public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Lendacky, Thomas" <thomas.lendacky@amd.com>
To: devel@edk2.groups.io
Subject: [PATCH v7 40/43] UefiCpuPkg: Allow AP booting under SEV-ES
Date: Wed, 22 Apr 2020 23:33:40 -0500	[thread overview]
Message-ID: <544dc0d6cf248a233378da864925da163014f07b.1587577317.git.thomas.lendacky@amd.com> (raw)
In-Reply-To: <cover.1587577317.git.thomas.lendacky@amd.com>

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198

Typically, an AP is booted using the INIT-SIPI-SIPI sequence. This
sequence is intercepted by the hypervisor, which sets the AP's registers
to the values requested by the sequence. At that point, the hypervisor can
start the AP, which will then begin execution at the appropriate location.

Under SEV-ES, AP booting presents some challenges since the hypervisor is
not allowed to alter the AP's register state. In this situation, we have
to distinguish between the AP's first boot and AP's subsequent boots.

First boot:
 Once the AP's register state has been defined (which is before the guest
 is first booted) it cannot be altered. Should the hypervisor attempt to
 alter the register state, the change would be detected by the hardware
 and the VMRUN instruction would fail. Given this, the first boot for the
 AP is required to begin execution with this initial register state, which
 is typically the reset vector. This prevents the BSP from directing the
 AP startup location through the INIT-SIPI-SIPI sequence.

 To work around this, the firmware will provide a build time reserved area
 that can be used as the initial IP value. The hypervisor can extract this
 location value by checking for the SEV-ES reset block GUID that must be
 located 48-bytes from the end of the firmware. The format of the SEV-ES
 reset block area is:

   0x00 - 0x01 - SEV-ES Reset IP
   0x02 - 0x03 - SEV-ES Reset CS Segment Base[31:16]
   0x04 - 0x05 - Size of the SEV-ES reset block
   0x06 - 0x15 - SEV-ES Reset Block GUID
                   (00f771de-1a7e-4fcb-890e-68c77e2fb44e)

   The total size is 22 bytes. Any expansion to this block must be done
   by adding new values before existing values.

 The hypervisor will use the IP and CS values obtained from the SEV-ES
 reset block to set as the AP's initial values. The CS Segment Base
 represents the upper 16 bits of the CS segment base and must be left
 shifted by 16 bits to form the complete CS segment base value.

 Before booting the AP for the first time, the BSP must initialize the
 SEV-ES reset area. This consists of programming a FAR JMP instruction
 to the contents of a memory location that is also located in the SEV-ES
 reset area. The BSP must program the IP and CS values for the FAR JMP
 based on values drived from the INIT-SIPI-SIPI sequence.

Subsequent boots:
 Again, the hypervisor cannot alter the AP register state, so a method is
 required to take the AP out of halt state and redirect it to the desired
 IP location. If it is determined that the AP is running in an SEV-ES
 guest, then instead of calling CpuSleep(), a VMGEXIT is issued with the
 AP Reset Hold exit code (0x80000004). The hypervisor will put the AP in
 a halt state, waiting for an INIT-SIPI-SIPI sequence. Once the sequence
 is recognized, the hypervisor will resume the AP. At this point the AP
 must transition from the current 64-bit long mode down to 16-bit real
 mode and begin executing at the derived location from the INIT-SIPI-SIPI
 sequence.

 Another change is around the area of obtaining the (x2)APIC ID during AP
 startup. During AP startup, the AP can't take a #VC exception before the
 AP has established a stack. However, the AP stack is set by using the
 (x2)APIC ID, which is obtained through CPUID instructions. A CPUID
 instruction will cause a #VC, so a different method must be used. The
 GHCB protocol supports a method to obtain CPUID information from the
 hypervisor through the GHCB MSR. This method does not require a stack,
 so it is used to obtain the necessary CPUID information to determine the
 (x2)APIC ID.

The new 16-bit protected mode GDT entry is used in order to transition
from 64-bit long mode down to 16-bit real mode.

A new assembler routine is created that takes the AP from 64-bit long mode
to 16-bit real mode.  This is located under 1MB in memory and transitions
from 64-bit long mode to 32-bit compatibility mode to 16-bit protected
mode and finally 16-bit real mode.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf |   3 +
 UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf |   3 +
 UefiCpuPkg/Library/MpInitLib/MpLib.h          |  60 ++++
 UefiCpuPkg/Library/MpInitLib/DxeMpLib.c       |  70 ++++-
 UefiCpuPkg/Library/MpInitLib/MpLib.c          | 264 +++++++++++++++++-
 UefiCpuPkg/Library/MpInitLib/PeiMpLib.c       |  19 ++
 UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c  |   2 +-
 UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc   |   2 +-
 .../Library/MpInitLib/Ia32/MpFuncs.nasm       |  15 +
 UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc    |   4 +-
 UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 239 ++++++++++++++++
 11 files changed, 667 insertions(+), 14 deletions(-)

diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 4ea94848dc11..87cb63f83133 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -51,6 +51,7 @@ [LibraryClasses]
   UefiBootServicesTableLib
   DebugAgentLib
   SynchronizationLib
+  VmgExitLib
 
 [Protocols]
   gEfiTimerArchProtocolGuid                     ## SOMETIMES_CONSUMES
@@ -71,4 +72,6 @@ [Pcd]
   gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate                       ## SOMETIMES_CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdCpuApStatusCheckIntervalInMicroSeconds  ## CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled                          ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase                       ## SOMETIMES_CONSUMES
   gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard                      ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase                           ## CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index b4dc7e69d829..c684bb4812c1 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -50,6 +50,7 @@ [LibraryClasses]
   UefiCpuLib
   SynchronizationLib
   PeiServicesLib
+  VmgExitLib
 
 [Pcd]
   gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber        ## CONSUMES
@@ -61,6 +62,8 @@ [Pcd]
   gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode                       ## CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate                   ## SOMETIMES_CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled                      ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase                   ## SOMETIMES_CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase                       ## CONSUMES
 
 [Ppis]
   gEdkiiPeiShadowMicrocodePpiGuid        ## SOMETIMES_CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index c320ad8334bb..56726e26ef5b 100755
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -172,6 +172,11 @@ typedef struct {
   UINT8             *RelocateApLoopFuncAddress;
   UINTN             RelocateApLoopFuncSize;
   UINTN             ModeTransitionOffset;
+  UINTN             SwitchToRealSize;
+  UINTN             SwitchToRealOffset;
+  UINTN             SwitchToRealNoNxOffset;
+  UINTN             SwitchToRealPM16ModeOffset;
+  UINTN             SwitchToRealPM16ModeSize;
 } MP_ASSEMBLY_ADDRESS_MAP;
 
 typedef struct _CPU_MP_DATA  CPU_MP_DATA;
@@ -210,6 +215,8 @@ typedef struct {
   // Enable5LevelPaging indicates whether 5-level paging is enabled in long mode.
   //
   BOOLEAN               Enable5LevelPaging;
+  BOOLEAN               SevEsIsEnabled;
+  UINTN                 GhcbBase;
 } MP_CPU_EXCHANGE_INFO;
 
 #pragma pack()
@@ -256,6 +263,7 @@ struct _CPU_MP_DATA {
   UINT8                          ApLoopMode;
   UINT8                          ApTargetCState;
   UINT16                         PmCodeSegment;
+  UINT16                         Pm16CodeSegment;
   CPU_AP_DATA                    *CpuData;
   volatile MP_CPU_EXCHANGE_INFO  *MpCpuExchangeInfo;
 
@@ -277,8 +285,47 @@ struct _CPU_MP_DATA {
   BOOLEAN                        WakeUpByInitSipiSipi;
 
   BOOLEAN                        SevEsIsEnabled;
+  UINTN                          SevEsAPBuffer;
+  UINTN                          SevEsAPResetStackStart;
+  CPU_MP_DATA                    *NewCpuMpData;
+
+  UINT64                         GhcbBase;
 };
 
+#define AP_RESET_STACK_SIZE 64
+
+#pragma pack(1)
+
+typedef struct {
+  UINT8   InsnBuffer[8];
+  UINT16  Rip;
+  UINT16  Segment;
+} SEV_ES_AP_JMP_FAR;
+
+#pragma pack()
+
+/**
+  Assembly code to move an AP from long mode to real mode.
+
+  Move an AP from long mode to real mode in preparation to invoking
+  the reset vector.  This is used for SEV-ES guests where a hypervisor
+  is not allowed to set the CS and RIP to point to the reset vector.
+
+  @param[in]  BufferStart  The reset vector target.
+  @param[in]  Code16       16-bit protected mode code segment value.
+  @param[in]  Code32       32-bit protected mode code segment value.
+  @param[in]  StackStart   The start of a stack to be used for transitioning
+                           from long mode to real mode.
+**/
+typedef
+VOID
+(EFIAPI AP_RESET) (
+  IN UINTN    BufferStart,
+  IN UINT16   Code16,
+  IN UINT16   Code32,
+  IN UINTN    StackStart
+  );
+
 extern EFI_GUID mCpuInitMpLibHobGuid;
 
 /**
@@ -384,6 +431,19 @@ GetModeTransitionBuffer (
   IN UINTN                BufferSize
   );
 
+/**
+  Return the address of the SEV-ES AP jump table.
+
+  This buffer is required in order for an SEV-ES guest to transition from
+  UEFI into an OS.
+
+  @retval other   Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+  VOID
+  );
+
 /**
   This function will be called by BSP to wakeup AP.
 
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index 8ccddf8e9f9c..19527300ff3a 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -12,6 +12,8 @@
 #include <Library/UefiBootServicesTableLib.h>
 #include <Library/DebugAgentLib.h>
 #include <Library/DxeServicesTableLib.h>
+#include <Register/Amd/Fam17Msr.h>
+#include <Register/Amd/Ghcb.h>
 
 #include <Protocol/Timer.h>
 
@@ -144,6 +146,39 @@ GetModeTransitionBuffer (
   return (UINTN)StartAddress;
 }
 
+/**
+  Return the address of the SEV-ES AP jump table.
+
+  This buffer is required in order for an SEV-ES guest to transition from
+  UEFI into an OS.
+
+  @retval other   Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+  VOID
+  )
+{
+  EFI_STATUS            Status;
+  EFI_PHYSICAL_ADDRESS  StartAddress;
+
+  //
+  // Allocate 1 page for AP jump table page
+  //
+  StartAddress = BASE_4GB - 1;
+  Status = gBS->AllocatePages (
+                  AllocateMaxAddress,
+                  EfiReservedMemoryType,
+                  1,
+                  &StartAddress
+                  );
+  ASSERT_EFI_ERROR (Status);
+
+  DEBUG ((DEBUG_INFO, "Dxe: SevEsAPMemory = %lx\n", (UINTN) StartAddress));
+
+  return (UINTN) StartAddress;
+}
+
 /**
   Checks APs status and updates APs status if needed.
 
@@ -218,6 +253,38 @@ CheckApsStatus (
   }
 }
 
+/**
+  Get Protected mode code segment with 16-bit default addressing
+  from current GDT table.
+
+  @return  Protected mode 16-bit code segment value.
+**/
+UINT16
+GetProtectedMode16CS (
+  VOID
+  )
+{
+  IA32_DESCRIPTOR          GdtrDesc;
+  IA32_SEGMENT_DESCRIPTOR  *GdtEntry;
+  UINTN                    GdtEntryCount;
+  UINT16                   Index;
+
+  Index = (UINT16) -1;
+  AsmReadGdtr (&GdtrDesc);
+  GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+  GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+  for (Index = 0; Index < GdtEntryCount; Index++) {
+    if (GdtEntry->Bits.L == 0) {
+      if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 0) {
+        break;
+      }
+    }
+    GdtEntry++;
+  }
+  ASSERT (Index != GdtEntryCount);
+  return Index * 8;
+}
+
 /**
   Get Protected mode code segment from current GDT table.
 
@@ -238,7 +305,7 @@ GetProtectedModeCS (
   GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
   for (Index = 0; Index < GdtEntryCount; Index++) {
     if (GdtEntry->Bits.L == 0) {
-      if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.L == 0) {
+      if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 1) {
         break;
       }
     }
@@ -300,6 +367,7 @@ MpInitChangeApLoopCallback (
 
   CpuMpData = GetCpuMpData ();
   CpuMpData->PmCodeSegment = GetProtectedModeCS ();
+  CpuMpData->Pm16CodeSegment = GetProtectedMode16CS ();
   CpuMpData->ApLoopMode = PcdGet8 (PcdCpuApLoopMode);
   mNumberToFinish = CpuMpData->CpuCount - 1;
   WakeUpAP (CpuMpData, TRUE, 0, RelocateApLoop, NULL, TRUE);
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 81c5b1a5b701..966b53045d22 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -9,6 +9,9 @@
 **/
 
 #include "MpLib.h"
+#include <Library/VmgExitLib.h>
+#include <Register/Amd/Fam17Msr.h>
+#include <Register/Amd/Ghcb.h>
 
 EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
 
@@ -314,6 +317,14 @@ GetApLoopMode (
       //
       ApLoopMode = ApInHltLoop;
     }
+
+    if (PcdGetBool (PcdSevEsIsEnabled)) {
+      //
+      // For SEV-ES, force AP in Hlt-loop mode in order to use the GHCB
+      // protocol for starting APs
+      //
+      ApLoopMode = ApInHltLoop;
+    }
   }
 
   if (ApLoopMode != ApInMwaitLoop) {
@@ -610,6 +621,112 @@ InitializeApData (
   SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
 }
 
+/**
+  Get Protected mode code segment with 16-bit default addressing
+  from current GDT table.
+
+  @return  Protected mode 16-bit code segment value.
+**/
+STATIC
+UINT16
+GetProtectedMode16CS (
+  VOID
+  )
+{
+  IA32_DESCRIPTOR          GdtrDesc;
+  IA32_SEGMENT_DESCRIPTOR  *GdtEntry;
+  UINTN                    GdtEntryCount;
+  UINT16                   Index;
+
+  Index = (UINT16) -1;
+  AsmReadGdtr (&GdtrDesc);
+  GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+  GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+  for (Index = 0; Index < GdtEntryCount; Index++) {
+    if (GdtEntry->Bits.L == 0 &&
+        GdtEntry->Bits.DB == 0 &&
+        GdtEntry->Bits.Type > 8) {
+      break;
+    }
+    GdtEntry++;
+  }
+  ASSERT (Index != GdtEntryCount);
+  return Index * 8;
+}
+
+/**
+  Get Protected mode code segment with 32-bit default addressing
+  from current GDT table.
+
+  @return  Protected mode 32-bit code segment value.
+**/
+STATIC
+UINT16
+GetProtectedMode32CS (
+  VOID
+  )
+{
+  IA32_DESCRIPTOR          GdtrDesc;
+  IA32_SEGMENT_DESCRIPTOR  *GdtEntry;
+  UINTN                    GdtEntryCount;
+  UINT16                   Index;
+
+  Index = (UINT16) -1;
+  AsmReadGdtr (&GdtrDesc);
+  GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+  GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+  for (Index = 0; Index < GdtEntryCount; Index++) {
+    if (GdtEntry->Bits.L == 0 &&
+        GdtEntry->Bits.DB == 1 &&
+        GdtEntry->Bits.Type > 8) {
+      break;
+    }
+    GdtEntry++;
+  }
+  ASSERT (Index != GdtEntryCount);
+  return Index * 8;
+}
+
+/**
+  Reset an AP when in SEV-ES mode.
+
+  If successful, this function never returns.
+
+  @param[in] Ghcb                 Pointer to the GHCB
+  @param[in] CpuMpData            Pointer to CPU MP Data
+
+**/
+STATIC
+VOID
+MpInitLibSevEsAPReset (
+  IN GHCB                         *Ghcb,
+  IN CPU_MP_DATA                  *CpuMpData
+  )
+{
+  UINT16           Code16, Code32;
+  AP_RESET         *APResetFn;
+  UINTN            BufferStart;
+  UINTN            StackStart;
+
+  Code16 = GetProtectedMode16CS ();
+  Code32 = GetProtectedMode32CS ();
+
+  if (CpuMpData->WakeupBufferHigh != 0) {
+    APResetFn = (AP_RESET *) (CpuMpData->WakeupBufferHigh + CpuMpData->AddressMap.SwitchToRealNoNxOffset);
+  } else {
+    APResetFn = (AP_RESET *) (CpuMpData->MpCpuExchangeInfo->BufferStart + CpuMpData->AddressMap.SwitchToRealOffset);
+  }
+
+  BufferStart = CpuMpData->MpCpuExchangeInfo->BufferStart;
+  StackStart = CpuMpData->SevEsAPResetStackStart -
+                 (AP_RESET_STACK_SIZE * GetApicId ());
+
+  //
+  // This call never returns.
+  //
+  APResetFn (BufferStart, Code16, Code32, StackStart);
+}
+
 /**
   This function will be called from AP reset code if BSP uses WakeUpAP.
 
@@ -765,7 +882,28 @@ ApWakeupFunction (
       //
       while (TRUE) {
         DisableInterrupts ();
-        CpuSleep ();
+        if (CpuMpData->SevEsIsEnabled) {
+          MSR_SEV_ES_GHCB_REGISTER  Msr;
+          GHCB                      *Ghcb;
+
+          Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+          Ghcb = Msr.Ghcb;
+
+          VmgInit (Ghcb);
+          VmgExit (Ghcb, SvmExitApResetHold, 0, 0);
+          /*TODO: Check return value to verify SIPI issued */
+
+          //
+          // Awakened in a new phase? Use the new CpuMpData
+          //
+          if (CpuMpData->NewCpuMpData) {
+            CpuMpData = CpuMpData->NewCpuMpData;
+          }
+
+          MpInitLibSevEsAPReset (Ghcb, CpuMpData);
+        } else {
+          CpuSleep ();
+        }
         CpuPause ();
       }
     }
@@ -878,6 +1016,9 @@ FillExchangeInfoData (
   ExchangeInfo->Enable5LevelPaging = (BOOLEAN) (Cr4.Bits.LA57 == 1);
   DEBUG ((DEBUG_INFO, "%a: 5-Level Paging = %d\n", gEfiCallerBaseName, ExchangeInfo->Enable5LevelPaging));
 
+  ExchangeInfo->SevEsIsEnabled  = CpuMpData->SevEsIsEnabled;
+  ExchangeInfo->GhcbBase        = CpuMpData->GhcbBase;
+
   //
   // Get the BSP's data of GDT and IDT
   //
@@ -904,8 +1045,9 @@ FillExchangeInfoData (
   // EfiBootServicesCode to avoid page fault if NX memory protection is enabled.
   //
   if (CpuMpData->WakeupBufferHigh != 0) {
-    Size = CpuMpData->AddressMap.RendezvousFunnelSize -
-           CpuMpData->AddressMap.ModeTransitionOffset;
+    Size = CpuMpData->AddressMap.RendezvousFunnelSize +
+             CpuMpData->AddressMap.SwitchToRealSize -
+             CpuMpData->AddressMap.ModeTransitionOffset;
     CopyMem (
       (VOID *)CpuMpData->WakeupBufferHigh,
       CpuMpData->AddressMap.RendezvousFunnelAddress +
@@ -958,7 +1100,8 @@ BackupAndPrepareWakeupBuffer(
   CopyMem (
     (VOID *) CpuMpData->WakeupBuffer,
     (VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress,
-    CpuMpData->AddressMap.RendezvousFunnelSize
+    CpuMpData->AddressMap.RendezvousFunnelSize +
+      CpuMpData->AddressMap.SwitchToRealSize
     );
 }
 
@@ -979,6 +1122,44 @@ RestoreWakeupBuffer(
     );
 }
 
+/**
+  Calculate the size of the reset stack.
+
+  @retval                 Total amount of memory required for stacks
+**/
+STATIC
+UINTN
+GetApResetStackSize (
+  VOID
+  )
+{
+  return AP_RESET_STACK_SIZE * PcdGet32(PcdCpuMaxLogicalProcessorNumber);
+}
+
+/**
+  Calculate the size of the reset vector.
+
+  @param[in]  AddressMap  The pointer to Address Map structure.
+
+  @retval                 Total amount of memory required for the AP reset area
+**/
+STATIC
+UINTN
+GetApResetVectorSize (
+  IN MP_ASSEMBLY_ADDRESS_MAP  *AddressMap
+  )
+{
+  UINTN  Size;
+
+  Size = ALIGN_VALUE (AddressMap->RendezvousFunnelSize +
+                        AddressMap->SwitchToRealSize +
+                        sizeof (MP_CPU_EXCHANGE_INFO),
+                      CPU_STACK_ALIGNMENT);
+  Size += GetApResetStackSize ();
+
+  return Size;
+}
+
 /**
   Allocate reset vector buffer.
 
@@ -992,16 +1173,22 @@ AllocateResetVector (
   UINTN           ApResetVectorSize;
 
   if (CpuMpData->WakeupBuffer == (UINTN) -1) {
-    ApResetVectorSize = CpuMpData->AddressMap.RendezvousFunnelSize +
-                          sizeof (MP_CPU_EXCHANGE_INFO);
+    ApResetVectorSize = GetApResetVectorSize (&CpuMpData->AddressMap);
 
     CpuMpData->WakeupBuffer      = GetWakeupBuffer (ApResetVectorSize);
     CpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *) (UINTN)
-                    (CpuMpData->WakeupBuffer + CpuMpData->AddressMap.RendezvousFunnelSize);
+                    (CpuMpData->WakeupBuffer +
+                       CpuMpData->AddressMap.RendezvousFunnelSize +
+                       CpuMpData->AddressMap.SwitchToRealSize);
     CpuMpData->WakeupBufferHigh  = GetModeTransitionBuffer (
-                                    CpuMpData->AddressMap.RendezvousFunnelSize -
+                                    CpuMpData->AddressMap.RendezvousFunnelSize +
+                                    CpuMpData->AddressMap.SwitchToRealSize -
                                     CpuMpData->AddressMap.ModeTransitionOffset
                                     );
+    //
+    // The reset stack starts at the end of the buffer.
+    //
+    CpuMpData->SevEsAPResetStackStart = CpuMpData->WakeupBuffer + ApResetVectorSize;
   }
   BackupAndPrepareWakeupBuffer (CpuMpData);
 }
@@ -1016,7 +1203,31 @@ FreeResetVector (
   IN CPU_MP_DATA              *CpuMpData
   )
 {
-  RestoreWakeupBuffer (CpuMpData);
+  //
+  // If SEV-ES is enabled, the reset area is needed for AP parking and
+  // and AP startup in the OS, so the reset area is reserved. Do not
+  // perform the restore as this will overwrite memory which has data
+  // needed by SEV-ES.
+  //
+  if (!CpuMpData->SevEsIsEnabled) {
+    RestoreWakeupBuffer (CpuMpData);
+  }
+}
+
+/**
+  Allocate the SEV-ES AP jump table buffer.
+
+  @param[in, out]  CpuMpData  The pointer to CPU MP Data structure.
+**/
+VOID
+AllocateSevEsAPMemory (
+  IN OUT CPU_MP_DATA          *CpuMpData
+  )
+{
+  if (CpuMpData->SevEsAPBuffer == (UINTN) -1) {
+    CpuMpData->SevEsAPBuffer =
+      CpuMpData->SevEsIsEnabled ? GetSevEsAPMemory () : 0;
+  }
 }
 
 /**
@@ -1053,6 +1264,7 @@ WakeUpAP (
       CpuMpData->InitFlag   != ApInitDone) {
     ResetVectorRequired = TRUE;
     AllocateResetVector (CpuMpData);
+    AllocateSevEsAPMemory (CpuMpData);
     FillExchangeInfoData (CpuMpData);
     SaveLocalApicTimerSetting (CpuMpData);
   }
@@ -1089,6 +1301,35 @@ WakeUpAP (
       }
     }
     if (ResetVectorRequired) {
+      //
+      // For SEV-ES, the initial AP boot address will be defined by
+      // PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address
+      // from the original INIT-SIPI-SIPI.
+      //
+      if (CpuMpData->SevEsIsEnabled) {
+        SEV_ES_AP_JMP_FAR *JmpFar;
+        UINT32            Offset, InsnByte;
+        UINT8             LoNib, HiNib;
+
+        JmpFar = (SEV_ES_AP_JMP_FAR *) FixedPcdGet32 (PcdSevEsWorkAreaBase);
+        ASSERT (JmpFar != NULL);
+
+        Offset = FixedPcdGet32 (PcdSevEsWorkAreaBase);
+        Offset += sizeof (JmpFar->InsnBuffer);
+        LoNib = (UINT8) Offset;
+        HiNib = (UINT8) (Offset >> 8);
+
+        // JMP FAR [CS:XXYY] => 2E FF 2E YY XX
+        InsnByte = 0;
+        JmpFar->InsnBuffer[InsnByte++] = 0x2E;  // CS override prefix
+        JmpFar->InsnBuffer[InsnByte++] = 0xFF;  // JMP (FAR)
+        JmpFar->InsnBuffer[InsnByte++] = 0x2E;  // ModRM (JMP memory location)
+        JmpFar->InsnBuffer[InsnByte++] = LoNib; // YY offset ...
+        JmpFar->InsnBuffer[InsnByte++] = HiNib; // XX offset ...
+
+        JmpFar->Rip = 0;
+        JmpFar->Segment = (UINT16) (ExchangeInfo->BufferStart >> 4);
+      }
       //
       // Wakeup all APs
       //
@@ -1656,7 +1897,7 @@ MpInitLibInitialize (
   ASSERT (MaxLogicalProcessorNumber != 0);
 
   AsmGetAddressMap (&AddressMap);
-  ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);
+  ApResetVectorSize = GetApResetVectorSize (&AddressMap);
   ApStackSize = PcdGet32(PcdCpuApStackSize);
   ApLoopMode  = GetApLoopMode (&MonitorFilterSize);
 
@@ -1715,6 +1956,8 @@ MpInitLibInitialize (
   CpuMpData->CpuInfoInHob     = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);
   InitializeSpinLock(&CpuMpData->MpLock);
   CpuMpData->SevEsIsEnabled = PcdGetBool (PcdSevEsIsEnabled);
+  CpuMpData->SevEsAPBuffer  = (UINTN) -1;
+  CpuMpData->GhcbBase       = PcdGet64 (PcdGhcbBase);
 
   //
   // Make sure no memory usage outside of the allocated buffer.
@@ -1773,6 +2016,7 @@ MpInitLibInitialize (
     // APs have been wakeup before, just get the CPU Information
     // from HOB
     //
+    OldCpuMpData->NewCpuMpData = CpuMpData;
     CpuMpData->CpuCount  = OldCpuMpData->CpuCount;
     CpuMpData->BspNumber = OldCpuMpData->BspNumber;
     CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
index a548fed23fa7..e17a351e5cfd 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
@@ -280,6 +280,25 @@ GetModeTransitionBuffer (
   return 0;
 }
 
+/**
+  Return the address of the SEV-ES AP jump table.
+
+  This buffer is required in order for an SEV-ES guest to transition from
+  UEFI into an OS.
+
+  @retval other   Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+  VOID
+  )
+{
+  //
+  // PEI phase doesn't need to do such transition. So simply return 0.
+  //
+  return 0;
+}
+
 /**
   Checks APs status and updates APs status if needed.
 
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
index 6298571e29b2..28f8e8e133e5 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
@@ -121,7 +121,7 @@ GetProtectedModeCS (
   GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
   for (Index = 0; Index < GdtEntryCount; Index++) {
     if (GdtEntry->Bits.L == 0) {
-      if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.L == 0) {
+      if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 1) {
         break;
       }
     }
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
index efb1bc2bf7cb..4f5a7c859a56 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
@@ -19,7 +19,7 @@ CPU_SWITCH_STATE_IDLE         equ        0
 CPU_SWITCH_STATE_STORED       equ        1
 CPU_SWITCH_STATE_LOADED       equ        2
 
-LockLocation                  equ        (RendezvousFunnelProcEnd - RendezvousFunnelProcStart)
+LockLocation                  equ        (SwitchToRealProcEnd - RendezvousFunnelProcStart)
 StackStartAddressLocation     equ        LockLocation + 04h
 StackSizeLocation             equ        LockLocation + 08h
 ApProcedureLocation           equ        LockLocation + 0Ch
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
index b74046b76af3..309d53bf3b37 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
@@ -215,6 +215,16 @@ CProcedureInvoke:
     jmp        $                 ; Never reach here
 RendezvousFunnelProcEnd:
 
+;-------------------------------------------------------------------------------------
+;SwitchToRealProc procedure follows.
+;NOT USED IN 32 BIT MODE.
+;-------------------------------------------------------------------------------------
+global ASM_PFX(SwitchToRealProc)
+ASM_PFX(SwitchToRealProc):
+SwitchToRealProcStart:
+    jmp        $                 ; Never reach here
+SwitchToRealProcEnd:
+
 ;-------------------------------------------------------------------------------------
 ;  AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
 ;-------------------------------------------------------------------------------------
@@ -263,6 +273,11 @@ ASM_PFX(AsmGetAddressMap):
     mov        dword [ebx + 0Ch], AsmRelocateApLoopStart
     mov        dword [ebx + 10h], AsmRelocateApLoopEnd - AsmRelocateApLoopStart
     mov        dword [ebx + 14h], Flat32Start - RendezvousFunnelProcStart
+    mov        dword [ebx + 18h], SwitchToRealProcEnd - SwitchToRealProcStart       ; SwitchToRealSize
+    mov        dword [ebx + 1Ch], SwitchToRealProcStart - RendezvousFunnelProcStart ; SwitchToRealOffset
+    mov        dword [ebx + 20h], SwitchToRealProcStart - Flat32Start               ; SwitchToRealNoNxOffset
+    mov        dword [ebx + 24h], 0                                                 ; SwitchToRealPM16ModeOffset
+    mov        dword [ebx + 28h], 0                                                 ; SwitchToRealPM16ModeSize
 
     popad
     ret
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
index 58ef369342a7..c92daaaffd6b 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
@@ -19,7 +19,7 @@ CPU_SWITCH_STATE_IDLE         equ        0
 CPU_SWITCH_STATE_STORED       equ        1
 CPU_SWITCH_STATE_LOADED       equ        2
 
-LockLocation                  equ        (RendezvousFunnelProcEnd - RendezvousFunnelProcStart)
+LockLocation                  equ        (SwitchToRealProcEnd - RendezvousFunnelProcStart)
 StackStartAddressLocation     equ        LockLocation + 08h
 StackSizeLocation             equ        LockLocation + 10h
 ApProcedureLocation           equ        LockLocation + 18h
@@ -41,3 +41,5 @@ ModeTransitionSegmentLocation       equ  LockLocation + 98h
 ModeHighMemoryLocation              equ  LockLocation + 9Ah
 ModeHighSegmentLocation             equ  LockLocation + 9Eh
 Enable5LevelPagingLocation          equ  LockLocation + 0A0h
+SevEsIsEnabledLocation              equ  LockLocation + 0A1h
+GhcbBaseLocation                    equ  LockLocation + 0A2h
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
index 87f2523e856f..6956b408d004 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
@@ -184,9 +184,97 @@ Releaselock:
     add        edi, StackStartAddressLocation
     add        rax, qword [edi]
     mov        rsp, rax
+
+    lea        edi, [esi + SevEsIsEnabledLocation]
+    cmp        byte [edi], 1        ; SevEsIsEnabled
+    jne        CProcedureInvoke
+
+    ;
+    ; program GHCB
+    ;   Each page after the GHCB is a per-CPU page, so the calculation programs
+    ;   a GHCB to be every 8KB.
+    ;
+    mov        eax, SIZE_4KB
+    shl        eax, 1                            ; EAX = SIZE_4K * 2
+    mov        ecx, ebx
+    mul        ecx                               ; EAX = SIZE_4K * 2 * CpuNumber
+    mov        edi, esi
+    add        edi, GhcbBaseLocation
+    add        rax, qword [edi]
+    mov        rdx, rax
+    shr        rdx, 32
+    mov        rcx, 0xc0010130
+    wrmsr
     jmp        CProcedureInvoke
 
 GetApicId:
+    lea        edi, [esi + SevEsIsEnabledLocation]
+    cmp        byte [edi], 1        ; SevEsIsEnabled
+    jne        DoCpuid
+
+    ;
+    ; Since we don't have a stack yet, we can't take a #VC
+    ; exception. Use the GHCB protocol to perform the CPUID
+    ; calls.
+    ;
+    mov        rcx, 0xc0010130
+    rdmsr
+    shl        rdx, 32
+    or         rax, rdx
+    mov        rdi, rax             ; RDI now holds the original GHCB GPA
+
+    mov        rdx, 0               ; CPUID function 0
+    mov        rax, 0               ; RAX register requested
+    or         rax, 4
+    wrmsr
+    rep vmmcall
+    rdmsr
+    cmp        edx, 0bh
+    jb         NoX2ApicSevEs        ; CPUID level below CPUID_EXTENDED_TOPOLOGY
+
+    mov        rdx, 0bh             ; CPUID function 0x0b
+    mov        rax, 040000000h      ; RBX register requested
+    or         rax, 4
+    wrmsr
+    rep vmmcall
+    rdmsr
+    test       edx, 0ffffh
+    jz         NoX2ApicSevEs        ; CPUID.0BH:EBX[15:0] is zero
+
+    mov        rdx, 0bh             ; CPUID function 0x0b
+    mov        rax, 0c0000000h      ; RDX register requested
+    or         rax, 4
+    wrmsr
+    rep vmmcall
+    rdmsr
+
+    ; Processor is x2APIC capable; 32-bit x2APIC ID is now in EDX
+    jmp        RestoreGhcb
+
+NoX2ApicSevEs:
+    ; Processor is not x2APIC capable, so get 8-bit APIC ID
+    mov        rdx, 1               ; CPUID function 1
+    mov        rax, 040000000h      ; RBX register requested
+    or         rax, 4
+    wrmsr
+    rep vmmcall
+    rdmsr
+    shr        edx, 24
+
+RestoreGhcb:
+    mov        rbx, rdx             ; Save x2APIC/APIC ID
+
+    mov        rdx, rdi             ; RDI holds the saved GHCB GPA
+    shr        rdx, 32
+    mov        eax, edi
+    wrmsr
+
+    mov        rdx, rbx
+
+    ; x2APIC ID or APIC ID is in EDX
+    jmp        GetProcessorNumber
+
+DoCpuid:
     mov        eax, 0
     cpuid
     cmp        eax, 0bh
@@ -253,12 +341,158 @@ CProcedureInvoke:
 
 RendezvousFunnelProcEnd:
 
+;-------------------------------------------------------------------------------------
+;SwitchToRealProc procedure follows.
+;ALSO THIS PROCEDURE IS EXECUTED BY APs TRANSITIONING TO 16 BIT MODE. HENCE THIS PROC
+;IS IN MACHINE CODE.
+;  SwitchToRealProc (UINTN BufferStart, UINT16 Code16, UINT16 Code32, UINTN StackStart)
+;  rcx - Buffer Start
+;  rdx - Code16 Selector Offset
+;  r8  - Code32 Selector Offset
+;  r9  - Stack Start
+;-------------------------------------------------------------------------------------
+global ASM_PFX(SwitchToRealProc)
+ASM_PFX(SwitchToRealProc):
+SwitchToRealProcStart:
+BITS 64
+    cli
+
+    ;
+    ; Get RDX reset value before changing stacks since the
+    ; new stack won't be able to accomodate a #VC exception.
+    ;
+    push       rax
+    push       rbx
+    push       rcx
+    push       rdx
+
+    mov        rax, 1
+    cpuid
+    mov        rsi, rax                    ; Save off the reset value for RDX
+
+    pop        rdx
+    pop        rcx
+    pop        rbx
+    pop        rax
+
+    ;
+    ; Establish stack below 1MB
+    ;
+    mov        rsp, r9
+
+    ;
+    ; Push ultimate Reset Vector onto the stack
+    ;
+    mov        rax, rcx
+    shr        rax, 4
+    push       word 0x0002                 ; RFLAGS
+    push       ax                          ; CS
+    push       word 0x0000                 ; RIP
+    push       word 0x0000                 ; For alignment, will be discarded
+
+    ;
+    ; Get address of "16-bit operand size" label
+    ;
+    lea        rbx, [PM16Mode]
+
+    ;
+    ; Push addresses used to change to compatibility mode
+    ;
+    lea        rax, [CompatMode]
+    push       r8
+    push       rax
+
+    ;
+    ; Clear R8 - R15, for reset, before going into 32-bit mode
+    ;
+    xor        r8, r8
+    xor        r9, r9
+    xor        r10, r10
+    xor        r11, r11
+    xor        r12, r12
+    xor        r13, r13
+    xor        r14, r14
+    xor        r15, r15
+
+    ;
+    ; Far return into 32-bit mode
+    ;
+o64 retf
+
+BITS 32
+CompatMode:
+    ;
+    ; Set up stack to prepare for exiting protected mode
+    ;
+    push       edx                         ; Code16 CS
+    push       ebx                         ; PM16Mode label address
+
+    ;
+    ; Disable paging
+    ;
+    mov        eax, cr0                    ; Read CR0
+    btr        eax, 31                     ; Set PG=0
+    mov        cr0, eax                    ; Write CR0
+
+    ;
+    ; Disable long mode
+    ;
+    mov        ecx, 0c0000080h             ; EFER MSR number
+    rdmsr                                  ; Read EFER
+    btr        eax, 8                      ; Set LME=0
+    wrmsr                                  ; Write EFER
+
+    ;
+    ; Disable PAE
+    ;
+    mov        eax, cr4                    ; Read CR4
+    btr        eax, 5                      ; Set PAE=0
+    mov        cr4, eax                    ; Write CR4
+
+    mov        edx, esi                    ; Restore RDX reset value
+
+    ;
+    ; Switch to 16-bit operand size
+    ;
+    retf
+
+BITS 16
+    ;
+    ; At entry to this label
+    ;   - RDX will have its reset value
+    ;   - On the top of the stack
+    ;     - Alignment data (two bytes) to be discarded
+    ;     - IP for Real Mode (two bytes)
+    ;     - CS for Real Mode (two bytes)
+    ;
+PM16Mode:
+    mov        eax, cr0                    ; Read CR0
+    btr        eax, 0                      ; Set PE=0
+    mov        cr0, eax                    ; Write CR0
+
+    pop        ax                          ; Discard alignment data
+
+    ;
+    ; Clear registers (except RDX and RSP) before going into 16-bit mode
+    ;
+    xor        eax, eax
+    xor        ebx, ebx
+    xor        ecx, ecx
+    xor        esi, esi
+    xor        edi, edi
+    xor        ebp, ebp
+
+    iret
+
+SwitchToRealProcEnd:
+
 ;-------------------------------------------------------------------------------------
 ;  AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
 ;-------------------------------------------------------------------------------------
 global ASM_PFX(AsmRelocateApLoop)
 ASM_PFX(AsmRelocateApLoop):
 AsmRelocateApLoopStart:
+BITS 64
     cli                          ; Disable interrupt before switching to 32-bit mode
     mov        rax, [rsp + 40]   ; CountTofinish
     lock dec   dword [rax]       ; (*CountTofinish)--
@@ -324,6 +558,11 @@ ASM_PFX(AsmGetAddressMap):
     mov        qword [rcx + 18h], rax
     mov        qword [rcx + 20h], AsmRelocateApLoopEnd - AsmRelocateApLoopStart
     mov        qword [rcx + 28h], Flat32Start - RendezvousFunnelProcStart
+    mov        qword [rcx + 30h], SwitchToRealProcEnd - SwitchToRealProcStart          ; SwitchToRealSize
+    mov        qword [rcx + 38h], SwitchToRealProcStart - RendezvousFunnelProcStart    ; SwitchToRealOffset
+    mov        qword [rcx + 40h], SwitchToRealProcStart - Flat32Start                  ; SwitchToRealNoNxOffset
+    mov        qword [rcx + 48h], PM16Mode - RendezvousFunnelProcStart                 ; SwitchToRealPM16ModeOffset
+    mov        qword [rcx + 50h], SwitchToRealProcEnd - PM16Mode                       ; SwitchToRealPM16ModeSize
     ret
 
 ;-------------------------------------------------------------------------------------
-- 
2.17.1


  parent reply	other threads:[~2020-04-23  4:33 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-22 17:41 [PATCH v7 00/43] SEV-ES guest support Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 01/43] MdeModulePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
2020-05-02  8:19   ` [edk2-devel] " Dong, Eric
2020-05-04 13:34     ` Lendacky, Thomas
2020-05-04 13:47       ` Dong, Eric
2020-05-04 16:41         ` Lendacky, Thomas
2020-05-05 15:29           ` Laszlo Ersek
2020-05-06  1:53             ` Dong, Eric
2020-05-06 13:19               ` Lendacky, Thomas
2020-05-06 15:06                 ` Dong, Eric
2020-05-06 18:33                   ` Lendacky, Thomas
2020-05-07  2:28                     ` Dong, Eric
2020-05-07  2:38                     ` Dong, Eric
2020-05-08 18:58                       ` Lendacky, Thomas
2020-05-06 16:24                 ` Laszlo Ersek
2020-04-22 17:41 ` [PATCH v7 02/43] UefiCpuPkg: Create PCD " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 03/43] MdePkg: Add the MSR definition for the GHCB register Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 04/43] MdePkg: Add a structure definition for the GHCB Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 05/43] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 06/43] MdePkg/BaseLib: Add support for the XGETBV instruction Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 07/43] MdePkg/BaseLib: Add support for the VMGEXIT instruction Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 08/43] UefiCpuPkg: Implement library support for VMGEXIT Lendacky, Thomas
2020-05-09  1:06   ` Dong, Eric
2020-05-09 14:08     ` Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 09/43] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 10/43] UefiPayloadPkg: Prepare UefiPayloadPkg " Lendacky, Thomas
2020-04-22 17:46   ` [edk2-devel] " Guo Dong
2020-04-22 17:41 ` [PATCH v7 11/43] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 12/43] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 13/43] UefiCpuPkg/CpuExceptionHandler: Support string IO " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 14/43] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 15/43] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 16/43] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO) Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 17/43] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 18/43] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 19/43] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 20/43] UefiCpuPkg/CpuExceptionHandler: Add support for INVD " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 21/43] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 22/43] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 23/43] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 24/43] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 25/43] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write " Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 26/43] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 27/43] OvmfPkg: Add support to perform SEV-ES initialization Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 28/43] OvmfPkg: Create a GHCB page for use during Sec phase Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 29/43] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 30/43] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 31/43] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 32/43] UefiCpuPkg: Create an SEV-ES workarea PCD Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 33/43] OvmfPkg: Reserve a page in memory for the SEV-ES usage Lendacky, Thomas
2020-04-30 18:58   ` [edk2-devel] " Laszlo Ersek
2020-04-30 21:12     ` Lendacky, Thomas
2020-04-30 22:09       ` Lendacky, Thomas
2020-05-05 15:25         ` Laszlo Ersek
2020-05-05 15:15       ` Laszlo Ersek
2020-04-22 17:41 ` [PATCH v7 34/43] OvmfPkg/ResetVector: Add support for a 32-bit SEV check Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 35/43] OvmfPkg/Sec: Add #VC exception handling for Sec phase Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 36/43] OvmfPkg/Sec: Enable cache early to speed up booting Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 37/43] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 38/43] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor Lendacky, Thomas
2020-04-22 17:41 ` [PATCH v7 39/43] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled Lendacky, Thomas
2020-04-23  4:33 ` Lendacky, Thomas [this message]
2020-04-23  4:33 ` [PATCH v7 41/43] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector Lendacky, Thomas
2020-04-23  4:33 ` [PATCH v7 42/43] OvmfPkg: Move the GHCB allocations into reserved memory Lendacky, Thomas
2020-04-23  4:33 ` [PATCH v7 43/43] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use Lendacky, Thomas
2020-05-08 19:16 ` [PATCH v7 00/43] SEV-ES guest support Lendacky, Thomas
2020-05-09  6:44   ` Ni, Ray
2020-05-09 14:34     ` Lendacky, Thomas
2020-05-09 19:09       ` [edk2-devel] " Andrew Fish
2020-05-11  5:24         ` Ni, Ray
2020-05-12 14:59           ` Lendacky, Thomas
2020-05-14 13:10             ` Ni, Ray
2020-05-14 17:59               ` Lendacky, Thomas
2020-05-15  5:47                 ` Ni, Ray
2020-05-15 14:30                   ` Lendacky, Thomas
2020-05-18 20:44                     ` Brian J. Johnson
2020-05-20  1:57                       ` 回复: " Fan Jeff
2020-05-12 16:49         ` Lendacky, Thomas
2020-05-12 17:44           ` Lendacky, Thomas
2020-05-12 20:10             ` Lendacky, Thomas
2020-05-11 15:37   ` Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=544dc0d6cf248a233378da864925da163014f07b.1587577317.git.thomas.lendacky@amd.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox