From: Ming Huang <ming.huang@linaro.org>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: linaro-uefi@lists.linaro.org, edk2-devel@lists.01.org,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
michael.d.kinney@intel.com, lersek@redhat.com,
wanghuiqiang@huawei.com, huangming23@huawei.com,
zhangjinsong2@huawei.com, huangdaode@hisilicon.com,
john.garry@huawei.com, xinliang.liu@linaro.org,
zhangfeng56@huawei.com
Subject: Re: [PATCH edk2-platforms v1 12/16] Hisilicon/D06: Use new flash layout
Date: Wed, 13 Feb 2019 12:43:17 +0800 [thread overview]
Message-ID: <5e49dd77-5141-0809-2a00-989d6ff03cbe@linaro.org> (raw)
In-Reply-To: <20190211145436.arcms5iqpu6vah7f@bivouac.eciton.net>
On 2/11/2019 10:54 PM, Leif Lindholm wrote:
> On Fri, Feb 01, 2019 at 09:34:32PM +0800, Ming Huang wrote:
>> In new flash layout, BIOS fd change from offset 1M to 8M in 16M
>> spi flash.
>
> This bit
>
>> Use the new CustomData.Fv which indicate the offset
>> of fd and which flash area can be updated for BMC.
>
> is of critical importance. Should be its own paragraph.
>
> How does this change affect variable storage? Will the server maintain
> state after a firmware upgrade, or will the operator need to rescue it
> manually via the BMC?
As the address of variable is change, need to update via the BMC for 19.02.
Thanks
>
> /
> Leif
>
>>
>> This patch is relative with patch "Use new flash layout" in
>> edk2-non-osi.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Ming Huang <ming.huang@linaro.org>
>> ---
>> Platform/Hisilicon/D06/D06.fdf | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/Platform/Hisilicon/D06/D06.fdf b/Platform/Hisilicon/D06/D06.fdf
>> index d495ad7f264c..f72b513352fb 100644
>> --- a/Platform/Hisilicon/D06/D06.fdf
>> +++ b/Platform/Hisilicon/D06/D06.fdf
>> @@ -29,7 +29,7 @@ [DEFINES]
>> ################################################################################
>> [FD.D06]
>>
>> -BaseAddress = 0x204100000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
>> +BaseAddress = 0x204800000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
>>
>> Size = 0x00400000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
>> ErasePolarity = 1
>> @@ -124,7 +124,7 @@ [FD.D06]
>> 0x003E0000|0x00010000
>>
>> 0x003F0000|0x00010000
>> -FILE = Platform/Hisilicon/D0x-CustomData.Fv
>> +FILE = Platform/Hisilicon/D06/CustomData.Fv
>>
>> ################################################################################
>> #
>> --
>> 2.9.5
>>
next prev parent reply other threads:[~2019-02-13 4:43 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 13:34 [PATCH edk2-platforms v1 00/16] Fix issues and improve D0x Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 01/16] Hisilicon/D0x: Remove SerdesLib Ming Huang
2019-02-11 15:05 ` Leif Lindholm
2019-02-13 6:36 ` Ming Huang
2019-02-13 9:42 ` Leif Lindholm
2019-02-13 11:39 ` Ming Huang
2019-02-14 10:51 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 02/16] Hisilicon/D0x: Add DriverHealthManagerDxe Ming Huang
2019-02-11 15:20 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 03/16] Hisilicon/D06: Optimize SAS driver for reducing boot time Ming Huang
2019-02-12 15:12 ` Leif Lindholm
2019-02-13 6:01 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 04/16] Hisilicon/D06: Fix access variable fail issue Ming Huang
2019-02-12 15:17 ` Leif Lindholm
2019-02-13 2:21 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 05/16] Hisilicon/D06: Add more PCIe port INT-x support Ming Huang
2019-02-11 17:05 ` Leif Lindholm
2019-02-12 12:27 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 06/16] Hisilicon/D06: Add OemGetCpuFreq to encapsulate difference Ming Huang
2019-02-11 17:15 ` Leif Lindholm
2019-02-13 2:29 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 07/16] Hisilicon/D0x: Rename StartupAp() function Ming Huang
2019-02-11 18:04 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 08/16] Hisilicon/D06: Change HCCS speed from 30G to 26G Ming Huang
2019-02-11 18:36 ` Leif Lindholm
2019-02-12 14:45 ` Ming Huang
2019-02-12 14:59 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 09/16] Hisilicon/D06: Add PCI_OSC_SUPPORT Ming Huang
2019-02-11 18:51 ` Leif Lindholm
2019-02-13 2:59 ` Ming Huang
2019-02-13 9:08 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 10/16] Hisilicon/D06: Modify for M7 self-Adapte support Ming Huang
2019-02-11 19:28 ` Leif Lindholm
2019-02-12 15:14 ` Ming Huang
2019-02-12 15:46 ` Leif Lindholm
2019-02-13 4:38 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 11/16] Hisilicon/D06: Add Setup Item "Support DPC" Ming Huang
2019-02-11 19:46 ` Leif Lindholm
2019-02-12 15:22 ` Ming Huang
2019-02-12 15:49 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 12/16] Hisilicon/D06: Use new flash layout Ming Huang
2019-02-11 14:54 ` Leif Lindholm
2019-02-13 4:43 ` Ming Huang [this message]
2019-02-01 13:34 ` [PATCH edk2-platforms v1 13/16] Hisilicon/D06: Remove SECURE_BOOT_ENABLE definition Ming Huang
2019-02-11 19:47 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 14/16] Hisilicon/D0x: Remove SP805 watchdog pcd Ming Huang
2019-02-11 19:48 ` Leif Lindholm
2019-02-15 14:18 ` [PATCH edk2-platforms v1 00/16] Fix issues and improve D0x Ming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5e49dd77-5141-0809-2a00-989d6ff03cbe@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox