From: "Fan, Jeff" <jeff.fan@intel.com>
To: Laszlo Ersek <lersek@redhat.com>,
"Duran, Leo" <leo.duran@amd.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@ml01.01.org>
Cc: "Gao, Liming" <liming.gao@intel.com>
Subject: Re: [v3] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib library
Date: Mon, 31 Oct 2016 06:40:37 +0000 [thread overview]
Message-ID: <542CF652F8836A4AB8DBFAAD40ED192A4A2BB7EA@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <30b3a6ed-4387-7caf-3e3a-9f7e242944e5@redhat.com>
Leo,
Reviewed-by: Jeff Fan <jeff.fan@intel.com> based on Mike's updating.
Could you refine the final patch and send out for testing(requested by Laszlo)? And then I could check-in it also.
Thanks!
Jeff
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Laszlo Ersek
Sent: Saturday, October 29, 2016 5:48 AM
To: Duran, Leo; Kinney, Michael D; edk2-devel@lists.01.org
Cc: Fan, Jeff; Gao, Liming
Subject: Re: [edk2] [v3] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib library
On 10/28/16 23:17, Duran, Leo wrote:
> Replies below.
> Thanks.
>
>> -----Original Message-----
>> From: Kinney, Michael D [mailto:michael.d.kinney@intel.com]
>> Sent: Friday, October 28, 2016 4:12 PM
>> To: Duran, Leo <leo.duran@amd.com>; edk2-devel@lists.01.org
>> Cc: Gao, Liming <liming.gao@intel.com>; lersek@redhat.com; Fan, Jeff
>> <jeff.fan@intel.com>
>> Subject: RE: [v3] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib
>> library
>>
>> Leo,
>>
>> I tested your patch on Quark and it builds and boots.
>>
>> Here is a slightly updated version of the patch that makes the following
>> changes:
>>
>> * Follow Jeff Fan suggestion to pass in Package, Core, Thread as 3
>> parameters.
>> This removes the dependency on PiPei.h and MpService.h from
>> LocalApicLib.h
>> so LocalApicLib can be used from more than just PEI/DXE phases. I also
>> made
>> these three OUT parameters OPTIONAL.
>> * Change tabs to spaces and fix other minor format issues to pass checks
>> from
>> BaseTools/Scripts/PatchCheck.py
>>
>> I have also tested this updated patch on Quark and it also builds and boots.
>>
>>
> [Duran, Leo]
> Sounds a good thing!
> (I assume Lazlo will probably test this as well)
If Mike thinks the changes warrant it, I certainly can (could be next
week), but for that, I'd need a regularly formatted & mailed patch, one
that I can apply with "git am" from the list.
Thanks
Laszlo
> Thanks Mike.
> Leo.
>
>>
>> From cc932ca811e052a0a3ae103a9db9614b3807d4ed Mon Sep 17 00:00:00
>> 2001
>> From: Leo Duran <leo.duran@amd.com>
>> Date: Fri, 28 Oct 2016 10:38:45 -0700
>> Subject: [Patch] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib
>> library
>>
>> 1) Remove SmmGetProcessorLocation() from PiSmmCpuDxeSmm driver.
>> 2) Remove ExtractProcessorLocation() from MpInitLib library.
>> 3) Add GetProcessorLocation() to BaseXApicLib and BaseXApicX2ApicLib.
>>
>> Cc: Jeff Fan <jeff.fan@intel.com>
>> Cc: Laszlo Ersek <lersek@redhat.com>
>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>> Contributed-under: TianoCore Contribution Agreement 1.0
>> Signed-off-by: Leo Duran <leo.duran@amd.com>
>> ---
>> UefiCpuPkg/Include/Library/LocalApicLib.h | 21 +++
>> UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c | 148
>> +++++++++++++++++++++
>> .../BaseXApicX2ApicLib/BaseXApicX2ApicLib.c | 148
>> +++++++++++++++++++++
>> UefiCpuPkg/Library/MpInitLib/MpLib.c | 133 +-----------------
>> UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c | 126 +-----------------
>> 5 files changed, 329 insertions(+), 247 deletions(-)
>>
>> diff --git a/UefiCpuPkg/Include/Library/LocalApicLib.h
>> b/UefiCpuPkg/Include/Library/LocalApicLib.h
>> index cd4e613..d73198f 100644
>> --- a/UefiCpuPkg/Include/Library/LocalApicLib.h
>> +++ b/UefiCpuPkg/Include/Library/LocalApicLib.h
>> @@ -410,6 +410,27 @@ GetApicMsiValue (
>> IN BOOLEAN LevelTriggered,
>> IN BOOLEAN AssertionLevel
>> );
>> +
>> +/**
>> + Get Package ID/Core ID/Thread ID of a processor.
>> +
>> + The algorithm assumes the target system has symmetry across physical
>> + package boundaries with respect to the number of logical processors
>> + per package, number of cores per package.
>> +
>> + @param[in] InitialApicId Must be the initial APIC ID of the target logical
>> + processor.
>> + @param[out] Package Returns the processor package ID.
>> + @param[out] Core Returns the processor core ID.
>> + @param[out] Thread Returns the processor thread ID.
>> +**/
>> +VOID
>> +GetProcessorLocation(
>> + IN UINT32 InitialApicId,
>> + OUT UINT32 *Package OPTIONAL,
>> + OUT UINT32 *Core OPTIONAL,
>> + OUT UINT32 *Thread OPTIONAL
>> + );
>>
>> #endif
>>
>> diff --git a/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>> b/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>> index 8d0fb02..7ddee1b 100644
>> --- a/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>> +++ b/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>> @@ -941,3 +941,151 @@ GetApicMsiValue (
>> }
>> return MsiData.Uint64;
>> }
>> +
>> +/**
>> + Get Package ID/Core ID/Thread ID of a processor.
>> +
>> + The algorithm assumes the target system has symmetry across physical
>> + package boundaries with respect to the number of logical processors
>> + per package, number of cores per package.
>> +
>> + @param[in] InitialApicId Must be the initial APIC ID of the target logical
>> + processor.
>> + @param[out] Package Returns the processor package ID.
>> + @param[out] Core Returns the processor core ID.
>> + @param[out] Thread Returns the processor thread ID.
>> +**/
>> +VOID
>> +GetProcessorLocation(
>> + IN UINT32 InitialApicId,
>> + OUT UINT32 *Package OPTIONAL,
>> + OUT UINT32 *Core OPTIONAL,
>> + OUT UINT32 *Thread OPTIONAL
>> + )
>> +{
>> + BOOLEAN TopologyLeafSupported;
>> + UINTN ThreadBits;
>> + UINTN CoreBits;
>> + CPUID_VERSION_INFO_EBX VersionInfoEbx;
>> + CPUID_VERSION_INFO_EDX VersionInfoEdx;
>> + CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>> + CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>> + CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>> + CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>> + UINT32 MaxCpuIdIndex;
>> + UINT32 SubIndex;
>> + UINTN LevelType;
>> + UINT32 MaxLogicProcessorsPerPackage;
>> + UINT32 MaxCoresPerPackage;
>> +
>> + //
>> + // Check if the processor is capable of supporting more than one logical
>> processor.
>> + //
>> + AsmCpuid(CPUID_VERSION_INFO, NULL, NULL, NULL,
>> + &VersionInfoEdx.Uint32); if (VersionInfoEdx.Bits.HTT == 0) {
>> + if (Thread != NULL) {
>> + *Thread = 0;
>> + }
>> + if (Core != NULL) {
>> + *Core = 0;
>> + }
>> + if (Package != NULL) {
>> + *Package = 0;
>> + }
>> + return;
>> + }
>> +
>> + ThreadBits = 0;
>> + CoreBits = 0;
>> +
>> + //
>> + // Assume three-level mapping of APIC ID: Package:Core:SMT.
>> + //
>> +
>> + TopologyLeafSupported = FALSE;
>> + //
>> + // Get the max index of basic CPUID
>> + //
>> + AsmCpuid(CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>> +
>> + //
>> + // If the extended topology enumeration leaf is available, it // is
>> + the preferred mechanism for enumerating topology.
>> + //
>> + if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>> + AsmCpuidEx(
>> + CPUID_EXTENDED_TOPOLOGY,
>> + 0,
>> + &ExtendedTopologyEax.Uint32,
>> + &ExtendedTopologyEbx.Uint32,
>> + &ExtendedTopologyEcx.Uint32,
>> + NULL
>> + );
>> + //
>> + // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>> + // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is not
>> + // supported on that processor.
>> + //
>> + if (ExtendedTopologyEbx.Uint32 != 0) {
>> + TopologyLeafSupported = TRUE;
>> +
>> + //
>> + // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters
>> to extract
>> + // the SMT sub-field of x2APIC ID.
>> + //
>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> + ASSERT(LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>> + ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>> +
>> + //
>> + // Software must not assume any "level type" encoding
>> + // value to be related to any sub-leaf index, except sub-leaf 0.
>> + //
>> + SubIndex = 1;
>> + do {
>> + AsmCpuidEx(
>> + CPUID_EXTENDED_TOPOLOGY,
>> + SubIndex,
>> + &ExtendedTopologyEax.Uint32,
>> + NULL,
>> + &ExtendedTopologyEcx.Uint32,
>> + NULL
>> + );
>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> + if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>> + CoreBits = ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>> + break;
>> + }
>> + SubIndex++;
>> + } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>> + }
>> + }
>> +
>> + if (!TopologyLeafSupported) {
>> + AsmCpuid(CPUID_VERSION_INFO, NULL, &VersionInfoEbx.Uint32, NULL,
>> NULL);
>> + MaxLogicProcessorsPerPackage =
>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>> + if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>> + AsmCpuidEx(CPUID_CACHE_PARAMS, 0, &CacheParamsEax.Uint32,
>> NULL, NULL, NULL);
>> + MaxCoresPerPackage =
>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>> + }
>> + else {
>> + //
>> + // Must be a single-core processor.
>> + //
>> + MaxCoresPerPackage = 1;
>> + }
>> +
>> + ThreadBits = (UINTN)(HighBitSet32(MaxLogicProcessorsPerPackage /
>> MaxCoresPerPackage - 1) + 1);
>> + CoreBits = (UINTN)(HighBitSet32(MaxCoresPerPackage - 1) + 1); }
>> +
>> + if (Thread != NULL) {
>> + *Thread = InitialApicId & ((1 << ThreadBits) - 1);
>> + }
>> + if (Core != NULL) {
>> + *Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>> + }
>> + if (Package != NULL) {
>> + *Package = (InitialApicId >> (ThreadBits + CoreBits));
>> + }
>> +}
>> diff --git a/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>> b/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>> index 4c42696..c620211 100644
>> --- a/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>> +++ b/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>> @@ -1036,3 +1036,151 @@ GetApicMsiValue (
>> }
>> return MsiData.Uint64;
>> }
>> +
>> +/**
>> + Get Package ID/Core ID/Thread ID of a processor.
>> +
>> + The algorithm assumes the target system has symmetry across physical
>> + package boundaries with respect to the number of logical processors
>> + per package, number of cores per package.
>> +
>> + @param[in] InitialApicId Must be the initial APIC ID of the target logical
>> + processor.
>> + @param[out] Package Returns the processor package ID.
>> + @param[out] Core Returns the processor core ID.
>> + @param[out] Thread Returns the processor thread ID.
>> +**/
>> +VOID
>> +GetProcessorLocation(
>> + IN UINT32 InitialApicId,
>> + OUT UINT32 *Package OPTIONAL,
>> + OUT UINT32 *Core OPTIONAL,
>> + OUT UINT32 *Thread OPTIONAL
>> + )
>> +{
>> + BOOLEAN TopologyLeafSupported;
>> + UINTN ThreadBits;
>> + UINTN CoreBits;
>> + CPUID_VERSION_INFO_EBX VersionInfoEbx;
>> + CPUID_VERSION_INFO_EDX VersionInfoEdx;
>> + CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>> + CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>> + CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>> + CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>> + UINT32 MaxCpuIdIndex;
>> + UINT32 SubIndex;
>> + UINTN LevelType;
>> + UINT32 MaxLogicProcessorsPerPackage;
>> + UINT32 MaxCoresPerPackage;
>> +
>> + //
>> + // Check if the processor is capable of supporting more than one logical
>> processor.
>> + //
>> + AsmCpuid(CPUID_VERSION_INFO, NULL, NULL, NULL,
>> + &VersionInfoEdx.Uint32); if (VersionInfoEdx.Bits.HTT == 0) {
>> + if (Thread != NULL) {
>> + *Thread = 0;
>> + }
>> + if (Core != NULL) {
>> + *Core = 0;
>> + }
>> + if (Package != NULL) {
>> + *Package = 0;
>> + }
>> + return;
>> + }
>> +
>> + ThreadBits = 0;
>> + CoreBits = 0;
>> +
>> + //
>> + // Assume three-level mapping of APIC ID: Package:Core:SMT.
>> + //
>> +
>> + TopologyLeafSupported = FALSE;
>> + //
>> + // Get the max index of basic CPUID
>> + //
>> + AsmCpuid(CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>> +
>> + //
>> + // If the extended topology enumeration leaf is available, it // is
>> + the preferred mechanism for enumerating topology.
>> + //
>> + if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>> + AsmCpuidEx(
>> + CPUID_EXTENDED_TOPOLOGY,
>> + 0,
>> + &ExtendedTopologyEax.Uint32,
>> + &ExtendedTopologyEbx.Uint32,
>> + &ExtendedTopologyEcx.Uint32,
>> + NULL
>> + );
>> + //
>> + // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>> + // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is not
>> + // supported on that processor.
>> + //
>> + if (ExtendedTopologyEbx.Uint32 != 0) {
>> + TopologyLeafSupported = TRUE;
>> +
>> + //
>> + // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters
>> to extract
>> + // the SMT sub-field of x2APIC ID.
>> + //
>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> + ASSERT(LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>> + ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>> +
>> + //
>> + // Software must not assume any "level type" encoding
>> + // value to be related to any sub-leaf index, except sub-leaf 0.
>> + //
>> + SubIndex = 1;
>> + do {
>> + AsmCpuidEx(
>> + CPUID_EXTENDED_TOPOLOGY,
>> + SubIndex,
>> + &ExtendedTopologyEax.Uint32,
>> + NULL,
>> + &ExtendedTopologyEcx.Uint32,
>> + NULL
>> + );
>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> + if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>> + CoreBits = ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>> + break;
>> + }
>> + SubIndex++;
>> + } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>> + }
>> + }
>> +
>> + if (!TopologyLeafSupported) {
>> + AsmCpuid(CPUID_VERSION_INFO, NULL, &VersionInfoEbx.Uint32, NULL,
>> NULL);
>> + MaxLogicProcessorsPerPackage =
>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>> + if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>> + AsmCpuidEx(CPUID_CACHE_PARAMS, 0, &CacheParamsEax.Uint32,
>> NULL, NULL, NULL);
>> + MaxCoresPerPackage =
>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>> + }
>> + else {
>> + //
>> + // Must be a single-core processor.
>> + //
>> + MaxCoresPerPackage = 1;
>> + }
>> +
>> + ThreadBits = (UINTN)(HighBitSet32(MaxLogicProcessorsPerPackage /
>> MaxCoresPerPackage - 1) + 1);
>> + CoreBits = (UINTN)(HighBitSet32(MaxCoresPerPackage - 1) + 1); }
>> +
>> + if (Thread != NULL) {
>> + *Thread = InitialApicId & ((1 << ThreadBits) - 1);
>> + }
>> + if (Core != NULL) {
>> + *Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>> + }
>> + if (Package != NULL) {
>> + *Package = (InitialApicId >> (ThreadBits + CoreBits));
>> + }
>> +}
>> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
>> b/UefiCpuPkg/Library/MpInitLib/MpLib.c
>> index c3fe721..f205b6b 100644
>> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
>> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
>> @@ -58,132 +58,6 @@ IsBspExecuteDisableEnabled ( }
>>
>> /**
>> - Get CPU Package/Core/Thread location information.
>> -
>> - @param[in] InitialApicId CPU APIC ID
>> - @param[out] Location Pointer to CPU location information
>> -**/
>> -VOID
>> -ExtractProcessorLocation (
>> - IN UINT32 InitialApicId,
>> - OUT EFI_CPU_PHYSICAL_LOCATION *Location
>> - )
>> -{
>> - BOOLEAN TopologyLeafSupported;
>> - UINTN ThreadBits;
>> - UINTN CoreBits;
>> - CPUID_VERSION_INFO_EBX VersionInfoEbx;
>> - CPUID_VERSION_INFO_EDX VersionInfoEdx;
>> - CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>> - CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>> - CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>> - CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>> - UINT32 MaxCpuIdIndex;
>> - UINT32 SubIndex;
>> - UINTN LevelType;
>> - UINT32 MaxLogicProcessorsPerPackage;
>> - UINT32 MaxCoresPerPackage;
>> -
>> - //
>> - // Check if the processor is capable of supporting more than one logical
>> processor.
>> - //
>> - AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL,
>> &VersionInfoEdx.Uint32);
>> - if (VersionInfoEdx.Bits.HTT == 0) {
>> - Location->Thread = 0;
>> - Location->Core = 0;
>> - Location->Package = 0;
>> - return;
>> - }
>> -
>> - ThreadBits = 0;
>> - CoreBits = 0;
>> -
>> - //
>> - // Assume three-level mapping of APIC ID: Package:Core:SMT.
>> - //
>> -
>> - TopologyLeafSupported = FALSE;
>> - //
>> - // Get the max index of basic CPUID
>> - //
>> - AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>> -
>> - //
>> - // If the extended topology enumeration leaf is available, it
>> - // is the preferred mechanism for enumerating topology.
>> - //
>> - if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>> - AsmCpuidEx (
>> - CPUID_EXTENDED_TOPOLOGY,
>> - 0,
>> - &ExtendedTopologyEax.Uint32,
>> - &ExtendedTopologyEbx.Uint32,
>> - &ExtendedTopologyEcx.Uint32,
>> - NULL
>> - );
>> - //
>> - // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>> - // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is not
>> - // supported on that processor.
>> - //
>> - if (ExtendedTopologyEbx.Uint32 != 0) {
>> - TopologyLeafSupported = TRUE;
>> -
>> - //
>> - // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters to
>> extract
>> - // the SMT sub-field of x2APIC ID.
>> - //
>> - LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> - ASSERT (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>> - ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>> -
>> - //
>> - // Software must not assume any "level type" encoding
>> - // value to be related to any sub-leaf index, except sub-leaf 0.
>> - //
>> - SubIndex = 1;
>> - do {
>> - AsmCpuidEx (
>> - CPUID_EXTENDED_TOPOLOGY,
>> - SubIndex,
>> - &ExtendedTopologyEax.Uint32,
>> - NULL,
>> - &ExtendedTopologyEcx.Uint32,
>> - NULL
>> - );
>> - LevelType = ExtendedTopologyEcx.Bits.LevelType;
>> - if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>> - CoreBits = ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>> - break;
>> - }
>> - SubIndex++;
>> - } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>> - }
>> - }
>> -
>> - if (!TopologyLeafSupported) {
>> - AsmCpuid (CPUID_VERSION_INFO, NULL, &VersionInfoEbx.Uint32, NULL,
>> NULL);
>> - MaxLogicProcessorsPerPackage =
>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>> - if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>> - AsmCpuidEx (CPUID_CACHE_PARAMS, 0, &CacheParamsEax.Uint32,
>> NULL, NULL, NULL);
>> - MaxCoresPerPackage =
>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>> - } else {
>> - //
>> - // Must be a single-core processor.
>> - //
>> - MaxCoresPerPackage = 1;
>> - }
>> -
>> - ThreadBits = (UINTN) (HighBitSet32 (MaxLogicProcessorsPerPackage /
>> MaxCoresPerPackage - 1) + 1);
>> - CoreBits = (UINTN) (HighBitSet32 (MaxCoresPerPackage - 1) + 1);
>> - }
>> -
>> - Location->Thread = InitialApicId & ((1 << ThreadBits) - 1);
>> - Location->Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>> - Location->Package = (InitialApicId >> (ThreadBits + CoreBits)); -}
>> -
>> -/**
>> Worker function for SwitchBSP().
>>
>> Worker function for SwitchBSP(), assigned to the AP which is intended @@
>> -1451,7 +1325,12 @@ MpInitLibGetProcessorInfo (
>> //
>> // Get processor location information
>> //
>> - ExtractProcessorLocation (CpuMpData-
>>> CpuData[ProcessorNumber].ApicId, &ProcessorInfoBuffer->Location);
>> + GetProcessorLocation (
>> + CpuMpData->CpuData[ProcessorNumber].ApicId,
>> + &ProcessorInfoBuffer->Location.Package,
>> + &ProcessorInfoBuffer->Location.Core,
>> + &ProcessorInfoBuffer->Location.Thread
>> + );
>>
>> if (HealthData != NULL) {
>> HealthData->Uint32 = CpuMpData->CpuData[ProcessorNumber].Health;
>> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>> b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>> index 40f2a17..93ebb9e 100644
>> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>> @@ -27,125 +27,6 @@ EFI_SMM_CPU_SERVICE_PROTOCOL
>> mSmmCpuService = { };
>>
>> /**
>> - Get Package ID/Core ID/Thread ID of a processor.
>> -
>> - APIC ID must be an initial APIC ID.
>> -
>> - The algorithm below assumes the target system has symmetry across
>> physical package boundaries
>> - with respect to the number of logical processors per package, number of
>> cores per package.
>> -
>> - @param ApicId APIC ID of the target logical processor.
>> - @param Location Returns the processor location information.
>> -**/
>> -VOID
>> -SmmGetProcessorLocation (
>> - IN UINT32 ApicId,
>> - OUT EFI_CPU_PHYSICAL_LOCATION *Location
>> - )
>> -{
>> - UINTN ThreadBits;
>> - UINTN CoreBits;
>> - UINT32 RegEax;
>> - UINT32 RegEbx;
>> - UINT32 RegEcx;
>> - UINT32 RegEdx;
>> - UINT32 MaxCpuIdIndex;
>> - UINT32 SubIndex;
>> - UINTN LevelType;
>> - UINT32 MaxLogicProcessorsPerPackage;
>> - UINT32 MaxCoresPerPackage;
>> - BOOLEAN TopologyLeafSupported;
>> -
>> - ASSERT (Location != NULL);
>> -
>> - ThreadBits = 0;
>> - CoreBits = 0;
>> - TopologyLeafSupported = FALSE;
>> -
>> - //
>> - // Check if the processor is capable of supporting more than one logical
>> processor.
>> - //
>> - AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx);
>> - ASSERT ((RegEdx & BIT28) != 0);
>> -
>> - //
>> - // Assume three-level mapping of APIC ID: Package:Core:SMT.
>> - //
>> -
>> - //
>> - // Get the max index of basic CPUID
>> - //
>> - AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>> -
>> - //
>> - // If the extended topology enumeration leaf is available, it
>> - // is the preferred mechanism for enumerating topology.
>> - //
>> - if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>> - AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, 0, &RegEax, &RegEbx,
>> &RegEcx, NULL);
>> - //
>> - // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>> - // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is not
>> - // supported on that processor.
>> - //
>> - if ((RegEbx & 0xffff) != 0) {
>> - TopologyLeafSupported = TRUE;
>> -
>> - //
>> - // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters to
>> extract
>> - // the SMT sub-field of x2APIC ID.
>> - //
>> - LevelType = (RegEcx >> 8) & 0xff;
>> - ASSERT (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>> - if ((RegEbx & 0xffff) > 1 ) {
>> - ThreadBits = RegEax & 0x1f;
>> - } else {
>> - //
>> - // HT is not supported
>> - //
>> - ThreadBits = 0;
>> - }
>> -
>> - //
>> - // Software must not assume any "level type" encoding
>> - // value to be related to any sub-leaf index, except sub-leaf 0.
>> - //
>> - SubIndex = 1;
>> - do {
>> - AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, SubIndex, &RegEax, NULL,
>> &RegEcx, NULL);
>> - LevelType = (RegEcx >> 8) & 0xff;
>> - if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>> - CoreBits = (RegEax & 0x1f) - ThreadBits;
>> - break;
>> - }
>> - SubIndex++;
>> - } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>> - }
>> - }
>> -
>> - if (!TopologyLeafSupported) {
>> - AsmCpuid (CPUID_VERSION_INFO, NULL, &RegEbx, NULL, NULL);
>> - MaxLogicProcessorsPerPackage = (RegEbx >> 16) & 0xff;
>> - if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>> - AsmCpuidEx (CPUID_CACHE_PARAMS, 0, &RegEax, NULL, NULL, NULL);
>> - MaxCoresPerPackage = (RegEax >> 26) + 1;
>> - } else {
>> - //
>> - // Must be a single-core processor.
>> - //
>> - MaxCoresPerPackage = 1;
>> - }
>> -
>> - ThreadBits = (UINTN) (HighBitSet32 (MaxLogicProcessorsPerPackage /
>> MaxCoresPerPackage - 1) + 1);
>> - CoreBits = (UINTN) (HighBitSet32 (MaxCoresPerPackage - 1) + 1);
>> - }
>> -
>> - Location->Thread = ApicId & ~((-1) << ThreadBits);
>> - Location->Core = (ApicId >> ThreadBits) & ~((-1) << CoreBits);
>> - Location->Package = (ApicId >> (ThreadBits+ CoreBits)); -}
>> -
>> -/**
>> Gets processor information on the requested processor at the instant this
>> call is made.
>>
>> @param[in] This A pointer to the
>> EFI_SMM_CPU_SERVICE_PROTOCOL instance.
>> @@ -280,7 +161,12 @@ SmmAddProcessor (
>> gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId ==
>> INVALID_APIC_ID) {
>> gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId = ProcessorId;
>> gSmmCpuPrivate->ProcessorInfo[Index].StatusFlag = 0;
>> - SmmGetProcessorLocation ((UINT32)ProcessorId, &gSmmCpuPrivate-
>>> ProcessorInfo[Index].Location);
>> + GetProcessorLocation (
>> + (UINT32)ProcessorId,
>> + &gSmmCpuPrivate->ProcessorInfo[Index].Location.Package,
>> + &gSmmCpuPrivate->ProcessorInfo[Index].Location.Core,
>> + &gSmmCpuPrivate->ProcessorInfo[Index].Location.Thread
>> + );
>>
>> *ProcessorNumber = Index;
>> gSmmCpuPrivate->Operation[Index] = SmmCpuAdd;
>> --
>> 2.6.3.windows.1
>>
>>
>> Best regards,
>>
>> Mike
>>
>>> -----Original Message-----
>>> From: Leo Duran [mailto:leo.duran@amd.com]
>>> Sent: Friday, October 28, 2016 10:39 AM
>>> To: edk2-devel@lists.01.org
>>> Cc: Gao, Liming <liming.gao@intel.com>; lersek@redhat.com; Fan, Jeff
>>> <jeff.fan@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>;
>> Leo Duran
>>> <leo.duran@amd.com>
>>> Subject: [v3] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib
>> library
>>>
>>> 1) Remove SmmGetProcessorLocation() from PiSmmCpuDxeSmm driver.
>>> 2) Remove ExtractProcessorLocation() from MpInitLib library.
>>> 3) Add GetProcessorLocation() to BaseXApicLib and BaseXApicX2ApicLib.
>>>
>>> Contributed-under: TianoCore Contribution Agreement 1.0
>>> Signed-off-by: Leo Duran <leo.duran@amd.com>
>>> ---
>>> UefiCpuPkg/Include/Library/LocalApicLib.h | 18 +++
>>> UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c | 130
>> +++++++++++++++++++++
>>> .../BaseXApicX2ApicLib/BaseXApicX2ApicLib.c | 130
>> +++++++++++++++++++++
>>> UefiCpuPkg/Library/MpInitLib/MpLib.c | 128 +-------------------
>>> UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c | 121 +------------------
>>> 5 files changed, 280 insertions(+), 247 deletions(-)
>>>
>>> diff --git a/UefiCpuPkg/Include/Library/LocalApicLib.h
>>> b/UefiCpuPkg/Include/Library/LocalApicLib.h
>>> index cd4e613..4abf64c 100644
>>> --- a/UefiCpuPkg/Include/Library/LocalApicLib.h
>>> +++ b/UefiCpuPkg/Include/Library/LocalApicLib.h
>>> @@ -21,6 +21,9 @@
>>> #define LOCAL_APIC_MODE_XAPIC 0x1 ///< xAPIC mode.
>>> #define LOCAL_APIC_MODE_X2APIC 0x2 ///< x2APIC mode.
>>>
>>> +#include <PiPei.h>
>>> +#include <Protocol/MpService.h>
>>> +
>>> /**
>>> Retrieve the base address of local APIC.
>>>
>>> @@ -410,6 +413,21 @@ GetApicMsiValue (
>>> IN BOOLEAN LevelTriggered,
>>> IN BOOLEAN AssertionLevel
>>> );
>>> +
>>> +/**
>>> +Get Package ID/Core ID/Thread ID of a processor.
>>> +
>>> +The algorithm assumes the target system has symmetry across physical
>> package
>>> boundaries
>>> +with respect to the number of logical processors per package, number of
>> cores per
>>> package.
>>> +
>>> +@param InitialApicId Must be the initial APIC ID of the target logical
>> processor.
>>> +@param Location Returns the processor location information.
>>> +**/
>>> +VOID
>>> +GetProcessorLocation(
>>> + IN UINT32 InitialApicId,
>>> + OUT EFI_CPU_PHYSICAL_LOCATION *Location
>>> +);
>>>
>>> #endif
>>>
>>> diff --git a/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>>> b/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>>> index 8d0fb02..219f99f 100644
>>> --- a/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>>> +++ b/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c
>>> @@ -941,3 +941,133 @@ GetApicMsiValue (
>>> }
>>> return MsiData.Uint64;
>>> }
>>> +
>>> +/**
>>> +Get Package ID/Core ID/Thread ID of a processor.
>>> +
>>> +The algorithm assumes the target system has symmetry across physical
>> package
>>> boundaries
>>> +with respect to the number of logical processors per package, number of
>> cores per
>>> package.
>>> +
>>> +@param InitialApicId Must be the initial APIC ID of the target logical
>> processor.
>>> +@param Location Returns the processor location information.
>>> +**/
>>> +VOID
>>> +GetProcessorLocation(
>>> +IN UINT32 InitialApicId,
>>> +OUT EFI_CPU_PHYSICAL_LOCATION *Location
>>> +)
>>> +{
>>> + BOOLEAN TopologyLeafSupported;
>>> + UINTN ThreadBits;
>>> + UINTN CoreBits;
>>> + CPUID_VERSION_INFO_EBX VersionInfoEbx;
>>> + CPUID_VERSION_INFO_EDX VersionInfoEdx;
>>> + CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>>> + CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>>> + CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>>> + CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>>> + UINT32 MaxCpuIdIndex;
>>> + UINT32 SubIndex;
>>> + UINTN LevelType;
>>> + UINT32 MaxLogicProcessorsPerPackage;
>>> + UINT32 MaxCoresPerPackage;
>>> +
>>> + //
>>> + // Check if the processor is capable of supporting more than one
>> logical
>>> processor.
>>> + //
>>> + AsmCpuid(CPUID_VERSION_INFO, NULL, NULL, NULL,
>> &VersionInfoEdx.Uint32);
>>> + if (VersionInfoEdx.Bits.HTT == 0) {
>>> + Location->Thread = 0;
>>> + Location->Core = 0;
>>> + Location->Package = 0;
>>> + return;
>>> + }
>>> +
>>> + ThreadBits = 0;
>>> + CoreBits = 0;
>>> +
>>> + //
>>> + // Assume three-level mapping of APIC ID: Package:Core:SMT.
>>> + //
>>> +
>>> + TopologyLeafSupported = FALSE;
>>> + //
>>> + // Get the max index of basic CPUID
>>> + //
>>> + AsmCpuid(CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL,
>> NULL);
>>> +
>>> + //
>>> + // If the extended topology enumeration leaf is available, it
>>> + // is the preferred mechanism for enumerating topology.
>>> + //
>>> + if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>>> + AsmCpuidEx(
>>> + CPUID_EXTENDED_TOPOLOGY,
>>> + 0,
>>> + &ExtendedTopologyEax.Uint32,
>>> + &ExtendedTopologyEbx.Uint32,
>>> + &ExtendedTopologyEcx.Uint32,
>>> + NULL
>>> + );
>>> + //
>>> + // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and
>> maximum input value for
>>> + // basic CPUID information is greater than 0BH, then
>> CPUID.0BH leaf is not
>>> + // supported on that processor.
>>> + //
>>> + if (ExtendedTopologyEbx.Uint32 != 0) {
>>> + TopologyLeafSupported = TRUE;
>>> +
>>> + //
>>> + // Sub-leaf index 0 (ECX= 0 as input) provides
>> enumeration parameters to
>>> extract
>>> + // the SMT sub-field of x2APIC ID.
>>> + //
>>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>>> + ASSERT(LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>>> + ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>>> +
>>> + //
>>> + // Software must not assume any "level type"
>> encoding
>>> + // value to be related to any sub-leaf index, except
>> sub-leaf 0.
>>> + //
>>> + SubIndex = 1;
>>> + do {
>>> + AsmCpuidEx(
>>> + CPUID_EXTENDED_TOPOLOGY,
>>> + SubIndex,
>>> + &ExtendedTopologyEax.Uint32,
>>> + NULL,
>>> + &ExtendedTopologyEcx.Uint32,
>>> + NULL
>>> + );
>>> + LevelType =
>> ExtendedTopologyEcx.Bits.LevelType;
>>> + if (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>>> + CoreBits =
>> ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>>> + break;
>>> + }
>>> + SubIndex++;
>>> + } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>>> + }
>>> + }
>>> +
>>> + if (!TopologyLeafSupported) {
>>> + AsmCpuid(CPUID_VERSION_INFO, NULL,
>> &VersionInfoEbx.Uint32, NULL, NULL);
>>> + MaxLogicProcessorsPerPackage =
>>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>>> + if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>>> + AsmCpuidEx(CPUID_CACHE_PARAMS, 0,
>> &CacheParamsEax.Uint32, NULL, NULL,
>>> NULL);
>>> + MaxCoresPerPackage =
>>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>>> + }
>>> + else {
>>> + //
>>> + // Must be a single-core processor.
>>> + //
>>> + MaxCoresPerPackage = 1;
>>> + }
>>> +
>>> + ThreadBits =
>> (UINTN)(HighBitSet32(MaxLogicProcessorsPerPackage /
>>> MaxCoresPerPackage - 1) + 1);
>>> + CoreBits = (UINTN)(HighBitSet32(MaxCoresPerPackage - 1) +
>> 1);
>>> + }
>>> +
>>> + Location->Thread = InitialApicId & ((1 << ThreadBits) - 1);
>>> + Location->Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>>> + Location->Package = (InitialApicId >> (ThreadBits + CoreBits));
>>> +}
>>> diff --git a/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>>> b/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>>> index 4c42696..16395a3 100644
>>> --- a/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>>> +++ b/UefiCpuPkg/Library/BaseXApicX2ApicLib/BaseXApicX2ApicLib.c
>>> @@ -1036,3 +1036,133 @@ GetApicMsiValue (
>>> }
>>> return MsiData.Uint64;
>>> }
>>> +
>>> +/**
>>> +Get Package ID/Core ID/Thread ID of a processor.
>>> +
>>> +The algorithm assumes the target system has symmetry across physical
>> package
>>> boundaries
>>> +with respect to the number of logical processors per package, number of
>> cores per
>>> package.
>>> +
>>> +@param InitialApicId Must be the initial APIC ID of the target logical
>> processor.
>>> +@param Location Returns the processor location information.
>>> +**/
>>> +VOID
>>> +GetProcessorLocation(
>>> +IN UINT32 InitialApicId,
>>> +OUT EFI_CPU_PHYSICAL_LOCATION *Location
>>> +)
>>> +{
>>> + BOOLEAN TopologyLeafSupported;
>>> + UINTN ThreadBits;
>>> + UINTN CoreBits;
>>> + CPUID_VERSION_INFO_EBX VersionInfoEbx;
>>> + CPUID_VERSION_INFO_EDX VersionInfoEdx;
>>> + CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>>> + CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>>> + CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>>> + CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>>> + UINT32 MaxCpuIdIndex;
>>> + UINT32 SubIndex;
>>> + UINTN LevelType;
>>> + UINT32 MaxLogicProcessorsPerPackage;
>>> + UINT32 MaxCoresPerPackage;
>>> +
>>> + //
>>> + // Check if the processor is capable of supporting more than one
>> logical
>>> processor.
>>> + //
>>> + AsmCpuid(CPUID_VERSION_INFO, NULL, NULL, NULL,
>> &VersionInfoEdx.Uint32);
>>> + if (VersionInfoEdx.Bits.HTT == 0) {
>>> + Location->Thread = 0;
>>> + Location->Core = 0;
>>> + Location->Package = 0;
>>> + return;
>>> + }
>>> +
>>> + ThreadBits = 0;
>>> + CoreBits = 0;
>>> +
>>> + //
>>> + // Assume three-level mapping of APIC ID: Package:Core:SMT.
>>> + //
>>> +
>>> + TopologyLeafSupported = FALSE;
>>> + //
>>> + // Get the max index of basic CPUID
>>> + //
>>> + AsmCpuid(CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL,
>> NULL);
>>> +
>>> + //
>>> + // If the extended topology enumeration leaf is available, it
>>> + // is the preferred mechanism for enumerating topology.
>>> + //
>>> + if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>>> + AsmCpuidEx(
>>> + CPUID_EXTENDED_TOPOLOGY,
>>> + 0,
>>> + &ExtendedTopologyEax.Uint32,
>>> + &ExtendedTopologyEbx.Uint32,
>>> + &ExtendedTopologyEcx.Uint32,
>>> + NULL
>>> + );
>>> + //
>>> + // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and
>> maximum input value for
>>> + // basic CPUID information is greater than 0BH, then
>> CPUID.0BH leaf is not
>>> + // supported on that processor.
>>> + //
>>> + if (ExtendedTopologyEbx.Uint32 != 0) {
>>> + TopologyLeafSupported = TRUE;
>>> +
>>> + //
>>> + // Sub-leaf index 0 (ECX= 0 as input) provides
>> enumeration parameters to
>>> extract
>>> + // the SMT sub-field of x2APIC ID.
>>> + //
>>> + LevelType = ExtendedTopologyEcx.Bits.LevelType;
>>> + ASSERT(LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>>> + ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>>> +
>>> + //
>>> + // Software must not assume any "level type"
>> encoding
>>> + // value to be related to any sub-leaf index, except
>> sub-leaf 0.
>>> + //
>>> + SubIndex = 1;
>>> + do {
>>> + AsmCpuidEx(
>>> + CPUID_EXTENDED_TOPOLOGY,
>>> + SubIndex,
>>> + &ExtendedTopologyEax.Uint32,
>>> + NULL,
>>> + &ExtendedTopologyEcx.Uint32,
>>> + NULL
>>> + );
>>> + LevelType =
>> ExtendedTopologyEcx.Bits.LevelType;
>>> + if (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>>> + CoreBits =
>> ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>>> + break;
>>> + }
>>> + SubIndex++;
>>> + } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>>> + }
>>> + }
>>> +
>>> + if (!TopologyLeafSupported) {
>>> + AsmCpuid(CPUID_VERSION_INFO, NULL,
>> &VersionInfoEbx.Uint32, NULL, NULL);
>>> + MaxLogicProcessorsPerPackage =
>>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>>> + if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>>> + AsmCpuidEx(CPUID_CACHE_PARAMS, 0,
>> &CacheParamsEax.Uint32, NULL, NULL,
>>> NULL);
>>> + MaxCoresPerPackage =
>>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>>> + }
>>> + else {
>>> + //
>>> + // Must be a single-core processor.
>>> + //
>>> + MaxCoresPerPackage = 1;
>>> + }
>>> +
>>> + ThreadBits =
>> (UINTN)(HighBitSet32(MaxLogicProcessorsPerPackage /
>>> MaxCoresPerPackage - 1) + 1);
>>> + CoreBits = (UINTN)(HighBitSet32(MaxCoresPerPackage - 1) +
>> 1);
>>> + }
>>> +
>>> + Location->Thread = InitialApicId & ((1 << ThreadBits) - 1);
>>> + Location->Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>>> + Location->Package = (InitialApicId >> (ThreadBits + CoreBits));
>>> +}
>>> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
>>> b/UefiCpuPkg/Library/MpInitLib/MpLib.c
>>> index c3fe721..f3380bb 100644
>>> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
>>> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
>>> @@ -58,132 +58,6 @@ IsBspExecuteDisableEnabled (
>>> }
>>>
>>> /**
>>> - Get CPU Package/Core/Thread location information.
>>> -
>>> - @param[in] InitialApicId CPU APIC ID
>>> - @param[out] Location Pointer to CPU location information
>>> -**/
>>> -VOID
>>> -ExtractProcessorLocation (
>>> - IN UINT32 InitialApicId,
>>> - OUT EFI_CPU_PHYSICAL_LOCATION *Location
>>> - )
>>> -{
>>> - BOOLEAN TopologyLeafSupported;
>>> - UINTN ThreadBits;
>>> - UINTN CoreBits;
>>> - CPUID_VERSION_INFO_EBX VersionInfoEbx;
>>> - CPUID_VERSION_INFO_EDX VersionInfoEdx;
>>> - CPUID_CACHE_PARAMS_EAX CacheParamsEax;
>>> - CPUID_EXTENDED_TOPOLOGY_EAX ExtendedTopologyEax;
>>> - CPUID_EXTENDED_TOPOLOGY_EBX ExtendedTopologyEbx;
>>> - CPUID_EXTENDED_TOPOLOGY_ECX ExtendedTopologyEcx;
>>> - UINT32 MaxCpuIdIndex;
>>> - UINT32 SubIndex;
>>> - UINTN LevelType;
>>> - UINT32 MaxLogicProcessorsPerPackage;
>>> - UINT32 MaxCoresPerPackage;
>>> -
>>> - //
>>> - // Check if the processor is capable of supporting more than one logical
>> processor.
>>> - //
>>> - AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL,
>> &VersionInfoEdx.Uint32);
>>> - if (VersionInfoEdx.Bits.HTT == 0) {
>>> - Location->Thread = 0;
>>> - Location->Core = 0;
>>> - Location->Package = 0;
>>> - return;
>>> - }
>>> -
>>> - ThreadBits = 0;
>>> - CoreBits = 0;
>>> -
>>> - //
>>> - // Assume three-level mapping of APIC ID: Package:Core:SMT.
>>> - //
>>> -
>>> - TopologyLeafSupported = FALSE;
>>> - //
>>> - // Get the max index of basic CPUID
>>> - //
>>> - AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>>> -
>>> - //
>>> - // If the extended topology enumeration leaf is available, it
>>> - // is the preferred mechanism for enumerating topology.
>>> - //
>>> - if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>>> - AsmCpuidEx (
>>> - CPUID_EXTENDED_TOPOLOGY,
>>> - 0,
>>> - &ExtendedTopologyEax.Uint32,
>>> - &ExtendedTopologyEbx.Uint32,
>>> - &ExtendedTopologyEcx.Uint32,
>>> - NULL
>>> - );
>>> - //
>>> - // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>>> - // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is
>> not
>>> - // supported on that processor.
>>> - //
>>> - if (ExtendedTopologyEbx.Uint32 != 0) {
>>> - TopologyLeafSupported = TRUE;
>>> -
>>> - //
>>> - // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters
>> to extract
>>> - // the SMT sub-field of x2APIC ID.
>>> - //
>>> - LevelType = ExtendedTopologyEcx.Bits.LevelType;
>>> - ASSERT (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>>> - ThreadBits = ExtendedTopologyEax.Bits.ApicIdShift;
>>> -
>>> - //
>>> - // Software must not assume any "level type" encoding
>>> - // value to be related to any sub-leaf index, except sub-leaf 0.
>>> - //
>>> - SubIndex = 1;
>>> - do {
>>> - AsmCpuidEx (
>>> - CPUID_EXTENDED_TOPOLOGY,
>>> - SubIndex,
>>> - &ExtendedTopologyEax.Uint32,
>>> - NULL,
>>> - &ExtendedTopologyEcx.Uint32,
>>> - NULL
>>> - );
>>> - LevelType = ExtendedTopologyEcx.Bits.LevelType;
>>> - if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>>> - CoreBits = ExtendedTopologyEax.Bits.ApicIdShift - ThreadBits;
>>> - break;
>>> - }
>>> - SubIndex++;
>>> - } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>>> - }
>>> - }
>>> -
>>> - if (!TopologyLeafSupported) {
>>> - AsmCpuid (CPUID_VERSION_INFO, NULL, &VersionInfoEbx.Uint32,
>> NULL, NULL);
>>> - MaxLogicProcessorsPerPackage =
>>> VersionInfoEbx.Bits.MaximumAddressableIdsForLogicalProcessors;
>>> - if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>>> - AsmCpuidEx (CPUID_CACHE_PARAMS, 0, &CacheParamsEax.Uint32,
>> NULL, NULL, NULL);
>>> - MaxCoresPerPackage =
>>> CacheParamsEax.Bits.MaximumAddressableIdsForLogicalProcessors + 1;
>>> - } else {
>>> - //
>>> - // Must be a single-core processor.
>>> - //
>>> - MaxCoresPerPackage = 1;
>>> - }
>>> -
>>> - ThreadBits = (UINTN) (HighBitSet32 (MaxLogicProcessorsPerPackage /
>>> MaxCoresPerPackage - 1) + 1);
>>> - CoreBits = (UINTN) (HighBitSet32 (MaxCoresPerPackage - 1) + 1);
>>> - }
>>> -
>>> - Location->Thread = InitialApicId & ((1 << ThreadBits) - 1);
>>> - Location->Core = (InitialApicId >> ThreadBits) & ((1 << CoreBits) - 1);
>>> - Location->Package = (InitialApicId >> (ThreadBits + CoreBits));
>>> -}
>>> -
>>> -/**
>>> Worker function for SwitchBSP().
>>>
>>> Worker function for SwitchBSP(), assigned to the AP which is intended
>>> @@ -1451,7 +1325,7 @@ MpInitLibGetProcessorInfo (
>>> //
>>> // Get processor location information
>>> //
>>> - ExtractProcessorLocation (CpuMpData-
>>> CpuData[ProcessorNumber].ApicId,
>>> &ProcessorInfoBuffer->Location);
>>> + GetProcessorLocation (CpuMpData-
>>> CpuData[ProcessorNumber].ApicId,
>>> &ProcessorInfoBuffer->Location);
>>>
>>> if (HealthData != NULL) {
>>> HealthData->Uint32 = CpuMpData->CpuData[ProcessorNumber].Health;
>>> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>>> b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>>> index 40f2a17..67cd0a0 100644
>>> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>>> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c
>>> @@ -27,125 +27,6 @@ EFI_SMM_CPU_SERVICE_PROTOCOL
>> mSmmCpuService = {
>>> };
>>>
>>> /**
>>> - Get Package ID/Core ID/Thread ID of a processor.
>>> -
>>> - APIC ID must be an initial APIC ID.
>>> -
>>> - The algorithm below assumes the target system has symmetry across
>> physical package
>>> boundaries
>>> - with respect to the number of logical processors per package, number of
>> cores per
>>> package.
>>> -
>>> - @param ApicId APIC ID of the target logical processor.
>>> - @param Location Returns the processor location information.
>>> -**/
>>> -VOID
>>> -SmmGetProcessorLocation (
>>> - IN UINT32 ApicId,
>>> - OUT EFI_CPU_PHYSICAL_LOCATION *Location
>>> - )
>>> -{
>>> - UINTN ThreadBits;
>>> - UINTN CoreBits;
>>> - UINT32 RegEax;
>>> - UINT32 RegEbx;
>>> - UINT32 RegEcx;
>>> - UINT32 RegEdx;
>>> - UINT32 MaxCpuIdIndex;
>>> - UINT32 SubIndex;
>>> - UINTN LevelType;
>>> - UINT32 MaxLogicProcessorsPerPackage;
>>> - UINT32 MaxCoresPerPackage;
>>> - BOOLEAN TopologyLeafSupported;
>>> -
>>> - ASSERT (Location != NULL);
>>> -
>>> - ThreadBits = 0;
>>> - CoreBits = 0;
>>> - TopologyLeafSupported = FALSE;
>>> -
>>> - //
>>> - // Check if the processor is capable of supporting more than one logical
>> processor.
>>> - //
>>> - AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx);
>>> - ASSERT ((RegEdx & BIT28) != 0);
>>> -
>>> - //
>>> - // Assume three-level mapping of APIC ID: Package:Core:SMT.
>>> - //
>>> -
>>> - //
>>> - // Get the max index of basic CPUID
>>> - //
>>> - AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
>>> -
>>> - //
>>> - // If the extended topology enumeration leaf is available, it
>>> - // is the preferred mechanism for enumerating topology.
>>> - //
>>> - if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
>>> - AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, 0, &RegEax, &RegEbx,
>> &RegEcx, NULL);
>>> - //
>>> - // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input
>> value for
>>> - // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is
>> not
>>> - // supported on that processor.
>>> - //
>>> - if ((RegEbx & 0xffff) != 0) {
>>> - TopologyLeafSupported = TRUE;
>>> -
>>> - //
>>> - // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters
>> to extract
>>> - // the SMT sub-field of x2APIC ID.
>>> - //
>>> - LevelType = (RegEcx >> 8) & 0xff;
>>> - ASSERT (LevelType ==
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
>>> - if ((RegEbx & 0xffff) > 1 ) {
>>> - ThreadBits = RegEax & 0x1f;
>>> - } else {
>>> - //
>>> - // HT is not supported
>>> - //
>>> - ThreadBits = 0;
>>> - }
>>> -
>>> - //
>>> - // Software must not assume any "level type" encoding
>>> - // value to be related to any sub-leaf index, except sub-leaf 0.
>>> - //
>>> - SubIndex = 1;
>>> - do {
>>> - AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, SubIndex, &RegEax,
>> NULL, &RegEcx, NULL);
>>> - LevelType = (RegEcx >> 8) & 0xff;
>>> - if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
>>> - CoreBits = (RegEax & 0x1f) - ThreadBits;
>>> - break;
>>> - }
>>> - SubIndex++;
>>> - } while (LevelType !=
>> CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
>>> - }
>>> - }
>>> -
>>> - if (!TopologyLeafSupported) {
>>> - AsmCpuid (CPUID_VERSION_INFO, NULL, &RegEbx, NULL, NULL);
>>> - MaxLogicProcessorsPerPackage = (RegEbx >> 16) & 0xff;
>>> - if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
>>> - AsmCpuidEx (CPUID_CACHE_PARAMS, 0, &RegEax, NULL, NULL, NULL);
>>> - MaxCoresPerPackage = (RegEax >> 26) + 1;
>>> - } else {
>>> - //
>>> - // Must be a single-core processor.
>>> - //
>>> - MaxCoresPerPackage = 1;
>>> - }
>>> -
>>> - ThreadBits = (UINTN) (HighBitSet32 (MaxLogicProcessorsPerPackage /
>>> MaxCoresPerPackage - 1) + 1);
>>> - CoreBits = (UINTN) (HighBitSet32 (MaxCoresPerPackage - 1) + 1);
>>> - }
>>> -
>>> - Location->Thread = ApicId & ~((-1) << ThreadBits);
>>> - Location->Core = (ApicId >> ThreadBits) & ~((-1) << CoreBits);
>>> - Location->Package = (ApicId >> (ThreadBits+ CoreBits));
>>> -}
>>> -
>>> -/**
>>> Gets processor information on the requested processor at the instant this
>> call is
>>> made.
>>>
>>> @param[in] This A pointer to the
>> EFI_SMM_CPU_SERVICE_PROTOCOL
>>> instance.
>>> @@ -280,7 +161,7 @@ SmmAddProcessor (
>>> gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId ==
>> INVALID_APIC_ID) {
>>> gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId = ProcessorId;
>>> gSmmCpuPrivate->ProcessorInfo[Index].StatusFlag = 0;
>>> - SmmGetProcessorLocation ((UINT32)ProcessorId, &gSmmCpuPrivate-
>>>> ProcessorInfo[Index].Location);
>>> + GetProcessorLocation ((UINT32)ProcessorId, &gSmmCpuPrivate-
>>>> ProcessorInfo[Index].Location);
>>>
>>> *ProcessorNumber = Index;
>>> gSmmCpuPrivate->Operation[Index] = SmmCpuAdd;
>>> --
>>> 1.9.1
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-10-31 6:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-28 17:38 [v3] UefiCpuPkg: Move GetProcessorLocation() to LocalApicLib library Leo Duran
2016-10-28 18:42 ` Laszlo Ersek
2016-10-28 21:12 ` Kinney, Michael D
2016-10-28 21:17 ` Duran, Leo
2016-10-28 21:48 ` Laszlo Ersek
2016-10-31 6:40 ` Fan, Jeff [this message]
2016-10-31 16:45 ` Duran, Leo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542CF652F8836A4AB8DBFAAD40ED192A4A2BB7EA@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox