From: "Liming Gao" <liming.gao@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"leif.lindholm@linaro.org" <leif.lindholm@linaro.org>,
Abner Chang <abner.chang@hpe.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
Gilbert Chen <gilbert.chen@hpe.com>
Subject: Re: [edk2-devel] [PATCH] MdePkg:Include: Update SmBios header file
Date: Tue, 17 Sep 2019 14:42:55 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14E4FD801@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20190917133335.GD28454@bivouac.eciton.net>
Abner:
I add my comments.
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of Leif Lindholm
> Sent: Tuesday, September 17, 2019 9:34 PM
> To: Abner Chang <abner.chang@hpe.com>
> Cc: devel@edk2.groups.io; Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming <liming.gao@intel.com>; Gilbert Chen
> <gilbert.chen@hpe.com>
> Subject: Re: [edk2-devel] [PATCH] MdePkg:Include: Update SmBios header file
>
> On Tue, Sep 17, 2019 at 02:24:30PM +0800, Abner Chang wrote:
> > Update SmBios header file to conform with SMBIOS v3.3.0.
>
> Ah, I note SMBIOS 3.3 has not yet been released - so this can not be
> merged in edk2 master at this point. I did not realise this when I
> requested you send the patch.
Please submit BZ https://bugzilla.tianocore.org/ for this update. This is a new feature.
>
> However, you can carry this in your edk2-staging branch, and once the
> specification gets released we can take it into edk2.
>
> (After code review, a couple of minor comments below.)
>
> > The major update is to add definitions of SMBIOS Type 44h record.
> >
> > Signed-off-by: Abner Chang <abner.chang@hpe.com>
> >
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Cc: Gilbert Chen <gilbert.chen@hpe.com>
> >
> > ---
> > MdePkg/Include/IndustryStandard/SmBios.h | 74 +++++++++++++++++++++++++++++++-
> > 1 file changed, 72 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdePkg/Include/IndustryStandard/SmBios.h b/MdePkg/Include/IndustryStandard/SmBios.h
> > index f3b6f18..ebf0ceb 100644
> > --- a/MdePkg/Include/IndustryStandard/SmBios.h
> > +++ b/MdePkg/Include/IndustryStandard/SmBios.h
> > @@ -3,6 +3,7 @@
> >
> > Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> > (C) Copyright 2015-2017 Hewlett Packard Enterprise Development LP<BR>
> > +(C) Copyright 2015 - 2019 Hewlett Packard Enterprise Development LP<BR>
> > SPDX-License-Identifier: BSD-2-Clause-Patent
File header should be updated.
Industry Standard Definitions of SMBIOS Table Specification v3.2.0.
==>
Industry Standard Definitions of SMBIOS Table Specification v3.3.0.
And, please refer to https://bugzilla.tianocore.org/show_bug.cgi?id=1099 for 3.2 update,
prepare all changes for SmBios 3.3 update.
Thanks
Liming
> >
> > **/
> > @@ -46,7 +47,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > #define SMBIOS_3_0_TABLE_MAX_LENGTH 0xFFFFFFFF
> >
> > //
> > -// SMBIOS type macros which is according to SMBIOS 2.7 specification.
> > +// SMBIOS type macros which is according to SMBIOS 3.3.0 specification.
> > //
> > #define SMBIOS_TYPE_BIOS_INFORMATION 0
> > #define SMBIOS_TYPE_SYSTEM_INFORMATION 1
> > @@ -92,6 +93,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > #define SMBIOS_TYPE_ONBOARD_DEVICES_EXTENDED_INFORMATION 41
> > #define SMBIOS_TYPE_MANAGEMENT_CONTROLLER_HOST_INTERFACE 42
> > #define SMBIOS_TYPE_TPM_DEVICE 43
> > +#define SMBIOS_TYPE_PROCESSOR_ADDITIONAL_INFORMATION 44
> >
> > ///
> > /// Inactive type is added from SMBIOS 2.2. Reference SMBIOS 2.6, chapter 3.3.43.
> > @@ -727,7 +729,10 @@ typedef enum {
> > ProcessorFamilyMII = 0x012E,
> > ProcessorFamilyWinChip = 0x0140,
> > ProcessorFamilyDSP = 0x015E,
> > - ProcessorFamilyVideoProcessor = 0x01F4
> > + ProcessorFamilyVideoProcessor = 0x01F4,
> > + ProcessorFamilyRiscvRV32 = 0x0200, ///< SMBIOS spec 3.3.0 added
>
> Please drop the "///< SMBIOS spec 3.3.0 added" comment. Here and below.
>
> > + ProcessorFamilyRiscVRV64 = 0x0201, ///< SMBIOS spec 3.3.0 added
> > + ProcessorFamilyRiscVRV128 = 0x0202 ///< SMBIOS spec 3.3.0 added
>
> No further comments from me (MdePkg maintainers may have some).
>
> /
> Leif
>
> > } PROCESSOR_FAMILY2_DATA;
> >
> > ///
> > @@ -857,6 +862,19 @@ typedef struct {
> > } PROCESSOR_FEATURE_FLAGS;
> >
> > typedef struct {
> > + UINT32 ProcessorReserved1 :1;
> > + UINT32 ProcessorUnknown :1;
> > + UINT32 Processor64BitCapble :1;
> > + UINT32 ProcessorMultiCore :1;
> > + UINT32 ProcessorHardwareThread :1;
> > + UINT32 ProcessorExecuteProtection :1;
> > + UINT32 ProcessorEnhancedVirtulization :1;
> > + UINT32 ProcessorPowerPerformanceCtrl :1;
> > + UINT32 Processor128bitCapble :1;
> > + UINT32 ProcessorReserved2 :7;
> > +} PROCESSOR_CHARACTERISTIC_FLAGS;
> > +
> > +typedef struct {
> > PROCESSOR_SIGNATURE Signature;
> > PROCESSOR_FEATURE_FLAGS FeatureFlags;
> > } PROCESSOR_ID_DATA;
> > @@ -2508,6 +2526,57 @@ typedef struct {
> > UINT8 InterfaceTypeSpecificData[4]; ///< This field has a minimum of four bytes
> > } SMBIOS_TABLE_TYPE42;
> >
> > +
> > +///
> > +/// Processor Specific Block - Processor Architecture Type
> > +///
> > +typedef enum{
> > + ProcessorSpecificBlockArchTypeReserved = 0x00,
> > + ProcessorSpecificBlockArchTypeIa32 = 0x01,
> > + ProcessorSpecificBlockArchTypeX64 = 0x02,
> > + ProcessorSpecificBlockArchTypeItanium = 0x03,
> > + ProcessorSpecificBlockArchTypeAarch32 = 0x04,
> > + ProcessorSpecificBlockArchTypeAarch64 = 0x05,
> > + ProcessorSpecificBlockArchTypeRiscVRV32 = 0x06,
> > + ProcessorSpecificBlockArchTypeRiscVRV64 = 0x07,
> > + ProcessorSpecificBlockArchTypeRiscVRV128 = 0x08
> > +} PROCESSOR_SPECIFIC_BLOCK_ARCH_TYPE;
> > +
> > +///
> > +/// Processor Specific Block is the standard container of processor-specific data.
> > +///
> > +typedef struct {
> > + UINT8 Length;
> > + UINT8 ProcessorArchType;
> > + ///
> > + /// Below followed by Processor-specific data
> > + ///
> > + ///
> > +} PROCESSOR_SPECIFIC_BLOCK;
> > +
> > +///
> > +/// Processor Additional Information(Type 44).
> > +///
> > +/// The information in this structure defines the processor additional information in case
> > +/// SMBIOS type 4 is not sufficient to describe processor characteristics.
> > +/// The SMBIOS type 44 structure has a reference handle field to link back to the related
> > +/// SMBIOS type 4 structure. There may be multiple SMBIOS type 44 structures linked to the
> > +/// same SMBIOS type 4 structure. For example, when cores are not identical in a processor,
> > +/// SMBIOS type 44 structures describe different core-specific information.
> > +///
> > +/// SMBIOS type 44 defines the standard header for the processor-specific block, while the
> > +/// contents of processor-specific data are maintained by processor
> > +/// architecture workgroups or vendors in separate documents.
> > +///
> > +typedef struct {
> > + SMBIOS_STRUCTURE Hdr;
> > + SMBIOS_HANDLE RefHandle; ///< This field refer to associated SMBIOS type 4
> > + ///
> > + /// Below followed by Processor-specific block
> > + ///
> > + PROCESSOR_SPECIFIC_BLOCK ProcessorSpecificBlock;
> > +} SMBIOS_TABLE_TYPE44;
> > +
> > ///
> > /// TPM Device (Type 43).
> > ///
> > @@ -2586,6 +2655,7 @@ typedef union {
> > SMBIOS_TABLE_TYPE41 *Type41;
> > SMBIOS_TABLE_TYPE42 *Type42;
> > SMBIOS_TABLE_TYPE43 *Type43;
> > + SMBIOS_TABLE_TYPE44 *Type44;
> > SMBIOS_TABLE_TYPE126 *Type126;
> > SMBIOS_TABLE_TYPE127 *Type127;
> > UINT8 *Raw;
> > --
> > 2.7.4
> >
>
>
next prev parent reply other threads:[~2019-09-17 14:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 6:24 [PATCH] MdePkg:Include: Update SmBios header file Abner Chang
2019-09-17 13:33 ` Leif Lindholm
2019-09-17 14:42 ` Liming Gao [this message]
2019-09-19 3:38 ` [edk2-devel] " Abner Chang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14E4FD801@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox