From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: edk2-devel-groups-io <devel@edk2.groups.io>,
Leif Lindholm <leif.lindholm@linaro.org>,
Laszlo Ersek <lersek@redhat.com>
Subject: Re: [PATCH v2] ArmVirtPkg: increase FD/FV size for NOOPT builds
Date: Thu, 12 Sep 2019 19:05:35 +0200 [thread overview]
Message-ID: <5141ec32-a51d-3ec6-79ef-ceec43b32c84@redhat.com> (raw)
In-Reply-To: <CAKv+Gu_x9p7whYmYo5SUtNjTm0Z+a4MTsV8KMQKgvxwVjcD_1w@mail.gmail.com>
On 9/12/19 6:50 PM, Ard Biesheuvel wrote:
> On Thu, 12 Sep 2019 at 16:20, Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
>>
>> Hi Ard,
>>
>> On 9/11/19 6:23 PM, Ard Biesheuvel wrote:
>>> After upgrading the CI system we use for building the ArmVirtPkg
>>> targets, we started seeing failures due to the NOOPT build running
>>> out of space when using the CLANG38 toolchain definition combined
>>> with clang 7.
>>>
>>> We really don't want to increase the FD/FV sizes in general to
>>> accommodate this, so parameterize the relevant quantities and
>>> increase them by 50% for NOOPT builds.
>>>
>>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>>> ---
>>> v2: implement suggestions by Laszlo on 1) how to parameterize this further,
>>> and b) to avoid adding another .inc file
>>> update kernel header field, as pointed out by Philippe
>>>
>>> ArmVirtPkg/ArmVirt.dsc.inc | 28 ++++++++++++++++++++
>>> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++---
>>> ArmVirtPkg/ArmVirtQemuKernel.fdf | 19 ++++++++++---
>>> ArmVirtPkg/ArmVirtXen.fdf | 14 +++++++---
>>> 4 files changed, 66 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
>>> index a4ae25d982a2..d6b58e5c018b 100644
>>> --- a/ArmVirtPkg/ArmVirt.dsc.inc
>>> +++ b/ArmVirtPkg/ArmVirt.dsc.inc
>>> @@ -10,6 +10,34 @@
>>> [Defines]
>>> DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
>>>
>>> + #
>>> + # Flash size selection. Setting FD_SIZE_IN_KB on the command line directly to
>>> + # one of the supported values, in place of any of the convenience macros, is
>>> + # permitted.
>>> + #
>>> +!if $(TARGET) == NOOPT
>>> + DEFINE FD_SIZE_3MB = TRUE
>>> +!endif
>>> +
>>> +!ifdef $(FD_SIZE_2MB)
>>> + DEFINE FD_SIZE_IN_KB = 2048
>>> +!else
>>> +!ifdef $(FD_SIZE_3MB)
>>> + DEFINE FD_SIZE_IN_KB = 3072
>>> +!else
>>> + DEFINE FD_SIZE_IN_KB = 2048
>>> +!endif
>>> +!endif
>>> +
>>> +!if $(FD_SIZE_IN_KB) == 2048
>>> + DEFINE FD_SIZE = 0x200000
>>> + DEFINE FD_NUM_BLOCKS = 0x200
>>> +!endif
>>> +!if $(FD_SIZE_IN_KB) == 3072
>>> + DEFINE FD_SIZE = 0x300000
>>> + DEFINE FD_NUM_BLOCKS = 0x300
>>> +!endif
>>> +
>>> [BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
>>> GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000
>>>
>>> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
>>> index c2169cb7964b..d3950c8be05e 100644
>>> --- a/ArmVirtPkg/ArmVirtQemu.fdf
>>> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
>>> @@ -20,14 +20,22 @@
>>> #
>>> ################################################################################
>>>
>>> +[Defines]
>>> +!if $(FD_SIZE_IN_KB) == 2048
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
>>> +!endif
>>> +!if $(FD_SIZE_IN_KB) == 3072
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
>>> +!endif
>>> +
>>> [FD.QEMU_EFI]
>>> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
>>> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
>>> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
>>> ErasePolarity = 1
>>>
>>> # This one is tricky, it must be: BlockSize * NumBlocks = Size
>>> BlockSize = 0x00001000
>>> -NumBlocks = 0x200
>>> +NumBlocks = $(FD_NUM_BLOCKS)
>>>
>>> ################################################################################
>>> #
>>> @@ -59,7 +67,7 @@ DATA = {
>>> !endif
>>> }
>>>
>>> -0x00001000|0x001ff000
>>> +0x00001000|$(FVMAIN_COMPACT_SIZE)
>>> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
>>> FV = FVMAIN_COMPACT
>>>
>>> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
>>> index f675b6d65ee1..46ec967e1cc0 100644
>>> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
>>> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
>>> @@ -20,14 +20,22 @@
>>> #
>>> ################################################################################
>>>
>>> +[Defines]
>>> +!if $(FD_SIZE_IN_KB) == 2048
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
>>> +!endif
>>> +!if $(FD_SIZE_IN_KB) == 3072
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
>>> +!endif
>>> +
>>> [FD.QEMU_EFI]
>>> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
>>> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
>>> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
>>> ErasePolarity = 1
>>>
>>> # This one is tricky, it must be: BlockSize * NumBlocks = Size
>>> BlockSize = 0x00001000
>>> -NumBlocks = 0x200
>>> +NumBlocks = $(FD_NUM_BLOCKS)
>>>
>>> ################################################################################
>>> #
>>> @@ -56,7 +64,12 @@ DATA = {
>>> 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
>>> 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
>>> 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
>>> +!if $(FD_SIZE_IN_KB) == 2048
>>> 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
>>> +!endif
>>> +!if $(FD_SIZE_IN_KB) == 3072
>>> + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
>>> +!endif
>>
>> Ah, I was thinking of some inplace endian swapping
>>
>
> If you can make it work, patches welcome :-)
I was thinking of this:
0xf6, 0x1f, 0x00, 0xea, # b 0x8000
0x18, 0x28, 0x6f, 0x01, # magic
0x00, 0x00, 0x00, 0x00, # start
((($(FD_SIZE)) & 0x000000ff) << 24), # image size
((($(FD_SIZE)) & 0x0000ff00) << 8),
((($(FD_SIZE)) & 0x00ff0000) >> 8),
((($(FD_SIZE)) & 0xff000000) >> 24),
0x01, 0x02, 0x03, 0x04 # endiannness flag
But now that I look at it, I realize it is uglier to review than your
if/endif...
>>> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
>>> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
>>> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
>>> @@ -81,7 +94,7 @@ DATA = {
>>
>> You forgot Aarch32:
>>
>> 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
>>
>> 0x01, 0x02, 0x03, 0x04 # endiannness flag
>>
>>
>>> !endif
>>> }
>>>
>>> -0x00008000|0x001f8000
>>> +0x00008000|$(FVMAIN_COMPACT_SIZE)
>>> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
>>> FV = FVMAIN_COMPACT
>>>
>>> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
>>> index 79f681cde028..2bbb64abde6b 100644
>>> --- a/ArmVirtPkg/ArmVirtXen.fdf
>>> +++ b/ArmVirtPkg/ArmVirtXen.fdf
>>
>> Same 'image size' changes apply to this file too :(
>>
>
> Thanks for spotting that.
>
>>> @@ -20,14 +20,22 @@
>>> #
>>> ################################################################################
>>>
>>> +[Defines]
>>> +!if $(FD_SIZE_IN_KB) == 2048
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
>>> +!endif
>>> +!if $(FD_SIZE_IN_KB) == 3072
>>> + DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
>>> +!endif
>>> +
>>> [FD.XEN_EFI]
>>> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
>>> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
>>> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
>>> ErasePolarity = 1
>>>
>>> # This one is tricky, it must be: BlockSize * NumBlocks = Size
>>> BlockSize = 0x00001000
>>> -NumBlocks = 0x200
>>> +NumBlocks = $(FD_NUM_BLOCKS)
>>>
>>> ################################################################################
>>> #
>>> @@ -81,7 +89,7 @@ DATA = {
>>> !endif
>>> }
>>>
>>> -0x00002000|0x001fe000
>>> +0x00002000|$(FVMAIN_COMPACT_SIZE)
>>> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
>>> FV = FVMAIN_COMPACT
>>>
>>>
next prev parent reply other threads:[~2019-09-12 17:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-11 16:23 [PATCH v2] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-12 14:46 ` Laszlo Ersek
2019-09-12 14:47 ` Laszlo Ersek
2019-09-12 14:53 ` Ard Biesheuvel
2019-09-12 15:20 ` Philippe Mathieu-Daudé
2019-09-12 16:50 ` Ard Biesheuvel
2019-09-12 17:05 ` Philippe Mathieu-Daudé [this message]
2019-09-12 17:13 ` Ard Biesheuvel
2019-09-12 17:14 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5141ec32-a51d-3ec6-79ef-ceec43b32c84@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox