From: "Michael Kubacki" <mikuback@linux.microsoft.com>
To: devel@edk2.groups.io, hao.a.wu@intel.com
Cc: "Wang, Jian J" <jian.j.wang@intel.com>,
"Gao, Liming" <gaoliming@byosoft.com.cn>
Subject: Re: [edk2-devel] [PATCH v1 0/3] Add Variable Flash Info HOB
Date: Fri, 8 Apr 2022 17:20:47 -0400 [thread overview]
Message-ID: <4f1d5f1f-bdc9-4cb7-28f8-885d6a257336@linux.microsoft.com> (raw)
In-Reply-To: <c50a90f2-b743-cbfe-4bcc-af101116f297@linux.microsoft.com>
Hi Hao,
I addressed all of your feedback including abstraction of the
information with a library API in v2. It did help clean up the
consumption code quite a bit.
https://edk2.groups.io/g/devel/message/88649
Thanks,
Michael
On 4/7/2022 7:56 PM, Michael Kubacki wrote:
> Yes, I considered that as well but I was not sure if it was worth adding
> a new library just for that. I agree though that the code should not be
> duplicated. I will look into it and include your other suggestions in a
> v2 series.
>
> Thanks,
> Michael
>
> On 4/6/2022 11:31 PM, Wu, Hao A wrote:
>> Sorry for a question:
>> GetVariableFlashInfo() seems being defined multiple times across
>> modules, do you see value in abstracting it as a library API?
>>
>> Best Regards,
>> Hao Wu
>>
>>> -----Original Message-----
>>> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Michael
>>> Kubacki
>>> Sent: Thursday, April 7, 2022 12:27 AM
>>> To: devel@edk2.groups.io
>>> Cc: Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A
>>> <hao.a.wu@intel.com>;
>>> Gao, Liming <gaoliming@byosoft.com.cn>
>>> Subject: [edk2-devel] [PATCH v1 0/3] Add Variable Flash Info HOB
>>>
>>> From: Michael Kubacki <michael.kubacki@microsoft.com>
>>>
>>> REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
>>>
>>> The UEFI variable drivers such as VariableRuntimeDxe, VariableSmm,
>>> VariableStandaloneMm, etc. (and their dependent protocol/library
>>> stack), typically acquire UEFI variable store flash information
>>> with PCDs declared in MdeModulePkg.
>>>
>>> For example:
>>> [Pcd]
>>> gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
>>> gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
>>> gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
>>>
>>> These PCDs work as-is in the StandaloneMm driver if they are not
>>> dynamic such as Dynamic or DynamicEx because PCD services are not
>>> readily available in the Standalone MM environment. Platforms that
>>> use Standalone MM today, must define these PCDs as FixedAtBuild in
>>> their platform build. However, the PCDs do allow platforms to treat
>>> the PCDs as Dynamic/DynamicEx and being able to support that is
>>> currently a gap for Standalone MM.
>>>
>>> This patch series introduces a HOB that can be produced by the
>>> platform to provide the same information. The HOB list is
>>> available to Standalone MM.
>>>
>>> The PCD declarations are left as-is in MdeModulePkg for backward
>>> compatibility. This means unless a platform wants to use the HOB,
>>> their code will continue to work with no change (they do not need
>>> to produce the HOB). Only if the HOB is found, is its value used
>>> instead of the PCDs.
>>>
>>> Cc: Jian J Wang <jian.j.wang@intel.com>
>>> Cc: Hao A Wu <hao.a.wu@intel.com>
>>> Cc: Liming Gao <gaoliming@byosoft.com.cn>
>>> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com
>>>
>>> Michael Kubacki (3):
>>> MdeModulePkg: Add Variable Flash Info HOB
>>> MdeModulePkg/Variable: Consume Variable Info HOB
>>> MdeModulePkg/FaultTolerantWrite: Consume Variable Info HOB
>>>
>>>
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/FtwMisc.c
>>> |
>>> 111 +++++++++++++++++---
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/UpdateWorkingBlock.c
>>> | 7 +-
>>> MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.c
>>> | 92 ++++++++++++++--
>>>
>>> MdeModulePkg/Universal/Variable/Pei/Variable.c
>>> | 66
>>> +++++++++++-
>>>
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
>>> | 42
>>> ++++++++
>>>
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
>>> |
>>> 25 ++++-
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableNonVolatile.c
>>> | 20 +++-
>>>
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
>>> |
>>> 20 +++-
>>>
>>> MdeModulePkg/Include/Guid/VariableFlashInfo.h
>>> | 36
>>> +++++++
>>>
>>> MdeModulePkg/MdeModulePkg.dec
>>> | 4 +
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWrite.h
>>> | 9 +-
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
>>> | 11 +-
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
>>> | 11 +-
>>>
>>> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteStandalon
>>> eMm.inf | 11 +-
>>> MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
>>> | 10 +-
>>>
>>> MdeModulePkg/Universal/Variable/Pei/Variable.h
>>> | 2 +
>>>
>>> MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
>>> | 6 +-
>>>
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
>>> | 17
>>> +++
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
>>> | 6 +-
>>>
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
>>> |
>>> 6 +-
>>> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.inf
>>> | 6 +-
>>> 21 files changed, 455 insertions(+), 63 deletions(-)
>>> create mode 100644 MdeModulePkg/Include/Guid/VariableFlashInfo.h
>>>
>>> --
>>> 2.28.0.windows.1
>>>
>>>
>>>
>>> -=-=-=-=-=-=
>>> Groups.io Links: You receive all messages sent to this group.
>>> View/Reply Online (#88461): https://edk2.groups.io/g/devel/message/88461
>>> Mute This Topic: https://groups.io/mt/90293658/1768737
>>> Group Owner: devel+owner@edk2.groups.io
>>> Unsubscribe: https://edk2.groups.io/g/devel/unsub [hao.a.wu@intel.com]
>>> -=-=-=-=-=-=
>>>
>>
>>
>>
>>
>>
prev parent reply other threads:[~2022-04-08 21:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 16:26 [PATCH v1 0/3] Add Variable Flash Info HOB Michael Kubacki
2022-04-06 16:26 ` [PATCH v1 1/3] MdeModulePkg: " Michael Kubacki
2022-04-06 16:26 ` [PATCH v1 2/3] MdeModulePkg/Variable: Consume Variable " Michael Kubacki
2022-04-07 3:31 ` [edk2-devel] " Wu, Hao A
2022-04-06 16:26 ` [PATCH v1 3/3] MdeModulePkg/FaultTolerantWrite: " Michael Kubacki
2022-04-07 3:31 ` [edk2-devel] " Wu, Hao A
2022-04-07 3:31 ` [edk2-devel] [PATCH v1 0/3] Add Variable Flash " Wu, Hao A
2022-04-07 23:56 ` Michael Kubacki
2022-04-08 21:20 ` Michael Kubacki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4f1d5f1f-bdc9-4cb7-28f8-885d6a257336@linux.microsoft.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox