From: "Fan, Jeff" <jeff.fan@intel.com>
To: Laszlo Ersek <lersek@redhat.com>,
"edk2-devel@ml01.01.org" <edk2-devel@ml01.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"Tian, Feng" <feng.tian@intel.com>,
"Gao, Liming" <liming.gao@intel.com>
Subject: Re: [PATCH] UefiCpuPkg/MpInitLib: Do not wakeup AP if only one processor supported
Date: Mon, 7 Nov 2016 00:47:41 +0000 [thread overview]
Message-ID: <542CF652F8836A4AB8DBFAAD40ED192A4A2C434D@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <9af37565-ad49-6e1a-bf33-07e1254c4217@redhat.com>
Laszlo,
Yes. MP PPI and Protocol still be installed even there is only one processor supported or found?
Jeff
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Laszlo Ersek
Sent: Saturday, November 05, 2016 12:40 AM
To: Fan, Jeff; edk2-devel@ml01.01.org
Cc: Kinney, Michael D; Tian, Feng; Gao, Liming
Subject: Re: [edk2] [PATCH] UefiCpuPkg/MpInitLib: Do not wakeup AP if only one processor supported
On 11/04/16 09:18, Jeff Fan wrote:
> If MaxLogicalProcessorNumber is only 1, we needn't to wake up APs at
> all and needn't to register callback functions.
>
> It could improve boot performance on single supported system.
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=204
>
> Cc: Feng Tian <feng.tian@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Michael Kinney <michael.d.kinney@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Jeff Fan <jeff.fan@intel.com>
> ---
> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 7 ++++++
> UefiCpuPkg/Library/MpInitLib/MpLib.c | 39 +++++++++++++++++++--------------
> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 8 +++++++
> 3 files changed, 37 insertions(+), 17 deletions(-)
The MP services protocol and PPI that depend on this library will remain available to callers, right?
Thanks
Laszlo
> diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
> b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
> index b399f1c..eb36d6f 100644
> --- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
> @@ -290,6 +290,13 @@ InitMpGlobalData (
>
> SaveCpuMpData (CpuMpData);
>
> + if (CpuMpData->CpuCount == 1) {
> + //
> + // If only BSP exists, return
> + //
> + return;
> + }
> +
> //
> // Avoid APs access invalid buff data which allocated by BootServices,
> // so we will allocate reserved data for AP loop code.
> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> index 56b870e..a0edc55 100644
> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> @@ -1143,6 +1143,7 @@ MpInitLibInitialize (
> } else {
> MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;
> }
> + ASSERT (MaxLogicalProcessorNumber != 0);
>
> AsmGetAddressMap (&AddressMap);
> ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof
> (MP_CPU_EXCHANGE_INFO); @@ -1209,10 +1210,12 @@ MpInitLibInitialize (
> MtrrGetAllMtrrs (&CpuMpData->MtrrTable);
>
> if (OldCpuMpData == NULL) {
> - //
> - // Wakeup all APs and calculate the processor count in system
> - //
> - CollectProcessorCount (CpuMpData);
> + if (MaxLogicalProcessorNumber > 1) {
> + //
> + // Wakeup all APs and calculate the processor count in system
> + //
> + CollectProcessorCount (CpuMpData);
> + }
> } else {
> //
> // APs have been wakeup before, just get the CPU Information @@
> -1238,19 +1241,21 @@ MpInitLibInitialize (
> sizeof (CPU_VOLATILE_REGISTERS)
> );
> }
> - //
> - // Wakeup APs to do some AP initialize sync
> - //
> - WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData);
> - //
> - // Wait for all APs finished initialization
> - //
> - while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
> - CpuPause ();
> - }
> - CpuMpData->InitFlag = ApInitDone;
> - for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
> - SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
> + if (MaxLogicalProcessorNumber > 1) {
> + //
> + // Wakeup APs to do some AP initialize sync
> + //
> + WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData);
> + //
> + // Wait for all APs finished initialization
> + //
> + while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
> + CpuPause ();
> + }
> + CpuMpData->InitFlag = ApInitDone;
> + for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
> + SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
> + }
> }
> }
>
> diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> index e242d37..1f2fcb8 100644
> --- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> @@ -321,6 +321,14 @@ InitMpGlobalData (
> EFI_STATUS Status;
>
> SaveCpuMpData (CpuMpData);
> +
> + if (CpuMpData->CpuCount == 1) {
> + //
> + // If only BSP exists, return
> + //
> + return;
> + }
> +
> //
> // Register an event for EndOfPei
> //
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-11-07 0:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-04 8:18 [PATCH] UefiCpuPkg/MpInitLib: Do not wakeup AP if only one processor supported Jeff Fan
2016-11-04 16:40 ` Laszlo Ersek
2016-11-07 0:47 ` Fan, Jeff [this message]
2016-11-07 13:37 ` Laszlo Ersek
2016-11-08 0:55 ` Fan, Jeff
2016-11-08 13:37 ` Laszlo Ersek
2016-11-09 7:21 ` Tian, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542CF652F8836A4AB8DBFAAD40ED192A4A2C434D@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox