From: "Gao, Liming" <liming.gao@intel.com>
To: "Bi, Dandan" <dandan.bi@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Dong, Eric" <eric.dong@intel.com>
Subject: Re: [PATCH v2] MdeModulePkg/Browser: Enhance the logic when getting value from AltResp
Date: Thu, 11 Aug 2016 10:52:28 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A1155EA3AF@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1470909250-104752-1-git-send-email-dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Dandan Bi
> Sent: Thursday, August 11, 2016 5:54 PM
> To: edk2-devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [PATCH v2] MdeModulePkg/Browser: Enhance the logic
> when getting value from AltResp
>
> This patch is to enhance SetupBrowser to handle following two cases:
> 1. When searching BlockName in AltResp, the hex digits of related
> BlockName
> in AltResp may be in uppercase.
> 2. When converting the Value in AltResp to HiiValue, the length of value
> string is bigger than the length of StorageWidth of the question.
>
> Notes:
> V2:
> - Add some comments to make the logic clear.
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Dandan Bi <dandan.bi@intel.com>
> Reviewed-by: Eric Dong <eric.dong@intel.com>
> ---
> MdeModulePkg/Universal/SetupBrowserDxe/Setup.c | 61
> +++++++++++++++-----------
> 1 file changed, 35 insertions(+), 26 deletions(-)
>
> diff --git a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> index 66c4313..cd3c8cc 100644
> --- a/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> +++ b/MdeModulePkg/Universal/SetupBrowserDxe/Setup.c
> @@ -1427,44 +1427,48 @@ BufferToValue (
> }
> TempChar = *StringPtr;
> *StringPtr = L'\0';
>
> LengthStr = StrLen (Value);
> +
> + //
> + // Value points to a Unicode hexadecimal string, we need to convert the
> string to the value with CHAR16/UINT8...type.
> + // When generating the Value string, we follow this rule: 1 byte -> 2
> Unicode characters (for string: 2 byte(CHAR16) ->4 Unicode characters).
> + // So the maximum value string length of a question is : Question-
> >StorageWidth * 2.
> + // If the value string length > Question->StorageWidth * 2, only set the
> string length as Question->StorageWidth * 2, then convert.
> + //
> + if (LengthStr > (UINTN) Question->StorageWidth * 2) {
> + Length = (UINTN) Question->StorageWidth * 2;
> + } else {
> + Length = LengthStr;
> + }
> +
> Status = EFI_SUCCESS;
> if (!IsBufferStorage && IsString) {
> //
> // Convert Config String to Unicode String, e.g "0041004200430044" =>
> "ABCD"
> // Add string tail char L'\0' into Length
> //
> - Length = Question->StorageWidth + sizeof (CHAR16);
> - if (Length < ((LengthStr / 4 + 1) * 2)) {
> - Status = EFI_BUFFER_TOO_SMALL;
> - } else {
> - DstBuf = (CHAR16 *) Dst;
> - ZeroMem (TemStr, sizeof (TemStr));
> - for (Index = 0; Index < LengthStr; Index += 4) {
> - StrnCpyS (TemStr, sizeof (TemStr) / sizeof (CHAR16), Value + Index, 4);
> - DstBuf[Index/4] = (CHAR16) StrHexToUint64 (TemStr);
> - }
> - //
> - // Add tailing L'\0' character
> - //
> - DstBuf[Index/4] = L'\0';
> + DstBuf = (CHAR16 *) Dst;
> + ZeroMem (TemStr, sizeof (TemStr));
> + for (Index = 0; Index < Length; Index += 4) {
> + StrnCpyS (TemStr, sizeof (TemStr) / sizeof (CHAR16), Value + Index, 4);
> + DstBuf[Index/4] = (CHAR16) StrHexToUint64 (TemStr);
> }
> + //
> + // Add tailing L'\0' character
> + //
> + DstBuf[Index/4] = L'\0';
> } else {
> - if (Question->StorageWidth < ((LengthStr + 1) / 2)) {
> - Status = EFI_BUFFER_TOO_SMALL;
> - } else {
> - ZeroMem (TemStr, sizeof (TemStr));
> - for (Index = 0; Index < LengthStr; Index ++) {
> - TemStr[0] = Value[LengthStr - Index - 1];
> - DigitUint8 = (UINT8) StrHexToUint64 (TemStr);
> - if ((Index & 1) == 0) {
> - Dst [Index/2] = DigitUint8;
> - } else {
> - Dst [Index/2] = (UINT8) ((DigitUint8 << 4) + Dst [Index/2]);
> - }
> + ZeroMem (TemStr, sizeof (TemStr));
> + for (Index = 0; Index < Length; Index ++) {
> + TemStr[0] = Value[LengthStr - Index - 1];
> + DigitUint8 = (UINT8) StrHexToUint64 (TemStr);
> + if ((Index & 1) == 0) {
> + Dst [Index/2] = DigitUint8;
> + } else {
> + Dst [Index/2] = (UINT8) ((DigitUint8 << 4) + Dst [Index/2]);
> }
> }
> }
>
> *StringPtr = TempChar;
> @@ -3755,10 +3759,15 @@ GetOffsetFromConfigResp (
> //
> // Type is EFI_HII_VARSTORE_EFI_VARIABLE or
> EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER
> //
>
> //
> + // Convert all hex digits in ConfigResp to lower case before searching.
> + //
> + HiiToLower (ConfigResp);
> +
> + //
> // 1. Directly use Question->BlockName to find.
> //
> RequestElement = StrStr (ConfigResp, Question->BlockName);
> if (RequestElement != NULL) {
> //
> --
> 1.9.5.msysgit.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
prev parent reply other threads:[~2016-08-11 10:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 9:54 [PATCH v2] MdeModulePkg/Browser: Enhance the logic when getting value from AltResp Dandan Bi
2016-08-11 10:52 ` Gao, Liming [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A1155EA3AF@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox