From: "Pete Batard" <pete@akeo.ie>
To: Jeremy Linton <jeremy.linton@arm.com>, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com,
samer.el-haj-mahmoud@arm.com, awarkentin@vmware.com
Subject: Re: [PATCH 2/3] Platform/RaspberryPi/AcpiTables: Add further named components
Date: Thu, 8 Apr 2021 10:48:06 +0100 [thread overview]
Message-ID: <4cdf830d-3a99-9f85-28a7-bc749247fc1b@akeo.ie> (raw)
In-Reply-To: <20210408055843.2883563-3-jeremy.linton@arm.com>
On 2021.04.08 06:58, Jeremy Linton wrote:
> Add some additional IORT nodes for the USB & EMMC devices, realistically
> we probably only need to have a single node with the lowest AddressSizeLimit
> but this is conceptually "cleaner" should anyone actually try and use these
> values rather than the _DMA provided ones.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> Platform/RaspberryPi/AcpiTables/Iort.aslc | 44 ++++++++++++++++++++++++++++++-
> 1 file changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/Platform/RaspberryPi/AcpiTables/Iort.aslc b/Platform/RaspberryPi/AcpiTables/Iort.aslc
> index 00720194bb..810307ae37 100644
> --- a/Platform/RaspberryPi/AcpiTables/Iort.aslc
> +++ b/Platform/RaspberryPi/AcpiTables/Iort.aslc
> @@ -20,6 +20,8 @@ typedef struct {
> typedef struct {
>
> EFI_ACPI_6_0_IO_REMAPPING_TABLE Iort;
>
> RPI4_NC_NODE NamedCompNode;
>
> + RPI4_NC_NODE NamedCompNode2;
>
> + RPI4_NC_NODE NamedCompNode3;
>
> } RPI4_IO_REMAPPING_STRUCTURE;
>
>
>
> STATIC RPI4_IO_REMAPPING_STRUCTURE Iort = {
>
> @@ -27,7 +29,7 @@ STATIC RPI4_IO_REMAPPING_STRUCTURE Iort = {
> ACPI_HEADER (EFI_ACPI_6_0_IO_REMAPPING_TABLE_SIGNATURE,
>
> RPI4_IO_REMAPPING_STRUCTURE,
>
> EFI_ACPI_IO_REMAPPING_TABLE_REVISION),
>
> - 1, // NumNodes
>
> + 3, // NumNodes
>
> sizeof (EFI_ACPI_6_0_IO_REMAPPING_TABLE), // NodeOffset
>
> 0 // Reserved
>
> }, {
>
> @@ -50,6 +52,46 @@ STATIC RPI4_IO_REMAPPING_STRUCTURE Iort = {
> }, {
>
> "\\_SB_.SCB0.XHC0" // ObjectName
>
> }
>
> + }, {
>
> + // gpu/dwc usb named component node
>
> + {
>
> + {
>
> + EFI_ACPI_IORT_TYPE_NAMED_COMP, // Type
>
> + sizeof (RPI4_NC_NODE), // Length
>
> + 0x0, // Revision
>
> + 0x0, // Reserved
>
> + 0x0, // NumIdMappings
>
> + 0x0, // IdReference
>
> + },
>
> + 0x0, // Flags
>
> + 0x0, // CacheCoherent
>
> + 0x0, // AllocationHints
>
> + 0x0, // Reserved
>
> + 0x0, // MemoryAccessFlags
>
> + 30, // AddressSizeLimit
>
> + }, {
>
> + "\\_SB_.GDV0.USB0" // ObjectName
>
> + }
>
> + }, {
>
> + // emmc2 named component node
>
> + {
>
> + {
>
> + EFI_ACPI_IORT_TYPE_NAMED_COMP, // Type
>
> + sizeof (RPI4_NC_NODE), // Length
>
> + 0x0, // Revision
>
> + 0x0, // Reserved
>
> + 0x0, // NumIdMappings
>
> + 0x0, // IdReference
>
> + },
>
> + 0x0, // Flags
>
> + 0x0, // CacheCoherent
>
> + 0x0, // AllocationHints
>
> + 0x0, // Reserved
>
> + 0x0, // MemoryAccessFlags
>
> + 30, // AddressSizeLimit
>
> + }, {
>
> + "\\_SB_.GDV1.SDC3" // ObjectName
>
> + }
>
> }
>
> };
>
>
>
Reviewed-by: Pete Batard <pete@akeo.ie>
next prev parent reply other threads:[~2021-04-08 9:48 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-08 5:58 [PATCH 0/3] SD+USB perf/DMA fixes Jeremy Linton
2021-04-08 5:58 ` [PATCH 1/3] Platform/RaspberryPi/Acpitables: Enable Arasan hispeed mode Jeremy Linton
2021-04-08 9:48 ` Pete Batard
2021-04-08 14:17 ` Andrei Warkentin
2021-05-10 16:41 ` Samer El-Haj-Mahmoud
2021-05-10 16:41 ` Samer El-Haj-Mahmoud
2021-05-10 16:41 ` Samer El-Haj-Mahmoud
2021-04-08 5:58 ` [PATCH 2/3] Platform/RaspberryPi/AcpiTables: Add further named components Jeremy Linton
2021-04-08 9:48 ` Pete Batard [this message]
2021-05-10 16:41 ` Samer El-Haj-Mahmoud
2021-04-08 14:17 ` Andrei Warkentin
2021-05-10 16:42 ` Samer El-Haj-Mahmoud
2021-05-10 16:41 ` Samer El-Haj-Mahmoud
2021-04-08 5:58 ` [PATCH 3/3] Platform/RaspberryPi/AcpiTables: Correct _DMA consumer Jeremy Linton
2021-04-08 9:48 ` Pete Batard
2021-05-10 16:43 ` Samer El-Haj-Mahmoud
2021-04-08 14:23 ` Andrei Warkentin
2021-04-13 16:44 ` Samer El-Haj-Mahmoud
[not found] ` <167578A6C978A75F.9301@groups.io>
2021-04-29 14:02 ` [edk2-devel] " Samer El-Haj-Mahmoud
[not found] ` <167A591C4A42BD1B.6294@groups.io>
2021-04-30 18:05 ` Samer El-Haj-Mahmoud
2021-05-10 16:42 ` Samer El-Haj-Mahmoud
2021-05-10 16:43 ` Samer El-Haj-Mahmoud
2021-04-08 14:24 ` [PATCH 0/3] SD+USB perf/DMA fixes Andrei Warkentin
2021-04-30 18:28 ` Samer El-Haj-Mahmoud
[not found] ` <167AB62D787B8F90.7155@groups.io>
2021-05-10 16:40 ` [edk2-devel] " Samer El-Haj-Mahmoud
2021-04-30 20:30 ` Andrei Warkentin
2021-05-10 16:39 ` [edk2-devel] " Samer El-Haj-Mahmoud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4cdf830d-3a99-9f85-28a7-bc749247fc1b@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox