From: "Bandaru, Purna Chandra Rao" <purna.chandra.rao.bandaru@intel.com>
To: devel@edk2.groups.io
Cc: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>,
Wu Hao A <hao.a.wu@intel.com>,
Albecki Mateusz <mateusz.albecki@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Zhiguang Liu <zhiguang.liu@intel.com>
Subject: [PATCH] [PATCH v3] MdeModulePkg: Add bRefClkFreq card attribute programming support
Date: Tue, 8 Mar 2022 17:49:35 +0530 [thread overview]
Message-ID: <4014f68bb8428892e14f15efe152805f95d9b829.1646741878.git.purna.chandra.rao.bandaru@intel.com> (raw)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3851
When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the Manufacturer Default Value
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to the correct value.
Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved
Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
---
.../Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 70 ++++++++++++++++---
.../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 10 +--
.../Protocol/UfsHostControllerPlatform.h | 15 +++-
3 files changed, 74 insertions(+), 21 deletions(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
index 4c2d6ae27f..dc78e09678 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
@@ -1,6 +1,6 @@
/** @file
- Copyright (c) 2014 - 2021, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2022, Intel Corporation. All rights reserved.<BR>
Copyright (c) Microsoft Corporation.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -834,15 +834,17 @@ UfsPassThruDriverBindingStart (
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
- EFI_STATUS Status;
- EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
- UFS_PASS_THRU_PRIVATE_DATA *Private;
- UINTN UfsHcBase;
- UINT32 Index;
- UFS_UNIT_DESC UnitDescriptor;
- UFS_DEV_DESC DeviceDescriptor;
- UINT32 UnitDescriptorSize;
- UINT32 DeviceDescriptorSize;
+ EFI_STATUS Status;
+ EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ UINTN UfsHcBase;
+ UINT32 Index;
+ UFS_UNIT_DESC UnitDescriptor;
+ UFS_DEV_DESC DeviceDescriptor;
+ UINT32 UnitDescriptorSize;
+ UINT32 DeviceDescriptorSize;
+ EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE Attributes;
+ UINT8 RefClkAttr;
Status = EFI_SUCCESS;
UfsHc = NULL;
@@ -917,6 +919,54 @@ UfsPassThruDriverBindingStart (
goto Error;
}
+ if ((mUfsHcPlatform != NULL) &&
+ ((mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq19p2Mhz) ||
+ (mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq26Mhz) ||
+ (mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq38p4Mhz)))
+ {
+ RefClkAttr = UfsAttrRefClkFreq;
+ Attributes = EdkiiUfsCardRefClkFreqObsolete;
+ Status = UfsRwAttributes (Private, TRUE, RefClkAttr, 0, 0, (UINT32 *)&Attributes);
+ if (!EFI_ERROR (Status)) {
+ if (Attributes != mUfsHcPlatform->RefClkFreq) {
+ Attributes = mUfsHcPlatform->RefClkFreq;
+ DEBUG (
+ (DEBUG_INFO,
+ "Setting bRefClkFreq attribute(%x) to %x\n 0 -> 19.2 Mhz\n 1 -> 26 Mhz\n 2 -> 38.4 Mhz\n 3 -> Obsolete\n",
+ RefClkAttr,
+ Attributes)
+ );
+ Status = UfsRwAttributes (Private, FALSE, RefClkAttr, 0, 0, (UINT32 *)&Attributes);
+ if (EFI_ERROR (Status)) {
+ DEBUG (
+ (DEBUG_ERROR,
+ "Failed to Change Reference Clock Attribute to %d, Status = %r \n",
+ mUfsHcPlatform->RefClkFreq,
+ Status)
+ );
+ }
+ }
+ } else {
+ DEBUG (
+ (DEBUG_ERROR,
+ "Failed to Read Reference Clock Attribute, Status = %r \n",
+ Status)
+ );
+ }
+ }
+
+ if ((mUfsHcPlatform != NULL) && (mUfsHcPlatform->Callback != NULL)) {
+ Status = mUfsHcPlatform->Callback (Private->Handle, EdkiiUfsHcPostLinkStartup, &Private->UfsHcDriverInterface);
+ if (EFI_ERROR (Status)) {
+ DEBUG (
+ (DEBUG_ERROR,
+ "Failure from platform driver during EdkiiUfsHcPostLinkStartup, Status = %r\n",
+ Status)
+ );
+ return Status;
+ }
+ }
+
//
// UFS 2.0 spec Section 13.1.3.3:
// At the end of the UFS Interconnect Layer initialization on both host and device side,
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
index eba35cc669..4a9fa01e7d 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
@@ -2,7 +2,7 @@
UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
for upper layer application to execute UFS-supported SCSI cmds.
- Copyright (c) 2014 - 2019, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2022, Intel Corporation. All rights reserved.<BR>
Copyright (c) Microsoft Corporation.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -1970,14 +1970,6 @@ UfsDeviceDetection (
return EFI_DEVICE_ERROR;
}
} else {
- if ((mUfsHcPlatform != NULL) && (mUfsHcPlatform->Callback != NULL)) {
- Status = mUfsHcPlatform->Callback (Private->Handle, EdkiiUfsHcPostLinkStartup, &Private->UfsHcDriverInterface);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Failure from platform driver during EdkiiUfsHcPostLinkStartup, Status = %r\n", Status));
- return Status;
- }
- }
-
return EFI_SUCCESS;
}
}
diff --git a/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h b/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
index faa82d0c4e..32e9f6488c 100644
--- a/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
+++ b/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
@@ -1,7 +1,7 @@
/** @file
EDKII_UFS_HC_PLATFORM_PROTOCOL definition.
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2019 - 2022, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -11,7 +11,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/UfsHostController.h>
-#define EDKII_UFS_HC_PLATFORM_PROTOCOL_VERSION 1
+#define EDKII_UFS_HC_PLATFORM_PROTOCOL_VERSION 2
extern EFI_GUID gEdkiiUfsHcPlatformProtocolGuid;
@@ -83,6 +83,13 @@ typedef enum {
EdkiiUfsHcPostLinkStartup
} EDKII_UFS_HC_PLATFORM_CALLBACK_PHASE;
+typedef enum {
+ EdkiiUfsCardRefClkFreq19p2Mhz,
+ EdkiiUfsCardRefClkFreq26Mhz,
+ EdkiiUfsCardRefClkFreq38p4Mhz,
+ EdkiiUfsCardRefClkFreqObsolete
+} EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE;
+
/**
Callback function for platform driver.
@@ -118,6 +125,10 @@ struct _EDKII_UFS_HC_PLATFORM_PROTOCOL {
/// for host controller.
///
EDKII_UFS_HC_PLATFORM_CALLBACK Callback;
+ ///
+ /// Reference Clock Frequency Ufs Card Attribute that need to be set in this Ufs Host Environment.
+ ///
+ EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE RefClkFreq;
};
#endif
--
2.31.1.windows.1
next reply other threads:[~2022-03-08 12:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 12:19 Bandaru, Purna Chandra Rao [this message]
2022-03-09 1:13 ` [PATCH] [PATCH v3] MdeModulePkg: Add bRefClkFreq card attribute programming support Wu, Hao A
2022-03-10 2:15 ` [edk2-devel] " Wu, Hao A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4014f68bb8428892e14f15efe152805f95d9b829.1646741878.git.purna.chandra.rao.bandaru@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox