory in
> *HelpText
> + Upon a successful return the caller is responsible to free the memory
> + in *HelpText
>
> @param[in] Handle FileHandle to read from
> @param[in] Sections name of command's sub sections to find
> @@ -62,8 +62,8 @@ ProcessManFile(
> @param[in] Ascii TRUE if the file is ASCII, FALSE otherwise.
>
> @retval EFI_OUT_OF_RESOURCES a memory allocation failed.
> - @retval EFI_SUCCESS the section was found and its description sotred
> in
> - an alloceted buffer.
> + @retval EFI_SUCCESS the section was found and its description stored
> in
> + an allocated buffer.
> **/
> EFI_STATUS
> ManFileFindSections(
> diff --git a/ShellPkg/Application/Shell/ShellParametersProtocol.h
> b/ShellPkg/Application/Shell/ShellParametersProtocol.h
> index df0316a03091..398147c8bd4c 100644
> --- a/ShellPkg/Application/Shell/ShellParametersProtocol.h
> +++ b/ShellPkg/Application/Shell/ShellParametersProtocol.h
> @@ -43,7 +43,7 @@ CreatePopulateInstallShellParametersProtocol (
> );
>
> /**
> - frees all memory used by createion and installation of shell parameters
> protocol
> + frees all memory used by creation and installation of shell
> + parameters protocol
> and if there was an old version installed it will restore that one.
>
> @param NewShellParameters the interface of
> EFI_SHELL_PARAMETERS_PROTOCOL that is @@ -60,7 +60,7 @@
> CleanUpShellParametersProtocol (
> );
>
> /**
> - Funcion will replace the current Argc and Argv in the ShellParameters
> protocol
> + Function will replace the current Argc and Argv in the
> + ShellParameters protocol
> structure by parsing NewCommandLine. The current values are returned to
> the
> user.
>
> @@ -70,7 +70,7 @@ CleanUpShellParametersProtocol (
> @param[out] OldArgv pointer to old list of parameters
> @param[out] OldArgc pointer to old number of items in Argv list
>
> - @retval EFI_SUCCESS operation was sucessful, Argv and Argc are
> valid
> + @retval EFI_SUCCESS operation was successful, Argv and Argc are
> valid
> @retval EFI_OUT_OF_RESOURCES a memory allocation failed.
> **/
> EFI_STATUS
> @@ -83,7 +83,7 @@ UpdateArgcArgv(
> );
>
> /**
> - Funcion will replace the current Argc and Argv in the ShellParameters
> protocol
> + Function will replace the current Argc and Argv in the
> + ShellParameters protocol
> structure with Argv and Argc. The current values are de-allocated and the
> OldArgv must not be deallocated by the caller.
>
> @@ -108,7 +108,7 @@ typedef struct {
> } SYSTEM_TABLE_INFO;
>
> /**
> - Funcion will replace the current StdIn and StdOut in the ShellParameters
> protocol
> + Function will replace the current StdIn and StdOut in the
> + ShellParameters protocol
> structure by parsing NewCommandLine. The current values are returned to
> the
> user.
>
> @@ -121,7 +121,7 @@ typedef struct {
> @param[out] OldStdErr Pointer to old StdErr.
> @param[out] SystemTableInfo Pointer to old system table
> information.
>
> - @retval EFI_SUCCESS Operation was sucessful, Argv and Argc are
> valid.
> + @retval EFI_SUCCESS Operation was successful, Argv and Argc are
> valid.
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> **/
> EFI_STATUS
> @@ -135,7 +135,7 @@ UpdateStdInStdOutStdErr(
> );
>
> /**
> - Funcion will replace the current StdIn and StdOut in the ShellParameters
> protocol
> + Function will replace the current StdIn and StdOut in the
> + ShellParameters protocol
> structure with StdIn and StdOut. The current values are de-allocated.
>
> @param[in, out] ShellParameters Pointer to parameter structure to
> modify.
> @@ -166,7 +166,7 @@ RestoreStdInStdOutStdErr (
> @param[in, out] Argv pointer to array of strings; one for each
> parameter
> @param[in, out] Argc pointer to number of strings in Argv array
>
> - @return EFI_SUCCESS the operation was sucessful
> + @return EFI_SUCCESS the operation was successful
> @return EFI_OUT_OF_RESOURCES a memory allocation failed.
> **/
> EFI_STATUS
> @@ -188,13 +188,13 @@ ParseCommandLineToArgs(
> function.
>
> @param[in, out] Walker pointer to string of command line. Adjusted
> to
> - reminaing command line on return
> + remaining command line on return
> @param[in, out] TempParameter pointer to string of command line item
> extracted.
> @param[in] Length Length of (*TempParameter) in bytes
> @param[in] StripQuotation if TRUE then strip the quotation marks
> surrounding
> the parameters.
>
> - @return EFI_INALID_PARAMETER A required parameter was NULL or
> pointed to a NULL or empty string.
> + @return EFI_INVALID_PARAMETER A required parameter was NULL or
> pointed to a NULL or empty string.
> @return EFI_NOT_FOUND A closing " could not be found on the
> specified string
> **/
> EFI_STATUS
> diff --git a/ShellPkg/Application/Shell/ShellProtocol.h
> b/ShellPkg/Application/Shell/ShellProtocol.h
> index dcef16e43748..472d98dba2e7 100644
> --- a/ShellPkg/Application/Shell/ShellProtocol.h
> +++ b/ShellPkg/Application/Shell/ShellProtocol.h
> @@ -283,8 +283,8 @@ EfiShellBatchIsActive (
> @param Attributes the File Attributes to use when creating a new
> file
>
> @retval EFI_SUCCESS the file is open and FileHandle is valid
> - @retval EFI_UNSUPPORTED the device path cotained non-path
> elements
> - @retval other an error ocurred.
> + @retval EFI_UNSUPPORTED the device path contained non-path
> elements
> + @retval other an error occurred.
> **/
> EFI_STATUS
> InternalOpenFileDevicePath(
> @@ -309,7 +309,7 @@ InternalOpenFileDevicePath(
> already exists and is non-volatile then EFI_INVALID_PARAMETER is
> returned.
>
> @param FileName Pointer to NULL-terminated file path
> - @param FileAttribs The new file's attrbiutes. the different attributes
> are
> + @param FileAttribs The new file's attributes. the different attributes
> are
> described in EFI_FILE_PROTOCOL.Open().
> @param FileHandle On return, points to the created file handle or
> directory's handle
>
> @@ -734,7 +734,7 @@ EfiShellGetCurDir(
> directory is changed.
> @param Dir Points to the NULL-terminated directory on the
> device specified by FileSystem.
>
> - @retval EFI_SUCCESS The operation was sucessful
> + @retval EFI_SUCCESS The operation was successful
> **/
> EFI_STATUS
> EFIAPI
> @@ -818,7 +818,7 @@ EfiShellIsRootShell(
> If Alias is NULL, ReturnedData points to a ';'
> delimited list of alias (e.g.
> ReturnedData = "dir;del;copy;mfp") that is NULL-terminated.
> - @retval NULL an error ocurred
> + @retval NULL an error occurred
> @retval NULL Alias was not a valid Alias
> **/
> CONST CHAR16 *
> @@ -915,7 +915,7 @@ InternalEfiShellSetEnv(
> feature's enabled state was not known when the shell initially launched.
>
> @retval EFI_SUCCESS The feature is enabled.
> - @retval EFI_OUT_OF_RESOURCES There is not enough mnemory
> available.
> + @retval EFI_OUT_OF_RESOURCES There is not enough memory available.
> **/
> EFI_STATUS
> InernalEfiShellStartMonitor(
> diff --git a/ShellPkg/Application/Shell/ConsoleLogger.c
> b/ShellPkg/Application/Shell/ConsoleLogger.c
> index 6c4e26265407..36ba3ac2254c 100644
> --- a/ShellPkg/Application/Shell/ConsoleLogger.c
> +++ b/ShellPkg/Application/Shell/ConsoleLogger.c
> @@ -310,9 +310,9 @@ UpdateDisplayFromHistory(
> StringSegment = &Screen[Column];
>
> //
> - // Find the first char with a different arrribute and make that temporarily
> NULL
> + // Find the first char with a different attribute and make that
> + temporarily NULL
> // so we can do fewer printout statements. (later) restore that one and
> we will
> - // start at that collumn on the next loop.
> + // start at that column on the next loop.
> //
> StringSegmentEndChar = CHAR_NULL;
> for ( StringSegmentEnd = StringSegment @@ -395,7 +395,7 @@
> UpdateDisplayFromHistory( }
>
> /**
> - Reset the text output device hardware and optionaly run diagnostics
> + Reset the text output device hardware and optionally run diagnostics
>
> @param This pointer to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
> @param ExtendedVerification Indicates that a more extensive test may be
> performed @@ -723,7 +723,7 @@ ConsoleLoggerPrintWithPageBreak(
> ConsoleLoggerOutputStringSplit (LineStart, ConsoleInfo);
>
> //
> - // restore the temp NULL terminator to it's original character
> + // restore the temp NULL terminator to its original character
> //
> *((CHAR16*)(Walker+1)) = TempChar;
>
> @@ -770,7 +770,7 @@ ConsoleLoggerPrintWithPageBreak(
> ConsoleLoggerOutputStringSplit (LineStart, ConsoleInfo);
>
> //
> - // restore the temp NULL terminator to it's original character
> + // restore the temp NULL terminator to its original character
> //
> *((CHAR16*)(Walker+1)) = TempChar;
>
> @@ -1189,7 +1189,7 @@ ConsoleLoggerEnableCursor (
>
> @param[in] ConsoleInfo The pointer to the instance of the console logger
> information.
>
> - This will be used when a mode has changed or a reset ocurred to verify all
> + This will be used when a mode has changed or a reset occurred to
> + verify all
> history buffers.
> **/
> EFI_STATUS
> diff --git a/ShellPkg/Application/Shell/ConsoleWrappers.c
> b/ShellPkg/Application/Shell/ConsoleWrappers.c
> index b573b53cf4f3..ec340de4e128 100644
> --- a/ShellPkg/Application/Shell/ConsoleWrappers.c
> +++ b/ShellPkg/Application/Shell/ConsoleWrappers.c
> @@ -220,7 +220,7 @@ CloseSimpleTextInOnFile( }
>
> /**
> - Reset the text output device hardware and optionaly run diagnostics.
> + Reset the text output device hardware and optionally run diagnostics.
>
> @param This pointer to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
> @param ExtendedVerification Indicates that a more extensive test may be
> performed diff --git a/ShellPkg/Application/Shell/FileHandleWrappers.c
> b/ShellPkg/Application/Shell/FileHandleWrappers.c
> index 2d7bd7bec67e..a622a763f85e 100644
> --- a/ShellPkg/Application/Shell/FileHandleWrappers.c
> +++ b/ShellPkg/Application/Shell/FileHandleWrappers.c
> @@ -517,7 +517,7 @@ FileInterfaceStdInRead(
> gST->ConOut->QueryMode (gST->ConOut, gST->ConOut->Mode->Mode,
> &TotalColumn, &TotalRow);
>
> //
> - // Limit the line length to the buffer size or the minimun size of the
> + // Limit the line length to the buffer size or the minimum size of
> + the
> // screen. (The smaller takes effect)
> //
> MaxStr = TotalColumn * (TotalRow - 1) - StartColumn; @@ -865,7 +865,7
> @@ FileInterfaceStdInRead(
> //
> if (Key.UnicodeChar != CHAR_BACKSPACE && !(Key.UnicodeChar == 0 &&
> Key.ScanCode == SCAN_DELETE)) {
> //
> - // Calulate row and column of the tail of current string
> + // Calculate row and column of the tail of current string
> //
> TailRow = Row + (StringLen - StringCurPos + Column + OutputLength) /
> TotalColumn;
> TailColumn = (StringLen - StringCurPos + Column + OutputLength) %
> TotalColumn; @@ -932,7 +932,7 @@ FileInterfaceStdInRead( }
>
> //
> -// FILE sytle interfaces for StdIn/StdOut/StdErr
> +// FILE style interfaces for StdIn/StdOut/StdErr
> //
> EFI_FILE_PROTOCOL FileInterfaceStdIn = {
> EFI_FILE_REVISION,
> @@ -1069,7 +1069,7 @@ FileInterfaceEnvClose(
> ) {
> ((CHAR16*)NewBuffer)[TotalSize / sizeof (CHAR16) - 3] = CHAR_NULL;
> //
> - // If the NewBuffer end with \r\n\0, We will repace '\r' by '\0' and then
> update TotalSize.
> + // If the NewBuffer end with \r\n\0, We will replace '\r' by '\0' and then
> update TotalSize.
> //
> TotalSize -= sizeof(CHAR16) * 2;
> }
> diff --git a/ShellPkg/Application/Shell/Shell.c
> b/ShellPkg/Application/Shell/Shell.c
> index d16adae0ea30..a5563070972e 100644
> --- a/ShellPkg/Application/Shell/Shell.c
> +++ b/ShellPkg/Application/Shell/Shell.c
> @@ -1081,7 +1081,7 @@ ProcessCommandLine(
> }
> }
> //
> - // If an argumnent contains a space, then add double quotes before the
> argument
> + // If an argument contains a space, then add double quotes
> + before the argument
> //
> if (StrStr (gEfiShellParametersProtocol->Argv[LoopVar], L" ") != NULL) {
> StrnCatGrow(&ShellInfoObject.ShellInitSettings.FileOptions,
> @@ -1102,7 +1102,7 @@ ProcessCommandLine(
> return (EFI_OUT_OF_RESOURCES);
> }
> //
> - // If an argumnent contains a space, then add double quotes after the
> argument
> + // If an argument contains a space, then add double quotes
> + after the argument
> //
> if (StrStr (gEfiShellParametersProtocol->Argv[LoopVar], L" ") != NULL) {
> StrnCatGrow(&ShellInfoObject.ShellInitSettings.FileOptions,
> @@ -1176,7 +1176,7 @@ LocateStartupScript (
> }
>
> //
> - // Try to find 'Startup.nsh' in the execution path defined by the
> envrionment variable PATH.
> + // Try to find 'Startup.nsh' in the execution path defined by the
> environment variable PATH.
> //
> if ((StartupScriptPath == NULL) || EFI_ERROR (ShellIsFile
> (StartupScriptPath))) {
> SHELL_FREE_NON_NULL (StartupScriptPath); @@ -2251,7 +2251,7 @@
> SetLastError( }
>
> /**
> - Converts the command line to it's post-processed form. this replaces
> variables and alias' per UEFI Shell spec.
> + Converts the command line to its post-processed form. this replaces
> variables and alias' per UEFI Shell spec.
>
> @param[in,out] CmdLine pointer to the command line to update
>
> diff --git a/ShellPkg/Application/Shell/ShellEnvVar.c
> b/ShellPkg/Application/Shell/ShellEnvVar.c
> index dbeb8216986a..04fed3bf9141 100644
> --- a/ShellPkg/Application/Shell/ShellEnvVar.c
> +++ b/ShellPkg/Application/Shell/ShellEnvVar.c
> @@ -118,7 +118,7 @@ FreeEnvironmentVariableList(
> @param[in, out] ListHead The pointer to pointer to LIST ENTRY object for
> storing this list.
>
> - @retval EFI_SUCCESS the list was created sucessfully.
> + @retval EFI_SUCCESS the list was created successfully.
> **/
> EFI_STATUS
> GetEnvironmentVariableList(
> @@ -233,7 +233,7 @@ GetEnvironmentVariableList(
> @param[in] ListHead The pointer to LIST_ENTRY from
> GetShellEnvVarList().
>
> - @retval EFI_SUCCESS the list was Set sucessfully.
> + @retval EFI_SUCCESS the list was Set successfully.
> **/
> EFI_STATUS
> SetEnvironmentVariableList(
> @@ -266,7 +266,7 @@ SetEnvironmentVariableList(
> FreeEnvironmentVariableList(&VarList.Link);
>
> //
> - // set all the variables fron the list
> + // set all the variables from the list
> //
> for ( Node = (ENV_VAR_LIST*)GetFirstNode(ListHead)
> ; !IsNull(ListHead, &Node->Link)
> @@ -479,7 +479,7 @@ ShellAddEnvVarToList (
> }
>
> //
> - // If the environment varialbe key doesn't exist in list just insert
> + // If the environment variable key doesn't exist in list just insert
> // a new node.
> //
> LocalKey = AllocateCopyPool (StrSize(Key), Key); diff --git
> a/ShellPkg/Application/Shell/ShellManParser.c
> b/ShellPkg/Application/Shell/ShellManParser.c
> index 4d5a5668aa15..d5a85cb8cc3f 100644
> --- a/ShellPkg/Application/Shell/ShellManParser.c
> +++ b/ShellPkg/Application/Shell/ShellManParser.c
> @@ -179,12 +179,12 @@ SearchPathForFile( }
>
> /**
> - parses through the MAN file specified by SHELL_FILE_HANDLE and returns
> the
> - detailed help for any sub section specified in the comma seperated list of
> + Parses through the MAN file specified by SHELL_FILE_HANDLE and
> + returns the detailed help for any sub section specified in the comma
> + separated list of
> sections provided. If the end of the file or a .TH section is found then
> return.
>
> - Upon a sucessful return the caller is responsible to free the memory in
> *HelpText
> + Upon a successful return the caller is responsible to free the memory
> + in *HelpText
>
> @param[in] Handle FileHandle to read from
> @param[in] Sections name of command's sub sections to find
> @@ -193,8 +193,8 @@ SearchPathForFile(
> @param[in] Ascii TRUE if the file is ASCII, FALSE otherwise.
>
> @retval EFI_OUT_OF_RESOURCES a memory allocation failed.
> - @retval EFI_SUCCESS the section was found and its description sotred
> in
> - an alloceted buffer.
> + @retval EFI_SUCCESS the section was found and its description stored
> in
> + an allocated buffer.
> **/
> EFI_STATUS
> ManFileFindSections(
> @@ -296,11 +296,11 @@ ManFileFindSections(
> /**
> Parses a line from a MAN file to see if it is the Title Header. If it is, then
> if the "Brief Description" is desired, allocate a buffer for it and return a
> - copy. Upon a sucessful return the caller is responsible to free the memory
> in
> + copy. Upon a successful return the caller is responsible to free the
> + memory in
> *BriefDesc
>
> Uses a simple state machine that allows "unlimited" whitespace before and
> after the
> - ".TH", compares Command and the MAN file commnd name without
> respect to case, and
> + ".TH", compares Command and the MAN file command name without
> respect
> + to case, and
> allows "unlimited" whitespace and '0' and '1' characters before the Short
> Description.
> The PCRE regex describing this functionality is:
> ^\s*\.TH\s+(\S)\s[\s01]*(.*)$
> where group 1 is the Command Name and group 2 is the Short Description.
> @@ -421,11 +421,11 @@ IsTitleHeader(
> }
>
> /**
> - parses through the MAN file specified by SHELL_FILE_HANDLE and returns
> the
> + Parses through the MAN file specified by SHELL_FILE_HANDLE and
> + returns the
> "Brief Description" for the .TH section as specified by Command. If the
> command section is not found return EFI_NOT_FOUND.
>
> - Upon a sucessful return the caller is responsible to free the memory in
> *BriefDesc
> + Upon a successful return the caller is responsible to free the memory
> + in *BriefDesc
>
> @param[in] Handle FileHandle to read from
> @param[in] Command name of command's section to find as entered
> on the
> @@ -512,7 +512,7 @@ ManFileFindTitleSection(
> information will be returned. If Sections is NULL, then all help text
> information
> available will be returned.
>
> - if BriefDesc is NULL, then the breif description will not be savedd seperatly,
> + if BriefDesc is NULL, then the breif description will not be saved
> + separately,
> but placed first in the main HelpText.
>
> @param[in] ManFileName Points to the NULL-terminated UEFI Shell
> MAN file name.
> diff --git a/ShellPkg/Application/Shell/ShellParametersProtocol.c
> b/ShellPkg/Application/Shell/ShellParametersProtocol.c
> index bcd8f0ae2112..ef3966d3b08f 100644
> --- a/ShellPkg/Application/Shell/ShellParametersProtocol.c
> +++ b/ShellPkg/Application/Shell/ShellParametersProtocol.c
> @@ -69,13 +69,13 @@ FindEndOfParameter(
> This will also remove all remaining ^ characters after processing.
>
> @param[in, out] Walker pointer to string of command line. Adjusted
> to
> - reminaing command line on return
> + remaining command line on return
> @param[in, out] TempParameter pointer to string of command line item
> extracted.
> @param[in] Length buffer size of TempParameter.
> @param[in] StripQuotation if TRUE then strip the quotation marks
> surrounding
> the parameters.
>
> - @return EFI_INALID_PARAMETER A required parameter was NULL or
> pointed to a NULL or empty string.
> + @return EFI_INVALID_PARAMETER A required parameter was NULL or
> pointed to a NULL or empty string.
> @return EFI_NOT_FOUND A closing " could not be found on the
> specified string
> **/
> EFI_STATUS
> @@ -126,7 +126,7 @@ DEBUG_CODE_END();
> StrnCpyS(*TempParameter, Length / sizeof(CHAR16), (*Walker),
> NextDelim - *Walker);
>
> //
> - // Add a CHAR_NULL if we didnt get one via the copy
> + // Add a CHAR_NULL if we didn't get one via the copy
> //
> if (*NextDelim != CHAR_NULL) {
> (*TempParameter)[NextDelim - *Walker] = CHAR_NULL; @@ -184,7
> +184,7 @@ DEBUG_CODE_END();
> @param[in, out] Argv pointer to array of strings; one for each
> parameter
> @param[in, out] Argc pointer to number of strings in Argv array
>
> - @return EFI_SUCCESS the operation was sucessful
> + @return EFI_SUCCESS the operation was successful
> @return EFI_OUT_OF_RESOURCES a memory allocation failed.
> **/
> EFI_STATUS
> @@ -416,7 +416,7 @@ CreatePopulateInstallShellParametersProtocol ( }
>
> /**
> - frees all memory used by createion and installation of shell parameters
> protocol
> + frees all memory used by creation and installation of shell
> + parameters protocol
> and if there was an old version installed it will restore that one.
>
> @param NewShellParameters the interface of
> EFI_SHELL_PARAMETERS_PROTOCOL that is @@ -466,7 +466,7 @@
> CleanUpShellParametersProtocol ( }
>
> /**
> - Determin if a file name represents a unicode file.
> + Determine if a file name represents a unicode file.
>
> @param[in] FileName Pointer to the filename to open.
>
> @@ -526,7 +526,7 @@ StripQuotes (
> }
>
> /**
> - Calcualte the 32-bit CRC in a EFI table using the service provided by the
> + Calculate the 32-bit CRC in a EFI table using the service provided by
> + the
> gRuntime service.
>
> @param Hdr Pointer to an EFI standard header
> @@ -651,7 +651,7 @@ WriteFileTag (
>
>
> /**
> - Funcion will replace the current StdIn and StdOut in the ShellParameters
> protocol
> + Function will replace the current StdIn and StdOut in the
> + ShellParameters protocol
> structure by parsing NewCommandLine. The current values are returned to
> the
> user.
>
> @@ -664,7 +664,7 @@ WriteFileTag (
> @param[out] OldStdErr Pointer to old StdErr.
> @param[out] SystemTableInfo Pointer to old system table
> information.
>
> - @retval EFI_SUCCESS Operation was sucessful, Argv and Argc are
> valid.
> + @retval EFI_SUCCESS Operation was successful, Argv and Argc are
> valid.
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> **/
> EFI_STATUS
> @@ -1257,7 +1257,7 @@ UpdateStdInStdOutStdErr( }
>
> /**
> - Funcion will replace the current StdIn and StdOut in the ShellParameters
> protocol
> + Function will replace the current StdIn and StdOut in the
> + ShellParameters protocol
> structure with StdIn and StdOut. The current values are de-allocated.
>
> @param[in, out] ShellParameters Pointer to parameter structure to
> modify.
> @@ -1327,7 +1327,7 @@ RestoreStdInStdOutStdErr (
> return (EFI_SUCCESS);
> }
> /**
> - Funcion will replace the current Argc and Argv in the ShellParameters
> protocol
> + Function will replace the current Argc and Argv in the
> + ShellParameters protocol
> structure by parsing NewCommandLine. The current values are returned to
> the
> user.
>
> @@ -1339,7 +1339,7 @@ RestoreStdInStdOutStdErr (
> @param[out] OldArgv Pointer to old list of parameters.
> @param[out] OldArgc Pointer to old number of items in Argv list.
>
> - @retval EFI_SUCCESS Operation was sucessful, Argv and Argc are
> valid.
> + @retval EFI_SUCCESS Operation was successful, Argv and Argc are
> valid.
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> **/
> EFI_STATUS
> @@ -1375,7 +1375,7 @@ UpdateArgcArgv(
> }
>
> /**
> - Funcion will replace the current Argc and Argv in the ShellParameters
> protocol
> + Function will replace the current Argc and Argv in the
> + ShellParameters protocol
> structure with Argv and Argc. The current values are de-allocated and the
> OldArgv must not be deallocated by the caller.
>
> diff --git a/ShellPkg/Application/Shell/ShellProtocol.c
> b/ShellPkg/Application/Shell/ShellProtocol.c
> index 5e529b6568a9..9a25e703f628 100644
> --- a/ShellPkg/Application/Shell/ShellProtocol.c
> +++ b/ShellPkg/Application/Shell/ShellProtocol.c
> @@ -96,7 +96,7 @@ InternalShellProtocolIsSimpleFileSystemPresent(
> /**
> This function creates a mapping for a device path.
>
> - If both DeviecPath and Mapping are NULL, this will reset the mapping to
> default values.
> + If both DevicePath and Mapping are NULL, this will reset the mapping to
> default values.
>
> @param DevicePath Points to the device path. If this is NULL and
> Mapping points to a valid mapping,
> then the mapping will be deleted.
> @@ -152,7 +152,7 @@ EfiShellSetMap(
> } // for loop
>
> //
> - // We didnt find one to delete
> + // We didn't find one to delete
> //
> return (EFI_NOT_FOUND);
> }
> @@ -232,7 +232,7 @@ EfiShellGetDevicePathFromMap(
> device path. If there is an exact match, the mapping is returned and
> *DevicePath
> points to the end-of-device-path node.
>
> - If there are multiple map names they will be semi-colon seperated in the
> + If there are multiple map names they will be semi-colon separated in
> + the
> NULL-terminated string.
>
> @param DevicePath On entry, points to a device path pointer. On
> @@ -910,8 +910,8 @@ EfiShellBatchIsActive (
> @param Attributes the File Attributes to use when creating a new
> file.
>
> @retval EFI_SUCCESS the file is open and FileHandle is valid
> - @retval EFI_UNSUPPORTED the device path cotained non-path
> elements
> - @retval other an error ocurred.
> + @retval EFI_UNSUPPORTED the device path contained non-path
> elements
> + @retval other an error occurred.
> **/
> EFI_STATUS
> InternalOpenFileDevicePath(
> @@ -946,7 +946,7 @@ InternalOpenFileDevicePath(
> Handle1 = ConvertShellHandleToEfiFileProtocol(ShellHandle);
> if (Handle1 != NULL) {
> //
> - // chop off the begining part before the file system part...
> + // chop off the beginning part before the file system part...
> //
> ///@todo BlockIo?
> Status = gBS->LocateDevicePath(&gEfiSimpleFileSystemProtocolGuid,
> @@ -1064,14 +1064,14 @@ InternalOpenFileDevicePath(
> already exists and is non-volatile then EFI_INVALID_PARAMETER is
> returned.
>
> @param FileName Pointer to NULL-terminated file path
> - @param FileAttribs The new file's attrbiutes. the different attributes
> are
> + @param FileAttribs The new file's attributes. the different attributes
> are
> described in EFI_FILE_PROTOCOL.Open().
> @param FileHandle On return, points to the created file handle or
> directory's handle
>
> @retval EFI_SUCCESS The file was opened. FileHandle points to the new
> file's handle.
> @retval EFI_INVALID_PARAMETER One of the parameters has an invalid
> value.
> @retval EFI_UNSUPPORTED could not open the file path
> - @retval EFI_NOT_FOUND the specified file could not be found on the
> devide, or could not
> + @retval EFI_NOT_FOUND the specified file could not be found on the
> device, or could not
> file the file system on the device.
> @retval EFI_NO_MEDIA the device has no medium.
> @retval EFI_MEDIA_CHANGED The device has a different medium in it or
> the medium is no @@ -1905,7 +1905,7 @@ typedef struct {
> @param[in] Node The node to copy from.
> @param[in] Save TRUE to set Node->Handle to NULL, FALSE otherwise.
>
> - @retval NULL a memory allocation error ocurred
> + @retval NULL a memory allocation error occurred
> @return != NULL a pointer to the new node
> **/
> EFI_SHELL_FILE_INFO*
> @@ -1957,7 +1957,7 @@ InternalDuplicateShellFileInfo(
> @param[in] Handle Handle member initial value.
> @param[in] Info Info struct to copy.
>
> - @retval NULL An error ocurred.
> + @retval NULL An error occurred.
> @return a pointer to the newly allocated structure.
> **/
> EFI_SHELL_FILE_INFO *
> @@ -2117,7 +2117,7 @@ EfiShellFindFilesInDir(
> //
> ShellFileListItem = CreateAndPopulateShellFileInfo(
> BasePath,
> - EFI_SUCCESS, // success since we didnt fail to open it...
> + EFI_SUCCESS, // success since we didn't fail to open it...
> FileInfo->FileName,
> NULL, // no handle since not open
> FileInfo);
> @@ -2703,7 +2703,7 @@ EfiShellGetEnvEx(
> Status =
> SHELL_GET_ENVIRONMENT_VARIABLE_AND_ATTRIBUTES(Name,
> Attributes, &Size, Buffer);
> }
> //
> - // we didnt get it (might not exist)
> + // we didn't get it (might not exist)
> // free the memory if we allocated any and return NULL
> //
> if (EFI_ERROR(Status)) {
> @@ -2924,7 +2924,7 @@ EfiShellGetCurDir(
> directory is changed.
> @param Dir Points to the NULL-terminated directory on the
> device specified by FileSystem.
>
> - @retval EFI_SUCCESS The operation was sucessful
> + @retval EFI_SUCCESS The operation was successful
> @retval EFI_NOT_FOUND The file system could not be found
> **/
> EFI_STATUS
> @@ -3176,12 +3176,12 @@ EfiShellIsRootShell( }
>
> /**
> - function to return a semi-colon delimeted list of all alias' in the current shell
> + function to return a semi-colon delimited list of all alias' in the
> + current shell
>
> up to caller to free the memory.
>
> @retval NULL No alias' were found
> - @retval NULL An error ocurred getting alias'
> + @retval NULL An error occurred getting alias'
> @return !NULL a list of all alias'
> **/
> CHAR16 *
> @@ -3284,7 +3284,7 @@ ToLower (
> If Alias is NULL, ReturnedData points to a ';'
> delimited list of alias (e.g.
> ReturnedData = "dir;del;copy;mfp") that is NULL-terminated.
> - @retval NULL an error ocurred
> + @retval NULL an error occurred
> @retval NULL Alias was not a valid Alias
> **/
> CONST CHAR16 *
> @@ -3609,7 +3609,7 @@ CreatePopulateInstallShellProtocol (
> (VOID*)(&mShellProtocol));
> if (!EFI_ERROR(Status)) {
> //
> - // we reinstalled sucessfully. log this so we can reverse it later.
> + // we reinstalled successfully. log this so we can reverse it later.
> //
>
> //
> @@ -3756,7 +3756,7 @@ NotificationFunction(
> feature's enabled state was not known when the shell initially launched.
>
> @retval EFI_SUCCESS The feature is enabled.
> - @retval EFI_OUT_OF_RESOURCES There is not enough mnemory
> available.
> + @retval EFI_OUT_OF_RESOURCES There is not enough memory available.
> **/
> EFI_STATUS
> InernalEfiShellStartMonitor(
> diff --git a/ShellPkg/Application/ShellCTestApp/README.txt
> b/ShellPkg/Application/ShellCTestApp/README.txt
> index 02594e0d1208..d788d3ef62a9 100644
> --- a/ShellPkg/Application/ShellCTestApp/README.txt
> +++ b/ShellPkg/Application/ShellCTestApp/README.txt
> @@ -1,5 +1,5 @@
> TestArgv.nsh is a very simple shell script to test how the interpreter parses
> the parameters. It uses ShellCTestApp.efi to dump the parameters passed
> from the -intepreter.
> +interpreter.
>
> TestArgv.log is the desired output created using "TestArgv.nsh >
> TestArgv.log".
> --
> 2.21.0
prev parent reply other threads:[~2019-12-13 2:33 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-03 16:14 [PATCH 00/79] Fix a bunch of typos (part 1) Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 01/79] CryptoPkg/OpensslLib: Fix few typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 02/79] EmbeddedPkg/FdtLib: Fix a typo Philippe Mathieu-Daudé
2019-12-03 16:58 ` Leif Lindholm
2019-12-03 16:14 ` [PATCH 03/79] EmbeddedPkg/VirtualKeyboard: Fix a typo in EFI_INVALID_PARAMETER Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 04/79] EmbeddedPkg/VirtualKeyboard: Fix few typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 05/79] EmulatorPkg/Sec: Fix various typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 06/79] EmulatorPkg/Unix: " Philippe Mathieu-Daudé
2019-12-20 6:38 ` Ni, Ray
2019-12-03 16:14 ` [PATCH 07/79] EmulatorPkg/Win: " Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 08/79] FatPkg/EnhancedFatDxe: " Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 09/79] FatPkg/FatPei: Fix few typos Philippe Mathieu-Daudé
2019-12-20 6:37 ` Ni, Ray
2019-12-03 16:14 ` [PATCH 10/79] IntelFsp2WrapperPkg: Fix various typos Philippe Mathieu-Daudé
2019-12-04 1:14 ` [edk2-devel] " Nate DeSimone
2019-12-04 1:22 ` Chiu, Chasel
2019-12-04 1:40 ` [edk2-devel] " Michael D Kinney
2019-12-04 2:30 ` Zeng, Star
2019-12-11 1:53 ` Chiu, Chasel
2019-12-03 16:14 ` [PATCH 11/79] MdeModulePkg/Application: Improve French translation Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 12/79] MdeModulePkg/Application: Fix various typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 13/79] MdeModulePkg/Bus/Ata: " Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 14/79] MdeModulePkg/Bus/I2c: Fix few typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 15/79] MdeModulePkg/Bus/Isa: Fix various typos Philippe Mathieu-Daudé
2019-12-03 16:14 ` [PATCH 16/79] MdeModulePkg/Bus/Scsi: " Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 17/79] MdeModulePkg/Bus/Sd: " Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 18/79] MdeModulePkg/Core/Pei: " Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 19/79] MdeModulePkg/Core/PiSmmCore: " Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 20/79] MdeModulePkg/UsbBusDxe: Fix a typo Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 21/79] MdeModulePkg/UsbMass: Fix various typos Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 22/79] MdeModulePkg/UsbMouse: Fix few typos Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 23/79] MdeModulePkg/UsbBus: Fix various typos Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 24/79] MdeModulePkg/Usb: " Philippe Mathieu-Daudé
2019-12-03 16:15 ` [PATCH 25/79] MdePkg/IndustryStandard: " Philippe Mathieu-Daudé
2019-12-04 1:35 ` Michael D Kinney
2019-12-03 16:15 ` [PATCH 26/79] MdePkg/Library/Dxe: " Philippe Mathieu-Daudé
2019-12-04 1:24 ` [edk2-devel] " Michael D Kinney
2019-12-03 16:15 ` [PATCH 27/79] MdePkg/Library/Pci: " Philippe Mathieu-Daudé
2019-12-04 1:25 ` [edk2-devel] " Michael D Kinney
2019-12-03 16:15 ` [PATCH 28/79] MdePkg/Library/Smm: " Philippe Mathieu-Daudé
2019-12-04 1:28 ` Michael D Kinney
2019-12-03 16:15 ` [PATCH 29/79] MdePkg/Ppi: " Philippe Mathieu-Daudé
2019-12-04 1:29 ` [edk2-devel] " Michael D Kinney
2019-12-03 16:15 ` [PATCH 30/79] MdePkg/Register: " Philippe Mathieu-Daudé
2019-12-04 1:30 ` [edk2-devel] " Michael D Kinney
2019-12-03 16:15 ` [PATCH 31/79] NetworkPkg: Fix a typo Philippe Mathieu-Daudé
2019-12-03 17:18 ` Leif Lindholm
2019-12-03 17:20 ` Philippe Mathieu-Daudé
2019-12-04 14:02 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 32/79] NetworkPkg/ArpDxe: Fix various typos Philippe Mathieu-Daudé
2019-12-04 13:20 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 33/79] NetworkPkg/Dhcp4Dxe: " Philippe Mathieu-Daudé
2019-12-04 13:25 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 34/79] NetworkPkg/Dhcp6Dxe: " Philippe Mathieu-Daudé
2019-12-04 13:28 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 35/79] NetworkPkg/DnsDxe: Fix a typo Philippe Mathieu-Daudé
2019-12-04 13:35 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 36/79] NetworkPkg/DnsDxe: Fix various typos Philippe Mathieu-Daudé
2019-12-04 13:36 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 37/79] NetworkPkg/DpcDxe: Fix few typos Philippe Mathieu-Daudé
2019-12-04 13:37 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 38/79] NetworkPkg/HttpBootDxe: Fix a typo in variable name Philippe Mathieu-Daudé
2019-12-04 13:52 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:15 ` [PATCH 39/79] NetworkPkg/HttpBootDxe: Fix various typos Philippe Mathieu-Daudé
2019-12-04 13:53 ` [edk2-devel] " Maciej Rabeda
2019-12-03 16:26 ` [PATCH 00/79] Fix a bunch of typos (part 1) Cœur
[not found] ` <20191203161602.15969-62-philmd@redhat.com>
2019-12-03 16:56 ` [PATCH 61/79] OvmfPkg/Xen: Fix various typos Anthony PERARD
2019-12-03 21:06 ` Laszlo Ersek
2019-12-04 3:39 ` Cœur
2019-12-04 16:07 ` [edk2-devel] " Michael D Kinney
2019-12-09 13:06 ` Philippe Mathieu-Daudé
2019-12-09 17:53 ` Michael D Kinney
[not found] ` <20191203161602.15969-76-philmd@redhat.com>
2019-12-03 19:44 ` [PATCH 75/79] StandaloneMmPkg: Fix a typo Yao, Jiewen
[not found] ` <20191203161602.15969-77-philmd@redhat.com>
2019-12-03 19:45 ` [PATCH 76/79] StandaloneMmPkg: Fix few typos Yao, Jiewen
[not found] ` <20191203161602.15969-57-philmd@redhat.com>
2019-12-03 20:48 ` [PATCH 56/79] OvmfPkg/Acpi: " Laszlo Ersek
[not found] ` <20191203161602.15969-58-philmd@redhat.com>
2019-12-03 20:50 ` [PATCH 57/79] OvmfPkg/Csm: Fix various typos Laszlo Ersek
2019-12-03 23:31 ` David Woodhouse
2019-12-04 14:07 ` [edk2-devel] " Philippe Mathieu-Daudé
[not found] ` <20191203161602.15969-59-philmd@redhat.com>
2019-12-03 21:00 ` [PATCH 58/79] OvmfPkg/Qemu: " Laszlo Ersek
2019-12-09 12:55 ` Philippe Mathieu-Daudé
2019-12-09 13:00 ` Philippe Mathieu-Daudé
2019-12-09 16:12 ` Laszlo Ersek
2019-12-09 15:44 ` Laszlo Ersek
[not found] ` <20191203161602.15969-60-philmd@redhat.com>
2019-12-03 21:00 ` [PATCH 59/79] OvmfPkg/Virtio: Fix few typos Laszlo Ersek
[not found] ` <20191203161602.15969-78-philmd@redhat.com>
2019-12-03 21:03 ` [PATCH 77/79] UefiCpuPkg/CpuDxe: " Laszlo Ersek
2019-12-06 7:24 ` Dong, Eric
[not found] ` <20191203161602.15969-79-philmd@redhat.com>
2019-12-03 21:04 ` [PATCH 78/79] UefiCpuPkg/PiSmm: Fix various typos Laszlo Ersek
2019-12-06 7:24 ` Dong, Eric
[not found] ` <20191203161602.15969-80-philmd@redhat.com>
2019-12-03 21:05 ` [PATCH 79/79] UefiCpuPkg/Smm: " Laszlo Ersek
2019-12-06 7:24 ` Dong, Eric
[not found] ` <20191203161602.15969-61-philmd@redhat.com>
2019-12-03 16:45 ` [PATCH 60/79] OvmfPkg/Xen: Fix a typo Anthony PERARD
2019-12-03 21:05 ` Laszlo Ersek
[not found] ` <20191203161602.15969-73-philmd@redhat.com>
2019-12-04 1:03 ` [PATCH 72/79] SourceLevelDebugPkg/DebugAgent: Fix various typos Wu, Hao A
[not found] ` <20191203161602.15969-74-philmd@redhat.com>
2019-12-04 1:03 ` [PATCH 73/79] SourceLevelDebugPkg/DebugCommunicationLib: " Wu, Hao A
[not found] ` <20191203161602.15969-75-philmd@redhat.com>
2019-12-04 1:03 ` [PATCH 74/79] SourceLevelDebugPkg: Fix few typos Wu, Hao A
2019-12-04 1:16 ` [edk2-devel] [PATCH 00/79] Fix a bunch of typos (part 1) Nate DeSimone
2019-12-04 1:27 ` Liming Gao
2019-12-04 9:09 ` Laszlo Ersek
2019-12-04 14:57 ` Maciej Rabeda
2019-12-04 16:29 ` Philippe Mathieu-Daudé
2019-12-04 16:44 ` Leif Lindholm
2019-12-04 22:15 ` Laszlo Ersek
2019-12-04 22:18 ` Philippe Mathieu-Daudé
[not found] ` <20191203161602.15969-56-philmd@redhat.com>
2019-12-06 16:01 ` [PATCH 55/79] NetworkPkg/VlanConfigDxe: Fix few typos Rabeda, Maciej
[not found] ` <20191203161602.15969-55-philmd@redhat.com>
2019-12-06 16:01 ` [PATCH 54/79] NetworkPkg/UefiPxeBcDxe: Fix various typos Rabeda, Maciej
[not found] ` <20191203161602.15969-52-philmd@redhat.com>
2019-12-06 16:01 ` [PATCH 51/79] NetworkPkg/Tls: Fix few typos Rabeda, Maciej
[not found] ` <20191203161602.15969-51-philmd@redhat.com>
2019-12-06 16:02 ` [PATCH 50/79] NetworkPkg/TcpDxe/Tcp: Fix various typos Rabeda, Maciej
[not found] ` <20191203161602.15969-47-philmd@redhat.com>
2019-12-06 16:02 ` [PATCH 46/79] NetworkPkg/Mtftp4Dxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-53-philmd@redhat.com>
2019-12-06 16:02 ` [PATCH 52/79] NetworkPkg/Udp4Dxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-54-philmd@redhat.com>
2019-12-06 16:03 ` [PATCH 53/79] NetworkPkg/Udp6Dxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-43-philmd@redhat.com>
2019-12-06 16:03 ` [PATCH 42/79] NetworkPkg/Ip6Dxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-45-philmd@redhat.com>
2019-12-06 16:04 ` [PATCH 44/79] NetworkPkg/Library: " Rabeda, Maciej
[not found] ` <20191203161602.15969-42-philmd@redhat.com>
2019-12-06 16:04 ` [PATCH 41/79] NetworkPkg/Ip4Dxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-50-philmd@redhat.com>
2019-12-06 16:04 ` [PATCH 49/79] NetworkPkg/TcpDxe/Sock: Fix few typos Rabeda, Maciej
[not found] ` <20191203161602.15969-48-philmd@redhat.com>
2019-12-06 16:05 ` [PATCH 47/79] NetworkPkg/Mtftp6Dxe: Fix various typos Rabeda, Maciej
[not found] ` <20191203161602.15969-46-philmd@redhat.com>
2019-12-06 16:05 ` [PATCH 45/79] NetworkPkg/MnpDxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-41-philmd@redhat.com>
2019-12-06 16:05 ` [PATCH 40/79] NetworkPkg/HttpDxe: " Rabeda, Maciej
[not found] ` <20191203161602.15969-49-philmd@redhat.com>
2019-12-06 16:09 ` [PATCH 48/79] NetworkPkg/SnpDxe: Fix few typos Rabeda, Maciej
2019-12-06 16:38 ` Philippe Mathieu-Daudé
2019-12-10 7:21 ` [PATCH 00/79] Fix a bunch of typos (part 1) Cœur
[not found] ` <20191203161602.15969-70-philmd@redhat.com>
2019-12-13 2:33 ` [PATCH 69/79] ShellPkg/DynamicCommand: Fix various typos Gao, Zhichao
[not found] ` <20191203161602.15969-69-philmd@redhat.com>
2019-12-13 2:33 ` Gao, Zhichao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CE959C139B4C44DBEA1810E3AA6F9000B893AA3@SHSMSX101.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox