From: "Kubacki, Michael A" <michael.a.kubacki@intel.com>
To: "Wei, David Y" <david.y.wei@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
"Sinha, Ankit" <ankit.sinha@intel.com>,
"Agyeman, Prince" <prince.agyeman@intel.com>,
"Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for SimicsX58
Date: Mon, 26 Aug 2019 22:48:48 +0000 [thread overview]
Message-ID: <49AB4ACB9627B8468F29D589A27B745588A89908@ORSMSX121.amr.corp.intel.com> (raw)
In-Reply-To: <BB06729C0DFAF049B2572591F2D0B0F5095D9709@fmsmsx121.amr.corp.intel.com>
Thanks David. No more comments for this patch.
> -----Original Message-----
> From: Wei, David Y
> Sent: Thursday, August 22, 2019 3:31 PM
> To: Kubacki, Michael A <michael.a.kubacki@intel.com>; devel@edk2.groups.io
> Cc: Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>;
> Sinha, Ankit <ankit.sinha@intel.com>; Agyeman, Prince
> <prince.agyeman@intel.com>; Desimone, Nathaniel L
> <nathaniel.l.desimone@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for
> SimicsX58
>
> Hi Mike,
> Please see the updates online below. Please let me know if you have any more
> comments.
>
> Thanks
> David
>
> -----Original Message-----
> From: Kubacki, Michael A
> Sent: Monday, August 19, 2019 6:04 PM
> To: Wei, David Y <david.y.wei@intel.com>; devel@edk2.groups.io
> Cc: Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>;
> Sinha, Ankit <ankit.sinha@intel.com>; Agyeman, Prince
> <prince.agyeman@intel.com>; Desimone, Nathaniel L
> <nathaniel.l.desimone@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for
> SimicsX58
>
> Feedback I could not find already noted elsewhere:
>
> 1. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c:
> There's some style issues throughout the file related to a missing space
> before opening parenthesis and parameters than span multiple lines.
> Some of these are pre-existing in OvmfPkg source. I don't think this is a
> must have.
> Ydwei: done
> 2. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c - Line 265:
> "Confirm if QEMU supports SMRAM." to "Confirm if Simics supports
> SMRAM."
> Ydwei: done
> 3. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c - Line 275:
> "DEBUG((EFI_D_ERROR, "TopOfLowRam =0x%x; TopOfLowRamMb =0x%x
> \n", TopOfLowRam, TopOfLowRamMb));"
> Should be an informational message.
> Ydwei: done
> 3. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c - Line 283:
> "DEBUG((EFI_D_ERROR, "MCH_TOLUD =0x%x; \n",
> PciRead32(DRAMC_REGISTER_X58(MCH_TOLUD))));"
> Should be an informational message.
> Ydwei: done
> 4. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c - Line 300 &
> Line 301 - Should be informational messages as well.
> Ydwei: done
> 5. Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf: Is a
> dependency on OvmfPkg/OvmfPkg.dec required? This dependency should be
> avoided.
> Ydwei: done
> 6. Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore: I don't think
> this should be an override but should exist in a similar manner
> as edk2/OvmfPkg/Sec. The code cannot be upstreamed as-is.
> Ydwei: done
> 7. /Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c:
> Some of this messages should probably be verbose not informational.
> Ydwei: done
> 8. /Silicon/Intel/SimicsX58SktPkg/SktPei.dsc: This file naming convention is
> unusual. SktPkgPei.dsc is more consistent.
> Ydwei: done
> > -----Original Message-----
> > From: Wei, David Y
> > Sent: Friday, August 9, 2019 3:47 PM
> > To: devel@edk2.groups.io
> > Cc: Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>;
> > Sinha, Ankit <ankit.sinha@intel.com>; Agyeman, Prince
> > <prince.agyeman@intel.com>; Kubacki, Michael A
> > <michael.a.kubacki@intel.com>; Desimone, Nathaniel L
> > <nathaniel.l.desimone@intel.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>
> > Subject: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for
> > SimicsX58
> >
> > Add CPU Pkg for SimicsX58. It is added for simics QSP project support
> >
> > Cc: Hao Wu <hao.a.wu@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Cc: Ankit Sinha <ankit.sinha@intel.com>
> > Cc: Agyeman Prince <prince.agyeman@intel.com>
> > Cc: Kubacki Michael A <michael.a.kubacki@intel.com>
> > Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.0
> >
> > Signed-off-by: David Wei <david.y.wei@intel.com>
> > ---
> > .../Override/UefiCpuPkg/SecCore/SecMain.c | 956
> > +++++++++++++++++++++
> > .../SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c | 148 ++++
> > .../SimicsX58SktPkg/Smm/Access/SmmAccessPei.c | 353 ++++++++
> > .../SimicsX58SktPkg/Smm/Access/SmramInternal.c | 199 +++++
> > .../Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm | 45 +
> > .../Override/UefiCpuPkg/SecCore/SecMain.inf | 71 ++
> > .../Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm | 45 +
> > Silicon/Intel/SimicsX58SktPkg/SktPei.dsc | 18 +
> > .../Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf | 9 +
> > .../Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf | 10 +
> > Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf | 17 +
> > .../Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf | 16 +
> > .../SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf | 52 ++
> > .../SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf | 64 ++
> > .../SimicsX58SktPkg/Smm/Access/SmramInternal.h | 81 ++
> > 15 files changed, 2084 insertions(+)
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
> > create mode 100644
> >
> Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry.n
> as
> > m
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
> > create mode 100644
> >
> Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.n
> as
> > m
> > create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
> > create mode 100644
> Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
> > create mode 100644
> Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
> > create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
> > create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
> > create mode 100644
> > Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
> >
> > diff --git
> > a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
> > b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
> > new file mode 100644
> > index 0000000000..c52d459ef2
> > --- /dev/null
> > +++
> b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
> > @@ -0,0 +1,956 @@
> > +/** @file
> > + Main SEC phase code. Transitions to PEI.
> > +
> > + Copyright (c) 2008 - 2015, Intel Corporation. All rights reserved.<BR>
> > + (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> > +
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> > +**/
> > +
> > +#include <PiPei.h>
> > +
> > +#include <Library/PeimEntryPoint.h>
> > +#include <Library/BaseLib.h>
> > +#include <Library/DebugLib.h>
> > +#include <Library/BaseMemoryLib.h>
> > +#include <Library/PeiServicesLib.h>
> > +#include <Library/PcdLib.h>
> > +#include <Library/UefiCpuLib.h>
> > +#include <Library/DebugAgentLib.h>
> > +#include <Library/IoLib.h>
> > +#include <Library/PeCoffLib.h>
> > +#include <Library/PeCoffGetEntryPointLib.h>
> > +#include <Library/PeCoffExtraActionLib.h>
> > +#include <Library/ExtractGuidedSectionLib.h>
> > +#include <Library/LocalApicLib.h>
> > +#include <Library/PciCf8Lib.h>
> > +
> > +#include <Ppi/TemporaryRamSupport.h>
> > +#include <IndustryStandard/X58Ich10.h>
> > +
> > +#define SEC_IDT_ENTRY_COUNT 34
> > +
> > +typedef struct _SEC_IDT_TABLE {
> > + EFI_PEI_SERVICES *PeiService;
> > + IA32_IDT_GATE_DESCRIPTOR IdtTable[SEC_IDT_ENTRY_COUNT];
> > +} SEC_IDT_TABLE;
> > +
> > +VOID
> > +EFIAPI
> > +SecStartupPhase2 (
> > + IN VOID *Context
> > + );
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +TemporaryRamMigration (
> > + IN CONST EFI_PEI_SERVICES **PeiServices,
> > + IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
> > + IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
> > + IN UINTN CopySize
> > + );
> > +
> > +EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI mTemporaryRamSupportPpi = {
> > + TemporaryRamMigration
> > +};
> > +
> > +EFI_PEI_PPI_DESCRIPTOR mPrivateDispatchTable[] = {
> > + {
> > + (EFI_PEI_PPI_DESCRIPTOR_PPI |
> > EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
> > + &gEfiTemporaryRamSupportPpiGuid,
> > + &mTemporaryRamSupportPpi
> > + },
> > +};
> > +
> > +//
> > +// Template of an IDT entry pointing to 10:FFFFFFE4h.
> > +//
> > +IA32_IDT_GATE_DESCRIPTOR mIdtEntryTemplate = {
> > + { // Bits
> > + 0xffe4, // OffsetLow
> > + 0x10, // Selector
> > + 0x0, // Reserved_0
> > + IA32_IDT_GATE_TYPE_INTERRUPT_32, // GateType
> > + 0xffff // OffsetHigh
> > + }
> > +};
> > +
> > +/**
> > + Locates the main boot firmware volume.
> > +
> > + @param[in,out] BootFv On input, the base of the BootFv
> > + On output, the decompressed main firmware volume
> > +
> > + @retval EFI_SUCCESS The main firmware volume was located and
> > decompressed
> > + @retval EFI_NOT_FOUND The main firmware volume was not found
> > +
> > +**/
> > +EFI_STATUS
> > +FindMainFv (
> > + IN OUT EFI_FIRMWARE_VOLUME_HEADER **BootFv
> > + )
> > +{
> > + EFI_FIRMWARE_VOLUME_HEADER *Fv;
> > + UINTN Distance;
> > +
> > + ASSERT (((UINTN) *BootFv & EFI_PAGE_MASK) == 0);
> > +
> > + Fv = *BootFv;
> > + Distance = (UINTN) (*BootFv)->FvLength;
> > + do {
> > + Fv = (EFI_FIRMWARE_VOLUME_HEADER*) ((UINT8*) Fv -
> EFI_PAGE_SIZE);
> > + Distance += EFI_PAGE_SIZE;
> > + if (Distance > SIZE_32MB) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + if (Fv->Signature != EFI_FVH_SIGNATURE) {
> > + continue;
> > + }
> > +
> > + if ((UINTN) Fv->FvLength > Distance) {
> > + continue;
> > + }
> > +
> > + *BootFv = Fv;
> > + return EFI_SUCCESS;
> > +
> > + } while (TRUE);
> > +}
> > +
> > +/**
> > + Locates a section within a series of sections
> > + with the specified section type.
> > +
> > + The Instance parameter indicates which instance of the section
> > + type to return. (0 is first instance, 1 is second...)
> > +
> > + @param[in] Sections The sections to search
> > + @param[in] SizeOfSections Total size of all sections
> > + @param[in] SectionType The section type to locate
> > + @param[in] Instance The section instance number
> > + @param[out] FoundSection The FFS section if found
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +EFI_STATUS
> > +FindFfsSectionInstance (
> > + IN VOID *Sections,
> > + IN UINTN SizeOfSections,
> > + IN EFI_SECTION_TYPE SectionType,
> > + IN UINTN Instance,
> > + OUT EFI_COMMON_SECTION_HEADER **FoundSection
> > + )
> > +{
> > + EFI_PHYSICAL_ADDRESS CurrentAddress;
> > + UINT32 Size;
> > + EFI_PHYSICAL_ADDRESS EndOfSections;
> > + EFI_COMMON_SECTION_HEADER *Section;
> > + EFI_PHYSICAL_ADDRESS EndOfSection;
> > +
> > + //
> > + // Loop through the FFS file sections within the PEI Core FFS file
> > + //
> > + EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN) Sections;
> > + EndOfSections = EndOfSection + SizeOfSections;
> > + for (;;) {
> > + if (EndOfSection == EndOfSections) {
> > + break;
> > + }
> > + CurrentAddress = (EndOfSection + 3) & ~(3ULL);
> > + if (CurrentAddress >= EndOfSections) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
> > + DEBUG ((EFI_D_INFO, "Section->Type: 0x%x\n", Section->Type));
> > +
> > + Size = SECTION_SIZE (Section);
> > + if (Size < sizeof (*Section)) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + EndOfSection = CurrentAddress + Size;
> > + if (EndOfSection > EndOfSections) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + //
> > + // Look for the requested section type
> > + //
> > + if (Section->Type == SectionType) {
> > + if (Instance == 0) {
> > + *FoundSection = Section;
> > + return EFI_SUCCESS;
> > + } else {
> > + Instance--;
> > + }
> > + }
> > + DEBUG ((EFI_D_INFO, "Section->Type (0x%x) != SectionType (0x%x)\n",
> > Section->Type, SectionType));
> > + }
> > +
> > + return EFI_NOT_FOUND;
> > +}
> > +
> > +/**
> > + Locates a section within a series of sections
> > + with the specified section type.
> > +
> > + @param[in] Sections The sections to search
> > + @param[in] SizeOfSections Total size of all sections
> > + @param[in] SectionType The section type to locate
> > + @param[out] FoundSection The FFS section if found
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +EFI_STATUS
> > +FindFfsSectionInSections (
> > + IN VOID *Sections,
> > + IN UINTN SizeOfSections,
> > + IN EFI_SECTION_TYPE SectionType,
> > + OUT EFI_COMMON_SECTION_HEADER **FoundSection
> > + )
> > +{
> > + return FindFfsSectionInstance (
> > + Sections,
> > + SizeOfSections,
> > + SectionType,
> > + 0,
> > + FoundSection
> > + );
> > +}
> > +
> > +/**
> > + Locates a FFS file with the specified file type and a section
> > + within that file with the specified section type.
> > +
> > + @param[in] Fv The firmware volume to search
> > + @param[in] FileType The file type to locate
> > + @param[in] SectionType The section type to locate
> > + @param[out] FoundSection The FFS section if found
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +EFI_STATUS
> > +FindFfsFileAndSection (
> > + IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
> > + IN EFI_FV_FILETYPE FileType,
> > + IN EFI_SECTION_TYPE SectionType,
> > + OUT EFI_COMMON_SECTION_HEADER **FoundSection
> > + )
> > +{
> > + EFI_STATUS Status;
> > + EFI_PHYSICAL_ADDRESS CurrentAddress;
> > + EFI_PHYSICAL_ADDRESS EndOfFirmwareVolume;
> > + EFI_FFS_FILE_HEADER *File;
> > + UINT32 Size;
> > + EFI_PHYSICAL_ADDRESS EndOfFile;
> > +
> > + if (Fv->Signature != EFI_FVH_SIGNATURE) {
> > + DEBUG ((EFI_D_ERROR, "FV at %p does not have FV header signature\n",
> > Fv));
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + CurrentAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) Fv;
> > + EndOfFirmwareVolume = CurrentAddress + Fv->FvLength;
> > +
> > + //
> > + // Loop through the FFS files in the Boot Firmware Volume
> > + //
> > + for (EndOfFile = CurrentAddress + Fv->HeaderLength; ; ) {
> > +
> > + CurrentAddress = (EndOfFile + 7) & ~(7ULL);
> > + if (CurrentAddress > EndOfFirmwareVolume) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
> > + Size = *(UINT32*) File->Size & 0xffffff;
> > + if (Size < (sizeof (*File) + sizeof (EFI_COMMON_SECTION_HEADER))) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > + DEBUG ((EFI_D_INFO, "File->Type: 0x%x\n", File->Type));
> > +
> > + EndOfFile = CurrentAddress + Size;
> > + if (EndOfFile > EndOfFirmwareVolume) {
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + //
> > + // Look for the request file type
> > + //
> > + if (File->Type != FileType) {
> > + DEBUG ((EFI_D_INFO, "File->Type (0x%x) != FileType (0x%x)\n", File-
> >Type,
> > FileType));
> > + continue;
> > + }
> > +
> > + Status = FindFfsSectionInSections (
> > + (VOID*) (File + 1),
> > + (UINTN) EndOfFile - (UINTN) (File + 1),
> > + SectionType,
> > + FoundSection
> > + );
> > + if (!EFI_ERROR (Status) || (Status == EFI_VOLUME_CORRUPTED)) {
> > + return Status;
> > + }
> > + }
> > +}
> > +
> > +/**
> > + Locates the compressed main firmware volume and decompresses it.
> > +
> > + @param[in,out] Fv On input, the firmware volume to search
> > + On output, the decompressed BOOT/PEI FV
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +EFI_STATUS
> > +DecompressMemFvs (
> > + IN OUT EFI_FIRMWARE_VOLUME_HEADER **Fv
> > + )
> > +{
> > + EFI_STATUS Status;
> > + EFI_GUID_DEFINED_SECTION *Section;
> > + UINT32 OutputBufferSize;
> > + UINT32 ScratchBufferSize;
> > + UINT16 SectionAttribute;
> > + UINT32 AuthenticationStatus;
> > + VOID *OutputBuffer;
> > + VOID *ScratchBuffer;
> > + EFI_COMMON_SECTION_HEADER *FvSection;
> > + EFI_FIRMWARE_VOLUME_HEADER *PeiMemFv;
> > + EFI_FIRMWARE_VOLUME_HEADER *DxeMemFv;
> > + UINT32 FvHeaderSize;
> > + UINT32 FvSectionSize;
> > +
> > + FvSection = (EFI_COMMON_SECTION_HEADER*) NULL;
> > +
> > + DEBUG ((EFI_D_INFO, "Find and decompress FV image.\n"));
> > + Status = FindFfsFileAndSection (
> > + *Fv,
> > + EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE,
> > + EFI_SECTION_GUID_DEFINED,
> > + (EFI_COMMON_SECTION_HEADER**) &Section
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Unable to find GUID defined section\n"));
> > + return Status;
> > + }
> > +
> > + Status = ExtractGuidedSectionGetInfo (
> > + Section,
> > + &OutputBufferSize,
> > + &ScratchBufferSize,
> > + &SectionAttribute
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Unable to GetInfo for GUIDed section\n"));
> > + return Status;
> > + }
> > +
> > + OutputBuffer = (VOID*) ((UINT8*)(UINTN) PcdGet32
> > (PcdSimicsDxeMemFvBase) + SIZE_1MB);
> > + ScratchBuffer = ALIGN_POINTER ((UINT8*) OutputBuffer +
> OutputBufferSize,
> > SIZE_1MB);
> > +
> > + DEBUG ((EFI_D_INFO, "PcdSimicsDxeMemFvBase: 0x%x\n", PcdGet32
> > (PcdSimicsDxeMemFvBase)));
> > + DEBUG ((EFI_D_INFO, "OutputBuffer: 0x%x\n", OutputBuffer));
> > + DEBUG ((EFI_D_INFO, "OutputBufferSize: 0x%x\n", OutputBufferSize));
> > + DEBUG ((EFI_D_INFO, "ScratchBuffer: 0x%x\n", ScratchBuffer));
> > + DEBUG ((EFI_D_INFO, "ScratchBufferSize: 0x%x\n", ScratchBufferSize));
> > + DEBUG ((EFI_D_INFO, "PcdSimicsDecompressionScratchEnd: 0x%x\n",
> > PcdGet32 (PcdSimicsDecompressionScratchEnd)));
> > +
> > + DEBUG ((EFI_D_VERBOSE, "%a: OutputBuffer@%p+0x%x
> > ScratchBuffer@%p+0x%x "
> > + "PcdSimicsDecompressionScratchEnd=0x%x\n", __FUNCTION__,
> > OutputBuffer,
> > + OutputBufferSize, ScratchBuffer, ScratchBufferSize,
> > + PcdGet32 (PcdSimicsDecompressionScratchEnd)));
> > + ASSERT ((UINTN)ScratchBuffer + ScratchBufferSize ==
> > + PcdGet32 (PcdSimicsDecompressionScratchEnd));
> > +
> > + Status = ExtractGuidedSectionDecode (
> > + Section,
> > + &OutputBuffer,
> > + ScratchBuffer,
> > + &AuthenticationStatus
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Error during GUID section decode\n"));
> > + return Status;
> > + }
> > +
> > + Status = FindFfsSectionInstance (
> > + OutputBuffer,
> > + OutputBufferSize,
> > + EFI_SECTION_FIRMWARE_VOLUME_IMAGE,
> > + 0,
> > + &FvSection
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Unable to find PEI FV section\n"));
> > + return Status;
> > + }
> > +
> > + ASSERT (SECTION_SIZE (FvSection) ==
> > + (PcdGet32 (PcdSimicsPeiMemFvSize) + sizeof (*FvSection)));
> > + ASSERT (FvSection->Type == EFI_SECTION_FIRMWARE_VOLUME_IMAGE);
> > +
> > + PeiMemFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32
> > (PcdSimicsPeiMemFvBase);
> > + CopyMem (PeiMemFv, (VOID*) (FvSection + 1), PcdGet32
> > (PcdSimicsPeiMemFvSize));
> > +
> > + if (PeiMemFv->Signature != EFI_FVH_SIGNATURE) {
> > + DEBUG ((EFI_D_ERROR, "Extracted FV at %p does not have FV header
> > signature\n", PeiMemFv));
> > + CpuDeadLoop ();
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + Status = FindFfsSectionInstance (
> > + OutputBuffer,
> > + OutputBufferSize,
> > + EFI_SECTION_FIRMWARE_VOLUME_IMAGE,
> > + 1,
> > + &FvSection
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Unable to find DXE FV section\n"));
> > + return Status;
> > + }
> > +
> > + ASSERT (FvSection->Type == EFI_SECTION_FIRMWARE_VOLUME_IMAGE);
> > +
> > + if (IS_SECTION2 (FvSection)) {
> > + FvSectionSize = SECTION2_SIZE (FvSection);
> > + FvHeaderSize = sizeof (EFI_COMMON_SECTION_HEADER2);
> > + } else {
> > + FvSectionSize = SECTION_SIZE (FvSection);
> > + FvHeaderSize = sizeof (EFI_COMMON_SECTION_HEADER);
> > + }
> > +
> > + ASSERT (FvSectionSize == (PcdGet32 (PcdSimicsDxeMemFvSize) +
> > FvHeaderSize));
> > +
> > + DxeMemFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32
> > (PcdSimicsDxeMemFvBase);
> > + CopyMem (DxeMemFv, (VOID*) ((UINTN)FvSection + FvHeaderSize),
> > PcdGet32 (PcdSimicsDxeMemFvSize));
> > +
> > + if (DxeMemFv->Signature != EFI_FVH_SIGNATURE) {
> > + DEBUG ((EFI_D_ERROR, "Extracted FV at %p does not have FV header
> > signature\n", DxeMemFv));
> > + CpuDeadLoop ();
> > + return EFI_VOLUME_CORRUPTED;
> > + }
> > +
> > + *Fv = PeiMemFv;
> > + return EFI_SUCCESS;
> > +}
> > +
> > +/**
> > + Locates the PEI Core entry point address
> > +
> > + @param[in] Fv The firmware volume to search
> > + @param[out] PeiCoreEntryPoint The entry point of the PEI Core image
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +EFI_STATUS
> > +FindPeiCoreImageBaseInFv (
> > + IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
> > + OUT EFI_PHYSICAL_ADDRESS *PeiCoreImageBase
> > + )
> > +{
> > + EFI_STATUS Status;
> > + EFI_COMMON_SECTION_HEADER *Section;
> > +
> > + DEBUG ((EFI_D_ERROR, "Find PEI Core image.\n"));
> > + Status = FindFfsFileAndSection (
> > + Fv,
> > + EFI_FV_FILETYPE_PEI_CORE,
> > + EFI_SECTION_PE32,
> > + &Section
> > + );
> > + if (EFI_ERROR (Status)) {
> > + Status = FindFfsFileAndSection (
> > + Fv,
> > + EFI_FV_FILETYPE_PEI_CORE,
> > + EFI_SECTION_TE,
> > + &Section
> > + );
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((EFI_D_ERROR, "Unable to find PEI Core image\n"));
> > + return Status;
> > + }
> > + }
> > +
> > + *PeiCoreImageBase = (EFI_PHYSICAL_ADDRESS)(UINTN)(Section + 1);
> > + DEBUG ((EFI_D_INFO, "PEI core image base 0x%016LX.\n",
> > *PeiCoreImageBase));
> > + return EFI_SUCCESS;
> > +}
> > +
> > +
> > +/**
> > + Reads 8-bits of CMOS data.
> > +
> > + Reads the 8-bits of CMOS data at the location specified by Index.
> > + The 8-bit read value is returned.
> > +
> > + @param Index The CMOS location to read.
> > +
> > + @return The value read.
> > +
> > +**/
> > +STATIC
> > +UINT8
> > +CmosRead8 (
> > + IN UINTN Index
> > + )
> > +{
> > + IoWrite8 (0x70, (UINT8) Index);
> > + return IoRead8 (0x71);
> > +}
> > +
> > +
> > +STATIC
> > +BOOLEAN
> > +IsS3Resume (
> > + VOID
> > + )
> > +{
> > + DEBUG((EFI_D_INFO, "modeValue = %x\n",
> > IoBitFieldRead16(ICH10_PMBASE_IO + 4, 10, 12)));
> > + return (IoBitFieldRead16(ICH10_PMBASE_IO + 4, 10, 12) == 0x5);
> > +}
> > +
> > +
> > +STATIC
> > +EFI_STATUS
> > +GetS3ResumePeiFv (
> > + IN OUT EFI_FIRMWARE_VOLUME_HEADER **PeiFv
> > + )
> > +{
> > + *PeiFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32
> > (PcdSimicsPeiMemFvBase);
> > + return EFI_SUCCESS;
> > +}
> > +
> > +
> > +/**
> > + Locates the PEI Core entry point address
> > +
> > + @param[in,out] Fv The firmware volume to search
> > + @param[out] PeiCoreEntryPoint The entry point of the PEI Core image
> > +
> > + @retval EFI_SUCCESS The file and section was found
> > + @retval EFI_NOT_FOUND The file and section was not found
> > + @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
> > +
> > +**/
> > +VOID
> > +FindPeiCoreImageBase (
> > + IN OUT EFI_FIRMWARE_VOLUME_HEADER **BootFv,
> > + OUT EFI_PHYSICAL_ADDRESS *PeiCoreImageBase
> > + )
> > +{
> > + BOOLEAN S3Resume;
> > +
> > + *PeiCoreImageBase = 0;
> > +
> > + S3Resume = IsS3Resume ();
> > + if (S3Resume && !FeaturePcdGet (PcdSmmSmramRequire)) {
> > + //
> > + // A malicious runtime OS may have injected something into our
> previously
> > + // decoded PEI FV, but we don't care about that unless SMM/SMRAM is
> > required.
> > + //
> > + DEBUG ((EFI_D_INFO, "SEC: S3 resume\n"));
> > + GetS3ResumePeiFv (BootFv);
> > + } else {
> > + //
> > + // We're either not resuming, or resuming "securely" -- we'll decompress
> > + // both PEI FV and DXE FV from pristine flash.
> > + //
> > + DEBUG ((EFI_D_INFO, "SEC: %a\n",
> > + S3Resume ? "S3 resume (with PEI decompression)" : "Normal boot"));
> > + FindMainFv (BootFv);
> > +
> > + DecompressMemFvs (BootFv);
> > + }
> > +
> > + FindPeiCoreImageBaseInFv (*BootFv, PeiCoreImageBase);
> > +}
> > +
> > +/**
> > + Find core image base.
> > +
> > +**/
> > +EFI_STATUS
> > +FindImageBase (
> > + IN EFI_FIRMWARE_VOLUME_HEADER *BootFirmwareVolumePtr,
> > + OUT EFI_PHYSICAL_ADDRESS *SecCoreImageBase
> > + )
> > +{
> > + EFI_PHYSICAL_ADDRESS CurrentAddress;
> > + EFI_PHYSICAL_ADDRESS EndOfFirmwareVolume;
> > + EFI_FFS_FILE_HEADER *File;
> > + UINT32 Size;
> > + EFI_PHYSICAL_ADDRESS EndOfFile;
> > + EFI_COMMON_SECTION_HEADER *Section;
> > + EFI_PHYSICAL_ADDRESS EndOfSection;
> > +
> > + *SecCoreImageBase = 0;
> > +
> > + CurrentAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)
> > BootFirmwareVolumePtr;
> > + EndOfFirmwareVolume = CurrentAddress + BootFirmwareVolumePtr-
> > >FvLength;
> > +
> > + //
> > + // Loop through the FFS files in the Boot Firmware Volume
> > + //
> > + for (EndOfFile = CurrentAddress + BootFirmwareVolumePtr-
> >HeaderLength; ;
> > ) {
> > +
> > + CurrentAddress = (EndOfFile + 7) & 0xfffffffffffffff8ULL;
> > + if (CurrentAddress > EndOfFirmwareVolume) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
> > + Size = *(UINT32*) File->Size & 0xffffff;
> > + if (Size < sizeof (*File)) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + EndOfFile = CurrentAddress + Size;
> > + if (EndOfFile > EndOfFirmwareVolume) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + //
> > + // Look for SEC Core
> > + //
> > + if (File->Type != EFI_FV_FILETYPE_SECURITY_CORE) {
> > + continue;
> > + }
> > +
> > + //
> > + // Loop through the FFS file sections within the FFS file
> > + //
> > + EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN) (File + 1);
> > + for (;;) {
> > + CurrentAddress = (EndOfSection + 3) & 0xfffffffffffffffcULL;
> > + Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
> > +
> > + Size = *(UINT32*) Section->Size & 0xffffff;
> > + if (Size < sizeof (*Section)) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + EndOfSection = CurrentAddress + Size;
> > + if (EndOfSection > EndOfFile) {
> > + return EFI_NOT_FOUND;
> > + }
> > +
> > + //
> > + // Look for executable sections
> > + //
> > + if (Section->Type == EFI_SECTION_PE32 || Section->Type ==
> > EFI_SECTION_TE) {
> > + if (File->Type == EFI_FV_FILETYPE_SECURITY_CORE) {
> > + *SecCoreImageBase = (PHYSICAL_ADDRESS) (UINTN) (Section + 1);
> > + }
> > + break;
> > + }
> > + }
> > +
> > + //
> > + // SEC Core image found
> > + //
> > + if (*SecCoreImageBase != 0) {
> > + return EFI_SUCCESS;
> > + }
> > + }
> > +}
> > +
> > +/*
> > + Find and return Pei Core entry point.
> > +
> > + It also find SEC and PEI Core file debug information. It will report them if
> > + remote debug is enabled.
> > +
> > +**/
> > +VOID
> > +FindAndReportEntryPoints (
> > + IN EFI_FIRMWARE_VOLUME_HEADER **BootFirmwareVolumePtr,
> > + OUT EFI_PEI_CORE_ENTRY_POINT *PeiCoreEntryPoint
> > + )
> > +{
> > + EFI_STATUS Status;
> > + EFI_PHYSICAL_ADDRESS SecCoreImageBase;
> > + EFI_PHYSICAL_ADDRESS PeiCoreImageBase;
> > + PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
> > +
> > + //
> > + // Find SEC Core and PEI Core image base
> > + //
> > + Status = FindImageBase (*BootFirmwareVolumePtr,
> &SecCoreImageBase);
> > + ASSERT_EFI_ERROR (Status);
> > +
> > + FindPeiCoreImageBase (BootFirmwareVolumePtr, &PeiCoreImageBase);
> > +
> > + ZeroMem ((VOID *) &ImageContext, sizeof
> > (PE_COFF_LOADER_IMAGE_CONTEXT));
> > + //
> > + // Report SEC Core debug information when remote debug is enabled
> > + //
> > + ImageContext.ImageAddress = SecCoreImageBase;
> > + ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN)
> > ImageContext.ImageAddress);
> > + PeCoffLoaderRelocateImageExtraAction (&ImageContext);
> > +
> > + //
> > + // Report PEI Core debug information when remote debug is enabled
> > + //
> > + ImageContext.ImageAddress =
> > (EFI_PHYSICAL_ADDRESS)(UINTN)PeiCoreImageBase;
> > + ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN)
> > ImageContext.ImageAddress);
> > + PeCoffLoaderRelocateImageExtraAction (&ImageContext);
> > +
> > + //
> > + // Find PEI Core entry point
> > + //
> > + Status = PeCoffLoaderGetEntryPoint ((VOID *) (UINTN) PeiCoreImageBase,
> > (VOID**) PeiCoreEntryPoint);
> > + if (EFI_ERROR (Status)) {
> > + *PeiCoreEntryPoint = 0;
> > + }
> > +
> > + return;
> > +}
> > +
> > +VOID
> > +EFIAPI
> > +SecCoreStartupWithStack (
> > + IN EFI_FIRMWARE_VOLUME_HEADER *BootFv,
> > + IN VOID *TopOfCurrentStack
> > + )
> > +{
> > + EFI_SEC_PEI_HAND_OFF SecCoreData;
> > + SEC_IDT_TABLE IdtTableInStack;
> > + IA32_DESCRIPTOR IdtDescriptor;
> > + UINT32 Index;
> > + volatile UINT8 *Table;
> > +
> > + //
> > + // Initialize floating point operating environment
> > + // to be compliant with UEFI spec.
> > + //
> > + InitializeFloatingPointUnits ();
> > +
> > + //
> > + // Initialize the PCIe Configuration base register.
> > + //
> > + PciCf8Write32 (PCI_CF8_LIB_ADDRESS (0xFF, 0, 1, 0x50), 0xE0000001);
> > +
> > + //
> > + // To ensure SMM can't be compromised on S3 resume, we must force
> re-init
> > of
> > + // the BaseExtractGuidedSectionLib. Since this is before library
> contructors
> > + // are called, we must use a loop rather than SetMem.
> > + //
> > + Table = (UINT8*)(UINTN)FixedPcdGet64
> > (PcdGuidedExtractHandlerTableAddress);
> > + for (Index = 0;
> > + Index < FixedPcdGet32 (PcdGuidedExtractHandlerTableSize);
> > + ++Index) {
> > + Table[Index] = 0;
> > + }
> > +
> > + ProcessLibraryConstructorList (NULL, NULL);
> > +
> > + DEBUG ((EFI_D_INFO,
> > + "SecCoreStartupWithStack(0x%x, 0x%x)\n",
> > + (UINT32)(UINTN)BootFv,
> > + (UINT32)(UINTN)TopOfCurrentStack
> > + ));
> > +
> > + //
> > + // Initialize IDT
> > + //
> > + IdtTableInStack.PeiService = NULL;
> > + for (Index = 0; Index < SEC_IDT_ENTRY_COUNT; Index ++) {
> > + CopyMem (&IdtTableInStack.IdtTable[Index], &mIdtEntryTemplate, sizeof
> > (mIdtEntryTemplate));
> > + }
> > +
> > + IdtDescriptor.Base = (UINTN)&IdtTableInStack.IdtTable;
> > + IdtDescriptor.Limit = (UINT16)(sizeof (IdtTableInStack.IdtTable) - 1);
> > +
> > + AsmWriteIdtr (&IdtDescriptor);
> > +
> > +#if defined (MDE_CPU_X64)
> > + //
> > + // ASSERT that the Page Tables were set by the reset vector code to
> > + // the address we expect.
> > + //
> > + ASSERT (AsmReadCr3 () == (UINTN) PcdGet32
> > (PcdSimicsSecPageTablesBase));
> > +#endif
> > +
> > + //
> > + // |-------------| <-- TopOfCurrentStack
> > + // | Stack | 32k
> > + // |-------------|
> > + // | Heap | 32k
> > + // |-------------| <-- SecCoreData.TemporaryRamBase
> > + //
> > +
> > + ASSERT ((UINTN) (PcdGet32 (PcdSimicsSecPeiTempRamBase) +
> > + PcdGet32 (PcdSimicsSecPeiTempRamSize)) ==
> > + (UINTN) TopOfCurrentStack);
> > +
> > + //
> > + // Initialize SEC hand-off state
> > + //
> > + SecCoreData.DataSize = sizeof(EFI_SEC_PEI_HAND_OFF);
> > +
> > + SecCoreData.TemporaryRamSize = (UINTN) PcdGet32
> > (PcdSimicsSecPeiTempRamSize);
> > + SecCoreData.TemporaryRamBase = (VOID*)((UINT8
> *)TopOfCurrentStack
> > - SecCoreData.TemporaryRamSize);
> > +
> > + SecCoreData.PeiTemporaryRamBase =
> SecCoreData.TemporaryRamBase;
> > + SecCoreData.PeiTemporaryRamSize = SecCoreData.TemporaryRamSize
> >>
> > 1;
> > +
> > + SecCoreData.StackBase = (UINT8
> *)SecCoreData.TemporaryRamBase +
> > SecCoreData.PeiTemporaryRamSize;
> > + SecCoreData.StackSize = SecCoreData.TemporaryRamSize >> 1;
> > +
> > + SecCoreData.BootFirmwareVolumeBase = BootFv;
> > + SecCoreData.BootFirmwareVolumeSize = (UINTN) BootFv->FvLength;
> > +
> > + //
> > + // Make sure the 8259 is masked before initializing the Debug Agent and
> the
> > debug timer is enabled
> > + //
> > + IoWrite8 (0x21, 0xff);
> > + IoWrite8 (0xA1, 0xff);
> > +
> > + //
> > + // Initialize Local APIC Timer hardware and disable Local APIC Timer
> > + // interrupts before initializing the Debug Agent and the debug timer is
> > + // enabled.
> > + //
> > + InitializeApicTimer (0, MAX_UINT32, TRUE, 5);
> > + DisableApicTimerInterrupt ();
> > +
> > + //
> > + // Initialize Debug Agent to support source level debug in SEC/PEI phases
> > before memory ready.
> > + //
> > + InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, &SecCoreData,
> > SecStartupPhase2);
> > +}
> > +
> > +/**
> > + Caller provided function to be invoked at the end of
> InitializeDebugAgent().
> > +
> > + Entry point to the C language phase of SEC. After the SEC assembly
> > + code has initialized some temporary memory and set up the stack,
> > + the control is transferred to this function.
> > +
> > + @param[in] Context The first input parameter of InitializeDebugAgent().
> > +
> > +**/
> > +VOID
> > +EFIAPI
> > +SecStartupPhase2(
> > + IN VOID *Context
> > + )
> > +{
> > + EFI_SEC_PEI_HAND_OFF *SecCoreData;
> > + EFI_FIRMWARE_VOLUME_HEADER *BootFv;
> > + EFI_PEI_CORE_ENTRY_POINT PeiCoreEntryPoint;
> > +
> > + SecCoreData = (EFI_SEC_PEI_HAND_OFF *) Context;
> > +
> > + //
> > + // Find PEI Core entry point. It will report SEC and Pei Core debug
> information
> > if remote debug
> > + // is enabled.
> > + //
> > + BootFv = (EFI_FIRMWARE_VOLUME_HEADER *)SecCoreData-
> > >BootFirmwareVolumeBase;
> > + FindAndReportEntryPoints (&BootFv, &PeiCoreEntryPoint);
> > + SecCoreData->BootFirmwareVolumeBase = BootFv;
> > + SecCoreData->BootFirmwareVolumeSize = (UINTN) BootFv->FvLength;
> > +
> > + //
> > + // Transfer the control to the PEI core
> > + //
> > + (*PeiCoreEntryPoint) (SecCoreData, (EFI_PEI_PPI_DESCRIPTOR
> > *)&mPrivateDispatchTable);
> > +
> > + //
> > + // If we get here then the PEI Core returned, which is not recoverable.
> > + //
> > + ASSERT (FALSE);
> > + CpuDeadLoop ();
> > +}
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +TemporaryRamMigration (
> > + IN CONST EFI_PEI_SERVICES **PeiServices,
> > + IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
> > + IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
> > + IN UINTN CopySize
> > + )
> > +{
> > + IA32_DESCRIPTOR IdtDescriptor;
> > + VOID *OldHeap;
> > + VOID *NewHeap;
> > + VOID *OldStack;
> > + VOID *NewStack;
> > + DEBUG_AGENT_CONTEXT_POSTMEM_SEC DebugAgentContext;
> > + BOOLEAN OldStatus;
> > + BASE_LIBRARY_JUMP_BUFFER JumpBuffer;
> > +
> > + DEBUG ((EFI_D_INFO,
> > + "TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
> > + TemporaryMemoryBase,
> > + PermanentMemoryBase,
> > + (UINT64)CopySize
> > + ));
> > +
> > + OldHeap = (VOID*)(UINTN)TemporaryMemoryBase;
> > + NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));
> > +
> > + OldStack = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
> > + NewStack = (VOID*)(UINTN)PermanentMemoryBase;
> > +
> > + DebugAgentContext.HeapMigrateOffset = (UINTN)NewHeap -
> > (UINTN)OldHeap;
> > + DebugAgentContext.StackMigrateOffset = (UINTN)NewStack -
> > (UINTN)OldStack;
> > +
> > + OldStatus = SaveAndSetDebugTimerInterrupt (FALSE);
> > + InitializeDebugAgent (DEBUG_AGENT_INIT_POSTMEM_SEC, (VOID *)
> > &DebugAgentContext, NULL);
> > +
> > + //
> > + // Migrate Heap
> > + //
> > + CopyMem (NewHeap, OldHeap, CopySize >> 1);
> > +
> > + //
> > + // Migrate Stack
> > + //
> > + CopyMem (NewStack, OldStack, CopySize >> 1);
> > +
> > + //
> > + // Rebase IDT table in permanent memory
> > + //
> > + AsmReadIdtr (&IdtDescriptor);
> > + IdtDescriptor.Base = IdtDescriptor.Base - (UINTN)OldStack +
> > (UINTN)NewStack;
> > +
> > + AsmWriteIdtr (&IdtDescriptor);
> > +
> > + //
> > + // Use SetJump()/LongJump() to switch to a new stack.
> > + //
> > + if (SetJump (&JumpBuffer) == 0) {
> > +#if defined (MDE_CPU_IA32)
> > + JumpBuffer.Esp = JumpBuffer.Esp +
> > DebugAgentContext.StackMigrateOffset;
> > +#endif
> > +#if defined (MDE_CPU_X64)
> > + JumpBuffer.Rsp = JumpBuffer.Rsp +
> > DebugAgentContext.StackMigrateOffset;
> > +#endif
> > + LongJump (&JumpBuffer, (UINTN)-1);
> > + }
> > +
> > + SaveAndSetDebugTimerInterrupt (OldStatus);
> > +
> > + return EFI_SUCCESS;
> > +}
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
> > new file mode 100644
> > index 0000000000..771fddb487
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
> > @@ -0,0 +1,148 @@
> > +/** @file
> > + A DXE_DRIVER providing SMRAM access by producing
> > EFI_SMM_ACCESS2_PROTOCOL.
> > +
> > + X58 TSEG is expected to have been verified and set up by the
> SmmAccessPei
> > + driver.
> > +
> > + Copyright (C) 2013, 2015, Red Hat, Inc.<BR>
> > + Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
> > +
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> > +**/
> > +
> > +#include <Library/DebugLib.h>
> > +#include <Library/PcdLib.h>
> > +#include <Library/UefiBootServicesTableLib.h>
> > +#include <Protocol/SmmAccess2.h>
> > +
> > +#include "SmramInternal.h"
> > +
> > +/**
> > + Opens the SMRAM area to be accessible by a boot-service driver.
> > +
> > + This function "opens" SMRAM so that it is visible while not inside of SMM.
> > + The function should return EFI_UNSUPPORTED if the hardware does not
> > support
> > + hiding of SMRAM. The function should return EFI_DEVICE_ERROR if the
> > SMRAM
> > + configuration is locked.
> > +
> > + @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
> > +
> > + @retval EFI_SUCCESS The operation was successful.
> > + @retval EFI_UNSUPPORTED The system does not support opening and
> > closing of
> > + SMRAM.
> > + @retval EFI_DEVICE_ERROR SMRAM cannot be opened, perhaps because
> it is
> > + locked.
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccess2DxeOpen (
> > + IN EFI_SMM_ACCESS2_PROTOCOL *This
> > + )
> > +{
> > + return SmramAccessOpen (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Inhibits access to the SMRAM.
> > +
> > + This function "closes" SMRAM so that it is not visible while outside of
> SMM.
> > + The function should return EFI_UNSUPPORTED if the hardware does not
> > support
> > + hiding of SMRAM.
> > +
> > + @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
> > +
> > + @retval EFI_SUCCESS The operation was successful.
> > + @retval EFI_UNSUPPORTED The system does not support opening and
> > closing of
> > + SMRAM.
> > + @retval EFI_DEVICE_ERROR SMRAM cannot be closed.
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccess2DxeClose (
> > + IN EFI_SMM_ACCESS2_PROTOCOL *This
> > + )
> > +{
> > + return SmramAccessClose (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Inhibits access to the SMRAM.
> > +
> > + This function prohibits access to the SMRAM region. This function is
> usually
> > + implemented such that it is a write-once operation.
> > +
> > + @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
> > +
> > + @retval EFI_SUCCESS The device was successfully locked.
> > + @retval EFI_UNSUPPORTED The system does not support locking of
> SMRAM.
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccess2DxeLock (
> > + IN EFI_SMM_ACCESS2_PROTOCOL *This
> > + )
> > +{
> > + return SmramAccessLock (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Queries the memory controller for the possible regions that will support
> > + SMRAM.
> > +
> > + @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
> > + @param[in,out] SmramMapSize A pointer to the size, in bytes, of the
> > + SmramMemoryMap buffer.
> > + @param[in,out] SmramMap A pointer to the buffer in which firmware
> > + places the current memory map.
> > +
> > + @retval EFI_SUCCESS The chipset supported the given resource.
> > + @retval EFI_BUFFER_TOO_SMALL The SmramMap parameter was too
> small.
> > The
> > + current buffer size needed to hold the memory
> > + map is returned in SmramMapSize.
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccess2DxeGetCapabilities (
> > + IN CONST EFI_SMM_ACCESS2_PROTOCOL *This,
> > + IN OUT UINTN *SmramMapSize,
> > + IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
> > + )
> > +{
> > + return SmramAccessGetCapabilities (This->LockState, This->OpenState,
> > + SmramMapSize, SmramMap);
> > +}
> > +
> > +//
> > +// LockState and OpenState will be filled in by the entry point.
> > +//
> > +STATIC EFI_SMM_ACCESS2_PROTOCOL mAccess2 = {
> > + &SmmAccess2DxeOpen,
> > + &SmmAccess2DxeClose,
> > + &SmmAccess2DxeLock,
> > + &SmmAccess2DxeGetCapabilities
> > +};
> > +
> > +//
> > +// Entry point of this driver.
> > +//
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccess2DxeEntryPoint (
> > + IN EFI_HANDLE ImageHandle,
> > + IN EFI_SYSTEM_TABLE *SystemTable
> > + )
> > +{
> > + //
> > + // This module should only be included if SMRAM support is required.
> > + //
> > + ASSERT (FeaturePcdGet (PcdSmmSmramRequire));
> > +
> > + GetStates (&mAccess2.LockState, &mAccess2.OpenState);
> > + return gBS->InstallMultipleProtocolInterfaces (&ImageHandle,
> > + &gEfiSmmAccess2ProtocolGuid, &mAccess2,
> > + NULL);
> > +}
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
> > new file mode 100644
> > index 0000000000..d07d88142a
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
> > @@ -0,0 +1,353 @@
> > +/** @file
> > + A PEIM with the following responsibilities:
> > +
> > + - verify & configure the X58 TSEG in the entry point,
> > + - provide SMRAM access by producing PEI_SMM_ACCESS_PPI,
> > + - set aside the SMM_S3_RESUME_STATE object at the bottom of TSEG,
> and
> > expose
> > + it via the gEfiAcpiVariableGuid GUID HOB.
> > +
> > + This PEIM runs from RAM, so we can write to variables with static storage
> > + duration.
> > +
> > + Copyright (C) 2013, 2015, Red Hat, Inc.<BR>
> > + Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> > +
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> > +**/
> > +
> > +#include <Guid/AcpiS3Context.h>
> > +#include <Library/BaseLib.h>
> > +#include <Library/BaseMemoryLib.h>
> > +#include <Library/DebugLib.h>
> > +#include <Library/HobLib.h>
> > +#include <Library/IoLib.h>
> > +#include <Library/PcdLib.h>
> > +#include <Library/PciLib.h>
> > +#include <Library/PeiServicesLib.h>
> > +#include <Ppi/SmmAccess.h>
> > +
> > +#include <SimicsPlatforms.h>
> > +
> > +#include "SmramInternal.h"
> > +
> > +//
> > +// PEI_SMM_ACCESS_PPI implementation.
> > +//
> > +
> > +/**
> > + Opens the SMRAM area to be accessible by a PEIM driver.
> > +
> > + This function "opens" SMRAM so that it is visible while not inside of SMM.
> > + The function should return EFI_UNSUPPORTED if the hardware does not
> > support
> > + hiding of SMRAM. The function should return EFI_DEVICE_ERROR if the
> > SMRAM
> > + configuration is locked.
> > +
> > + @param PeiServices General purpose services available to every
> > + PEIM.
> > + @param This The pointer to the SMM Access Interface.
> > + @param DescriptorIndex The region of SMRAM to Open.
> > +
> > + @retval EFI_SUCCESS The region was successfully opened.
> > + @retval EFI_DEVICE_ERROR The region could not be opened because
> > locked
> > + by chipset.
> > + @retval EFI_INVALID_PARAMETER The descriptor index was out of
> bounds.
> > +
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccessPeiOpen (
> > + IN EFI_PEI_SERVICES **PeiServices,
> > + IN PEI_SMM_ACCESS_PPI *This,
> > + IN UINTN DescriptorIndex
> > + )
> > +{
> > + if (DescriptorIndex >= DescIdxCount) {
> > + return EFI_INVALID_PARAMETER;
> > + }
> > +
> > + //
> > + // According to current practice, DescriptorIndex is not considered at all,
> > + // beyond validating it.
> > + //
> > + return SmramAccessOpen (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Inhibits access to the SMRAM.
> > +
> > + This function "closes" SMRAM so that it is not visible while outside of
> SMM.
> > + The function should return EFI_UNSUPPORTED if the hardware does not
> > support
> > + hiding of SMRAM.
> > +
> > + @param PeiServices General purpose services available to every
> > + PEIM.
> > + @param This The pointer to the SMM Access Interface.
> > + @param DescriptorIndex The region of SMRAM to Close.
> > +
> > + @retval EFI_SUCCESS The region was successfully closed.
> > + @retval EFI_DEVICE_ERROR The region could not be closed because
> > + locked by chipset.
> > + @retval EFI_INVALID_PARAMETER The descriptor index was out of
> bounds.
> > +
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccessPeiClose (
> > + IN EFI_PEI_SERVICES **PeiServices,
> > + IN PEI_SMM_ACCESS_PPI *This,
> > + IN UINTN DescriptorIndex
> > + )
> > +{
> > + if (DescriptorIndex >= DescIdxCount) {
> > + return EFI_INVALID_PARAMETER;
> > + }
> > +
> > + //
> > + // According to current practice, DescriptorIndex is not considered at all,
> > + // beyond validating it.
> > + //
> > + return SmramAccessClose (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Inhibits access to the SMRAM.
> > +
> > + This function prohibits access to the SMRAM region. This function is
> usually
> > + implemented such that it is a write-once operation.
> > +
> > + @param PeiServices General purpose services available to every
> > + PEIM.
> > + @param This The pointer to the SMM Access Interface.
> > + @param DescriptorIndex The region of SMRAM to Close.
> > +
> > + @retval EFI_SUCCESS The region was successfully locked.
> > + @retval EFI_DEVICE_ERROR The region could not be locked because at
> > + least one range is still open.
> > + @retval EFI_INVALID_PARAMETER The descriptor index was out of
> bounds.
> > +
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccessPeiLock (
> > + IN EFI_PEI_SERVICES **PeiServices,
> > + IN PEI_SMM_ACCESS_PPI *This,
> > + IN UINTN DescriptorIndex
> > + )
> > +{
> > + if (DescriptorIndex >= DescIdxCount) {
> > + return EFI_INVALID_PARAMETER;
> > + }
> > +
> > + //
> > + // According to current practice, DescriptorIndex is not considered at all,
> > + // beyond validating it.
> > + //
> > + return SmramAccessLock (&This->LockState, &This->OpenState);
> > +}
> > +
> > +/**
> > + Queries the memory controller for the possible regions that will support
> > + SMRAM.
> > +
> > + @param PeiServices General purpose services available to every
> > + PEIM.
> > + @param This The pointer to the SmmAccessPpi Interface.
> > + @param SmramMapSize The pointer to the variable containing size
> of
> > + the buffer to contain the description
> > + information.
> > + @param SmramMap The buffer containing the data describing
> the
> > + Smram region descriptors.
> > +
> > + @retval EFI_BUFFER_TOO_SMALL The user did not provide a sufficient
> > buffer.
> > + @retval EFI_SUCCESS The user provided a sufficiently-sized buffer.
> > +
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccessPeiGetCapabilities (
> > + IN EFI_PEI_SERVICES **PeiServices,
> > + IN PEI_SMM_ACCESS_PPI *This,
> > + IN OUT UINTN *SmramMapSize,
> > + IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
> > + )
> > +{
> > + return SmramAccessGetCapabilities (This->LockState, This->OpenState,
> > + SmramMapSize, SmramMap);
> > +}
> > +
> > +//
> > +// LockState and OpenState will be filled in by the entry point.
> > +//
> > +STATIC PEI_SMM_ACCESS_PPI mAccess = {
> > + &SmmAccessPeiOpen,
> > + &SmmAccessPeiClose,
> > + &SmmAccessPeiLock,
> > + &SmmAccessPeiGetCapabilities
> > +};
> > +
> > +
> > +STATIC EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {
> > + {
> > + EFI_PEI_PPI_DESCRIPTOR_PPI |
> > EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
> > + &gPeiSmmAccessPpiGuid, &mAccess
> > + }
> > +};
> > +
> > +
> > +//
> > +// Utility functions.
> > +//
> > +STATIC
> > +UINT8
> > +CmosRead8 (
> > + IN UINT8 Index
> > + )
> > +{
> > + IoWrite8 (0x70, Index);
> > + return IoRead8 (0x71);
> > +}
> > +
> > +STATIC
> > +UINT32
> > +GetSystemMemorySizeBelow4gb (
> > + VOID
> > + )
> > +{
> > + UINT32 Cmos0x34;
> > + UINT32 Cmos0x35;
> > +
> > + Cmos0x34 = CmosRead8 (0x34);
> > + Cmos0x35 = CmosRead8 (0x35);
> > +
> > + return ((Cmos0x35 << 8 | Cmos0x34) << 16) + SIZE_16MB;
> > +}
> > +
> > +
> > +//
> > +// Entry point of this driver.
> > +//
> > +EFI_STATUS
> > +EFIAPI
> > +SmmAccessPeiEntryPoint (
> > + IN EFI_PEI_FILE_HANDLE FileHandle,
> > + IN CONST EFI_PEI_SERVICES **PeiServices
> > + )
> > +{
> > + UINT16 HostBridgeDevId;
> > + UINT32 EsmramcVal;
> > + UINT32 TopOfLowRam, TopOfLowRamMb;
> > + EFI_STATUS Status;
> > + UINTN SmramMapSize;
> > + EFI_SMRAM_DESCRIPTOR SmramMap[DescIdxCount];
> > + VOID *GuidHob;
> > +
> > + //
> > + // This module should only be included if SMRAM support is required.
> > + //
> > + ASSERT (FeaturePcdGet (PcdSmmSmramRequire));
> > +
> > + //
> > + // Verify if we're running on a X58 machine type.
> > + //
> > + HostBridgeDevId = PciRead16 (SIMICS_HOSTBRIDGE_DID);
> > + if (HostBridgeDevId != INTEL_ICH10_DEVICE_ID) {
> > + DEBUG ((EFI_D_ERROR, "%a: no SMRAM with host bridge DID=0x%04x;
> only
> > "
> > + "DID=0x%04x (X58) is supported\n", __FUNCTION__, HostBridgeDevId,
> > + INTEL_ICH10_DEVICE_ID));
> > + goto WrongConfig;
> > + }
> > +
> > + //
> > + // Confirm if QEMU supports SMRAM.
> > + //
> > + // With no support for it, the ESMRAMC (Extended System Management
> RAM
> > + // Control) register reads as zero. If there is support, the cache-enable
> > + // bits are hard-coded as 1 by QEMU.
> > + //
> > +
> > + TopOfLowRam = GetSystemMemorySizeBelow4gb ();
> > + ASSERT ((TopOfLowRam & (SIZE_1MB - 1)) == 0);
> > + TopOfLowRamMb = TopOfLowRam >> 20;
> > + DEBUG((EFI_D_ERROR, "TopOfLowRam =0x%x; TopOfLowRamMb =0x%x
> > \n", TopOfLowRam, TopOfLowRamMb));
> > +
> > +
> > + //
> > + // Set Top of Low Usable DRAM.
> > + //
> > + PciWrite32 (DRAMC_REGISTER_X58(MCH_TOLUD),
> > + TopOfLowRam);
> > + DEBUG((EFI_D_ERROR, "MCH_TOLUD =0x%x; \n",
> > PciRead32(DRAMC_REGISTER_X58(MCH_TOLUD))));
> > +
> > + //
> > + // Set TSEG Memory Base.
> > + //
> > + EsmramcVal = (TopOfLowRamMb - FixedPcdGet8(PcdX58TsegMbytes)) <<
> > MCH_TSEGMB_MB_SHIFT;
> > + //
> > + // Set TSEG size, and disable TSEG visibility outside of SMM. Note that the
> > + // T_EN bit has inverse meaning; when T_EN is set, then TSEG visibility is
> > + // *restricted* to SMM.
> > + //
> > + EsmramcVal &= ~(UINT32)MCH_ESMRAMC_TSEG_MASK;
> > + EsmramcVal |= FixedPcdGet8 (PcdX58TsegMbytes) == 8 ?
> > MCH_ESMRAMC_TSEG_8MB :
> > + FixedPcdGet8 (PcdX58TsegMbytes) == 2 ?
> > MCH_ESMRAMC_TSEG_2MB :
> > + MCH_ESMRAMC_TSEG_1MB;
> > + EsmramcVal |= MCH_ESMRAMC_T_EN;
> > + PciWrite32(DRAMC_REGISTER_X58(MCH_TSEGMB), EsmramcVal);
> > + DEBUG((EFI_D_ERROR, "MCH_TSEGMB =0x%x; \n",
> > PciRead32(DRAMC_REGISTER_X58(MCH_TSEGMB))));
> > + DEBUG((EFI_D_ERROR, "MCH_TSEGMB_1 =0x%x; MCH_TSEGMB_2
> > =0x%x;\n", ((TopOfLowRamMb - FixedPcdGet8(PcdX58TsegMbytes)) <<
> > MCH_TSEGMB_MB_SHIFT), EsmramcVal));
> > +
> > + //
> > + // Create the GUID HOB and point it to the first SMRAM range.
> > + //
> > + GetStates (&mAccess.LockState, &mAccess.OpenState);
> > + SmramMapSize = sizeof SmramMap;
> > + Status = SmramAccessGetCapabilities (mAccess.LockState,
> > mAccess.OpenState,
> > + &SmramMapSize, SmramMap);
> > + ASSERT_EFI_ERROR (Status);
> > +
> > + DEBUG_CODE_BEGIN ();
> > + {
> > + UINTN Count;
> > + UINTN Idx;
> > +
> > + Count = SmramMapSize / sizeof SmramMap[0];
> > + DEBUG ((EFI_D_VERBOSE, "%a: SMRAM map follows, %d entries\n",
> > __FUNCTION__,
> > + (INT32)Count));
> > + DEBUG ((EFI_D_VERBOSE, "% 20a % 20a % 20a % 20a\n",
> > "PhysicalStart(0x)",
> > + "PhysicalSize(0x)", "CpuStart(0x)", "RegionState(0x)"));
> > + for (Idx = 0; Idx < Count; ++Idx) {
> > + DEBUG ((EFI_D_VERBOSE, "% 20Lx % 20Lx % 20Lx % 20Lx\n",
> > + SmramMap[Idx].PhysicalStart, SmramMap[Idx].PhysicalSize,
> > + SmramMap[Idx].CpuStart, SmramMap[Idx].RegionState));
> > + }
> > + }
> > + DEBUG_CODE_END ();
> > +
> > + GuidHob = BuildGuidHob (&gEfiAcpiVariableGuid,
> > + sizeof SmramMap[DescIdxSmmS3ResumeState]);
> > + if (GuidHob == NULL) {
> > + return EFI_OUT_OF_RESOURCES;
> > + }
> > +
> > + CopyMem (GuidHob, &SmramMap[DescIdxSmmS3ResumeState],
> > + sizeof SmramMap[DescIdxSmmS3ResumeState]);
> > +
> > + //
> > + // We're done. The next step should succeed, but even if it fails, we can't
> > + // roll back the above BuildGuidHob() allocation, because PEI doesn't
> support
> > + // releasing memory.
> > + //
> > + return PeiServicesInstallPpi (mPpiList);
> > +
> > +WrongConfig:
> > + //
> > + // We really don't want to continue in this case.
> > + //
> > + ASSERT (FALSE);
> > + CpuDeadLoop ();
> > + return EFI_UNSUPPORTED;
> > +}
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
> > new file mode 100644
> > index 0000000000..898fc25084
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
> > @@ -0,0 +1,199 @@
> > +/** @file
> > + Functions and types shared by the SMM accessor PEI and DXE modules.
> > +
> > + Copyright (C) 2015, Red Hat, Inc.
> > +
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> > +**/
> > +
> > +#include <Guid/AcpiS3Context.h>
> > +#include <IndustryStandard/X58Ich10.h>
> > +#include <Library/DebugLib.h>
> > +#include <Library/PciLib.h>
> > +
> > +#include "SmramInternal.h"
> > +
> > +BOOLEAN gLockState;
> > +BOOLEAN gOpenState;
> > +
> > +/**
> > + Read the MCH_SMRAM and ESMRAMC registers, and update the
> LockState
> > and
> > + OpenState fields in the PEI_SMM_ACCESS_PPI /
> > EFI_SMM_ACCESS2_PROTOCOL object,
> > + from the D_LCK and T_EN bits.
> > +
> > + PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member
> > functions can rely on
> > + the LockState and OpenState fields being up-to-date on entry, and they
> need
> > + to restore the same invariant on exit, if they touch the bits in question.
> > +
> > + @param[out] LockState Reflects the D_LCK bit on output; TRUE iff
> SMRAM is
> > + locked.
> > + @param[out] OpenState Reflects the inverse of the T_EN bit on output;
> TRUE
> > + iff SMRAM is open.
> > +**/
> > +VOID
> > +GetStates (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > +)
> > +{
> > + UINT8 EsmramcVal;
> > +
> > + EsmramcVal = PciRead8(DRAMC_REGISTER_X58(MCH_TSEGMB));
> > +
> > + *OpenState = !(EsmramcVal & MCH_ESMRAMC_T_EN);
> > + *LockState = !*OpenState;
> > +
> > + *OpenState = gOpenState;
> > + *LockState = gLockState;
> > +}
> > +
> > +//
> > +// The functions below follow the PEI_SMM_ACCESS_PPI and
> > +// EFI_SMM_ACCESS2_PROTOCOL member declarations. The PeiServices
> and
> > This
> > +// pointers are removed (TSEG doesn't depend on them), and so is the
> > +// DescriptorIndex parameter (TSEG doesn't support range-wise locking).
> > +//
> > +// The LockState and OpenState members that are common to both
> > +// PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL are taken
> and
> > updated in
> > +// isolation from the rest of the (non-shared) members.
> > +//
> > +
> > +EFI_STATUS
> > +SmramAccessOpen (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > + )
> > +{
> > +
> > + //
> > + // Open TSEG by clearing T_EN.
> > + //
> > + PciAnd8(DRAMC_REGISTER_X58(MCH_TSEGMB),
> > + (UINT8)((~(UINT32)MCH_ESMRAMC_T_EN) & 0xff));
> > +
> > + gOpenState = TRUE;
> > + gLockState = !gOpenState;
> > +
> > + GetStates (LockState, OpenState);
> > + if (!*OpenState) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +SmramAccessClose (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > + )
> > +{
> > + //
> > + // Close TSEG by setting T_EN.
> > + //
> > + PciOr8(DRAMC_REGISTER_X58(MCH_TSEGMB), MCH_ESMRAMC_T_EN);
> > +
> > + gOpenState = FALSE;
> > + gLockState = !gOpenState;
> > +
> > + GetStates (LockState, OpenState);
> > + if (*OpenState) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +SmramAccessLock (
> > + OUT BOOLEAN *LockState,
> > + IN OUT BOOLEAN *OpenState
> > + )
> > +{
> > + if (*OpenState) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > +
> > + //
> > + // Close & lock TSEG by setting T_EN and D_LCK.
> > + //
> > + PciOr8 (DRAMC_REGISTER_X58(MCH_TSEGMB), MCH_ESMRAMC_T_EN);
> > +
> > + gOpenState = FALSE;
> > + gLockState = !gOpenState;
> > +
> > + GetStates (LockState, OpenState);
> > + if (*OpenState || !*LockState) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +SmramAccessGetCapabilities (
> > + IN BOOLEAN LockState,
> > + IN BOOLEAN OpenState,
> > + IN OUT UINTN *SmramMapSize,
> > + IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
> > + )
> > +{
> > + UINTN OriginalSize;
> > + UINT32 TsegMemoryBaseMb, TsegMemoryBase;
> > + UINT64 CommonRegionState;
> > + UINT8 TsegSizeBits;
> > +
> > + OriginalSize = *SmramMapSize;
> > + *SmramMapSize = DescIdxCount * sizeof *SmramMap;
> > + if (OriginalSize < *SmramMapSize) {
> > + return EFI_BUFFER_TOO_SMALL;
> > + }
> > +
> > + //
> > + // Read the TSEG Memory Base register.
> > + //
> > + TsegMemoryBaseMb =
> PciRead32(DRAMC_REGISTER_X58(MCH_TSEGMB));
> > +
> > + TsegMemoryBaseMb = 0xDF800000;
> > +
> > + TsegMemoryBase = (TsegMemoryBaseMb >> MCH_TSEGMB_MB_SHIFT)
> <<
> > 20;
> > +
> > + //
> > + // Precompute the region state bits that will be set for all regions.
> > + //
> > + CommonRegionState = (OpenState ? EFI_SMRAM_OPEN :
> > EFI_SMRAM_CLOSED) |
> > + (LockState ? EFI_SMRAM_LOCKED : 0) |
> > + EFI_CACHEABLE;
> > +
> > + //
> > + // The first region hosts an SMM_S3_RESUME_STATE object. It is located
> at
> > the
> > + // start of TSEG. We round up the size to whole pages, and we report it as
> > + // EFI_ALLOCATED, so that the SMM_CORE stays away from it.
> > + //
> > + SmramMap[DescIdxSmmS3ResumeState].PhysicalStart =
> TsegMemoryBase;
> > + SmramMap[DescIdxSmmS3ResumeState].CpuStart =
> TsegMemoryBase;
> > + SmramMap[DescIdxSmmS3ResumeState].PhysicalSize =
> > + EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (sizeof
> > (SMM_S3_RESUME_STATE)));
> > + SmramMap[DescIdxSmmS3ResumeState].RegionState =
> > + CommonRegionState | EFI_ALLOCATED;
> > +
> > + //
> > + // Get the TSEG size bits from the ESMRAMC register.
> > + //
> > + TsegSizeBits = PciRead8 (DRAMC_REGISTER_X58(MCH_TSEGMB)) &
> > + MCH_ESMRAMC_TSEG_MASK;
> > +
> > + TsegSizeBits = MCH_ESMRAMC_TSEG_8MB;
> > +
> > + //
> > + // The second region is the main one, following the first.
> > + //
> > + SmramMap[DescIdxMain].PhysicalStart =
> > + SmramMap[DescIdxSmmS3ResumeState].PhysicalStart +
> > + SmramMap[DescIdxSmmS3ResumeState].PhysicalSize;
> > + SmramMap[DescIdxMain].CpuStart =
> > SmramMap[DescIdxMain].PhysicalStart;
> > + SmramMap[DescIdxMain].PhysicalSize =
> > + (TsegSizeBits == MCH_ESMRAMC_TSEG_8MB ? SIZE_8MB :
> > + TsegSizeBits == MCH_ESMRAMC_TSEG_2MB ? SIZE_2MB :
> > + SIZE_1MB) - SmramMap[DescIdxSmmS3ResumeState].PhysicalSize;
> > + SmramMap[DescIdxMain].RegionState = CommonRegionState;
> > +
> > + return EFI_SUCCESS;
> > +}
> > diff --git
> >
> a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry
> .n
> > asm
> >
> b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry
> .
> > nasm
> > new file mode 100644
> > index 0000000000..19ffb6f86d
> > --- /dev/null
> > +++
> >
> b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry
> .
> > nasm
> > @@ -0,0 +1,45 @@
> > +; @file
> > +; Copyright (c) 2006 - 2013 Intel Corporation. All rights reserved. <BR>
> > +;
> > +; SPDX-License-Identifier: BSD-2-Clause-Patent
> > +;
> > +
> > +#include <Base.h>
> > +
> > + SECTION .text
> > +
> > +extern ASM_PFX(SecCoreStartupWithStack)
> > +
> > +;
> > +; SecCore Entry Point
> > +;
> > +; Processor is in flat protected mode
> > +;
> > +; @param[in] EAX Initial value of the EAX register (BIST: Built-in Self Test)
> > +; @param[in] DI 'BP': boot-strap processor, or 'AP': application
> processor
> > +; @param[in] EBP Pointer to the start of the Boot Firmware Volume
> > +;
> > +; @return None This routine does not return
> > +;
> > +global ASM_PFX(_ModuleEntryPoint)
> > +ASM_PFX(_ModuleEntryPoint):
> > +
> > + ;
> > + ; Load temporary RAM stack based on PCDs
> > + ;
> > + %define SEC_TOP_OF_STACK (FixedPcdGet32
> > (PcdSimicsSecPeiTempRamBase) + \
> > + FixedPcdGet32 (PcdSimicsSecPeiTempRamSize))
> > + mov eax, SEC_TOP_OF_STACK
> > + mov esp, eax
> > + nop
> > +
> > + ;
> > + ; Setup parameters and call SecCoreStartupWithStack
> > + ; [esp] return address for call
> > + ; [esp+4] BootFirmwareVolumePtr
> > + ; [esp+8] TopOfCurrentStack
> > + ;
> > + push eax
> > + push ebp
> > + call ASM_PFX(SecCoreStartupWithStack)
> > +
> > diff --git
> > a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
> > b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
> > new file mode 100644
> > index 0000000000..ac993ac1ce
> > --- /dev/null
> > +++
> > b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
> > @@ -0,0 +1,71 @@
> > +## @file
> > +# SEC Driver
> > +#
> > +# Copyright (c) 2008 - 2018 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +[Defines]
> > + INF_VERSION = 0x00010005
> > + BASE_NAME = SecMain
> > + FILE_GUID = e67f156f-54c5-47f3-a35d-07c045881e14
> > + MODULE_TYPE = SEC
> > + VERSION_STRING = 1.0
> > + ENTRY_POINT = SecMain
> > +
> > +#
> > +# The following information is for reference only and not required by the
> build
> > tools.
> > +#
> > +# VALID_ARCHITECTURES = IA32 X64 EBC
> > +#
> > +
> > +[Sources]
> > + SecMain.c
> > +
> > +[Sources.IA32]
> > + Ia32/SecEntry.nasm
> > +
> > +[Sources.X64]
> > + X64/SecEntry.nasm
> > +
> > +[Packages]
> > + MdePkg/MdePkg.dec
> > + MdeModulePkg/MdeModulePkg.dec
> > + UefiCpuPkg/UefiCpuPkg.dec
> > + SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
> > +
> > +[LibraryClasses]
> > + BaseLib
> > + DebugLib
> > + BaseMemoryLib
> > + PeiServicesLib
> > + PcdLib
> > + UefiCpuLib
> > + DebugAgentLib
> > + IoLib
> > + PeCoffLib
> > + PeCoffGetEntryPointLib
> > + PeCoffExtraActionLib
> > + ExtractGuidedSectionLib
> > + LocalApicLib
> > + PciCf8Lib
> > +
> > +[Ppis]
> > + gEfiTemporaryRamSupportPpiGuid # PPI ALWAYS_PRODUCED
> > +
> > +[Pcd]
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsPeiMemFvBase
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsPeiMemFvSize
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsDxeMemFvBase
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsDxeMemFvSize
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPageTablesBase
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPeiTempRamBase
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPeiTempRamSize
> > + gEfiMdePkgTokenSpaceGuid.PcdGuidedExtractHandlerTableAddress
> > + gSimicsX58PkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
> > + gSimicsX58PkgTokenSpaceGuid.PcdSimicsDecompressionScratchEnd
> > +
> > +[FeaturePcd]
> > + gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
> > diff --git
> >
> a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.
> n
> > asm
> >
> b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.
> n
> > asm
> > new file mode 100644
> > index 0000000000..0eb86ec2ca
> > --- /dev/null
> > +++
> >
> b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.
> n
> > asm
> > @@ -0,0 +1,45 @@
> > +; @file
> > +; Copyright (c) 2006 - 2013 Intel Corporation. All rights reserved. <BR>
> > +;
> > +; SPDX-License-Identifier: BSD-2-Clause-Patent
> > +;
> > +
> > +#include <Base.h>
> > +
> > +DEFAULT REL
> > +SECTION .text
> > +
> > +extern ASM_PFX(SecCoreStartupWithStack)
> > +
> > +;
> > +; SecCore Entry Point
> > +;
> > +; Processor is in flat protected mode
> > +;
> > +; @param[in] RAX Initial value of the EAX register (BIST: Built-in Self Test)
> > +; @param[in] DI 'BP': boot-strap processor, or 'AP': application
> processor
> > +; @param[in] RBP Pointer to the start of the Boot Firmware Volume
> > +;
> > +; @return None This routine does not return
> > +;
> > +global ASM_PFX(_ModuleEntryPoint)
> > +ASM_PFX(_ModuleEntryPoint):
> > +
> > + ;
> > + ; Load temporary RAM stack based on PCDs
> > + ;
> > + %define SEC_TOP_OF_STACK (FixedPcdGet32
> > (PcdSimicsSecPeiTempRamBase) + \
> > + FixedPcdGet32 (PcdSimicsSecPeiTempRamSize))
> > + mov rsp, SEC_TOP_OF_STACK
> > + nop
> > +
> > + ;
> > + ; Setup parameters and call SecCoreStartupWithStack
> > + ; rcx: BootFirmwareVolumePtr
> > + ; rdx: TopOfCurrentStack
> > + ;
> > + mov rcx, rbp
> > + mov rdx, rsp
> > + sub rsp, 0x20
> > + call ASM_PFX(SecCoreStartupWithStack)
> > +
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
> > b/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
> > new file mode 100644
> > index 0000000000..0be8be4966
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
> > @@ -0,0 +1,18 @@
> > +## @file
> > +# Component description file for the SkyLake SiPkg PEI drivers.
> > +#
> > +# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > + #
> > + # SEC Phase modules
> > + #
> > + $(SKT_PKG)/Override/UefiCpuPkg/SecCore/SecMain.inf {
> > + <LibraryClasses>
> > +
> >
> NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDeco
> m
> > pressLib.inf
> > + }
> > + UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
> > + UefiCpuPkg/CpuMpPei/CpuMpPei.inf
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
> > b/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
> > new file mode 100644
> > index 0000000000..78eca21a43
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
> > @@ -0,0 +1,9 @@
> > +## @file
> > +# Component description file for the SkyLake SiPkg DXE drivers.
> > +#
> > +# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
> > b/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
> > new file mode 100644
> > index 0000000000..9f037e99d4
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
> > @@ -0,0 +1,10 @@
> > +## @file
> > +# Component description file for the SkyLake SiPkg PEI drivers.
> > +#
> > +# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +INF UefiCpuPkg/CpuMpPei/CpuMpPei.inf
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
> > b/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
> > new file mode 100644
> > index 0000000000..596d633cd3
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
> > @@ -0,0 +1,17 @@
> > +## @file
> > +# Component description file for the SkyLake SiPkg PEI drivers.
> > +#
> > +# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +#
> > +# SEC Phase modules
> > +#
> > +# The code in this FV handles the initial firmware startup, and
> > +# decompresses the PEI and DXE FVs which handles the rest of the boot
> > sequence.
> > +#
> > +INF RuleOverride=RESET_SECMAIN USE = IA32
> > $(SKT_PKG)/Override/UefiCpuPkg/SecCore/SecMain.inf
> > +INF RuleOverride=RESET_VECTOR USE = IA32
> > UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
> > b/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
> > new file mode 100644
> > index 0000000000..9004b9cb83
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
> > @@ -0,0 +1,16 @@
> > +## @file
> > +# Component description file for the SkyLake SiPkg DXE drivers.
> > +#
> > +# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +#INF
> $(SKT_PKG)/Override/IA32FamilyCpuPkg/CpuArchDxe/CpuArchDxe.inf
> > +#INF $(SKT_PKG)/Override/IA32FamilyCpuPkg/CpuMpDxe/CpuMpDxe.inf
> > +!if gMinPlatformPkgTokenSpaceGuid.PcdBootToShellOnly == FALSE
> > + INF $(SKT_PKG)/Smm/Access/SmmAccess2Dxe.inf
> > + INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> > +!endif
> > +INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
> > new file mode 100644
> > index 0000000000..2f630b4b95
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
> > @@ -0,0 +1,52 @@
> > +## @file
> > +# A DXE_DRIVER providing SMRAM access by producing
> > EFI_SMM_ACCESS2_PROTOCOL.
> > +#
> > +# X58 TSEG is expected to have been verified and set up by the
> SmmAccessPei
> > +# driver.
> > +#
> > +# Copyright (C) 2013, 2015, Red Hat, Inc.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +[Defines]
> > + INF_VERSION = 0x00010005
> > + BASE_NAME = SmmAccess2Dxe
> > + FILE_GUID = AC95AD3D-4366-44BF-9A62-E4B29D7A2206
> > + MODULE_TYPE = DXE_DRIVER
> > + VERSION_STRING = 1.0
> > + PI_SPECIFICATION_VERSION = 0x00010400
> > + ENTRY_POINT = SmmAccess2DxeEntryPoint
> > +
> > +#
> > +# The following information is for reference only and not required by the
> build
> > tools.
> > +#
> > +# VALID_ARCHITECTURES = IA32 X64
> > +#
> > +
> > +[Sources]
> > + SmmAccess2Dxe.c
> > + SmramInternal.c
> > + SmramInternal.h
> > +
> > +[Packages]
> > + MdeModulePkg/MdeModulePkg.dec
> > + MdePkg/MdePkg.dec
> > + SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
> > +
> > +[LibraryClasses]
> > + DebugLib
> > + PcdLib
> > + PciLib
> > + UefiBootServicesTableLib
> > + UefiDriverEntryPoint
> > +
> > +[Protocols]
> > + gEfiSmmAccess2ProtocolGuid ## PRODUCES
> > +
> > +[FeaturePcd]
> > + gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
> > +
> > +[Depex]
> > + TRUE
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
> > new file mode 100644
> > index 0000000000..1d3b028c85
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
> > @@ -0,0 +1,64 @@
> > +## @file
> > +# A PEIM with the following responsibilities:
> > +#
> > +# - provide SMRAM access by producing PEI_SMM_ACCESS_PPI,
> > +# - verify & configure the X58 TSEG in the entry point,
> > +# - set aside the SMM_S3_RESUME_STATE object at the bottom of TSEG,
> and
> > expose
> > +# it via the gEfiAcpiVariableGuid GUIDed HOB.
> > +#
> > +# Copyright (C) 2013, 2015, Red Hat, Inc.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +[Defines]
> > + INF_VERSION = 0x00010005
> > + BASE_NAME = SmmAccessPei
> > + FILE_GUID = 6C0E75B4-B0B9-44D1-8210-3377D7B4E066
> > + MODULE_TYPE = PEIM
> > + VERSION_STRING = 1.0
> > + ENTRY_POINT = SmmAccessPeiEntryPoint
> > +
> > +#
> > +# The following information is for reference only and not required by the
> build
> > tools.
> > +#
> > +# VALID_ARCHITECTURES = IA32 X64
> > +#
> > +
> > +[Sources]
> > + SmmAccessPei.c
> > + SmramInternal.c
> > + SmramInternal.h
> > +
> > +[Packages]
> > + MdeModulePkg/MdeModulePkg.dec
> > + MdePkg/MdePkg.dec
> > + SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
> > + OvmfPkg/OvmfPkg.dec
> > +
> > +[Guids]
> > + gEfiAcpiVariableGuid
> > +
> > +[LibraryClasses]
> > + BaseLib
> > + BaseMemoryLib
> > + DebugLib
> > + HobLib
> > + IoLib
> > + PcdLib
> > + PciLib
> > + PeiServicesLib
> > + PeimEntryPoint
> > +
> > +[FeaturePcd]
> > + gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
> > +
> > +[FixedPcd]
> > + gSimicsX58PkgTokenSpaceGuid.PcdX58TsegMbytes
> > +
> > +[Ppis]
> > + gPeiSmmAccessPpiGuid ## PRODUCES
> > +
> > +[Depex]
> > + gEfiPeiMemoryDiscoveredPpiGuid
> > diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
> > b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
> > new file mode 100644
> > index 0000000000..43a79b295f
> > --- /dev/null
> > +++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
> > @@ -0,0 +1,81 @@
> > +/** @file
> > + Functions and types shared by the SMM accessor PEI and DXE modules.
> > +
> > + Copyright (C) 2015, Red Hat, Inc.
> > +
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> > +**/
> > +
> > +#include <Pi/PiMultiPhase.h>
> > +
> > +//
> > +// We'll have two SMRAM ranges.
> > +//
> > +// The first is a tiny one that hosts an SMM_S3_RESUME_STATE object, to
> be
> > +// filled in by the CPU SMM driver during normal boot, for the PEI instance
> of
> > +// the LockBox library (which will rely on the object during S3 resume).
> > +//
> > +// The other SMRAM range is the main one, for the SMM core and the
> SMM
> > drivers.
> > +//
> > +typedef enum {
> > + DescIdxSmmS3ResumeState = 0,
> > + DescIdxMain = 1,
> > + DescIdxCount = 2
> > +} DESCRIPTOR_INDEX;
> > +
> > +/**
> > + Read the MCH_SMRAM and ESMRAMC registers, and update the
> LockState
> > and
> > + OpenState fields in the PEI_SMM_ACCESS_PPI /
> > EFI_SMM_ACCESS2_PROTOCOL object,
> > + from the D_LCK and T_EN bits.
> > +
> > + PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member
> > functions can rely on
> > + the LockState and OpenState fields being up-to-date on entry, and they
> need
> > + to restore the same invariant on exit, if they touch the bits in question.
> > +
> > + @param[out] LockState Reflects the D_LCK bit on output; TRUE iff
> SMRAM is
> > + locked.
> > + @param[out] OpenState Reflects the inverse of the T_EN bit on output;
> TRUE
> > + iff SMRAM is open.
> > +**/
> > +VOID
> > +GetStates (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > + );
> > +
> > +//
> > +// The functions below follow the PEI_SMM_ACCESS_PPI and
> > +// EFI_SMM_ACCESS2_PROTOCOL member declarations. The PeiServices
> and
> > This
> > +// pointers are removed (TSEG doesn't depend on them), and so is the
> > +// DescriptorIndex parameter (TSEG doesn't support range-wise locking).
> > +//
> > +// The LockState and OpenState members that are common to both
> > +// PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL are taken
> and
> > updated in
> > +// isolation from the rest of the (non-shared) members.
> > +//
> > +
> > +EFI_STATUS
> > +SmramAccessOpen (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > + );
> > +
> > +EFI_STATUS
> > +SmramAccessClose (
> > + OUT BOOLEAN *LockState,
> > + OUT BOOLEAN *OpenState
> > + );
> > +
> > +EFI_STATUS
> > +SmramAccessLock (
> > + OUT BOOLEAN *LockState,
> > + IN OUT BOOLEAN *OpenState
> > + );
> > +
> > +EFI_STATUS
> > +SmramAccessGetCapabilities (
> > + IN BOOLEAN LockState,
> > + IN BOOLEAN OpenState,
> > + IN OUT UINTN *SmramMapSize,
> > + IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
> > + );
> > --
> > 2.16.2.windows.1
next prev parent reply other threads:[~2019-08-26 22:48 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 22:46 [edk2-platform patch 0/7] Add Initial QSP MinPlatform Pkg for SIMICS David Wei
2019-08-09 22:46 ` [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for SimicsX58 David Wei
2019-08-15 8:34 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-22 22:31 ` David Wei
2019-08-26 22:48 ` Kubacki, Michael A [this message]
2019-08-09 22:46 ` [edk2-platform patch 2/7] SimicsICH10Pkg: Add PCH Pkg for SimicsICH10 David Wei
2019-08-13 2:01 ` Nate DeSimone
2019-08-15 8:39 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 16:40 ` David Wei
2019-08-26 22:49 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 3/7] SimicsOpenBoardPkg: Add SimicsOpenBoardPkg and its modules David Wei
2019-08-15 18:35 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 16:57 ` David Wei
2019-08-26 23:13 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 4/7] SimicsOpenBoardPkg: Add DXE driver for Legacy Sio David Wei
2019-08-15 19:01 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 5/7] SimicsOpenBoardPkg: Add Overrides modules for SIMICS QSP Platform David Wei
2019-08-15 19:38 ` Nate DeSimone
2019-08-15 22:28 ` Nate DeSimone
2019-08-15 22:52 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:09 ` David Wei
2019-08-26 22:51 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 6/7] SimicsOpenBoardPkg: Add board module for QSP Build tip David Wei
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:04 ` David Wei
2019-08-26 22:59 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 7/7] Platform/Intel: Add build option for SIMICS QSP Platform David Wei
2019-08-15 19:28 ` Nate DeSimone
2019-08-19 23:21 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:06 ` David Wei
2019-08-26 23:00 ` Kubacki, Michael A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49AB4ACB9627B8468F29D589A27B745588A89908@ORSMSX121.amr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox