* Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** [not found] <15C51B795F616549.24469@groups.io> @ 2019-09-17 3:22 ` Cheng, Ching JenX 2019-09-17 14:56 ` Liming Gao 0 siblings, 1 reply; 4+ messages in thread From: Cheng, Ching JenX @ 2019-09-17 3:22 UTC (permalink / raw) To: devel@edk2.groups.io, Cheng, Ching JenX REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182 In order to support VS2019 on EDK2, the following patches was modified def and batch files 1. Add VS2019 x86/64 definitions on tools_def.template 2. Add VS2019 support on toolsetup batches, and add version check with command vswhere Because VS2019 and VS2017 using the same vswhere to get the InstallationPath v2: In 01/02, add ARM/AARCH64/EBC Definitions, Combine VS2017_HOST and VS2019_HOST to VS_HOST Ching JenX Cheng (2): Add VS2019 Toolchain def Add VS2019 Support on ToolSetup Batches BaseTools/Conf/tools_def.template | 220 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------- BaseTools/get_vsvars.bat | 37 ++++++++++++++++++++++++++++++------- BaseTools/set_vsprefix_envs.bat | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- BaseTools/toolsetup.bat | 16 +++++++++++++--- edksetup.bat | 6 ++++-- 5 files changed, 313 insertions(+), 36 deletions(-) -- 2.21.0.windows.1 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** 2019-09-17 3:22 ` [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** Cheng, Ching JenX @ 2019-09-17 14:56 ` Liming Gao 2019-09-18 1:51 ` Cheng, Ching JenX 0 siblings, 1 reply; 4+ messages in thread From: Liming Gao @ 2019-09-17 14:56 UTC (permalink / raw) To: devel@edk2.groups.io, Cheng, Ching JenX Ching: The change is good. With this change, have you verified VS2017 tool chain? I want to make sure there is no impact on VS2017. Thanks Liming > -----Original Message----- > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of Cheng, Ching JenX > Sent: Tuesday, September 17, 2019 11:23 AM > To: devel@edk2.groups.io; Cheng, Ching JenX <ching.jenx.cheng@intel.com> > Subject: Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182 > > In order to support VS2019 on EDK2, the following patches was modified def and batch files 1. Add VS2019 x86/64 definitions on > tools_def.template 2. Add VS2019 support on toolsetup batches, and add version check with command vswhere > Because VS2019 and VS2017 using the same vswhere to get the InstallationPath > > v2: In 01/02, add ARM/AARCH64/EBC Definitions, Combine VS2017_HOST and VS2019_HOST to VS_HOST > > Ching JenX Cheng (2): > Add VS2019 Toolchain def > Add VS2019 Support on ToolSetup Batches > > BaseTools/Conf/tools_def.template | 220 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------- > BaseTools/get_vsvars.bat | 37 ++++++++++++++++++++++++++++++------- > BaseTools/set_vsprefix_envs.bat | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- > BaseTools/toolsetup.bat | 16 +++++++++++++--- > edksetup.bat | 6 ++++-- > 5 files changed, 313 insertions(+), 36 deletions(-) > > -- > 2.21.0.windows.1 > > > > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** 2019-09-17 14:56 ` Liming Gao @ 2019-09-18 1:51 ` Cheng, Ching JenX 2019-09-18 8:13 ` Liming Gao 0 siblings, 1 reply; 4+ messages in thread From: Cheng, Ching JenX @ 2019-09-18 1:51 UTC (permalink / raw) To: Gao, Liming, devel@edk2.groups.io Hi Liming, The VS2017 is still working fine with this changes, I have verified it with VS2019, VS2017 and VS2015 build, Thanks, Allen > -----Original Message----- > From: Gao, Liming > Sent: Tuesday, September 17, 2019 10:57 PM > To: devel@edk2.groups.io; Cheng, Ching JenX > <ching.jenx.cheng@intel.com> > Subject: RE: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** > > Ching: > The change is good. With this change, have you verified VS2017 tool chain? > I want to make sure there is no impact on VS2017. > > Thanks > Liming > > -----Original Message----- > > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of > > Cheng, Ching JenX > > Sent: Tuesday, September 17, 2019 11:23 AM > > To: devel@edk2.groups.io; Cheng, Ching JenX > > <ching.jenx.cheng@intel.com> > > Subject: Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** > > > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182 > > > > In order to support VS2019 on EDK2, the following patches was modified > > def and batch files 1. Add VS2019 x86/64 definitions on tools_def.template > 2. Add VS2019 support on toolsetup batches, and add version check with > command vswhere > > Because VS2019 and VS2017 using the same vswhere to get the > > InstallationPath > > > > v2: In 01/02, add ARM/AARCH64/EBC Definitions, Combine VS2017_HOST > and > > VS2019_HOST to VS_HOST > > > > Ching JenX Cheng (2): > > Add VS2019 Toolchain def > > Add VS2019 Support on ToolSetup Batches > > > > BaseTools/Conf/tools_def.template | 220 > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++ > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > +++++++++++++++++++++++++------------------- > > BaseTools/get_vsvars.bat | 37 > ++++++++++++++++++++++++++++++------- > > BaseTools/set_vsprefix_envs.bat | 70 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > +++++++----- > > BaseTools/toolsetup.bat | 16 +++++++++++++--- > > edksetup.bat | 6 ++++-- > > 5 files changed, 313 insertions(+), 36 deletions(-) > > > > -- > > 2.21.0.windows.1 > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** 2019-09-18 1:51 ` Cheng, Ching JenX @ 2019-09-18 8:13 ` Liming Gao 0 siblings, 0 replies; 4+ messages in thread From: Liming Gao @ 2019-09-18 8:13 UTC (permalink / raw) To: Cheng, Ching JenX, devel@edk2.groups.io That's good. I have no other comment. Reviewed-by: Liming Gao <liming.gao@intel.com> >-----Original Message----- >From: Cheng, Ching JenX >Sent: Wednesday, September 18, 2019 9:51 AM >To: Gao, Liming <liming.gao@intel.com>; devel@edk2.groups.io >Subject: RE: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** > >Hi Liming, > >The VS2017 is still working fine with this changes, >I have verified it with VS2019, VS2017 and VS2015 build, > >Thanks, >Allen > >> -----Original Message----- >> From: Gao, Liming >> Sent: Tuesday, September 17, 2019 10:57 PM >> To: devel@edk2.groups.io; Cheng, Ching JenX >> <ching.jenx.cheng@intel.com> >> Subject: RE: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** >> >> Ching: >> The change is good. With this change, have you verified VS2017 tool chain? >> I want to make sure there is no impact on VS2017. >> >> Thanks >> Liming >> > -----Original Message----- >> > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of >> > Cheng, Ching JenX >> > Sent: Tuesday, September 17, 2019 11:23 AM >> > To: devel@edk2.groups.io; Cheng, Ching JenX >> > <ching.jenx.cheng@intel.com> >> > Subject: Re: [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** >> > >> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182 >> > >> > In order to support VS2019 on EDK2, the following patches was modified >> > def and batch files 1. Add VS2019 x86/64 definitions on tools_def.template >> 2. Add VS2019 support on toolsetup batches, and add version check with >> command vswhere >> > Because VS2019 and VS2017 using the same vswhere to get the >> > InstallationPath >> > >> > v2: In 01/02, add ARM/AARCH64/EBC Definitions, Combine VS2017_HOST >> and >> > VS2019_HOST to VS_HOST >> > >> > Ching JenX Cheng (2): >> > Add VS2019 Toolchain def >> > Add VS2019 Support on ToolSetup Batches >> > >> > BaseTools/Conf/tools_def.template | 220 >> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> ++ >> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> +++++++++++++++++++++++++------------------- >> > BaseTools/get_vsvars.bat | 37 >> ++++++++++++++++++++++++++++++------- >> > BaseTools/set_vsprefix_envs.bat | 70 >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> +++++++----- >> > BaseTools/toolsetup.bat | 16 +++++++++++++--- >> > edksetup.bat | 6 ++++-- >> > 5 files changed, 313 insertions(+), 36 deletions(-) >> > >> > -- >> > 2.21.0.windows.1 >> > >> > >> > >> > >> > >> > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-18 8:13 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <15C51B795F616549.24469@groups.io> 2019-09-17 3:22 ` [edk2-devel] [PATCH v2 0/2] *** Add VS2019 Support *** Cheng, Ching JenX 2019-09-17 14:56 ` Liming Gao 2019-09-18 1:51 ` Cheng, Ching JenX 2019-09-18 8:13 ` Liming Gao
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox