* [Patch] BaseTools: Change source files to DOS format
@ 2016-09-01 9:14 Yonghong Zhu
2016-09-02 0:17 ` Gao, Liming
0 siblings, 1 reply; 2+ messages in thread
From: Yonghong Zhu @ 2016-09-01 9:14 UTC (permalink / raw)
To: edk2-devel; +Cc: Liming Gao
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
---
BaseTools/Source/C/GenFv/GenFvInternalLib.c | 12 +-
BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py | 564 ++++++++++++-------------
2 files changed, 288 insertions(+), 288 deletions(-)
diff --git a/BaseTools/Source/C/GenFv/GenFvInternalLib.c b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
index 123e355..fab7c94 100644
--- a/BaseTools/Source/C/GenFv/GenFvInternalLib.c
+++ b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
@@ -2768,17 +2768,17 @@ Returns:
}
if (!mArm) {
//
// Update reset vector (SALE_ENTRY for IPF)
// Now for IA32 and IA64 platform, the fv which has bsf file must have the
- // EndAddress of 0xFFFFFFFF (unless the section was rebased).
- // Thus, only this type fv needs to update the reset vector.
- // If the PEI Core is found, the VTF file will probably get
- // corrupted by updating the entry point.
+ // EndAddress of 0xFFFFFFFF (unless the section was rebased).
+ // Thus, only this type fv needs to update the reset vector.
+ // If the PEI Core is found, the VTF file will probably get
+ // corrupted by updating the entry point.
//
- if (mFvDataInfo.ForceRebase == 1 ||
- (mFvDataInfo.BaseAddress + mFvDataInfo.Size) == FV_IMAGES_TOP_ADDRESS) {
+ if (mFvDataInfo.ForceRebase == 1 ||
+ (mFvDataInfo.BaseAddress + mFvDataInfo.Size) == FV_IMAGES_TOP_ADDRESS) {
Status = UpdateResetVector (&FvImageMemoryFile, &mFvDataInfo, VtfFileImage);
if (EFI_ERROR(Status)) {
Error (NULL, 0, 3000, "Invalid", "Could not update the reset vector.");
goto Finish;
}
diff --git a/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py b/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
index 1998d6c..c1977d6 100644
--- a/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
+++ b/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
@@ -1,282 +1,282 @@
-## @file
-# This tool adds EFI_FIRMWARE_IMAGE_AUTHENTICATION for a binary.
-#
-# This tool only support CertType - EFI_CERT_TYPE_PKCS7_GUID
-# {0x4aafd29d, 0x68df, 0x49ee, {0x8a, 0xa9, 0x34, 0x7d, 0x37, 0x56, 0x65, 0xa7}}
-#
-# This tool has been tested with OpenSSL.
-#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-'''
-Pkcs7Sign
-'''
-
-import os
-import sys
-import argparse
-import subprocess
-import uuid
-import struct
-import collections
-from Common.BuildVersion import gBUILD_VERSION
-
-#
-# Globals for help information
-#
-__prog__ = 'Pkcs7Sign'
-__version__ = '%s Version %s' % (__prog__, '0.9 ' + gBUILD_VERSION)
-__copyright__ = 'Copyright (c) 2016, Intel Corporation. All rights reserved.'
-__usage__ = '%s -e|-d [options] <input_file>' % (__prog__)
-
-#
-# GUID for PKCS7 from UEFI Specification
-#
-WIN_CERT_REVISION = 0x0200
-WIN_CERT_TYPE_EFI_GUID = 0x0EF1
-EFI_CERT_TYPE_PKCS7_GUID = uuid.UUID('{4aafd29d-68df-49ee-8aa9-347d375665a7}')
-
-#
-# typedef struct _WIN_CERTIFICATE {
-# UINT32 dwLength;
-# UINT16 wRevision;
-# UINT16 wCertificateType;
-# //UINT8 bCertificate[ANYSIZE_ARRAY];
-# } WIN_CERTIFICATE;
-#
-# typedef struct _WIN_CERTIFICATE_UEFI_GUID {
-# WIN_CERTIFICATE Hdr;
-# EFI_GUID CertType;
-# //UINT8 CertData[ANYSIZE_ARRAY];
-# } WIN_CERTIFICATE_UEFI_GUID;
-#
-# typedef struct {
-# UINT64 MonotonicCount;
-# WIN_CERTIFICATE_UEFI_GUID AuthInfo;
-# } EFI_FIRMWARE_IMAGE_AUTHENTICATION;
-#
-
-#
-# Filename of test signing private cert that is stored in same directory as this tool
-#
-TEST_SIGNER_PRIVATE_CERT_FILENAME = 'TestCert.pem'
-TEST_OTHER_PUBLIC_CERT_FILENAME = 'TestSub.pub.pem'
-TEST_TRUSTED_PUBLIC_CERT_FILENAME = 'TestRoot.pub.pem'
-
-if __name__ == '__main__':
- #
- # Create command line argument parser object
- #
- parser = argparse.ArgumentParser(prog=__prog__, version=__version__, usage=__usage__, description=__copyright__, conflict_handler='resolve')
- group = parser.add_mutually_exclusive_group(required=True)
- group.add_argument("-e", action="store_true", dest='Encode', help='encode file')
- group.add_argument("-d", action="store_true", dest='Decode', help='decode file')
- parser.add_argument("-o", "--output", dest='OutputFile', type=str, metavar='filename', help="specify the output filename", required=True)
- parser.add_argument("--signer-private-cert", dest='SignerPrivateCertFile', type=argparse.FileType('rb'), help="specify the signer private cert filename. If not specified, a test signer private cert is used.")
- parser.add_argument("--other-public-cert", dest='OtherPublicCertFile', type=argparse.FileType('rb'), help="specify the other public cert filename. If not specified, a test other public cert is used.")
- parser.add_argument("--trusted-public-cert", dest='TrustedPublicCertFile', type=argparse.FileType('rb'), help="specify the trusted public cert filename. If not specified, a test trusted public cert is used.")
- parser.add_argument("--monotonic-count", dest='MonotonicCountStr', type=str, help="specify the MonotonicCount in FMP capsule. If not specified, 0 is used.")
- parser.add_argument("--signature-size", dest='SignatureSizeStr', type=str, help="specify the signature size for decode process.")
- parser.add_argument("-v", "--verbose", dest='Verbose', action="store_true", help="increase output messages")
- parser.add_argument("-q", "--quiet", dest='Quiet', action="store_true", help="reduce output messages")
- parser.add_argument("--debug", dest='Debug', type=int, metavar='[0-9]', choices=range(0,10), default=0, help="set debug level")
- parser.add_argument(metavar="input_file", dest='InputFile', type=argparse.FileType('rb'), help="specify the input filename")
-
- #
- # Parse command line arguments
- #
- args = parser.parse_args()
-
- #
- # Generate file path to Open SSL command
- #
- OpenSslCommand = 'openssl'
- try:
- OpenSslPath = os.environ['OPENSSL_PATH']
- OpenSslCommand = os.path.join(OpenSslPath, OpenSslCommand)
- except:
- pass
-
- #
- # Verify that Open SSL command is available
- #
- try:
- Process = subprocess.Popen('%s version' % (OpenSslCommand), stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- except:
- print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
- sys.exit(1)
-
- Version = Process.communicate()
- if Process.returncode <> 0:
- print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
- sys.exit(Process.returncode)
- print Version[0]
-
- #
- # Read input file into a buffer and save input filename
- #
- args.InputFileName = args.InputFile.name
- args.InputFileBuffer = args.InputFile.read()
- args.InputFile.close()
-
- #
- # Save output filename and check if path exists
- #
- OutputDir = os.path.dirname(args.OutputFile)
- if not os.path.exists(OutputDir):
- print 'ERROR: The output path does not exist: %s' % OutputDir
- sys.exit(1)
- args.OutputFileName = args.OutputFile
-
- try:
- if args.MonotonicCountStr.upper().startswith('0X'):
- args.MonotonicCountValue = (long)(args.MonotonicCountStr, 16)
- else:
- args.MonotonicCountValue = (long)(args.MonotonicCountStr)
- except:
- args.MonotonicCountValue = (long)(0)
-
- if args.Encode:
- #
- # Save signer private cert filename and close private cert file
- #
- try:
- args.SignerPrivateCertFileName = args.SignerPrivateCertFile.name
- args.SignerPrivateCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.SignerPrivateCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_SIGNER_PRIVATE_CERT_FILENAME)
- args.SignerPrivateCertFile = open(args.SignerPrivateCertFileName, 'rb')
- args.SignerPrivateCertFile.close()
- except:
- print 'ERROR: test signer private cert file %s missing' % (args.SignerPrivateCertFileName)
- sys.exit(1)
-
- #
- # Save other public cert filename and close public cert file
- #
- try:
- args.OtherPublicCertFileName = args.OtherPublicCertFile.name
- args.OtherPublicCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.OtherPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_OTHER_PUBLIC_CERT_FILENAME)
- args.OtherPublicCertFile = open(args.OtherPublicCertFileName, 'rb')
- args.OtherPublicCertFile.close()
- except:
- print 'ERROR: test other public cert file %s missing' % (args.OtherPublicCertFileName)
- sys.exit(1)
-
- format = "Q%ds" % len(args.InputFileBuffer)
- FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
-
- #
- # Sign the input file using the specified private key and capture signature from STDOUT
- #
- Process = subprocess.Popen('%s smime -sign -binary -signer "%s" -outform DER -md sha256 -certfile "%s"' % (OpenSslCommand, args.SignerPrivateCertFileName, args.OtherPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- Signature = Process.communicate(input=FullInputFileBuffer)[0]
- if Process.returncode <> 0:
- sys.exit(Process.returncode)
-
- #
- # Write output file that contains Signature, and Input data
- #
- args.OutputFile = open(args.OutputFileName, 'wb')
- args.OutputFile.write(Signature)
- args.OutputFile.write(args.InputFileBuffer)
- args.OutputFile.close()
-
- if args.Decode:
- #
- # Save trusted public cert filename and close public cert file
- #
- try:
- args.TrustedPublicCertFileName = args.TrustedPublicCertFile.name
- args.TrustedPublicCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.TrustedPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_TRUSTED_PUBLIC_CERT_FILENAME)
- args.TrustedPublicCertFile = open(args.TrustedPublicCertFileName, 'rb')
- args.TrustedPublicCertFile.close()
- except:
- print 'ERROR: test trusted public cert file %s missing' % (args.TrustedPublicCertFileName)
- sys.exit(1)
-
- if not args.SignatureSizeStr:
- print "ERROR: please use the option --signature-size to specify the size of the signature data!"
- sys.exit(1)
- else:
- if args.SignatureSizeStr.upper().startswith('0X'):
- SignatureSize = (long)(args.SignatureSizeStr, 16)
- else:
- SignatureSize = (long)(args.SignatureSizeStr)
- if SignatureSize < 0:
- print "ERROR: The value of option --signature-size can't be set to negative value!"
- sys.exit(1)
- elif SignatureSize > len(args.InputFileBuffer):
- print "ERROR: The value of option --signature-size is exceed the size of the input file !"
- sys.exit(1)
-
- args.SignatureBuffer = args.InputFileBuffer[0:SignatureSize]
- args.InputFileBuffer = args.InputFileBuffer[SignatureSize:]
-
- format = "Q%ds" % len(args.InputFileBuffer)
- FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
-
- #
- # Save output file contents from input file
- #
- open(args.OutputFileName, 'wb').write(FullInputFileBuffer)
-
- #
- # Verify signature
- #
- Process = subprocess.Popen('%s smime -verify -inform DER -content %s -CAfile %s' % (OpenSslCommand, args.OutputFileName, args.TrustedPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- Process.communicate(input=args.SignatureBuffer)[0]
- if Process.returncode <> 0:
- print 'ERROR: Verification failed'
- os.remove (args.OutputFileName)
- sys.exit(Process.returncode)
-
- open(args.OutputFileName, 'wb').write(args.InputFileBuffer)
+## @file
+# This tool adds EFI_FIRMWARE_IMAGE_AUTHENTICATION for a binary.
+#
+# This tool only support CertType - EFI_CERT_TYPE_PKCS7_GUID
+# {0x4aafd29d, 0x68df, 0x49ee, {0x8a, 0xa9, 0x34, 0x7d, 0x37, 0x56, 0x65, 0xa7}}
+#
+# This tool has been tested with OpenSSL.
+#
+# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+'''
+Pkcs7Sign
+'''
+
+import os
+import sys
+import argparse
+import subprocess
+import uuid
+import struct
+import collections
+from Common.BuildVersion import gBUILD_VERSION
+
+#
+# Globals for help information
+#
+__prog__ = 'Pkcs7Sign'
+__version__ = '%s Version %s' % (__prog__, '0.9 ' + gBUILD_VERSION)
+__copyright__ = 'Copyright (c) 2016, Intel Corporation. All rights reserved.'
+__usage__ = '%s -e|-d [options] <input_file>' % (__prog__)
+
+#
+# GUID for PKCS7 from UEFI Specification
+#
+WIN_CERT_REVISION = 0x0200
+WIN_CERT_TYPE_EFI_GUID = 0x0EF1
+EFI_CERT_TYPE_PKCS7_GUID = uuid.UUID('{4aafd29d-68df-49ee-8aa9-347d375665a7}')
+
+#
+# typedef struct _WIN_CERTIFICATE {
+# UINT32 dwLength;
+# UINT16 wRevision;
+# UINT16 wCertificateType;
+# //UINT8 bCertificate[ANYSIZE_ARRAY];
+# } WIN_CERTIFICATE;
+#
+# typedef struct _WIN_CERTIFICATE_UEFI_GUID {
+# WIN_CERTIFICATE Hdr;
+# EFI_GUID CertType;
+# //UINT8 CertData[ANYSIZE_ARRAY];
+# } WIN_CERTIFICATE_UEFI_GUID;
+#
+# typedef struct {
+# UINT64 MonotonicCount;
+# WIN_CERTIFICATE_UEFI_GUID AuthInfo;
+# } EFI_FIRMWARE_IMAGE_AUTHENTICATION;
+#
+
+#
+# Filename of test signing private cert that is stored in same directory as this tool
+#
+TEST_SIGNER_PRIVATE_CERT_FILENAME = 'TestCert.pem'
+TEST_OTHER_PUBLIC_CERT_FILENAME = 'TestSub.pub.pem'
+TEST_TRUSTED_PUBLIC_CERT_FILENAME = 'TestRoot.pub.pem'
+
+if __name__ == '__main__':
+ #
+ # Create command line argument parser object
+ #
+ parser = argparse.ArgumentParser(prog=__prog__, version=__version__, usage=__usage__, description=__copyright__, conflict_handler='resolve')
+ group = parser.add_mutually_exclusive_group(required=True)
+ group.add_argument("-e", action="store_true", dest='Encode', help='encode file')
+ group.add_argument("-d", action="store_true", dest='Decode', help='decode file')
+ parser.add_argument("-o", "--output", dest='OutputFile', type=str, metavar='filename', help="specify the output filename", required=True)
+ parser.add_argument("--signer-private-cert", dest='SignerPrivateCertFile', type=argparse.FileType('rb'), help="specify the signer private cert filename. If not specified, a test signer private cert is used.")
+ parser.add_argument("--other-public-cert", dest='OtherPublicCertFile', type=argparse.FileType('rb'), help="specify the other public cert filename. If not specified, a test other public cert is used.")
+ parser.add_argument("--trusted-public-cert", dest='TrustedPublicCertFile', type=argparse.FileType('rb'), help="specify the trusted public cert filename. If not specified, a test trusted public cert is used.")
+ parser.add_argument("--monotonic-count", dest='MonotonicCountStr', type=str, help="specify the MonotonicCount in FMP capsule. If not specified, 0 is used.")
+ parser.add_argument("--signature-size", dest='SignatureSizeStr', type=str, help="specify the signature size for decode process.")
+ parser.add_argument("-v", "--verbose", dest='Verbose', action="store_true", help="increase output messages")
+ parser.add_argument("-q", "--quiet", dest='Quiet', action="store_true", help="reduce output messages")
+ parser.add_argument("--debug", dest='Debug', type=int, metavar='[0-9]', choices=range(0,10), default=0, help="set debug level")
+ parser.add_argument(metavar="input_file", dest='InputFile', type=argparse.FileType('rb'), help="specify the input filename")
+
+ #
+ # Parse command line arguments
+ #
+ args = parser.parse_args()
+
+ #
+ # Generate file path to Open SSL command
+ #
+ OpenSslCommand = 'openssl'
+ try:
+ OpenSslPath = os.environ['OPENSSL_PATH']
+ OpenSslCommand = os.path.join(OpenSslPath, OpenSslCommand)
+ except:
+ pass
+
+ #
+ # Verify that Open SSL command is available
+ #
+ try:
+ Process = subprocess.Popen('%s version' % (OpenSslCommand), stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ except:
+ print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
+ sys.exit(1)
+
+ Version = Process.communicate()
+ if Process.returncode <> 0:
+ print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
+ sys.exit(Process.returncode)
+ print Version[0]
+
+ #
+ # Read input file into a buffer and save input filename
+ #
+ args.InputFileName = args.InputFile.name
+ args.InputFileBuffer = args.InputFile.read()
+ args.InputFile.close()
+
+ #
+ # Save output filename and check if path exists
+ #
+ OutputDir = os.path.dirname(args.OutputFile)
+ if not os.path.exists(OutputDir):
+ print 'ERROR: The output path does not exist: %s' % OutputDir
+ sys.exit(1)
+ args.OutputFileName = args.OutputFile
+
+ try:
+ if args.MonotonicCountStr.upper().startswith('0X'):
+ args.MonotonicCountValue = (long)(args.MonotonicCountStr, 16)
+ else:
+ args.MonotonicCountValue = (long)(args.MonotonicCountStr)
+ except:
+ args.MonotonicCountValue = (long)(0)
+
+ if args.Encode:
+ #
+ # Save signer private cert filename and close private cert file
+ #
+ try:
+ args.SignerPrivateCertFileName = args.SignerPrivateCertFile.name
+ args.SignerPrivateCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.SignerPrivateCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_SIGNER_PRIVATE_CERT_FILENAME)
+ args.SignerPrivateCertFile = open(args.SignerPrivateCertFileName, 'rb')
+ args.SignerPrivateCertFile.close()
+ except:
+ print 'ERROR: test signer private cert file %s missing' % (args.SignerPrivateCertFileName)
+ sys.exit(1)
+
+ #
+ # Save other public cert filename and close public cert file
+ #
+ try:
+ args.OtherPublicCertFileName = args.OtherPublicCertFile.name
+ args.OtherPublicCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.OtherPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_OTHER_PUBLIC_CERT_FILENAME)
+ args.OtherPublicCertFile = open(args.OtherPublicCertFileName, 'rb')
+ args.OtherPublicCertFile.close()
+ except:
+ print 'ERROR: test other public cert file %s missing' % (args.OtherPublicCertFileName)
+ sys.exit(1)
+
+ format = "Q%ds" % len(args.InputFileBuffer)
+ FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
+
+ #
+ # Sign the input file using the specified private key and capture signature from STDOUT
+ #
+ Process = subprocess.Popen('%s smime -sign -binary -signer "%s" -outform DER -md sha256 -certfile "%s"' % (OpenSslCommand, args.SignerPrivateCertFileName, args.OtherPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ Signature = Process.communicate(input=FullInputFileBuffer)[0]
+ if Process.returncode <> 0:
+ sys.exit(Process.returncode)
+
+ #
+ # Write output file that contains Signature, and Input data
+ #
+ args.OutputFile = open(args.OutputFileName, 'wb')
+ args.OutputFile.write(Signature)
+ args.OutputFile.write(args.InputFileBuffer)
+ args.OutputFile.close()
+
+ if args.Decode:
+ #
+ # Save trusted public cert filename and close public cert file
+ #
+ try:
+ args.TrustedPublicCertFileName = args.TrustedPublicCertFile.name
+ args.TrustedPublicCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.TrustedPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_TRUSTED_PUBLIC_CERT_FILENAME)
+ args.TrustedPublicCertFile = open(args.TrustedPublicCertFileName, 'rb')
+ args.TrustedPublicCertFile.close()
+ except:
+ print 'ERROR: test trusted public cert file %s missing' % (args.TrustedPublicCertFileName)
+ sys.exit(1)
+
+ if not args.SignatureSizeStr:
+ print "ERROR: please use the option --signature-size to specify the size of the signature data!"
+ sys.exit(1)
+ else:
+ if args.SignatureSizeStr.upper().startswith('0X'):
+ SignatureSize = (long)(args.SignatureSizeStr, 16)
+ else:
+ SignatureSize = (long)(args.SignatureSizeStr)
+ if SignatureSize < 0:
+ print "ERROR: The value of option --signature-size can't be set to negative value!"
+ sys.exit(1)
+ elif SignatureSize > len(args.InputFileBuffer):
+ print "ERROR: The value of option --signature-size is exceed the size of the input file !"
+ sys.exit(1)
+
+ args.SignatureBuffer = args.InputFileBuffer[0:SignatureSize]
+ args.InputFileBuffer = args.InputFileBuffer[SignatureSize:]
+
+ format = "Q%ds" % len(args.InputFileBuffer)
+ FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
+
+ #
+ # Save output file contents from input file
+ #
+ open(args.OutputFileName, 'wb').write(FullInputFileBuffer)
+
+ #
+ # Verify signature
+ #
+ Process = subprocess.Popen('%s smime -verify -inform DER -content %s -CAfile %s' % (OpenSslCommand, args.OutputFileName, args.TrustedPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ Process.communicate(input=args.SignatureBuffer)[0]
+ if Process.returncode <> 0:
+ print 'ERROR: Verification failed'
+ os.remove (args.OutputFileName)
+ sys.exit(Process.returncode)
+
+ open(args.OutputFileName, 'wb').write(args.InputFileBuffer)
--
2.6.1.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Patch] BaseTools: Change source files to DOS format
2016-09-01 9:14 [Patch] BaseTools: Change source files to DOS format Yonghong Zhu
@ 2016-09-02 0:17 ` Gao, Liming
0 siblings, 0 replies; 2+ messages in thread
From: Gao, Liming @ 2016-09-02 0:17 UTC (permalink / raw)
To: Zhu, Yonghong, edk2-devel@lists.01.org
Reviewed-by: Liming Gao <liming.gao@intel.com>
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Yonghong Zhu
Sent: Thursday, September 1, 2016 5:15 PM
To: edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: [edk2] [Patch] BaseTools: Change source files to DOS format
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
---
BaseTools/Source/C/GenFv/GenFvInternalLib.c | 12 +-
BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py | 564 ++++++++++++-------------
2 files changed, 288 insertions(+), 288 deletions(-)
diff --git a/BaseTools/Source/C/GenFv/GenFvInternalLib.c b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
index 123e355..fab7c94 100644
--- a/BaseTools/Source/C/GenFv/GenFvInternalLib.c
+++ b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
@@ -2768,17 +2768,17 @@ Returns:
}
if (!mArm) {
//
// Update reset vector (SALE_ENTRY for IPF)
// Now for IA32 and IA64 platform, the fv which has bsf file must have the
- // EndAddress of 0xFFFFFFFF (unless the section was rebased).
- // Thus, only this type fv needs to update the reset vector.
- // If the PEI Core is found, the VTF file will probably get
- // corrupted by updating the entry point.
+ // EndAddress of 0xFFFFFFFF (unless the section was rebased).
+ // Thus, only this type fv needs to update the reset vector.
+ // If the PEI Core is found, the VTF file will probably get
+ // corrupted by updating the entry point.
//
- if (mFvDataInfo.ForceRebase == 1 ||
- (mFvDataInfo.BaseAddress + mFvDataInfo.Size) == FV_IMAGES_TOP_ADDRESS) {
+ if (mFvDataInfo.ForceRebase == 1 ||
+ (mFvDataInfo.BaseAddress + mFvDataInfo.Size) == FV_IMAGES_TOP_ADDRESS) {
Status = UpdateResetVector (&FvImageMemoryFile, &mFvDataInfo, VtfFileImage);
if (EFI_ERROR(Status)) {
Error (NULL, 0, 3000, "Invalid", "Could not update the reset vector.");
goto Finish;
}
diff --git a/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py b/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
index 1998d6c..c1977d6 100644
--- a/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
+++ b/BaseTools/Source/Python/Pkcs7Sign/Pkcs7Sign.py
@@ -1,282 +1,282 @@
-## @file
-# This tool adds EFI_FIRMWARE_IMAGE_AUTHENTICATION for a binary.
-#
-# This tool only support CertType - EFI_CERT_TYPE_PKCS7_GUID
-# {0x4aafd29d, 0x68df, 0x49ee, {0x8a, 0xa9, 0x34, 0x7d, 0x37, 0x56, 0x65, 0xa7}}
-#
-# This tool has been tested with OpenSSL.
-#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-'''
-Pkcs7Sign
-'''
-
-import os
-import sys
-import argparse
-import subprocess
-import uuid
-import struct
-import collections
-from Common.BuildVersion import gBUILD_VERSION
-
-#
-# Globals for help information
-#
-__prog__ = 'Pkcs7Sign'
-__version__ = '%s Version %s' % (__prog__, '0.9 ' + gBUILD_VERSION)
-__copyright__ = 'Copyright (c) 2016, Intel Corporation. All rights reserved.'
-__usage__ = '%s -e|-d [options] <input_file>' % (__prog__)
-
-#
-# GUID for PKCS7 from UEFI Specification
-#
-WIN_CERT_REVISION = 0x0200
-WIN_CERT_TYPE_EFI_GUID = 0x0EF1
-EFI_CERT_TYPE_PKCS7_GUID = uuid.UUID('{4aafd29d-68df-49ee-8aa9-347d375665a7}')
-
-#
-# typedef struct _WIN_CERTIFICATE {
-# UINT32 dwLength;
-# UINT16 wRevision;
-# UINT16 wCertificateType;
-# //UINT8 bCertificate[ANYSIZE_ARRAY];
-# } WIN_CERTIFICATE;
-#
-# typedef struct _WIN_CERTIFICATE_UEFI_GUID {
-# WIN_CERTIFICATE Hdr;
-# EFI_GUID CertType;
-# //UINT8 CertData[ANYSIZE_ARRAY];
-# } WIN_CERTIFICATE_UEFI_GUID;
-#
-# typedef struct {
-# UINT64 MonotonicCount;
-# WIN_CERTIFICATE_UEFI_GUID AuthInfo;
-# } EFI_FIRMWARE_IMAGE_AUTHENTICATION;
-#
-
-#
-# Filename of test signing private cert that is stored in same directory as this tool
-#
-TEST_SIGNER_PRIVATE_CERT_FILENAME = 'TestCert.pem'
-TEST_OTHER_PUBLIC_CERT_FILENAME = 'TestSub.pub.pem'
-TEST_TRUSTED_PUBLIC_CERT_FILENAME = 'TestRoot.pub.pem'
-
-if __name__ == '__main__':
- #
- # Create command line argument parser object
- #
- parser = argparse.ArgumentParser(prog=__prog__, version=__version__, usage=__usage__, description=__copyright__, conflict_handler='resolve')
- group = parser.add_mutually_exclusive_group(required=True)
- group.add_argument("-e", action="store_true", dest='Encode', help='encode file')
- group.add_argument("-d", action="store_true", dest='Decode', help='decode file')
- parser.add_argument("-o", "--output", dest='OutputFile', type=str, metavar='filename', help="specify the output filename", required=True)
- parser.add_argument("--signer-private-cert", dest='SignerPrivateCertFile', type=argparse.FileType('rb'), help="specify the signer private cert filename. If not specified, a test signer private cert is used.")
- parser.add_argument("--other-public-cert", dest='OtherPublicCertFile', type=argparse.FileType('rb'), help="specify the other public cert filename. If not specified, a test other public cert is used.")
- parser.add_argument("--trusted-public-cert", dest='TrustedPublicCertFile', type=argparse.FileType('rb'), help="specify the trusted public cert filename. If not specified, a test trusted public cert is used.")
- parser.add_argument("--monotonic-count", dest='MonotonicCountStr', type=str, help="specify the MonotonicCount in FMP capsule. If not specified, 0 is used.")
- parser.add_argument("--signature-size", dest='SignatureSizeStr', type=str, help="specify the signature size for decode process.")
- parser.add_argument("-v", "--verbose", dest='Verbose', action="store_true", help="increase output messages")
- parser.add_argument("-q", "--quiet", dest='Quiet', action="store_true", help="reduce output messages")
- parser.add_argument("--debug", dest='Debug', type=int, metavar='[0-9]', choices=range(0,10), default=0, help="set debug level")
- parser.add_argument(metavar="input_file", dest='InputFile', type=argparse.FileType('rb'), help="specify the input filename")
-
- #
- # Parse command line arguments
- #
- args = parser.parse_args()
-
- #
- # Generate file path to Open SSL command
- #
- OpenSslCommand = 'openssl'
- try:
- OpenSslPath = os.environ['OPENSSL_PATH']
- OpenSslCommand = os.path.join(OpenSslPath, OpenSslCommand)
- except:
- pass
-
- #
- # Verify that Open SSL command is available
- #
- try:
- Process = subprocess.Popen('%s version' % (OpenSslCommand), stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- except:
- print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
- sys.exit(1)
-
- Version = Process.communicate()
- if Process.returncode <> 0:
- print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
- sys.exit(Process.returncode)
- print Version[0]
-
- #
- # Read input file into a buffer and save input filename
- #
- args.InputFileName = args.InputFile.name
- args.InputFileBuffer = args.InputFile.read()
- args.InputFile.close()
-
- #
- # Save output filename and check if path exists
- #
- OutputDir = os.path.dirname(args.OutputFile)
- if not os.path.exists(OutputDir):
- print 'ERROR: The output path does not exist: %s' % OutputDir
- sys.exit(1)
- args.OutputFileName = args.OutputFile
-
- try:
- if args.MonotonicCountStr.upper().startswith('0X'):
- args.MonotonicCountValue = (long)(args.MonotonicCountStr, 16)
- else:
- args.MonotonicCountValue = (long)(args.MonotonicCountStr)
- except:
- args.MonotonicCountValue = (long)(0)
-
- if args.Encode:
- #
- # Save signer private cert filename and close private cert file
- #
- try:
- args.SignerPrivateCertFileName = args.SignerPrivateCertFile.name
- args.SignerPrivateCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.SignerPrivateCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_SIGNER_PRIVATE_CERT_FILENAME)
- args.SignerPrivateCertFile = open(args.SignerPrivateCertFileName, 'rb')
- args.SignerPrivateCertFile.close()
- except:
- print 'ERROR: test signer private cert file %s missing' % (args.SignerPrivateCertFileName)
- sys.exit(1)
-
- #
- # Save other public cert filename and close public cert file
- #
- try:
- args.OtherPublicCertFileName = args.OtherPublicCertFile.name
- args.OtherPublicCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.OtherPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_OTHER_PUBLIC_CERT_FILENAME)
- args.OtherPublicCertFile = open(args.OtherPublicCertFileName, 'rb')
- args.OtherPublicCertFile.close()
- except:
- print 'ERROR: test other public cert file %s missing' % (args.OtherPublicCertFileName)
- sys.exit(1)
-
- format = "Q%ds" % len(args.InputFileBuffer)
- FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
-
- #
- # Sign the input file using the specified private key and capture signature from STDOUT
- #
- Process = subprocess.Popen('%s smime -sign -binary -signer "%s" -outform DER -md sha256 -certfile "%s"' % (OpenSslCommand, args.SignerPrivateCertFileName, args.OtherPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- Signature = Process.communicate(input=FullInputFileBuffer)[0]
- if Process.returncode <> 0:
- sys.exit(Process.returncode)
-
- #
- # Write output file that contains Signature, and Input data
- #
- args.OutputFile = open(args.OutputFileName, 'wb')
- args.OutputFile.write(Signature)
- args.OutputFile.write(args.InputFileBuffer)
- args.OutputFile.close()
-
- if args.Decode:
- #
- # Save trusted public cert filename and close public cert file
- #
- try:
- args.TrustedPublicCertFileName = args.TrustedPublicCertFile.name
- args.TrustedPublicCertFile.close()
- except:
- try:
- #
- # Get path to currently executing script or executable
- #
- if hasattr(sys, 'frozen'):
- Pkcs7ToolPath = sys.executable
- else:
- Pkcs7ToolPath = sys.argv[0]
- if Pkcs7ToolPath.startswith('"'):
- Pkcs7ToolPath = Pkcs7ToolPath[1:]
- if Pkcs7ToolPath.endswith('"'):
- Pkcs7ToolPath = RsaToolPath[:-1]
- args.TrustedPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_TRUSTED_PUBLIC_CERT_FILENAME)
- args.TrustedPublicCertFile = open(args.TrustedPublicCertFileName, 'rb')
- args.TrustedPublicCertFile.close()
- except:
- print 'ERROR: test trusted public cert file %s missing' % (args.TrustedPublicCertFileName)
- sys.exit(1)
-
- if not args.SignatureSizeStr:
- print "ERROR: please use the option --signature-size to specify the size of the signature data!"
- sys.exit(1)
- else:
- if args.SignatureSizeStr.upper().startswith('0X'):
- SignatureSize = (long)(args.SignatureSizeStr, 16)
- else:
- SignatureSize = (long)(args.SignatureSizeStr)
- if SignatureSize < 0:
- print "ERROR: The value of option --signature-size can't be set to negative value!"
- sys.exit(1)
- elif SignatureSize > len(args.InputFileBuffer):
- print "ERROR: The value of option --signature-size is exceed the size of the input file !"
- sys.exit(1)
-
- args.SignatureBuffer = args.InputFileBuffer[0:SignatureSize]
- args.InputFileBuffer = args.InputFileBuffer[SignatureSize:]
-
- format = "Q%ds" % len(args.InputFileBuffer)
- FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
-
- #
- # Save output file contents from input file
- #
- open(args.OutputFileName, 'wb').write(FullInputFileBuffer)
-
- #
- # Verify signature
- #
- Process = subprocess.Popen('%s smime -verify -inform DER -content %s -CAfile %s' % (OpenSslCommand, args.OutputFileName, args.TrustedPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- Process.communicate(input=args.SignatureBuffer)[0]
- if Process.returncode <> 0:
- print 'ERROR: Verification failed'
- os.remove (args.OutputFileName)
- sys.exit(Process.returncode)
-
- open(args.OutputFileName, 'wb').write(args.InputFileBuffer)
+## @file
+# This tool adds EFI_FIRMWARE_IMAGE_AUTHENTICATION for a binary.
+#
+# This tool only support CertType - EFI_CERT_TYPE_PKCS7_GUID
+# {0x4aafd29d, 0x68df, 0x49ee, {0x8a, 0xa9, 0x34, 0x7d, 0x37, 0x56, 0x65, 0xa7}}
+#
+# This tool has been tested with OpenSSL.
+#
+# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+'''
+Pkcs7Sign
+'''
+
+import os
+import sys
+import argparse
+import subprocess
+import uuid
+import struct
+import collections
+from Common.BuildVersion import gBUILD_VERSION
+
+#
+# Globals for help information
+#
+__prog__ = 'Pkcs7Sign'
+__version__ = '%s Version %s' % (__prog__, '0.9 ' + gBUILD_VERSION)
+__copyright__ = 'Copyright (c) 2016, Intel Corporation. All rights reserved.'
+__usage__ = '%s -e|-d [options] <input_file>' % (__prog__)
+
+#
+# GUID for PKCS7 from UEFI Specification
+#
+WIN_CERT_REVISION = 0x0200
+WIN_CERT_TYPE_EFI_GUID = 0x0EF1
+EFI_CERT_TYPE_PKCS7_GUID = uuid.UUID('{4aafd29d-68df-49ee-8aa9-347d375665a7}')
+
+#
+# typedef struct _WIN_CERTIFICATE {
+# UINT32 dwLength;
+# UINT16 wRevision;
+# UINT16 wCertificateType;
+# //UINT8 bCertificate[ANYSIZE_ARRAY];
+# } WIN_CERTIFICATE;
+#
+# typedef struct _WIN_CERTIFICATE_UEFI_GUID {
+# WIN_CERTIFICATE Hdr;
+# EFI_GUID CertType;
+# //UINT8 CertData[ANYSIZE_ARRAY];
+# } WIN_CERTIFICATE_UEFI_GUID;
+#
+# typedef struct {
+# UINT64 MonotonicCount;
+# WIN_CERTIFICATE_UEFI_GUID AuthInfo;
+# } EFI_FIRMWARE_IMAGE_AUTHENTICATION;
+#
+
+#
+# Filename of test signing private cert that is stored in same directory as this tool
+#
+TEST_SIGNER_PRIVATE_CERT_FILENAME = 'TestCert.pem'
+TEST_OTHER_PUBLIC_CERT_FILENAME = 'TestSub.pub.pem'
+TEST_TRUSTED_PUBLIC_CERT_FILENAME = 'TestRoot.pub.pem'
+
+if __name__ == '__main__':
+ #
+ # Create command line argument parser object
+ #
+ parser = argparse.ArgumentParser(prog=__prog__, version=__version__, usage=__usage__, description=__copyright__, conflict_handler='resolve')
+ group = parser.add_mutually_exclusive_group(required=True)
+ group.add_argument("-e", action="store_true", dest='Encode', help='encode file')
+ group.add_argument("-d", action="store_true", dest='Decode', help='decode file')
+ parser.add_argument("-o", "--output", dest='OutputFile', type=str, metavar='filename', help="specify the output filename", required=True)
+ parser.add_argument("--signer-private-cert", dest='SignerPrivateCertFile', type=argparse.FileType('rb'), help="specify the signer private cert filename. If not specified, a test signer private cert is used.")
+ parser.add_argument("--other-public-cert", dest='OtherPublicCertFile', type=argparse.FileType('rb'), help="specify the other public cert filename. If not specified, a test other public cert is used.")
+ parser.add_argument("--trusted-public-cert", dest='TrustedPublicCertFile', type=argparse.FileType('rb'), help="specify the trusted public cert filename. If not specified, a test trusted public cert is used.")
+ parser.add_argument("--monotonic-count", dest='MonotonicCountStr', type=str, help="specify the MonotonicCount in FMP capsule. If not specified, 0 is used.")
+ parser.add_argument("--signature-size", dest='SignatureSizeStr', type=str, help="specify the signature size for decode process.")
+ parser.add_argument("-v", "--verbose", dest='Verbose', action="store_true", help="increase output messages")
+ parser.add_argument("-q", "--quiet", dest='Quiet', action="store_true", help="reduce output messages")
+ parser.add_argument("--debug", dest='Debug', type=int, metavar='[0-9]', choices=range(0,10), default=0, help="set debug level")
+ parser.add_argument(metavar="input_file", dest='InputFile', type=argparse.FileType('rb'), help="specify the input filename")
+
+ #
+ # Parse command line arguments
+ #
+ args = parser.parse_args()
+
+ #
+ # Generate file path to Open SSL command
+ #
+ OpenSslCommand = 'openssl'
+ try:
+ OpenSslPath = os.environ['OPENSSL_PATH']
+ OpenSslCommand = os.path.join(OpenSslPath, OpenSslCommand)
+ except:
+ pass
+
+ #
+ # Verify that Open SSL command is available
+ #
+ try:
+ Process = subprocess.Popen('%s version' % (OpenSslCommand), stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ except:
+ print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
+ sys.exit(1)
+
+ Version = Process.communicate()
+ if Process.returncode <> 0:
+ print 'ERROR: Open SSL command not available. Please verify PATH or set OPENSSL_PATH'
+ sys.exit(Process.returncode)
+ print Version[0]
+
+ #
+ # Read input file into a buffer and save input filename
+ #
+ args.InputFileName = args.InputFile.name
+ args.InputFileBuffer = args.InputFile.read()
+ args.InputFile.close()
+
+ #
+ # Save output filename and check if path exists
+ #
+ OutputDir = os.path.dirname(args.OutputFile)
+ if not os.path.exists(OutputDir):
+ print 'ERROR: The output path does not exist: %s' % OutputDir
+ sys.exit(1)
+ args.OutputFileName = args.OutputFile
+
+ try:
+ if args.MonotonicCountStr.upper().startswith('0X'):
+ args.MonotonicCountValue = (long)(args.MonotonicCountStr, 16)
+ else:
+ args.MonotonicCountValue = (long)(args.MonotonicCountStr)
+ except:
+ args.MonotonicCountValue = (long)(0)
+
+ if args.Encode:
+ #
+ # Save signer private cert filename and close private cert file
+ #
+ try:
+ args.SignerPrivateCertFileName = args.SignerPrivateCertFile.name
+ args.SignerPrivateCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.SignerPrivateCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_SIGNER_PRIVATE_CERT_FILENAME)
+ args.SignerPrivateCertFile = open(args.SignerPrivateCertFileName, 'rb')
+ args.SignerPrivateCertFile.close()
+ except:
+ print 'ERROR: test signer private cert file %s missing' % (args.SignerPrivateCertFileName)
+ sys.exit(1)
+
+ #
+ # Save other public cert filename and close public cert file
+ #
+ try:
+ args.OtherPublicCertFileName = args.OtherPublicCertFile.name
+ args.OtherPublicCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.OtherPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_OTHER_PUBLIC_CERT_FILENAME)
+ args.OtherPublicCertFile = open(args.OtherPublicCertFileName, 'rb')
+ args.OtherPublicCertFile.close()
+ except:
+ print 'ERROR: test other public cert file %s missing' % (args.OtherPublicCertFileName)
+ sys.exit(1)
+
+ format = "Q%ds" % len(args.InputFileBuffer)
+ FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
+
+ #
+ # Sign the input file using the specified private key and capture signature from STDOUT
+ #
+ Process = subprocess.Popen('%s smime -sign -binary -signer "%s" -outform DER -md sha256 -certfile "%s"' % (OpenSslCommand, args.SignerPrivateCertFileName, args.OtherPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ Signature = Process.communicate(input=FullInputFileBuffer)[0]
+ if Process.returncode <> 0:
+ sys.exit(Process.returncode)
+
+ #
+ # Write output file that contains Signature, and Input data
+ #
+ args.OutputFile = open(args.OutputFileName, 'wb')
+ args.OutputFile.write(Signature)
+ args.OutputFile.write(args.InputFileBuffer)
+ args.OutputFile.close()
+
+ if args.Decode:
+ #
+ # Save trusted public cert filename and close public cert file
+ #
+ try:
+ args.TrustedPublicCertFileName = args.TrustedPublicCertFile.name
+ args.TrustedPublicCertFile.close()
+ except:
+ try:
+ #
+ # Get path to currently executing script or executable
+ #
+ if hasattr(sys, 'frozen'):
+ Pkcs7ToolPath = sys.executable
+ else:
+ Pkcs7ToolPath = sys.argv[0]
+ if Pkcs7ToolPath.startswith('"'):
+ Pkcs7ToolPath = Pkcs7ToolPath[1:]
+ if Pkcs7ToolPath.endswith('"'):
+ Pkcs7ToolPath = RsaToolPath[:-1]
+ args.TrustedPublicCertFileName = os.path.join(os.path.dirname(os.path.realpath(Pkcs7ToolPath)), TEST_TRUSTED_PUBLIC_CERT_FILENAME)
+ args.TrustedPublicCertFile = open(args.TrustedPublicCertFileName, 'rb')
+ args.TrustedPublicCertFile.close()
+ except:
+ print 'ERROR: test trusted public cert file %s missing' % (args.TrustedPublicCertFileName)
+ sys.exit(1)
+
+ if not args.SignatureSizeStr:
+ print "ERROR: please use the option --signature-size to specify the size of the signature data!"
+ sys.exit(1)
+ else:
+ if args.SignatureSizeStr.upper().startswith('0X'):
+ SignatureSize = (long)(args.SignatureSizeStr, 16)
+ else:
+ SignatureSize = (long)(args.SignatureSizeStr)
+ if SignatureSize < 0:
+ print "ERROR: The value of option --signature-size can't be set to negative value!"
+ sys.exit(1)
+ elif SignatureSize > len(args.InputFileBuffer):
+ print "ERROR: The value of option --signature-size is exceed the size of the input file !"
+ sys.exit(1)
+
+ args.SignatureBuffer = args.InputFileBuffer[0:SignatureSize]
+ args.InputFileBuffer = args.InputFileBuffer[SignatureSize:]
+
+ format = "Q%ds" % len(args.InputFileBuffer)
+ FullInputFileBuffer = struct.pack(format,args.MonotonicCountValue, args.InputFileBuffer)
+
+ #
+ # Save output file contents from input file
+ #
+ open(args.OutputFileName, 'wb').write(FullInputFileBuffer)
+
+ #
+ # Verify signature
+ #
+ Process = subprocess.Popen('%s smime -verify -inform DER -content %s -CAfile %s' % (OpenSslCommand, args.OutputFileName, args.TrustedPublicCertFileName), stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+ Process.communicate(input=args.SignatureBuffer)[0]
+ if Process.returncode <> 0:
+ print 'ERROR: Verification failed'
+ os.remove (args.OutputFileName)
+ sys.exit(Process.returncode)
+
+ open(args.OutputFileName, 'wb').write(args.InputFileBuffer)
--
2.6.1.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-02 0:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-01 9:14 [Patch] BaseTools: Change source files to DOS format Yonghong Zhu
2016-09-02 0:17 ` Gao, Liming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox