From: "Gao, Liming" <liming.gao@intel.com>
To: "Bi, Dandan" <dandan.bi@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Dong, Eric" <eric.dong@intel.com>
Subject: Re: [patch 2/2] MdeModulePkg/Browser: Share default if some default value are not specified
Date: Mon, 8 Aug 2016 04:57:26 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A1155E6204@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1470363196-81536-3-git-send-email-dandan.bi@intel.com>
Dandan:
I have two comments.
1) Why define EFI_HII_MAX_SUPPORT_DEFAULT_TYPE as 8?
2) Could we generate DefaultStoreListHead as ascending order? If so, don't need call GetDefaultIdArray() function for each default retrieve.
Thanks
Liming
> -----Original Message-----
> From: Bi, Dandan
> Sent: Friday, August 05, 2016 10:13 AM
> To: edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>
> Subject: [patch 2/2] MdeModulePkg/Browser: Share default if some default
> value are not specified
>
> Add a new implementation policy of getting default in SetupBrowser.
> The new policy is only for the situation that a question has default
> value but doesn't have default value for all supported default type.
> In this case, we will choose the smallest default id from the existing
> defaults, and share its value to other default id which has no
> default value.
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Dandan Bi <dandan.bi@intel.com>
> Reviewed-by: Eric Dong <eric.dong@intel.com>
> ---
> MdeModulePkg/Universal/SetupBrowserDxe/Setup.c | 66
> +++++++++++++++++++++++++-
> MdeModulePkg/Universal/SetupBrowserDxe/Setup.h | 5 ++
> 2 files changed, 70 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> index 6b38547..9473eb1 100644
> --- a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> +++ b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> @@ -4016,10 +4016,50 @@ ValueToOption (
> }
>
> return NULL;
> }
>
> +/**
> + This function is to get the default Id array, the default ids are in ascending
> order in the array.
> +
> + @param FormSet The form set.
> + @param DefaultIdArray Point to the default Id Array.
> +
> + @retval DefaultIdCount Return the default Id number in the array.
> +
> +**/
> +UINT16
> +GetDefaultIdArray (
> + IN FORM_BROWSER_FORMSET *FormSet,
> + IN OUT UINT16 *DefaultIdArray
> + )
> +{
> + FORMSET_DEFAULTSTORE *DefaultStore;
> + LIST_ENTRY *DefaultLink;
> + UINT16 DefaultIdCount;
> + UINT16 Index;
> +
> + DefaultIdCount = 0;
> +
> + DefaultLink = GetFirstNode (&FormSet->DefaultStoreListHead);
> + while (!IsNull (&FormSet->DefaultStoreListHead, DefaultLink)) {
> + DefaultStore = FORMSET_DEFAULTSTORE_FROM_LINK(DefaultLink);
> + Index = DefaultIdCount;
> + //
> + // Insert the DefaultId to the Array with ascending order.
> + //
> + while (Index > 0 && DefaultStore->DefaultId < DefaultIdArray[Index - 1])
> {
> + DefaultIdArray[Index] = DefaultIdArray[Index -1];
> + Index--;
> + }
> + DefaultIdArray[Index] = DefaultStore->DefaultId;
> + DefaultLink = GetNextNode (&FormSet->DefaultStoreListHead,
> DefaultLink);
> + DefaultIdCount++;
> + }
> +
> + return DefaultIdCount;
> +}
>
> /**
> Reset Question to its default value.
>
> @param FormSet The form set.
> @@ -4048,29 +4088,38 @@ GetQuestionDefault (
> EFI_HII_CONFIG_ACCESS_PROTOCOL *ConfigAccess;
> EFI_BROWSER_ACTION_REQUEST ActionRequest;
> INTN Action;
> CHAR16 *NewString;
> EFI_IFR_TYPE_VALUE *TypeValue;
> + UINT16 DefaultIdNumber;
> + UINT16
> DefaultIdArray[EFI_HII_MAX_SUPPORT_DEFAULT_TYPE];
> + UINT16 ReGetCount;
> + UINT16 OriginalDefaultId;
>
> Status = EFI_NOT_FOUND;
> StrValue = NULL;
> + ReGetCount = 0;
> + OriginalDefaultId = DefaultId;
>
> //
> // Statement don't have storage, skip them
> //
> if (Question->QuestionId == 0) {
> return Status;
> }
>
> + DefaultIdNumber = GetDefaultIdArray (FormSet, DefaultIdArray);
> +
> //
> // There are Five ways to specify default value for a Question:
> // 1, use call back function (highest priority)
> // 2, use ExtractConfig function
> // 3, use nested EFI_IFR_DEFAULT
> // 4, set flags of EFI_ONE_OF_OPTION (provide Standard and
> Manufacturing default)
> // 5, set flags of EFI_IFR_CHECKBOX (provide Standard and Manufacturing
> default) (lowest priority)
> //
> +ReGetDefault:
> HiiValue = &Question->HiiValue;
> TypeValue = &HiiValue->Value;
> if (HiiValue->Type == EFI_IFR_TYPE_BUFFER) {
> //
> // For orderedlist, need to pass the BufferValue to Callback function.
> @@ -4233,11 +4282,26 @@ GetQuestionDefault (
> return EFI_SUCCESS;
> }
> }
>
> //
> - // For Questions without default
> + // For question without default value for current default Id, we try to re-
> get the default value form other default id in the DefaultIdArray.
> + // If get, will exit the function, if not, will choose next default id in the
> DefaultIdArray.
> + // The default id in DefaultIdArray are in ascending order to make sure
> choose the smallest default id every time.
> + //
> + while (ReGetCount < DefaultIdNumber) {
> + DefaultId = DefaultIdArray[ReGetCount];
> + if (DefaultId == OriginalDefaultId) {
> + ReGetCount ++;
> + continue;
> + }
> + ReGetCount ++;
> + goto ReGetDefault;
> + }
> +
> + //
> + // For Questions without default value for all the default id in the
> DefaultIdArray.
> //
> Status = EFI_NOT_FOUND;
> switch (Question->Operand) {
> case EFI_IFR_NUMERIC_OP:
> //
> diff --git a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.h
> b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.h
> index cbc5401..21f392c 100644
> --- a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.h
> +++ b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.h
> @@ -61,10 +61,15 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF
> ANY KIND, EITHER EXPRESS OR IMPLIED.
> #define UI_ACTION_REFRESH_FORM 1
> #define UI_ACTION_REFRESH_FORMSET 2
> #define UI_ACTION_EXIT 3
>
> //
> +// The maximum number of default type
> +//
> +#define EFI_HII_MAX_SUPPORT_DEFAULT_TYPE 0x08
> +
> +//
> //
> // Time definitions
> //
> #define ONE_SECOND 10000000
>
> --
> 1.9.5.msysgit.1
prev parent reply other threads:[~2016-08-08 4:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-05 2:13 [patch 0/2] Share default value if some default value are not specified Dandan Bi
2016-08-05 2:13 ` [patch 1/2] MdeModulePkg/HiiDB: Share default " Dandan Bi
2016-08-05 2:13 ` [patch 2/2] MdeModulePkg/Browser: " Dandan Bi
2016-08-08 4:57 ` Gao, Liming [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A1155E6204@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox