public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format
@ 2017-03-30  8:23 Song, BinX
  2017-03-30  8:39 ` Gao, Liming
  0 siblings, 1 reply; 2+ messages in thread
From: Song, BinX @ 2017-03-30  8:23 UTC (permalink / raw)
  To: edk2-devel@lists.01.org; +Cc: Gao, Liming

V2:
- Update correct patch info

V1:
- Add x mode for Brotli and BrotliCompress
- Change Brotli and BrotliCompress format from DOS to UNIX

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
---
 BaseTools/BinWrappers/PosixLike/Brotli         | 58 +++++++++---------
 BaseTools/BinWrappers/PosixLike/BrotliCompress | 84 +++++++++++++-------------
 2 files changed, 71 insertions(+), 71 deletions(-)
 mode change 100644 => 100755 BaseTools/BinWrappers/PosixLike/Brotli
 mode change 100644 => 100755 BaseTools/BinWrappers/PosixLike/BrotliCompress

diff --git a/BaseTools/BinWrappers/PosixLike/Brotli b/BaseTools/BinWrappers/PosixLike/Brotli
old mode 100644
new mode 100755
index a244ecc..0945d86
--- a/BaseTools/BinWrappers/PosixLike/Brotli
+++ b/BaseTools/BinWrappers/PosixLike/Brotli
@@ -1,29 +1,29 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
+#!/usr/bin/env bash
+
+full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
+dir=$(dirname "$full_cmd")
+cmd=${full_cmd##*/}
+
+if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
+then
+  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
+elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
+then
+  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
+  then
+    echo "BaseTools C Tool binary was not found ($cmd)"
+    echo "You may need to run:"
+    echo "  make -C $EDK_TOOLS_PATH/Source/C"
+  else
+    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
+  fi
+elif [ -e "$dir/../../Source/C/bin/$cmd" ]
+then
+  exec "$dir/../../Source/C/bin/$cmd" "$@"
+else
+  echo "Unable to find the real '$cmd' to run"
+  echo "This message was printed by"
+  echo "  $0"
+  exit 127
+fi
+
diff --git a/BaseTools/BinWrappers/PosixLike/BrotliCompress b/BaseTools/BinWrappers/PosixLike/BrotliCompress
old mode 100644
new mode 100755
index a571ff6..59c6465
--- a/BaseTools/BinWrappers/PosixLike/BrotliCompress
+++ b/BaseTools/BinWrappers/PosixLike/BrotliCompress
@@ -1,42 +1,42 @@
-#!/usr/bin/env bash
-#
-# This script will exec Brotli tool.
-#
-# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution.  The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-LVL="--quality 9"
-
-while [ $# != 0 ];do
-  case $1 in
-    -d)
-      ARGS+="--decompress "
-    ;;
-    -e)
-    ;;
-    -g)
-      ARGS+="--gap $2 "
-      shift
-    ;;
-    -l)
-      LVL="--quality $2 "
-      shift
-    ;;
-    -o)
-      ARGS+="--output $2 "
-      shift
-    ;;
-    *)
-      ARGS+="--input $1 "
-  esac
-
-shift
-done
-
-exec Brotli $ARGS $LVL
+#!/usr/bin/env bash
+#
+# This script will exec Brotli tool.
+#
+# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution.  The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+LVL="--quality 9"
+
+while [ $# != 0 ];do
+  case $1 in
+    -d)
+      ARGS+="--decompress "
+    ;;
+    -e)
+    ;;
+    -g)
+      ARGS+="--gap $2 "
+      shift
+    ;;
+    -l)
+      LVL="--quality $2 "
+      shift
+    ;;
+    -o)
+      ARGS+="--output $2 "
+      shift
+    ;;
+    *)
+      ARGS+="--input $1 "
+  esac
+
+shift
+done
+
+exec Brotli $ARGS $LVL
-- 
2.10.2.windows.1



^ permalink raw reply related	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-30  8:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-30  8:23 [PATCH V2] BaseTools: Update Brotli and BrotliCompress mode and format Song, BinX
2017-03-30  8:39 ` Gao, Liming

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox