From: "Liming Gao" <liming.gao@intel.com>
To: "Cheng, Ching JenX" <ching.jenx.cheng@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Chan, Amy" <amy.chan@intel.com>, "Feng, Bob C" <bob.c.feng@intel.com>
Subject: Re: [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches
Date: Thu, 19 Sep 2019 08:23:37 +0000 [thread overview]
Message-ID: <4A89E2EF3DFEDB4C8BFDE51014F606A14E4FE77E@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20190917031627.4304-3-ching.jenx.cheng@intel.com>
Allen:
In my machine, I install VS2017, but not install VS2019. I call edksetup.bat. It will set up VS2017 environment.
But with this change, it will set the wrong WINSDK10_PREFIX. I add the comments in the patch.
>-----Original Message-----
>From: Cheng, Ching JenX
>Sent: Tuesday, September 17, 2019 11:16 AM
>To: devel@edk2.groups.io
>Cc: Chan, Amy <amy.chan@intel.com>; Feng, Bob C <bob.c.feng@intel.com>;
>Gao, Liming <liming.gao@intel.com>
>Subject: [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches
>
>REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
>
>Inorder to support VS2019, we add VS2019 config process
>in Setup Batch Files,
>Because VS2019 and VS2017 could using same vswhere.exe
>to detect the InstallationPath,
>So we add the -version as the parameter of vswhere
>to get the correct VS2017/VS2019's InstallationPath
>
>Cc: Amy Chan <amy.chan@intel.com>
>Cc: Bob Feng <bob.c.feng@intel.com>
>Cc: Liming Gao <liming.gao@intel.com>
>Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
>---
> BaseTools/get_vsvars.bat | 37 ++++++++++++++++++++++++++++++-----
>--
> BaseTools/set_vsprefix_envs.bat | 70
>+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>++++++-----
> BaseTools/toolsetup.bat | 16 +++++++++++++---
> edksetup.bat | 6 ++++--
> 4 files changed, 112 insertions(+), 17 deletions(-)
>
>diff --git a/BaseTools/get_vsvars.bat b/BaseTools/get_vsvars.bat
>index 9f3759b2a9..3beb113be2 100644
>--- a/BaseTools/get_vsvars.bat
>+++ b/BaseTools/get_vsvars.bat
>@@ -10,15 +10,21 @@
> @echo off
> set SCRIPT_ERROR=0
> if "%1"=="" goto main
>+if /I "%1"=="VS2019" goto VS2019Vars
> if /I "%1"=="VS2017" goto VS2017Vars
> if /I "%1"=="VS2015" goto VS2015Vars
> if /I "%1"=="VS2013" goto VS2013Vars
> if /I "%1"=="VS2012" goto VS2012Vars
>
> :set_vsvars
>-for /f "usebackq tokens=1* delims=: " %%i in (`%*`) do (
>- if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>-)
>+if defined VCINSTALLDIR goto :EOF
>+ call %* > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
>+ if /i "%%i"=="installationPath" (
>+ call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>+ )
>+ )
>+ del vswhereInfo
> goto :EOF
>
> :read_vsvars
>@@ -42,19 +48,36 @@ REM (Or invoke the relevant vsvars32 file
>beforehand).
>
> :main
> if defined VCINSTALLDIR goto :done
>+ :VS2019Vars
>+ if exist "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
>+ if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\BuildTools" (
>+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 16,17
>+ ) else (
>+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 16,17
>+ )
>+ )
>+ if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" (
>+ if exist "%ProgramFiles%\Microsoft Visual Studio\2019\BuildTools" (
>+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 16,17
>+ ) else (
>+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 16,17
>+ )
>+ )
>+ if /I "%1"=="VS2019" goto ToolNotInstall
>+
> :VS2017Vars
> if exist "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
> if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
>- call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools
>+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 15,16
> ) else (
>- call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe"
>+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 15,16
> )
> )
> if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" (
> if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
>- call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools
>+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 15,16
> ) else (
>- call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe"
>+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 15,16
> )
> )
> if /I "%1"=="VS2017" goto ToolNotInstall
>diff --git a/BaseTools/set_vsprefix_envs.bat
>b/BaseTools/set_vsprefix_envs.bat
>index 81686f5b63..46b84713a6 100644
>--- a/BaseTools/set_vsprefix_envs.bat
>+++ b/BaseTools/set_vsprefix_envs.bat
>@@ -3,7 +3,7 @@
> @REM however it may be executed directly from the BaseTools project
>folder
> @REM if the file is not executed within a WORKSPACE\BaseTools folder.
> @REM
>-@REM Copyright (c) 2016-2017, Intel Corporation. All rights reserved.<BR>
>+@REM Copyright (c) 2016-2019, Intel Corporation. All rights reserved.<BR>
> @REM
> @REM SPDX-License-Identifier: BSD-2-Clause-Patent
> @REM
>@@ -18,6 +18,7 @@ set SCRIPT_ERROR=1
> goto :EOF
>
> :main
>+if /I "%1"=="VS2019" goto SetVS2019
> if /I "%1"=="VS2017" goto SetVS2017
> if /I "%1"=="VS2015" goto SetVS2015
> if /I "%1"=="VS2013" goto SetVS2013
>@@ -107,27 +108,86 @@ if defined VS140COMNTOOLS (
> )
> if /I "%1"=="VS2015" goto SetWinDDK
>
>+:SetVS2019
>+if not defined VS160COMNTOOLS (
>+ if exist "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
>+ if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\BuildTools" (
>+ call "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 16,17 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
>+ if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>+ )
>+ del vswhereInfo
>+ ) else (
>+ call "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 16,17 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
>+ if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>+ )
>+ del vswhereInfo
>+ )
>+ ) else if exist "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
>+ if exist "%ProgramFiles%\Microsoft Visual Studio\2019\BuildTools" (
>+ call "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -
>products Microsoft.VisualStudio.Product.BuildTools -version 16,17 >
>vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
>+ if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>+ )
>+ del vswhereInfo
>+ ) else (
>+ call "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -
>version 16,17 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
>+ if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
>+ )
>+ del vswhereInfo
>+ )
>+ ) else (
>+ if /I "%1"=="VS2019" goto ToolNotInstall
>+ goto SetWinDDK
>+ )
>+)
>+
>+if defined VCToolsInstallDir (
>+ if not defined VS2019_PREFIX (
>+ set "VS2019_PREFIX=%VCToolsInstallDir%"
>+ )
>+)
>+if not defined WINSDK10_PREFIX (
>+ if defined WindowsSdkVerBinPath (
>+ set "WINSDK10_PREFIX=%WindowsSdkVerBinPath%"
>+ ) else if exist "%ProgramFiles(x86)%\Windows Kits\10\bin" (
>+ set "WINSDK10_PREFIX=%ProgramFiles(x86)%\Windows Kits\10\bin\"
>+ ) else if exist "%ProgramFiles%\Windows Kits\10\bin" (
>+ set "WINSDK10_PREFIX=%ProgramFiles%\Windows Kits\10\bin\"
>+ )
>+)
In my machine, VS2019 is not installed. Then, WindowsSdkVerBinPath is not set.
So, set "WINSDK10_PREFIX=%ProgramFiles(x86)%\Windows Kits\10\bin\"
But, I install VS2017. WINSDK10_PREFIX should be set later.
Here, the suggest change is to move WINSDK10_PREFIX setting into VCToolsInstallDir check condition.
WINSDK10_PREFIX is only set when VCToolsInstallDir is defined.
Thanks
Liming
>+
> :SetVS2017
> if not defined VS150COMNTOOLS (
> if exist "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
> if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
>- for /f "usebackq tokens=1* delims=: " %%i in
>(`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -
>products Microsoft.VisualStudio.Product.BuildTools`) do (
>+ call "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools -version 15,16 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> )
>+ del vswhereInfo
> ) else (
>- for /f "usebackq tokens=1* delims=: " %%i in
>(`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
>+ call "%ProgramFiles(x86)%\Microsoft Visual
>Studio\Installer\vswhere.exe" -version 15,16 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> )
>+ del vswhereInfo
> )
> ) else if exist "%ProgramFiles%\Microsoft Visual
>Studio\Installer\vswhere.exe" (
> if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
>- for /f "usebackq tokens=1* delims=: " %%i in
>(`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -products
>Microsoft.VisualStudio.Product.BuildTools`) do (
>+ call "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -
>products Microsoft.VisualStudio.Product.BuildTools -version 15,16 >
>vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> )
>+ del vswhereInfo
> ) else (
>- for /f "usebackq tokens=1* delims=: " %%i in
>(`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
>+ call "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -
>version 15,16 > vswhereInfo
>+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> )
>+ del vswhereInfo
> )
> ) else (
> if /I "%1"=="VS2017" goto ToolNotInstall
>diff --git a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat
>index 395694fa09..61ebf4ae09 100755
>--- a/BaseTools/toolsetup.bat
>+++ b/BaseTools/toolsetup.bat
>@@ -3,7 +3,7 @@
> @REM however it may be executed directly from the BaseTools project
>folder
> @REM if the file is not executed within a WORKSPACE\BaseTools folder.
> @REM
>-@REM Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
>+@REM Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> @REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> @REM
> @REM SPDX-License-Identifier: BSD-2-Clause-Patent
>@@ -42,6 +42,12 @@ if /I "%1"=="/?" goto Usage
> set FORCE_REBUILD=TRUE
> goto loop
> )
>+ if /I "%1"=="VS2019" (
>+ shift
>+ set VS2019=TRUE
>+ set VSTool=VS2019
>+ goto loop
>+ )
> if /I "%1"=="VS2017" (
> shift
> set VS2017=TRUE
>@@ -176,7 +182,9 @@ IF NOT exist
>"%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
> @echo.
> goto end
> )
>-if defined VS2017 (
>+if defined VS2019 (
>+ call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2019
>+) else if defined VS2017 (
> call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2017
> ) else if defined VS2015 (
> call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2015
>@@ -444,7 +452,7 @@ goto end
>
> :Usage
> @echo.
>- echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild |
>ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]] [VS2017]
>[VS2015] [VS2013] [VS2012]"
>+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild |
>ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]] [VS2019]
>[VS2017] [VS2015] [VS2013] [VS2012]"
> @echo.
> @echo base_tools_path BaseTools project path, BASE_TOOLS_PATH
>will be set to this path.
> @echo edk_tools_path EDK_TOOLS_PATH will be set to this path.
>@@ -457,12 +465,14 @@ goto end
> @echo VS2013 Set the env for VS2013 build.
> @echo VS2015 Set the env for VS2015 build.
> @echo VS2017 Set the env for VS2017 build.
>+ @echo VS2019 Set the env for VS2019 build.
> @echo.
>
> :end
> set REBUILD=
> set FORCE_REBUILD=
> set RECONFIG=
>+set VS2019=
> set VS2017=
> set VS2015=
> set VS2013=
>diff --git a/edksetup.bat b/edksetup.bat
>index 5f6028deff..024f57a4b7 100755
>--- a/edksetup.bat
>+++ b/edksetup.bat
>@@ -1,7 +1,7 @@
> @REM @file
> @REM Windows batch file to setup a WORKSPACE environment
> @REM
>-@REM Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
>+@REM Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> @REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> @REM SPDX-License-Identifier: BSD-2-Clause-Patent
> @REM
>@@ -133,6 +133,7 @@ if defined CYGWIN_HOME (
> :cygwin_done
> if /I "%1"=="Rebuild" shift
> if /I "%1"=="ForceRebuild" shift
>+if /I "%1"=="VS2019" shift
> if /I "%1"=="VS2017" shift
> if /I "%1"=="VS2015" shift
> if /I "%1"=="VS2013" shift
>@@ -141,7 +142,7 @@ if "%1"=="" goto end
>
> :Usage
> @echo.
>- @echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig] [Rebuild]
>[ForceRebuild] [VS2017] [VS2015] [VS2013] [VS2012]"
>+ @echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig] [Rebuild]
>[ForceRebuild] [VS2019] [VS2017] [VS2015] [VS2013] [VS2012]"
> @echo.
> @echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.
> @echo Rebuild Perform incremental rebuild of BaseTools binaries.
>@@ -150,6 +151,7 @@ if "%1"=="" goto end
> @echo VS2013 Set the env for VS2013 build.
> @echo VS2015 Set the env for VS2015 build.
> @echo VS2017 Set the env for VS2017 build.
>+ @echo VS2019 Set the env for VS2019 build.
> @echo.
> @echo Note that target.template, tools_def.template and
>build_rules.template
> @echo will only be copied to target.txt, tools_def.txt and build_rule.txt
>--
>2.21.0.windows.1
next prev parent reply other threads:[~2019-09-19 8:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 3:16 [PATCH v2 0/2] *** Add VS2019 Support *** Cheng, Ching JenX
2019-09-17 3:16 ` [PATCH v2 1/2] Add VS2019 Toolchain def Cheng, Ching JenX
2019-09-17 6:31 ` [edk2-devel] " Pete Batard
2019-09-17 3:16 ` [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches Cheng, Ching JenX
2019-09-19 8:23 ` Liming Gao [this message]
2019-09-19 8:37 ` Cheng, Ching JenX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A89E2EF3DFEDB4C8BFDE51014F606A14E4FE77E@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox