public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Gao, Liming" <liming.gao@intel.com>
To: "Mudusuru, Giri P" <giri.p.mudusuru@intel.com>,
	"Yao, Jiewen" <jiewen.yao@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
Date: Thu, 20 Oct 2016 05:10:39 +0000	[thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14B497020@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <4666AEFED60F8E4198B42BB01DCEABDF76F17149@ORSMSX113.amr.corp.intel.com>

Reviewed-by: Liming Gao <liming.gao@intel.com>

> -----Original Message-----
> From: Mudusuru, Giri P
> Sent: Tuesday, October 18, 2016 9:56 PM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: RE: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> definitions
> 
> Agree Jiewen will update it before pushing the patch.
> 
> Thanks,
> -Giri
> 
> > -----Original Message-----
> > From: Yao, Jiewen
> > Sent: Tuesday, October 18, 2016 6:30 AM
> > To: Mudusuru, Giri P <giri.p.mudusuru@intel.com>; edk2-
> devel@lists.01.org
> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> > <liming.gao@intel.com>
> > Subject: RE: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> > definitions
> >
> > HI
> > I recommend we just use #include <IndustryStandard/Acpi.h>.
> > Acpi.h includes all ACPI version. There is no need to include Acpi61.h.
> >
> > With this change, reviewed-by: Jiewen.yao@intel.com
> >
> >
> > > -----Original Message-----
> > > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > > Giri P Mudusuru
> > > Sent: Tuesday, October 18, 2016 7:25 PM
> > > To: edk2-devel@lists.01.org
> > > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> > > <jiewen.yao@intel.com>; Gao, Liming <liming.gao@intel.com>
> > > Subject: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> > > definitions
> > >
> > > ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > >
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > > able.pdf
> > >
> > > Cc: Michael Kinney <michael.d.kinney@intel.com>
> > > Cc: Liming Gao <liming.gao@intel.com>
> > > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > > Contributed-under: TianoCore Contribution Agreement 1.0
> > > Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> > > ---
> > >  .../Include/IndustryStandard/LowPowerIdleTable.h   | 82
> > > ++++++++++++++++++++++
> > >  1 file changed, 82 insertions(+)
> > >  create mode 100644
> > > MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > >
> > > diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > new file mode 100644
> > > index 0000000..b29db04
> > > --- /dev/null
> > > +++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> > > @@ -0,0 +1,82 @@
> > > +/** @file
> > > +  ACPI Low Power Idle Table (LPIT) definitions
> > > +
> > > +  Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> > > +  This program and the accompanying materials
> > > +  are licensed and made available under the terms and conditions of the
> > > BSD License
> > > +  which accompanies this distribution.  The full text of the license may be
> > > found at
> > > +  http://opensource.org/licenses/bsd-license.php
> > > +
> > > +  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > > BASIS,
> > > +  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +
> > > +  @par Revision Reference:
> > > +    - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> > > +
> > >
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> > > able.pdf
> > > +
> > > +  @par Glossary:
> > > +    - GAS - Generic Address Structure
> > > +    - LPI - Low Power Idle
> > > +**/
> > > +#ifndef _LOW_POWER_IDLE_TABLE_H_
> > > +#define _LOW_POWER_IDLE_TABLE_H_
> > > +
> > > +#include <IndustryStandard/Acpi61.h>
> > > +
> > > +#pragma pack(1)
> > > +
> > > +///
> > > +/// LPI Structure Types
> > > +///
> > > +#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE     0x00
> > > +
> > > +///
> > > +/// Low Power Idle (LPI) State Flags
> > > +///
> > > +typedef union {
> > > +  struct {
> > > +    UINT32 Disabled           : 1;  ///< If set, LPI state is not used
> > > +    /**
> > > +      If set, Residency counter is not available for this LPI state and
> > > +      Residency Counter Frequency is invalid
> > > +    **/
> > > +    UINT32 CounterUnavailable : 1;
> > > +    UINT32 Reserved           : 30; ///< Reserved for future use. Must
> > > be zero
> > > +  } Bits;
> > > +  UINT32 Data32;
> > > +} ACPI_LPI_STATE_FLAGS;
> > > +
> > > +///
> > > +/// Low Power Idle (LPI) structure with Native C-state instruction entry
> > > trigger descriptor
> > > +///
> > > +typedef struct {
> > > +  UINT32                                  Type;   ///< LPI State
> > > descriptor Type 0
> > > +  UINT32                                  Length; ///< Length of
> > > LPI state Descriptor Structure
> > > +  ///
> > > +  /// Unique LPI state identifier: zero based, monotonically increasing
> > > identifier
> > > +  ///
> > > +  UINT16                                  UniqueId;
> > > +  UINT8                                   Reserved[2];  ///<
> > > Must be Zero
> > > +  ACPI_LPI_STATE_FLAGS                    Flags;        ///< LPI
> > > state flags
> > > +  /**
> > > +    The LPI entry trigger, matching an existing _CST.Register object,
> > > represented as a
> > > +    Generic Address Structure. All processors must request this state or
> > > deeper to trigger.
> > > +  **/
> > > +  EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE  EntryTrigger;
> > > +  UINT32                                  Residency;  ///<
> > > Minimum residency or break-even in uSec
> > > +  UINT32                                  Latency;    ///<
> > > Worst case exit latency in uSec
> > > +  /**
> > > +    [optional] Residency counter, represented as a Generic Address
> > > Structure.
> > > +    If not present, Flags[1] bit should be set.
> > > +  **/
> > > +  EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE  ResidencyCounter;
> > > +  /**
> > > +    [optional] Residency counter frequency in cycles per second. Value 0
> > > indicates that
> > > +    counter runs at TSC frequency. Valid only if Residency Counter is
> > > present.
> > > +  **/
> > > +  UINT64
> > > ResidencyCounterFrequency;
> > > +} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
> > > +
> > > +#pragma pack()
> > > +
> > > +#endif
> > > --
> > > 2.9.0.windows.1
> > >
> > > _______________________________________________
> > > edk2-devel mailing list
> > > edk2-devel@lists.01.org
> > > https://lists.01.org/mailman/listinfo/edk2-devel


      reply	other threads:[~2016-10-20  5:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-18 11:24 [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions Giri P Mudusuru
2016-10-18 13:30 ` Yao, Jiewen
2016-10-18 13:55   ` Mudusuru, Giri P
2016-10-20  5:10     ` Gao, Liming [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14B497020@shsmsx102.ccr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox