From: "Sami Mujawar" <sami.mujawar@arm.com>
To: devel@edk2.groups.io
Cc: Alexei.Fedorov@arm.com, Matteo.Carlini@arm.com,
Ben.Adderson@arm.com, steven.price@arm.com,
Lorenzo.Pieralisi@arm.com, michael.d.kinney@intel.com,
gaoliming@byosoft.com.cn, zhiguang.liu@intel.com,
ray.ni@intel.com, zhichao.gao@intel.com, nd@arm.com,
Ard Biesheuvel <ardb+tianocore@kernel.org>
Subject: Re: [edk2-devel] [PATCH v1 2/8] MdePkg: IORT header update for IORT Rev E.b spec
Date: Wed, 16 Jun 2021 19:56:36 +0100 [thread overview]
Message-ID: <556c20cb-7e32-205b-7857-add4aff908c9@arm.com> (raw)
In-Reply-To: <1688CEC74013EBBF.1864@groups.io>
Hi All,
I realised that setting EFI_ACPI_IO_REMAPPING_TABLE_REVISION to 3 (Rev
3) will break existing platforms as they would not be populating the
Identifier field in the IORT nodes. This can result in the Identifier
fileds being non-unique.
I will send out a v2 patch series that sets
EFI_ACPI_IO_REMAPPING_TABLE_REVISION to 0.
Regards,
Sami Mujawar
On 15/06/2021 05:36 PM, Sami Mujawar via groups.io wrote:
> Bugzilla: 3458 - Add support IORT Rev E.b specification updates
> (https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
>
> The IO Remapping Table, Platform Design Document, Revision E.b,
> Feb 2021 (https://developer.arm.com/documentation/den0049/)
> introduces the following updates, collectively including the
> updates and errata fixes to Rev E and Rev E.a:
> - increments the IORT table revision to 3.
> - updates the node definition to add an 'Identifier' field.
> - adds definition of node type 6 - Reserved Memory Range node.
> - adds definition for Memory Range Descriptors.
> - adds flag to indicate PRI support for root complexes.
> - adds flag to indicate if the root complex supports forwarding
> of PASID information on translated transactions to the SMMU.
>
> Therefore, update the IORT header file to reflect these changes.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> ---
> MdePkg/Include/IndustryStandard/IoRemappingTable.h | 67 ++++++++++++++++++--
> 1 file changed, 60 insertions(+), 7 deletions(-)
>
> diff --git a/MdePkg/Include/IndustryStandard/IoRemappingTable.h b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> index 731217441438a00dd5ff0bedf2010598d48d6dbf..c6f3e7bc321ea7d85e576b2fe3c2889422477506 100644
> --- a/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> +++ b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> @@ -1,12 +1,19 @@
> /** @file
> - ACPI IO Remapping Table (IORT) as specified in ARM spec DEN0049D
> -
> - http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
> + ACPI IO Remapping Table (IORT) definitions.
>
> Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
> - Copyright (c) 2018, ARM Limited. All rights reserved.<BR>
> + Copyright (c) 2018 - 2021, Arm Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Reference(s):
> + - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
> + (https://developer.arm.com/documentation/den0049/)
> +
> + @par Glossary:
> + - Ref : Reference
> + - Mem : Memory
> + - Desc : Descriptor
> **/
>
> #ifndef IO_REMAPPING_TABLE_H_
> @@ -14,7 +21,9 @@
>
> #include <IndustryStandard/Acpi.h>
>
> -#define EFI_ACPI_IO_REMAPPING_TABLE_REVISION 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV0 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV3 0x3
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REVISION EFI_ACPI_IO_REMAPPING_TABLE_REV3
>
> #define EFI_ACPI_IORT_TYPE_ITS_GROUP 0x0
> #define EFI_ACPI_IORT_TYPE_NAMED_COMP 0x1
> @@ -22,6 +31,7 @@
> #define EFI_ACPI_IORT_TYPE_SMMUv1v2 0x3
> #define EFI_ACPI_IORT_TYPE_SMMUv3 0x4
> #define EFI_ACPI_IORT_TYPE_PMCG 0x5
> +#define EFI_ACPI_IORT_TYPE_RMR 0x6
>
> #define EFI_ACPI_IORT_MEM_ACCESS_PROP_CCA BIT0
>
> @@ -55,7 +65,16 @@
> #define EFI_ACPI_IORT_SMMUv3_MODEL_CAVIUM_CN99XX 0x2
>
> #define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_UNSUPPORTED 0x0
> -#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED 0x1
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED BIT0
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_SUPPORTED BIT1
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_SUPPORTED BIT2
> +
> +#define EFI_ACPI_IORT_RMR_REMAP_NOT_PERMITTED 0x0
> +#define EFI_ACPI_IORT_RMR_REMAP_PERMITTED BIT0
>
> #define EFI_ACPI_IORT_ID_MAPPING_FLAGS_SINGLE BIT0
>
> @@ -89,7 +108,7 @@ typedef struct {
> UINT8 Type;
> UINT16 Length;
> UINT8 Revision;
> - UINT32 Reserved;
> + UINT32 Identifier;
> UINT32 NumIdMappings;
> UINT32 IdReference;
> } EFI_ACPI_6_0_IO_REMAPPING_NODE;
> @@ -198,6 +217,40 @@ typedef struct {
> //EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE OverflowInterruptMsiMapping[1];
> } EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE;
>
> +///
> +/// Memory Range Descriptor.
> +///
> +typedef struct {
> + /// Base address of Reserved Memory Range,
> + /// aligned to a page size of 64K.
> + UINT64 Base;
> +
> + /// Length of the Reserved Memory range.
> + /// Must be a multiple of the page size of 64K.
> + UINT64 Length;
> +
> + /// Reserved, must be zero.
> + UINT32 Reserved;
> +} EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC;
> +
> +///
> +/// Node type 6: Reserved Memory Range (RMR) node
> +///
> +typedef struct {
> + EFI_ACPI_6_0_IO_REMAPPING_NODE Node;
> +
> + /// RMR flags
> + UINT32 Flags;
> +
> + /// Memory range descriptor count.
> + UINT32 NumMemRangeDesc;
> +
> + /// Offset of the memory range descriptor array.
> + UINT32 MemRangeDescRef;
> +// EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE IdMapping[1];
> +// EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC MemRangeDesc[1];
> +} EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE;
> +
> #pragma pack()
>
> #endif
prev parent reply other threads:[~2021-06-16 18:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 16:36 [PATCH v1 0/8] IORT Rev E.b specification updates Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 1/8] MdePkg: Fix IORT header file include guard Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 2/8] MdePkg: IORT header update for IORT Rev E.b spec Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 3/8] ShellPkg: Acpiview: Abbreviate field names to preserve alignment Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 4/8] ShellPkg: Acpiview: IORT parser update for IORT Rev E.b spec Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 5/8] DynamicTablesPkg: IORT set reference to Id array only if present Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 6/8] DynamicTablesPkg: IORT set reference to interrupt array " Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 7/8] DynamicTablesPkg: Update ArmNameSpaceObjects for IORT Rev E.b Sami Mujawar
2021-06-15 16:36 ` [PATCH v1 8/8] DynamicTablesPkg: IORT generator updates for Rev E.b spec Sami Mujawar
[not found] ` <1688CEC74013EBBF.1864@groups.io>
2021-06-16 18:56 ` Sami Mujawar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556c20cb-7e32-205b-7857-add4aff908c9@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox