From: "Gao, Liming" <liming.gao@intel.com>
To: Liu Yu <pedroa.liu@outlook.com>,
"\"afish@apple.com; jordan.l.justen@intel.com ;
ruiyu.ni\"@intel.com" <"afish@apple.com;
jordan.l.justen@intel.com ; ruiyu.ni"@intel.com>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: EmulatorPkg/Unix/Host fixed numeric pad function
Date: Mon, 19 Nov 2018 00:52:10 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14E36E3DF@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <TY2PR02MB283193B426F702EF9B34BD2D8FDF0@TY2PR02MB2831.apcprd02.prod.outlook.com>
Yu:
Could you add the reason why make this change?
Besides, please add Contributed-under: TianoCore Contribution Agreement 1.1 before Signed-off-by. And, add Cc: to the package maintainers. Then, use git send-email to send this patch.
Thanks
Liming
>-----Original Message-----
>From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Liu
>Yu
>Sent: Sunday, November 18, 2018 10:54 PM
>To: "afish@apple.com; jordan.l.justen@intel.com ; ruiyu.ni"@intel.com
>Cc: edk2-devel@lists.01.org
>Subject: [edk2] EmulatorPkg/Unix/Host fixed numeric pad function
>
>add numeric pad key map
>
>Signed-off-by: Pedroa Liu <pedroa.liu@outlook.com>
>---
> EmulatorPkg/Unix/Host/X11GraphicsWindow.c | 54 ++++++++++++++++++-
>----
> 1 file changed, 43 insertions(+), 11 deletions(-)
>
>diff --git a/EmulatorPkg/Unix/Host/X11GraphicsWindow.c
>b/EmulatorPkg/Unix/Host/X11GraphicsWindow.c
>index a3cc28c223..573f0f1bfd 100644
>--- a/EmulatorPkg/Unix/Host/X11GraphicsWindow.c
>+++ b/EmulatorPkg/Unix/Host/X11GraphicsWindow.c
>@@ -271,7 +271,14 @@ handleKeyEvent (
> }
> }
>
>- // Skipping EFI_MENU_KEY_PRESSED and EFI_SYS_REQ_PRESSED
>+ if ((ev->xkey.state & Mod2Mask) == 0) {
>+ Drv->KeyState.KeyToggleState &= ~EFI_NUM_LOCK_ACTIVE;
>+ } else {
>+ if (Make) {
>+ Drv->KeyState.KeyToggleState |= EFI_NUM_LOCK_ACTIVE;
>+ }
>+ }
>+ // Skipping EFI_MENU_KEY_PRESSED and EFI_SYS_REQ_PRESSED
>
> switch (*KeySym) {
> case XK_Control_R:
>@@ -328,35 +335,70 @@ handleKeyEvent (
> break;
>
> case XK_KP_Home:
>+ if ((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE))) {
>+ KeyData.Key.UnicodeChar = L'7'; break;
>+ }
> case XK_Home: KeyData.Key.ScanCode = SCAN_HOME; break;
>
> case XK_KP_End:
>+ if ((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE))) {
>+ KeyData.Key.UnicodeChar = L'1'; break;
>+ }
> case XK_End: KeyData.Key.ScanCode = SCAN_END; break;
>
> case XK_KP_Left:
>+ if ((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE))) {
>+ KeyData.Key.UnicodeChar = L'4'; break;
>+ }
> case XK_Left: KeyData.Key.ScanCode = SCAN_LEFT; break;
>
> case XK_KP_Right:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'6'; break;
>+ }
> case XK_Right: KeyData.Key.ScanCode = SCAN_RIGHT; break;
>
> case XK_KP_Up:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'8'; break;
>+ }
> case XK_Up: KeyData.Key.ScanCode = SCAN_UP; break;
>
> case XK_KP_Down:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'2'; break;
>+ }
> case XK_Down: KeyData.Key.ScanCode = SCAN_DOWN; break;
>
> case XK_KP_Delete:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'.'; break;
>+ }
> case XK_Delete: KeyData.Key.ScanCode = SCAN_DELETE; break;
>
> case XK_KP_Insert:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'0';break;
>+ }
> case XK_Insert: KeyData.Key.ScanCode = SCAN_INSERT; break;
>
> case XK_KP_Page_Up:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'9'; break;
>+ }
> case XK_Page_Up: KeyData.Key.ScanCode = SCAN_PAGE_UP; break;
>
> case XK_KP_Page_Down:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'3'; break;
>+ }
> case XK_Page_Down: KeyData.Key.ScanCode = SCAN_PAGE_DOWN; break;
>
>+ case XK_KP_Begin:
>+ if((Drv->KeyState.KeyShiftState & (EFI_LEFT_SHIFT_PRESSED |
>EFI_RIGHT_SHIFT_PRESSED)) ^ (Drv->KeyState.KeyToggleState &
>(EFI_NUM_LOCK_ACTIVE)) ){
>+ KeyData.Key.UnicodeChar = L'5'; break;
>+ }
>+ /* no map efi scan code */ break;
> case XK_Escape: KeyData.Key.ScanCode = SCAN_ESC; break;
>
> case XK_Pause: KeyData.Key.ScanCode = SCAN_PAUSE; break;
>@@ -431,16 +473,6 @@ handleKeyEvent (
> case XK_KP_Decimal : KeyData.Key.UnicodeChar = L'.'; break;
> case XK_KP_Divide : KeyData.Key.UnicodeChar = L'/'; break;
>
>- case XK_KP_0 : KeyData.Key.UnicodeChar = L'0'; break;
>- case XK_KP_1 : KeyData.Key.UnicodeChar = L'1'; break;
>- case XK_KP_2 : KeyData.Key.UnicodeChar = L'2'; break;
>- case XK_KP_3 : KeyData.Key.UnicodeChar = L'3'; break;
>- case XK_KP_4 : KeyData.Key.UnicodeChar = L'4'; break;
>- case XK_KP_5 : KeyData.Key.UnicodeChar = L'5'; break;
>- case XK_KP_6 : KeyData.Key.UnicodeChar = L'6'; break;
>- case XK_KP_7 : KeyData.Key.UnicodeChar = L'7'; break;
>- case XK_KP_8 : KeyData.Key.UnicodeChar = L'8'; break;
>- case XK_KP_9 : KeyData.Key.UnicodeChar = L'9'; break;
>
> default:
> ;
>--
>2.17.1
>
>_______________________________________________
>edk2-devel mailing list
>edk2-devel@lists.01.org
>https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-11-19 0:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-18 14:53 EmulatorPkg/Unix/Host fixed numeric pad function Liu Yu
2018-11-19 0:52 ` Gao, Liming [this message]
2018-11-19 6:11 ` 答复: " Liu Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14E36E3DF@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox