From: "Gao, Liming" <liming.gao@intel.com>
To: "Bi, Dandan" <dandan.bi@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>, Leo Duran <leo.duran@amd.com>
Subject: Re: [patch] MdePkg: Avoid Non-Boolean type used as Boolean
Date: Fri, 20 Jan 2017 03:15:56 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14D6D1D30@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1484873652-136780-1-git-send-email-dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
>-----Original Message-----
>From: Bi, Dandan
>Sent: Friday, January 20, 2017 8:54 AM
>To: edk2-devel@lists.01.org
>Cc: Brijesh Singh <brijesh.singh@amd.com>; Leo Duran
><leo.duran@amd.com>; Gao, Liming <liming.gao@intel.com>
>Subject: [patch] MdePkg: Avoid Non-Boolean type used as Boolean
>
>Cc: Brijesh Singh <brijesh.singh@amd.com>
>Cc: Leo Duran <leo.duran@amd.com>
>Cc: Liming Gao <liming.gao@intel.com>
>Signed-off-by: Leo Duran <leo.duran@amd.com>
>Reviewed-by: Liming Gao <liming.gao@intel.com>
>
>Contributed-under: TianoCore Contribution Agreement 1.0
>Signed-off-by: Dandan Bi <dandan.bi@intel.com>
>---
> MdePkg/Library/BaseIoLibIntrinsic/IoLibIpf.c | 12 ++++++------
> MdePkg/Library/DxeIoLibCpuIo2/DxeCpuIo2LibInternal.h | 1 -
> MdePkg/Library/SmmIoLibSmmCpuIo2/IoLib.c | 12 ++++++------
> 3 files changed, 12 insertions(+), 13 deletions(-)
>
>diff --git a/MdePkg/Library/BaseIoLibIntrinsic/IoLibIpf.c
>b/MdePkg/Library/BaseIoLibIntrinsic/IoLibIpf.c
>index e388549..b84134b 100644
>--- a/MdePkg/Library/BaseIoLibIntrinsic/IoLibIpf.c
>+++ b/MdePkg/Library/BaseIoLibIntrinsic/IoLibIpf.c
>@@ -280,11 +280,11 @@ IoReadFifo8 (
> )
> {
> UINT8 *Buffer8;
>
> Buffer8 = (UINT8 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer8++ = IoRead8 (Port);
> }
> }
>
> /**
>@@ -313,11 +313,11 @@ IoReadFifo16 (
> )
> {
> UINT16 *Buffer16;
>
> Buffer16 = (UINT16 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer16++ = IoRead16 (Port);
> }
> }
>
> /**
>@@ -346,11 +346,11 @@ IoReadFifo32 (
> )
> {
> UINT32 *Buffer32;
>
> Buffer32 = (UINT32 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer32++ = IoRead32 (Port);
> }
> }
>
> /**
>@@ -379,11 +379,11 @@ IoWriteFifo8 (
> )
> {
> UINT8 *Buffer8;
>
> Buffer8 = (UINT8 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite8 (Port, *Buffer8++);
> }
> }
>
> /**
>@@ -412,11 +412,11 @@ IoWriteFifo16 (
> )
> {
> UINT16 *Buffer16;
>
> Buffer16 = (UINT16 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite16 (Port, *Buffer16++);
> }
> }
>
> /**
>@@ -445,11 +445,11 @@ IoWriteFifo32 (
> )
> {
> UINT32 *Buffer32;
>
> Buffer32 = (UINT32 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite32 (Port, *Buffer32++);
> }
> }
>
> /**
>diff --git a/MdePkg/Library/DxeIoLibCpuIo2/DxeCpuIo2LibInternal.h
>b/MdePkg/Library/DxeIoLibCpuIo2/DxeCpuIo2LibInternal.h
>index c84ce6b..8c289cb 100644
>--- a/MdePkg/Library/DxeIoLibCpuIo2/DxeCpuIo2LibInternal.h
>+++ b/MdePkg/Library/DxeIoLibCpuIo2/DxeCpuIo2LibInternal.h
>@@ -133,11 +133,10 @@ IoWriteFifoWorker (
> This function must guarantee that all MMIO read and write operations are
>serialized.
>
> @param Address The MMIO register to read.
> The caller is responsible for aligning the Address if required.
> @param Width The width of the I/O operation.
>- @param Count The number of times to write I/O port.
>
> @return Data read from registers in the EFI system memory space.
>
> **/
> UINT64
>diff --git a/MdePkg/Library/SmmIoLibSmmCpuIo2/IoLib.c
>b/MdePkg/Library/SmmIoLibSmmCpuIo2/IoLib.c
>index 0279bde..69acb80 100644
>--- a/MdePkg/Library/SmmIoLibSmmCpuIo2/IoLib.c
>+++ b/MdePkg/Library/SmmIoLibSmmCpuIo2/IoLib.c
>@@ -394,11 +394,11 @@ IoReadFifo8 (
> )
> {
> UINT8 *Buffer8;
>
> Buffer8 = (UINT8 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer8++ = IoRead8 (Port);
> }
> }
>
> /**
>@@ -427,11 +427,11 @@ IoWriteFifo8 (
> )
> {
> UINT8 *Buffer8;
>
> Buffer8 = (UINT8 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite8 (Port, *Buffer8++);
> }
> }
>
> /**
>@@ -464,11 +464,11 @@ IoReadFifo16 (
> //
> // Make sure Port is aligned on a 16-bit boundary.
> //
> ASSERT ((Port & 1) == 0);
> Buffer16 = (UINT16 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer16++ = IoRead16 (Port);
> }
> }
>
> /**
>@@ -501,11 +501,11 @@ IoWriteFifo16 (
> //
> // Make sure Port is aligned on a 16-bit boundary.
> //
> ASSERT ((Port & 1) == 0);
> Buffer16 = (UINT16 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite16 (Port, *Buffer16++);
> }
> }
>
> /**
>@@ -538,11 +538,11 @@ IoReadFifo32 (
> //
> // Make sure Port is aligned on a 32-bit boundary.
> //
> ASSERT ((Port & 3) == 0);
> Buffer32 = (UINT32 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> *Buffer32++ = IoRead32 (Port);
> }
> }
>
> /**
>@@ -575,11 +575,11 @@ IoWriteFifo32 (
> //
> // Make sure Port is aligned on a 32-bit boundary.
> //
> ASSERT ((Port & 3) == 0);
> Buffer32 = (UINT32 *)Buffer;
>- while (Count--) {
>+ while (Count-- > 0) {
> IoWrite32 (Port, *Buffer32++);
> }
> }
>
> /**
>--
>1.9.5.msysgit.1
next prev parent reply other threads:[~2017-01-20 3:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 0:54 [patch] MdePkg: Avoid Non-Boolean type used as Boolean Dandan Bi
2017-01-20 3:15 ` Gao, Liming [this message]
2017-01-20 15:52 ` Duran, Leo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14D6D1D30@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox