* [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format
@ 2017-03-30 8:23 Song, BinX
2017-03-30 8:39 ` Gao, Liming
0 siblings, 1 reply; 2+ messages in thread
From: Song, BinX @ 2017-03-30 8:23 UTC (permalink / raw)
To: edk2-devel@lists.01.org; +Cc: Gao, Liming
V2:
- Update correct patch info
V1:
- Add x mode for Brotli and BrotliCompress
- Change Brotli and BrotliCompress format from DOS to UNIX
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
---
BaseTools/BinWrappers/PosixLike/Brotli | 58 +++++++++---------
BaseTools/BinWrappers/PosixLike/BrotliCompress | 84 +++++++++++++-------------
2 files changed, 71 insertions(+), 71 deletions(-)
mode change 100644 => 100755 BaseTools/BinWrappers/PosixLike/Brotli
mode change 100644 => 100755 BaseTools/BinWrappers/PosixLike/BrotliCompress
diff --git a/BaseTools/BinWrappers/PosixLike/Brotli b/BaseTools/BinWrappers/PosixLike/Brotli
old mode 100644
new mode 100755
index a244ecc..0945d86
--- a/BaseTools/BinWrappers/PosixLike/Brotli
+++ b/BaseTools/BinWrappers/PosixLike/Brotli
@@ -1,29 +1,29 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
- exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
- if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
- then
- echo "BaseTools C Tool binary was not found ($cmd)"
- echo "You may need to run:"
- echo " make -C $EDK_TOOLS_PATH/Source/C"
- else
- exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
- fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
- exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
- echo "Unable to find the real '$cmd' to run"
- echo "This message was printed by"
- echo " $0"
- exit 127
-fi
-
+#!/usr/bin/env bash
+
+full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
+dir=$(dirname "$full_cmd")
+cmd=${full_cmd##*/}
+
+if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
+then
+ exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
+elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
+then
+ if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
+ then
+ echo "BaseTools C Tool binary was not found ($cmd)"
+ echo "You may need to run:"
+ echo " make -C $EDK_TOOLS_PATH/Source/C"
+ else
+ exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
+ fi
+elif [ -e "$dir/../../Source/C/bin/$cmd" ]
+then
+ exec "$dir/../../Source/C/bin/$cmd" "$@"
+else
+ echo "Unable to find the real '$cmd' to run"
+ echo "This message was printed by"
+ echo " $0"
+ exit 127
+fi
+
diff --git a/BaseTools/BinWrappers/PosixLike/BrotliCompress b/BaseTools/BinWrappers/PosixLike/BrotliCompress
old mode 100644
new mode 100755
index a571ff6..59c6465
--- a/BaseTools/BinWrappers/PosixLike/BrotliCompress
+++ b/BaseTools/BinWrappers/PosixLike/BrotliCompress
@@ -1,42 +1,42 @@
-#!/usr/bin/env bash
-#
-# This script will exec Brotli tool.
-#
-# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-LVL="--quality 9"
-
-while [ $# != 0 ];do
- case $1 in
- -d)
- ARGS+="--decompress "
- ;;
- -e)
- ;;
- -g)
- ARGS+="--gap $2 "
- shift
- ;;
- -l)
- LVL="--quality $2 "
- shift
- ;;
- -o)
- ARGS+="--output $2 "
- shift
- ;;
- *)
- ARGS+="--input $1 "
- esac
-
-shift
-done
-
-exec Brotli $ARGS $LVL
+#!/usr/bin/env bash
+#
+# This script will exec Brotli tool.
+#
+# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+LVL="--quality 9"
+
+while [ $# != 0 ];do
+ case $1 in
+ -d)
+ ARGS+="--decompress "
+ ;;
+ -e)
+ ;;
+ -g)
+ ARGS+="--gap $2 "
+ shift
+ ;;
+ -l)
+ LVL="--quality $2 "
+ shift
+ ;;
+ -o)
+ ARGS+="--output $2 "
+ shift
+ ;;
+ *)
+ ARGS+="--input $1 "
+ esac
+
+shift
+done
+
+exec Brotli $ARGS $LVL
--
2.10.2.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format
2017-03-30 8:23 [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format Song, BinX
@ 2017-03-30 8:39 ` Gao, Liming
0 siblings, 0 replies; 2+ messages in thread
From: Gao, Liming @ 2017-03-30 8:39 UTC (permalink / raw)
To: Song, BinX, edk2-devel@lists.01.org, Michael Zimmermann
Reviewed-by: Liming Gao <liming.gao@intel.com>
>-----Original Message-----
>From: Song, BinX
>Sent: Thursday, March 30, 2017 4:23 PM
>To: edk2-devel@lists.01.org
>Cc: Gao, Liming <liming.gao@intel.com>
>Subject: [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and
>format
>
>V2:
>- Update correct patch info
>
>V1:
>- Add x mode for Brotli and BrotliCompress
>- Change Brotli and BrotliCompress format from DOS to UNIX
>
>Cc: Liming Gao <liming.gao@intel.com>
>Contributed-under: TianoCore Contribution Agreement 1.0
>Signed-off-by: Bell Song <binx.song@intel.com>
>---
> BaseTools/BinWrappers/PosixLike/Brotli | 58 +++++++++---------
> BaseTools/BinWrappers/PosixLike/BrotliCompress | 84 +++++++++++++------
>-------
> 2 files changed, 71 insertions(+), 71 deletions(-)
> mode change 100644 => 100755 BaseTools/BinWrappers/PosixLike/Brotli
> mode change 100644 => 100755
>BaseTools/BinWrappers/PosixLike/BrotliCompress
>
>diff --git a/BaseTools/BinWrappers/PosixLike/Brotli
>b/BaseTools/BinWrappers/PosixLike/Brotli
>old mode 100644
>new mode 100755
>index a244ecc..0945d86
>--- a/BaseTools/BinWrappers/PosixLike/Brotli
>+++ b/BaseTools/BinWrappers/PosixLike/Brotli
>@@ -1,29 +1,29 @@
>-#!/usr/bin/env bash
>-
>-full_cmd=${BASH_SOURCE:-$0} # see
>http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a
>good choice here
>-dir=$(dirname "$full_cmd")
>-cmd=${full_cmd##*/}
>-
>-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
>-then
>- exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
>-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
>-then
>- if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
>- then
>- echo "BaseTools C Tool binary was not found ($cmd)"
>- echo "You may need to run:"
>- echo " make -C $EDK_TOOLS_PATH/Source/C"
>- else
>- exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
>- fi
>-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
>-then
>- exec "$dir/../../Source/C/bin/$cmd" "$@"
>-else
>- echo "Unable to find the real '$cmd' to run"
>- echo "This message was printed by"
>- echo " $0"
>- exit 127
>-fi
>-
>+#!/usr/bin/env bash
>+
>+full_cmd=${BASH_SOURCE:-$0} # see
>http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a
>good choice here
>+dir=$(dirname "$full_cmd")
>+cmd=${full_cmd##*/}
>+
>+if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
>+then
>+ exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
>+elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
>+then
>+ if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
>+ then
>+ echo "BaseTools C Tool binary was not found ($cmd)"
>+ echo "You may need to run:"
>+ echo " make -C $EDK_TOOLS_PATH/Source/C"
>+ else
>+ exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
>+ fi
>+elif [ -e "$dir/../../Source/C/bin/$cmd" ]
>+then
>+ exec "$dir/../../Source/C/bin/$cmd" "$@"
>+else
>+ echo "Unable to find the real '$cmd' to run"
>+ echo "This message was printed by"
>+ echo " $0"
>+ exit 127
>+fi
>+
>diff --git a/BaseTools/BinWrappers/PosixLike/BrotliCompress
>b/BaseTools/BinWrappers/PosixLike/BrotliCompress
>old mode 100644
>new mode 100755
>index a571ff6..59c6465
>--- a/BaseTools/BinWrappers/PosixLike/BrotliCompress
>+++ b/BaseTools/BinWrappers/PosixLike/BrotliCompress
>@@ -1,42 +1,42 @@
>-#!/usr/bin/env bash
>-#
>-# This script will exec Brotli tool.
>-#
>-# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
>-# This program and the accompanying materials
>-# are licensed and made available under the terms and conditions of the BSD
>License
>-# which accompanies this distribution. The full text of the license may be
>found at
>-# http://opensource.org/licenses/bsd-license.php
>-#
>-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
>BASIS,
>-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
>EXPRESS OR IMPLIED.
>-#
>-LVL="--quality 9"
>-
>-while [ $# != 0 ];do
>- case $1 in
>- -d)
>- ARGS+="--decompress "
>- ;;
>- -e)
>- ;;
>- -g)
>- ARGS+="--gap $2 "
>- shift
>- ;;
>- -l)
>- LVL="--quality $2 "
>- shift
>- ;;
>- -o)
>- ARGS+="--output $2 "
>- shift
>- ;;
>- *)
>- ARGS+="--input $1 "
>- esac
>-
>-shift
>-done
>-
>-exec Brotli $ARGS $LVL
>+#!/usr/bin/env bash
>+#
>+# This script will exec Brotli tool.
>+#
>+# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
>+# This program and the accompanying materials
>+# are licensed and made available under the terms and conditions of the BSD
>License
>+# which accompanies this distribution. The full text of the license may be
>found at
>+# http://opensource.org/licenses/bsd-license.php
>+#
>+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
>BASIS,
>+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
>EXPRESS OR IMPLIED.
>+#
>+LVL="--quality 9"
>+
>+while [ $# != 0 ];do
>+ case $1 in
>+ -d)
>+ ARGS+="--decompress "
>+ ;;
>+ -e)
>+ ;;
>+ -g)
>+ ARGS+="--gap $2 "
>+ shift
>+ ;;
>+ -l)
>+ LVL="--quality $2 "
>+ shift
>+ ;;
>+ -o)
>+ ARGS+="--output $2 "
>+ shift
>+ ;;
>+ *)
>+ ARGS+="--input $1 "
>+ esac
>+
>+shift
>+done
>+
>+exec Brotli $ARGS $LVL
>--
>2.10.2.windows.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-30 8:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-30 8:23 [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format Song, BinX
2017-03-30 8:39 ` Gao, Liming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox