From: "Jeremy Linton" <jeremy.linton@arm.com>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: edk2-devel-groups-io <devel@edk2.groups.io>,
Adrien Thierry <athierry@redhat.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Leif Lindholm <leif@nuviainc.com>, Pete Batard <pete@akeo.ie>
Subject: Re: [edk2-devel] [edk2-platforms PATCH] Platform/RaspberryPi: Add 'clock-frequency' property for miniuart
Date: Mon, 31 Jan 2022 23:40:54 -0600 [thread overview]
Message-ID: <5244e9cd-546c-43ee-26f6-434b8ed301c3@arm.com> (raw)
In-Reply-To: <CAMj1kXG3RufTUCW7bEhZx=Jmvaedjj9p3+BNuAFiucy1cKYX2w@mail.gmail.com>
On 1/31/22 11:36, Ard Biesheuvel wrote:
> On Mon, 31 Jan 2022 at 17:13, Jeremy Linton <jeremy.linton@arm.com> wrote:
>>
>> Hi,
>>
>> On 1/28/22 09:38, Adrien Thierry via groups.io wrote:
>>> Describe the miniuart clock frequency in a _DSD property, so that it can
>>> be read from the Linux driver.
>>>
>>> The miniuart clock frequency is the core clock frequency on the
>>> Raspberry Pi. It can be modified by the user using the 'core_freq'
>>> property in the config.txt file. So, we fetch it from the underlying
>>> Raspberry Pi firmware.
>>
>> Sorry about the delay, I've been out a bit.
>>
>> So, this all looks good to me, and it passes the patch checker, the
>> trick now will be landing the linux patch.
>>
>>
>> Thanks,
>>
>> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
>>
>
> Thanks. Could this be resent without whitespace damage please?
> Also, a link the to Linux patch would be helpful.
Hmm, I've had that problem a couple times too with these postings,
although it usually appeared to be something groups.io was doing because
direct cc's to myself were correct. I've got a little script to remove
the double lines, which is what I ran this through before git am'ing it.
>
>
>>
>>
>>>
>>> Signed-off-by: Adrien Thierry <athierry@redhat.com>
>>> ---
>>> Platform/RaspberryPi/AcpiTables/Uart.asl | 14 ++++++++++++++
>>> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
>>> .../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
>>> Platform/RaspberryPi/RPi3/RPi3.dsc | 5 +++++
>>> Platform/RaspberryPi/RPi4/RPi4.dsc | 5 +++++
>>> Platform/RaspberryPi/RaspberryPi.dec | 1 +
>>> 6 files changed, 35 insertions(+)
>>>
>>> diff --git a/Platform/RaspberryPi/AcpiTables/Uart.asl b/Platform/RaspberryPi/AcpiTables/Uart.asl
>>> index 974f06d3bc..ef5165be98 100644
>>> --- a/Platform/RaspberryPi/AcpiTables/Uart.asl
>>> +++ b/Platform/RaspberryPi/AcpiTables/Uart.asl
>>> @@ -77,6 +77,20 @@ Device (URTM)
>>> MEMORY32SETBASE (RBUF, RMEM, RBAS, BCM2836_MINI_UART_OFFSET)
>>>
>>> Return (^RBUF)
>>>
>>> }
>>>
>>> +
>>>
>>> + //
>>>
>>> + // Mini Uart Clock Rate will be dynamically updated during boot
>>>
>>> + // 0x4D 0x55 0x43 0x52 0xC 0x1000000 (Value must be > 16777215)
>>>
>>> + //
>>>
>>> + Name (MUCR, 0x1000000)
>>>
>>> +
>>>
>>> + Name (_DSD, Package ()
>>>
>>> + {
>>>
>>> + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package ()
>>>
>>> + {
>>>
>>> + Package (2) { "clock-frequency", MUCR },
>>>
>>> + }
>>>
>>> + })
>>>
>>> }
>>>
>>>
>>>
>>> //
>>>
>>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>>> index 415d99fadb..3dcf2bac0d 100644
>>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>>> @@ -44,6 +44,7 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
>>> STATIC UINT32 mModelFamily = 0;
>>>
>>> STATIC UINT32 mModelInstalledMB = 0;
>>>
>>> STATIC UINT32 mModelRevision = 0;
>>>
>>> +STATIC UINT32 mCoreClockRate = 0;
>>>
>>>
>>>
>>> STATIC EFI_MAC_ADDRESS mMacAddress;
>>>
>>>
>>>
>>> @@ -798,6 +799,7 @@ STATIC CONST AML_NAME_OP_REPLACE SsdtEmmcNameOpReplace[] = {
>>>
>>>
>>> STATIC CONST AML_NAME_OP_REPLACE DsdtNameOpReplace[] = {
>>>
>>> { "URIU", PcdToken (PcdUartInUse) },
>>>
>>> + { "MUCR", PcdToken (PcdMiniUartClockRate) },
>>>
>>> { }
>>>
>>> };
>>>
>>>
>>>
>>> @@ -944,6 +946,13 @@ ConfigInitialize (
>>> DEBUG ((DEBUG_INFO, "Current Raspberry Pi revision %x\n", mModelRevision));
>>>
>>> }
>>>
>>>
>>>
>>> + Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_CORE, &mCoreClockRate);
>>>
>>> + if (Status != EFI_SUCCESS) {
>>>
>>> + DEBUG ((DEBUG_ERROR, "Couldn't get the Raspberry Pi core clock rate: %r\n", Status));
>>>
>>> + } else {
>>>
>>> + PcdSet32S (PcdMiniUartClockRate, mCoreClockRate);
>>>
>>> + }
>>>
>>> +
>>>
>>> Status = SetupVariables ();
>>>
>>> if (Status != EFI_SUCCESS) {
>>>
>>> DEBUG ((DEBUG_ERROR, "Couldn't not setup NV vars: %r\n", Status));
>>>
>>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
>>> index e6e22ad82e..6f6e8f42ac 100644
>>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
>>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
>>> @@ -95,6 +95,7 @@
>>> gRaspberryPiTokenSpaceGuid.PcdFanTemp
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdUartInUse
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdXhciPci
>>>
>>> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate
>>>
>>>
>>>
>>> [Depex]
>>>
>>> gPcdProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
>>>
>>> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
>>> index 6ab5d1ae6d..6dc48dc233 100644
>>> --- a/Platform/RaspberryPi/RPi3/RPi3.dsc
>>> +++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
>>> @@ -561,6 +561,11 @@
>>> #
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdUartInUse|1
>>>
>>>
>>>
>>> + #
>>>
>>> + # Mini-UART clock rate
>>>
>>> + #
>>>
>>> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|250000000
>>>
>>> +
>>>
>>> ################################################################################
>>>
>>> #
>>>
>>> # Components Section - list of all EDK II Modules needed by this Platform
>>>
>>> diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
>>> index 44ed60ab2f..a9c0c36bb1 100644
>>> --- a/Platform/RaspberryPi/RPi4/RPi4.dsc
>>> +++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
>>> @@ -580,6 +580,11 @@
>>> #
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdUartInUse|0
>>>
>>>
>>>
>>> + #
>>>
>>> + # Mini-UART clock rate
>>>
>>> + #
>>>
>>> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|500000000
>>>
>>> +
>>>
>>> ################################################################################
>>>
>>> #
>>>
>>> # Components Section - list of all EDK II Modules needed by this Platform
>>>
>>> diff --git a/Platform/RaspberryPi/RaspberryPi.dec b/Platform/RaspberryPi/RaspberryPi.dec
>>> index 797be59274..17b6061a05 100644
>>> --- a/Platform/RaspberryPi/RaspberryPi.dec
>>> +++ b/Platform/RaspberryPi/RaspberryPi.dec
>>> @@ -72,3 +72,4 @@
>>> gRaspberryPiTokenSpaceGuid.PcdMmcEnableDma|0|UINT32|0x0000001F
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdUartInUse|1|UINT32|0x00000021
>>>
>>> gRaspberryPiTokenSpaceGuid.PcdXhciPci|0|UINT32|0x00000022
>>>
>>> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|0|UINT32|0x00000023
>>>
>>
next prev parent reply other threads:[~2022-02-01 5:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-28 15:38 [edk2-platforms PATCH] Platform/RaspberryPi: Add 'clock-frequency' property for miniuart Adrien Thierry
2022-01-29 15:19 ` [edk2-devel] " Ard Biesheuvel
2022-01-31 12:34 ` Leif Lindholm
2022-01-31 16:12 ` [edk2-devel] " Jeremy Linton
2022-01-31 17:36 ` Ard Biesheuvel
2022-01-31 21:33 ` Adrien Thierry
2022-01-31 22:20 ` Ard Biesheuvel
2022-02-01 5:40 ` Jeremy Linton [this message]
2022-02-01 19:21 ` Adrien Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5244e9cd-546c-43ee-26f6-434b8ed301c3@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox