* [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
@ 2016-10-18 11:24 Giri P Mudusuru
2016-10-18 13:30 ` Yao, Jiewen
0 siblings, 1 reply; 4+ messages in thread
From: Giri P Mudusuru @ 2016-10-18 11:24 UTC (permalink / raw)
To: edk2-devel; +Cc: Michael Kinney, Liming Gao, Jiewen Yao
ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_Table.pdf
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
---
.../Include/IndustryStandard/LowPowerIdleTable.h | 82 ++++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
new file mode 100644
index 0000000..b29db04
--- /dev/null
+++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
@@ -0,0 +1,82 @@
+/** @file
+ ACPI Low Power Idle Table (LPIT) definitions
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
+ http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_Table.pdf
+
+ @par Glossary:
+ - GAS - Generic Address Structure
+ - LPI - Low Power Idle
+**/
+#ifndef _LOW_POWER_IDLE_TABLE_H_
+#define _LOW_POWER_IDLE_TABLE_H_
+
+#include <IndustryStandard/Acpi61.h>
+
+#pragma pack(1)
+
+///
+/// LPI Structure Types
+///
+#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE 0x00
+
+///
+/// Low Power Idle (LPI) State Flags
+///
+typedef union {
+ struct {
+ UINT32 Disabled : 1; ///< If set, LPI state is not used
+ /**
+ If set, Residency counter is not available for this LPI state and
+ Residency Counter Frequency is invalid
+ **/
+ UINT32 CounterUnavailable : 1;
+ UINT32 Reserved : 30; ///< Reserved for future use. Must be zero
+ } Bits;
+ UINT32 Data32;
+} ACPI_LPI_STATE_FLAGS;
+
+///
+/// Low Power Idle (LPI) structure with Native C-state instruction entry trigger descriptor
+///
+typedef struct {
+ UINT32 Type; ///< LPI State descriptor Type 0
+ UINT32 Length; ///< Length of LPI state Descriptor Structure
+ ///
+ /// Unique LPI state identifier: zero based, monotonically increasing identifier
+ ///
+ UINT16 UniqueId;
+ UINT8 Reserved[2]; ///< Must be Zero
+ ACPI_LPI_STATE_FLAGS Flags; ///< LPI state flags
+ /**
+ The LPI entry trigger, matching an existing _CST.Register object, represented as a
+ Generic Address Structure. All processors must request this state or deeper to trigger.
+ **/
+ EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE EntryTrigger;
+ UINT32 Residency; ///< Minimum residency or break-even in uSec
+ UINT32 Latency; ///< Worst case exit latency in uSec
+ /**
+ [optional] Residency counter, represented as a Generic Address Structure.
+ If not present, Flags[1] bit should be set.
+ **/
+ EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE ResidencyCounter;
+ /**
+ [optional] Residency counter frequency in cycles per second. Value 0 indicates that
+ counter runs at TSC frequency. Valid only if Residency Counter is present.
+ **/
+ UINT64 ResidencyCounterFrequency;
+} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
+
+#pragma pack()
+
+#endif
--
2.9.0.windows.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
2016-10-18 11:24 [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions Giri P Mudusuru
@ 2016-10-18 13:30 ` Yao, Jiewen
2016-10-18 13:55 ` Mudusuru, Giri P
0 siblings, 1 reply; 4+ messages in thread
From: Yao, Jiewen @ 2016-10-18 13:30 UTC (permalink / raw)
To: Mudusuru, Giri P, edk2-devel@lists.01.org; +Cc: Kinney, Michael D, Gao, Liming
HI
I recommend we just use #include <IndustryStandard/Acpi.h>.
Acpi.h includes all ACPI version. There is no need to include Acpi61.h.
With this change, reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Giri P Mudusuru
> Sent: Tuesday, October 18, 2016 7:25 PM
> To: edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> <jiewen.yao@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> definitions
>
> ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> able.pdf
>
> Cc: Michael Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> ---
> .../Include/IndustryStandard/LowPowerIdleTable.h | 82
> ++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644
> MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
>
> diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> new file mode 100644
> index 0000000..b29db04
> --- /dev/null
> +++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> @@ -0,0 +1,82 @@
> +/** @file
> + ACPI Low Power Idle Table (LPIT) definitions
> +
> + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the
> BSD License
> + which accompanies this distribution. The full text of the license may be
> found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> + @par Revision Reference:
> + - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> +
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> able.pdf
> +
> + @par Glossary:
> + - GAS - Generic Address Structure
> + - LPI - Low Power Idle
> +**/
> +#ifndef _LOW_POWER_IDLE_TABLE_H_
> +#define _LOW_POWER_IDLE_TABLE_H_
> +
> +#include <IndustryStandard/Acpi61.h>
> +
> +#pragma pack(1)
> +
> +///
> +/// LPI Structure Types
> +///
> +#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE 0x00
> +
> +///
> +/// Low Power Idle (LPI) State Flags
> +///
> +typedef union {
> + struct {
> + UINT32 Disabled : 1; ///< If set, LPI state is not used
> + /**
> + If set, Residency counter is not available for this LPI state and
> + Residency Counter Frequency is invalid
> + **/
> + UINT32 CounterUnavailable : 1;
> + UINT32 Reserved : 30; ///< Reserved for future use. Must
> be zero
> + } Bits;
> + UINT32 Data32;
> +} ACPI_LPI_STATE_FLAGS;
> +
> +///
> +/// Low Power Idle (LPI) structure with Native C-state instruction entry
> trigger descriptor
> +///
> +typedef struct {
> + UINT32 Type; ///< LPI State
> descriptor Type 0
> + UINT32 Length; ///< Length of
> LPI state Descriptor Structure
> + ///
> + /// Unique LPI state identifier: zero based, monotonically increasing
> identifier
> + ///
> + UINT16 UniqueId;
> + UINT8 Reserved[2]; ///<
> Must be Zero
> + ACPI_LPI_STATE_FLAGS Flags; ///< LPI
> state flags
> + /**
> + The LPI entry trigger, matching an existing _CST.Register object,
> represented as a
> + Generic Address Structure. All processors must request this state or
> deeper to trigger.
> + **/
> + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE EntryTrigger;
> + UINT32 Residency; ///<
> Minimum residency or break-even in uSec
> + UINT32 Latency; ///<
> Worst case exit latency in uSec
> + /**
> + [optional] Residency counter, represented as a Generic Address
> Structure.
> + If not present, Flags[1] bit should be set.
> + **/
> + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE ResidencyCounter;
> + /**
> + [optional] Residency counter frequency in cycles per second. Value 0
> indicates that
> + counter runs at TSC frequency. Valid only if Residency Counter is
> present.
> + **/
> + UINT64
> ResidencyCounterFrequency;
> +} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
> +
> +#pragma pack()
> +
> +#endif
> --
> 2.9.0.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
2016-10-18 13:30 ` Yao, Jiewen
@ 2016-10-18 13:55 ` Mudusuru, Giri P
2016-10-20 5:10 ` Gao, Liming
0 siblings, 1 reply; 4+ messages in thread
From: Mudusuru, Giri P @ 2016-10-18 13:55 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org; +Cc: Kinney, Michael D, Gao, Liming
Agree Jiewen will update it before pushing the patch.
Thanks,
-Giri
> -----Original Message-----
> From: Yao, Jiewen
> Sent: Tuesday, October 18, 2016 6:30 AM
> To: Mudusuru, Giri P <giri.p.mudusuru@intel.com>; edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: RE: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> definitions
>
> HI
> I recommend we just use #include <IndustryStandard/Acpi.h>.
> Acpi.h includes all ACPI version. There is no need to include Acpi61.h.
>
> With this change, reviewed-by: Jiewen.yao@intel.com
>
>
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > Giri P Mudusuru
> > Sent: Tuesday, October 18, 2016 7:25 PM
> > To: edk2-devel@lists.01.org
> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> > <jiewen.yao@intel.com>; Gao, Liming <liming.gao@intel.com>
> > Subject: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> > definitions
> >
> > ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > able.pdf
> >
> > Cc: Michael Kinney <michael.d.kinney@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> > ---
> > .../Include/IndustryStandard/LowPowerIdleTable.h | 82
> > ++++++++++++++++++++++
> > 1 file changed, 82 insertions(+)
> > create mode 100644
> > MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> >
> > diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > new file mode 100644
> > index 0000000..b29db04
> > --- /dev/null
> > +++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > @@ -0,0 +1,82 @@
> > +/** @file
> > + ACPI Low Power Idle Table (LPIT) definitions
> > +
> > + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> > + This program and the accompanying materials
> > + are licensed and made available under the terms and conditions of the
> > BSD License
> > + which accompanies this distribution. The full text of the license may be
> > found at
> > + http://opensource.org/licenses/bsd-license.php
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > EXPRESS OR IMPLIED.
> > +
> > + @par Revision Reference:
> > + - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > +
> > http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > able.pdf
> > +
> > + @par Glossary:
> > + - GAS - Generic Address Structure
> > + - LPI - Low Power Idle
> > +**/
> > +#ifndef _LOW_POWER_IDLE_TABLE_H_
> > +#define _LOW_POWER_IDLE_TABLE_H_
> > +
> > +#include <IndustryStandard/Acpi61.h>
> > +
> > +#pragma pack(1)
> > +
> > +///
> > +/// LPI Structure Types
> > +///
> > +#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE 0x00
> > +
> > +///
> > +/// Low Power Idle (LPI) State Flags
> > +///
> > +typedef union {
> > + struct {
> > + UINT32 Disabled : 1; ///< If set, LPI state is not used
> > + /**
> > + If set, Residency counter is not available for this LPI state and
> > + Residency Counter Frequency is invalid
> > + **/
> > + UINT32 CounterUnavailable : 1;
> > + UINT32 Reserved : 30; ///< Reserved for future use. Must
> > be zero
> > + } Bits;
> > + UINT32 Data32;
> > +} ACPI_LPI_STATE_FLAGS;
> > +
> > +///
> > +/// Low Power Idle (LPI) structure with Native C-state instruction entry
> > trigger descriptor
> > +///
> > +typedef struct {
> > + UINT32 Type; ///< LPI State
> > descriptor Type 0
> > + UINT32 Length; ///< Length of
> > LPI state Descriptor Structure
> > + ///
> > + /// Unique LPI state identifier: zero based, monotonically increasing
> > identifier
> > + ///
> > + UINT16 UniqueId;
> > + UINT8 Reserved[2]; ///<
> > Must be Zero
> > + ACPI_LPI_STATE_FLAGS Flags; ///< LPI
> > state flags
> > + /**
> > + The LPI entry trigger, matching an existing _CST.Register object,
> > represented as a
> > + Generic Address Structure. All processors must request this state or
> > deeper to trigger.
> > + **/
> > + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE EntryTrigger;
> > + UINT32 Residency; ///<
> > Minimum residency or break-even in uSec
> > + UINT32 Latency; ///<
> > Worst case exit latency in uSec
> > + /**
> > + [optional] Residency counter, represented as a Generic Address
> > Structure.
> > + If not present, Flags[1] bit should be set.
> > + **/
> > + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE ResidencyCounter;
> > + /**
> > + [optional] Residency counter frequency in cycles per second. Value 0
> > indicates that
> > + counter runs at TSC frequency. Valid only if Residency Counter is
> > present.
> > + **/
> > + UINT64
> > ResidencyCounterFrequency;
> > +} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
> > +
> > +#pragma pack()
> > +
> > +#endif
> > --
> > 2.9.0.windows.1
> >
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
2016-10-18 13:55 ` Mudusuru, Giri P
@ 2016-10-20 5:10 ` Gao, Liming
0 siblings, 0 replies; 4+ messages in thread
From: Gao, Liming @ 2016-10-20 5:10 UTC (permalink / raw)
To: Mudusuru, Giri P, Yao, Jiewen, edk2-devel@lists.01.org; +Cc: Kinney, Michael D
Reviewed-by: Liming Gao <liming.gao@intel.com>
> -----Original Message-----
> From: Mudusuru, Giri P
> Sent: Tuesday, October 18, 2016 9:56 PM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: RE: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> definitions
>
> Agree Jiewen will update it before pushing the patch.
>
> Thanks,
> -Giri
>
> > -----Original Message-----
> > From: Yao, Jiewen
> > Sent: Tuesday, October 18, 2016 6:30 AM
> > To: Mudusuru, Giri P <giri.p.mudusuru@intel.com>; edk2-
> devel@lists.01.org
> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> > <liming.gao@intel.com>
> > Subject: RE: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> > definitions
> >
> > HI
> > I recommend we just use #include <IndustryStandard/Acpi.h>.
> > Acpi.h includes all ACPI version. There is no need to include Acpi61.h.
> >
> > With this change, reviewed-by: Jiewen.yao@intel.com
> >
> >
> > > -----Original Message-----
> > > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > > Giri P Mudusuru
> > > Sent: Tuesday, October 18, 2016 7:25 PM
> > > To: edk2-devel@lists.01.org
> > > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> > > <jiewen.yao@intel.com>; Gao, Liming <liming.gao@intel.com>
> > > Subject: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> > > definitions
> > >
> > > ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > >
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > > able.pdf
> > >
> > > Cc: Michael Kinney <michael.d.kinney@intel.com>
> > > Cc: Liming Gao <liming.gao@intel.com>
> > > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > > Contributed-under: TianoCore Contribution Agreement 1.0
> > > Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> > > ---
> > > .../Include/IndustryStandard/LowPowerIdleTable.h | 82
> > > ++++++++++++++++++++++
> > > 1 file changed, 82 insertions(+)
> > > create mode 100644
> > > MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > >
> > > diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > new file mode 100644
> > > index 0000000..b29db04
> > > --- /dev/null
> > > +++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > @@ -0,0 +1,82 @@
> > > +/** @file
> > > + ACPI Low Power Idle Table (LPIT) definitions
> > > +
> > > + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> > > + This program and the accompanying materials
> > > + are licensed and made available under the terms and conditions of the
> > > BSD License
> > > + which accompanies this distribution. The full text of the license may be
> > > found at
> > > + http://opensource.org/licenses/bsd-license.php
> > > +
> > > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > > BASIS,
> > > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +
> > > + @par Revision Reference:
> > > + - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > > +
> > >
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > > able.pdf
> > > +
> > > + @par Glossary:
> > > + - GAS - Generic Address Structure
> > > + - LPI - Low Power Idle
> > > +**/
> > > +#ifndef _LOW_POWER_IDLE_TABLE_H_
> > > +#define _LOW_POWER_IDLE_TABLE_H_
> > > +
> > > +#include <IndustryStandard/Acpi61.h>
> > > +
> > > +#pragma pack(1)
> > > +
> > > +///
> > > +/// LPI Structure Types
> > > +///
> > > +#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE 0x00
> > > +
> > > +///
> > > +/// Low Power Idle (LPI) State Flags
> > > +///
> > > +typedef union {
> > > + struct {
> > > + UINT32 Disabled : 1; ///< If set, LPI state is not used
> > > + /**
> > > + If set, Residency counter is not available for this LPI state and
> > > + Residency Counter Frequency is invalid
> > > + **/
> > > + UINT32 CounterUnavailable : 1;
> > > + UINT32 Reserved : 30; ///< Reserved for future use. Must
> > > be zero
> > > + } Bits;
> > > + UINT32 Data32;
> > > +} ACPI_LPI_STATE_FLAGS;
> > > +
> > > +///
> > > +/// Low Power Idle (LPI) structure with Native C-state instruction entry
> > > trigger descriptor
> > > +///
> > > +typedef struct {
> > > + UINT32 Type; ///< LPI State
> > > descriptor Type 0
> > > + UINT32 Length; ///< Length of
> > > LPI state Descriptor Structure
> > > + ///
> > > + /// Unique LPI state identifier: zero based, monotonically increasing
> > > identifier
> > > + ///
> > > + UINT16 UniqueId;
> > > + UINT8 Reserved[2]; ///<
> > > Must be Zero
> > > + ACPI_LPI_STATE_FLAGS Flags; ///< LPI
> > > state flags
> > > + /**
> > > + The LPI entry trigger, matching an existing _CST.Register object,
> > > represented as a
> > > + Generic Address Structure. All processors must request this state or
> > > deeper to trigger.
> > > + **/
> > > + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE EntryTrigger;
> > > + UINT32 Residency; ///<
> > > Minimum residency or break-even in uSec
> > > + UINT32 Latency; ///<
> > > Worst case exit latency in uSec
> > > + /**
> > > + [optional] Residency counter, represented as a Generic Address
> > > Structure.
> > > + If not present, Flags[1] bit should be set.
> > > + **/
> > > + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE ResidencyCounter;
> > > + /**
> > > + [optional] Residency counter frequency in cycles per second. Value 0
> > > indicates that
> > > + counter runs at TSC frequency. Valid only if Residency Counter is
> > > present.
> > > + **/
> > > + UINT64
> > > ResidencyCounterFrequency;
> > > +} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
> > > +
> > > +#pragma pack()
> > > +
> > > +#endif
> > > --
> > > 2.9.0.windows.1
> > >
> > > _______________________________________________
> > > edk2-devel mailing list
> > > edk2-devel@lists.01.org
> > > https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-20 5:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-18 11:24 [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions Giri P Mudusuru
2016-10-18 13:30 ` Yao, Jiewen
2016-10-18 13:55 ` Mudusuru, Giri P
2016-10-20 5:10 ` Gao, Liming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox