From: "Gao, Liming" <liming.gao@intel.com>
To: "Bi, Dandan" <dandan.bi@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ni, Ruiyu" <ruiyu.ni@intel.com>, "Dong, Eric" <eric.dong@intel.com>
Subject: Re: [patch] MdePkg/HiiImageEx: Fix incorrect comments of functions
Date: Tue, 14 Mar 2017 13:06:17 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14D6EFA0F@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <3C0D5C461C9E904E8F62152F6274C0BB3B89B4C8@shsmsx102.ccr.corp.intel.com>
That's good. The change is good to me.
> -----Original Message-----
> From: Bi, Dandan
> Sent: Tuesday, March 14, 2017 1:21 PM
> To: Gao, Liming <liming.gao@intel.com>; edk2-devel@lists.01.org
> Cc: Ni, Ruiyu <ruiyu.ni@intel.com>; Dong, Eric <eric.dong@intel.com>
> Subject: RE: [edk2] [patch] MdePkg/HiiImageEx: Fix incorrect comments of functions
>
> Hi Liming,
>
> It seems no need to change the comments in the implementation codes.
> The comments in the implementation codes are correct.
>
>
> Thanks,
> Dandan
> -----Original Message-----
> From: Gao, Liming
> Sent: Tuesday, March 14, 2017 12:23 PM
> To: Bi, Dandan <dandan.bi@intel.com>; edk2-devel@lists.01.org
> Cc: Ni, Ruiyu <ruiyu.ni@intel.com>; Dong, Eric <eric.dong@intel.com>
> Subject: RE: [edk2] [patch] MdePkg/HiiImageEx: Fix incorrect comments of functions
>
> Dandan:
> Is this change required in HiiDataBase? HiiDataBase implements HiiImageEx protocol.
>
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > Dandan Bi
> > Sent: Tuesday, March 14, 2017 9:39 AM
> > To: edk2-devel@lists.01.org
> > Cc: Ni, Ruiyu <ruiyu.ni@intel.com>; Dong, Eric <eric.dong@intel.com>;
> > Gao, Liming <liming.gao@intel.com>
> > Subject: [edk2] [patch] MdePkg/HiiImageEx: Fix incorrect comments of
> > functions
> >
> > Cc: Liming Gao <liming.gao@intel.com>
> > Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> > Cc: Eric Dong <eric.dong@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Dandan Bi <dandan.bi@intel.com>
> > ---
> > MdePkg/Include/Protocol/HiiImageEx.h | 80
> > +++++++++++++++++++-----------------
> > 1 file changed, 43 insertions(+), 37 deletions(-)
> >
> > diff --git a/MdePkg/Include/Protocol/HiiImageEx.h
> > b/MdePkg/Include/Protocol/HiiImageEx.h
> > index b92fc3a..5a48380 100644
> > --- a/MdePkg/Include/Protocol/HiiImageEx.h
> > +++ b/MdePkg/Include/Protocol/HiiImageEx.h
> > @@ -26,12 +26,11 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> >
> > typedef struct _EFI_HII_IMAGE_EX_PROTOCOL EFI_HII_IMAGE_EX_PROTOCOL;
> >
> > /**
> > The prototype of this extension function is the same with EFI_HII_IMAGE_PROTOCOL.NewImage().
> > - Same with EFI_HII_IMAGE_PROTOCOL.NewImage().This protocol invokes
> > -EFI_HII_IMAGE_PROTOCOL.NewImage() implicitly.
> > + This protocol invokes EFI_HII_IMAGE_PROTOCOL.NewImage() implicitly.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > @param PackageList Handle of the package list where this image will
> > be added.
> > @param ImageId On return, contains the new image id, which is
> > @@ -55,26 +54,28 @@ EFI_STATUS
> > );
> >
> > /**
> > Return the information about the image, associated with the package list.
> > The prototype of this extension function is the same with EFI_HII_IMAGE_PROTOCOL.GetImage().
> > - Same with EFI_HII_IMAGE_PROTOCOL.SetImage(),this protocol invokes EFI_HII_IMAGE_PROTOCOL.SetImage() implicitly.
> > +
> > + This function is similar to EFI_HII_IMAGE_PROTOCOL.GetImage().The
> > + difference is that this function will locate all
> > + EFI_HII_IMAGE_DECODER_PROTOCOL instances installed in the system if
> > + the decoder of the certain image type is not supported by the
> > + EFI_HII_IMAGE_EX_PROTOCOL. The function will attempt to decode the
> > + image to the EFI_IMAGE_INPUT using the first EFI_HII_IMAGE_DECODER_PROTOCOL instance that supports the requested
> image type.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > - @param PackageList Handle of the package list where this image will
> > - be searched.
> > - @param ImageId The image's id,, which is unique within
> > - PackageList.
> > + @param PackageList The package list in the HII database to search for the
> > + specified image.
> > + @param ImageId The image's id, which is unique within PackageList.
> > @param Image Points to the image.
> >
> > @retval EFI_SUCCESS The new image was returned successfully.
> > - @retval EFI_NOT_FOUND The image specified by ImageId is not in the
> > - database. The specified PackageList is not in
> > - the database.
> > - @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to
> > - hold the image.
> > - @retval EFI_INVALID_PARAMETER The Image or ImageSize was NULL.
> > + @retval EFI_NOT_FOUND The image specified by ImageId is not available. The specified
> > + PackageList is not in the Database.
> > + @retval EFI_INVALID_PARAMETER Image was NULL or ImageId was 0.
> > @retval EFI_OUT_OF_RESOURCES The bitmap could not be retrieved because there
> > was not enough memory.
> >
> > **/
> > typedef
> > @@ -85,25 +86,26 @@ EFI_STATUS
> > IN EFI_IMAGE_ID ImageId,
> > OUT EFI_IMAGE_INPUT *Image
> > );
> >
> > /**
> > - Change the information about the image. The prototype of this
> > extension
> > - function is the same with EFI_HII_IMAGE_PROTOCOL.SetImage(). Same
> > with
> > - EFI_HII_IMAGE_PROTOCOL.DrawImageId(),this protocol invokes EFI_HII_IMAGE_PROTOCOL.DrawImageId() implicitly.
> > + Change the information about the image.
> > +
> > + Same with EFI_HII_IMAGE_PROTOCOL.SetImage(),this protocol invokes
> > + EFI_HII_IMAGE_PROTOCOL.SetImage()implicitly.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > @param PackageList The package list containing the images.
> > - @param ImageId The image's id,, which is unique within
> > - PackageList.
> > + @param ImageId The image's id, which is unique within PackageList.
> > @param Image Points to the image.
> >
> > - @retval EFI_SUCCESS The new image was updated successfully.
> > + @retval EFI_SUCCESS The new image was successfully updated.
> > @retval EFI_NOT_FOUND The image specified by ImageId is not in the
> > database. The specified PackageList is not in
> > the database.
> > - @retval EFI_INVALID_PARAMETER The Image was NULL.
> > + @retval EFI_INVALID_PARAMETER The Image was NULL, the ImageId was 0 or
> > + the Image->Bitmap was NULL.
> >
> > **/
> > typedef
> > EFI_STATUS
> > (EFIAPI *EFI_HII_SET_IMAGE_EX)(
> > @@ -112,34 +114,35 @@ EFI_STATUS
> > IN EFI_IMAGE_ID ImageId,
> > IN CONST EFI_IMAGE_INPUT *Image
> > );
> >
> > /**
> > - Renders an image to a bitmap or to the display. The prototype of
> > this extension
> > - function is the same with EFI_HII_IMAGE_PROTOCOL.DrawImage().
> > - Same with EFI_HII_IMAGE_PROTOCOL.SetImage(),this protocol invokes EFI_HII_IMAGE_PROTOCOL.SetImage() implicitly.
> > + Renders an image to a bitmap or to the display.
> > +
> > + The prototype of this extension function is the same with
> > + EFI_HII_IMAGE_PROTOCOL.DrawImage(). This protocol invokes
> > + EFI_HII_IMAGE_PROTOCOL.DrawImage() implicitly.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > @param Flags Describes how the image is to be drawn.
> > @param Image Points to the image to be displayed.
> > @param Blt If this points to a non-NULL on entry, this points
> > to the image, which is Width pixels wide and
> > Height pixels high. The image will be drawn onto
> > this image and EFI_HII_DRAW_FLAG_CLIP is implied.
> > - If this points to a NULL on entry, then a buffer
> > - will be allocated to hold the generated image and
> > + If this points to a NULL on entry, then a buffer
> > + will be allocated to hold the
> > + generated image and
> > the pointer updated on exit. It is the caller's
> > responsibility to free this buffer.
> > @param BltX Specifies the offset from the left and top edge of
> > - the output image of the first pixel in the image.
> > + the output image of the first pixel in the image.
> > @param BltY Specifies the offset from the left and top edge of
> > - the output image of the first pixel in the image.
> > + the output image of the first pixel in the image.
> >
> > @retval EFI_SUCCESS The image was successfully drawn.
> > @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt.
> > @retval EFI_INVALID_PARAMETER The Image or Blt was NULL.
> > - Any combination of Flags is invalid.
> >
> > **/
> > typedef
> > EFI_STATUS
> > (EFIAPI *EFI_HII_DRAW_IMAGE_EX)(
> > @@ -151,21 +154,24 @@ EFI_STATUS
> > IN UINTN BltY
> > );
> >
> > /**
> > Renders an image to a bitmap or the screen containing the contents
> > of the specified
> > - image. The prototype of this extension function is the same with E
> > - FI_HII_IMAGE_PROTOCOL.DrawImageId().
> > - Same with EFI_HII_IMAGE_PROTOCOL.DrawImageId(),this protocol
> > invokes
> > -EFI_HII_IMAGE_PROTOCOL.DrawImageId() implicitly.
> > + image.
> > +
> > + This function is similar to EFI_HII_IMAGE_PROTOCOL.DrawImageId().
> > + The difference is that this function will locate all
> > + EFI_HII_IMAGE_DECODER_PROTOCOL instances installed in the system if
> > + the decoder of the certain image type is not supported by the
> > + EFI_HII_IMAGE_EX_PROTOCOL. The function will attempt to decode the
> > + image to the EFI_IMAGE_INPUT using the first EFI_HII_IMAGE_DECODER_PROTOCOL instance that supports the requested
> image type.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > @param Flags Describes how the image is to be drawn.
> > @param PackageList The package list in the HII database to search for
> > the specified image.
> > - @param ImageId The image's id, which is unique within
> > - PackageList.
> > + @param ImageId The image's id, which is unique within PackageList.
> > @param Blt If this points to a non-NULL on entry, this points
> > to the image, which is Width pixels wide and
> > Height pixels high. The image will be drawn onto
> > this image and EFI_HII_DRAW_FLAG_CLIP is implied.
> > If this points to a NULL on entry,
> > then a buffer @@ -177,11 +183,11 @@ EFI_HII_IMAGE_PROTOCOL.DrawImageId() implicitly.
> > @param BltY Specifies the offset from the left and top edge of
> > the output image of the first pixel in the image.
> >
> > @retval EFI_SUCCESS The image was successfully drawn.
> > @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt.
> > - @retval EFI_INVALID_PARAMETER The Blt was NULL.
> > + @retval EFI_INVALID_PARAMETER The Blt was NULL or ImageId was 0.
> > @retval EFI_NOT_FOUND The image specified by ImageId is not in the database.
> > The specified PackageList is not in the database.
> >
> > **/
> > typedef
> > @@ -204,19 +210,19 @@ EFI_STATUS
> > system if the decoder of image type is not supported by the EFI_HII_IMAGE_EX_PROTOCOL.
> >
> > @param This A pointer to the EFI_HII_IMAGE_EX_PROTOCOL instance.
> > @param PackageList Handle of the package list where this image will
> > be searched.
> > - @param ImageId The image's id,, which is unique within PackageList.
> > + @param ImageId The image's id, which is unique within PackageList.
> > @param Image Points to the image.
> >
> > @retval EFI_SUCCESS The new image was returned successfully.
> > @retval EFI_NOT_FOUND The image specified by ImageId is not in the
> > database. The specified PackageList is not in the database.
> > @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to
> > hold the image.
> > - @retval EFI_INVALID_PARAMETER The Image or ImageSize was NULL.
> > + @retval EFI_INVALID_PARAMETER The Image was NULL or the ImageId was 0.
> > @retval EFI_OUT_OF_RESOURCES The bitmap could not be retrieved because there
> > was not enough memory.
> >
> > **/
> > typedef
> > --
> > 1.9.5.msysgit.1
> >
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2017-03-14 13:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-14 1:39 [patch] MdePkg/HiiImageEx: Fix incorrect comments of functions Dandan Bi
2017-03-14 1:39 ` [patch] ShellPkg/UefiShellBcfgCommandLib: Fix VS2012 build failure Dandan Bi
2017-03-14 15:15 ` Carsey, Jaben
2017-03-15 1:47 ` Ni, Ruiyu
2017-03-14 4:23 ` [patch] MdePkg/HiiImageEx: Fix incorrect comments of functions Gao, Liming
2017-03-14 5:20 ` Bi, Dandan
2017-03-14 13:06 ` Gao, Liming [this message]
2017-03-15 1:48 ` Ni, Ruiyu
2017-03-15 1:48 ` Ni, Ruiyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14D6EFA0F@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox