From: Paulo Alcantara <pcacjr@zytor.com>
To: edk2-devel@lists.01.org
Cc: Paulo Alcantara <pcacjr@zytor.com>,
Michael D Kinney <michael.d.kinney@intel.com>,
Liming Gao <liming.gao@intel.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH v5 1/6] MdePkg: Add UDF volume structure definitions
Date: Thu, 7 Sep 2017 20:13:20 -0300 [thread overview]
Message-ID: <407d470cc389b073c693c4c716a893dc75ac82c7.1504825081.git.pcacjr@zytor.com> (raw)
In-Reply-To: <cover.1504825081.git.pcacjr@zytor.com>
In-Reply-To: <cover.1504825081.git.pcacjr@zytor.com>
This patch adds basic volume structure definitions necessary to identify
a valid UDF file system on a block device, as specified by OSTA
Universal Disk Format Specification 2.60.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
---
MdePkg/Include/IndustryStandard/Udf.h | 60 +++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 MdePkg/Include/IndustryStandard/Udf.h
diff --git a/MdePkg/Include/IndustryStandard/Udf.h b/MdePkg/Include/IndustryStandard/Udf.h
new file mode 100644
index 0000000000..0febb4bcda
--- /dev/null
+++ b/MdePkg/Include/IndustryStandard/Udf.h
@@ -0,0 +1,60 @@
+/** @file
+ OSTA Universal Disk Format (UDF) definitions.
+
+ Copyright (C) 2014-2017 Paulo Alcantara <pcacjr@zytor.com>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#ifndef __UDF_H__
+#define __UDF_H__
+
+#define UDF_BEA_IDENTIFIER "BEA01"
+#define UDF_NSR2_IDENTIFIER "NSR02"
+#define UDF_NSR3_IDENTIFIER "NSR03"
+#define UDF_TEA_IDENTIFIER "TEA01"
+
+#define UDF_LOGICAL_SECTOR_SHIFT 11
+#define UDF_LOGICAL_SECTOR_SIZE ((UINT64)(1ULL << UDF_LOGICAL_SECTOR_SHIFT))
+#define UDF_VRS_START_OFFSET ((UINT64)(16ULL << UDF_LOGICAL_SECTOR_SHIFT))
+
+#define _GET_TAG_ID(_Pointer) \
+ (((UDF_DESCRIPTOR_TAG *)(_Pointer))->TagIdentifier)
+
+#define IS_AVDP(_Pointer) \
+ ((BOOLEAN)(_GET_TAG_ID (_Pointer) == 2))
+
+#pragma pack(1)
+
+typedef struct {
+ UINT16 TagIdentifier;
+ UINT16 DescriptorVersion;
+ UINT8 TagChecksum;
+ UINT8 Reserved;
+ UINT16 TagSerialNumber;
+ UINT16 DescriptorCRC;
+ UINT16 DescriptorCRCLength;
+ UINT32 TagLocation;
+} UDF_DESCRIPTOR_TAG;
+
+typedef struct {
+ UINT32 ExtentLength;
+ UINT32 ExtentLocation;
+} UDF_EXTENT_AD;
+
+typedef struct {
+ UDF_DESCRIPTOR_TAG DescriptorTag;
+ UDF_EXTENT_AD MainVolumeDescriptorSequenceExtent;
+ UDF_EXTENT_AD ReserveVolumeDescriptorSequenceExtent;
+ UINT8 Reserved[480];
+} UDF_ANCHOR_VOLUME_DESCRIPTOR_POINTER;
+
+#pragma pack()
+
+#endif
--
2.11.0
next prev parent reply other threads:[~2017-09-07 23:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-07 23:13 [PATCH v5 0/6] read-only UDF file system support Paulo Alcantara
2017-09-07 23:13 ` Paulo Alcantara [this message]
2017-09-07 23:13 ` [PATCH v5 2/6] MdeModulePkg/PartitionDxe: Add " Paulo Alcantara
2017-09-07 23:13 ` [PATCH v5 3/6] MdeModulePkg: Initial UDF/ECMA-167 " Paulo Alcantara
2017-09-07 23:13 ` [PATCH v5 4/6] OvmfPkg: Enable UDF " Paulo Alcantara
2017-09-07 23:13 ` [PATCH v5 5/6] ArmVirtPkg: " Paulo Alcantara
2017-09-07 23:13 ` [PATCH v5 6/6] Nt32Pkg: " Paulo Alcantara
2017-09-08 2:24 ` Ni, Ruiyu
2017-09-08 0:56 ` [PATCH v5 0/6] read-only " Paulo Alcantara
2017-09-08 2:41 ` Ni, Ruiyu
2017-09-08 3:35 ` Paulo Alcantara
2017-09-08 6:25 ` Ni, Ruiyu
2017-09-08 8:35 ` Laszlo Ersek
2017-09-08 11:46 ` Paulo Alcantara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=407d470cc389b073c693c4c716a893dc75ac82c7.1504825081.git.pcacjr@zytor.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox